首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
Probabilistic seismic risk assessment for spatially distributed lifelines is less straightforward than for individual structures. While procedures such as the ‘PEER framework’ have been developed for risk assessment of individual structures, these are not easily applicable to distributed lifeline systems, due to difficulties in describing ground‐motion intensity (e.g. spectral acceleration) over a region (in contrast to ground‐motion intensity at a single site, which is easily quantified using Probabilistic Seismic Hazard Analysis), and since the link between the ground‐motion intensities and lifeline performance is usually not available in closed form. As a result, Monte Carlo simulation (MCS) and its variants are well suited for characterizing ground motions and computing resulting losses to lifelines. This paper proposes a simulation‐based framework for developing a small but stochastically representative catalog of earthquake ground‐motion intensity maps that can be used for lifeline risk assessment. In this framework, Importance Sampling is used to preferentially sample ‘important’ ground‐motion intensity maps, and K‐Means Clustering is used to identify and combine redundant maps in order to obtain a small catalog. The effects of sampling and clustering are accounted for through a weighting on each remaining map, so that the resulting catalog is still a probabilistically correct representation. The feasibility of the proposed simulation framework is illustrated by using it to assess the seismic risk of a simplified model of the San Francisco Bay Area transportation network. A catalog of just 150 intensity maps is generated to represent hazard at 1038 sites from 10 regional fault segments causing earthquakes with magnitudes between five and eight. The risk estimates obtained using these maps are consistent with those obtained using conventional MCS utilizing many orders of magnitudes more ground‐motion intensity maps. Therefore, the proposed technique can be used to drastically reduce the computational expense of a simulation‐based risk assessment, without compromising the accuracy of the risk estimates. This will facilitate computationally intensive risk analysis of systems such as transportation networks. Finally, the study shows that the uncertainties in the ground‐motion intensities and the spatial correlations between ground‐motion intensities at various sites must be modeled in order to obtain unbiased estimates of lifeline risk. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

2.
Earthquake‐induced slope displacement is an important parameter for safety evaluation and earthquake design of slope systems. Traditional probabilistic seismic hazard analysis usually focuses on evaluating slope displacement at a particular location, and it is not suitable for spatially distributed slopes over a large region. This study proposes a computationally efficient framework for fully probabilistic seismic displacement analysis of spatially distributed slope systems using spatially correlated vector intensity measures (IMs). First, a spatial cross‐correlation model for three key ground motion IMs, that is, peak ground acceleration (PGA), Arias intensity, and peak ground velocity, is developed using 2686 ground motion recordings from 11 recent earthquakes. To reduce the computational cost, Monte Carlo simulation and data reduction techniques are utilized to generate spatially correlated random fields for the vector IMs. The slope displacement hazards over the region are further quantified using empirical predictive equations. Finally, an illustrative example is presented to highlight the importance of the spatial correlation and the advantage of using spatially correlated vector IMs in seismic hazard analysis of spatially distributed slopes. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

3.
In many parts of the world, earthquakes threaten regional infrastructure systems. For modeling risk using stochastic earthquake catalogs, random variables include rupture location and the damage state of different components. Thus, there is an infinite set of possible damage maps that a risk modeler could evaluate in an event‐based probabilistic loss model. Even a finite but large number of damage maps may not be practical, because many network performance measures are computationally expensive. Here, we show a computationally efficient method for selecting a subset of damage maps, corresponding ground‐motion intensity maps, and associated occurrence rates that reasonably estimates the full distribution of the ground‐motion intensity and a target performance measure using optimization. The method chooses a subset of maps and associated annual rates of occurrence that minimizes the error in estimating the distribution of a network performance measure as well as the marginal distributions of ground‐motion intensity exceedance. The joint distribution of the ground‐motion intensity is implicitly included in the objective function of the optimization problem via the network performance measure. We then show how to tune the optimization parameters based on consistency checks related to the network performance measure and the ground‐motion hazard. We illustrate the proposed method with a case study of the San Francisco Bay Area road network to estimate the exceedance curve of the average percentage change in morning commute trip time. This work facilitates expanded and risk‐consistent studies of the impacts of infrastructure networks on regional seismic risk and resiliency. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

4.
In addition to the mean values of possible loss during an earthquake, parameters of the probability distribution function for the loss to a portfolio (e.g. fractiles and standard deviation) are very important. Recent studies have shown that the proper treatment of ground‐motion variability and, particularly, the correlation of ground motion are essential for the estimation of the seismic hazard, damage and loss for distributed portfolios. In this study, we compared the effects of variations in the between‐earthquake correlation and in the site‐to‐site correlation on seismic loss and damage estimations for the extended objects (hypothetical portfolio) and critical elements (e.g. bridges) of a network. A scenario earthquake approach and a portfolio containing a set of hypothetical building and bridges were used for the purpose. We showed that the relative influences of the types of correlation on characteristics of loss distribution and the probability of damage are not equal. In some cases, when the median values of loss distribution or the probability that at least one critical element of a lifeline will be damaged are considered and when the spatial correlation of ground motion is used, the possible variations in the between‐earthquake correlation may be neglected. The shape of the site‐to‐site correlation function (i.e. the rate of decrease of the coefficient of spatial correlation with separation distance) seems also to be important when modelling spatially correlated ground‐motion fields. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

5.
  相似文献   

6.
Stochastic ground motion models produce synthetic time‐histories by modulating a white noise sequence through functions that address spectral and temporal properties of the excitation. The resultant ground motions can be then used in simulation‐based seismic risk assessment applications. This is established by relating the parameters of the aforementioned functions to earthquake and site characteristics through predictive relationships. An important concern related to the use of these models is the fact that through current approaches in selecting these predictive relationships, compatibility to the seismic hazard is not guaranteed. This work offers a computationally efficient framework for the modification of stochastic ground motion models to match target intensity measures (IMs) for a specific site and structure of interest. This is set as an optimization problem with a dual objective. The first objective minimizes the discrepancy between the target IMs and the predictions established through the stochastic ground motion model for a chosen earthquake scenario. The second objective constraints the deviation from the model characteristics suggested by existing predictive relationships, guaranteeing that the resultant ground motions not only match the target IMs but are also compatible with regional trends. A framework leveraging kriging surrogate modeling is formulated for performing the resultant multi‐objective optimization, and different computational aspects related to this optimization are discussed in detail. The illustrative implementation shows that the proposed framework can provide ground motions with high compatibility to target IMs with small only deviation from existing predictive relationships and discusses approaches for selecting a final compromise between these two competing objectives.  相似文献   

7.
The conventional integral approach is very well established in probabilistic seismic hazard assessment (PSHA). However, Monte‐Carlo (MC) simulations can become an efficient and flexible alternative against conventional PSHA when more complicated factors (e.g. spatial correlation of ground shaking) are involved. This study aims at showing the implementation of MC simulation techniques for computing the annual exceedance rates of dynamic ground‐motion intensity measures (GMIMs) (e.g. peak ground acceleration and spectral acceleration). We use multi‐scale random field technique to incorporate spatial correlation and near‐fault directivity while generating MC simulations to assess the probabilistic seismic hazard of dynamic GMIMs. Our approach is capable of producing conditional hazard curves as well. We show various examples to illustrate the potential use of the proposed procedures in the hazard and risk assessment of geographically distributed structural systems. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

8.
Recent studies have shown that the proper treatment of ground-motion variability and, particularly, the correlation of ground motion are essential for the estimation of the seismic hazard, damage and loss for distributed portfolios. In this work we compared the effects of variations in the between-earthquake correlation and in the site-to-site correlation on probabilistic estimations of seismic damage and loss for the extended objects (hypothetical portfolio) and critical elements (e.g. bridges) of a network. Taiwan Island has been chosen as a test case for this study because of relatively high seismicity and previous experience in earthquake hazard modelling. The hazard and loss estimations were performed using Monte Carlo approach on the basis of stochastic catalogues and random ground-motion fields. We showed that the influence of correlation on parameters of seismic hazard, characteristics of loss distribution and the probability of damage depend, on one hand, on level of hazard and probability level of interest (return period) and, on the other hand, the relative influence of each type of correlation is not equal.  相似文献   

9.
Reliability and risk assessment of lifeline systems call for efficient methods that integrate hazard and interdependencies. Such methods are computationally challenged when the probabilistic response of systems is tied to multiple events, as performance quantification requires a large catalog of ground motions. Available methods to address this issue use catalog reductions and importance sampling. However, besides comparisons against baseline Monte Carlo trials in select cases, there is no guarantee that such methods will perform or scale well in practice. This paper proposes a new efficient method for reliability assessment of interdependent lifeline systems, termed RAILS, that considers systemic performance and is particularly effective when dealing with large catalogs of events. RAILS uses the state‐space partition method to estimate systemic reliability with theoretical bounds and, for the first time, supports cyclic interdependencies among lifeline systems. Recycling computations across an entire seismic catalog with RAILS considerably reduces the number of system performance evaluations in seismic performance studies. Also, when performance estimate bounds are not tight, we adopt an importance and stratified sampling method that in our computational experiments is various orders of magnitude more efficient than crude Monte Carlo. We assess the efficiency of RAILS using synthetic networks and illustrate its application to quantify the seismic risk of realistic yet streamlined systems hypothetically located in the San Francisco Bay Region.  相似文献   

10.
Conventional damage prediction methods for lifeline structures are primarily based on peak ground motion measurements. However, line structures such as lifelines suffer damage that is mainly induced by the strain of the ground and therefore are likely to be vulnerable to sharp spatial changes in the ground motion. In this study, we propose a measure for evaluating the damage incurred by underground water supply pipelines based on the spatial gradient of the peak ground velocity (PGV), in an attempt to quantify the effects of the geospatial variabilities in the ground motion on pipeline damage. We investigated the spatial distribution of the damage caused to water pipelines during the Niigata‐ken Chuetsu earthquake on October 10, 2004 (Japan Meteorological Agency magnitude (MJMA) of 6.8) and the Kobe earthquake on January 17, 1995 (MJMA7.3) and compared the surveyed damage with the PGV distribution as well as with the gradients of the PGV calculated around the damage areas. For the Kobe earthquake, we used the PGV distribution obtained by the strong‐motion simulation performed by Matsushima and Kawase 1 . In case of the Chuetsu earthquake, we estimated the ground motion using a broadband‐frequency‐based strong‐ground‐motion simulation method based on a multiasperity source model. In both cases, we calculated the gradients of the PGV along the geographical coordinates, with the amplitude of the PGV gradient vector being employed as the damage estimator. Our results show that the distribution of damage to underground water supply pipelines exhibits a greater correlation with the gradients of the PGV than with the PGV itself. Thus, the gradient of the PGV is a useful index for preparing initial‐screening hazard maps of underground facilities. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

11.
在PEER地震动数据库(PGMD)的基础上, 结合近几年国内外特大地震的地面运动记录, 建立了地面运动数据库, 同时根据日本MW9.0特大地震获得的141组记录进行统计回归建立加速度反应谱衰减关系, 并采用条件均值反应谱法, 即设定地震与结构概率需求结合的方法选择地面运动. 选波实例表明, 当设定地震为特大地震时, 基于条件均值反应谱法选取地面运动记录时, 扩展数据库中大震记录并建立符合大震记录加速度反应谱的衰减关系是十分必要与迫切的. 该思路为进一步研究结构动态时程分析中地面运动记录选取问题及所选记录提供了依据.   相似文献   

12.
The majority of bridge infrastructures in Italy were built in the 1960s and ‘70s without any specific seismic provision being made. As a consequence, it is expected that these bridges would be highly vulnerable if subjected to a significant seismic event. Given this background, it is natural that the rapid and accurate assessment of economic losses incurred to the bridge infrastructure as a result of such an event could play a crucial role in emergency management in the immediate aftermath of an earthquake. Focusing on the infrastructure system of highway bridges in the Campania region in Italy, this paper demonstrates how both state-of-the-art methodologies in portfolio loss assessment and the available data can be used to assess the probability distribution of the repair costs incurred due to the 1980 Irpinia earthquake. Formulating a probabilistic loss assessment for a portfolio of bridges as a standard Monte Carlo simulation problem helps to resolve the spatial risk integral efficiently. One of the specific features of this case study is the use of statistical methods for updating models of: (a) ground motion predictions, (b) vulnerability/fragility and (c) exposure/costs, based on the available data. It has been observed that alternative hypotheses concerning the ground motion correlation structure can significantly affect the distribution of direct economic losses. Furthermore, updating the ground motion prediction based on available recordings may significantly reduce the dispersion in the estimate of the direct economic losses.  相似文献   

13.
A method to combine probabilistic seismic hazard analysis and stochastic earthquake motion models is presented. A set of parameters characterizing stochastic earthquake motion models is determined on a consistent probabilistic basis. The method proposed herein consists of two steps. First, the ground motion intensity is determined in the context of the conventional hazard curve technique. Next, other ground motion parameters such as duration, predominant frequency and spectral shape parameters are determined as conditional means corresponding to the annual probability of exceedance for the ground motion intensity. Some example applications are presented.  相似文献   

14.
A probabilistic representation of the entire ground‐motion time history can be constructed based on a stochastic model that depends on seismic source parameters. An advanced stochastic simulation scheme known as Subset Simulation can then be used to efficiently compute the small failure probabilities corresponding to structural limit states. Alternatively, the uncertainty in the ground motion can be represented by adopting a parameter (or a vector of parameters) known as the intensity measure (IM) that captures the dominant features of the ground shaking. Structural performance assessment based on this representation can be broken down into two parts, namely, the structure‐specific part requiring performance assessment for a given value of the IM, and the site‐specific part requiring estimation of the likelihood that ground shaking with a given value of the IM takes place. The effect of these two alternative representations of ground‐motion uncertainty on probabilistic structural response is investigated for two hazard cases. In the first case, these two approaches are compared for a scenario earthquake event with a given magnitude and distance. In the second case, they are compared using a probabilistic seismic hazard analysis to take into account the potential of the surrounding faults to produce events with a range of possible magnitudes and distances. The two approaches are compared on the basis of the probabilistic response of an existing reinforced‐concrete frame structure, which is known to have suffered shear failure in its columns during the 1994 Northridge Earthquake in Los Angeles, California. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

15.
Egypt is located in the northeastern corner of Africa within a sensitive seismotectonic location. Earthquakes are concentrated along the active tectonic boundaries of African, Eurasian, and Arabian plates. The study area is characterized by northward increasing sediment thickness leading to more damage to structures in the north due to multiple reflections of seismic waves. Unfortunately, man-made constructions in Egypt were not designed to resist earthquake ground motions. So, it is important to evaluate the seismic hazard to reduce social and economic losses and preserve lives. The probabilistic seismic hazard assessment is used to evaluate the hazard using alternative seismotectonic models within a logic tree framework. Alternate seismotectonic models, magnitude-frequency relations, and various indigenous attenuation relationships were amended within a logic tree formulation to compute and develop the regional exposure on a set of hazard maps. Hazard contour maps are constructed for peak ground acceleration as well as 0.1-, 0.2-, 0.5-, 1-, and 2-s spectral periods for 100 and 475 years return periods for ground motion on rock. The results illustrate that Egypt is characterized by very low to high seismic activity grading from the west to the eastern part of the country. The uniform hazard spectra are estimated at some important cities distributed allover Egypt. The deaggregation of seismic hazard is estimated at some cities to identify the scenario events that contribute to a selected seismic hazard level. The results of this study can be used in seismic microzonation, risk mitigation, and earthquake engineering purposes.  相似文献   

16.
—?The problem of accounting for local soil effect on earthquake ground motion is especially urgent when assessing seismic hazard – recent needs of earthquake engineering require local site effects to be included into hazard maps. However, most recent works do not consider the variety of soil conditions or are performed for generalized site categories, such as “hard rock,”“soft soil” or “alluvium.” A technique of seismic hazard calculations on the basis of the Fourier Amplitude Spectra recently developed by the authors allows us to create hazard maps involving the influence of local soil conditions using soil/bedrock spectral ratios. Probabilistic microzoning maps may be constructed showing macroseismic intensity, peak ground acceleration, response and design spectra for various return periods (probability of exceedance), that allow optimization of engineering decisions. An application of this approach is presented which focused on the probabilistic microzoning of the Tashkent City.  相似文献   

17.
A proper assessment of seismic hazard is of considerable importance in order to achieve suitable building construction criteria. This paper presents probabilistic seismic hazard assessment in and around Pakistan (23° N–39° N; 59° E–80° E) in terms of peak ground acceleration (PGA). Ground motion is calculated in terms of PGA for a return period of 475 years using a seismogenic-free zone method of Gumbel’s first asymptotic distribution of extreme values and Monte Carlo simulation. Appropriate attenuation relations of universal and local types have been used in this study. The results show that for many parts of Pakistan, the expected seismic hazard is relatively comparable with the level specified in the existing PGA maps.  相似文献   

18.
Regional seismic risk assessments and quantification of portfolio losses often require simulation of spatially distributed ground motions at multiple intensity measures. For a given earthquake, distributed ground motions are characterized by spatial correlation and correlation between different intensity measures, known as cross‐correlation. This study proposes a new spatial cross‐correlation model for within‐event spectral acceleration residuals that uses a combination of principal component analysis (PCA) and geostatistics. Records from 45 earthquakes are used to investigate earthquake‐to‐earthquake trends in application of PCA to spectral acceleration residuals. Based on the findings, PCA is used to determine coefficients that linearly transform cross‐correlated residuals to independent principal components. Nested semivariogram models are then fit to empirical semivariograms to quantify the spatial correlation of principal components. The resultant PCA spatial cross‐correlation model is shown to be accurate and computationally efficient. A step‐by‐step procedure and an example are presented to illustrate the use of the predictive model for rapid simulation of spatially cross‐correlated spectral accelerations at multiple periods.  相似文献   

19.
A set of 3D physics‐based numerical simulations (PBS) of possible earthquakes scenarios in Istanbul along the North Anatolian Fault (Turkey) is considered in this article to provide a comprehensive example of application of PBS to probabilistic seismic hazard (PSHA) and loss assessment in a large urban area. To cope with the high‐frequency (HF) limitations of PBS, numerical results are first postprocessed by a recently introduced technique based on Artificial Neural Networks (ANN), providing broadband waveforms with a proper correlation of HF and low‐frequency (LF) portions of ground motion as well as a proper spatial correlation of peak values also at HF, that is a key feature for the seismic risk application at urban scale. Second, before application to PSHA, a statistical analysis of residuals is carried out to ensure that simulated results provide a set of realizations with a realistic within‐ and between‐event variability of ground motion. PBS results are then applied in a PSHA framework, adopting both the “generalized attenuation function” (GAF) approach, and a novel “footprint” (FP)‐based approach aiming at a convenient and direct application of PBS into PSHA. PSHA results from both approaches are then compared with those obtained from a more standard application of PSHA with empirical ground motion models. Finally, the probabilistic loss assessment of an extended simplified portfolio of buildings is investigated, comparing the results obtained adopting the different approaches: (i) GMPE, (ii) GAF, and (iii) FP. Only FP turned out to have the capability to account for the specific features of source and propagation path, while preserving the proper physically based spatial correlation characteristics, as required for a reliable loss estimate on a building portfolio spatially distributed over a large urban area.  相似文献   

20.
A unified probabilistic seismic hazard assessment (PSHA) for the Pyrenean region has been performed by an international team composed of experts from Spain and France during the Interreg IIIA ISARD project. It is motivated by incoherencies between the seismic hazard zonations of the design codes of France and Spain and by the need for input data to be used to define earthquake scenarios. A great effort was invested in the homogenisation of the input data. All existing seismic data are collected in a database and lead to a unified catalogue using a local magnitude scale. PSHA has been performed using logic trees combined with Monte Carlo simulations to account for both epistemic and aleatory uncertainties. As an alternative to hazard calculation based on seismic sources zone models, a zoneless method is also used to produce a hazard map less dependant on zone boundaries. Two seismogenic source models were defined to take into account the different interpretations existing among specialists. A new regional ground-motion prediction equation based on regional data has been proposed. It was used in combination with published ground-motion prediction equations derived using European and Mediterranean data. The application of this methodology leads to the definition of seismic hazard maps for 475- and 1,975-year return periods for spectral accelerations at periods of 0 (corresponding to peak ground acceleration), 0.1, 0.3, 0.6, 1 and 2 s. Median and percentiles 15% and 85% acceleration contour lines are represented. Finally, the seismic catalogue is used to produce a map of the maximum acceleration expected for comparison with the probabilistic hazard maps. The hazard maps are produced using a grid of 0.1°. The results obtained may be useful for civil protection and risk prevention purposes in France, Spain and Andorra.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号