首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 390 毫秒
1.
Any errors in digital elevation models (DEMs) will introduce errors directly in gravity anomalies and geoid models when used in interpolating Bouguer gravity anomalies. Errors are also propagated into the geoid model by the topographic and downward continuation (DWC) corrections in the application of Stokes’s formula. The effects of these errors are assessed by the evaluation of the absolute accuracy of nine independent DEMs for the Iran region. It is shown that the improvement in using the high-resolution Shuttle Radar Topography Mission (SRTM) data versus previously available DEMs in gridding of gravity anomalies, terrain corrections and DWC effects for the geoid model are significant. Based on the Iranian GPS/levelling network data, we estimate the absolute vertical accuracy of the SRTM in Iran to be 6.5 m, which is much better than the estimated global accuracy of the SRTM (say 16 m). Hence, this DEM has a comparable accuracy to a current photogrammetric high-resolution DEM of Iran under development. We also found very large differences between the GLOBE and SRTM models on the range of −750 to 550 m. This difference causes an error in the range of −160 to 140 mGal in interpolating surface gravity anomalies and −60 to 60 mGal in simple Bouguer anomaly correction terms. In the view of geoid heights, we found large differences between the use of GLOBE and SRTM DEMs, in the range of −1.1 to 1 m for the study area. The terrain correction of the geoid model at selected GPS/levelling points only differs by 3 cm for these two DEMs.  相似文献   

2.
A set of2261 5°×5° mean anomalies were used alone and with satellite determined harmonic coefficients of the Smithsonian' Institution to determine the geopotential expansion to various degrees. The basic adjustment was carried out by comparing a terrestrial anomaly to an anomaly determined from an assumed set of coefficients. The (14, 14) solution was found to agree within ±3 m of a detailed geoid in the United States computed using1°×1° anomalies for an inner area and satellite determined anomalies in an outer area. Additional comparisons were made to the input anomaly field to consider the accuracy of various harmonic coefficient solutions. A by-product of this investigation was a new γE=978.0463 gals in the Potsdam system or978.0326 gals in an absolute system if −13.7 mgals is taken as the Potsdam correction. Combining this value of γE withf=1/298.25, KM=3.9860122·10 22 cm 3 /sec 2 , the consistent equatorial radius was found to be6378143 m.  相似文献   

3.
The formulas for the determination of the coefficients of the spherical harmonic expansion of the disturbing potential of the earth are defined for data given on a sphere. In order to determine the spherical harmonic coefficients, the gravity anomalies have to be analytically downward continued from the earth's surface to a sphere—at least to the ellipsoid. The goal of this paper is to continue the gravity anomalies from the earth's surface downward to the ellipsoid using recent elevation models. The basic method for the downward continuation is the gradient solution (theg 1 term). The terrain correction has also been computed because of the role it can play as a correction term when calculating harmonic coefficients from surface gravity data. Theg 1 term and the terrain correction were expanded into the spherical harmonics up to180 th order. The corrections (theg 1 term and the terrain correction) have the order of about 2% of theRMS value of degree variance of the disturbing potential per degree. The influences of theg 1 term and the terrain correction on the geoid take the order of 1 meter (RMS value of corrections of the geoid undulation) and on the deflections of the vertical is of the order 0.1″ (RMS value of correction of the deflections of the vertical).  相似文献   

4.
The application of Stokes’s formula to determine the geoid height requires that topographic and atmospheric masses be mathematically removed prior to Stokes integration. This corresponds to the applications of the direct topographic and atmospheric effects. For a proper geoid determination, the external masses must then be restored, yielding the indirect effects. Assuming an ellipsoidal layering of the atmosphere with 15% increase in its density towards the poles, the direct atmospheric effect on the geoid height is estimated to be −5.51 m plus a second-degree zonal harmonic term with an amplitude of 1.1 cm. The indirect effect is +5.50 m and the total geoid correction thus varies between −1.2 cm at the equator to 1.9 cm at the poles. Finally, the correction needed to the atmospheric effect if Stokes’s formula is used in a spherical approximation, rather than an ellipsoidal approximation, of the Earth varies between 0.3 cm and 4.0 cm at the equator and pole, respectively.  相似文献   

5.
 The Somigliana–Pizzetti gravity field (the International gravity formula), namely the gravity field of the level ellipsoid (the International Reference Ellipsoid), is derived to the sub-nanoGal accuracy level in order to fulfil the demands of modern gravimetry (absolute gravimeters, super conducting gravimeters, atomic gravimeters). Equations (53), (54) and (59) summarise Somigliana–Pizzetti gravity Γ(φ,u) as a function of Jacobi spheroidal latitude φ and height u to the order ?(10−10 Gal), and Γ(B,H) as a function of Gauss (surface normal) ellipsoidal latitude B and height H to the order ?(10−10 Gal) as determined by GPS (`global problem solver'). Within the test area of the state of Baden-Württemberg, Somigliana–Pizzetti gravity disturbances of an average of 25.452 mGal were produced. Computer programs for an operational application of the new international gravity formula with (L,B,H) or (λ,φ,u) coordinate inputs to a sub-nanoGal level of accuracy are available on the Internet. Received: 23 June 2000 / Accepted: 2 January 2001  相似文献   

6.
The well-known International Association of Geodesy (IAG) approach to the atmospheric geoid correction in connection with Stokes' integral formula leads to a very significant bias, of the order of 3.2 m, if Stokes' integral is truncated to a limited region around the computation point. The derived truncation error can be used to correct old results. For future applications a new strategy is recommended, where the total atmospheric geoid correction is estimated as the sum of the direct and indirect effects. This strategy implies computational gains as it avoids the correction of direct effect for each gravity observation, and it does not suffer from the truncation bias mentioned above. It can also easily be used to add the atmospheric correction to old geoid estimates, where this correction was omitted. In contrast to the terrain correction, it is shown that the atmospheric geoid correction is mainly of order H of terrain elevation, while the term of order H 2 is within a few millimetres. Received: 20 May 1998 / Accepted: 19 April 1999  相似文献   

7.
An inverse Poisson integral technique has been used to determine a gravity field on the geoid which, when continued by analytic free space methods to the topographic surface, agrees with the observed field. The computation is performed in three stages, each stage refining the previous solution using data at progressively increasing resolution (1o×1o, 5′×5′, 5/8′×5/8′) from a decreasing area of integration. Reduction corrections are computed at 5/8′×5/8′ granularity by differencing the geoidal and surface values, smoothed by low-pass filtering and sub-sampled at 5′ intervals. This paper discusses 1o×1o averages of the reduction corrections thus obtained for 172 1o×1o squares in western North America. The 1o×1o mean reduction corrections are predominantly positive, varying from −3 to +15mgal, with values in excess of 5mgal for 26 squares. Their mean andrms values are +2.4 and 3.6mgal respectively and they correlate well with the mean terrain corrections as predicted byPellinen in 1962. The mean andrms contributions from the three stages of computation are: 1o×1o stage +0.15 and 0.7mgal; 5′×5′ stage +1.0 and 1.6mgal; and 5/8′×5/8′ stage +1.3 and 1.8mgal. These results reflect a tendency for the contributions to become larger and more systematically positive as the wavelengths involved become shorter. The results are discussed in terms of two mechanisms; the first is a tendency for the absolute values of both positive and negative anomalies to become larger when continued downwards and, the second, a non-linear rectification, due to the correlation between gravity anomaly and topographic height, which results in the values continued to a level surface being systematically more positive than those on the topography.  相似文献   

8.
The method of analytical downward continuation has been used for solving Molodensky’s problem. This method can also be used to reduce the surface free air anomaly to the ellipsoid for the determination of the coefficients of the spherical harmonic expansion of the geopotential. In the reduction of airborne or satellite gradiometry data, if the sea level is chosen as reference surface, we will encounter the problem of the analytical downward continuation of the disturbing potential into the earth, too. The goal of this paper is to find out the topographic effect of solving Stoke’sboundary value problem (determination of the geoid) by using the method of analytical downward continuation. It is shown that the disturbing potential obtained by using the analytical downward continuation is different from the true disturbing potential on the sea level mostly by a −2πGρh 2/p. This correction is important and it is very easy to compute and add to the final results. A terrain effect (effect of the topography from the Bouguer plate) is found to be much smaller than the correction of the Bouguer plate and can be neglected in most cases. It is also shown that the geoid determined by using the Helmert’s second condensation (including the indirect effect) and using the analytical downward continuation procedure (including the topographic effect) are identical. They are different procedures and may be used in different environments, e.g., the analytical downward continuation procedure is also more convenient for processing the aerial gravity gradient data. A numerical test was completed in a rough mountain area, 35°<ϕ<38°, 240°<λ<243°. A digital height model in 30″×30″ point value was used. The test indicated that the terrain effect in the test area has theRMS value ±0.2−0.3 cm for geoid. The topographic effect on the deflections of the vertical is around1 arc second.  相似文献   

9.
The topographic potential and the direct topographic effect on the geoid are presented as surface integrals, and the direct gravity effect is derived as a rigorous surface integral on the unit sphere. By Taylor-expanding the integrals at sea level with respect to topographic elevation (H) the power series of the effects is derived to arbitrary orders. This study is primarily limited to terms of order H 2. The limitations of the various effects in the frequently used planar approximations are demonstrated. In contrast, it is shown that the spherical approximation to power H 2 leads to a combined topographic effect on the geoid (direct plus indirect effect) proportional to H˜2 (where terms of degrees 0 and 1 are missing) of the order of several metres, while the combined topographic effect on the height anomaly vanishes, implying that current frequent efforts to determine the direct effect to this order are not needed. The last result is in total agreement with Bjerhammar's method in physical geodesy. It is shown that the most frequently applied remove–restore technique of topographic masses in the application of Stokes' formula suffers from significant errors both in the terrain correction C (representing the sum of the direct topographic effect on gravity anomaly and the effect of continuing the anomaly to sea level) and in the term t (mainly representing the indirect effect on the geoidal or quasi-geoidal height). Received: 18 August 1998 / Accepted: 4 October 1999  相似文献   

10.
Knudsen 《Journal of Geodesy》1987,61(2):145-160
The estimation of a local empirical covariance function from a set of observations was done in the Faeroe Islands region. Gravity and adjusted Seasat altimeter data relative to theGPM2 spherical harmonic approximation were selected holding one value in celles of1/8°×1/4° covering the area. In order to center the observations they were transformed into a locally best fitting reference system having a semimajor axis1.8 m smaller than the one ofGRS80. The variance of the data then was273 mgal 2 and0.12 m 2 respectively. In the calculations both the space domain method and the frequency domain method were used. Using the space domain method the auto-covariances for gravity anomalies and geoid heights and the cross-covariances between the quantities were estimated. Furthermore an empirical error estimate was derived. Using the frequency domain method the auto-covariances of gridded gravity anomalies was estimated. The gridding procedure was found to have a considerable smoothing effect, but a deconvolution made the results of the two methods to agree. The local covariance function model was represented by a Tscherning/Rapp degree-variance model,A/((i−1)(i−2)(i+24))(R B /R E )2i+2, and the error degree-variances related to the potential coefficient setGPM2. This covariance function was adjusted to fit the empirical values using an iterative least squares inversion procedure adjusting the factor A, the depth to the Bjerhammar sphere(R E −R B ), and a scale factor associated with the error degree-variances. Three different combinations of the empirical covariance values were used. The scale factor was not well determined from the gravity anomaly covariance values, and the depth to the Bjerhammar sphere was not well determined from geoid height covariance values only. A combination of the two types of auto-covariance values resulted in a well determined model.  相似文献   

11.
Terrestrial free-air gravity anomalies form a most essential data source in the framework of gravity field determination. Gravity anomalies depend on the datums of the gravity, vertical, and horizontal networks as well as on the definition of a normal gravity field; thus gravity anomaly data are affected in a systematic way by inconsistencies of the local datums with respect to a global datum, by the use of a simplified free-air reduction procedure and of different kinds of height system. These systematic errors in free-air gravity anomaly data cause systematic effects in gravity field related quantities like e.g. absolute and relative geoidal heights or height anomalies calculated from gravity anomaly data. In detail it is shown that the effects of horizontal datum inconsistencies have been underestimated in the past. The corresponding systematic errors in gravity anomalies are maximum in mid-latitudes and can be as large as the errors induced by gravity and vertical datum and height system inconsistencies. As an example the situation in Australia is evaluated in more detail: The deviations between the national Australian horizontal datum and a global datum produce a systematic error in the free-air gravity anomalies of about −0.10 mgal which value is nearly constant over the continent  相似文献   

12.
Observations of gravity and atmospheric pressure variations during the total solar eclipse of 11 July 1991 in Mexico City are presented. An LCR-G402 gravimeter equipped with a feedback system and a digital data acquisition system scanned gravity and pressure every second around the totality. On the pressure record an oscillation, starting at the totality, with a peak to peak amplitude of 0.5 hPa and a periodicity of 40 to 50 min, can clearly be seen. This oscillation results from the thermal shock wave produced by the Moon shadow travelling at supersonic speed. At the 0.1 μGal (1 nm · s−2) level all gravity perturbations are explained by the atmospheric pressure effect. Received: 10 February 1995 / Accepted: 7 June 1996  相似文献   

13.
A 29-year time-series of four-times-daily atmospheric effective angular momentum (EAM) estimates is used to study the atmospheric influence on nutation. The most important atmospheric contributions are found for the prograde annual (77 μas), retrograde annual (53 as), prograde semiannual (45 as), and for the constant offset of the pole (δψsinɛ0=−86 as, δɛ=77 as). Among them only the prograde semiannual component is driven mostly by the wind term of the EAM function, while in all other cases the pressure term is dominant. These are nonnegligible quantities which should be taken into account in the new theory of nutation. Comparison with the VLBI corrections to the IAU 1980 nutation model taking into account the ocean tide contribution yields good agreement for the prograde annual and semiannual nutations. We also investigated time variability of the atmospheric contribution to the nutation amplitudes by performing the sliding-window least-squares analysis of both the atmospheric excitation and VLBI nutation data. Almost all detected variations of atmospheric origin can be attributed to the pressure term, the biggest being the in-phase annual prograde component (about 30 as) and the retrograde one (as much as 100200 as). These variations, if physical, limit the precision of classical modeling of nutation to the level of 0.1 mas. Comparison with the VLBI data shows significant correlation for the retrograde annual nutation after 1989, while for the prograde annual term there is a high correlation in shape but the size of the atmospherically driven variations is about three times less than deduced from the VLBI data. This discrepancy in size can be attributed either to inaccuracy of the theoretical transfer function or the frequency-dependent ocean response to the pressure variations. Our comparison also yields a considerably better agreement with the VLBI nutation data when using the EAM function without the IB correction for ocean response, which indicates that this correction is not adequate for nearly diurnal variations. Received: 10 September 1997 / Accepted: 5 March 1998  相似文献   

14.
One of the products derived from the gravity field and steady-state ocean circulation explorer (GOCE) observations are the gravity gradients. These gravity gradients are provided in the gradiometer reference frame (GRF) and are calibrated in-flight using satellite shaking and star sensor data. To use these gravity gradients for application in Earth scienes and gravity field analysis, additional preprocessing needs to be done, including corrections for temporal gravity field signals to isolate the static gravity field part, screening for outliers, calibration by comparison with existing external gravity field information and error assessment. The temporal gravity gradient corrections consist of tidal and nontidal corrections. These are all generally below the gravity gradient error level, which is predicted to show a 1/f behaviour for low frequencies. In the outlier detection, the 1/f error is compensated for by subtracting a local median from the data, while the data error is assessed using the median absolute deviation. The local median acts as a high-pass filter and it is robust as is the median absolute deviation. Three different methods have been implemented for the calibration of the gravity gradients. All three methods use a high-pass filter to compensate for the 1/f gravity gradient error. The baseline method uses state-of-the-art global gravity field models and the most accurate results are obtained if star sensor misalignments are estimated along with the calibration parameters. A second calibration method uses GOCE GPS data to estimate a low-degree gravity field model as well as gravity gradient scale factors. Both methods allow to estimate gravity gradient scale factors down to the 10−3 level. The third calibration method uses high accurate terrestrial gravity data in selected regions to validate the gravity gradient scale factors, focussing on the measurement band. Gravity gradient scale factors may be estimated down to the 10−2 level with this method.  相似文献   

15.
 This paper suggests that potential coefficient models of the Earth's gravitational potential be used to calculate height anomalies which are then reduced to geoid undulations where such quantities are needed for orthometric height determination and vertical datum definition through a potential coefficient realization of the geoid. The process of the conversion of the height anomaly into a geoid undulation is represented by a height anomaly gradient term and the usual N–ζ term that is dependent on elevation and the Bouguer anomaly. Using a degree 360 expansion of 30′ elevations and the OSU91A potential coefficient model, a degree 360 representation of the correction terms was computed. The magnitude of N–ζ reached –3.4 m in the Himalaya Mountains with smaller, but still significant, magnitudes in other mountainous regions. Received: 6 May 1996; Accepted: 30 October 1996  相似文献   

16.
 The definition of the mean Helmert anomaly is reviewed and the theoretically correct procedure for computing this quantity on the Earth's surface and on the Helmert co-geoid is suggested. This includes a discussion of the role of the direct topographical and atmospherical effects, primary and secondary indirect topographical and atmospherical effects, ellipsoidal corrections to the gravity anomaly, its downward continuation and other effects. For the rigorous derivations it was found necessary to treat the gravity anomaly systematically as a point function, defined by means of the fundamental gravimetric equation. It is this treatment that allows one to formulate the corrections necessary for computing the `one-centimetre geoid'. Compared to the standard treatment, it is shown that a `correction for the quasigeoid-to-geoid separation', amounting to about 3 cm for our area of interest, has to be considered. It is also shown that the `secondary indirect effect' has to be evaluated at the topography rather than at the geoid level. This results in another difference of the order of several centimetres in the area of interest. An approach is then proposed for determining the mean Helmert anomalies from gravity data observed on the Earth's surface. This approach is based on the widely-held belief that complete Bouguer anomalies are generally fairly smooth and thus particularly useful for interpolation, approximation and averaging. Numerical results from the Canadian Rocky Mountains for all the corrections as well as the downward continuation are shown. Received: 9 March 1998 / Accepted: 16 November 1998  相似文献   

17.
The method of Bjerhammar is studied in the continuous case for a sphere. By varying the kernel function, different types of unknowns (u*) are obtained at the internal sphere (the Bjerhammar sphere). It is shown that a necessary condition for the existence of u* is that the degree variances (σ n 2 ) of the observations are of an order less than n−2. According to Kaula’s rule this condition is not satisfied for the earth’s gravity anomaly field (σ n 2 =n−1) but well for the geopotential (σ n 2 =n−3).  相似文献   

18.
Assuming that the gravity anomaly and disturbing potential are given on a reference ellipsoid, the result of Sjöberg (1988, Bull Geod 62:93–101) is applied to derive the potential coefficients on the bounding sphere of the ellipsoid to order e 2 (i.e. the square of the eccentricity of the ellipsoid). By adding the potential coefficients and continuing the potential downward to the reference ellipsoid, the spherical Stokes formula and its ellipsoidal correction are obtained. The correction is presented in terms of an integral over the unit sphere with the spherical approximation of geoidal height as the argument and only three well-known kernel functions, namely those of Stokes, Vening-Meinesz and the inverse Stokes, lending the correction to practical computations. Finally, the ellipsoidal correction is presented also in terms of spherical harmonic functions. The frequently applied and sometimes questioned approximation of the constant m, a convenient abbreviation in normal gravity field representations, by e 2/2, as introduced by Moritz, is also discussed. It is concluded that this approximation does not significantly affect the ellipsoidal corrections to potential coefficients and Stokes formula. However, whether this standard approach to correct the gravity anomaly agrees with the pure ellipsoidal solution to Stokes formula is still an open question.  相似文献   

19.
This study deals with the external type of topographic–isostatic potential and gravity anomaly and its vertical derivatives, derived from the Airy/Heiskanen model for isostatic compensation. From the first and the second radial derivatives of the gravity anomaly the effect on the geoid is estimated for the downward continuation of gravity to sea level in the application of Stokes' formula. The major and regional effect is shown to be of order H 3 of the topography, and it is estimated to be negligible at sea level and modest for most mountains, but of the order of several metres for the highest and most extended mountain belts. Another, global, effect is of order H but much less significant Received: 3 October 1997 / Accepted: 30 June 1998  相似文献   

20.
This paper investigates the normal-orthometric correction used in the definition of the Australian Height Datum, and also computes and evaluates normal and Helmert orthometric corrections for the Australian National Levelling Network (ANLN). Testing these corrections in Australia is important to establish which height system is most appropriate for any new Australian vertical datum. An approximate approach to assigning gravity values to ANLN benchmarks (BMs) is used, where the EGM2008-modelled gravity field is used to ‘re-construct’ observed gravity at the BMs. Network loop closures (for first- and second-order levelling) indicate reduced misclosures for all height corrections considered, particularly in the mountainous regions of south eastern Australia. Differences between Helmert orthometric and normal-orthometric heights reach 44 cm in the Australian Alps, and differences between Helmert orthometric and normal heights are about 26 cm in the same region. Normal-orthometric heights differ from normal heights by up to 18 cm in mountainous regions >2,000 m. This indicates that the quasigeoid is not compatible with normal-orthometric heights in Australia.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号