共查询到19条相似文献，搜索用时 171 毫秒
1.
2.
复合加载情况下精确求解非均质地基上条形基础的极限承载力以及评价影响极限承载力的相关因素,具有很强的工程实用与理论参考价值。基于极限平衡原理,在Mohr-Coulomb破坏准则的基础上,将非均质地基上条形基础极限承载力问题等价为一个边界待定的泛函极值问题。利用变分原理得到与平衡方程相等价的积分约束条件以及相应的欧拉方程与横截条件。引入问题边界条件,利用VC++6.0编制了数值计算程序,求得了复合加载情况下非均质地基破坏时的滑裂面函数与破坏包络曲线。从理论上研究了土体内摩擦角、土体黏聚力、土层强度比与地下水位变化等因素对地基破坏包络曲线的影响。研究结果表明,其解答是地基极限承载力真实解的某一最小上限。 相似文献
3.
4.
用有限元极限平衡法分析边坡的稳定性 总被引：2，自引：1，他引：1
用有限元分析为基础的极限平衡法计算了边坡安全系数,并将结果与摩尔-库仑屈服准则、外接圆D-P屈服准则强度折减法得到的结果、以及Spencer（极限平衡）法的结果进行了比较,结果表明,有限元极限平衡法计算的边坡安全系数与摩尔-库仑屈服准则强度折减法和Spencer法的结果很一致,而D-P准则强度折减法得到的结果偏差较大。叙述了存在已知滑动面和不存在滑动面时有限元极限平衡法的计算方法。用大型通用有限元软件,如ANSYS等,可方便地进行这种方法的边坡安全系数的计算,并有足够的精度。 相似文献
5.
在平面应变条件下,从考虑强度折减的滑动土体极限平衡方程出发,推导出一般情况下均质土坡稳定分析的泛函极值等周模型。依据泛函取极值时必须满足的欧拉方程,通过坐标变换对变分问题求解,得到滑裂面函数及其上分布的法向应力函数。对于给定的边界条件及横截条件,土坡稳定问题转化为求解以两个拉格朗日乘子、安全系数和滑裂面一个端点的x坐标为4个未知量的函数极值问题,可以通过数值计算得到最小安全系数及所对应的最危险滑裂面。考虑坡顶拉裂缝,通过算例分析了不同的滑裂面位置及对应的安全系数。通过对ACADS边坡考题算例分析,在不考虑坡顶开裂的条件下,采用该方法的分析结果与依据极限平衡法得到的各裁判答案非常接近,在考虑坡顶开裂时,安全系数略有减小。 相似文献
6.
极限分析有限元法讲座Ⅲ--增量加载有限元法求解地基极限承载力 总被引：29，自引：6，他引：29
利用有限元法,通过增量加载的方式来求解地基极限承载力。随着荷载的逐渐增加,地基由初始的线性弹性状态逐渐过渡到塑性流动的极限破坏状态,此时有限元的计算将不收敛。它不但可以获得地基的极限荷载的值及荷载-位移关系,而且还能得到经典极限分析法中所采用到的破坏机构。当采用关联流动法则或采用剪胀角为 φ/2 的非关联流动法则时,获得的破坏机构与 Prandtl 的破坏机构一样。对 Prandtl 解的经典算例进行了分析,结果表明:屈服准则的选用对计算结果的影响很大,选择与实际问题相匹配的屈服准则方能得到比较精确的结果。在求解平面应变问题时,在关联流动法则条件下,采用Mohr-Coulomb 内切圆屈服准则,或在非关联流动法则下采用 Mohr-Coulomb 匹配 DP 准则所得结果与 Prandtl 精确解极为接近,可望应用于实际工程分析中。 相似文献
7.
基于极限分析上限法理论,运用体积力增量法,考虑单层滑动面极限分析模型的缺陷,建立考虑含结构面的多岩层错动的任意块体模型,利用岩块体在外荷载作用下达到极限破坏时,外荷载做的功与岩体消耗的功相等为基础建立等式方程,由此推导得到此类边坡稳定系数的计算公式。在分析典型边坡算例的基础上,对比离散元数值模拟结果,验证了该方法的可行性和适用性。对云南省普宣高速公路某顺层岩质边坡进行计算,其稳定系数接近离散元数值模拟结果,数值稍有偏大,边坡稳定。其研究结果为此类边坡稳定性评价提供了一种新的计算方法。 相似文献
8.
基桩极限荷载的确定及其预测 总被引：6，自引：1，他引：6
由基桩静载试验数据建立目标函数，用非线性最小二乘法求解该目标函数的极小值，从而得到基桩极限荷载值。这一方法不仅可用于对单桩极限荷载的精确确定，也可用于对单桩极限荷载的预测，计算实例表明，该方法是很有效的，具有较大的实用价值。 相似文献
9.
与土体稳定有关的工程问题诸如挡土结构物上的土压力、地基承载力以及土坡稳定性都与土的极限平衡状态相关 联。将土体一点（单元）的极限平衡条件推广,给出土体沿滑动面的极限平衡条件,证明了该条件的充分必要性。依据该条件,提出了有限元应力分析与极限平衡结合的有限元极限平衡法及土体稳定的安全系数,并明确了安全系数的物理意义,以评价土工结构的稳定性。随后,列举了该方法在土工结构稳定分析中的一些具有代表性的应用,证明了该法是有效的,可以用于分析岩土工程中的稳定问题。 相似文献
10.
Coulomb土压力理论的两种解法 总被引：2，自引：0，他引：2
采用极限平衡变分法和Culmann分析方法,对土压力问题进行了研究。在极限平衡变分法中,以滑动体静力平衡的2个力的平衡方程为基础,引入Lagrange乘子,将以变分学观点来描述的主动土压力和被动土压力问题,转化为确定含有2个函数自变量的泛函极值问题。依据泛函取极值时,必须满足Euler方程,得出了主动土压力和被动土压力取极值时墙后土体沿平面滑动破坏的结论。在Culmann分析方法中,沿用了Coulomb土压力理论关于平面滑动破坏的假定,而在推导土压力计算公式的过程中,仅利用了滑动体沿某一特定方向的一个力的平衡方程。与目前通行的Coulomb土压力公式的证明过程相比,Culmann分析方法更为简洁。 相似文献
11.
将极限分析的上限定理、有限元离散思想、随机规划理论和蒙特卡洛方法这四者结合起来,提出了一种土质边坡可靠度分析的上限数值方法。首先采用三节点有限单元离散土质边坡,然后将土体的抗剪参数设为随机变量,根据上限定理构建同时满足三角形单元的塑性流动约束条件、单元公共边的塑性流动约束条件和单元速度边界条件的机动许可速度场,并根据内功功率等于外功功率条件建立目标函数,构建土质边坡可靠度分析的上限法随机规划模型。采用蒙特卡洛方法求解上限法随机规划模型,同时提出了一种基于上限法速度场的边坡失效风险系数估算方法,该方法特别适用于具有多种失效模式的边坡风险分析。对2个经典算例进行了深入分析,验证了方法的正确性。 相似文献
12.
S. W. Sloan 《国际地质力学数值与分析法杂志》1989,13(3):263-282
This paper describes a technique for computing rigorous upper bounds on limit loads under conditions of plane strain. The method assumes a perfectly plastic soil model, which is either purely cohesive or cohesive-frictional, and employs finite elements in conjunction with the upper bound theorem of classical plasticity theory. The computational procedure uses three-noded triangular elements with the unknown velocities as the nodal variables. An additional set of unknowns, the plastic multiplier rates, is associated with each element. Kinematically admissible velocity discontinuities are permitted along specified planes within the grid. The finite element formulation of the upper bound theorem leads to a classical linear programming problem where the objective function, which is to be minimized, corresponds to the dissipated power and is expressed in terms of the velocities and plastic multiplier rates. The unknowns are subject to a set of linear constraints arising from the imposition of the flow rulé and velocity boundary conditions. It is shown that the upper bound optimization problem may be solved efficiently by applying an active set algorithm to the dual linear programming problem. Since the computed velocity field satisfies all the conditions of the upper bound theorem, the corresponding limit load is a strict upper bound on the true limit load. Other advantages include the ability to deal with complicated loading, complex geometry and a variety of boundary conditions. Several examples are given to illustrate the effectiveness of the procedure. 相似文献
13.
Effect of combined translation and torsion on undrained uplift capacity of plate anchors: Plastic limit analysis (PLA) solution 
下载免费PDF全文
下载免费PDF全文 Uplift capacity of plate anchors has been the focus of numerous studies, because anchor plates are designed for pull‐out in normal operating conditions. However, the response of plate anchors under 6‐degrees‐of‐freedom loading caused during extreme loading conditions is poorly understood. The purpose of this study is to propose a simple yet sufficiently accurate analytical solution to investigate the behavior of plate anchor under combined in‐plane translation and torsion and to evaluate its effect on the plate uplift bearing capacity. To this end, a modified plastic limit analysis (PLA) approach is introduced and compared with limit equilibrium and simplified upper bound baseline solutions. The proposed method is verified with 3‐dimensional finite element. The variables considered in this study include plate aspect ratio, plate thickness, as well as load direction and eccentricity. Results of analytical solutions indicate the insensitivity of the “shape” of the shear‐torsion yield envelope to plate thickness. This finding facilitates the use of simplified yet reasonable yield envelope for infinitely thin plate obtained from simplified PLA approach for other plate thicknesses. The “size” of the failure envelope (controlled by pure torsional and translational capacity) could be predicted fairly accurately by PLA and limit equilibrium methods. Combination of these analytical methods offers a simple yet reasonably accurate solution to describe shear‐torsion response of anchor plate. The obtained shear‐torsion yield envelope is then fitted in the generalized 6‐degrees‐of‐freedom yield surface which describes the reducing effect of moment, torsion, and planar forces on the uplift capacity of plate. 相似文献
14.
15.
A new method for computing rigorous upper bounds on the limit loads for one‐, two‐ and three‐dimensional continua is described. The formulation is based on linear finite elements, permits kinematically admissible velocity discontinuities at all interelement boundaries, and furnishes a kinematically admissible velocity field by solving a non‐linear programming problem. In the latter, the objective function corresponds to the dissipated power (which is minimized) and the unknowns are subject to linear equality constraints as well as linear and non‐linear inequality constraints. Provided the yield surface is convex, the optimization problem generated by the upper bound method is also convex and can be solved efficiently by applying a two‐stage, quasi‐Newton scheme to the corresponding Kuhn–Tucker optimality conditions. A key advantage of this strategy is that its iteration count is largely independent of the mesh size. Since the formulation permits non‐linear constraints on the unknowns, no linearization of the yield surface is necessary and the modelling of three‐dimensional geometries presents no special difficulties. The utility of the proposed upper bound method is illustrated by applying it to a number of two‐ and three‐dimensional boundary value problems. For a variety of two‐dimensional cases, the new scheme is up to two orders of magnitude faster than an equivalent linear programming scheme which uses yield surface linearization. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
16.
A mesh-free based limit analysis approach is proposed, to determine the upper bound solutions for the collapse loads associated with cohesive soils, under plane strain conditions. In the presented technique, the geometry of problem is just simulated by nodes and there is no need of mesh in the traditional sense. The process of finding an upper bound solution consists of combining limit analysis theory and a mesh-free numerical technique as a discretisation tool. To satisfy the required conditions for the admissibility of the discretised velocity field at the entire problem domain, a strain rate smoothing technique has been adopted. The outcome of proposed combination is a nonlinear optimisation problem which is solved by a direct iterative technique. The solution found by an iterative algorithm is an upper bound for limit load of the stability problem. The efficiency of the proposed method is demonstrated by solving different example problems in the soil mechanics engineering field, at the end of the paper. 相似文献
17.
基于极限分析上限定理与土的抗剪强度折减系数概念,考虑土的强度分布的非均质性与各向异性, 建立了土坡的极限平衡状态方程,由此确定土坡的稳定安全系数及其相应的潜在破坏模式。对于在给定的荷载条件下不能满足抗滑稳定性要求的土坡,考虑采用阻滑桩加固方式,根据桩侧有效土压力的合理分布模式确定桩体与滑动面相交的截面上等效抗滑力和抗滑力矩,考虑土的强度非均质性与各向异性的条件,利用极限分析上限定理建立阻滑桩加固土坡的极限平衡状态方程,将桩侧土压力作为目标函数,运用数学规划方法确定极限平衡状态时的临界桩侧有效土压力。通过大量的变动参数对比计算,探讨了土的强度的非均质性与各向异性等因素对阻滑桩桩侧极限抗力及最优加固位置的影响。 相似文献
18.
基于极限分析的上限定理,提出一种土石坝极限抗震分析的新方法。该方法假定土体为理想刚塑性材料且满足相关联流动准则,将土石坝坡滑动体划分为若干水平土条,计算各滑动土条的外功率与内能耗散,然后通过能量平衡条件,利用优化算法确定土石坝的极限抗震能力。运用所提方法,对一典型心墙土石坝进行极限抗震能力分析,研究了水平条分数以及抗剪强度参数对极限抗震能力影响。计算结果表明,水平条分数对滑裂面形状影响较大而对大坝极限抗震能力影响较小。当水平条分数增加到一定数目时大坝极限抗震能力最终趋于一个稳定值。同时,堆石料的抗剪强度对大坝极限抗震能力影响较大。通过与传统的极限平衡法对比,验证了所提方法的正确性与可行性。 相似文献
19.
考虑孔隙水压力的土坡稳定性的有限元上限分析 总被引：3，自引：0，他引：3
基于塑性极限分析的上限定理,考虑孔隙水压力的影响,以结点速度为未知量,根据塑性流动约束条件、速度间断约束条件、速度边界约束条件以及由外功功率与内功功率相等条件得到的目标函数,建立了求解孔隙水压力条件下土坡稳定性的有限元塑性极限分析线性规划数学模型;可求得边坡安全系数的上限值及相应的机动容许位移场;最后对2个经典算例进行了分析,验证了提出方法和程序是正确可行的。 相似文献