The reaction garnet+clinopyroxene+quartz =2 orthopyroxene+anorthite: A potential geobarometer for granulites     

P. Paria  A. Bhattacharya  S. K. Sen 《Contributions to Mineralogy and Petrology》1988,99(1):126-133

A mineralogic geobarometer based on the reaction garnet+clinopyroxene+quartz=2 orthopyroxene+anorthite is proposed. The geobarometric formulations for the Fe- and Mg- end member equilibria are $$\begin{gathered} P_{({\text{Fe}})} {\text{ }}({\text{bars}}){\text{ = 32}}{\text{.097 }}T{\text{ }} - {\text{ 26385 }} - {\text{ 22}}{\text{.79 (}}T - 848 - T1{\text{n(}}T/848{\text{))}} \hfill \\ {\text{ }} - (3.655 + 0.0138T){\text{ }}\left( {\frac{{{\text{(}}T - 848{\text{)}}^{\text{2}} }}{T}} \right) \hfill \\ {\text{ }} - {\text{(3}}{\text{.123) }}T1{\text{n }}\frac{{(a_{a{\text{n}}}^{{\text{Plag}}} )(a_{{\text{fs}}}^{{\text{P}}\ddot u{\text{x}}} )^2 }}{{(a_{{\text{alm}}}^{{\text{Gt}}} )(a_{{\text{hed}}}^{{\text{Opx}}} )}} \hfill \\ P_{({\text{Mg}})} {\text{ (bars) = 9}}{\text{.270 }}T + 4006 - 0.9305{\text{ }}(T - 848 - T1{\text{n (}}T/848{\text{)}}) \hfill \\ {\text{ }} - (1.1963{\text{ }} - {\text{ }}6.0128{\text{ x 10}}^{ - {\text{3}}} T)\left( {\frac{{(T - 848)^2 }}{T}} \right) \hfill \\ {\text{ }} - 3.489{\text{ }}T1{\text{n }}\frac{{(a_{an}^{{\text{Plag}}} ){\text{ }}(a_{{\text{ens}}}^{{\text{Opx}}} )}}{{{\text{(}}a_{{\text{pyr}}}^{{\text{Gt}}} {\text{) (}}a_{{\text{diop}}}^{{\text{Cpx}}} {\text{)}}}}. \hfill \\ \end{gathered}$$ The end member thermodynamic data have been taken from the data base of Helgeson et al. (1978) and Saxena and Erikson (1983). The activities of pyroxene components and anorthite in plagioclase have been modelled after Wood and Banno (1973) and Newton (1983) respectively. The activities of pyrope and almandine are calculated from the binary interaction parameters for garnet solid solutions proposed by Saxena and Erikson (1983). Pressures computed from these equations for fifty sets of published mineral data from several granulite areas are comparable with those obtained from dependable geobarometers. The pressure values determined from the Fe-end member equilibrium appear to be more reasonable than those from the Mg-end member reaction. It is likely that the difference in pressures computed from the Fe- and Mg-end members, ΔP ^*, have been caused by non-ideal mixing in the phases, especially in garnets.  相似文献   

The reversed alumina contents of orthopyroxene in equilibrium with spinel and forsterite in the system MgO-Al2O3-SiO2     

T. Gasparik  R. C. Newton 《Contributions to Mineralogy and Petrology》1984,85(2):186-196

Equilibrium alumina contents of orthopyroxene coexisting with spinel and forsterite in the system MgO-Al₂O₃-SiO₂ have been reversed at 15 different P-T conditions, in the range 1,030–1,600° C and 10–28 kbar. The present data and three reversals of Danckwerth and Newton (1978) have been modeled assuming an ideal pyroxene solid solution with components Mg₂Si₂O₆ (En) and MgAl₂SiO₆ (MgTs), to yield the following equilibrium condition (J, bar, K): $$\begin{gathered} RT{\text{ln(}}X_{{\text{MgTs}}} {\text{/}}X_{{\text{En}}} {\text{) + 29,190}} - {\text{13}}{\text{.42 }}T + 0.18{\text{ }}T + 0.18{\text{ }}T^{1.5} \hfill \\ + \int\limits_1^P {\Delta V_{T,P}^{\text{0}} dP = 0,} \hfill \\ \end{gathered} $$ where $$\begin{gathered} + \int\limits_1^P {\Delta V_{T,P}^{\text{0}} dP} \hfill \\ = [0.013 + 3.34 \times 10^{ - 5} (T - 298) - 6.6 \times 10^{ - 7} P]P. \hfill \\ \end{gathered} $$ The data of Perkins et al. (1981) for the equilibrium of orthopyroxene with pyrope have been similarly fitted with the result: $$\begin{gathered} - RT{\text{ln(}}X_{{\text{MgTs}}} \cdot X_{{\text{En}}} {\text{) + 5,510}} - 88.91{\text{ }}T + 19{\text{ }}T^{1.2} \hfill \\ + \int\limits_1^P {\Delta V_{T,P}^{\text{0}} dP = 0,} \hfill \\ \end{gathered} $$ where $$\begin{gathered} + \int\limits_1^P {\Delta V_{T,P}^{\text{0}} dP} \hfill \\ = [ - 0.832 - 8.78{\text{ }} \times {\text{ 10}}^{ - {\text{5}}} (T - 298) + 16.6{\text{ }} \times {\text{ 10}}^{ - 7} P]{\text{ }}P. \hfill \\ \end{gathered} $$ The new parameters are in excellent agreement with measured thermochemical data and give the following properties of the Mg-Tschermak endmember: $$H_{f,970}^0 = - 4.77{\text{ kJ/mol, }}S_{298}^0 = 129.44{\text{ J/mol}} \cdot {\text{K,}}$$ and $$V_{298,1}^0 = 58.88{\text{ cm}}^{\text{3}} .$$ The assemblage orthopyroxene+spinel+olivine can be used as a geothermometer for spinel lherzolites, subject to a choice of thermodynamic mixing models for multicomponent orthopyroxene and spinel. An ideal two-site mixing model for pyroxene and Sack's (1982) expressions for spinel activities provide, with the present experimental calibration, a geothermometer which yields temperatures of 800° C to 1,350° C for various alpine peridotites and 850° C to 1,130° C for various volcanic inclusions of upper mantle origin.  相似文献   

Garnet-clinopyroxene geothermometer     

S. K. Saxena 《Contributions to Mineralogy and Petrology》1979,70(3):229-235

A garnet-clinopyroxene geothermometer based on the available experimental data on compositions of coexisting phases in the system MgO-FeO-MnO-Al₂O₃-Na₂O-SiO₂ is as follows: $$T({\text{}}K) = \frac{{8288 + 0.0276 P {\text{(bar)}} + Q1 - Q2}}{{1.987 \ln K_{\text{D}} + 2.4083}}$$ where P is pressure, and Q1, Q2, and K _D are given by the following equations $$Q1 = 2,710{\text{(}}X_{{\text{Fe}}} - X_{{\text{Mg}}} {\text{)}} + 3,150{\text{ }}X_{{\text{Ca}}} + 2,600{\text{ }}X_{{\text{Mn}}} $$ (mole fractions in garnet) $$\begin{gathered}Q2 = - 6,594[X_{{\text{Fe}}} {\text{(}}X_{{\text{Fe}}} - 2X_{{\text{Mg}}} {\text{)]}} \hfill \\{\text{ }} - 12762{\text{ [}}X_{{\text{Fe}}} - X_{{\text{Mg}}} (1 - X_{{\text{Fe}}} {\text{)]}} \hfill \\{\text{ }} - 11,281[X_{{\text{Ca}}} (1 - X_{{\text{Al}}} ) - 2X_{{\text{Mg}}} 2X_{{\text{Ca}}} ] \hfill \\{\text{ + 6137[}}X_{{\text{Ca}}} (2X_{{\text{Mg}}} + X_{{\text{Al}}} )] \hfill \\{\text{ + 35,791[}}X_{{\text{Al}}} (1 - 2X_{{\text{Mg}}} )] \hfill \\{\text{ + 25,409[(}}X_{{\text{Ca}}} )^2 ] - 55,137[X_{{\text{Ca}}} (X_{{\text{Mg}}} - X_{{\text{Fe}}} )] \hfill \\{\text{ }} - 11,338[X_{{\text{Al}}} (X_{{\text{Fe}}} - X_{{\text{Mg}}} )] \hfill \\\end{gathered} $$ [mole fractions in clinopyroxene Mg = MgSiO₃, Fe = FeSiO₃, Ca = CaSiO₃, Al = (Al₂O₃-Na₂O)] K _D = (Fe/Mg) in garnet/(Fe/Mg) in clinopyroxene. Mn and Cr in clinopyroxene, when present in small concentrations are added to Fe and Al respectively. Fe is total Fe²⁺+Fe³⁺.  相似文献   

Energetics of hydration of cordierite and water barometry in cordierite-granulites     

A. Bhattacharya  S. K. Sen 《Contributions to Mineralogy and Petrology》1985,89(4):370-378

The Gibbs free energy and volume changes attendant upon hydration of cordierites in the system magnesian cordierite-water have been extracted from the published high pressure experimental data at \(P_{{\text{H}}_{\text{2}} {\text{O}}} \) =P _total, assuming an ideal one site model for H₂O in cordierite. Incorporating the dependence of ΔG and ΔV on temperature, which was found to be linear within the experimental conditions of 500°–1,000°C and 1–10,000 bars, the relation between the water content of cordierite and P, T and \(f_{{\text{H}}_{\text{2}} {\text{O}}} \) has been formulated as $$\begin{gathered} X_{{\text{H}}_{\text{2}} {\text{O}}}^{{\text{crd}}} = \hfill \\ \frac{{f_{{\text{H}}_{\text{2}} {\text{O}}}^{{\text{P, T}}} }}{{\left[ {{\text{exp}}\frac{1}{{RT}}\left\{ {64,775 - 32.26T + G_{{\text{H}}_{\text{2}} {\text{O}}}^{{\text{1, }}T} - P\left( {9 \times 10^{ - 4} T - 0.5142} \right)} \right\}} \right] + f_{{\text{H}}_{\text{2}} {\text{O}}}^{{\text{P, T}}} }} \hfill \\ \end{gathered} $$ The equation can be used to compute H₂O in cordierites at \(P_{{\text{H}}_{\text{2}} {\text{O}}} \) <1. Our results at different P, T and partial pressure of water, assuming ideal mixing of H₂O and CO₂ in the vapour phase, are in very good agreement with the experimental data of Johannes and Schreyer (1977, 1981). Applying the formulation to determine \(X_{{\text{H}}_{\text{2}} {\text{O}}}^{{\text{crd}}} \) in the garnet-cordierite-sillimanite-plagioclase-quartz granulites of Finnish Lapland as a test case, good agreement with the gravimetrically determined water contents of cordierite was obtained. Pressure estimates, from a thermodynamic modelling of the Fe-cordierite — almandine — sillimanite — quartz equilibrium at \(P_{{\text{H}}_{\text{2}} {\text{O}}} = 0\) and \(P_{{\text{H}}_{\text{2}} {\text{O}}} \) =P_total, for assemblages from South India, Scottish Caledonides, Daly Bay and Hara Lake areas are compatible with those derived from the garnetplagioclase-sillimanite-quartz geobarometer.  相似文献   

Experimental calibration of Forsterite–Anorthite–Ca-Tschermak–Enstatite (FACE) geobarometer for mantle peridotites     

P.?FumagalliEmail authorView author&#;s OrcID profile  G.?Borghini  E.?Rampone  S.?Poli 《Contributions to Mineralogy and Petrology》2017,172(6):38

  相似文献   

Non-ideal mixing in the phlogopite-annite binary: constraints from experimental data on Mg−Fe partitioning and a reformulation of the biotite-garnet geothermometer     

A. Bhattacharya  L. Mohanty  A. Maji  S. K. Sen  M. Raith 《Contributions to Mineralogy and Petrology》1992,111(1):87-93

The existing experimental data [Ferry and Spear 1978; Perchuk and Lavrent'eva 1983] on Mg?Fe partitioning between garnet and biotite are disparate. The underlying assumption of ideal Mg?Fe exchange between the minerals has been examined on the basis of recently available thermochemical data. Using the updated mixing parameters for the pyrope-almandine asymmetric regular solution as inputs [Ganguly and Saxena 1984; Hackler and Wood 1984], thermodynamic analysis points to non-ideal mixing in the phlogopite-annite binary in the temperature range of 550°C–950°C. The non-ideality can be approximated by a temperature-independent, one constant Margules parameter. The retrieved values for enthalpy of mixing for Mg?Fe biotites and the standard state enthalpy and entropy changes of the exchange reaction were combined with existing thermochemical data on grossular-pyrope and grossular-almandine binaries to obtain geothermometric expressions for Mg?Fe fractionation between biotite and garnet. [T in K] $$\begin{gathered} {\text{T(HW) = [20286 + 0}}{\text{.0193P - \{ 2080(X}}_{{\text{Mg}}}^{{\text{Gt}}} {\text{)}}^{\text{2}} {\text{ - 6350(X}}_{{\text{Fe}}}^{{\text{Gt}}} {\text{)}}^{\text{2}} \hfill \\ {\text{ - 13807(X}}_{{\text{Ca}}}^{{\text{Gt}}} {\text{)(1 - X}}_{{\text{Mn}}}^{{\text{Gt}}} {\text{) + 8540(X}}_{{\text{Fe}}}^{{\text{Gt}}} {\text{)(X}}_{{\text{Mg}}}^{{\text{Gt}}} {\text{)(1 - X}}_{{\text{Mn}}}^{{\text{Gt}}} {\text{)}} \hfill \\ {\text{ + 4215(X}}_{{\text{Ca}}}^{{\text{Gt}}} {\text{)(X}}_{{\text{Mg}}}^{{\text{Gt}}} {\text{ - X}}_{{\text{Fe}}}^{{\text{Gt}}} {\text{)\} + 4441}}{{{\text{(2X}}_{{\text{Mg}}}^{{\text{Bt}}} {\text{ - 1)]}}} \mathord{\left/ {\vphantom {{{\text{(2X}}_{{\text{Mg}}}^{{\text{Bt}}} {\text{ - 1)]}}} {{\text{[13}}{\text{.138}}}}} \right. \kern-\nulldelimiterspace} {{\text{[13}}{\text{.138}}}} \hfill \\ {\text{ + 8}}{\text{.3143 InK}}_{\text{D}} {\text{ + 6}}{\text{.276(X}}_{{\text{Ca}}}^{{\text{Gt}}} ){\text{(1 - X}}_{{\text{Mn}}}^{{\text{Gt}}} )] \hfill \\ {\text{T(GS) = [13538 + 0}}{\text{.0193P - \{ 837(X}}_{{\text{Mg}}}^{{\text{Gt}}} )^{\text{2}} {\text{ - 10460(X}}_{{\text{Fe}}}^{{\text{Gt}}} )^2 \hfill \\ {\text{ - 13807(X}}_{{\text{Ca}}}^{{\text{Gt}}} )(1{\text{ - X}}_{{\text{Mn}}}^{{\text{Gt}}} {\text{) + 19246(X}}_{{\text{Fe}}}^{{\text{Gt}}} ){\text{(X}}_{{\text{Mg}}}^{{\text{Gt}}} ){\text{(1 - X}}_{{\text{Mn}}}^{{\text{Gt}}} ) \hfill \\ {\text{ }}{{{\text{ + 5649(X}}_{{\text{Ca}}}^{{\text{Gt}}} ){\text{(X}}_{{\text{Mg}}}^{{\text{Gt}}} {\text{ - X}}_{{\text{Fe}}}^{{\text{Gt}}} ){\text{\} + 7972(2X}}_{{\text{Mg}}}^{{\text{Bt}}} {\text{ - 1)]}}} \mathord{\left/ {\vphantom {{{\text{ + 5649(X}}_{{\text{Ca}}}^{{\text{Gt}}} ){\text{(X}}_{{\text{Mg}}}^{{\text{Gt}}} {\text{ - X}}_{{\text{Fe}}}^{{\text{Gt}}} ){\text{\} + 7972(2X}}_{{\text{Mg}}}^{{\text{Bt}}} {\text{ - 1)]}}} {{\text{[6}}{\text{.778}}}}} \right. \kern-\nulldelimiterspace} {{\text{[6}}{\text{.778}}}} \hfill \\ {\text{ + 8}}{\text{.3143InK}}_{\text{D}} {\text{ + 6}}{\text{.276(X}}_{{\text{Ca}}}^{{\text{Gt}}} )(1{\text{ - X}}_{{\text{Mn}}}^{{\text{Gt}}} )] \hfill \\ \end{gathered} $$ The reformulated geothermometer is an improvement over existing biotite-garnet geothermometers because it reconciles the experimental data sets on Fe?Mg partitioning between the two phases and is based on updated activity-composition relationship in Fe?Mg?Ca garnet solid solutions.  相似文献   

Enstatite-diopside solvus and geothermometry     

S. K. Saxena  C. E. Nehru 《Contributions to Mineralogy and Petrology》1975,49(3):259-267

The enstatite-diopside solvus presents certain interesting thermodynamic and crystal-structural problems. The solvus may be considered as parts of two solvi one with the ortho-structure and the other with clino-structure. By assuming the standard free energy change for the two reactions (MgMgSi₂O₆)opx ? (MgMgSi₂O₆)cpx and (CaMgSi₂O₆) opx ? (CaMgSi₂O₆) cpx as 500 and 1 000 to 3 000 cal/mol respectively, it is possible to calculate the regular solution parameter W for orthopyroxene and clinopyroxene. These W's essentially refer to mixing on M2 sites. The expression for the equilibrium constant by assuming ideal mixing for Fe-Mg, Fe-Ca and non-ideal mixing for Ca-Mg on binary M1 and ternary M2 sites is given by 1 $$K_a = \frac{{X_{{\text{Mg - cpx}}}^{{\text{M1}}} X_{{\text{Mg - cpx}}}^{{\text{M2}}} \exp \left[ {\frac{{W_{{\text{cpx}}} }}{{RT}}\left\{ {X_{{\text{Ca - cpx}}}^{{\text{M2}}} \left( {X_{{\text{Ca - cpx}}}^{{\text{M2}}} + X_{{\text{Fe - cpx}}}^{{\text{M2}}} } \right)} \right\}} \right]}}{{X_{{\text{Mg - cpx}}}^{{\text{M1}}} X_{{\text{Mg - opx}}}^{{\text{M2}}} \exp \left[ {\frac{{W_{{\text{cpx}}} }}{{RT}}\left\{ {X_{{\text{Ca - opx}}}^{{\text{M2}}} \left( {X_{{\text{Ca - opx}}}^{{\text{M2}}} + X_{{\text{Fe - opx}}}^{{\text{M2}}} } \right)} \right\}} \right]}}$$ where X's are site occupancies, R is 1.987 and T is temperature in ^oK. Temperature of pyroxene crystallization may be estimated by substituting for T in the above equation until the equation ?RT In K _a=500 is satisfied. The shortcomings of this method are the incomplete standard free energy data on the end member components and the absence of site occupancy data in pyroxenes at high temperatures. The assumed free energy data do, however, show the possible extent of inaccuracy in temperature estimates resulting from the neglect of Mg-Ca non ideality.  相似文献   

An almandine garnet isograd in the Rogers Pass area,British Columbia: The nature of the reaction and an estimation of the physical conditions during its formation     

J. W. Jones 《Contributions to Mineralogy and Petrology》1972,37(4):291-306

In the Rogers Pass area of British Columbia the almandine garnet isograd results from a reaction of the form: 5.31 ferroan-dolomite+8.75 paragonite+4.80 pyrrhotite+3.57 albite+16.83 quartz+1.97 O₂=1.00 garnet+16.44 andesine+1.53 chlorite+2.40 S₂+1.90 H₂O+10.62 CO₂. The coefficients of this reaction are quite sensitive to the Mn content of ferroan-dolomite.Experimental data applied to mineral compositions present at the isograd, permits calculation of two intersecting P, T equilibrium curves. P=29088–39.583 T is obtained for the sub-system paragonite-margarite (solid-solution), plagioclase, quartz, ferroan-dolomite, and P=28.247 T–14126 is obtained for the sub-system epidote, quartz, garnet, plagioclase. These equations yield P=3898 bars and T=638° K (365° C). These values are consistent with the FeS content of sphalerite in the assemblage pyrite, pyrrhotite, sphalerite and with other estimates for the area.At these values of P and T the composition of the fluid phase in equilibrium with graphite in the system C-O-H-S during the formation of garnet is estimated as: bars, bars, bars, bars, bars, bars, bars, bars, , bars, bars.  相似文献   

Optical absorption and mössbauer spectra of purple and green yoderite,a kyanite-related mineral     

R. M. Abu-Eid  K. Langer  F. Seifert 《Physics and Chemistry of Minerals》1978,3(3):271-289

Mössbauer and polarized optical absorption spectra of the kyanite-related mineral yoderite were recorded. Mössbauer spectra of the purple (PY) and green yoderite (GY) from Mautia Hill, Tanzania, show that the bulk of the iron is Fe³⁺ in both varieties, with Fe²⁺/(Fe²⁺+Fe³⁺) ratios near 0.05. Combining this result with new microprobe data for PY and with literature data for GY gives the crystallochemical formulae: $$\begin{gathered} ({\text{Mg}}_{{\text{1}}{\text{.95}}} {\text{Fe}}_{{\text{0}}{\text{.02}}}^{{\text{2 + }}} {\text{Mn}}_{{\text{0}}{\text{.01}}}^{{\text{2 + }}} {\text{Fe}}_{{\text{0}}{\text{.34}}}^{{\text{3 + }}} {\text{Mn}}_{{\text{0}}{\text{.07}}}^{{\text{3 + }}} {\text{Ti}}_{{\text{0}}{\text{.01}}} {\text{Al}}_{{\text{3}}{\text{.57}}} )_{5.97}^{[5,6]} \hfill \\ {\text{Al}}_{{\text{2}}{\text{.00}}}^{{\text{[5]}}} [({\text{Si}}_{{\text{3}}{\text{.98}}} {\text{P}}_{{\text{0}}{\text{.03}}} ){\text{O}}_{{\text{18}}{\text{.02}}} ({\text{OH)}}_{{\text{1}}{\text{.98}}} ] \hfill \\ \end{gathered}$$ and PY and $$\begin{gathered} ({\text{Mg}}_{{\text{1}}{\text{.98}}} {\text{Fe}}_{{\text{0}}{\text{.02}}}^{{\text{2 + }}} {\text{Mn}}_{{\text{< 0}}{\text{.001}}}^{{\text{2 + }}} {\text{Fe}}_{{\text{0}}{\text{.45}}}^{{\text{3 + }}} {\text{Ti}}_{{\text{0}}{\text{.01}}} {\text{Al}}_{{\text{3}}{\text{.56}}} )_{6.02}^{[5,6]} \hfill \\ {\text{Al}}_{{\text{2}}{\text{.00}}}^{{\text{[5]}}} [({\text{Si}}_{{\text{3}}{\text{.91}}} {\text{O}}_{{\text{17}}{\text{.73}}} {\text{(OH)}}_{{\text{2}}{\text{.27}}} ] \hfill \\ \end{gathered}$$ for GY. The Mössbauer spectra at room temperature contain one main doublet with isomer shifts and quadrupole splittings of 0.36 (PY), 0.38 (GY) and 1.00 (PY), 0.92 (GY) mm s^?1, respectively. These values correspond to Fe³⁺ in six or five-fold coordination. The doublet components have anomalously large half widths indicating either accomodation of Fe³⁺ in more than one position (e.g., octahedraA1 and five coordinatedA2) or the yet unresolved superstructure. Besides strong absorption in the ultraviolet (UV) starting from about 25,000 cm^?1, the polarized optical absorption spectra are dominated by strong bands around 16,500 and 21,000 cm^?1 (PY) and a medium strong band at around 13,800 cm^?1 (GY). Position and polarization of these bands, in combination with the UV absorption, explain the colour and pleochroism of the two varieties. The bands in question are assigned to homonuclear metal-to-metal charge transfer transitions: Mn²⁺(A1) Mn³⁺(A1′) ? Mn³⁺(A1) Mn²⁺(A1′) and Mn²⁺(A1) Mn³⁺(A2 ? Mn³⁺(A1) Mn²⁺(A2) in PY and Fe²⁺(A1) Fe³⁺(A1′) ? Fe³⁺(A1) Fe²⁺(A1′) in GY. The evidence for homonuclear Mn²⁺ Mn³⁺ charge transfer (CTF) is not quite clear and needs further study. Heteronuclear FeTi CTF does not contribute to the spectra. In PY, additional weak bands were resolved at energies around 17,700, 18,700, 21,000, and 21,900 cm^?1 and assigned to Mn³⁺ in two positions. Weak bands around 10,000 cm^?1 in both varieties are assigned to Fe²⁺ spin-alloweddd-transitions. Very weak and sharp bands, around 15,400, 16,400, 21,300, 22,100, 23,800, and 25,000 cm^?1 are identified in GY and assigned to Fe³⁺ spin-forbiddendd-transitions.  相似文献   

Some geobarometers involving cordierite in the FeO-Al2O3-SiO2(±H2O) system: refinements,thermodynamic calibration,and applicability in granulite facies rocks     

A. Bhattacharya 《Contributions to Mineralogy and Petrology》1986,94(3):387-394

Five geobarometers involving cordierite have been formulated for quantitative pressure sensing in high grade metapelites. The relevant reactions in the FeO-Al₂O₃-SiO₂ (±H₂O) system are based on the assemblages (A) cordierite-garnet-sillimanite-quartz, (B) cordierite-spinel-quartz, (C) cordierite-garnet-spinel-sillimanite, (D) cordierite-garnet-orthopyroxene-quartz and (E) cordierite-orthopyroxene-sillimanite-quartz. Application of the barometric formulations to a large number of granulite grade rocks indicates that the cordierite-garnet-sillimanite-quartz equilibrium is widely applicable and registers pressures which are in good agreement with the “consensus” pressure estimates. The dispersion in the computed P values, expressed as one standard deviation, is within ±1.2 kbar. The geobarometers (B) and (C) also yield pressures which are reasonable and compare well with those computed from equilibrium (A). The estimated pressures from (D) and (E), both involving orthopyroxene, are at variance with these estimates. It has been argued that the discrepancy in pressures obtained from these geobarometers stems from an inadequate knowledge of activity-composition relations and/or errors in input thermodynamic data of aluminous orthopyroxene. The convergence of pressure values estimated from the barometric formulations, especially (A), (B) and (C), implies that the present formulations are more dependable than the existing formulations and are also capable of setting limits on P values in response to varying $$\begin{gathered} {\text{1/2Fe}}_{\text{2}} {\text{Al}}_{\text{4}} {\text{Si}}_{\text{5}} {\text{O}}_{{\text{18}}} \hfill \\ {\text{ = 1/3Fe}}_{\text{3}} {\text{Al}}_{\text{2}} {\text{Si}}_{\text{3}} {\text{O}}_{{\text{12}}} {\text{ + 2/3Al}}_{\text{2}} {\text{SiO}}_{\text{5}} {\text{ + 5/6SiO}}_{\text{2}} {\text{. (A)}} \hfill \\ {\text{1/2Fe}}_{\text{2}} {\text{Al}}_{\text{4}} {\text{Si}}_{\text{5}} {\text{O}}_{{\text{18}}} {\text{ = FeAl}}_{\text{2}} {\text{O}}_{\text{4}} {\text{ + 5/2SiO}}_{\text{2}} {\text{. (B)}} \hfill \\ {\text{Fe}}_{\text{2}} {\text{Al}}_{\text{4}} {\text{Si}}_{\text{5}} {\text{O}}_{{\text{18}}} {\text{ + FeAl}}_{\text{2}} {\text{O}}_{\text{4}} \hfill \\ = {\text{Fe}}_{\text{3}} {\text{Al}}_{\text{2}} {\text{Si}}_{\text{3}} {\text{O}}_{{\text{12}}} {\text{ + 2Al}}_{\text{2}} {\text{SiO}}_{\text{5}} {\text{. (C)}} \hfill \\ {\text{1/2Fe}}_{\text{2}} {\text{Al}}_{\text{4}} {\text{Si}}_{\text{5}} {\text{O}}_{{\text{18}}} {\text{ + Fe}}_{\text{2}} {\text{Si}}_{\text{2}} {\text{O}}_{\text{6}} \hfill \\ = {\text{Fe}}_{\text{3}} {\text{Al}}_{\text{2}} {\text{Si}}_{\text{3}} {\text{O}}_{{\text{12}}} {\text{ + 3/2SiO}}_{\text{2}} .{\text{ (D)}} \hfill \\ {\text{1/2Fe}}_{\text{2}} {\text{Al}}{}_{\text{4}}{\text{Si}}_{\text{5}} {\text{O}}_{{\text{18}}} \hfill \\ = 1/2{\text{Fe}}_{\text{2}} {\text{Si}}_{\text{2}} {\text{O}}_{\text{6}} {\text{ + Al}}_{\text{2}} {\text{SiO}}_{\text{5}} {\text{ + 1/2SiO}}_{\text{2}} .{\text{ (E)}} \hfill \\ \end{gathered}$$ . The present communication addresses the calibration, applicability and reliability of these barometers with reference to granulite facies metapelites.  相似文献   

The high-pressure stability of chlorite and other hydrates in subduction mélanges: experiments in the system Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>–MgO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript>–H<Subscript>2</Subscript>O     

Patrizia?FumagalliEmail author  Stefano?Poli  Johannes?Fischer  Marco?Merlini  Mauro?Gemmi 《Contributions to Mineralogy and Petrology》2014,167(2):979

The solubility of chromium in chlorite as a function of pressure, temperature, and bulk composition was investigated in the system Cr₂O₃–MgO–Al₂O₃–SiO₂–H₂O, and its effect on phase relations evaluated. Three different compositions with X _Cr = Cr/(Cr + Al) = 0.075, 0.25, and 0.5 respectively, were investigated at 1.5–6.5 GPa, 650–900 °C. Cr-chlorite only occurs in the bulk composition with X _Cr = 0.075; otherwise, spinel and garnet are the major aluminous phases. In the experiments, Cr-chlorite coexists with enstatite up to 3.5 GPa, 800–850 °C, and with forsterite, pyrope, and spinel at higher pressure. At P > 5 GPa other hydrates occur: a Cr-bearing phase-HAPY (Mg_2.2Al_1.5Cr_0.1Si_1.1O₆(OH)₂) is stable in assemblage with pyrope, forsterite, and spinel; Mg-sursassite coexists at 6.0 GPa, 650 °C with forsterite and spinel and a new Cr-bearing phase, named 11.5 Å phase (Mg:Al:Si = 6.3:1.2:2.4) after the first diffraction peak observed in high-resolution X-ray diffraction pattern. Cr affects the stability of chlorite by shifting its breakdown reactions toward higher temperature, but Cr solubility at high pressure is reduced compared with the solubility observed in low-pressure occurrences in hydrothermal environments. Chromium partitions generally according to \(X_{\text{Cr}}^{\text{spinel}}\) ? \(X_{\text{Cr}}^{\text{opx}}\) > \(X_{\text{Cr}}^{\text{chlorite}}\) ≥ \(X_{\text{Cr}}^{\text{HAPY}}\) > \(X_{\text{Cr}}^{\text{garnet}}\). At 5 GPa, 750 °C (bulk with X _Cr = 0.075) equilibrium values are \(X_{\text{Cr}}^{\text{spinel}}\) = 0.27, \(X_{\text{Cr}}^{\text{chlorite}}\) = 0.08, \(X_{\text{Cr}}^{\text{garnet}}\) = 0.05; at 5.4 GPa, 720 °C \(X_{\text{Cr}}^{\text{spinel}}\) = 0.33, \(X_{\text{Cr}}^{\text{HAPY}}\) = 0.06, and \(X_{\text{Cr}}^{\text{garnet}}\) = 0.04; and at 3.5 GPa, 850 °C \(X_{\text{Cr}}^{\text{opx}}\) = 0.12 and \(X_{\text{Cr}}^{\text{chlorite}}\) = 0.07. Results on Cr–Al partitioning between spinel and garnet suggest that at low temperature the spinel- to garnet-peridotite transition has a negative slope of 0.5 GPa/100 °C. The formation of phase-HAPY, in assemblage with garnet and spinel, at pressures above chlorite breakdown, provides a viable mechanism to promote H₂O transport in metasomatized ultramafic mélanges of subduction channels.  相似文献   

The combined effect of F and H2O on interdiffusion between peralkaline dacitic and rhyolitic melts     

Don R. Baker  Hélène Bossányi 《Contributions to Mineralogy and Petrology》1994,117(2):203-214

The effective binary diffusion coefficient (EBDC) of silicon has been measured during the interdiffusion of peralkaline, fluorine-bearing (1.3 wt% F), hydrous (3.3 and 6 wt% H₂O), dacitic and rhyolitic melts at 1.0 GPa and temperatures between 1100°C and 1400°C. From Boltzmann-Matano analysis of diffusion profiles the diffusivity of silicon at 68 wt% SiO₂ can be described by the following Arrhenius equations (with standard errors): $$\begin{gathered} {\text{with 1}}{\text{.3 wt\% F and 3}}{\text{.3\% H}}_{\text{2}} {\text{O:}} \hfill \\ {\text{D}}_{{\text{Si}}} = \begin{array}{*{20}c} { + {\text{3}}{\text{.59}}} \\ {{\text{3}}{\text{.66}} \times {\text{10}}^{ - {\text{9}}} } \\ { - {\text{1}}{\text{.86}}} \\ \end{array} {\text{exp}}\left( {{{ - {\text{86}}{\text{.1}} \pm {\text{8}}{\text{.9}}} \mathord{\left/ {\vphantom {{ - {\text{86}}{\text{.1}} \pm {\text{8}}{\text{.9}}} {{\text{RT}}}}} \right. \kern-\nulldelimiterspace} {{\text{RT}}}}} \right) \hfill \\ {\text{with 1}}{\text{.3 wt\% F and 6}}{\text{.0\% H}}_{\text{2}} {\text{O:}} \hfill \\ {\text{D}}_{{\text{Si}}} = \begin{array}{*{20}c} { + {\text{3}}{\text{.59}}} \\ {{\text{3}}{\text{.51}} \times {\text{10}}^{ - {\text{8}}} } \\ { - {\text{1}}{\text{.77}}} \\ \end{array} {\text{exp}}\left( {{{ - {\text{109}}{\text{.5}} \pm {\text{8}}{\text{.9}}} \mathord{\left/ {\vphantom {{ - {\text{109}}{\text{.5}} \pm {\text{8}}{\text{.9}}} {{\text{RT}}}}} \right. \kern-\nulldelimiterspace} {{\text{RT}}}}} \right) \hfill \\ \end{gathered} $$ where D is in m²s^?1 and activation energies are in kJ/mol. Diffusivities measured at 64 and 72 wt% SiO₂ are only slightly different from those at 68 wt% SiO₂ and frequently all measurements are within error of each other. Silicon, aluminum, iron, magnesium, and calcium EBDCs were also calculated from diffusion profiles by error function inversion techniques assuming constant diffusivity. With one exception, silicon EBDCs calculated by error function techniques are within error of Boltzmann-Matano EBDCs. Average diffusivities of Fe, Mg, and Ca were within a factor of 2.5 of silicon diffusivities whereas Al diffusivities were approximately half those of silicon. Alkalies diffused much more rapidly than silicon and non-alkalies, however their diffusivities were not quantitatively determined. Low activation energies for silicon EBDCs result in rapid diffusion at magmatic temperatures. Assuming that water and fluorine exert similar effects on melt viscosity at high temperatures, the viscosity can be calculated and used in the Eyring equation used to determine diffusivities, typically to within a factor of three of those measured in this study. This correlation between viscosity and diffusivity can be inverted to calculate viscosities of fluorine- and water-bearing granitic melts at magmatic temperatures; these viscosities are orders of magnitude below those of hydrous granitic melts and result in more rapid and effective separation of granitic magmas from partially molten source rocks. Comparison of Arrhenius parameters for diffusion measured in this study with Arrhenius parameters determined for diffusion in similar compositions at the same pressure demonstrates simple relationships between Arrhenius parameters, activation energy-E_a, kJ/mol, pre-exponential factor-D_o, m²s^?1, and the volatile, X=F or OH^?, to oxygen, O, ratio of the melt {(X/X+O)}: $$\begin{gathered} {\text{E}}a = - {\text{1533\{ }}{{\text{X}} \mathord{\left/ {\vphantom {{\text{X}} {\left( {{\text{X}} + {\text{O}}} \right)}}} \right. \kern-\nulldelimiterspace} {\left( {{\text{X}} + {\text{O}}} \right)}}{\text{\} }} + {\text{213}}{\text{.3}} \hfill \\ {\text{D}}_{\text{O}} = {\text{2}}{\text{.13}} \times {\text{10}}^{ - {\text{6}}} {\text{exp}}\left[ { - {\text{6}}{\text{.5\{ }}{{\text{X}} \mathord{\left/ {\vphantom {{\text{X}} {\left( {{\text{X}} + {\text{O}}} \right)}}} \right. \kern-\nulldelimiterspace} {\left( {{\text{X}} + {\text{O}}} \right)}}{\text{\} }}} \right] \hfill \\ \end{gathered} $$ These relationships can be used to estimate diffusion in various melts of dacitic to rhyolitic composition containing both fluorine and water. Calculations for the contamination of rhyolitic melts by dacitic enclaves at 800°C and 700°C provide evidence for the virtual inevitability of diffusive contamination in hydrous and fluorine-bearing magmas if they undergo magma mixing of any form.  相似文献   

Chemistry of Neutral and Alkaline Waters with Low Al<Superscript>3+</Superscript> Activity Against Hydroxyaluminosilicate HAS<Subscript>B</Subscript> Solubility. The Evidence from Ground and Surface Waters of the Sudetes Mts. (SW Poland)     

Dariusz Dobrzyński 《Aquatic Geochemistry》2007,13(3):197-210

A wide set of aqueous chemistry data (574 water analyses) from natural environments has been used to testify and validate of the solubility of synthetic hydroxyaluminosilicate (HAS_B)_, Al₂Si₂O₅(OH)₄. The ground and surface waters represent regolith and/or fissure aquifers in various (magmatic, sedimentary and metamorphic) bedrocks in the Sudetes Mts. (SW Poland). The solubility of HAS_B in natural waters was calculated using the method proposed by Schneider et al. (Polyhedron 23:3185–3191, 2004). Results confirm usefulness and validity of this method. The HAS_B solubility obtained from the field data (logK_sp = −44.7 ± 0.58) is lower than it was estimated (logK_sp = −40.6 ± 0.15) experimentally (Schneider et al. Polyhedron 23:3185–3191, 2004). In the waters studied the equilibrium with HAS_B is maintained at pH above 6.7 and at [Al³⁺] ≤ 10⁻¹⁰. Silicon activity (log[H₄SiO₄]) ranges between −4.2 and −3.4. Due to the calculation method used, the K_sp mentioned above cannot be considered as a classical solubility constant. However, it can be used in the interpretation of aluminium solubility in natural waters. The HAS_B has solubility lower than amorphous Al(OH)₃, and higher than proto-imogolite. From water samples that are in equilibrium with respect to HAS_B, the solubility product described by the reaction, is calculated to be logK_sp = 14.0 (±0.7) at 7°C.  相似文献   

Serpentinites and their tectonic signature along the Northwest Zagros Thrust Zone, Kurdistan Region, Iraq     

Yousif Osman Mohammad 《Arabian Journal of Geosciences》2011,4(1-2):69-83

Two types of serpentinized peridotites are distinguished within the Northwest Zagros Thrust Zone (NW-ZTZ) in Kurdistan region of Iraq. One is found as lower members of ophiolite sequences, such as the Mawat and Penjwin ophiolites of the upper Cretaceous age. The other is represented by intraformational isolated serpentinite bodies in Betwat, Qaladeza, and Qalander areas within the Walash–Naopurdan volcano-sedimentary unit of the Paleocene to Eocene paleo-arc tectonic setting. Serpentinites within the NW-ZTZ consist mainly of lizardite and chrysotile, with subordinate amounts of syn-serpentinization magnetite, carbonates, chromium chlorite, tremolite, and talc as secondary minerals, and olivine, clinopyroxene, and chromian spinel as primary minerals. Minor antigorite is also found in the sheared serpentinites often found in ophiolite sequences. Petrological and geochemical studies of serpentinites from the NW-ZTZ show that, of the original protoliths of serpentinites, those associated with ophiolites are residual depleted harzburgite and dunite. The $ {\text{Cr}}\# \left( {{{ = {\text{ Cr}}} \mathord{\left/ {\vphantom {{ = {\text{ Cr}}} {\left( {{\text{Cr}} + {\text{Al}}} \right){\text{ atomic ratio}}}}} \right. \kern-0em} {\left( {{\text{Cr}} + {\text{Al}}} \right){\text{ atomic ratio}}}}} \right) $ of chromian spinel is more than 0.6, and the forsterite content of olivine is 91–92. On the other hand, the original protolith of isolated serpentinite bodies is less depleted harzburgite or depleted lherzolite, which has spinel with Cr# less than 0.6 and olivine with 90–91 forsterite contents. Whole rock chemistry of major, trace, and rare earth elements shows that the serpentinites of ophiolite sequences are depleted in CaO, Al₂O₃, and SiO₂, Sr, and Zr, and are enriched in MgO, Ni, and Cr, in comparison with the isolated serpentinites. Cr# of the disseminated unaltered chromian spinels indicates that the serpentinites of both types had been originated from the supra-subduction zone tectonic setting; the serpentinites of ophiolite sequences obducted and thrusted over the continental margin during the obduction of the Tethyth oceanic crust onto the Arabian continental margin during the upper Cretaceous period. Isolated serpentinite bodies represent serpentinized forearc mantle wedge peridotites emplaced by diapiric upwelling into non-accretionary forearc tectonic settings during the Paleocene to Eocene age.  相似文献