首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
The sound velocity (V P) of liquid Fe–10 wt% Ni and Fe–10 wt% Ni–4 wt% C up to 6.6 GPa was studied using the ultrasonic pulse-echo method combined with synchrotron X-ray techniques. The obtained V P of liquid Fe–Ni is insensitive to temperature, whereas that of liquid Fe–Ni–C tends to decrease with increasing temperature. The V P values of both liquid Fe–Ni and Fe–Ni–C increase with pressure. Alloying with 10 wt% of Ni slightly reduces the V P of liquid Fe, whereas alloying with C is likely to increase the V P. However, a difference in V P between liquid Fe–Ni and Fe–Ni–C becomes to be smaller at higher temperature. By fitting the measured V P data with the Murnaghan equation of state, the adiabatic bulk modulus (K S0) and its pressure derivative (K S ) were obtained to be K S0 = 103 GPa and K S  = 5.7 for liquid Fe–Ni and K S0 = 110 GPa and K S  = 7.6 for liquid Fe–Ni–C. The calculated density of liquid Fe–Ni–C using the obtained elastic parameters was consistent with the density values measured directly using the X-ray computed tomography technique. In the relation between the density (ρ) and sound velocity (V P) at 5 GPa (the lunar core condition), it was found that the effect of alloying Fe with Ni was that ρ increased mildly and V P decreased, whereas the effect of C dissolution was to decrease ρ but increase V P. In contrast, alloying with S significantly reduces both ρ and V P. Therefore, the effects of light elements (C and S) and Ni on the ρ and V P of liquid Fe are quite different under the lunar core conditions, providing a clue to constrain the light element in the lunar core by comparing with lunar seismic data.  相似文献   

2.
Dam failure constitutes a grave threat to human life. However, there is still a lack of systematic and comprehensive research on the loss of life (L) caused by dam break in China. From the perspective of protecting human life, a new calculation method for L occurred in dam break floods is put forward. Fourteen dam failure cases in China are selected as the basic data by three-dimensional stratified sampling, balancing spatial, vertical elevation and temporal representations, as well as considering various conditions of the dam collapse. The method includes three progressive steps: Firstly, some impact factors of loss of life (IFL) are selected by literature survey, i.e., severity of dam break flood (S F), population at risk (P R), understanding of dam break (U B), warning time (T W) and evacuation condition (E C). And the other IFL of weather during dam break (W B), dam break mode (M B), water storage (S W), building vulnerability (V B), dam break time (T B) and average distance from affected area to dam (D D) are also taken into account to get a more comprehensive consideration. According to disaster system and disaster risk, these eleven IFL are divided into four categories. Through the improved entropy method, eight key IFL are further selected out of the eleven. Secondly, four L modules are built based on four categories, which are L-causing factor module (M 1), L-prone environment module (M 2), affected body module (M 3) and rescue condition module (M 4). Eventually, by using two methods of multivariate nonlinear regression and leave-one-out cross-validation in combination with coupled four modules, the calculation method for L is established. Compared with the results of Graham method and D&M method, the result of the proposed one is much closer to the actual value and performs better in fitting effect and regional applicability. In the application, L calculation and consequence assessment are carried out in the example of Hengjiang reservoir that has already broken down. At the same time, L calculation and risk prediction are used in the analysis of Yunshan reservoir, which is under planning. The proposed method can not only be applied to estimate L and its rate (f L ) under various types of dam break conditions in China, but also provide a reliable consequence assessment and prediction approach to reduce the risk of L.  相似文献   

3.
The results of hydrodynamical calculations of radially pulsating helium stars with masses 0.5MM≤0.9M, bolometric luminosities 600L≤5×103L, and effective temperatures 1.5×104 K≤Teff≤3.5×104 K are presented. The pulsation instability of these stars is due to the effects of ionization of iron-group elements in layers with temperatures T~2×105 K. The calculations were carried out using opacities for the relative mass abundances of hydrogen and heavy elements X=0 and Z=0.01, 0.015, and 0.02. Approximate formulas for the pulsation constant Q over the entire range of pulsation instability of the hot helium stars in terms of the mass M, radius R, effective temperature Teff, and heavy-element abundance Z are derived. The instability of BX Cir to radial pulsations with the observed period Π=0.1066 d occurs only for a mass M≥0.55M, effective temperature Teff≥23000 K, and heavy-element abundance Z≥0.015. The allowed mass of BX Cir is in the range 0.55MM≤0.8M, which corresponds to luminosities 800LM≤1400L and mean radii 1.7R?R?2.1R.  相似文献   

4.
The components U0 and V0 of the solar motion and the Oort constant A0 are determined using the data of a homogeneous open-cluster catalog with corrected distance moduli. The results are based on a sample of 146 open clusters with known radial velocities located in the Galactic plane (b<7°) within 4 kpc of the Sun. The solar Galactocentric distance R0 is determined using two kinematic methods. The following results are obtained: A0=17.0±0.9 km/s kpc, U0=10.5±1.0 km/s, V0=11.5±1.1 km/s, R0=8.3±0.3 pc.  相似文献   

5.
We use a sample of 808 quasars selected by Risaliti and Lusso to estimate two important cosmological parameters: the percentage of matter in the Universe Ωm and the Hubble constant. The method is based on an auxiliary experimental correlation between the luminosity of quasars in the Xray band and UV band in the form log LX = β + γ log LUV. For the flat ΛCDM model our fit gives Ω m = 0.21 ± 0.12. Our main results are the following: firstly, the fraction of matter (baryonic + dark) contained in the Universe is 21% according to our estimate and is smaller than the one found by other authors using Type Ia Supernovae (though, considering the large error, our result is consistent with the supernova data). Secondly, the Einstein–de Sitter model is outside the 95% confidence interval of our best fit curve. In order to determine also the Hubble constant, we were compelled to fix one of the free parameters (β, γ,H0 m ) and to determine the others with the non-linear least square method. We have proceeded in two different ways. Increasing h0 = H0/100 with a step of 0.01 in the range from 0.65 to 0.95, we obtain a Hubble constant H0 = 74.6± 2.4 (km/s)/Mpc in agreement with the values found using CMB, supernovae and cepheids. On the other hand, increasing the parameter m = β/γ with a step of 0.03 in the range from 13.4 to 14.4, we obtain the same result (but with a greater statistical error), and hence a self-consistentmodel, only assuming β ≥ 8.21.  相似文献   

6.
The Al-rich region of the CaO-MgO-Al2O3-SiO2 system was experimentally studied at pressures of 1.0–2.8 GPa and temperatures of 1300–1535°C. The slopes of the lines of the monovariant reactions An + Sp = Cpx + Cor + (Ga) and L = Cpx + Ga + Cor + Sp and the compositions of the phases involved in these reactions are determined. The results are utilized in the topological analysis of the aluminous region of the CaO-MgO-Al2O3-SiO2 system. On this basis, the principal structure of the phase diagram is analyzed, and a phase diagram is constructed for the junction region of the quaternary system and the CaO-Al2O3-SiO2 ternary system. A continuous series of the monovariant eutectic: L = Cpx + Opx + Fo + An, L = Cpx + Opx + An + Sp, L = Cpx + (Ga) + An + Sp, L = Cpx + Cor + (Ga) + An, L = An + Ga + Cpx + Ky and L = Ga + Cpx + Ky + Qz is examined within the pressure range from atmospheric to 3.0 GPa and higher. Analogous “telescoped” eutectic series are of fundamental character for interpreting the evolution of magmatic melts. A physicochemical model is suggested for the evolution of magmatic melts that produce rocks of the calc-alkaline series, with this model underlain by the fact that a change in the composition of magmatic melt at a pressure decrease should correspond to the minimum melting temperatures, i.e., to melts in the fundamental series of eutectic reactions. The comparison of our physicochemical model and rocks of the calc-alkaline series shows that the compositions of rocks of the calc-alkaline series are close to the compositions determined for the eutectic equilibria, and the mineralogical composition of xenoliths and megacrysts in volcanic and dike varieties of the rocks are similar to the subsolidus phases of the established fundamental eutectic system.  相似文献   

7.
The stress regime in a Rotliegend reservoir of the Northeast German Basin   总被引:2,自引:0,他引:2  
In-situ stresses have significant impact, either positive or negative, on the short and long term behaviour of fractured reservoirs. The knowledge of the stress conditions are therefore important for planning and utilization of man-made geothermal reservoirs. The geothermal field Groß Schönebeck (40 km north of Berlin/Germany) belongs to the key sites in the northeastern German Basin. We present a stress state determination for this Lower Permian (Rotliegend) reservoir by an integrated approach of 3D structural modelling, 3D fault mapping, stress ratio definition based on frictional constraints, and slip-tendency analysis. The results indicate stress ratios of the minimum horizontal stress S hmin being equal or increasing 0.55 times the amount of the vertical stress S V (S hmin ≥ 0.55S V ) and of the maximum horizontal stress S Hmax ≤ 0.78–1.00S V in stress regimes from normal to strike slip faulting. Thus, acting stresses in the 4,100-m deep reservoir are S V  = 100 MPa, S hmin = 55 MPa and S Hmax = 78?100 MPa. Values from hydraulic fracturing support these results. Various fault sets of the reservoir are characterized in terms of their potential to conduct geothermal fluids based on their slip and dilatation tendency. This combined approach can be adopted to any other geothermal site investigation.  相似文献   

8.
Multi-epoch observations with high spectral resolution acquired in 1998–2008 are used to study the time behavior of the spectral-line profiles and velocity fields in the atmosphere and circumstellar shell of the post-AGB star V448 Lac. Asymmetry of the profiles of the strongest absorption lines with lower-level excitation potentials χ low < 1 eV and time variations of these profiles have been detected, most prominently the profiles of the resonance lines of BaII, YII, LaII, SiII. The peculiarities of these profiles can be explained using a superposition of stellar absorption line and shell emission lines. Emission in the (0; 1) 5635 Å Swan system band of the C2 molecule has been detected in the spectrum of V448 Lac for the first time. The core of the Hα line displays radial-velocity variations with an amplitude of ΔV r ≈ 8 km/s. Radial-velocity variations displayed by weak metallic lines with lower amplitudes, ΔV r ≈ 1–2 km/s, may be due to atmospheric pulsations. Differential line shifts, ΔV r = 0–8 km/s have been detected on various dates. The position of the molecular spectrum is stationary in time, indicating a constant expansion velocity of the circumstellar shell, V exp = 15.2 km/s, as derived from the C2 and NaI lines.  相似文献   

9.
A CCD BV R photometric study of the central region (15″ ≤ r ≤ 100″) of the globular cluster NGC 7006 based on color-magnitude diagrams is presented. We find for the main parameters of the cluster [Fe/H] = ?1.62, Y = 0.21, E B?V = 0.15 m , V HB = 18.84 m , M V HB =+0.56 m , R = 37.1 kpc). Two previously unknown RR Lyr variables were discovered in the central region of the cluster. The morphological index of the horizontal branch for the entire region studied indicates that the red stellar population dominates, consistent with previous studies: HB mi = ?0.13. Such anomalously negative morphological indices are possessed by a whole group of Ool clusters with intermediate metallicities, which also display a characteristic distribution of stars along the horizontal branch. There is a radial dependence for the horizontal-branch morphology, with the color becoming primarily blue with approach toward the cluster center. One possible origin for this behavior could be the effect of inner dynamical processes on the spatial distribution of hot stars.  相似文献   

10.
For feasibility studies and preliminary design estimates, field measurements of shear wave velocity, V s, may not be economically adequate and empirical correlations between V s and more available penetration measurements such as cone penetration test, CPT, data turn out to be potentially valuable at least for initial evaluation of the small-strain stiffness of soils. These types of correlations between geophysical (Vs) and geotechnical (N-SPT, q c-CPT) measurements are also of utmost importance where a great precision in the calculation of the deposit response is required such as in liquefaction evaluation or earthquake ground response analyses. In this study, the stress-normalized shear wave velocity V s1 (in m/s) is defined as statistical functions of the normalized dimensionless resistance, Q tn-CPT, and the mean effective diameter, D 50 (in mm), using a data set of different uncemented soils of Holocene age accumulated at various sites in North America, Europe, and Asia. The V s1Q tn data exhibit different trends with respect to grain sizes. For soils with mean grain size (D 50) < 0.2 mm, the V s1/Q tn 0.25 ratio undergoes a significant reduction with the increase in D 50 of the soil. This trend is completely reversed with further increase in D 50 (D 50 > 0.2 mm). These results corroborate earlier results that stressed the use of different CPT-based correlations with different soil types, and those emphasized the need to impose particle-size limits on the validity of the majority of available correlations.  相似文献   

11.
SDO/HMI and SDO/AIA data for the 24th solar-activity cycle are analyzed using a quicker and more accurate method for resolving π ambiguities in the transverse component of the photospheric magnetic field, yielding new results and confirming some earlier results on the magnetic properties of leading and following magnetically connected spots and single spots. The minimum inclination of the field lines to the positive normal to the solar surface α min within umbrae is smaller in leading than in following spots in 78% of the spot pairs considered; the same trend is found for the mean angle 〈α〉 in 83% of the spot pairs. Positive correlations between the α min values and the 〈α〉 values in leading and following spots are also found. On average, in umbrae, the mean values of 〈B〉, the umbra area S, and the angles α min and 〈α〉 decrease with growth in the maximum magnetic field B max in both leading and following spots. The presence of a positive correlation between B max and S is confirmed, and a positive correlation between 〈B〉 and S in leading and following spots has been found. Themagnetic properties of the umbrae of magnetically connected pairs of spots are compared with the contrast of the He II 304 emission above the umbrae, C 304. Spots satisfying certain conditions display a positive correlation between C 304?L and 〈α L 〉 for the leading (L) spots, and between C 304?L /C 304?F and l L /l F , where l L (l F ) are the lengths of the field lines connecting leading (L) or following (F) spots from the corresponding spot umbrae to the apex of the field line.  相似文献   

12.
Before starting seismic cycle of Ahar–Varzaghan 2012 event, a partial gap in the form of a pre-seismic calm sequence (seismicity rate, r = 0.46 event/year, b = 1.4) with duration of 303 days spatially has dominated over the entire seismogenic area. From April 17, 2012, to May 31, 2012, r significantly increased to 2.16, indicating strong foreshock sequence, and b value changed to 1.9, remarkably. In the last two months before the mainshock, foreshocks have partially migrated toward the earthquake fault (with a decrease in size, b = 2.0). Significantly, high rate of seismicity and low V P /V S (1.64) in the foreshocks sequence and also very high seismicity rate (17.3) and high V P /V S (1.76) in the aftershocks sequence make substantial differences between the seismic cycle and the background seismicity. Moreover, a significant E–W migration of the microseismicity was confirmed in the study area.  相似文献   

13.
Estimates of the masses of supermassive black holes (M bh ) in the nuclei of disk galaxies with known rotation curves are compared with estimates of the rotational velocities V m and the “indicative” masses of the galaxies M i . Although there is a correlation between M bh and V m or M i , it is appreciably weaker than the correlation with the central velocity dispersion. The values of M bh for early-type galaxies (S0-Sab), which have more massive bulges, are, on average, higher than the values for late-type galaxies with the same rotational velocities. We conclude that the black-hole masses are determined primarily by the properties of the bulge and not the rotational velocity or the mass of the galaxy.  相似文献   

14.
AIA/SDO data in the 193 Å channel preceding a coronal mass ejection observed at the solar limb on June 13, 2010 are used to simultaneously identify and examine two different shock fronts. The angular size of each front relative to the CME center was about 20°, and their propagation directions differed by ≈25° (≈4° in position angle). The faster front, called the blast shock, advanced the other front, called the piston shock, by R ≈ (0.02-0.03)R⊙ (R⊙ is the solar radius) and had a maximum initial speed of VB ≈ 850 km/s (with VP ≈ 700 km/s for the piston shock). The appearance and motion of these shocks were accompanied by a Type II radio burst observed at the fundamental frequency F and second harmonic H. Each frequency was split into two close frequencies f1 and f2 separated by Δf = f2 - f1 ? F, H. It is concluded that the observed frequency splitting Δf of the F and H components of the Type II burst could result from the simultaneous propagation of piston and blast shocks moving with different speeds in somewhat different directions displaying different coronal-plasma densities.  相似文献   

15.
In this paper, multivariate adaptive regression splines (MARS) was developed as a novel soft-computing technique for predicting longitudinal dispersion coefficient (DL) in rivers. As mentioned in the literature, experimental dataset related to DL was collected and used for preparing MARS model. Results of MARS model were compared with multi-layer neural network model and empirical formulas. To define the most effective parameters on DL, the Gamma test was used. Performance of MARS model was assessed by calculation of standard error indices. Error indices showed that MARS model has suitable performance and is more accurate compared to multi-layer neural network model and empirical formulas. Results of the Gamma test and MARS model showed that flow depth (H) and ratio of the mean velocity to shear velocity (u/u?) were the most effective parameters on the DL.  相似文献   

16.
It is shown that the approximation of the complex, tidally distorted shape of a star as a circular disc with local line profiles and a linear limb-darkening law, which is usually applied when deriving equatorial stellar rotation velocities from line profiles, leads to overestimation of the equatorial velocity V rot sin i and underestimation of the component mass ratio q = M x /M v . A formula enabling correction of the effect of these simplifying assumptions on the shape of a star is used to re-determine the mass ratios q and the masses of the black holes M x and visual components M v in low-mass X-ray binary systems containing black holes. Taking into account the tidal–rotational distortion of the stellar shape can significantly increase the mass ratios q = M x /M v , reducing M v , while M x changes only slightly. The resulting distribution of M v attains its maximum near M v ? 0.35M , in disagreement with the results of population synthesis computations realizing standard models for Galactic X-ray novae with black holes. Possible ways to overcome this inconsistency are discussed. The derived distribution of M x also differs strongly from the mass distribution for massive stars in the Galaxy.  相似文献   

17.
We report H2O maser line observations of the bright-rimmed globule IC 1396 N using a ground-space interferometer with the 10-m RadioAstron radio telescope as the space-based element. The source was not detected on projected baselines >2.3. Earth diameters, which indicates a lower limit on the maser size of L > 0.03 AU and an upper limit on the brightness temperature of 6.25 × 1012 K. Fringe-rate maps are prepared based on data from ground-ground baselines. Positions, velocities and flux densities of maser spots were determined. Multiple low-velocity features from ?4.5 km/s to +0.7 km/s are seen, and two high-velocity features of V LSR = ?9.4 km/s and V LSR = +4.4 km/s are found at projected distances of 157 AU and 70 AU, respectively, from the strongest low-velocity feature at V LSR = ~+0.3 km/s. Maser components from the central part of the spectrum fall into four velocity groups but into three spatial groups. Three spatial groups of low-velocity features detected in the 2014 observations are arranged in a linear structure about ~200 AU in length. Two of these groups were not detected in 1996 and possibly are jets which formed between 1996 and 2014. The putative jet seems to have changed direction in 18 years, which we explain by the precession of the jet under the influence of the gravity of material surrounding the globule. The jet collimation can be provided by a circumstellar protoplanetary disk. There is a straight line orientation in the “V LSR-Right Ascension” diagram between the jet and the maser group at V LSR = ~+0.3 km/s. However, the central group with the same position but at the velocity V LSR ~ ?3.4 km/s falls on a straight line between two high-velocity components detected in 2014. Comparison of the low-velocity positions from 2014 and 1996, based on the same V LSR-Right Ascension diagram for low-velocity features, shows that the majority of the masers maintain their positions near the central velocity V LSR = ~0.3 km/s during the 18 year period.  相似文献   

18.
A high-pressure single-crystal X-ray diffraction study has been carried out on a P21/c natural Mg-rich pigeonite sample with composition ca. Wo6En76Fs18 using a diamond anvil-cell. The unit-cell parameters were determined at 14 different pressures to 7.14 GPa. The sudden disappearance of the b-type reflections (h + k = odd) and a strong discontinuity (about 2.8%) in the unit-cell volume indicated a first-order P21/cC2/c phase transition between 4.66 and 4.88 GPa. The P(V) data of the P21/c phase were fitted to 4.66 GPa by a third-order Birch–Murnaghan equation of state (BM3 EoS), whereas the limited number of experimental data collected within the C2/c phase between 4.88 and 7.14 GPa were fitted using the same equation of state but with K′ constrained to the value obtained for the P21/c fitting. The equation of state coefficients are V 0 = 424.66(6) Å3, K T0 = 104(2) GPa and K′ = 8(1) for the P21/c phase, and V 0 = 423.6(1) Å3, K T0 = 112.4(8) GPa, and K′ fixed to 8(1) for the C2/c phase. The axial moduli for a, b, and c for the P21/c phase were obtained using also a BM3-EoS, while for the C2/c phase only a linear calculation could be performed, and therefore the same approach was applied for comparison also to the P21/c phase. In general the C2/c phase exhibits axial compressibilities (β c > β a >> β b) lower than those of the P21/c phase (β b > β c ≈ β a; similar to those found in previous studies in clinopyroxenes and orthopyroxenes). The lower compressibility of the C2/c phase compared with that of the P21/c could be ascribed to the greater stiffness along the b direction. A previously published relationship between P c and M2 average cation radius (i.r.) has been updated using all the literature data on P21/c clinopyroxene containing large cations at M2 site and our new data. The following weighted regression was obtained: P c (GPa) = 26(4) ? 28(5) ×  i.r (Å), R 2 = 0.97. This improved equation can be used to predict the critical pressure of natural P21/c clinopyroxene samples just knowing the composition at M2 site.  相似文献   

19.
Modern modeling of the population of low-mass X-ray binary systems containing black holes applying standard assumptions leads to a lack of agreement between the modeled and observed mass distributions for the optical components, with the observed masses being lower. This makes the task of estimating the systematic errors in the derived component masses due to imperfect models relevant. To estimate the influence of systematic errors in the derived masses of stars in X-ray binary systems, we considered two approximations for the tidally deformed star in a Roche model. Approximating the star as a sphere with a volume equal to that of the Roche lobe leads to slight overestimation of the equatorial rotational velocity V rot sin i, and hence to slight underestimation of the mass ratio q = M x /M v . Approximating the star as a flat, circular disk with constant local line profiles and a linear limb-darkening law (a classical rotational broadeningmodel) is an appreciably cruder approach, and leads to overestimation of V rot sin i by about 20%. In the case of high values of q = M x /M v , this approximation leads to substantial underestimation of the mass ratio q, which can reach several tens of percent. The mass of the optical star is overestimated by a factor of 1.5 in this case, while the mass of the black hole is changed only slightly. Since most estimates of component mass ratios for X-ray binary systems are carried out using a classical rotational broadening model for the lines, this leads to the need for appreciable corrections to (reductions of) previously published masses for the optical stars, which enhances the contradiction with the standard evolutionary scenario for low-mass X-ray binaries containing black holes.  相似文献   

20.
Previously, similarity of source spectra of Kamchatka earthquakes with respect to the common corner frequency fc1 and the expressed deviations from similarity for the second fc2 and the third fc3 corner frequencies were revealed. The value of fc3 reflects the characteristic size Lis of fault surface; correspondingly, LisvrTis, where vr is the rupture speed and Tis ≈ 1/fc3 is characteristic time. The estimates of fc3 are used for normalizing fc1 and fc2. In this way one obtains dimensionless rupture temporal parametres τ1 and τ2 and can further study the dependence τ21). The growth of a rupture is considered as a process of aggregation of elementary fault spots of the size Lis. The dimensionless width of the random front of aggregation is on the order of τ2. The relationship τ21) approximately follows power law with exponent β. The estimates of β derived from earthquake populations of Kamchatka, USA and Central Asia (β = 0.35–0.6) agree with values expected from the known Eden’s theory of random aggregation growth and from its generalizations.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号