共查询到20条相似文献，搜索用时 953 毫秒
1.
2.
Rail tracks undergo degradation owing to particle breakage and fouling of ballast by various fines including coal and subgrade soil. As the ballast becomes fouled, its strength and drainage capacity are compromised, sometimes resulting in differential settlement and reduced track stability. This paper demonstrates a continuum mechanics based framework to evaluate the detrimental effect of fines on the strength, deformation and degradation of coal-fouled ballast under monotonic loading. An elastoplastic constitutive model that considers the effect of fines content and energy consumption associated with particle breakage during shearing is presented. This multiphase constitutive model is developed within a critical state framework based on a kinematic-type yield locus and a modified stress-dilatancy approach. A general formulation for the rate of ballast breakage and coal particle breakage during triaxial shearing is presented and incorporated into the plastic flow rule to accurately predict the stress–strain response of coal-fouled ballast at various confining pressures. The behaviour of ballast at various levels of fouling is analysed and validated by experimental data. 相似文献
3.
Repetitive or cyclic rail loading deteriorates the engineering properties of the railway ballast by particle crushing and rearrangement. Most of the classical elasto-plastic models are unable to predict such ballast degradation despite successfully predicting the overall load–deformation behavior during cyclic densification. In this context, the present study delivers a novel hypo-plastic modeling approach coupled with breakage mechanics theory to bridge the gap of the conventional models. The hypo-plastic approach enables to predict the nonlinear load–deformation response of ballast-type granular materials for both monotonic and cyclic loading conditions, while circumventing the requirement of notional yield condition to predict the inelastic behavior. Breakage mechanics theory, on the other hand, establishes the links between particle comminution and the macroscopic deformation. The novelty of the proposed approach is threefold. Firstly, unlike the conventional hypo-plastic approaches, the development of the proposed model is within the continuum thermodynamics framework. Secondly, the model requires less number of physically identifiable parameters as compared to that of earlier models employed for assessing the particle breakage under cyclic loading. Third and finally, the numerical implementation of the model as a user-defined material is simple for solving boundary value problems. Under the compressive deformation regime, the model prediction of the ballast degradation along with the cyclic densification response agrees reasonably well with the experimental results found in the literature. 相似文献
4.
粗粒土的破碎耗能计算及影响因素 总被引：2，自引：1，他引：1
粗粒土的颗粒破碎直接改变了土体本身结构,对粗粒土的剪胀和内摩擦角都会产生影响。在土体剪切过程中,体积应力和剪切应力在体积应变和剪切应变上做功,这部分能量在剪切过程中转化为颗粒的弹性储能、颗粒间的摩擦耗能、颗粒剪胀时对外做功和颗粒破碎耗能4部分。准确计算剪切过程中粗粒土破碎耗能的目的是：从能量角度分析颗粒破碎对土体本构关系的影响,为建立考虑颗粒破碎的粗粒土本构关系创造条件。通过分析粗粒土的常规三轴试验数据,计算得到了剪切过程中的粗粒土破碎耗能。计算结果表明,常规三轴试验条件下粗粒土破碎耗能主要受固结应力、土体摩擦系数M等因素的影响。 相似文献
5.
This article presents a fundamental study on the role of particle breakage on the shear behavior of granular soils using the three‐dimensional (3‐D) discrete element method. The effects of particle breakage on the stress ratio, volumetric strain, plastic deformation, and shear failure behavior of dense crushable specimens undergoing plane strain shearing conditions are thoroughly investigated through a variety of micromechanical analyses and mechanism demonstrations. The simulation of a granular specimen is based on the effective modeling of realistic fracture behavior of single soil particles, which is demonstrated by the qualitative agreement between the results from platen compression simulations and those from physical laboratory tests. The simulation results show that the major effects of particle breakage include the reduction of volumetric dilation and peak stress ratio and more importantly the plastic deformation mechanisms and the shear failure modes vary as a function of soil crushability. Consistent macro‐ and micromechanical evidence demonstrates that shear banding and massive volumetric contraction depict the two end failure modes of a dense specimen, which is dominated by particle rearrangement–induced dilation and particle crushing–induced compression, respectively, with a more general case being the combination and competition of the two failure modes in the medium range of soil crushability and confining stress. However, it is further shown that a highly crushable specimen will eventually develop a shear band at a large strain because of the continuous decay of particle breakage. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
6.
运用80 t大型三维接触面试验机,对不同法向刚度下粗粒土与结构接触面三维静动力学特性进行了试验研究,重点分析了法向刚度对接触面力学特性的影响规律。法向常刚度条件下,接触面在单调剪切时均先剪缩再剪胀、法向应力先减小后增大;循环剪切时接触面不可逆性剪切体变呈单调增长、可逆性剪切体变峰值逐渐减小后趋于稳定,切向应力峰值不断减小,抗剪强度逐渐减小,主应力比峰值则基本保持不变。法向刚度主要影响剪切体变、可逆性剪切体变、切向应力、主剪应力等接触面力学性能参数的大小;法向刚度越大,单调剪切时法向应力变化越大、切向应力峰值越大、剪缩和剪胀量越小;循环剪切时不可逆性剪切体变增长越慢、最终值越小,抗剪强度减小越快、达到0时对应的循环周次越少。法向刚度对剪切体变、可逆性剪切体变、主剪应力、主应力比等性能参数与切向位移的关系形式及接触面摩擦角基本没有影响。 相似文献
7.
Simulation of cyclic strength degradation of natural clays via bounding surface model with hybrid flow rule 
下载免费PDF全文
下载免费PDF全文 Strength loss of natural clays subjected to seismic loading is a critical factor contributing to earthquake‐induced ground failure and associated hazards. This work proposes a bounding surface constitutive law to simulate cyclic strength degradation of natural clays resulting from the loss of structure and attendant accumulation of excess pore pressures. The proposed model employs an enhanced plastic flow rule that can simulate accurately the development of pore pressure and explicitly incorporates soil structure effects. The validation of the model with reference to the experimental evidence available for 3 structured clays shows that with a single set of parameters the proposed model can reasonably represent the mechanical behavior of natural clays under various loading conditions (1D compression, monotonic shearing in compression and extension, cyclic loading, and postcyclic shearing). Particularly, its satisfactory performance in terms of quantification of cyclic strength degradation encourages the use of the model in simulating boundary value problems related to the stability of geotechnical facilities under earthquakes. 相似文献
8.
An elasto-plastic model is proposed for modeling the constitutive behavior of the interface between gravelly soils and structural materials. This model is based on the two-surface plasticity formulation and it is compatible with the concept of critical state soil mechanics. The model requires the same set of eight calibration parameters for predicting the monotonic and cyclic responses of both loose and dense interfaces. The model simulates cyclic densification, shear degradation and the effects of normal pressure, soil density, and stress path. The performance of the proposed constitutive model is validated by tests data under different normal stresses and boundary conditions. 相似文献
9.
10.
颗粒破碎是粒状材料在高应力状态下的一种基本现象。为了研究冻结砂土中颗粒破碎对应力应变关系的影响,将冻结砂土视为复合颗粒材料,忽略冰的压融,考虑内摩擦角随应力状态的变化,构建一个适用于冻结砂土的考虑颗粒破碎的非线性本构模型。构建过程分为三步,首先是基于三轴剪切前后颗粒分析对冻结砂土颗粒破碎模式和产生机理进行探讨;其次是基于考虑颗粒破碎的能量平衡方程,对冻土在三轴剪切试验过程中的颗粒破碎耗能进行分析,结果表明颗粒破碎耗能随轴向应变呈双曲线变化趋势;最后应用考虑颗粒破碎的剪胀方程修正沈珠江三参数非线性模型中的体积切线模量νt,得到一个考虑颗粒破碎的非线性本构模型,模型参数可以通过单轴压缩试验和常规三轴试验确定。将原模型和修正后模型的计算结果与控制温度为-6℃,围压为1 MPa、4 MPa、6 MPa、8 MPa和10 MPa时冻结砂土的试验结果进行对比,结果表明该模型能够较好的模拟冻结砂土从低围压到高围压的应变软化特征与剪胀特征。 相似文献
11.
This paper describes a modified elasto‐plasticity damage model to capture monotonic and cyclic behavior of the interface between a geotextile and gravelly soil. New damage variable and shear strength criterion are introduced on the basis of test observations. The formulations of the modified model are obtained by extending those of the original interface model. The model parameters with physical meaning are easily determined from a group of cyclic shear tests and a confining compression test. The model predictions are compared with the results of a series of direct shear tests and large‐scale pullout tests. The comparison results demonstrate that the model accurately describes the monotonic and cyclic stress–strain relationship of the interface between a geotextile and gravelly soil while capturing new characteristics: (1) the strength that is nonlinearly dependent on the normal stress; (2) significant shear strain‐softening; (3) the comprehensive volumetric strain response with dependency on the shear direction; and (4) the evolution of behavior associated with the changes in the physical state that includes the geotextile damage. This model is used in a finite element analysis of pullout tests, indicating that the tensile modulus of a geotextile has a significant effect on the response of the geotextile–gravel system. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
12.
The stress–dilatancy relation is of critical importance for constitutive modelling of geomaterial. A novel fractional-order stress–dilatancy equation had been developed for granular soil, where a nonlinear stress–dilatancy response was always predicted. However, it was experimentally observed that after a certain extent of shearing, an almost linear response between the stress ratio and the dilatancy ratio, rather than the nonlinear response, usually existed. To capture such stress–dilatancy behaviour, a new fractional stress–dilatancy model is developed in this study, where an apparent linear response of the stress–dilatancy behaviour of soil after sufficient shearing is obtained via analytical solution. As the fractional order varies, the derived stress–dilatancy curve and the associated phase transformation state stress ratio keep changing. But, unlike existing researches, no other specific parameters, except the parameter related to fractional order, concerning such shift are required. Then, the developed stress–dilatancy model is applied to constitutive modelling of granular soil and soil–structure interface, for further validation. A series of test results of different granular soils and soil–structure interfaces under different loading conditions are simulated and compared, where a good model performance is observed.
相似文献13.
夹有泥皮粗粒土与结构接触面力学特性试验研究 总被引：3，自引：0，他引：3
进行了粗粒土与结构之间夹有泥皮和无泥皮两种状态的接触面单调和循环剪切试验,初步研究了夹有泥皮时接触面静动力学特性的规律和作用机理。试验表明,泥皮对粗粒土与结构接触面的力学特性有重要影响。当泥皮不厚时,接触面仍表现出粗粒土与结构接触面的基本力学特性。泥皮越厚,接触面的抗剪强度越低,相对法向位移会越大。当泥皮极厚时,泥皮将隔断粗粒土与结构面的接触而成为泥皮与结构接触面。泥皮对接触面力学特性的影响程度不仅与泥皮本身的特性及其厚度有关,还与构成接触面的结构面材料与粗粒土的特性有关。 相似文献
14.
The shear behavior at the interface between the soil and a structure is investigated at the macroscale and particle‐scale levels using a 3‐dimensional discrete element method (DEM). The macroscopic mechanical properties and microscopic quantities affected by the normalized interface roughness and the loading parameters are analyzed. The macro‐response shows that the shear strength of the interface increases as the normalized roughness of the interface increases, and stress softening and dilatancy of the soil material are observed in the tests that feature rough interfaces. The particle‐scale analysis illustrates that a localized band characterized by intense shear deformation emerges from the contact plane and gradually expands as shearing progresses before stabilizing at the residual stress state. The thickness of the localized band is affected by the normalized roughness of the interface and the normal stress, which ranges between 4 and 5 times that of the median grain diameter. A thicker localized band is formed when the soil has a rough shearing interface. After the localized band appears, the granular material structuralizes into 2 regions: the interface zone and the upper zone. The mechanical behavior in the interface zone is representative of the interface according to the local average stress analysis. Certain microscopic quantities in the interface zone are analyzed, including the coordination number and the material fabric. Shear at the interface creates an anisotropic material fabric and leads to the rotation of the major principal stress. 相似文献
15.
16.
土与土工织物接触面力学特性的试验研究 总被引：13，自引：3，他引：10
在大型土与结构接触面循环加载剪切仪上添加了拉拔试验模块,进行了大尺寸的粗粒土与土工布接触面的单调和往返剪切试验以及土工布拉拔试验。剪切试验结果表明,粗粒土与土工布接触面出现了一定程度的应变软化,相对法向位移的变化受法向应力影响很大,并表现出异向性。土工布拉拔试验结果表明,由于土与土工织物接触面的剪胀造成该类接触面的抗剪强度与法向应力不再是线性关系;将接触面剪切试验和拉拔试验方法结合起来是研究土与土工织物接触面力学特性较为全面和合理的手段。 相似文献
17.
颗粒破碎对于粗粒土的应力变形性质有显著影响。在Rowe剪胀方程的基础上考虑颗粒破碎耗能的影响,并引入颗粒破碎的演化规律对颗粒破碎耗能进行计算,得到了一个简单实用且对粗粒土适用性较好的剪胀方程。主要结论如下：（1）通过粗粒土的三轴CD试验结果分析并证明了弹性应变对于剪胀比的影响较小,因此,可以将剪胀比 表示为 ,进而得到了剪胀方程表达式的一般形式。（2）将剪胀方程中的临界状态应力比Mc折减为摩擦系数M,并引入了颗粒破碎的演化规律,将M定量表示为广义剪应变的函数,从而使得所计算的破碎耗能在剪切过程中是递增的,且逐渐趋于稳定值,符合了颗粒破碎不可逆的规律。（3）试验表明,剪胀方程中的未知量 与摩擦系数M之间呈现显著的线性关系,将该关系代入剪胀方程即确定了方程的具体表达形式,并且利用堆石料的三轴CD试验证明了其对粗粒土的剪胀性预测效果较好。 相似文献
18.
紫坪铺面板坝堆石料颗粒破碎试验研究 总被引：2，自引：0，他引：2
采用大型三轴仪对紫坪铺面板坝堆石料进行了单调和循环荷载下的固结排水剪切试验,研究了不同孔隙比情况下颗粒破碎及剪胀的变化规律。试验表明：（1）单调和循环荷载条件下,堆石料颗粒破碎率与塑性功之间存在一致的双曲线关系;（2）峰值应力处剪胀率与颗粒破碎率在半对数坐标中呈近似线性关系;（3）峰值应力处主应力比与相应的剪胀率呈近似线性关系,且上述结果受初始孔隙比的影响不大。研究成果有助于进一步了解堆石料的颗粒破碎特点,对建立复杂应力条件下考虑颗粒破碎和状态相关性的弹塑性本构模型,分析紫坪铺面板堆石坝汶川地震破损机制是十分有益的。 相似文献
19.
A practical combined finite–discrete element method was developed to simulate the breakage of irregularly shaped particles in granular geomaterials, e.g., rockfill. Using this method, each particle is discretized into a finite element mesh. The potential fracture paths are represented by pre-inserted cohesive interface elements (CIEs) with a progressive damage model. The Mohr–Coulomb model with a tension cut-off is employed as the damage initiation criterion to rupture the predominant failure mode occurs at the particle scale. Two series of biaxial tests were simulated for both the breakable and unbreakable particle assemblies. The two assemblies have identical configurations, with the exception that the former is inserted with CIEs and is breakable. The simulated stress–strain–dilation responses obtained for both assemblies are in agreement with experimental observations. We present a comprehensive study of the role of particle breakage on the mechanical behavior of rockfill materials at both the macroscopic and microscopic scales. The underlying mechanism of particle breakage can be explained by the force chain in the assemblies. 相似文献
20.
This paper presents a micromechanical model for the analysis of wet granular soils at low saturation (below 30%). The discrete element method is employed to model the solid particles. The capillary water is assumed to be in a pendular state and thus exists in the form of liquid bridges at the particle‐to‐particle contacts. The resulting inter‐particle adhesion is accounted for using the toroidal approximation of the bridge. Hydraulic hysteresis is accounted for based on the possible mechanism of the formation and breakage of the liquid bridges during wetting and drying phases. Shear test computational simulations were conducted at different water contents under relatively low net normal stresses. The results of these simulations suggest that capillary‐induced attractive forces and hydraulic hysteresis play an important role in affecting the shear strength of the soil. These attractive forces produce a tensile stress that contributes to the apparent cohesion of the soil and increases its stiffness. During a drying phase, capillary‐induced tensile stresses, and hence shear strength, tend to be larger than those during a wetting phase. The proposed model appears to capture the macroscopic response of wet granular materials and revealed a number of salient micromechanical mechanisms and response patterns consistent with theoretical considerations. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献