共查询到20条相似文献，搜索用时 15 毫秒
1.
填筑和开挖边坡的稳定性分析 总被引：1，自引：0，他引：1
在有限元应力应变分析的基础上,采用以剪应力定义的安全系数和模式搜索的方法确定边坡的安全系数及最危险滑动面。在平面应变条件下,对土层均质的填筑和开挖边坡的稳定性进行了较为全面的研究,并同天然边坡的安全系数和破坏面进行比较,计算结果表明,这3类边坡滑动面的形状基本一致,天然边坡安全系数要高于填筑和开挖边坡;同时比较了采用有限元稳定评价方法和采用极限平衡方法计算结果的差别;最后分析研究了计算参数变化对填筑和开挖边坡稳定性的影响。 相似文献
2.
In 1986, the Malaysian Highway Authority constructed a series of trial embankments on the Muar Plain (soft marine clay) with the aim of evaluating the effectiveness of various ground improvement techniques. This study investigates the effect of two such ground improvement schemes: (a) preloading of foundation with surface geogrids and synthetic vertical drains and (b) sand compaction piles. The paper is focused on the finite element analysis of settlements and lateral displacements of the soft foundation. In scheme (a), the numerical predictions are compared with the field measurements. In scheme (b), only the numerical analysis is presented and discussed in the absence of reliable measurements due to the malfunctioning of the electronic extensometer and inclinometer system during embankment construction. The current analysis employs critical state soil mechanics, and the deformations are predicted on the basis of the fully coupled (Biot) consolidation model. The vertical drain pattern is converted to equivalent drain walls to enable plane strain modelling, and the geogrids are simulated by linear interface slip elements. The effect of sand compaction piles is investigated considering both ideal drains and non-ideal drains, as well as varying the pile stiffness. © 1997 by John Wiley & Sons, Ltd. 相似文献
3.
Abdolreza Moharrami Yousef Hassanzadeh Farzin Salmasi Gholam Moradi Gholamreza Moharrami 《Arabian Journal of Geosciences》2014,7(5):1957-1964
Slope stability analysis during rapid drawdown is an important consideration in the design of embankment dams. During rapid drawdown, the stabilizing effect of the water on the upstream face is lost, but the pore water pressures within the embankment may remain high. As a result, the stability of the upstream face of the dam can be much reduced. Installing horizontal drains is a very efficient and cost-effective method for reducing the pore water pressure and increasing the stability of the upstream slope. The theory of horizontal drains in the upstream shell of earth dams is well established, but there seems to be limited resources available for the design of this type of horizontal drains. Hence, this study is focused on the performance of horizontal drains in the upstream shell of the slope of earth dams on the upstream slope stability during rapid drawdown conditions. The parametric study has been conducted on the variation of horizontal drain parameters such as the number of drains, their length, and their location. In this study, ten scenarios were analyzed based on different drainage configurations and the performance of each scenario is investigated on the seepage and the upstream slope stability during rapid drawdown conditions using finite element and limit equilibrium methods. The results demonstrated that the stability of the upstream slope during rapid drawdown conditions increases by increasing the number of drains. The length of drains extending further from its intersection with the critical failure surface does not provide any significant change in the factor of safety. Finally, the study also found that installing drains in the lower region of the upstream shell of earth dams gives more stability than those installed in higher elevations. 相似文献
4.
安全系数的计算和临界滑动面的确定是边坡稳定性分析的两个组成部分,强度折减法可以得到合理的安全系数,但却不能准确刻画临界滑动面的位置。基于对滑动现象的认识,提出了一种基于位移场分析的临界滑动面确定方法,认为当边坡处于临界状态时,其潜在滑动面附近的位移等值线最为密集,潜在滑动面上的点往往是在深度方向上沿垂直滑面的位移变化率达到最大值的位置。将本文方法与Spencer法、岩质边坡模型试验进行了对比,验证了该方法在曲线和折线滑动面搜索方面的适用性和可靠性。同时,探讨了单元形状、疏密程度、离散点间距等因素对滑动面的影响。 相似文献
5.
基于均质路堤边坡Monte Carlo法的稳定可靠度计算,分析了临界滑面搜索策略和稳定分析方法两类模型不确定性对边坡可靠度的影响特性,讨论了边坡失效概率随土工参数变异性的变化规律。研究表明,选用不同的临界滑面搜索策略所得可靠度结果差异不大,参数滑面法（overall slope）的失效概率略大于均值滑面法（global minimum）,但差别对边坡稳定性分析没有实质性影响;土性参数变异水平是影响边坡可靠度的最重要因素,边坡在相同设计参数安全系数下的可靠度指标随参数变异性增大而急剧降低;不同稳定性分析方法对应的安全系数概率密度函数曲线形态基本一致,但失效概率差异明显,因此目标可靠度指标取值应与稳定性分析方法相适应。提出的考虑土工参数变异水平的安全系数取值修正原则,对改进确定性设计的边坡稳定分析技术有积极意义。 相似文献
6.
圆弧滑动有限元土坡稳定分析 总被引：13，自引：0，他引：13
提出一种基于有限元应力变形计算的边坡稳定分析方法,仍假定滑动面形状为圆弧形,有限元网格由一组同心圆作为纬线,一组竖向线为经线构成。对两相邻圆弧线所夹的弧形带分析滑动力和抗滑力,建立平衡方程,确定安全系数,其中小值安全系数对应的弧形带为可能的滑动带。变化圆心位置用优选方法寻找最小安全系数对应的圆心,从而得出真正的滑动面。算例分析表明,该方法计算所得安全系数与Bishop法接近,是合理的,其突出优点是由有限元计算直接得出滑面上的应力,而不须作近似的插值处理,因而应力更准确。该方法可以考虑土的非线性变形特性,也更符合土的实际情况。此外,用有限元计算得出位移,亦可将稳定分析和变形联系起来,为现场通过位移监测来估计边坡的稳定性提供了可能性,同时也为膨胀土边坡的稳定分析中考虑膨胀性的影响提供了可能性。 相似文献
7.
An improved search strategy for the critical slip surface using finite element stress fields 总被引：17，自引：0，他引：17
The finite element method can be used to advantage in slope stability problems. This paper proposes a technique to search for the critical slip surface as well as to define and calculate the factor of safety for the slope, when the finite element method is used to model its formation. First, stresses are estimated at each Gaussian point from the finite element analysis. Then, the global stress smoothing method is applied to get a continuous stress field. Based on this stress field, the factor of safety is calculated for a specified slip surface by a stress integration scheme. An improved search strategy is proposed for a noncircular critical surface which starts with a search method for a circular critical surface. During the search process, points defining a trial slip surface can freely move in the finite element mesh subject to some kinematical constraints. This method can be applied to both the limit equilibrium method and the finite element method. Effects of the slope stress history and soil parameters on the resulting critical surface are investigated. 相似文献
8.
结合传统极限平衡方法和现代极限平衡方法,对圆弧滑动边坡进行垂直条分,将条块间的作用力一般化,提出了基于圆弧滑动的改进条分法。建立了圆弧滑动边坡的力学计算式,确定了一般化的条间力影响系数和边坡安全系数的关系式。运用数值计算和迭代程序,得出滑体分别在力平衡和力矩平衡下的安全系数随条间力影响系数变化情况,从而定量地描述了边坡稳定状态。结果表明,圆弧滑动垂直条分改进方法反映了滑动面和垂直面相互影响情况,数值计算简便,而且精度较高。 相似文献
9.
临界滑动面搜索是边坡稳定分析中很重要的内容,针对现有方法的不足,提出了一种新的搜索方法。基于边坡稳定性的整体分析法,建立了确定临界滑面的非线性优化模型。该模型将滑面离散点的纵坐标和安全系数都视为独立变量,目标函数取为安全系数本身,约束条件是平衡方程组和滑面凸性。由于目标函数是线性函数,约束条件至多是二次多项式,非线性程度较低,可采用经典优化算法和常见的非线性优化工具求解,比如Matlab。通过实例分析并与传统的滑面搜索方法进行对比表明,所建议的方法在数值稳定性及收敛性方面均具有优势。 相似文献
10.
降雨入渗过程中孔隙水压力的升高与基质吸力的降低引起边坡稳定性的下降,是导致边坡滑塌的主要诱导因素。利用饱和-非饱和渗流有限元计算得到的孔隙水压力场,基于Fredlund提出的非饱和土抗剪强度理论,对边坡临界滑动场进行改进,提出可以考虑降雨过程的边坡临界滑动场数值模拟方法,能够方便、快速地计算出边坡局部、整体安全系数和相对应的临界滑动面在降雨过程中的变化历程。将该法用于一个典型均质边坡和一个非均质边坡在降雨过程中的稳定性计算,分析降雨持续时间、降雨强度和非饱和强度参数取值等因素对边坡稳定性的影响,并将计算结果与其他方法进行比较,结果表明临界滑动场方法能搜索任意形状最危险滑面,计算的安全系数合理。 相似文献
11.
基坑土钉支护边坡有限元稳定性分析方法探讨 总被引：4，自引：1，他引：3
针对基坑土钉支护开挖边坡的稳定性,讨论了极限平衡方法的局限性,指出应用有限元方法分析评价基坑土体结构稳定性是近年来研究的新趋势。采用滑面应力分析法和强度折减法两种有限元方法对基坑边坡的稳定性进行了研究。对于无支护的基坑边坡,两种有限元方法得到的安全系数和滑动面结果一致,且滑动面形状随基坑土体强度的降低保持不变。对于采用土钉支护的基坑边坡,两种有限元方法得到的安全系数结果一致,不同阶段下滑动面形状和位置不同,这主要是由于在强度折减时,仅仅对土体强度参数进行折减,而未考虑土钉自身强度的降低。最后指出,在应用强度折减法时,是否考虑土钉自身强度的折减有待进一步研究。 相似文献
12.
临界滑动面的获得是土质边坡稳定性分析中一个必要的过程,然而现有分析方法难以保证该临界滑面的准确性,而且部分分析方法在计算过程中会陷入局部最小值陷阱。基于单变量方法和最速梯度法,提出了交替变量局部梯度法,该方法能够突破最优化方法应用在边坡稳定性分析上的瓶颈。首先,通过斯宾塞极限平衡方法和网格搜索法（或者其他确定临界滑面的方法）,获得边坡初始椭球状临界滑面;其次,在该滑面上布置若干节点作为变量,目标函数为安全系数Fs关于空间节点坐标Zi的方程,为了使目标函数快速降低,沿负梯度方向循环优化每个节点,当满足一定精度要求时,即可获得三维土质边坡非圆弧状临界滑动面;最后,通过算例证明该方法可行,计算结果可靠。 相似文献
13.
Three-dimensional analysis of embankments on soft soils incorporating vertical drains by finite element method 总被引：4，自引：0，他引：4
Jos Leito Borges 《Computers and Geotechnics》2004,31(8):665-676
Three-dimensional behaviour of an embankment on soft soils incorporating vertical drains is analysed by a numerical model based on the finite element method. The model, which incorporates the Biot’s consolidation theory (coupled formulation of the flow and equilibrium equations) and constitutive relations simulated by the p–q–θ critical state model, is applied on both the embankment with vertical drains (three-dimensional analysis) and the same problem but without vertical drains (two-dimensional analysis). Special emphasis is given to the analysis, during and after the construction period, of the excess pore pressures, settlements, horizontal displacements and stress levels. 相似文献
14.
The seismic design method for earth structures considers only the safety factor, subsidence and sliding displacement. However, the estimation of the size of slope failures is necessary to judge the remaining function of an embankment after an earthquake event. The size of slope failures due to an earthquake is investigated by considering the heterogeneity of the ground strength and was based on slope stability analysis of two case histories: the 2001 Geiyo Earthquake (Mj6.7) and 2009 Suruga Bay Earthquake (Mj6.5). As a result, we propose a method for slope failure size estimation based on the maximum slip surface. The proposed method enables a rational assessment of the functional loss of an embankment in terms of the slope failure size. 相似文献
15.
在平面应变条件下,从考虑强度折减的滑动土体极限平衡方程出发,推导出一般情况下均质土坡稳定分析的泛函极值等周模型。依据泛函取极值时必须满足的欧拉方程,通过坐标变换对变分问题求解,得到滑裂面函数及其上分布的法向应力函数。对于给定的边界条件及横截条件,土坡稳定问题转化为求解以两个拉格朗日乘子、安全系数和滑裂面一个端点的x坐标为4个未知量的函数极值问题,可以通过数值计算得到最小安全系数及所对应的最危险滑裂面。考虑坡顶拉裂缝,通过算例分析了不同的滑裂面位置及对应的安全系数。通过对ACADS边坡考题算例分析,在不考虑坡顶开裂的条件下,采用该方法的分析结果与依据极限平衡法得到的各裁判答案非常接近,在考虑坡顶开裂时,安全系数略有减小。 相似文献
16.
Slope stability analysis is one of the most intricate problems of geotechnical engineering because it is mathematically difficult to search the critical slip surface of earth slopes with complex strata owing to the involved multimodal function optimization problem. At present, a minimum factor of safety for a non-circular slip surface in a uniform and unreinforced earth slope can be calculated using several methods; however, for a reinforced soil slope, it cannot be easily calculated because of the additional effect of the reinforcement. One efficient method to search the critical slip surface is particle swarm optimization (PSO). PSO can solve complex non-differentiable problems, and its increasing ease of use has facilitated its application to multimodal function optimization problems in a variety of fields. However, the recommended PSO parameters to calculate the safety factors of unreinforced and reinforced soil slopes, namely the inertia and local and global best solution weighting coefficients, have not been sufficiently investigated. Moreover, the computational efficiency of PSO for safety factor calculation, including computational accuracy and time, has not been clarified. To calculate the unreinforced and reinforced soil slope safety factors, this study considers force and moment equilibriums, including the tensile force of the reinforcement. Firstly, the computational efficiency of the calculation process by PSO was shown to increase the maximum number of slip surface nodes in the calculation of the safety factor. Then, an analysis was carried out to investigate the safety factor sensitivity to the PSO parameters. Based on this analysis, appropriate PSO parameters for the safety factor calculation of unreinforced and reinforced soil slopes were proposed.
相似文献17.
18.
19.
抚顺市东岗道桥公路由于连接东、西露天矿的隧道施工及东露天矿西端帮剥离致使东露天矿西端帮土体滑移,路面出现裂隙、变形,迫使东侧公路停用。结合地质情况,采用压密注浆施工技术对东露天矿西端帮边坡土体、公路进行压密注浆加固处理。经测量数据检验,东露天矿西端帮边坡及公路沉降变形趋于稳定,达到预期效果,保证了东露天矿西端帮边坡稳定及公路的正常安全使用。 相似文献
20.
A Simple Monte Carlo Method for Locating the Three-dimensional Critical Slip Surface of a Slope 总被引：2，自引：0，他引：2
XIE Mowen Institute of Environmental Systems Kyushu University Hakozaki -- Higashi Ku Fukuok Japan College of Resource Engineering the University of Science Technology Beijing Xueyuan Ro Haidian District Beijing China 《《地质学报》英文版》2004,78(6):1258-1266
Based on the assumption of the plain-strain problem, various optimization or random search methods have been developed for locating the critical slip surfaces in slope-stability analysis, but none of such methods is applicable to the 3D case. In this paper, a simple Monte Carlo random simulation method is proposed to identify the 3D critical slip surface. Assuming the initial slip to be the lower part of a slip ellipsoid, the 3D critical slip surface is located by means of a minimized 3D safety factor. A column-based 3D slope stability analysis model is used to calculate this factor. In this study, some practical cases of known minimum safety factors and critical slip surfaces in 2D analysis are extended to 3D slope problems to locate the critical slip surfaces. Compared with the 2D result, the resulting 3D critical slip surface has no apparent difference in terms of only cross section, but the associated 3D safety factor is definitely higher. 相似文献