首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 812 毫秒
1.
Focal mechanisms of earthquakes and fault‐slip data have been collected to constrain the strain regime acting in the hydrothermal zone and surrounding areas of the Campanian Plain (southern Italy), a NW–SE elongated structural depression. The NW–SE striking faults bounding the depression move in response to a NE–SW striking regional extension. Within the depression, an extended hydrothermal circulation occurs related to the Vesuvius, Campi Flegrei and Ischia active volcanoes. In this zone, the strike of the extension is N–S. Results from a finite element model constrained by the collected data show that the presence of a lower rigidity zone due to the hydrothermal circulation may explain (a) the observed deflection of the direction of regional extension, and (b) why large magnitude earthquakes occur at the boundaries of the hydrothermal zone and not along the faults delimiting the structural depression.  相似文献   

2.
  相似文献   

3.
The Triassic to Cretaceous sediment succession of the Lechtal Nappe in the western part of the Northern Calcareous Alps (NCA) has been deformed into large-scale folds and crosscut by thrust and extensional faults during Late Cretaceous (Eoalpine) and Tertiary orogenic processes. The following sequence of deformation is developed from overprinting relations in the field: (D1) NW-vergent folds related to thrusting; (D2) N–S shortening leading to east–west-trending folds and to the formation of a steep belt (Arlberg Steep Zone) along the southern border of the NCA; (D3) E–W to NE–SW extension and vertical shortening, leading to low-angle normal faulting and recumbent “collapse folds” like the Wildberg Syncline. D1 and D2 are Cretaceous in age and predate the Eocene emplacement of the Austroalpine on the Penninic Nappes along the Austroalpine basal thrust; the same is probably true for D3. Finally, the basal thrust was deformed by folds related to out-of-sequence thrusting. These results suggest that the NCA were at least partly in a state of extension during the sedimentation of the Gosau Group in the Late Cretaceous.  相似文献   

4.
《Geodinamica Acta》2003,16(2-6):131-147
Combining fieldwork and surface data, we have reconstructed the Cenozoic structural and tectonic evolution of the Northern Bresse. Analysis of drainage network geometry allowed to detect three major fault zones trending NE–SW, E–W and NW–SE, and smooth folds with NNE trending axes, all corroborated with shallow well data in the graben and fieldwork on edges. Cenozoic paleostress succession was determined through fault slip and calcite twin inversions, taking into account data of relative chronology. A N–S major compression, attributed to the Pyrenean orogenesis, has activated strike-slip faults trending NNE along the western edge and NE–SW in the graben. After a transitional minor E–W trending extension, the Oligocene WNW extension has structured the graben by a collapse along NNE to NE–SW normal faults. A local NNW extension closes this phase. The Alpine collision has led to an ENE compression at Early Miocene. The following WNW trending major compression has generated shallow deformation in Bresse, but no deformation along the western edge. The calculation of potential reactivation of pre-existing faults enables to propose a structural sketch map for this event, with a NE–SW trending transfer fault zone, inactivity of the NNE edge faults, and possibly large wavelength folding, which could explain the deposit agency and repartition of Miocene to Quaternary deformation.  相似文献   

5.
The increasing number of earthquakes in recent decades in Northwestern Iran and the determination of the epicenters of these events makes possible to estimate accurately the changing tectonic regime using the Win-Tensor inversion focal mechanism program. For this purpose focal mechanism data were collected from various sources, including the Centroid Moment Tensor catalog (CMT). The focal mechanism and fault slip data were analyzed to determine change in the stress field up to the present day. The results showed that two stages of brittle deformation occurred in the region. The first stage was related to Eocene compression in NE–SW direction, which created compressional structures with NW–SE strike, including the North and South Bozgush, south Ahar and Gushedagh thrust belts. The second brittle stage began in the Miocene with NW–SE compression and caused developing thrusts with N–S trends that were active presently. These stress regimes were created by the counter-clockwise rotation of the Azerbaijan plateau caused by movement on strike slip faults and continuous compression between the Arabian plate, the south Caspian basin and the Caucasus region. Pliocene-Quaternary activity of the Sabalan and Sahand volcanoes as well as recent earthquakes occurred as a result of this displacement and rotational movement. The abundance of hot springs in the Ardebil, Hero Abad and Bostanabad areas also bore witness to this activity.  相似文献   

6.
This study presents an updated set of earthquake focal mechanisms in the Helvetic and Penninic/Austroalpine domains of the eastern Swiss Alps. In eight cases, based on high-precision relative hypocentre locations of events within individual earthquake sequences, it was possible to identify the active fault plane. Whereas the focal mechanisms in the Helvetic domain are mostly strike-slip, the Penninic/Austroalpine domain is dominated by normal-faulting mechanisms. Given this systematic difference in faulting style, an inversion for the stress field was performed separately for the two regions. The stress field in the Penninic/Austroalpine domain is characterized by extension oriented obliquely to the E–W strike of the orogen. Hence, the Penninic nappes, which were emplaced as large-scale compressional structures during the Alpine orogenesis, are now deforming in an extensional mode. This contrasts with the more compressional strike-slip regime in the Helvetic domain towards the northern Alpine front. Relative to the regional stress field seen in the northern Alpine foreland with a NNW–SSE compression and an ENE–WSW extension, the orientation of the least compressive stress in the Penninic/Austroalpine domain is rotated counter-clockwise by about 40°. Following earlier studies, the observed rotation of the orientation of the least compressive stress in the Penninic/Austroalpine region can be explained as the superposition of the regional stress field of the northern foreland and a uniaxial extensional stress perpendicular to the local trend of the Alpine mountain belt.  相似文献   

7.
The boundary zone between two Penninic nappes, the eclogite-facies to ultrahigh-pressure Zermatt-Saas zone in the footwall and the blueschist-facies Combin zone in the hanging wall, has been interpreted previously as a major normal fault reflecting synorogenic crustal extension. Quartz textures of mylonites from this fault were measured using neutron diffraction. Together with structural field observations, the data allow a refined reconstruction of the kinematic evolution of the Pennine nappes. The main results are: (1) the contact is not a normal fault but a major thrust towards northwest which was only later overprinted by southeast-directed normal faulting; (2) exhumation of the footwall rocks did not occur during crustal extension but during crustal shortening; (3) the Sesia-Dent Blanche nappe system originated from a continental fragment (Cervinia) in the Alpine Tethys ocean, and the Combin zone ophiolites from the ocean basin southeast of Cervinia; (4) out-of-sequence thrusting played a major role in the tectonic evolution of the Penninic nappes. An erratum to this article can be found at  相似文献   

8.
18th June, 2010 5.9 Mw earthquake at North Andaman triggered along NW–SE pre-existing fault with reverse fault mechanism. Macroseismic survey and GPS geodesy reveal maximum damages following NE–SW trend due to normal fault mechanism. Coulomb stress modeling for post- and inter-seismic earthquakes after the 2004 mega-earthquake show different stages of fault segment linkage at North Andaman. The present earthquake has been explained as co-shock due to asiesmic soft linkage of fault propagation.  相似文献   

9.
The Main Recent Fault of the Zagros Orogen is an active major dextral strike-slip fault along the Zagros collision zone, generated by oblique continent–continent collision of the Arabian plate with Iranian micro-continent. Two different fault styles are observed along the Piranshahr fault segment of the Main Recent Fault in NW Iran. The first style is a SW-dipping oblique reverse fault with dextral strike-slip displacement and the second style consists of cross-cutting NE-dipping, oblique normal fault dipping to the NE with the same dextral strike-slip displacement. A fault propagation anticline is generated SW of the oblique reverse fault. An active pull-apart basin has been produced to the NE of the Piranshahr oblique normal fault and is associated with other sub-parallel NE-dipping normal faults cutting the reverse oblique fault. Another cross-cutting set of NE–SW trending normal faults are also exist in the pull-apart area. We conclude that the NE verging major dextral oblique reverse fault initiated as a SW verging thrust system due to dextral transpression tectonic of the Zagros collision zone and later it has been overprinted by the NE-dipping oblique normal fault producing dextral strike-slip displacement reflecting progressive change of transpression into transtension in the collision zone. The active Piranshahr pull-apart basin has been generated due to a releasing damage zone along the NW segment of the Main Recent Fault in this area at an overlap of Piranshahr oblique normal fault segment of the Main Recent Fault and the Serow fault, the continuation of the Main Recent Fault to the N.  相似文献   

10.
The northerly dipping Sha’it–Nugrus shear zone (SNSZ) is the boundary separating the Central Eastern Desert from the South Eastern Desert of Egypt. The hangingwall of this shear zone is composed of low-grade metavolcanics and ophiolitic nappes of the Central Eastern Desert, while the footwall consists of South Eastern Desert high-grade metapsammitic gneisses (Migif-Hafafit gneissic complex). The SNSZ is about 700 m thick and represents the shear foliated lower parts of the hangingwall and upper parts of the footwall. A significant part of the SNSZ has been truncated by a later normal fault along Wadi Sha’it, however the SNSZ is well-preserved along Wadi Nugrus. Features of the SNSZ include shear-related schistosity (termed Ss), mylonite zones, sheared syn-kinematic granitoid intrusions, diverse metasomatism and metamorphic effects (higher T overprinting of hangingwall lithologies and retrogression of footwall lithologies). Shear-sense indicators clearly show top-to-N or NW displacement sense. SNSZ structures overprint arc collision related nappe structures (～680 Ma) and are therefore post-arc collision. SNSZ syn-kinematic intrusives have been dated at ～600 Ma. The SNSZ is deformed (regionally and locally folded and thrust dissected) during later NE–SW compressive tectonism. The SNSZ had an originally approximately E–W strike, low-angle N-dip and a normal shear sense, making this an example of a low-angle normal ductile shear (LANF) or detachment fault. The steep NE dip of Ss foliations and low-pitching slip lineations along Wadi Nugrus are due to NW–SE folding of the SNSZ, and do not indicate a sinistral strike-slip shear zone. The normal shear sense activity is responsible for juxtaposing the low-grade Central Eastern Desert lithologies against South Eastern Desert gneisses. A displacement of 15–30 km is estimated on the SNSZ, which is comparable to LANF displacements in the Basin and Range province of the western USA. Frictional resistance along this shear was probably reduced by high magmatic fluid pressure and hydrothermal fluid pressure. The vastness and diversity of the hydrothermal activity along this shear zone is a characteristic of other LANFs in the Eastern Desert, e.g. at Gabal El-Sibai, and may be Gabal Meatiq. The SNSZ formed during the Neoproterozoic extensional tectonic phase of Eastern Desert that began ～600 Ma, and followed arc collision and NW-ward ejection of nappes.  相似文献   

11.
《International Geology Review》2012,54(10):1276-1294
The North Dabashan thrust belt, which is located in South Qinling, is bounded by the Ankang fault on the north and the Chengkou–Fangxian fault on the south. The North Dabashan thrust belt experienced multiple stages of structural deformation that were controlled by three palaeostress fields. The first structural event (Middle Triassic) involved NNW–SSE shortening and resulted in the formation of numerous dextral strike-slip structures along the entire Chengkou–Fangxian fault zone and within the North Dabashan thrust belt, which suggests that the South China Block moved to the NW and was obliquely subducted under the North China Block. The second structural event (Late Triassic–Early Jurassic) involved NE–SW shortening that formed NW–SE-trending structures in the North Dabashan thrust belt. The third structural event (Late Jurassic–Early Cretaceous) involved ENE–WSW or nearly E–W shortening and resulted in additional thrusting of the North Dabashan thrust belt to the WSW and formation of the WSW-convex Chengkou–Fangxian fault zone, which has an oroclinal shape. Owing to the pinning of the Hannan massif and Shennongjia massif culminations, numerous sinistral strike-slip structures developed along the eastern Chengkou–Fangxian fault zone and were superimposed over the early dextral strike-slip structures.  相似文献   

12.
We collected materials on geological indicators of paleostresses at the western pericline of the Greater Caucasus mega-anticlinorium and within the large transverse flexure-fault zone (Anapa and Dzhiginka zones) limiting this mega-anticlinorium. Based on the data, we reconstructed local stress states in different tectonic zones. The reconstructed local stresses showed a considerable variation of the orientations axes of principal stress near the two zones. In a site adjacent to the flexure-fault zone and located near the western pericline of the Greater Caucasus mega-anticlinorium, the detachment systems of northeastern (NE–SW) strike are determined. Additionally, field structural studies proved elongation in the northwestern (NW–SE) direction. This was also verified by the reconstruction of orientations of minimum compression stress axes (maximum deviatory tension) implemented by cataclastic analysis of structural–kinematic information on the movements of the fault planes (tectonic cracks and minor ruptures). We found a well-expressed multistage regime of the northwestern (NW–SE) tension within the limits of the Semisam anticline. Tension deformations (along the axis of the main folded structure) are manifested in structures of different scales; the values of relative elongation are defined for some of them. At the western pericline of the Greater Caucasus mega-anticlinorium, in the Miocene deposits, a north–south (NNW) compression regime with steep inclinations of axes of maximum compression stresses was identified. In the boundary zone between the Northwestern Caucasus and transverse Kerch–Taman trough, an alteration of the orientations of main axes of normal stresses was found. These changes led to the replacement of horizontal-compression and horizontalshear (with a NE-oriented compression) settings, which are predominant in the Caucasus, with settings of horizontal tension (with steep NNW-oriented compression axes).  相似文献   

13.
The Schlinig fault at the western border of theÖtztal nappe (Eastern Alps), previously interpreted as a west-directed thrust, actually represents a Late Cretaceous, top-SE to -ESE normal fault, as indicated by sense-of-shear criteria found within cataclasites and greenschist-facies mylonites. Normal faulting postdated and offset an earlier, Cretaceous-age, west-directed thrust at the base of theÖtztal nappe. Shape fabric and crystallographic preferred orientation in completely recrystallized quartz layers in a mylonite from the Schlinig fault record a combination of (1) top-east-southeast simple shear during Late Cretaceous normal faulting, and (2) later north-northeast-directed shortening during the Early Tertiary, also recorded by open folds on the outcrop and map scale. Offset of the basal thrust of theÖtztal nappe across the Schlinig fault indicates a normal displacement of 17 km. The fault was initiated with a dip angle of 10° to 15° (low-angle normal fault). Domino-style extension of the competent Late Triassic Hauptdolomit in the footwall was kinematically linked to normal faulting.

The Schlinig fault belongs to a system of east- to southeast-dipping normal faults which accommodated severe stretching of the Alpine orogen during the Late Cretaceous. The slip direction of extensional faults often parallels the direction of earlier thrusting (top-W to top-NW), only the slip sense is reversed and the normal faults are slightly steeper than the thrusts. In the western Austroalpine nappes, extension started at about 80 Ma and was coeval with subduction of Piemont-Ligurian oceanic lithosphere and continental fragments farther west. The extensional episode led to the formation of Austroalpine Gosau basins with fluviatile to deep-marine sediments. West-directed rollback of an east-dipping Piemont-Ligurian subduction zone is proposed to have caused this stretching in the upper plate.  相似文献   


14.
The Wexford Basin (south-eastern Ireland) is a NE–SW-trending sedimentary basin containing carbonates and evaporites deposited during the Late Tournaisian and Viséan. Two separate depositional areas are defined on the basis of facies and facies associations. Sediments were deposited in inner ramp, lagoonal and peritidal environments near Rosslare, and in a more open-marine, shallow- to moderately deep-water, mid to outer ramp environment in the western area around Duncormick. Thick breccia deposits that occur in the Wexford Basin formed as a result of (i) fault movement that produced syn-sedimentary debris flows in the Late? Chadian (Breccia type I); (ii) dissolution of anhydrite/gypsum and subsequent collapse of sedimentary strata (Breccia type II); and (iii) fracturing and brecciation of porous rock caused by the movement of high temperature, late diagenetic fluids along fault planes (Breccia type III). The NE–SW facies polarity displayed by both sedimentary successions was the result of NW–SE extension and the reactivation of the NE–SW-trending Wexford Boundary Fault during the Chadian. Extension at the SE margin of the basin with downthrow to the NNW gave the basin a half-graben character. Thickening of the debris flow deposits to the SW suggests that while the half-graben was being tilted it also underwent a NE–SW block rotation due to an axial component of that normal fault.  相似文献   

15.
Kh. S. Zaky 《Geotectonics》2017,51(6):625-652
Shear fractures, dip-slip, strike-slip faults and their striations are preserved in the pre- and syn-rift rocks at Gulf of Suez and northwestern margin of the Red Sea. Fault-kinematic analysis and paleostress reconstruction show that the fault systems that control the Red Sea–Gulf of Suez rift structures develop in at least four tectonic stages. The first one is compressional stage and oriented NE–SW. The average stress regime index R' is 1.55 and SHmax oriented NE–SW. This stage is responsible for reactivation of the N–S to NNE, ENE and WNW Precambrian fractures. The second stage is characterized by WNW dextral and NNW to N–S sinistral faults, and is related to NW–SE compressional stress regime. The third stage is belonging to NE–SW extensional regime. The SHmax is oriented NW–SE parallel to the normal faults, and the average stress regime R' is equal 0.26. The NNE–SSW fourth tectonic stage is considered a counterclockwise rotation of the third stage in Pliocene-Pleistocene age. The first and second stages consider the initial stages of rifting, while the third and fourth represent the main stage of rifting.  相似文献   

16.
The Helvetic nappes in the Swiss Alps form a classic fold-and-thrust belt related to overall NNW-directed transport. In western Switzerland, the plunge of nappe fold axes and the regional distribution of units define a broad depression, the Rawil depression, between the culminations of Aiguilles Rouge massif to the SW and Aar massif to the NE. A compilation of data from the literature shows that, in addition to thrusts related to nappe stacking, the Rawil depression is cross-cut by four sets of brittle faults: (1) NE-SW striking normal faults, (2) NW-SE striking normal faults and joints, (3) ENE-WSW striking and (4) WNW-ESE striking normal plus dextral oblique-slip faults. Fault set 1 was probably initiated during sedimentation and reactivated during nappe stacking, whereas the other fault sets formed after emplacement of the Helvetic nappes. We studied in detail two well-exposed parallel fault zones from set 4, the Rezli fault zones (RFZ) in the Wildhorn Nappe. They are SW-dipping oblique-slip faults with a total displacement across the two fault zones of ~200 m vertically and ~680 m horizontally. The fault zones crosscut four different lithologies: limestone, intercalated marl and limestone, marl and sandstone. The internal architecture of the RFZ strongly depends on the lithology in which they developed. In the limestones, they consist of extension veins, stylolites, cataclasites and cemented gouge, in the intercalated marls and limestones of shear zones, brittle fractures and chaotic folds, in the marls of anastomosing shear zones, pressure solution seams and veins and in the sandstones of coarse breccia, brittle faults and extension veins. Sharp, discrete fault planes within the broader fault zones cross-cut all lithologies. Fossil fault zones in the Rezli area can act as a model for studying processes still occurring at deeper levels in this seismically active region.  相似文献   

17.
Palaeostress results derived from brittle mesoscopic structures on Deception Island (Bransfield Trough, Western Antarctica) show a recent stress field characterized by an extensional regime, with local compressional stress states. The maximum horizontal stress (σy) shows NW–SE and NNE–SSW to NE–SW orientations and horizontal extension (σ3) in NE–SW and WNW–ESE to NW–SE directions. Alignments of mesofractures show a maximum of NNE–SSW orientation and several relative maxima striking N030-050E, N060-080E, N110-120E, and N160-170E. Subaerial and submarine macrofaults of Deception Island show six main systems controlling the morphology of the island: N–S, NNE–SSW, NE–SW, ENE–WSW to E–W, WNW–ESE, and NNW–SSE. Geochemical patterns related to submarine hydrothermally influenced fault and fissure pathways also share the same trends. The orientation of these fault systems is compared to Riedel shear fractures. Following this model, we propose two evolutionary stages from geometrical relationships between the location and orientation of joints and faults. These stages imply a counter-clockwise rotation of Deception Island, which may be linked to a regional left-lateral strike-slip. In addition, the simple shear zone could be a response to oblique convergence between the Antarctic and Pacific plates. This stress direction is consistent with the present-day movements between the Antarctic, Scotia, and Pacific plates. Nevertheless, present basalt-andesitic volcanism and deep earthquake focal mechanisms may indicate rollback of the former Phoenix subducted slab, which is presently amalgamated with the Pacific plate. We postulate that both mechanisms could occur simultaneously.  相似文献   

18.
《International Geology Review》2012,54(12):1401-1418
The Neogene–Quaternary succession in the Kütahya region is of importance in the neotectonic evolution of western Anatolia because the strata contain clear evidence of compression and extension. During the early-middle Miocene, N–S compression/transpression as well as NE–SW- and NW–SE-oriented oblique conjugate faults formed. NE–SW-oriented horsts and grabens developed, controlled by the dominant NE–SW faults. The Seyitömer and Sabuncup?nar grabens were filled primarily by terrestrial clastic sedimentary and volcanic rocks. At the end of the middle Miocene, the graben fill was locally folded and reverse faulted, reflecting reactivation of compression. Between the late Miocene and the middle Pliocene, the region underwent erosion and lacustrine sediments accumulated in topographic lows. Between the middle and late Pliocene, compression in the region was again reactivated and basal units were thrust over the pre-upper Pliocene units. The late Plio-Quaternary marked the onset of N–S extension and development of the NW–SE-oriented Kütahya Graben, co-genetic equivalents of which are common throughout western Anatolia. This study indicates that tectonic evolution of western Anatolia involved multiple stages of contraction and extension.  相似文献   

19.
 We analysed fault plane solutions and borehole breakouts in the eastern part of the Eastern Alps and found a heterogeneous stress field which we interpret as a transition zone of three different stress provinces: the western European stress province with NW to NNW SH orientation and mainly strike-slip faulting regime; the Adriatic stress province with a radial stress pattern and thrust faulting to strike-slip faulting regime; and the Dinaric-Pannonian stress province with NE SH orientation and strike-slip faulting regime. The western Pannonian basin seems to be a part of the transition zone with WNW to NW SH orientation. A stress regime stimulating strike-slip faulting prevails in the Eastern Alps. The south Bohemian basement spur as a major tectonic structure with a high rheological contrast to surrounding units has a strong influence on the stress field and exhibits the highest seismicity at its tip due to stress concentration. From a constructed vertical stress orientation profile we found stress decoupling of the Northern Calcareous Alps from the underlying European foreland. Both the Molasse and the Flysch-Helvetic zone are considered as candidates for decoupling horizons due to stress orientation observations and due to their rheological behaviour. From seismological and rheological data, we suggest a horizontal stress decoupling across the Eastern Alps caused by a weakened central Alpine lithosphere. Received: 3 July 1998 / Accepted: 4 April 1999  相似文献   

20.
The different segments of the tectonic boundary between external (European) and internal (Penninic) units in the Western Alps, the so-called Penninic Front (PF), formed at different times and according to different kinematic scenarios. During a first episode (Eocene), the PF corresponds to a transpressive suture zone between Penninic and European units. North- to NNW-trending stretching lineations, found along internal nappe contacts within the Penninic units, are related to this episode. This subduction zone was sealed by the Priabonian flysch of the Aiguilles d'Arves, a detrital trench formation that formed during the final stages of subduction. During a second episode, starting in mid-Oligocene times, the PF, imaged along the ECORS-CROP profile, acted as a WNW-directed thrust. This thrust, the Roselend Thrust (RT), only partially coincides with the PF. South of Moûtiers, the RT propagates into the Dauphinois units, carrying the former Eocene PF (including the Priabonian flysch) passively in its hangingwall. South of the Pelvoux massif the RT finds its continuation along the "Briançonnais Front", an out-of-sequence thrust behind the Embrunais-Ubaye nappes. On a larger scale, our findings indicate oblique (sinistral) collision within the future Western Alps during the Eocene, followed by westward indentation of the Adriatic block.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号