共查询到20条相似文献，搜索用时 359 毫秒
1.
The spectacular prominence eruption and CME of 31 August 2007 are analyzed stereoscopically using data from NASA??s twin Solar Terrestrial Relations Observatory (STEREO) spacecraft. The technique of tie pointing and triangulation (T&T) is used to reconstruct the prominence (or filament when seen on the disk) before and during the eruption. For the first time, a filament barb is reconstructed in three-dimensions, confirming that the barb connects the filament spine to the solar surface. The chirality of the filament system is determined from the barb and magnetogram and confirmed by the skew of the loops of the post-eruptive arcade relative to the polarity reversal boundary below. The T&T analysis shows that the filament rotates as it erupts in the direction expected for a filament system of the given chirality. While the prominence begins to rotate in the slow-rise phase, most of the rotation occurs during the fast-rise phase, after formation of the CME begins. The stereoscopic analysis also allows us to analyze the spatial relationships among various features of the eruption including the pre-eruptive filament, the flare ribbons, the erupting prominence, and the cavity of the coronal mass ejection (CME). We find that erupting prominence strands and the CME have different (non-radial) trajectories; we relate the trajectories to the structure of the coronal magnetic fields. The possible cause of the eruption is also discussed. 相似文献
2.
We study the interaction between an erupting solar filament and a nearby coronal hole, based on multi-viewpoint observations from the Solar Dynamics Observatory and STEREO. During the early evolution of the filament eruption, it exhibits a clockwise rotation that brings its easternmost leg in contact with the oppositely aligned field at the coronal hole boundary. The interaction between the two magnetic-field systems is manifested as the development of a narrow contact layer in which we see enhanced EUV brightening and bi-directional flows, suggesting that the contact layer is a region of strong and ongoing magnetic reconnection. The coronal mass ejection (CME) resulting from this eruption is highly asymmetric, with its southern portion opening up to the upper corona, while the northern portion remains closed and connected to the Sun. We suggest that the erupting flux rope that made up the filament reconnected with both the open and closed fields at the coronal hole boundary via interchange reconnection and closed-field disconnection, respectively, which led to the observed CME configuration. 相似文献
3.
We investigate the initiation and formation of Coronal Mass Ejections (CMEs) via a detailed two-viewpoint analysis of low corona observations of a relatively fast CME acquired by the SECCHI instruments aboard the STEREO mission. The event which occurred on 2 January 2008, was chosen because of several unique characteristics. It shows upward motions for at least four hours before the flare peak. Its speed and acceleration profiles exhibit a number of inflections which seem to have a direct counterpart in the GOES light curves. We detect and measure, in 3D, loops that collapse toward the erupting channel while the CME is increasing in size and accelerates. We suggest that these collapsing loops are our first evidence of magnetic evacuation behind the forming CME flux rope. We report the detection of a hot structure which becomes the core of the white light CME. We observe and measure unidirectional flows along the erupting filament channel which may be associated with the eruption process. Finally, we compare these observations to the predictions from the standard flare-CME model and find a very satisfactory agreement. We conclude that the standard flare-CME concept is a reliable representation of the initial stages of CMEs and that multi-viewpoint, high cadence EUV observations can be extremely useful in understanding the formation of CMEs. 相似文献
4.
We have employed a two-dimensional magnetohydrodynamic simulation code to study mass motions and large-amplitude coronal waves related to the lift-off of a coronal mass ejection (CME). The eruption of the filament is achieved by an artificial force acting on the plasma inside the flux rope. By varying the magnitude of this force, the reaction of the ambient corona to CMEs with different acceleration profiles can be studied. Our model of the ambient corona is gravitationally stratified with a quadrupolar magnetic field, resulting in an ambient Alfvén speed that increases as a function of height, as typically deduced for the low corona. The results of the simulations show that the erupting flux rope is surrounded by a shock front, which is strongest near the leading edge of the erupting mass, but also shows compression near the solar surface. For rapidly accelerating filaments, the shock front forms already in the low corona. Although the speed of the driver is less than the Alfvén speed near the top of the atmosphere, the shock survives in this region as well, but as a freely propagating wave. The leading edge of the shock becomes strong early enough to drive a metric type II burst in the corona. The speed of the weaker part of the shock front near the surface is lower, corresponding to the magnetosonic speed there. We analyze the (line-of-sight) emission measure of the corona during the simulation and recognize a wave receding from the eruption site, which strongly resembles EIT waves in the low corona. Behind the EIT wave, we clearly recognize a coronal dimming, also observed during CME lift-off. We point out that the morphology of the hot downstream region of the shock would be that of a hot erupting loop, so care has to be taken not to misinterpret soft X-ray imaging observations in this respect. Finally, the geometry of the magnetic field around the erupting mass is analyzed in terms of precipitation of particles accelerated in the eruption complex. Field lines connected to the shock are further away from the photospheric neutral line below the filament than the field lines connected to the current sheet below the flux rope. Thus, if the DC fields in the current sheet accelerate predominantly electrons and the shock accelerates ions, the geometry is consistent with recent observations of gamma rays being emitted further out from the neutral line than hard X-rays. 相似文献
5.
Solar filaments exhibit a range of eruptive-like dynamic activity from the full, or partial, eruption of the filament mass
and surrounding magnetic structure, as a CME, to a fully confined dynamic evolution or “failed” eruption, sometimes producing
a flare but no CME. Additionally, observations of erupting filaments often show a clear helical structure, indicating the
presence of a magnetic flux rope. Dynamic helical structures, in addition to being twisted, frequently show evidence of being
kinked, with the axis of the flux rope exhibiting a large-scale writhe. Motivated by the fact that kinking motions are also
detected in filaments that fail to erupt, we investigate the possible relationship between the kinking of a filament and its
success or failure to erupt. We present an analysis of kinking in filaments and its implications for other filament phenomena
such as the nature of the eruption, eruptive acceleration, and post-eruptive re-formation. We elucidate the relationship between
kinking and the various filament phenomena via a simple physical picture of the forces involved in kinking together with specific
definitions of the types of filament eruption. The present study offers results directly applicable to observations, allowing
a thorough exploration of the implications of the observational relationship between kinking and filament phenomena and provides
new insight for modelers of CME initiation. 相似文献
6.
We report on the occurrence of Hα dimming associated with a sigmoid eruption in a quiet-sun region on 14 August 2001. The
coronal sigmoid in soft X-ray images from the Yohkoh Soft X-ray Telescope was located over an Hα filament channel. Its eruption was accompanied by a flare of GOES X-ray class
C2.3 and possibly associated with a halo coronal mass ejection (CME) observed with the Large Angle and Spectroscopic Coronagraphs (LASCO) on board the Solar and Heliospheric Observatory (SOHO). During the eruption, coronal bipolar double dimming took place at the regions with opposite magnetic polarities around
the two sigmoid ends, but the underlying chromospheric channel did not show observable changes corresponding to the coronal
eruption. Different from the erupting coronal sigmoid itself, however, the coronal dimming had a detectable chromosphere counterpart,
i.e., Hα dimming. By regarding the sigmoid as a coronal sign for a flux rope, these observations are explained in the framework
of the flux rope model of CMEs. The flux rope is possibly deeply rooted in the chromosphere, and the coronal and Hα dimming
regions mark its evacuated feet, through which the material is possibly fed to the halo CME. 相似文献
7.
Coronal mass ejections (CMEs) are considered as one of the driving sources of space weather. They are usually associated with many physical phenomena, e.g. flares, coronal dimmings, and sigmoids. To detect these phenomena, traditional supervised-learning methods assumed that at most one event occurred in a CME; therefore each CME instance is associated with a single label and the phenomenon is processed in isolation. This simplifying assumption does not fit well, as CMEs might have multiple events simultaneously. We propose to detect multiple CME-associated events by multi-label learning methods. With the data available from the Atmospheric Imaging Assembly (AIA) and the Large Angle and Spectrometric Coronagraph (LASCO), texture features representing the events are extracted from all of the associated and not-associated CMEs and converted into feature vectors for multi-label learning use. Then a function is learned to predict the proper label sets for CMEs, such that eight events, i.e. coronal dimming, coronal hole, coronal jet, coronal wave, filament, filament eruption, flare, and sigmoid, are detected explicitly. To test the proposed detection algorithm, we adopt the four-fold cross-validation strategy on a set of 551 labeled CMEs from AIA. Experimental results demonstrate the good performance of the multi-label classification methods in terms of test error. 相似文献
8.
Brigitte Schmieder 《Journal of Astrophysics and Astronomy》2006,27(2-3):139-149
The majority of flare activity arises in active regions which contain sunspots, while Coronal Mass Ejection (CME) activity can also originate from decaying active regions and even so-called quiet solar regions which contain a filament. Two classes of CME, namely flare-related CME events and CMEs associated with filament eruption are well reflected in the evolution of active regions. The presence of significant magnetic stresses in the source region is a necessary condition for CME. In young active regions magnetic stresses are increased mainly by twisted magnetic flux emergence and the resulting magnetic footpoint motions. In old, decayed active regions twist can be redistributed through cancellation events. All the CMEs are, nevertheless, caused by loss of equilibrium of the magnetic structure. With observational examples we show that the association of CME, flare and filament eruption depends on the characteristics of the source regions: ?the strength of the magnetic field, the amount of possible free energy storage, ?the small- and large-scale magnetic topology of the source region as well as its evolution (new flux emergence, photospheric motions, cancelling flux), and ?the mass loading of the configuration (effect of gravity). These examples are discussed in the framework of theoretical models. 相似文献
9.
We use Yohkoh soft X-ray telescope data and H full-disk observations to study the evolution of chromospheric filaments and coronal sigmoids in 6 active regions in association with coronal mass ejections (CMEs). In two cases, CMEs are directly observed by the SOHO/LASCO C2 coronagraph. In four cases, other observations (magnetic clouds, geomagnetic storms, sigmoid-arcade evolution) are used as CME indicators. Prior to eruption, each active region shows a bright coronal sigmoidal loop and underlying H filament. The sigmoid activates, erupts and gets replaced by a cusp, or an arcade. In contrast, the H filament shows no significant changes in association with sigmoid eruption and CME. We explain these observations in a framework of the classical two-ribbon flare model. 相似文献
10.
We will present detailed observations of the asymmetrical eruption of a large quiescent filament on 24 November 2002, which was followed by a two-ribbon flare, three coronal dimmings, endpoint brightenings, and a very fast halo-type coronal mass ejection (CME). Before the eruption, the filament lay along the main neutral line (MNL) underneath a single-arcade helmet streamer with a simple bipolar configuration. However, photospheric magnetic fields on both sides of the filament showed an asymmetrical distribution, and the filament and MNL were not located just at the center of the streamer base but were closer to the eastern leg of the streamer arcade. Therefore, instead of erupting along the streamer’s symmetrical axis, the filament showed a nonradial and asymmetrical eruption. It lifted from the eastern flank of the streamer arcade to impact the western leg directly, leading to an asymmetrical CME that expanded westward; eventually the streamer was disrupted significantly. Accordingly, the opposite-polarity coronal dimmings at both sides of the filament forming in the eruption also showed an asymmetrical area distribution. We thus assume that the streamer arcade could guide the filament at the early eruption phase but failed to restrain it later. Consistent with previous results, these observations suggest that the global background magnetic field can impose additional action on the initial eruption of the filament and CME, as well as the dimming configuration. 相似文献
11.
We present the first evidence for occurrences of magnetic interactions between a jet, a filament and coronal loops during a complex event, in which two flares sequen-tially occurred at different positions of the same active region and were closely associated with two successive coronal mass ejections (CMEs), respectively. The coronal loops were located outside but nearby the filament channel before the flares. The jet, originating from the first flare during its rise phase, not only hit the filament body but also met one of the ends of the loops. The filament then underwent an inclined eruption followed by the second flare and met the same loop end once more. Both the jet and the filament erup- tion were accompanied by the development of loop disturbances and the appearances of brightenings around the meeting site. In particular, the erupting filament showed clear manifestations of interactions with the loops. After a short holdup, only its portion passed through this site, while the other portion remained at the same place. Following the fila-ment eruption and the loop disappearance, four dimmings were formed and located near their four ends. This is a situation that we define as "quadrupolar dimmings." It appears that the two flares consisted of a sympathetic pair physically linked by the interaction between the jet and the filament, and their sympathy indicated that of the two CMEs.Moreover, it is very likely that the two sympathetic CMEs were simultaneously associ-ated with the disappearing loops and the quadrupole dimmings. 相似文献
12.
Based on our previous works regarding solar eruptions, we focus on the relationships among different eruptive phenomena, such
as solar flares, eruptive prominences and coronal mass ejections (CMEs). The three processes show clear correlations under
certain circumstances. The correlation between a CME and solar flare depends the energy that stored in the relevant magnetic
structure, which is available to drive the eruption: the more energy that is stored, the better the correlation is; otherwise,
the correlation is poor. The correlation between a CME and eruptive prominence, on the other hand, depends on the plasma mass
concentration in the configuration prior to the eruption: if the mass concentration is significant, a CME starts with an eruptive
prominence, otherwise, a CME develops an without an apparent associated eruptive prominence. These results confirm that solar
flares, eruptive prominences and CMEs are different significances of a single physical process that is related to the energy
release in a disrupted coronal magnetic field. The impact of gravity on CME propagation and the above correlations is also
investigated. Our calculations indicate that the effect of gravity is not significant unless the strength of the background
field in the disrupted magnetic configuration becomes weak, say weaker than 30 G. 相似文献
13.
S. Bravo 《Solar physics》1995,161(1):57-65
The observation of non-corotating shock fronts in interplanetary space is always associated with the previous occurrence of a coronal mass ejection (CME), which is frequently accompanied by a flare or a prominence eruption. When looking at the solar region of origin of these events, a coronal hole is always found. Here we propose a scenario at the Sun where all these related events can find a place. 相似文献
14.
S. T. WU T. X. Zhang E. Tandberg-Hanssen Yang Liu Xueshang Feng Arjun Tan 《Solar physics》2004,225(1):157-175
Analysis of observations from both space-borne (LASCO/SOHO, Skylab and Solar Maximum Mission) and ground-based (Mauna Loa Observatory) instruments show that there are two types of coronal mass ejections (CMEs), fast CMEs and slow CMEs. Fast CMEs start with a high initial speed, which remains more or less constant, while slow CMEs start with a low initial speed, but show a gradual acceleration. To explain the difference between the two types of CMEs, Low and Zhang (2002) proposed that it resulted from a difference in the initial topology of the magnetic fields associated with the underlying quiescent prominences, i.e., a normal prominence configuration will lead to a fast CME, while an inverse quiescent prominence results in a slow CME. In this paper we explore a different scenario to explain the existence of fast and slow CMEs. Postulating only an inverse topology for the quiescent prominences, we show that fast and slow CMEs result from different physical processes responsible for the destabilization of the coronal magnetic field and for the initiation and launching of the CME. We use a 2.5-D, time-dependent streamer and flux-rope magnetohydrodynamic (MHD) model (Wu and Guo, 1997) and investigate three initiation processes, viz. (1) injecting of magnetic flux into the flux-rope, thereby causing an additional Lorentz force that will destabilize the streamer and launch a CME (Wu et al., 1997, 1999); (2) draining of plasma from the flux-rope and triggering a magnetic buoyancy force that causes the flux-rope to lift and launch a CME; and (3) introducing additional heating into the flux-rope, thereby simulating an active-region flux-rope accompanied by a flare to launch a CME. We present 12 numerical tests using these three driving mechanisms either alone or in various combinations. The results show that both fast and slow CMEs can be obtained from an inverse prominence configuration subjected to one or more of these three different initiation processes. 相似文献
15.
E. Palmerio E. K. J. Kilpua A. W. James L. M. Green J. Pomoell A. Isavnin G. Valori 《Solar physics》2017,292(2):39
A key aim in space weather research is to be able to use remote-sensing observations of the solar atmosphere to extend the lead time of predicting the geoeffectiveness of a coronal mass ejection (CME). In order to achieve this, the magnetic structure of the CME as it leaves the Sun must be known. In this article we address this issue by developing a method to determine the intrinsic flux rope type of a CME solely from solar disk observations. We use several well-known proxies for the magnetic helicity sign, the axis orientation, and the axial magnetic field direction to predict the magnetic structure of the interplanetary flux rope. We present two case studies: the 2 June 2011 and the 14 June 2012 CMEs. Both of these events erupted from an active region, and despite having clear in situ counterparts, their eruption characteristics were relatively complex. The first event was associated with an active region filament that erupted in two stages, while for the other event the eruption originated from a relatively high coronal altitude and the source region did not feature a filament. Our magnetic helicity sign proxies include the analysis of magnetic tongues, soft X-ray and/or extreme-ultraviolet sigmoids, coronal arcade skew, filament emission and absorption threads, and filament rotation. Since the inclination of the post-eruption arcades was not clear, we use the tilt of the polarity inversion line to determine the flux rope axis orientation and coronal dimmings to determine the flux rope footpoints, and therefore, the direction of the axial magnetic field. The comparison of the estimated intrinsic flux rope structure to in situ observations at the Lagrangian point L1 indicated a good agreement with the predictions. Our results highlight the flux rope type determination techniques that are particularly useful for active region eruptions, where most geoeffective CMEs originate. 相似文献
16.
Syed Salman Ali Wahab Uddin Ramesh Chandra 《Journal of Astrophysics and Astronomy》2006,27(2-3):347-352
Here we present a preliminary analysis of a helical eruptive prominence at the east limb of the Sun on 21 April 2001. Unusually
this eruption is associated with a double CME. We have tried to study the morphology of the event, energy budget of the prominence
and associated CMEs. Our analysis shows that the prominence and first CME started simultaneously from the limb and prominence
carries sufficient energy to feed both the CMEs. Moreover, it is also concluded that CMEs are magnetically driven and internally
powered. 相似文献
17.
Simultaneous SOHO and Ground-Based Observations of a Large Eruptive Prominence and Coronal Mass Ejection 总被引：1，自引：0，他引：1
Plunkett S.P. Vourlidas A. Šimberová S. Karlický M. Kotrč P. Heinzel P. Kupryakov Yu.A. Guo W.P. Wu S.T. 《Solar physics》2000,194(2):371-391
Coronal mass ejections (CMEs) are frequently associated with erupting prominences near the solar surface. A spectacular eruption of the southern polar crown prominence was observed on 2 June 1998, accompanied by a CME that was well-observed by the LASCO coronagraphs on SOHO. The prominence was observed in its quiescent state and was followed throughout its eruption by the SOHO EIT and later by LASCO as the bright, twisted core of the CME. Ground-based H observations of the prominence were obtained at the Ondejov Observatory in the Czech Republic. A great deal of fine structure was observed within the prominence as it erupted. The prominence motion was found to rotate about its axis as it moved outward. The CME contained a helical structure that is consistent with the ejection of a magnetic flux rope from the Sun. Similar structures have been observed by LASCO in many other CMEs. The relationship of the flux rope to other structures in the CME is often not clear. In this event, the prominence clearly lies near the trailing edge of the structure identified as a flux rope. This structure can be observed from the onset of the CME in the low corona all the way out to the edge of the LASCO field of view. The initiation and evolution of the CME are modeled using a fully self-consistent, 3D axisymmetric, MHD code. 相似文献
18.
观测研究表明有利于磁重联的新浮磁流与日冕物质抛射(CME)有密切关系．利用数值模拟的方法,新浮磁流触发CME的物理模型对观测结果进行了物理解释．基于这种模型,不考虑重力和热传导, 2．5维的数值模拟的理论结果显示:是否能够触发暗条爆发及CME,取决于新浮磁流磁通量的大小、浮现的位置以及其磁极走向,并给出了能够触发暗条爆发与不能触发爆发的参数空间．利用2002年和2003年的15个暗条爆发事例以及2002年的44个非爆发事例,对新浮磁流磁通量的大小、浮现的位置以及磁极走向进行了统计研究．结果表明并非所有的新浮磁流都能够使暗条失去平衡,形成CME．统计结果基本上支持了数值模拟的理论结果．这个结果可为空间天气预报研究提供有用的参考信息． 相似文献
19.
The source regions of solar coronal mass ejections 总被引：1，自引：0，他引：1
Richard A. Harrison 《Solar physics》1990,126(1):185-193
Knowledge of the origin of the solar coronal mass ejection (CME) may be crucial to our understanding of several active solar phenomena, such as flares, as well as to the structure and stability of the corona and the prediction of interplanetary disturbances. In recent years, two camps of opinion have emerged, based on the belief that CMEs either commonly originate from structures intimately linked to active regions or they originate from coronal hole regions. This present study investigates the locations of 95 CME events observed during 1984–1986 relative to coronal hole and active region features. We find no evidence to support the coronal hole hypothesis and many indications that active regions are indeed associated with the source regions of CMEs. 相似文献
20.
L. A. Bone L. van Driel-Gesztelyi J. L. Culhane G. Aulanier P. Liewer 《Solar physics》2009,259(1-2):31-47
We report observations of the formation of two filaments?–?one active and one quiescent, and their subsequent interactions prior to eruption. The active region filament appeared on 17 May 2007, followed by the quiescent filament about 24 hours later. In the 26 hour interval preceding the eruption, which occurred at around 12:50 UT on 19 May 2007, we see the two filaments attempting to merge and filament material is repeatedly heated suggesting magnetic reconnection. The filament structure is observed to become increasingly dynamic preceding the eruption with two small hard X-ray sources seen close to the active part of the filament at around 01:38 UT on 19 May 2007 during one of the activity episodes. The final eruption on 19 May at about 12:51 UT involves a complex CME structure, a flare and a coronal wave. A magnetic cloud is observed near Earth by the STEREO-B and WIND spacecraft about 2.7 days later. Here we describe the behaviour of the two filaments in the period prior to the eruption and assess the nature of their dynamic interactions. 相似文献