共查询到20条相似文献，搜索用时 93 毫秒
1.
The behavior of a partially saturated soil during surface‐water infiltration is analyzed by means of an elasto‐plastic constitutive model formulated in terms of effective stress and extended to unsaturated conditions. The model is calibrated considering laboratory‐scale experimental results under suction‐controlled conditions. The wetting process in two collapsing soils, initially loaded at in situ stresses, is simulated by imposing two different boundary conditions: surface ponding and water flow. The stress paths resulting from the imbibition process are analyzed at different points inside the layer. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
2.
The purpose of this study is to estimate and compare suction stress between sand and silt sampled from the coast of Korea. The water content and matric suction of sand (Joomunjin) and silt (Saemangeum) were first examined using an automated soil–water characteristic curve (SWCC) apparatus based on the axis translation technique. SWCCs were then estimated from the test results using the van Genuchten (1980) model. At equal matric suction, the corresponding water content of silt was higher than that of sand. Moreover, the saturated water content and air-entry value (AEV) of silt were larger than those of sand. Using the fitting SWCC parameters, suction stress characteristic curves (SSCCs) were estimated according to the method proposed by Lu and Likos (2006). The SSCC behavior for sand and silt was different and significantly depended on the material properties, particularly pore size and pore size distribution. For sand, the suction stress exhibited rapid variation with changes in matric suction, but for silt, the suction stress approached a constant value as the matric suction increased. In addition, when the matric suction was smaller than the AEV of soil, the suction stress was equal to the magnitude of the matric suction. In contrast, when the matric suction exceeded the AEV of soil, suction stress had a nonlinear shape with respect to the matric suction. 相似文献
3.
A kinematic hardening mechanism has previously been proposed to capture the behavior of soil during large stress reversals in the triaxial plane. This mechanism is now extended to the principal stress space. It incorporates rotation and intersection of yield surfaces to achieve a consistent and physically rational fit with experimentally observed soil behavior during large three‐dimensional stress reversals. An existing elasto‐plastic model with isotropic hardening is used as the basic framework to which the rotational kinematic hardening mechanism has been added. The new combined model preserves the behavior of the isotropic hardening model under monotonic loading conditions, and the extension from isotropic to rotational kinematic hardening under three‐dimensional conditions is accomplished without introducing new material parameters. The framework of the model is presented here with some comparisons between theoretical and experimental directions of strain increment vectors to indicate the potential of the model. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
4.
This paper involves an evaluation of a relationship describing the evolution in yield stress of unsaturated soils during hydraulic hysteresis, and an application of this relationship in an elasto-plastic framework to predict the compression curves of unsaturated soils under drained (free outflow of air and water with constant suction) or undrained (constant water content with no outflow of water and varying suction) conditions. The yield stress was quantified as the apparent mean effective preconsolidation stress obtained from compression tests reported in the literature on specimens that had experienced different hydraulic paths. It was observed that the preconsolidation stress does not follow a hysteretic path when plotted as a function of matric suction, but does when plotted as a function of the degree of saturation. Accordingly, an existing logarithmic relationship between the preconsolidation stress and matric suction normalized by the air entry suction was found to match the experimental preconsolidation stress results. This same relationship was also able to satisfactorily predict the trends in preconsolidation stress with degree of saturation by substituting the hysteretic soil–water retention curve (SWRC) into the place of the matric suction. The relationship between preconsolidation stress and suction was combined with an elasto-plastic framework to predict the compression curves of soils during drained compression, while the wetting-path relationship between preconsolidation stress and degree of saturation was combined with the framework to predict the compression curves of soils during undrained (constant water content) compression. A good match was obtained with experimental data from the literature, indicating the relevance of considering the hysteretic SWRC and preconsolidation relationships when simulating the behavior of unsaturated soils following different hydro-mechanical paths. 相似文献
5.
Jianjun Ma 《Rock Mechanics and Rock Engineering》2016,49(2):455-465
A unified elastoplastic model for describing the stress–strain behavior of partially saturated collapsible rocks is proposed. The elastic–plastic response due to loading and unloading is captured using bounding surface plasticity. The coupling effect of hydraulic and mechanical responses is addressed by applying the effective stress concept. Special attention is paid to the rock–fluid characteristic curve (RFCC), effective stress parameter, and suction hardening. A wide range of saturation degree is considered. The characteristics of mechanical behavior in partially saturated collapsible rocks are captured for all cases considered. 相似文献
6.
在对人工制备结构性土样等应力比压缩试验结果分析基础上,确定出结构性土体初始屈服面形状和土体初始屈服后塑性应变增量的方向,推导出结构性土体屈服函数的表达式;硬化参数采用塑性功的函数,根据三轴排水剪切试验结果确定出土体的硬化规律。由此构建能反映土体结构性的弹塑性硬化本构模型,并用试验进行了验证。本文提出一种基于试验的建模方法,不依赖经典塑性力学理论的正交流动规则,并建立可考虑土体结构性影响的本构模型,对土体结构性研究具有借鉴意义。 相似文献
7.
以三峡库区黄土坡滑坡临江I号崩滑体的滑带土为研究对象,研究基质吸力对非饱和滑带土的强度与变形等力学性质的影响。利用GDS非饱和反压直剪仪对滑带土进行了不同净法向应力和基质吸力组合下的直剪试验。试验结果表明:相同的基质吸力作用下,滑带土抗剪强度随着净法向应力的增大而增大。当滑带土试样中基质吸力较小时(50kPa),试样剪切过程中的应力-应变曲线,随着净法向应力的增大表现为应变硬化型。之后随着基质吸力的增加,当吸力大于净法向应力时,剪切应力-应变曲线表现为较明显的达到峰值后软化。反之,应力-应变曲线表现为应变硬化型。相同净法向应力下,抗剪强度随着吸力的增大而增大,剪切应力-应变曲线由低法向应力下的达到峰值后软化向高法向应力下的应变硬化转变。剪切过程的轴向位移表现为:当吸力大于净法向应力时,表现为剪胀; 反之,表现为剪缩。滑带土固结排水剪切条件下得到的黏聚力随着基质吸力呈线性增长关系。得到了滑带土的吸力摩擦角b为13.7,有效内摩擦角有较小增长,平均有效内摩擦角15.9。 相似文献
8.
This paper presents an advanced thermomechanical model – TEAM in the framework of two‐surface plasticity for saturated clays, with emphasis put on some important thermomechanical features of natural clays evidenced experimentally such as the limited thermomechanical elastic zone, the smooth transition from elastic to plastic behavior. Two plastic mechanisms are introduced in the model: one is to reproduce the thermoplasticity involving thermal expansion and contraction observed at high over‐consolidation ratios and the second one describes the temperature effect on the yield behavior. The model adopts additional yield surfaces, namely inner yield surfaces that are associated with the two proposed plastic mechanisms to account for the plastic behavior inside the existing conventional thermomechanical yield surface namely yield surfaces. The general expressions of the yield surfaces and plastic potentials in p′–q–T space are introduced. A progressive plastic hardening mechanism associated with the inner yield surface is defined, enabling the plastic modulus to vary smoothly during thermomechanical loadings inside the yield surfaces. Several tests on natural Boom clay along different thermomechanical loading paths have been simulated by TEAM, and results show its relevance in describing the thermomechanical behavior of saturated clays. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
9.
应力路径对土的强度和变形性质具有重要影响。相对于饱和土而言,控制吸力条件下的非饱和土三轴压缩状态的应力路径研究更加复杂。随着非饱和土本构理论的不断发展,理论和试验研究结果表明,非饱和土弹塑性本构模型可以用来近似地描述非饱和土的强度和变形性质。因而,运用非饱和土弹塑性本构模型对控制吸力条件下的3种非饱和土三轴压缩应力路径试验进行数值模拟是一种有效的理论研究手段。采用Barcelona模型能够对此类试验进行较好的数值模拟,其研究结果表明,在控制吸力条件的三轴压缩状态下应力路径对非饱和土的强度和变形性质具有重要影响。 相似文献
10.
在修正剑桥模型的基础上,提出了一个非饱和土毛细滞回与骨架变形耦合的弹塑性本构模型。该模型考虑了基质吸力与饱和度对屈服应力的影响,可以同时描述非饱和土的弹塑性变形特性与毛细循环滞回效应。根据塑性体变的产生使非饱和土进气值增大的特点,建立了变形对土-水特征曲线影响的数学描述。该模型有效地考虑了饱和度对前期屈服应力的作用,准确地反映了土体在不同土-水状态条件下（脱湿和吸湿过程）强度特性的变化,而且还可以有效地描述水力循环历史对土体变形的影响。通过与试验数据对比,证明了该模型能够模拟非饱和土的主要力学特性。 相似文献
11.
针对非饱和重塑黏土,利用改进的非饱和土静力-动力液压三轴-扭转多功能剪切仪,在固结排水（CD）条件下进行了应力控制式分级加载的循环三轴试验,通过对试验结果的对比分析,探讨了初始固结压力和基质吸力(孔隙气压力Ua与孔隙水压力Uw之差)对非饱和土动应力-动应变关系特性的影响。以此为基础,将Hardin-Drnerich等价黏弹性模型和Masing加卸载准则进行了改进,并得到了可以考虑基质吸力的非饱和黏土的等价黏弹性模型。进而对试验数据与模型预测结果进行比较,结果表明这种改进的非饱和土等价黏弹性模型能较好预测各种基质吸力下非饱和土的动应力-动应变关系。 相似文献
12.
A two-surface plasticity model for stiff clay 总被引：1，自引：1，他引：0
This paper presents a constitutive model for describing some important features of the behavior of natural stiff clay evidenced experimentally such as the limited elastic zone, the presence of strain hardening and softening, and the smooth transition from elastic behavior to a plastic one. The model, namely ACC-2, is an adapted Modified Cam Clay model with two yield surfaces: similarly to bounding surface plasticity theory, an additional yield surface—namely Inner yield surface—was adopted to account for the plastic behavior inside the conventional yield surface. A progressive plastic hardening mechanism was introduced with a combined volumetric-deviatoric hardening law associated with the Inner yield surface, enabling the plastic modulus to vary smoothly during loading paths. The main feature of the proposed model is that its constitutive equations can be simply formulated based on the consistency condition for the Inner yield surface, so that it can be efficiently implemented in a finite element code using a stress integration scheme similar to that of the Modified Cam Clay model. Furthermore, it is proved to be an appropriate model for natural stiff clay: the simulations of a set of tests along different mechanical loading paths on natural Boom Clay show good agreement with the experimental results. 相似文献
13.
Vegetation contributes to weak soil stabilisation through reinforcement of the soil, dissipation of excess pore pressure and increasing the shear strength by induced matric suction. This paper describes the way vegetation influences soil matric suction, shrinkage and ground settlement in the vadose zone through transpiration. A mathematical model for the rate of root water uptake, including the root growth rate considering ground conditions, type of vegetation and climatic parameters, has been developed. A finite element approach is employed to solve the transient coupled flow-deformation equations. The finite element mesh is built using partially saturated soil elements capable of representing the salient aspects of unsaturated permeability and the soil water characteristic curve. The model formulation is based on the effective stress theory of unsaturated soils. Based on this proposed model, the distribution of the ground matric suction profile adjacent to the tree is numerically analysed. Current field measurements of soil matric suction and moisture content collected from Miram site located in Victoria State, Australia by the authors are compared with the numerical predictions. The results indicate that the proposed root water uptake model incorporated in the numerical analysis can be used for prediction of ground properties influenced by tree roots. 相似文献
14.
15.
Generalization of soil–structure interface models from dry/saturated states to consider partially saturated states is studied in this paper. For this purpose, basic constitutive equations of a conventional elasto-plastic interface model are firstly presented. Then, consideration is given to the effect of partial saturation on definition of effective stress, location of the critical state line as well as the impact of interface state on plastic hardening modulus and dilatancy. For each concern, proper independent approaches together with associated constitutive equations are discussed to be included in the basic model as complementary ingredients. Among many different possibilities to combine complementary constitutive equations for effective stress, relocation of the critical state line with degree of saturation, and impact of the interface state on plastic hardening modulus and dilatancy, six essential cases are selected. Evaluations show that all six cases can realistically consider the impact of partial degree of saturation on the peak and residual shear strengths as well as the volume change behavior of unsaturated interfaces. 相似文献
16.
This paper deals with the numerical implementation of a cap model for unsaturated soils. It provides a brief review of existing cap model approaches, based on which an improved model formulated in terms of generalised effective stress and matric suction is derived and described in detail. Although the proposed model is a multisurface plasticity model, it can efficiently be implemented using only single‐surface projections because of the smoothness of the model, which is obtained by construction. Numerical algorithms are provided for these single‐surface stress projections, using a single‐equation approach whenever possible. The robustness of the utilised single‐equation approaches is enhanced by proposing problem‐fitted start‐up procedures based on investigations of the nonlinear projection equations. A comparison of the model response with extensive material test data is used to validate the model and to demonstrate the robust application of the approach to silty sands and low to medium plasticity clays. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
17.
During several triaxial compression experiments on plastic hardening, softening, and failure properties of dense sand specimens, it was found on various stress paths that the size of the failure surface was not constant. Instead, it changed depending on the current state of hydrostatic pressure. This finding is in contrast to the standard opinion consisting of the fact that the failure surface remains constant, once it has been reached during an experiment or in situ. In general, the behaviour of cohesionless granular‐material‐like sand is somehow characterised in between fluid and solid, where the solid behaviour results from the angle of internal friction and the confining pressure. Although the friction angle is an intrinsic material property, the confining pressure varies with the boundary conditions, thus defining different solid properties like plastic hardening, softening, and also failure. Based on our findings, it was the goal of the present contribution to introduce an improved setting for the plastic strain hardening and softening behaviour including the newly found yield properties at the limit state. For the identification of the material parameters, a complete triaxial experimental analysis of the tested sand is given. The overall elasto‐plasticity concept is validated by numerical computations of several laboratory foundation‐ and slope‐failure experiments. The performance of the proposed approach is compared with the standard concept of a constant failure surface, where the corresponding yield surfaces are understood as contours of equivalent plastic work or plastic strain. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
18.
在Wheeler本构模型框架的基础上,提出了一个水力与力学耦合的本构模型。该模型中的土-水特征曲线采用毛细滞回内变量模型,能够更好地描述水力历史变化下毛细滞回现象对非饱和多孔介质变形的影响,同时也可描述非饱和多孔介质变形对渗流的影响。非饱和土的强度不仅与吸力有关,而且受到饱和度的影响。相同的吸力下,土样经过吸湿和脱湿路径的饱和度不同,因此,非饱和土的强度也不同。此模型以体积含水率的塑性变化和体变的塑性变化为硬化参数,不仅能描述基质吸力对非饱和土的强化作用,而且考虑了饱和度对强度及变形的影响。试验结果与模型预测基本吻合,证明该模型能够模拟非饱和土的主要特性。为了简化,此模型是在各向同性荷载下推得的,有待于推广到一般的应力状态 相似文献
19.
The present paper is centred on the assessment of an elastic–plastic model for partially saturated soils, earlier proposed by the authors, for its predictive capability with respect to temperature changes, on the light of available experimental results. The model is cast within a constitutive framework that uses Bishop's stress and suction as main variables governing the volumetric response of the material. Some enhancement to the original temperature‐independent formulation is proposed. In particular, functions describing the yield surface and the compressibility modulus are modified to account for the shrinking of the elastic domain and for the increase of irreversible volumetric strain with heating. Some examples illustrate the main features of the present proposal. Comparison with some experimental results is also included. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
20.
Mohammed Saiful Alam Siddiquee M. S. Islam F. Tatsuoka M. K. Islam 《Geotechnical and Geological Engineering》2018,36(3):1447-1462
Soil is a heterogeneous material and most natural soil deposits show a definite stratification. The mechanical behaviour of such material is generally different in different directions, especially in the direction parallel and perpendicular to the stratification. A series of isotropic compression tests were carried out to study the behavior of granular material produced under controlled stratification in the laboratory. These tests were conducted both on cylindrical and square prismatic tri-axial specimens. It was observed that for hydrostatic loading, the strain response was different in different directions, especially in directions parallel and perpendicular to the direction of soil deposition. A definite trend of anisotropy was observed in the deformation pattern. The observed anisotropy is modeled in this paper by treating soil-dilatancy as a variable quantity. The equation of the plastic potential surface of the model which obeys a non-associated flow rule, is assumed to be dependent on three main variables confining pressure (\(\sigma_{3}\)), void ratio (e) and the angle of bedding plane orientation (δ) during deposition. The angle of bedding plane orientation (δ) was measured with respect to the direction of the major principal stress. The model has a cap yield surface in the isotropic stress direction, which is supplemented by a shear hardening Mohr–Coulomb surface in the deviator direction. This paper focuses on predicting the anisotropic strain response of stratified soil deposits subjected to isotropic compression. The proposed anisotropic model incorporates within an existing strain-hardening sand model, a modified cap yield surface and a modified plastic potential function related to the cap surface, to account for the anistropic response observed in isotropic compression tests. The two dimensional stress–strain model was extended to three dimensional Cartesian space. The strain anisotropy observed in the isotropic compression tests was predicted by the three dimensional anisotropic model proposed for granular materials. 相似文献