首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
In order to describe and explain the effect of bowing of marble facade panels, neutron time-of-flight diffraction was applied to determine residual macro- and microstrain on the calcite mineral phase. The measurements were combined with investigations of the crystallographic preferred orientation (texture) measurements by neutron diffraction, macroscopic measuring of the bowing on marble building stones, as well as microfabric analyses. Three samples were investigated to explain the bowing effect: a fresh broken sample, a good conditioned facade panel and a strongly deformed facade panel. Residual intracrystalline strain was detected in all investigated samples, which differed in the degree of bowing. For the first time, the preferred orientation and the residual strain were found to be related. The results show that different strain magnitudes are reflected by residual strains, which differ significantly in magnitude and direction. Furthermore, different Bragg peak widths have been detected as an indication of microscopic strain. The observed residual strain values in the samples are related with the grain shape and texture properties.  相似文献   

2.
The lattice-preferred orientation (LPOs) of two late-Variscan granitoids, the Meissen monzonite and the Podlesí dyke granite, were determined from high-resolution time-of-flight neutron diffraction patterns gained at the diffractometer SKAT in Dubna, Russia. The results demonstrate that the method is suitable for the LPO analysis of polyphase, relatively coarse-grained (0.1–6 mm) rocks. The Meissen monzonite has a prominent shape-preferred orientation (SPO) of the non-equidimensional minerals feldspar, mica and amphibole, whereas SPO of the Podlesí granite is unapparent at the hand-specimen scale. The neutron diffraction data revealed distinct LPOs in both granitoids. The LPO of the non-equidimensional minerals feldspar, mica and amphibole developed mainly during magmatic flow. In the case of the Meissen monzonite, the magmatic flow was superimposed by regional shear tectonics, which, however, had no significant effect on the LPOs. In both samples, quartz shows a weak but distinct LPO, which is atypical for plastic deformation and different in the syn-kinematic Meissen monzonite and the post-kinematic Podlesí granite. We suggest that, first of all, the quartz LPO of the Meissen monzonite is the result of oriented growth in an anisotropic stress field. The quartz LPO of the Podlesí granite, which more or less resembles a deformational LPO in the flattening field of the local strain field, developed during magmatic flow, whereby the rhombohedral faces of the quartz crystals adhered to the (010) faces of aligned albite and to the (001) faces of zinnwaldite. Due to shape anisotropy of their attachments, the quartz crystals were passively aligned by magmatic flow. Thus, magmatic flow and oriented crystal growth are the major LPO-forming processes in both granitoids. For the Meissen monzonite, the solid-state flow was too weak to cause significant crystallographic re-orientation of the minerals aligned by magmatic flow. Finally, the significance of our results for the evaluation of the regional tectonic environment during magma emplacement is discussed. The discussion on the regional implications of the more methodologically oriented results provides the basis for future, more regionally aimed studies in view of the fabric characteristics of such plutons and their developing mechanisms.  相似文献   

3.
The Rhuddnant Grits turbidite system was deposited within an elongate, fault-bounded trough in the late Llandovery (Telychian) Welsh Basin. Two groups of sandstones are identified within the system: high-matrix sandstones and laminated sandstones. The high-matrix sandstones are medium to very thick bedded, fine to very coarse-grained muddy sandstones. The high-matrix sandstone beds are almost entirely structureless and have several features indicative of deposition from high density turbidity currents, probably undergoing late stage debris flow behaviour (e.g. grain size discontinuities, inverse grading, floating clasts). The laminated sandstones are thin to very thin bedded, fine-grained and have a distinctive mud/silt lamination. Tractional structures and convolution are common in these beds. They were probably deposited by slow moving, dilute turbidity currents. Dissimilar palaeocurrent vectors and estimates of flow properties from the two types of sandstone support the contrasting nature of the depositing flows. A coarsening and thickening upwards trend is identified in the laminated sandstones of the Rhuddnant Grits Formation. This trend is not reflected in the high-matrix sandstone beds. Although the high-matrix sandstones appear in packets or groups within the laminated sandstone background, they were otherwise deposited in an entirely random manner throughout the exposed system. This may suggest that the two types of sandstone are the result of different triggering mechanisms at source, or of contrasting flow properties developed early in the flow histories.  相似文献   

4.
湖南邵阳市邵阳大道两侧出露的龙潭组下段(中二叠世茅口期晚期)发育一套地质特征典型、沉积序列明显的重力流沉积。重力流沉积以块状砂岩、粉砂岩及泥岩互层为主,砂岩底面发育有重荷模、槽模、工具痕及冲刷充填构造,砂岩内部有块状层理、平行层理、包卷层理及粒序层理,互层的泥岩中见类似于古网迹的痕迹化石。可识别出砂质碎屑流、浊流与滑塌沉积。剖面下部含泥砾块状砂岩发育,剖面中上部以发育薄到中厚层砂岩、粉砂岩与泥岩互层为特点。根据重力流沉积物特征及其垂向序列特征,建立了重力流沉积模式,将海底扇划分出内扇、中扇与外扇。通过与附近的短陂桥矿区的龙潭组下段沉积特征进行对比研究,结合华南地区岩相古地理特征,认为位于华南盆地范围的邵阳地区,在中二叠世茅口期晚期(龙潭组下段)发育的重力流沉积,可能意味着华南盆地在扬子陆块和华夏陆块之间的深大断裂在中二叠世末期曾经发生拉张,形成裂谷盆地。  相似文献   

5.
顺层岩质边坡开挖模型试验及稳定性影响因素分析   总被引：14，自引：3，他引：11  
用地质力学模型试验方法,对顺层岩质边坡进行开挖破坏试验。同时在有限元分析的基础上,采用多层结构模型对顺层岩质路堑边坡稳定性的影响因素进行了分析。指出当边坡走向与岩层走向夹角超过30后,边坡发生顺层滑动破坏的可能性很小,基本上可不视为顺层边坡。同时也阐明了岩层倾角以及结构面抗剪强度对顺层岩质边坡稳定性的影响。文中结论可为顺层岩质边坡的科研、设计和施工提供参考。  相似文献   

6.
Mechanical Dauphiné twinning in quartz has been of long-standing interest, both in single crystals and polycrystalline aggregates. This study investigates texture development in fine-grained quartz rock novaculite with no initial texture using compression experiments conducted in the Paterson gas apparatus to explore the influence of stress and temperature. Texture patterns are measured with time-of-flight neutron diffraction and hard synchrotron X-rays, analyzing diffraction data with the Rietveld method. Similar texture patterns are observed as described previously but the new results establish a profound influence of temperature and document that twinning initiates at stresses less than 50 MPa. Possibilities of using Dauphiné twinning as a paleopiezometer in quartz-bearing rocks are discussed.  相似文献   

7.
Field investigation and laboratory research on flysch of the Liufengguan Group in Qinling indicate the following: (1) Sandstone of the Liufengguan Group is categorized as feldspathic lithic graywacke with a minor amount of lithic graywacke in the QFR triangular diagram. Grain size≤0.3 mm. Bedding plane structures such as groove casts and suspected flute casts can be found at the bottom of the sandstone. It is inferred that currents may have come from the southeast during deposition. Bedding structures such as ripple marks, graded bedding, parallel bedding, small-scale cross bedding, climbing bedding, suspected convolute bedding, microlamination and sliding structures have also been observed, which are of indicative significance. It is thought that the Liufengguan Group has the sedimentary characteristics of bedding, bedding plane structures and lithological assemblages of deep-sea low-density turbidity current deposits. The vertical succession of the Bouma sequence in the inner fan subfacies zone is generally incomplete: the assemblage of Ta and Tabc is commonly seen; the succession of the middle fan subfacies zone is relatively complete; and divisions Te and Tb are common in the outer fan subfacies zone. (2) The flysh of the Liufengguan Group is a sequence of deep-sea argillaceous-arenaceous submarine fan deposits, in which the authors recognize the inner, middle and outer fan subfacies and also nine types of lithofacies: normal graded sandstone (A1), medium- to thick-bedded, fine-grained sandstone (A2), medium- to thick-bedded and massive siltstone (A3), thin-bedded, fine-grained sandstone and mudstone (B1), irregular interbeds of thin-bedded, fine-grained sandstone and siltstone (B2), thin-bedded, fine-grained sandstone (C1), very thin-bedded, fine-grained sandstone (D1), olistostromes (E1) and deep-sea mudstone (F). The inner fan consists of four microfacies: natural levee (A1), water channel (A2, A3) and olistostrome (E1); in the middle fan there also occur four microfacies, i.e., branch channel (B1), branch channel (B2), interdistributary bay (D1) and olistostrome. The outer fan is made up of the branch channel (C1) and sheet sand (D1) microfacies, which alternate vertically with sediments of deep-sea plain subfacies (F). There occur fining- and thinning-upward channel deposits in the outer-fan subfacies zone of the submarine fan of the Liufengguan Group observed in this study. The quartz content of the graywacke of the deposits is all higher than 40% and may reach as high as 60%. Therefore, on the basis of the aforementioned features, this flysh should be formed in a passive continental-margin tectonic environment.  相似文献   

8.
The Sierra Grande Formation (Silurian-Early Devonian) consists of quartz arenites associated with clast supported conglomerates, mudstones, shales and ironstones. Eight sedimentary facies are recognized: cross-stratified and massive sandstone, plane bedded sandstone, ripple laminated sandstone, interstratified sandstone and mudstone, laminated mudstone and shale, oolitic ironstone, massive conglomerate and sheet conglomerate lags. These facies are interpreted as shallow marine deposits, ranging from foreshore to inner platform environments. Facies associations, based on vertical relationships among lithofacies, suggest several depositional zones: (a) beach to upper shoreface, with abundant plane bedded and massive bioturbated sandstones; (b) upper shoreface to breaker zone, characterized by multistorey cross-stratified and massive sandstone bodies interpreted as subtidal longshore-flow induced sand bars; (c) subtidal, nearshore tidal sand bars, consisting of upward fining sandstone sequences; (d) lower shoreface zone, dominated by ripple laminated sandstone, associated with cross-stratified and horizontal laminated sandstone, formed by translatory and oscillatory flows; and (e) transitional nearshore-offshore and inner platform zones, with heterolithic and pelitic successions, and oolitic ironstone horizons. Tidal currents, fair weather waves and storm events interacted during the deposition of the Sierra Grande Formation. However, the relevant features of the siliciclastics suggest that fair weather and storm waves were the most important mechanisms in sediment accumulation. The Silurian-Lower Devonian platform was part of a continental interior sag located between southern South America and southern Africa. The Sierra Grande Formation was deposited during a second order sea level rise, in which a shallow epeiric sea flooded a deeply weathered low relief continent.  相似文献   

9.
以下刚果盆地下白垩统巴雷姆阶Pointe Indienne组中段为例,采用深水沉积学理论,结合重力流的最新研究进展,利用研究区最新钻井岩心资料及分析测试数据,对其岩性、沉积构造类型和岩石学特征等进行了探讨分析,识别出研究区广泛存在重力流沉积,并总结了该重力流的深水沉积过程及其砂体发育概念模型。结果表明: 重力流沉积以中—细砂岩为主,砂岩底部发育槽模、重荷模、火焰状构造及球枕构造,砂岩内部有正粒序层理、平行层理、爬升波纹层理、包卷层理、泄水构造及漂浮泥砾;重力流砂岩主要为长石岩屑质石英砂岩,分选差、次棱—次圆状,以悬浮搬运机制为主,砂岩粒度累积概率曲线有全悬浮总体的“一段式”和高悬浮总体的“两段式”可识别出滑动、滑塌、砂质碎屑流、泥质碎屑流和浊流5种重力流流体类型及其在垂向上的6种相序组合类型;研究区重力流砂体横向连续性较好,垂向叠置厚度较厚,可形成规模较大的油气藏。  相似文献   

10.
Taking the middle Pointe Indienne Formation of the Lower Cretaceous Barremian in the Lower Congo Basin as an example,based on the theory of deep-water sedimentology,combined with the latest research progress of gravity-flow,and with the help of the latest drilling core data and its analyzing test results in the study area,the lithology,sedimentary structure types and petrological characteristics were investigated. It is found that gravity-flow deposits were widely developed in the middle Pointe Indienne Formation of the study area. The deposition process and the conceptual model of sand-body development for the deep-water gravity-flow have also been summarized. The gravity-flow deposits are mainly composed of midium-fine grained sandstone where the flute cast,load cast,flame structure,ball and pillow structure are occurred at the bottom and the normal graded bedding,parallel bedding,climbing ripple bedding,convolute bedding,water escape structure and floating mud gravel are occurred in the internal part. The gravity flow sandstones whose transportation mechanism are dominated by suspension transport are mainly feldspathic detrital quartz sandstones which are poorly sorted,sub angular and sub rounded. Grainsize accumulation probability curve are characterized by both “one-segment” which suggests total suspension population and “two-segment” which suggests high suspension population. Five fluid types of gravity-flows including,slump,sandy debris flow,muddy debris flow and turbidity can be identified,and six styles of facies combination in vertical direction have been recognized. The gravity-flow sand-body in the study area can form large-scale oil and gas reservoir due to the better lateral continuity and the thicker vertical stack thickness.  相似文献   

11.
The behaviour of quartz during metamorphism is studied based on two case studies from the Barrovian terrains of Sulitjelma in arctic Scandinavia and Loch Tay in the Central Highlands Dalradian of Scotland. Both terrains preserve evidence for metamorphism in pelites involving nucleation and growth of garnet at different times in the deformation history. Data are presented on the size, shape and crystallographic orientation of quartz preserved as inclusions in garnet and as grains in the surrounding matrix. While quartz-grains remain small and dispersed between mica grains, deformation appears to be dominated by grain-boundary sliding accommodated by dissolution–precipitation. At amphibolite facies, textural coarsening occurs by dissolution of small quartz grains and growth of larger quartz grains, coupled with segregation of quartz from mica. As a result, quartz deforms by dislocation creep, developing crystallographic preferred orientations (CPO) consistent with both coaxial and non-coaxial strain. Quartz CPOs with <0001> axes lying parallel to foliation and stretching direction are commonly developed, and best explained by mechanical rotation of inequant (detrital?) quartz grains. There is no evidence for selective entrapment of quartz inclusions in garnet on the basis of quartz crystallographic orientation.  相似文献   

12.
Mechanical twinning in polycrystalline quartz was investigated in situ with time-of-flight neutron diffraction and a strain diffractometer. Dauphiné twinning is highly temperature sensitive. It initiates at a macroscopic differential stress of 50–100 MPa and, at 500°C, saturates at 400 MPa. From normalized diffraction intensities the patterns of preferred orientation (or texture) can be inferred. They indicate a partial reversal of twinning during unloading. The remaining twins impose residual stresses corresponding to elastic strains of 300–400 microstrain. Progressive twinning on loading and reversal during unloading, as well as the temperature dependence, can be reproduced with finite element model simulations.  相似文献   

13.
Facies models for regressive, tide‐influenced deltaic systems are under‐represented in the literature compared with their fluvial‐dominated and wave‐dominated counterparts. Here, a facies model is presented of the mixed, tide‐influenced and wave‐influenced deltaic strata of the Sego Sandstone, which was deposited in the Western Interior Seaway of North America during the Late Cretaceous. Previous work on the Sego Sandstone has focused on the medial to distal parts of the outcrop belt where tides and waves interact. This study focuses on the proximal outcrop belt, in which fluvial and tidal processes interact. Five facies associations are recognized. Bioturbated mudstones (Facies Association 1) were deposited in an offshore environment and are gradationally overlain by hummocky cross‐stratified sandstones (Facies Association 2) deposited in a wave‐dominated lower shoreface environment. These facies associations are erosionally overlain by tide‐dominated cross‐bedded sandstones (Facies Association 4) interbedded with ripple cross‐laminated heterolithic sandstones (Facies Association 3) and channelized mudstones (Facies Association 5). Palaeocurrent directions derived from cross‐bedding indicate bidirectional currents which are flood‐dominated in the lower part of the studied interval and become increasingly ebb‐directed/fluvial‐directed upward. At the top of the succession, ebb‐dominated/fluvial‐dominated, high relief, narrow channel forms are present, which are interpreted as distributary channels. When distributary channels are abandoned they effectively become estuaries with landward sediment transport and fining trends. These estuaries have sandstones of Facies Association 4 at their mouth and fine landward through heterolithic sandstones of Facies Association 3 to channelized mudstones of Facies Association 5. Therefore, the complex distribution of relatively mud‐rich and sand‐rich deposits in the tide‐dominated part of the lower Sego Sandstone is attributed to the avulsion history of active fluvial distributaries, in response to a subtly expressed allogenic change in sediment supply and relative sea‐level controls and autocyclic delta lobe abandonment.  相似文献   

14.
石英结晶学优选与应用   总被引：10，自引：0，他引：10  
石英集合体的结晶学优选可由位错滑移、双晶滑移、定向成核与生长等形成,其中位错滑移是塑性变形岩石中石英结晶学优选产生的最重要的机制。影响变形石英结晶学优选的因素有温度、应变速率、应变、差应力、水、复矿物岩石中各种矿物间的相互作用、初始结晶学方向等。系统总结了石英晶体变形与滑移系,结晶学优选的测量与表达,多种条件下石英的结晶学优选,以及在判断剪切方向、计算运动学涡度、判定变形温度、分析变形历史等方面的应用,并认为应用石英组构作运动学和动力学解析时需与其它微观、宏观现象相结合。  相似文献   

15.
The Ganurgarh shale, a formation belonging to the Bhander Group of Vindhyan basin is investigated using field based detailed lithofacies and petrofacies analyses in order to interpret the depositional environment in a sequence stratigraphic context. Five major lithofacies have been recognized consisting of calcareous sandstones, laminated mudstones, rippled siltstones, red-grey shales and sandy limestones characterized by small to large-scale cross-bedding, ripple cross-lamination of wave and current origin, parallel lamination, low-angle horizontal bedding, flaser and lenticular bedding, mud-cracks, salt pseudomorphs, convolute bedding and load structures. The constituent lithofacies are recurring and grouped into three lithofacies associations where, the association A is composed of fining upwards and B with coarsening upwards cycles at the lower and middle levels of the succession respectively, are dominantly arenaceous whereas, the association C occurring at upper levels is fining upwards (FU) and becomes calcareous with meager representation of clastics. Petrographically, the section offers three main petrofacies viz., (a) sandstone- (b) siltstone- (c) sandy limestone-petrofacies. Lithofacies characters complimented with petrography show that deposition occurred within the shoreface (subtidal) to foreshore intertidal domain involving tidal flats with sub-environments ranging from intertidal to supratidal. However, lithofacies associations within the Ganurgarh shale of Maihar area represent a case of normal regression during sea level transgression. In the beginning, probably because of excessive sediment supply the sea level had a falling trend during an overall transgressive phase ultimately culminating into limestone sedimentation.  相似文献   

16.
The bowing of natural stone panels is especially known for marble slabs. The bowing of granite is mainly known from tombstones in subtropical humid climate. Field inspections in combination with laboratory investigations with respect to the thermal expansion and the bowing potential was performed on two different granitoids (Cezlak granodiorite and Flossenbürg granite) which differ in the composition and rock fabrics. In addition, to describe and explain the effect of bowing of granitoid facade panels, neutron time-of-flight diffraction was applied to determine residual macro- and microstrain. The measurements were combined with investigations of the crystallographic preferred orientation of quartz and biotite. Both samples show a significant bowing as a function of panel thickness and destination temperature. In comparison to marbles the effect of bowing is more pronounced in granitoids at temperatures of 120°C. The bowing as well as the thermal expansion of the Cezlak sample is also anisotropic with respect to the rock fabrics. A quantitative estimate was performed based on the observed textures. The effect of the locked-in stresses may also have a control on the bowing together with the thermal stresses related to the different volume expansion of the rock-forming minerals.  相似文献   

17.
《Journal of Structural Geology》2002,24(6-7):1125-1137
Dynamically recrystallized and sutured quartz grains from metamorphic rocks with different strain intensities and temperature conditions ranging from ca. 350°C to ca. 700°C have been studied. Universal-stage measurements on quartz–quartz high-angle grain boundaries show that they are never curved but always consist of straight segments which preferentially occupy specific crystallographic orientations in relation to both neighboring crystals. With increasing temperature the segments preferentially concentrate in a decreasing number of orientations, mainly near the rhombohedral {101&#x0304;1} planes. The crystallographic data and the observations on grain boundary geometries suggest that: (i) grain boundary orientations are strongly crystallographically controlled, (ii) this control is the main factor on the textural equilibration of quartz–quartz grain boundaries in metamorphic rocks, and (iii) grain boundaries from dynamically recrystallized quartz should be regarded as annealed and equilibrated fabrics that are stable against subsequent annealing as long as the material is not re-deformed.  相似文献   

18.
Gold mineralization at Jonnagiri, Dharwar Craton, southern India, is hosted in laminated quartz veins within sheared granodiorite that occur with other rock units, typical of Archean greenstone–granite ensembles. The proximal alteration assemblage comprises of muscovite, plagioclase, and chlorite with minor biotite (and carbonate), which is distinctive of low- to mid-greenschist facies. The laminated quartz veins that constitute the inner alteration zone, contain muscovite, chlorite, albite and calcite. Using various calibrations, chlorite compositions in the inner and proximal zones yielded comparable temperature ranges of 263 to 323 °C and 268 to 324 °C, respectively. Gold occurs in the laminated quartz veins both as free-milling native metal and enclosed within sulfides. Fluid inclusion microthermometry and Raman spectroscopy in quartz veins within the sheared granodiorite in the proximal zone and laminated auriferous quartz veins in inner zone reveal the existence of a metamorphogenic aqueous–gaseous (H2O–CO2–CH4 + salt) fluid that underwent phase separation and gave rise to gaseous (CO2–CH4), low saline (~ 5 wt.% NaCl equiv.) aqueous fluids. Quartz veins within the mylonitized granodiorites and the laminated veins show broad similarity in fluid compositions and P–T regime. Although the estimated P–T range (1.39 to 2.57 kbar at 263 to 323 °C) compare well with the published P–T values of other orogenic gold deposits in general, considerable pressure fluctuation characterize gold mineralization at Jonnagiri. Factors such as fluid phase separation and fluid–rock interaction, along with a decrease in f(O2), were collectively responsible for gold precipitation, from an initial low-saline metamorphogenic fluid. Comparison of the Jonnagiri ore fluid with other lode gold deposits in the Dharwar Craton and major granitoid-hosted gold deposits in Australia and Canada confirms that fluids of low saline aqueous–carbonic composition with metamorphic parentage played the most dominant role in the formation of the Archean lode gold systems.  相似文献   

19.
The Mary Valley manganese deposits exhibit mineralogy and textures characteristic of at least four parageneses. The deposits consist mainly of isolated occurrences of braunite, together with a number of lower and higher valency manganese oxides, and manganese silicates, in bedded radiolarian cherts and jaspers of Permian age. The parageneses are: (a) Braunite — quartz (primary), (b) Braunite — hausmannite — spessartine — tephroite — quartz (metamorphic). (c) Hydrated manganese silicates — barite — braunite — hausmannite (hydrothermal veins), (d) Tetravalent manganese oxides (pyrolusite, cryptomelane, manjiroite, nsutite) (supergene). The primary mineralisation is interpreted as the result of the geochemical separation of Mn from Fe in a submarine exhalative system, and the precipitation of Mn as oxide within bedded radiolarian oozes and submarine lavas. During diagenesis this hydrothermal manganese oxide reacted with silica to produce primary braunite. The later geological of evolution of this volcanogenicsedimentary deposit involved metamorphism, hydrothermal veining by remobilised manganese, and supergene enrichment.  相似文献   

20.
鄂尔多斯盆地乌审旗气田中二叠统下石盒子组盒8段下亚段中下部岩石为石英砂岩类砂岩,即“骆驼脖砂岩”,上部岩石为暗色粉砂质泥岩或碳质泥岩。“骆驼脖砂岩”广布于华北地台,在鄂尔多斯盆地呈“满盆砂”现象,是盆地的主要储层之一。以往学者多认为盒8段下亚段是河流相或三角洲相沉积。通过对众多取心井盒8段下亚段岩心的观察,结合对砂岩岩性、剖面结构、沉积构造、测井曲线特征及砂体空间展布规律的综合研究,提出了盒8段下亚段中下部是滩坝相沉积,上部是沼泽相或沼泽相为主夹小河道沉积。盒8段下亚段可发育一段或两段滩坝相石英砂岩类砂岩,其成分和结构成熟度较高,两段砂岩间夹若干米半深湖相的暗色粉砂质泥岩或沼泽相的碳质泥岩。发育＜10°的冲洗交错层理、互成180°相交的板状和楔状层系组,具丘状和洼状交错层理的风暴岩。自然伽马曲线呈箱形或带齿的箱形。众多厚度较大的砂岩组成的若干列近东西向展布的长条透镜体状砂体,大致平行于古岸线。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号