共查询到20条相似文献，搜索用时 15 毫秒
1.
J. Makris R. Egloff A.W.B. Jacob P. Mohr T. Murphy P. Ryan 《Earth and Planetary Science Letters》1988,89(3-4)
Two new seismic refraction/wide-angle reflection profiles demonstrate that the crust beneath the southern Porcupine Seabight, out to water depths in excess of 4000 m, is of continental type. They also reveal the rifted margin of the Porcupine basin on its eastern side. Crustal thickness under the Seabight, inclusive of sediments which are up to 6 km thick, decreases from 23 km in the east to about 10 km at a sharp continent-ocean transition in the west. 相似文献
2.
潮汕坳陷是中生界地层为主的沉积坳陷,是南海油气勘探突破的重要领域.LF35-1 1钻井证实了潮汕坳陷存在大套中生代海相地层,但未获油气发现,在钻至目标层前钻遇了侵入岩体,凸显了中生界钻前预测的重要性,本文对收集到的一条穿越潮汕坳陷长排列地震测线资料进行了多次波压制和AVO反演处理,获得了清晰的剖面反射特征,识别了两个中生界AVO异常带.研究区中生代速度普遍较高,但折射波速度计算表明这两个异常带中生界纵波速度低于背景速度,可能具有有利储集物性条件,因此作为AVO分析的选择区.但是AVO反演的纵波速度反射率剖面上显示为很大的数值,因此异常带成岩程度较高,可能不是油气成因的异常.地震偏移剖面也显示异常区受到切穿海底的高角度断裂影响,下部反射模糊杂乱,可能还有岩体侵入的影响,都不利于油气储集. 相似文献
3.
We have combined tensor radio magnetotelluric- (RMT, 15–250 kHz) and controlled source tensor magnetotelluric (CSTMT, 1–12 kHz) data for the mapping of aquifers in gravel formations lying in between crystalline bedrock and clay rich sediments in the Heby area some 40 km west of Uppsala in Sweden. The estimated transfer functions, the impedance tensor and the tipper vector generally satisfy 1D or 2D necessary conditions except for the lowest CSTMT frequencies where near field effects become more dominant.The data measured from 8 profiles were inverted with the Rebocc code of Siripunvaraporn and Egbert (2000) assuming plane wave conditions. This meant that only 12 frequencies in the range of 4–180 kHz could be used. The four lowest frequencies of CSTMT in the range of 1–2.8 kHz were excluded because of source effects. Data from all profiles were inverted with a starting model of 100 Ω-m and a relative error floor of 0.02 on apparent resistivity, corresponding to less than 1° on phase. Tipper vectors are generally small except when source effects become dominant in the lowest frequencies of CSTMT and were therefore not used for inversion. Comparing with models derived from vertical electrical soundings, refraction and reflection seismic data as well as ground truth from exploration wells assessed the reliability of the deep part of the models. Furthermore we carried out a non-linear resolution analysis to better quantify the depth extent of the aquifers.The inverted models from the Heby area show well the thickness variations of glacial deposits overlying crystalline bedrock. Generally, the upper 20 m of the models have resistivities below 40 Ω-m, taken to represent clay rich formations. Below the clay layer resistivities increase to about 40–400 Ω-m, interpreted to represent sand/gravel formations with a maximum thickness of about 40 m and a width of several hundred metres. This is a potential aquifer that extends in approximately N–S direction for some kilometres. 相似文献
4.
In this study, measurements of gravity were made to map and model the thickness of Quaternary deposits (sand and clay) overlying Ordovician limestones in a suburb of Ottawa (Orléans, Ontario). Because ground motion amplification is partly related to the thickness of unconsolidated deposits, this work helps refine the assessment of the earthquake damage potential of the area. It also helps the mapping of clay basins, which can locally exceed 100 m in thickness, where ground motion amplification can occur. Previous work, including well log data and seismic methods, have yielded a wealth of information on near-surface geology in Orléans, thereby providing the necessary constraints to test the applicability of gravity modeling in other locations where other methods cannot always be used. Some 104 gravity stations were occupied in an 8 × 12 km test area in the Orléans. Stations were accurately located with differential GPS that provided centimetric accuracy in elevation. Densities of the unconsolidated Quaternary deposits (Champlain Sea clay) determined on core samples and densities determined on limestone samples from outcrops were used to constrain models of the clay layer overlying the higher density bedrock formations (limestone). The gravity anomaly map delineates areas where clay basins attain > 100 m depth. Assuming a realistic density for the Champlain Sea clays (1.9-2.1 g/cm3), the thickness over the higher density bedrock formations (Ordovician carbonate rocks) was modeled and compared with well logs and two seismic reflection profiles. The models match quite well with the information determined from well logs and seismic methods. It was found that gravity and the thickness of unconsolidated deposits are correlated but the uncertainties in both data sets preclude the definition of a direct correlation between the two. We propose that gravity measurements at a local scale be used as an inexpensive means of mapping the thickness of unconsolidated deposits in low-density urban areas. To obtain meaningful results, three conditions must exist. Firstly, elevations of gravity stations must be measured accurately using differential GPS; secondly, that the regional gravity field must be well defined, and thirdly, that the local geology be simple enough to be realistically represented with a two-layer model. 相似文献
5.
浅层地震勘探资料地质解释过程中值得重视的问题 总被引：10，自引：5，他引：5
浅层地震勘探是第四系覆盖区隐伏断层活动性研究常用的手段,叠加剖面上反射波组的分叉、合并、弯曲、中断、尖灭等被用作判断断层存在的重要标志。松花江北的吕刚屯、巨宝屯浅层地震叠加剖面上,T0为下更新统砂砾石层等松散堆积和白垩系砂岩、泥岩的分界面,反射波组清晰。T0-1波组为砂砾石层和黏土层、或砂砾石层和粉细砂层的反射界面,反射波组振幅大,能量强。根据地震反射剖面和测线上的钻孔资料,认为阿什河断层错断了下更新统下段,滨州断层错断了上更新统下段。而通过建立高精度的钻探联合地质剖面、地层年代测试和地层对比,确认阿什河断层没有错断第四系,滨州断层错断了下更新统下段。最后,从第四系的岩性、厚度变化等解释了浅层地震叠加剖面上反射波组的中断、弯曲并非断层活动的结果,而是由第四纪地层相变引起的 相似文献
6.
Analysis of the refracted arrivals on a seismic reflection profile recorded along the wall of a tunnel at an iron mine near Thabazimbi, South Africa, shows variations in P-wave velocity in dolomite away from the de-stressed zone that vary between 4.4 and 7.2 km/s, though values greater than 5.8 km/s predominate along most of the profile. The seismic velocities at the tunnel wall, however, vary between 4.2 and 5.2 km/s. Time–depth terms are in the range from 0.1 to 0.9 ms, and yield thicknesses of the zone disturbed by the tunnel excavations of between 2 and 9 m. The very low seismic velocities away from the tunnel wall in two regions are associated with alcoves or ‘cubbies’ involving offsets in the wall of up to 10 m. The large variations in seismic velocity resolved over distances less than 15 m with signals of wavelength around 6–9 m are attributed to variations in the sizes and concentrations of fracture systems and cracks, and in the degree of groundwater saturation of the fracture systems. The results suggest that seismic velocity variations from reflection surveys may also assist modelling studies of the stress regime in deep mines, particularly if both P and S wave velocity variations can be determined. The seismic velocity variations inferred also show that application of refraction static corrections in the processing of ‘in-mine’ seismic reflection profiles is as important as in surface surveys, because of the higher frequencies of the seismic energy recorded in the deep mine environment. 相似文献
7.
8.
9.
R.B. Whitmarsh J.J. Langford J.S. Buckley R.J. Bailey D.J. Blundell 《Earth and Planetary Science Letters》1974,22(3):197-204
A 200 km long reversed seismic refraction line shot over Porcupine Ridge, a shoal area in the northeast Atlantic jutting out from the continental margin off Ireland, shows that the ridge has a crustal thickness of about 28 km. This result confirms the continental nature of this feature. The seismic data can be interpreted in two ways, one of which suggests the presence of a 6.7-km/sec refractor within the main crustal layer. 相似文献
10.
The structure of the crust and the crust-mantle boundary in the Vogtland/West Bohemian region have been a target of several
seismic measurements for the last 25 years, beginning with the steep-angle reflection seismic studies (DEKORP-4/KTB, MVE-90,
9HR), the refraction and wide-angle experiments (GRANU’95, CELEBRATION 2000, SUDETES 2003), and followed by passive seismic
studies (receiver functions, teleseismic tomography). The steep-angle reflection studies imaged a highly reflective lower
crust (4 to 6 km thick) with the Moho interpreted in a depth between 30 and 32 km and a thinner crust beneath the Eger Rift.
The refraction and wide-angle reflection seismic studies (CELEBRATION 2000) revealed strong wide-angle reflections in a depth
of 26–28 km interpreted as the top of the lower crust. Long coda of these reflections indicates strong reflectivity in the
lower crustal layer, a phenomenon frequently observed in the Caledonian and Variscan areas. The receiver function studies
detected one strong conversion from the base of the crust interpreted as the Moho discontinuity at a depth between 27 and
37 km (average at about 31 km). The discrepancies in the Moho depth determination could be partly attributed to different
background of the methods and their resolution, but could not fully explain them. So that new receivers function modelling
was provided. It revealed that, instead of a first-order Moho discontinuity, the observations can be explained with a lower
crustal layer or a crust-mantle transition zone with a maximum thickness of 5 km. The consequent synthetic ray-tracing modelling
resulted in the model with the top of the lower crust at 28 km, where highly reflective lower crustal layer can obscure the
Moho reflection at a depth of 32–33 km. 相似文献
11.
A. S. N. Murty D. M. Mall P. R. K. Murty P. R. Reddy 《Pure and Applied Geophysics》1998,152(2):247-266
—The seismic velocity structure of the upper and lower crusts along Hirapur-Mandla pro|fi|le was obtained by 2-D forward modeling of the refraction and wide-angle reflection data. Digitized record sections of the analog data were utilized for delineation of the crustal velocity model across the Vindhyan basin and the Narmada-Son lineament by travel-time modeling and qualitatively matching the amplitudes of synthetic seismograms with seismic record sections. An interface at a depth of 8 km has been traced from wide-angle reflection data of shot points 160 and 235 between Jabalpur and Mandla. The wide-angle reflection phase from crust-mantle boundary is very prominent in all the seismic record sections of shot points 0, 40, 80, 120 and 235. The Moho horizon along the entire study area was continuously traced, depicting an upwarp between Katangi and Jabalpur below the Narmada-Son lineament. The three faults inferred near Narsinghgarh, Katangi and Jabalpur divide the crust into four blocks. The number of faults and displacement patterns along them, depicted along the profile, indicates that block tectonics appear to be active in this region throughout the geological history. 相似文献
12.
13.
深反射地震剖面法为了获取深部结构特征常常采取大的偏移距采集数据.目前公开发表的相关资料中,鲜有利用深反射地震炮集数据获取近地表的结构特征.为此,本文通过正演测试了相关数据处理流程,即利用有限差分正演了起伏地表模型的大偏移距地震单炮弹性波场特征,通过共检波点域面波信号F-K频谱叠加构建新方法,从深反射地震数据集中提取了高品质的多阶面波频散曲线,再利用多阶面波联合反演获得了近地表的结构特征.在前述正演流程基础上,利用跨越班公湖—怒江缝合带的SinoProbe深反射地震剖面中的实际炮集数据,求取了基阶和一阶瑞利波频散曲线,联合反演后得到近地表横波速度结构.该结果与初至波走时反演获取的纵波速度结构具有较好的一致性,且在近地表的浅层分辨率较纵波速度结构特征更高,而更与已有地质认识相吻合.本文提供的相关数据处理流程表明利用深反射地震炮集数据,也能够获取近地表浅层的横波速度结构. 相似文献
14.
A two-dimensional finite element model for density dependent groundwater flow was calibrated to simulate sea water intrusion in Nauru Island in the Central Pacific Ocean. Nauru Island occupies an area of 22 km2 and supports a population of 8500. The island has been mined for its phosphate deposits and current reserves indicate that the mine has about eight years life remaining. The water supply of the island is about one third dependent on imported water which is also used as ballast on the phosphate ships. Imported water will not be available in the future, and a hydrogeological investigation shows that the island is underlain by a fresh water layer, less than 5 m thick. The freshwater layer overlies a thick transition zone of brackish water which in turn overlies sea water. Simulation of several management options shows that it is possible to substitute current importation of fresh water by careful extraction from the groundwater resources of the island. 相似文献
15.
ELIZABETH T. BUNCE 《Geophysical Prospecting》1969,17(1):28-35
Seismic refraction measurements were made in two areas of the Baltic Sea in June 1967. The refraction data were obtained in the course of the transmission measurements program of Operation MILOC BALTIC 67. Three profile pairs were obtained, two in the area south of Öland Island, Sweden, the third to the east, north of the peninsula of Hel, Poland. The water depths vary from 60 to 90 meters between the areas. The receiving positions for the two profiles south of Oland Island are only 46 km apart but the structures differ markedly. The northern section, only 500 m thick, shows a rather thin sedimentary cover above 350 m of 3.7 km/sec material that in turn overlies 5.6 - 5.9 km/sec velocity material. The southern section, almost 2 km thick, has an equivalent amount of low velocity material, and a layer about 1 km thick having velocity 4.8 km/sec that overlies 6.0 km/sec velocity material. The eastern profile shows high velocity material, 5.6 km/sec, at 2.5 km depth. Correlation of the layers determined by seismic refraction with nearby geology suggests that the structural change south of Öland Island may represent the boundary of the Sarmatian Shield in this region. 相似文献
16.
郯庐断裂带是中国东部规模最大的构造活动带,有着复杂的形成演化历史,对中国东部的区域构造、岩浆活动、矿产资源的形成和分布以及现代地震活动都有重要控制作用.2010年在郯庐断裂带中南段的江苏宿迁市附近,采用深地震反射探测方法对郯庐断裂带及其两侧地块的岩石圈结构进行了解剖.结果表明,该区莫霍面和岩石圈底界均向西倾,其中,地壳厚度约为31~36km,岩石圈厚度约为75~86km,且岩石圈厚度在郯庐断裂带下方出现突变.郯庐断裂带在剖面上表现为由多条主干断裂组成的花状构造,其内部发育有断陷盆地和挤压褶皱,具有伸展、挤压和走滑并存的构造形迹,暗示郯庐断裂带的形成和演化经历了多期复杂的构造活动.这一断裂带错断了近地表沉积层,向下切割莫霍面和岩石圈地幔,属岩石圈尺度的深大断裂构造系统.软流圈高温高压热物质沿断裂带的上涌、岩浆底侵或热侵蚀作用造成岩石圈出现拉张伸展和岩石圈减薄,并可能使岩石圈组构及其物质成分发生改变.本项研究结果不但可进一步加深对郯庐断裂带深、浅部结构的认识,而且还可为分析研究华北克拉通东部的深部过程和浅部构造响应提供资料约束. 相似文献
17.
《Journal of Applied Geophysics》2001,46(1):31-44
During two Antarctic summers (1996–1997 and 1997–1998), five seismic refraction and two reflection profiles were acquired on the Johnsons Glacier (Livingston Island, Antarctica) in order to obtain information about the structure of the ice, characteristics of the ice-bed contact and basement topography. An innovative technique has been used for the acquisition of reflection data to optimise the field survey schedule. Different shallow seismic sources were used during each field season: Seismic Impulse Source System (SISSY) for the first field survey and low-energy explosives (pyrotechnic noisemakers) during the second one. A comparison between these two shallow seismic sources has been performed, showing that the use of the explosives is a better seismic source in this ice environment. This is one of the first studies where this type of source has been used. The analysis of seismic data corresponding to one of the reflection profiles (L3) allows us to delineate sectors with different glacier structure (accumulation and ablation zones) without using glaciological data. Moreover, vertical discontinuities were detected by the presence of back-scattered energy and the abrupt change in frequency content of first arrivals shown in shot records. After the raw data analysis, standard processing led us to a clear seismic image of the underlying bed topography, which can be correlated with the ice flow velocity anomalies. The information obtained from seismic data on the internal structure of the glacier, location of fracture zones and the topography of the ice-bed interface constrains the glacial dynamics of Johnsons Glacier. 相似文献
18.
Identifying the sources of crustal reflections is essential for deriving more geological information from deep crustal reflection profiles. Theoretical and model studies help place constraints on the role of compositional variation in producing deep crustal reflections. Analysis of laboratory-derived velocities and densities of rock types typical for the continental crust indicates that reflection coefficients are generally small, but significantly, 17% of the possible reflection coefficients have magnitudes between 0.1 and 0.2. Comparison between reflection coefficients derived from well logs and reflections observed in associated seismic profiles indicates that constructive interference associated with geological layering is at least as important as the magnitude of the reflection coefficients for producing detectable reflections. Constructive interference can increase reflection amplitude by two to three times but is limited to a relatively narrow range of layer thickness. For a typical 10–40 Hz seismic wavelet and typical crustal velocities of about 6 km/s, constructive interference occurs for layer thickness ranging between about 35 and 80 m. Layers thinner than 35 m interfere destructively. If reflections result from compositional variation, seismic models of hypothetical and observed geologic relations provide analogs for interpreting complex reflection patterns observed in deep crustal reflection profiles. Such models show reflection patterns similar to those observed in the reflection profiles. The models indicate that the reflections could originate in the complexly deformed and intruded terranes that are common in the crystalline crust and it may not be necessary to appeal to unobserved phenomena such as special lamellae or fluid-filled fractures to explain the reflections. 相似文献
19.
A. Caserta S. Martino F. Bozzano A. Govoni F. Marra 《Bulletin of Earthquake Engineering》2012,10(4):1133-1162
The presence of peats and high compressibility inorganic clays within alluvial fills on the left-side tributaries of the Tiber River, close to Rome’s historic center in Italy, is well documented in literature. Nevertheless, few literature data exist until now on the dynamic properties of these deposits by undisturbed bore-hole samples. The Galba test-site was set up to characterise dynamic properties of the alluvial deposits by using lab-tests as well as to derive velocity profiles by seismic noise measurements. These were performed in the Giustiniano Imperatore area located in the Grottaperfetta valley, about 2?km south of Rome’s historic centre. The alluvial deposits filled a paleovalley excavated in the bedrock during the Würm glacial (18–20 ky). The stratigraphic setting of the alluvial body was reconstructed along three geological cross-sections by means of the available logs; seven lithotecnical horizons can be distinguished within the alluvial body, some tens of meters thick, based on both log-stratigraphic data and in-site geotechnical tests. These horizons include peaty layers (T) and high compressibility inorganic clays (AGI), which characterise the alluvial deposits in the Grottaperfetta valley. They do not have direct correlation with the alluvial horizons which constitute the alluvial body of the main Tiber valley in Rome’s historical centre. These alluvial horizons which are distinguished and characterised at the Galba test-site can be regarded as typical of other lateral valleys of the Tiber River in Southern Rome. They are characterised by the presence of similar high compressibility clayey deposits as well as peaty layers up to some meters thick. Undisturbed samples were also obtained at the Galba test-site for dynamic testing via resonant column and cyclic torsional shear tests. In order to attribute dynamic properties to the alluvial body at the Grottaperfetta valley, an extrapolation process was performed based on a detailed engineering-geology model of the alluvial body which was reconstructed along three transversal geological sections of the valley using bore-hole data. Three subsoil profiles, considered representative of the geological setting along the three reconstructed transversal cross sections, were analysed by seismic noise measurements performed specifically to derive S-waves velocity profiles. The results obtained show a very low velocity (<180 m/s) for the layers T and AGI. 1D modelling of seismic shaking was performed by the code Shake91, in order to evaluate the influence of the low-velocity strata on maximum shear strains induced within the alluvial deposits under the maximum expected seismic action. The results of the numerical modelling indicate that the AGI and the T layers play a key role in: (i) concentrating the maximum shear strain along the subsoil profiles, even though the volumetric threshold is never exceeded; (ii) increasing the maximum shear strain along the subsoil profiles; (iii) causing the resonance frequency of the alluvial fill to assume an almost constant value (about 1Hz) which is quite similar to that measured in the main Tiber River valley, despite a significant change in thickness of the alluvial body along the Grottaperfetta valley. 相似文献
20.
通过在上海地区开展深、浅地震反射、地震宽角反射/折射、高分辨地震折射和大地电磁测深等联合剖面探测, 获得了该地区近地表至Moho面的精细速度结构、电性结构和深浅构造关系.结果表明, 该地区地壳可划分为上、中、下三个组成部分.其中,上地壳厚为12～14 km,波速为57～59 km/s;中地壳厚度约为10 km,波速为59～62 km/s;下地壳厚为10～11 km, 波速为62～63 km/s,Moho面深度约为32 km.剖面浅部地质构造复杂,共解释出12条特征明显的断裂.其中,除3条断裂错断结晶基底（G界面）并向下延伸至上地壳底界面外,其他断裂均在深度3～5 km以上终止或收敛于G界面之上.此外,仅在剖面西侧基底下部约13～15 km埋深处发现一厚度在2 km左右的壳内高导层.所以,在综合各方面资料后分析认为,在剖面经过地区不存在发生大地震的深部构造条件,近地表所存在的活动断层是未来产生对该区有影响地震的震源区. 相似文献