共查询到20条相似文献，搜索用时 250 毫秒
1.
Discrete element method modeling of inherently anisotropic rocks under uniaxial compression loading 
下载免费PDF全文
下载免费PDF全文 A new numerical approach is proposed in this study to model the mechanical behaviors of inherently anisotropic rocks in which the rock matrix is represented as bonded particle model, and the intrinsic anisotropy is imposed by replacing any parallel bonds dipping within a certain angle range with smooth‐joint contacts. A series of numerical models with β = 0°, 15°, 30°, 45°, 60°, 75°, and 90° are constructed and tested (β is defined as the angle between the normal of weak layers and the maximum principal stress direction). The effect of smooth‐joint parameters on the uniaxial compression strength and Young's modulus is investigated systematically. The simulation results reveal that the normal strength of smooth‐joint mainly affects the behaviors at high anisotropy angles (β > 45°), while the shear strength plays an important role at medium anisotropy angles (30°–75°). The normal stiffness controls the mechanical behaviors at low anisotropy angles. The angle range of parallel bonds being replaced plays an important role on defining the degree of anisotropy. Step‐by‐step procedures for the calibration of micro parameters are recommended. The numerical model is calibrated to reproduce the behaviors of different anisotropic rocks. Detailed analyses are conducted to investigate the brittle failure process by looking at stress‐strain behaviors, increment of micro cracks, initiation and propagation of fractures. Most of these responses agree well with previous experimental findings and can provide new insights into the micro mechanisms related to the anisotropic deformation and failure behaviors. The numerical approach is then applied to simulate the stress‐induced borehole breakouts in anisotropic rock formations at reduced scale. The effect of rock anisotropy and stress anisotropy can be captured. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
2.
Effects of Material Composition and Water Content on the Mechanical Properties of Landslide Deposits Triggered by the Wenchuan Earthquake 总被引：3，自引：0，他引：3
Abundant landslide deposits were triggered by the Wenchuan earthquake, providing a rich source of material for subsequent debris flows or slope failures under rainfall conditions. A good understanding of the physical and mechanical properties of the landslide deposits is very important to the research on slope failure mechanisms and the initiation of debris flow. Laboratory biaxial compression tests are used to study the material compositions and water content impacts on the mechanical properties of landslide deposits, and a discrete element method (a bond-contact model) is used to study the particle stiffness, bond force, friction coefficient and confining stress impact on the mechanical behaviors and the relationships between the numerical and experimental parameters. The experimental results show that the failure stress of landslide deposits is decreased with increasing content of fine particles and also with increased water content, especially at the initial increasing stage. Cohesion of the saturated landslide deposits is increased, but the friction angle is decreased with the increase in the fine particle content. Shear strength parameters (the cohesion and friction angle) are decreased with the increasing water content at the initial increasing stage, and then, they slowly decrease. There is a critical value of the water content at 5%–7% (in weight) for the failure stress and shear strength parameters of the landslide deposits. Quadratic equations are presented to describe the relation between the bond force and cohesion, and the numerical friction coefficient and the experimental friction angle. 相似文献
3.
采用变量控制法较全面地分析了各细观参数与宏观参数的定量关系,表明：弹性模量E随颗粒模量Ec、黏结模量 、平行黏结半径乘子 呈线性增长,随颗粒刚度比kn /ks、黏结刚度比 呈对数减小;泊松比则主要受kn /ks和 的影响,两者之间呈对数关系;颗粒键的黏结强度决定了材料的强度,室内材料黏聚力c和抗拉强度 主要受法向平行黏结强度 、平行黏结强度比 的影响,随 线性增长,随 对数减小;摩擦角 主要受颗粒摩擦系数u影响,两者呈对数关系。分析裂隙扩展特征,表明材料法向黏结强度 和切向黏结强度 的相对大小决定裂纹分布规律,随 增大,岩样的拉破坏区域减少,而压剪破坏区域增加,破坏面由剪切破坏向共轭破坏发展;材料的强度离散性越小,岩样破坏趋于集中,破坏面明显,强度均值标准差比值 >3.5为宜; 增加,宏观破坏形式向共轭破坏发展。细观参数的选取除了匹配强度参数,同时还需要考虑破坏形式的一致,考虑多参数相互影响,建立了宏细观参数之间的经验公式,对细观参数进行优化选择,并做了实例验证。室内试验和数值模拟获得的峰值荷载、变形参数、剪切强度等数值接近,应力-应变演化规律相同,破坏形态一致,表明细观参数结果是可靠的。 相似文献
4.
The strength and deformability of rock masses transected by non-persistent joints are controlled by complex interactions of joints and intact rock bridges. The emergence of synthetic rock mass (SRM) numerical modelling offers a promising approach to the analysis of rock masses, but has not been rigorously compared with actual physical experiments. In this work, SRM modelling by the discrete element software PFC3D is used to investigate the effect of geometric parameters of joints on the rock mass failure mechanism, unconfined compressive strength and deformation modulus. Firstly, a validation study is undertaken to investigate the ability of SRM modelling to reproduce rock mass failure modes and strength as determined by uniaxial and biaxial compression testing in the laboratory. The numerical analyses agree well with physical experimentation at low confining pressure. A sensitivity study is then undertaken of the effect of joint configuration parameters on the failure mode, unconfined compressive strength and deformation modulus of the rock mass. Five failure modes are predicted to occur: intact rock, planar, block rotation, step-path and semi-block generation. It is found that the failure mode is determined principally by joint orientation and step angle and the joint orientation with respect to principal stress direction is the parameter with the greatest influence on rock mass properties. 相似文献
5.
This paper presents a numerical study of fracturing process induced by excavation around a gallery using an extended rigid block spring method (RBSM). The surrounding rock mass is characterized by an assembly of rigid blocks based on a degraded Voronoi diagram. The macroscopic mechanical behavior of rock is related to that of interfaces between blocks. The mechanical behavior of each interface is described by its elastic stiffness and failure criterion. The failure process of interface is controlled by both normal stress and shear stress. Both tensile and shear failures are considered. The macroscopic fracturing process is described by the coalescence of cracked interfaces. The rock structural anisotropy is taken into account through a spatial variation of elastic stiffness and failure strength of interfaces. A series of sensitivity studies are performed to investigate effects of gallery orientation, failure strength of interfaces and rock structural anisotropy on gallery deformation and fracturing. Numerical results are compared with in-situ observations in terms of fracture patterns. 相似文献
6.
为探究锚固节理在直剪加载作用下的细观力学响应,利用颗粒流数值计算方法建立不同锚固角度下的锚固节理数值模型,并进行不同法向荷载下的直剪试验。之后,通过分析和对比剪切-位移曲线和峰值剪切强度来对锚固节理宏观力学性质进行研究。与此同时,基于微裂纹分布规律,从细观角度揭示了剪切荷载下不同锚固角度的岩石节理面的破坏特征;研究结果显示。（1）不同于非锚固节理,锚固节理的剪切-位移曲线在剪切后期呈现出一定的增长趋势,且粗糙度不同曲线变化特征存在一定的差异。（2）不同锚固角度下,锚固节理的破坏模式存在着较为明显的差异。当锚固角为90°时,锚固节理模型的破坏主要集中于锚杆与上下节理面接触位置,且破坏主要为挤压式破坏。随着锚固角度的减小,接触位置的破碎区域不断减小,节理破坏主要表现为沿着锚杆的轴向拉伸变形破坏及内部的拉伸破坏。（3）锚固角度的变化对锚固节理的抗强度的影响程度与节理面的粗糙度存在一定关联。具体而言,较为平直节理抗剪强度随着锚固角度的增大,增长趋势明显,而粗糙节理面随着锚固角度的增大峰值抗剪强度的变化趋势相对较为平缓。 相似文献
7.
卵砾石地层被掘削时,其主要破坏模式并非一般的宏观整体剪切破坏,而是刀具切入卵砾石间的缝隙,将卵砾石颗粒剥离出原始地层,该过程较为契合颗粒离散元的物理力学假设。为确定掘削工况下的颗粒材料最优细观参数,对不同的颗粒接触法向刚度、接触刚度比、粒间摩擦系数、颗粒形状、颗粒尺寸等的颗粒材料开展了截割三维仿真试验,并分析研究了不同细观参数对掘削效果的影响。计算结果显示:颗粒接触法向刚度、接触刚度比的多种细观参数组合可以对应同一个宏观弹性模量值,接触刚度比大的细观参数组合的抗掘削能力更大。颗粒形状、粒间摩擦系数的多种细观参数组合可以对应同一个内摩擦角值,形状复杂的颗粒材料具有更大的抗掘削能力。在宏观参数相同的情况下,平均粒径更大的颗粒材料抗掘削能力更大。因此,利用颗粒离散元模拟掘削卵砾石地层问题时,除需保证虚拟颗粒材料的宏观整体剪切破坏响应与真实材料基本一致外,还需根据材料的抗掘削能力进一步标定细观参数,以获得更贴近实际情况的模拟效果。文章提出的方法可以为其他颗粒离散元掘削工况数值模拟中的参数标定提供参照依据。 相似文献
8.
In nature, there exist several forms of anisotropy in rock masses due to the presence of bedding planes, joints, and weak layers. It is well understood that the anisotropic properties of jointed rock masses significantly affect the stability of surface and underground excavations. However, these critical anisotropic characteristics are often ignored in existing uniaxial dynamic failure criteria. This study investigates the effect of a pre-existing persistent joint on the rate-dependent mechanical behaviours of a rock mass using a particle mechanics approach, namely, bonded particle model (BPM), to realistically replicate the mechanical response of the rock mass. Firstly, in order to capture the rate-dependent response of the jointed rock mass, the BPM model is validated using published experimental data. Then, a dynamic strength model is proposed based on the Jaeger criterion and simulation results. To further investigate the dynamic behaviours, the dynamic uniaxial compressive strength (UCS) for anisotropic rock masses with various joint orientations is investigated by subjecting the BPM models to uniaxial compression numerical tests with various strain rate. The proposed dynamic strength model is validated based on numerical simulation results. Finally, the fragmentation characteristics of the jointed rock masses are analysed, which demonstrate that the failure mode affects the dynamic UCS. This is further confirmed by the analysis of the orientations of microscopic cracks generated by the compression loading. 相似文献
9.
Analytical model for the mechanical behaviour of bolted rock joints subjected to shearing 总被引：5，自引：0，他引：5
Summary This study proposes a new analytical model for the prediction of the contribution of bolts to the shear strength of a rock joint. The main characteristics of this model are the accounts for the interaction of the axial and the shear forces mobilised in the bolt, as well as the large plastic displacements of the bolt occurring during the loading process. The complete curve of the bolt contribution as a function of the displacement along the joint can be computed, and the maximum bolt contribution is obtained by dissociating the bolt cohesion and the confinement effects. The comparison of the performances of this analytical model with test results shows its capacity to describe the observed phenomena. The effects of the most important parameters such as bolt inclination, mechanical properties of bolt material, rock strength and joint friction angle are clearly established and discussed. 相似文献
10.
结构面的存在改变了岩体力学性质,影响了岩体强度特征。基于统计岩体力学强度判据,结合摩尔-库仑准则,得到了含单组结构面岩体破坏的4种不同方式和相应的结构面倾角范围,推导了岩体强度由结构面控制转化为应力控制的临界围压表达式。在此基础上,根据岩石和结构面参数之间的关系,将含单组结构面岩体分为4类,并探讨了可能破坏方式和发生破坏的条件。最后,举例分析了含单组结构面闪长岩的强度特征,结果表明,该岩体属于第I类岩体,在垂向受压时先沿结构面后沿岩块破坏,临界围压为9.12 MPa;从全空间分析,该岩体强度各向异性显著,围压增大可使岩体在一些方向上受力时强度由结构控制转化为应力控制。 相似文献
11.
针对非贯通裂隙岩体工程结构中的受荷岩体,提出受荷细观损伤与裂隙宏观损伤的概念。以完整岩石的初始损伤状态作为基准损伤状态,综合考虑裂隙宏观缺陷的存在、微裂纹细观缺陷在受荷下的损伤扩展以及宏细观缺陷在受荷过程中的耦合,基于Lemaitre应变等效假设,推导了考虑宏细观缺陷耦合的复合损伤变量,并给出同时考虑试件尺寸、裂隙几何与力学特性的宏观损伤变量的计算公式,从而建立了基于宏细观缺陷耦合的非贯通裂隙岩体在荷载作用下的损伤本构模型。用宏细观损伤耦合的本构模型来描述非贯通裂隙岩体在受荷过程中的细观损伤演化与宏观损伤行为,与非贯通裂隙岩体实际受荷情况符合较好。研究结果表明：（1）完整岩样和裂隙岩样的应力-应变行为在峰值强度之前差异较大,峰值强度以后差异逐渐减小,最后趋于一致,二者具有相近的残余强度;（2）裂隙岩体强度随裂隙贯通率的增加而增大,随裂隙倾角的变化具有明显的各向异性,同时还与裂隙面的内摩擦角有关;（3）裂隙倾角为90°时,裂隙岩样的峰值强度最高;张开型裂隙岩样的裂隙倾角为45°时,峰值强度最低;（4）非贯通裂隙岩体工程结构中的受荷岩体,其力学性能由受荷细观损伤与裂隙宏观损伤及其耦合效应所决定,基于宏细观损伤耦合的复合损伤变量可以较好地反映非贯通裂隙岩样的力学特性。 相似文献
12.
基于遍布节理模型的边坡稳定性强度折减法分析 总被引：10，自引：4，他引：6
采用非线性数值分析方法分析边坡稳定性问题时,强度折减法因其具有较多的优点而得到广泛应用。岩土体一般采用理想弹塑性模型,屈服准则为广义米赛斯准则。对于密集节理岩质边坡稳定性问题,采用遍布节理模型可同时考虑岩块和节理属性,更符合岩体状态及工程实际,认为岩体经强度折减后潜在破坏可能首先出现在岩体中或沿节理面或二者同时破坏。结合工程实例,基于遍布节理模型的强度折减法计算结果表明,潜在滑移面为折线型滑面,下部潜在滑移面倾角与节理面等效内摩擦角基本一致,上部潜在滑移面与岩体拉破坏相关;节理倾角与边坡安全系数、潜在滑动范围密切相关,陡倾角节理对边坡稳定性影响较小。通过对边坡失稳判据和边坡滑移面确定的探讨,认为以力或位移不收敛作为边坡失稳判据是适当的,而边坡的剪应变速率物理意义十分明确,适于作为边坡潜在滑移面的确定依据。 相似文献
13.
The deformation process and failure mechanism of rock mass with increased joint roughness subjected to unconfined compression are investigated in this study using discrete element method. A numerical model is developed using soft-bonded particle and validated to realistically replicate the mechanical response of the rock mass. The micro-parameters of the rock material are first determined, and the effects of the joint roughness on the macromechanical response and fracture growth mechanism are then investigated. Analyses are also performed to examine the tensile and shear crack distributions, acoustic emission (AE) characteristics, coordination number, and crack anisotropy to advance the current understanding of the role of joint roughness on the mechanical behavior and deformability of rock mass. The results show that strength and deformability of the jointed rocks are highly dependent on the joint orientation and roughness. Joint roughness is found to restrain the propagation and coalescence of microcracks and AE events from the interlocking of asperities. In addition, the spatial distribution of the contact forces allows for better understanding of the effect of joint inclination angle on the response of the investigated rock samples.
相似文献14.
天然岩体中常含有多组相互交叉的贯通节理,它们的存在极大地削弱了岩体的力学性质。为了研究含两组交叉贯通节理岩体的强度及破坏特征,基于弹塑性数值流形方法,对不同应力状态下,节理倾角和节理间距不同的岩体压缩试验进行数值模拟。结果表明：岩体强度随节理倾角的变化曲线呈现出多波峰、多波谷特点,岩体强度随节理间距变化曲线符合负指数函数形式。根据节理状态,两组节理岩体的破坏模式可以分为3种：岩块破坏、沿一组节理滑移和沿两组节理滑移。两组节理均会影响岩体强度,一组起主要作用,另一组起次要作用,并且节理组之间存在相互影响。通过对数值计算结果进行回归分析,基于一组节理岩体强度预测模型,量化节理组之间的相互影响,提出适用于含两组交叉贯通节理岩体的强度预测模型。模型形式简单,使用方便,可为实际工程中正确评估岩体强度提供指导性意见。 相似文献
15.
为研究不同边界条件下剪切速率对岩石节理剪切力学特性的影响,采用RDS-200型岩石节理剪切试验系统对人工浇筑的具有相同节理形貌的不规则水泥节理试样进行了常法向应力和常法向刚度2种边界条件下5种剪切速率的直剪试验。结果表明：（1）常法向应力边界条件下,随剪切速率增大,相同法向应力下的类岩石节理峰前剪切刚度减速增大,峰值剪切强度和残余剪切强度呈对数降低;随剪切速率增大,类岩石节理黏聚力减速增大,内摩擦角呈对数降低。（2）常法向刚度边界条件下,随剪切速率增大,相同法向应力的类岩石节理峰前剪切刚度减速增大,峰值剪切强度呈对数降低,较高法向应力下的残余剪切强度先增大后减小;随剪切速率增大,类岩石节理黏聚力呈对数降低,内摩擦角减速增大。（3）与常法向应力边界条件相比,常法向刚度条件下,节理黏聚力平均增加了115.85%,内摩擦角平均降低了8.44%;相同初始法向应力和剪切速率下,峰前剪切刚度、峰值剪切强度和残余剪切强度分别平均增加了11.96%、19.47%和32.32%,峰值法向位移平均降低了40.12%。该研究结论可为不同剪切速率下地表和地下工程岩体节理的剪切失稳评价提供一定参考。 相似文献
16.
微震、工程爆破等低应力循环剪切荷载作用对节理岩体工程失稳破坏具有重要影响。为研究峰前循环剪切加卸载作用下岩石节理剪切力学特性,采用RDS-200型岩石节理剪切试验系统对人工劈裂黄砂岩节理进行了峰前循环剪切下的直剪试验。通过与未进行峰前循环剪切加卸载时岩石节理力学参数预测值对比,得到峰前循环剪切加卸载作用对峰前剪切刚度、峰值剪切强度、峰值剪切位移与残余剪切强度的影响。结果表明：（1）峰前循环剪切加卸载后,当法向应力为2 MPa时,岩石节理峰前剪切刚度增大,当法向应力为4～10 MPa时,岩石节理峰前剪切刚度在循环剪切应力幅值范围内增大,在超出循环剪切应力幅值时减小;（2）峰前循环剪切加卸载后,峰值剪切强度降低了10%～20%,降低百分比随法向应力增大整体呈对数函数增大;峰值剪切位移增加了2%～40%,增加百分比随法向应力增大整体呈对数函数减小;（3）峰前循环剪切加卸载后,岩石节理残余剪切强度无明显变化,峰值剪切强度与残余剪切强度差值减小,峰后剪切应力做功损失百分比降低。 相似文献
17.
为了研究不同倾角下多节理岩体力学行为,采用10 MN微机控制电液伺服大型多功能动静力三轴仪,开展包含较多预制非贯通节理类岩石试件的单轴压缩试验,研究了多节理岩体裂纹的特征、贯通模式、破坏模式、应力-应变特征等与节理倾角之间的关系。试验结果表明,（1）多节理岩体的裂纹类型主要有翼裂纹和次生共面裂纹,翼裂纹的扩展路径与单个节理情况下的扩展路径差异较大,翼裂纹起裂后沿起裂方向存在较长的扩展长度,直接与相邻节理或翼裂纹形成贯通,并且裂纹的贯通表现出四种不同的模式;（2）多节理岩体的破坏模式归纳为3种类型：平面破坏、块体转动式破坏和台阶式破坏;（3）根据多节理岩体的应力-应变曲线在应变软化阶段所表现出的不同非线性变形行为特征,可以将曲线归纳为4种类型;（4）多节理岩体的强度和变形各向异性特征非常显著,强度和弹性模量均在节理倾角30°时最小,90°时最大。 相似文献
18.
为了解黄土三轴剪切过程中的微观变化,采用PFC3D建立黄土三轴试验模型,模拟围压分别为0、50、150、300 kPa的三轴剪切试验,并与室内试验进行对比分析。分析结果表明：PFC3D能够较好地模拟出不同围压下从开始到破坏到残余变形整个过程中应力-应变的变化规律,且位移场及接触应力场的变化规律与室内三轴试验宏观现象较一致;发现弹性模量、泊松比及峰值强度与数值模型中微观参数有着密切的联系,如法向刚度kn控制试样宏观弹性模量,kn /ks值控制泊松比,摩擦系数控制峰值强度;通过体应变-轴向应变曲线发现,随着围压的增加应变能增大,试样呈现出由体积膨胀到体积减缩的变化规律。其研究结果为进一步探究黄土的应力-应变性状及抗剪强度特性提供参考。 相似文献
19.
Micromechanical parameters in bonded particle method for modelling of brittle material failure 总被引：1，自引：0，他引：1
Bonded particle modelling (BPM) is nowadays being extensively used for simulating brittle material failure. In BPM, material is modelled as a dense assemblage of particles (grains) connected together by contacts (cement). This sort of modelling seriously depends on the mechanical properties of particle and contact, which are named here as micro‐parameters. However, a definite calibration methodology to obtain micro‐parameters has not been so far established; and many have reported some serious problems. In this research, a calibration procedure to find a unique set of micro‐parameters is established. To attain this purpose, discrete element code of UDEC is used to perform BPM. This code can be conveniently developed by the user. The proposed BPM is composed of rigid polygonal particles interacting at their contact points. These contacts can undergo a certain amount of tension, and their shear resistance is provided by cohesion and friction angle. The results demonstrate that each material macro‐property (i.e. Young's modulus, Poisson's ratio, internal friction angel, internal cohesion, and tensile strength) is directly originated from and distinctly related to the contact properties (i.e. normal and shear stiffness, friction angel, cohesion, and tensile strength). Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
20.
为了研究节理对锚固岩体力学特征和失稳损伤演化的影响,采用对锚固贯通节理岩体进行室内剪切试验和PFC2D数值模拟的方法,研究不同节理倾角下锚固贯通节理岩体剪切性能的作用机制和破坏模式,研究结果表明:（1）随着节理倾角变化,贯通节理岩体呈现出不同的破坏形式,锚固贯通节理岩体的抗剪强度与剪切位移曲线并不是呈线性增长,而是呈"双驼峰"趋势。（2）锚固体系在剪切试验的过程中,节理面颗粒的接触方位角会发生一定程度的改变,主要集中在锚杆和节理倾角附近。（3）锚固体系在剪切试验的过程中,会因为颗粒间黏结键的断裂生成裂纹,裂纹数生成的越少,其抗剪强度越高,裂纹分为张拉裂纹和剪切裂纹,并且张拉裂纹的数量要远远大于剪切裂纹的数量。研究结论可用于实际工程破坏模式的预测和岩体工程稳定性评价。 相似文献