首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Bezafibrate (BZF), a widely used lipid regulator, is a potential threat to ecosystems and human health in water, and the recent research showed that advanced oxidation processes (AOPs) are much more effective for BZF degradation. In this study, we investigated the photochemical decomposition of BZF in surface water and effluent from waste water treatment plants (WWTP) by UV/H2O2 process. The results showed that the UV/H2O2 process was a promising method to remove BZF at low concentration, generally at µg L?1 level. When initial concentrations reach 100 µg L?1 in the deionized water, >99.8% of BZF could be removed in 16 min under UV intensity of 61.4 µm cm?2, at the H2O2 concentration of 0.1 mg L?1, and neutral pH condition. Moreover, BZF degradation was inhibited in this process when humic acid (HA) and inorganic solution anions were added to the deionized water solutions, including chloride, nitrate, bicarbonate, and sulfate, significantly. In the surface water and effluent of WWTP, however, the removal efficiency of BZF was lower than that in the deionized water because of the interference of complex constituents in the surface water and effluent. Some main intermediates at the m/z range of 100–400 were observed by high performance LC‐MS (HPLC/MS) and a simple pathway of BZF degradation by UV/H2O2 was proposed.  相似文献   

2.
This research aims at optimizing the effects of processing conditions, salts, natural organic materials, and water matrices quality on the effectiveness of the Fe(II)/K2S2O8/hydroxylamine process in the degradation of pararosaniline. Assisting the Fe(II)/KPS (potassium persulfate) treatment with protonated hydroxylamine (H3NOH+) increases the degradation rate of pararosaniline by more than 100%. Radical scavenger experiments show that the SO4●− radical dominates pararosaniline degradation in the Fe(II)/KPS system, whereas OH is the dominant reactive species in the presence of H3NOH+. The disparity in pararosaniline removal effectiveness upon the Fe(II)/KPS/H3NOH+ and Fe(II)/KPS systems gets more significant with increasing reactants doses (i.e., H3NOH+, H2O2, Fe(II)) and solution pH (2–7). Interestingly, H3NOH+ increased the working pH to 6 instead of pH 4 for the Fe(II)/KPS process. Moreover, mineral anions such as Cl, NO3, NO2, and SO4 (up to 10 × 10−3 m ) do not affect the efficiency of the Fe(II)/KPS/H3NOH+ process. In contrast, acid humic decreases the performance of the process by ≈20%. In natural mineral water, treated wastewater, and river water samples, the Fe(II)/KPS/H3NOH+ process maintains higher degradation performance (≈95%), whereas the process efficiency is greatly amortized in seawater. The efficiency of the Fe(II)/KPS process was drastically decreased in the various water matrices.  相似文献   

3.
The present study employed a modified Fenton system that aims to extend the optimum pH range towards neutral conditions for studying the oxidation of benzene, toluene, ethyl benzene, xylenes (BTEX) using glutamic acid (Glu) as an iron chelator. Addition of 20 mM Glu greatly enhanced the oxidation rate of BTEX in modified Fenton system at pH 5–7. A rapid mass destruction (>97% after 1 h) of BTEX as a water contaminant carried out in the presence of 500 mM H2O2, 10 mM Fe2+, and 20 mM Glu at pH 5 could be shown. The efficiency of this modified Fenton's system for mass destruction of BTEX in contaminated water was measured to estimate the impact of the major process variables that include initial concentrations of soluble Fe, H2O2, Glu (as metal chelating agent), and reaction time.  相似文献   

4.
The decomposition of dichloroacetic acid (DCAA) in water using a UV/H2O2/micro‐aeration process was investigated in this paper. DCAA cannot be removed by UV radiation, H2O2 oxidation or micro‐aeration alone, while UV/H2O2/micro‐aeration combination processes have proved effective and can degrade this compound completely. With initial concentrations of about 110 μg/L, more than 95.1% of DCAA can be removed in 180 min under UV intensity of 1048.7 μW/cm2, H2O2 dosage of 30 mg/L and micro‐aeration flow rate of 2 L/min. However, more than 30 μg/L of DCAA was left after 180 min by UV/H2O2 combination process without micro‐aeration with the same UV intensity and H2O2 dosage. The effects of applied UV radiation intensity, H2O2 dose, initial DCAA concentration and pH on the degradation of DCAA have been examined in this study. Degradation mechanisms of DCAA with hydroxyl radical oxidation have been discussed. The removal rate of DCAA was sensitive to operational parameters. There was a linear relationship between rate constant k and UV intensity and initial H2O2 concentration, which indicated that a higher removal capacity can be achieved by improvement of both factors. A newly found nitrogenous disinfection by‐product (N‐DBP)‐DCAcAm, which has the potential to form DCAA, was easier to remove than DCAA by UV/H2O2 and UV/H2O2/micro‐aeration processes. Finally, a preliminary cost comparison revealed that the UV/H2O2/micro‐aeration process was more cost‐effective than the UV/H2O2 process in the removal of DCAA from drinking water.  相似文献   

5.
Catechol is one of the most abundant phenolic components of olive mill wastewaters. In this article, the mineralization of this compound in synthetic aqueous solutions by the Fenton and photo‐Fenton processes is studied. It has been found that for 1.44 mM catechol, the total organic carbon of solutions is reduced about 94.4% at best after 60 min of Fenton treatment at optimized conditions of pH 3.0, 0.2 mM Fe2+, 7.09 mM H2O2, and 25°C. A faster and overall mineralization is attained by applying photo‐Fenton with UVA irradiation. o‐Benzoquinone, 1,2,3‐trihydroxybenzene and 1,2,4‐trihydroxybenzene were identified by GC–MS as primary quinonic and polyhydroxylated derivatives. Small amounts of generated carboxylic acids like muconic, maleic, malonic, acetic, oxalic, and formic acids were detected by ion‐exclusion chromatography. The Fe(III) complexes of these acids persist in the medium under Fenton conditions, while their photolysis by UVA light and that of other by‐products account for by the faster degradation and total mineralization achieved in the photo‐Fenton process. A reaction sequence for catechol mineralization by Fenton and photo‐Fenton involving all intermediates detected is proposed.  相似文献   

6.
The degradation reactions of two monoazo pigments, namely, Red 53:1 and Red 48:2, by Fenton, photo‐Fenton and UV/H2O2 systems have been studied. The efficiencies of the Fenton reactions increased with temperature, but the formation of solid agglomerates was observed when the reactions were carried out above 50°C indicating a coagulant action of Fe+2 or Fe+3. Photo‐Fenton reactions irradiated by sunlight presented the best rate constants for cleavage of the azo bond and the naphthalene rings. The UV/H2O2 system exhibited the highest efficiency with respect to the consumption of H2O2. The presence of a carbonyl group in the ortho position of the naphthol ring hampered the oxidation of pigment Red 48:2 by hydroxyl radicals. This finding may be explained in terms of the acceptor character of the COOH group, and suggests the formation of a complex containing two six‐membered rings between Fe+3 and the pigment molecule.  相似文献   

7.
The use of the sulphate mass balance (SMB) between precipitation and soil water as a supplementary method to estimate the diffuse recharge rate assumes that the sulphate in soil water originated entirely from atmospheric deposition; however, the origin of sulphate in soil and groundwater is often unclear, especially in loess aquifers. This study analysed the sulphur (δ34S-SO4) and oxygen (δ18O-SO4) isotopes of sulphate in precipitation, water-extractable soil water, and shallow groundwater samples and used these data along with hydrochemical data to determine the sources of sulphate in the thick unsaturated zone and groundwater of a loess aquifer. The results suggest that sulphate in groundwater mainly originated from old precipitation. When precipitation percolates through the unsaturated zone to recharge groundwater, sulphates were rarely dissolved due to the formation of CaCO3 film on the surface of sulphate minerals. The water-extractable sulphate in the deep unsaturated zone (>10 m) was mainly derived from the dissolution of evaporite minerals and there was no oxidation of sulphide minerals during the extraction of soil water by elutriating soil samples with deionized water. The water-extractable concentration of SO4 was not representative of the actual SO4 concentration in mobile soil water. Therefore, the recharge rate cannot be estimated by the SMB method using the water-extractable concentration of SO4 in the loess areas. This study is important for identifying sulphate sources and clarifying the proper method for estimating the recharge rate in loess aquifers.  相似文献   

8.
To explore whether quinone moieties are important in chromophoric dissolved organic matter (CDOM) photochemistry in natural waters, hydrogen peroxide (H2O2) production and associated optical property changes were measured in aqueous solutions irradiated with a Xenon lamp for CDOM model compounds (dihydroquinone, benzoquinone, anthraquinone, napthoquinone, ubiquinone, humic acid HA, fulvic acid FA). All compounds produced H2O2 with concentrations ranging from 15 to 500 μM. Production rates were higher for HA vs. FA (1.32 vs. 0.176 mM h−1); values ranged from 6.99 to 0.137 mM h−1 for quinones. Apparent quantum yields (Θapp; measure of photochemical production efficiency) were higher for HA vs. FA (0.113 vs. 0.016) and ranged from 0.0018 to 0.083 for quinones. Dihydroquinone, the reduced form of benzoquinone, had a higher production rate and efficiency than its oxidized form. Post-irradiation, quinone compounds had absorption spectra similar to HA and FA and 3D-excitation–emission matrix fluorescence spectra (EEMs) with fluorescent peaks in regions associated with CDOM.  相似文献   

9.
This experimental research deals with using steel scrap as a heterogeneous catalyst. This catalyzes the oxidation reaction of real textile dye wastewater based on a modified solar photo‐Fenton oxidation process. Morphologic analysis and mapping of the elementary composition of the steel scrap have been carried out by scanning electron microscopy. The effects of concentration of H2O2, the pH of the solution and the catalyst loading on the degradation of textile dye wastewater are elucidated. Kinetic studies have been performed for the decolorization of wastewater under optimum conditions. It could be concluded that the steel scrap is a potential substitute for ferrous salts as a catalyst for the solar photo‐Fenton reaction.  相似文献   

10.
The degradation pathway for the oxidation of EDTA in the UV/H2O2-process was investigated. In absence of iron ions, the mineralization of EDTA is dominated by the reaction of the HO-radicals generated by the photolysis of H2O2. The organic degradation products iminodiacetate (IMDA), glycinate, oxamate, glyoxylate, oxalate and formate, and the inorganic degradation products carbon dioxide, ammonia, nitrate, nitrite, and cyanate were found. In the presence of iron ions, photolytic decarboxylation processes inside the complex get an important role during degradation, and the organic degradation products ethylenediaminetriacetate (ED3A), ethylenediaminediacetate (EDDA), ethylenediaminemonoacetate (EDMA) were also found. By combining product studies with balances of carbon and nitrogen, the degradation pathway in the UV/H2O2-process could be elucidated. The degradation of EDTA was fast (kdeg = 0.012 s–1), and no toxic degradation products were identified. Therefore, the process is well suited for the elimination of EDTA in water treatment.  相似文献   

11.
13C and ΣCO2 data from the North and South Atlantic, the Antarctic, and the North and South Pacific are given. The δ13C of the ΣCO2 in the deep water (~3000m) decreases from 1.7‰ in the North Atlantic to ?0.10‰ in the North Pacific. This change is attributed to the addition of about 158 μmoles of CO2 per kg of seawater. The in-situ oxidation of organic matter accounts for 83% of this increase in ΣCO2, while the remainder is attributed to dissolution of calcium carbonate.The δ13C of the dissolved CO2 in mid-latitude surface water samples is controlled by a quasi-steady-state equilibrium with atmospheric CO2 at a mean temperature of 16°C. The δ13C and ΣCO2 values of Antarctic surface water samples suggest that these waters are derived from a mixture of North Atlantic deep water and equilibrated surface water.  相似文献   

12.
Commercial ZnO, MnO2, and their acid‐treated forms were used as catalysts for oxidative degradation of Orange II dye in water. ZnO and MnO2 were treated with 0.5, 0.75, or 1.0 N aqueous H2SO4. The acid treated oxides were found to be highly effective in bringing about degradation of Orange II in water. As much as 68.7% of the dye in an aqueous solution of 1 mg/L concentration could be degraded with untreated ZnO as the catalyst. The degradation increased to 79.5% with 1.0 N acid treated ZnO as the catalyst when the reaction was carried out at room temperature for 240 min. The catalytic activity was slightly affected by the solution pH in the range of 2.0–8.0. With MnO2 as the catalyst, there was only 12.7% degradation of the dye, but this increased up to 100% when 0.5 N acid treated MnO2 was used as the catalyst. It was found that a catalyst loading of 5.0 g/L of raw and acid‐treated ZnO and a loading of 0.5 g/L of raw and acid‐treated MnO2 could bring about almost 100% degradation of Orange II in water in an interaction time of 240 min at room temperature.  相似文献   

13.
Pharmaceutical compounds, widely produced and used all around the world, are partly responsible for the widespread water pollution in the environment. Carbamazepine (CBZ) is an antiepileptic drug that persists in the environment for many years. In the present study, we used the TiO2/UV, nanoparticulate zero‐valent iron (NZVI), and NZVI/H2O2 treatment processes to compare efficiency of CBZ removal from water. Influence of NZVI loading, H2O2 concentration, TiO2 loading, UV lamp power, and the matrix (distilled water and groundwater) on CBZ removal efficiency was evaluated using full factorial design. Results indicated that the NZVI/H2O2 process oxidized CBZ within 5 min. On the other hand, the NZVI process alone did not reduce CBZ concentration after 120 min of process time. The NZVI/H2O2 process was equally effective in CBZ removal from both distilled water and groundwater whereas the TiO2/UV process was less effective due to the presence of ions in groundwater. CBZ removal efficiency of the TiO2/UV process declined 30% when the matrix was changed from distilled water to groundwater. Negative divalent ions, i.e., and , were the main cause of reduction of CBZ removal efficiency from groundwater. It is likely that these two ions adsorb onto, and consequently prevent the superoxide anion and hydroxyl radical OH? from being generated on, the surface of the TiO2.  相似文献   

14.
In the present study, a method is proposed for the determination of lead at trace levels by slotted quartz tube-flame atomic absorption spectrophotometry (SQT-FAAS) after preconcentration with stearic acid coated magnetic nanoparticle-based dispersive solid phase extraction (SA-MNP-DSPE). The slotted quartz tube (SQT) is used to enhance the analyte atom residence time in the light path. Stearic acid coated magnetic iron oxide (Fe3O4) nanoparticles, which can be easily collected with an external magnet, are used as adsorbent in the extraction process. The limit of detection (LOD) and the limit of quantitation (LOQ) values of the proposed method are obtained as 0.90 and 2.9 µg L−1, respectively. The method allows high repeatability in a wide linear range between 5.0 and 250 µg L−1, and the relative standard deviation for six replicates is 5.8%. The detection power is enhanced by about 77-fold compared to the regular flame atomic absorption spectrophotometry (FAAS) system. The method is validated by recovery experiments to four different lake water samples. After the spiking tests, good recovery results are calculated between 97% and 106%. These results show that lead can be detected at low levels in lake water samples with high sensitivity, accuracy, and precision.  相似文献   

15.
In the present study, the effects of initial COD (chemical oxygen demand), initial pH, Fe2+/H2O2 molar ratio and UV contact time on COD removal from medium density fiberboard (MDF) wastewater using photo‐assisted Fenton oxidation treatment were investigated. In order to optimize the removal efficiency, batch operations were carried out. The influence of the aforementioned parameters on COD removal efficiency was studied using response surface methodology (RSM). The optimal conditions for maximum COD removal efficiency from MDF wastewater under experimental conditions were obtained at initial COD of 4000 mg/L, Fe2+/H2O2 molar ratio of 0.11, initial solution pH of 6.5 and UV contact time of 70 min. The obtained results for maximum COD removal efficiency of 96% revealed that photo‐assisted Fenton oxidation is very effective for treating MDF wastewater.  相似文献   

16.
The present work focuses on the performance of Fenton, sono‐Fenton, and sono‐photo‐Fenton processes for the oxidation of phenol present in aqueous solution. The effects of H2O2 concentration, Fe2+ concentration, pH, and initial phenol concentration on the oxidation of phenol were studied. The optimum Fe2+ and H2O2 concentrations for the Fenton process were 45 and 800 mg/L, respectively. For the sono‐Fenton process, the optimum Fe2+ and H2O2 concentrations were 30 and 800 mg/L, respectively. The optimal conditions for the sono‐photo‐Fenton process were found to be 20 mg/L of Fe2+ and 700 mg/L of H2O2. The optimum pH was found to be 3 for the processes investigated in the present study. The analysis of results showed that the sono‐photo‐Fenton method reduced the Fe2+ concentration by 30–50% and the H2O2 concentration by 12.5%. It was found that the sono‐photo‐Fenton technique showed better performance than the Fenton and sono‐Fenton processes for the oxidation of phenol. A lumped kinetic model was used to predict the chemical oxygen demand reduction and the model was found to fit the data.  相似文献   

17.
In this study, bench‐scale experiments were conducted to examine the UV/H2O2 oxidation of 17α‐ethynyestradiol (EE2) in water in a batch operation mode. The EE2 degradation exhibited pseudo‐first‐order kinetics, and the removal was ascribed to the production of hydroxyl radicals (?OH) by the UV/H2O2 system. Typically, the EE2 oxidation rate increased with increasing UV intensity and H2O2 dose, and with deceasing initial EE2 levels and solution pH. At EE20 = 650 µg/L, UV intensity = 154 µW/cm2, H2O2 = 5 mg/L, and neutral pH, the UV/H2O2 treatment was able to remove 90% of the EE2 content within 30 min. Four anions commonly present in water were found to inhibit EE2 degradation to varying degrees: > > Cl? > . Our results demonstrate that the described UV/H2O2 process is an effective method to control EE2 pollution in water.  相似文献   

18.
The effect of extraordinary degradation of phenol organics on the SnO2‐Sb2O3/Ti electrode is investigated through experimental research and theoretical analysis. The phenol organics contained 4‐chloro‐phenol, 4‐bromo‐phenol, and 2‐iodo‐phenol. At a current density of 4 mA cm–2 and an electrolysis time of 12 h, the degradation efficiency of the phenols was over 98% with a relatively short degradation time, whereas the degradation time of the PbO2/Ti electrode surpassed 40 h while delivering 100% disposal efficiency. Therefore, the effectiveness of electrochemical (EC) oxidation by the SnO2‐Sb2O3/Ti was superior to that of the PbO2/Ti electrode. At the same time, the SnO2‐Sb2O3/Ti had higher oxygen generation potential and lower electron consumption than the other electrodes. This was mainly due to the effect of the middle Sb2O3 layer, which due to its high porosity and good catalytic effect, contributed to a better catalysis than the SnO2 part.  相似文献   

19.
刘新  吴定桂  江和龙  宋娜 《湖泊科学》2020,32(2):440-449
活性氧物种(ROS)参与天然水体系统中的光化学反应、氧化还原反应,是影响水体中有机污染物的迁移、转化、环境归宿及生态效应的重要因素.然而目前对草源型可溶性有机物(DOM)分解过程中ROS的产生过程并不清楚.本文通过室内模拟实验首先构建了室内测定3种ROS(~3CDOM~*、~1O_2、·OH)的方法,进而分析草源植物——苔草(Carex tristachya)残体浸出液中DOM光降解过程中ROS的产生过程.结果表明:ROS累积含量的产生随着DOM的降解逐渐升高在3种自由基含量中,~3CDOM*的产生含量最多,·OH产生含量低于另外2种ROS两个数量级.CDOM含量与~3CDOM~*、~1O2、·OH浓度呈现正相关关系,尤其与~3CDOM~*和~1O_2浓度的显著性水平最高,·OH次之.ROS浓度与水质指标呈现出不同的线性相关关系,与硝态氮浓度呈负相关关系,而与亚硝态氮浓度呈现正相关关系,并且亚硝态氮对ROS浓度影响效果极显著.同时类蛋白荧光峰值强度的衰减与ROS累积含量呈现极显著负相关关系,脱明在DOM的光降解过程中蛋白质小分子的降解是产生ROS很重要的一个部分.综上通过对草源型DOM光降解过程中ROS产生过程的研究,增加了对湖泊生态系统中水生植物产生ROS的过程、迁移、转化、归宿及其作用机制的认识.  相似文献   

20.
自2005年以来,程海水体的化学需氧量(COD)持续升高,而生化需氧量(BOD)却维持不变,高锰酸盐指数(COD_(Mn))升高也较缓慢.为研究程海COD持续升高的原因,选取程海水体中具有代表性的无机阴离子(Cl~-、F~-、S~(2-)、HCO_3~-)和溶解性有机质(DOM)中不同浓度的胡敏酸(HA)、富里酸(FA)和商品化腐殖酸(SHA),研究其对COD和COD_(Mn)测定的影响,探讨Cl~-和DOM共同存在下对COD测定的影响.结果表明:程海水体中Cl~-浓度对COD存在显著影响,产生的COD值为5.42 mg/L,S~(2-)、F~-和HCO_3~-对COD影响较小;各离子对COD_(Mn)的影响很小;不同浓度梯度的HA、FA和SHA与COD测定结果呈显著线性相关,氧化1 mg C HA、FA和SHA所产生的COD值分别为2.164、1.964和2.362 mg;氧化1 mg C HA和FA所产生的COD_(Mn)值分别为0.646和0.344 mg;DOM对COD测定值的影响显著大于对COD_(Mn)测定值的影响;且一定浓度Cl~-的存在增强了FA与HA对COD测定的影响.该研究为进一步阐明程海COD逐步升高,COD_(Mn)值缓慢升高的内在原因奠定了基础.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号