Adsorption characteristics of phenol and heavy metals on biochar from <Emphasis Type="Italic">Hizikia fusiformis</Emphasis>     

Woo-seok Shin 《Environmental Earth Sciences》2017,76(22):782

The objective of the present study is to evaluate the absorption efficacy of H. fusiformis biochar (HFB) for the removal of phenol and heavy metals from single and mixed solute systems of these species under different experimental conditions. The effects of contact time, pH change, initial phenol concentration, and heavy metal concentration on the adsorption capacity of HFB were investigated. The kinetics and equilibrium models of sorption of the components of the single and mixed solute systems on HFB were also studied. The experimental data were fitted to kinetic and equilibrium models. The batch experiments revealed that 360 min of contact time was sufficient to achieve equilibrium for the adsorption of both phenol and heavy metals. The adsorption of phenol and nickel by HFB followed the pseudo-second-order kinetic model, which was quite adequate for describing the adsorption mechanism. The equilibrium data for the adsorption of phenol and heavy metals fit well to the Langmuir model with regression coefficients of R ² > 0.819. The maximum Langmuir adsorption capacities were 10.39, 12.13, 22.25, 2.24, 2.89, and 22.03 mg/g for phenol, Ni²⁺, Zn²⁺, Cu²⁺, Pb²⁺, and Cd²⁺, respectively. Moreover, HFB exhibited optimal sorption under slightly acidic conditions at pH 6. The HFB used in the present study exhibited higher adsorption capacity for the removal of phenol and heavy metals from aqueous solutions compared to documented sorbents. These results demonstrate that HFB is potentially useful for alleviating the harmful effects of phenol and heavy metal in wastewater treatment systems.  相似文献   

Removal of heavy metal ions from drinking water by alginate-immobilised <Emphasis Type="Italic">Chlorella sorokiniana</Emphasis>     

A. Petrovič  M. Simonič 《International Journal of Environmental Science and Technology》2016,13(7):1761-1780

This paper investigates the potential of alginate-immobilised Chlorella sorokiniana for removing Cu²⁺, Ni²⁺ and Cd²⁺ ions from drinking water solutions. The effects of initial metal concentrations, contact times and temperatures on the biosorptions and removal efficiencies of the tested metals were investigated at initial pH values of 5, and pH effects were studied within the range of 3–7. When studying the effects of initial metal concentrations, the highest experimental removal yields achieved for Cu²⁺, Ni²⁺ and Cd²⁺ ions were 97.10, 50.94 and 64.61 %, respectively. The maximum biosorption capacities obtained by the Langmuir isotherm model for the biosorptions of Cu²⁺, Ni²⁺ and Cd²⁺ ions by alginate-immobilised C. sorokiniana were found to be 179.90, 86.49 and 164.50 mg/g biosorbent, respectively. The experimental data followed pseudo-second-order kinetics. At an initial metal concentration of 25 mg/L, immobilised algae could be used in at least 5 successive biosorption–desorption cycles. SEM and EDS analyses revealed that the metals bonded to the biosorbent. Bi- and multi-metal systems of Cu²⁺, Ni²⁺ and Cd²⁺ were investigated at initial metal concentrations of 30, 50 and 100 mg/L. The removal of Cd²⁺ as well as Ni²⁺ in such systems was negatively affected by the presence of Cu²⁺. The removal efficiency for Cu²⁺ in multi-metal systems decreased by 5–7 %, whilst in the cases of Cd²⁺ and Ni²⁺ the efficiencies decreased by up to 30 %. Nevertheless, the results obtained show that alginate-immobilised C. sorokiniana can efficiently remove the metals tested from polluted drinking water sources.  相似文献   

Comparative study of the absorptive potential of raw and activated carbon <Emphasis Type="Italic">Acacia nilotica</Emphasis> for Reactive Black 5 dye     

Muhammad T. Amin  Abdulrahman A. Alazba 《Environmental Earth Sciences》2017,76(16):581

Acacia nilotica was used for the adsorption of Reactive Black 5 (RB5) dye from an aqueous solution. Both the raw and activated (with H₃PO₄) carbon forms of Acacia nilotica (RAN and ANAC, respectively) were used for comparison. Various parameters (including dye concentration, contact time, temperature, and pH) were optimized to obtain the maximum adsorption capacity. RAN and ANAC were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The maximum experimental adsorption capacities for RAN and ANAC were 34.79 and 41.01 mg g^?1, respectively, which agreed with the maximum adsorption capacities predicted by the Langmuir, Freundlich, and Dubinin–Radushkevich equilibrium isotherm models. The adsorption data of ANAC showed a good fit to the isotherm models based on the coefficient of determination (R ²): Langmuir type II (R ² = 0.99) > Freundlich (R ² = 0.9853) > Dubinin–Radushkevich (R ² = 0.9659). This result suggested monolayer adsorption of RB5 dye. The adsorption of RB5 dye followed pseudo-second-order kinetics. The RAN adsorbent reflected an exothermic reaction (enthalpy change, ΔH = ?0.006 kJ mol^?1) and increased randomness (standard entropy change, ΔS = 0.038 kJ mol^?1) at the solid–solution interface. In contrast, ANAC reflected both exothermic [?0.011 kJ mol^?1 (303–313 K)] and endothermic [0.003 kJ mol^?1 (313–323 K)] reactions. However, the ΔS value of ANAC was lower when the RB5 adsorption increased from 313 to 323 K. The negative values for the Gibbs free energy change at all temperatures indicated that the adsorption of RB5 dye onto RAN and ANAC was spontaneous in the forward direction.  相似文献   

Toxinogenicity and cytotoxicity of <Emphasis Type="Italic">Alternaria,Aspergillus</Emphasis> and <Emphasis Type="Italic">Penicillium</Emphasis> moulds isolated from working environments     

J. Skóra  M. Sulyok  A. Nowak  A. Otlewska  B. Gutarowska 《International Journal of Environmental Science and Technology》2017,14(3):595-608

There is currently limited research available on the secondary metabolites of moulds in workplaces. The aim of this study was to determine the mould contamination in museums (N = 4), composting plants (N = 4) and tanneries (N = 4) and the secondary metabolite profiles of Alternaria, Aspergillus and Penicillium isolates from these workplaces. Alternaria, Aspergillus and Penicillium species were identified using the ITS1/2 sequence of the rDNA region. Mould metabolites were quantitatively analysed on standard laboratory medium and mineral medium containing materials specific to each workplace using liquid chromatography-mass spectrometry. We also examined the cytotoxicity of the moulds using MTT (3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazolium bromide) assays. Air microbiological contamination analyses showed a number of microorganisms, ranging from 2.4 × 10³ CFU m^?3 (composting plants) to 6.8 × 10⁴ CFU m^?3 (tanneries). We identified high percentages of Alternaria, Aspergillus and Penicillium moulds (air 57–59%, surfaces 10–65%) in all workplaces. The following moulds were the most cytotoxic (>90%): Alternaria alternata, A. limoniasperae, Aspergillus flavus, Penicillium biourgeianum, P. commune and P. spinulosum. The same mould species isolated from different working environments exhibited varying toxigenic and cytotoxic properties. Modifying the culture medium to simulate environmental conditions most often resulted in the inhibition of secondary metabolite production. Moulds isolated from the working environments produced the following mycotoxins (ng g^?1): chanoclavines (0.28–204), cyclopiazonic acid (27.1–1045), fumigaclavines (0.33–10,640,000), meleagrin (0.57–13,393), roquefortins (0.01–16,660), rugulovasines (112–220), viridicatin (0.12–957), viridicatol (4.23–2753) and quinocitrinines (0.07–1104), which may have a negative impact on human health.  相似文献   

Theoretical investigations of the local structures and the <Emphasis Type="Italic">g</Emphasis> factors for 3d<Superscript>9</Superscript> ions in CdS     

S. Y. Wu  H. M. Zhang  H. N. Dong  X. F. Wang  Y. X. Hu 《Physics and Chemistry of Minerals》2009,36(9):483-487

The local structures and the g factors g _// and g _⊥ for the isoelectronic 3d⁹ ions Cu²⁺ and Ni⁺ in CdS are theoretically investigated from the perturbation formulas of these parameters for a 3d⁹ ion under trigonally distorted tetrahedral environments. In consideration of significant covalency of the [MS₄] combinations (M = Cu and Ni), the ligand orbital and spin–orbit coupling contributions are taken into account using the cluster approach. Based on the studies, the substitutional impurity Cu²⁺ (or Ni⁺) on Cd²⁺ site is found to undergo a small inward displacement 0.026 Å (or a slight outward shift 0.017 Å) towards (or away from) the ligand triangle along C ₃ axis. The theoretical g factors for both ions based on the above impurity displacements are in good agreement with the experimental data.  相似文献   

H-bonding scheme and cation partitioning in axinite: a single-crystal neutron diffraction and Mössbauer spectroscopic study     

G. Diego Gatta  Günther J. Redhammer  Alessandro Guastoni  Giorgio Guastella  Martin Meven  Alessandro Pavese 《Physics and Chemistry of Minerals》2016,43(5):341-352

The crystal chemistry of a ferroaxinite from Colebrook Hill, Rosebery district, Tasmania, Australia, was investigated by electron microprobe analysis in wavelength-dispersive mode, inductively coupled plasma–atomic emission spectroscopy (ICP–AES), ⁵⁷Fe Mössbauer spectroscopy and single-crystal neutron diffraction at 293 K. The chemical formula obtained on the basis of the ICP–AES data is the following: \( ^{X1,X2} {\text{Ca}}_{4.03} \,^{Y} \left( {{\text{Mn}}_{0.42} {\text{Mg}}_{0.23} {\text{Fe}}^{2 + }_{1.39} } \right)_{\varSigma 2.04} \,^{Z1,Z2} \left( {{\text{Fe}}^{3 + }_{0.15} {\text{Al}}_{3.55} {\text{Ti}}_{0.12} } \right)_{\varSigma 3.82} \,^{T1,T2,T3,T4} \left( {{\text{Ti}}_{0.03} {\text{Si}}_{7.97} } \right)_{\varSigma 8} \,^{T5} {\text{B}}_{1.96} {\text{O}}_{30} \left( {\text{OH}} \right)_{2.18} \). The ⁵⁷Fe Mössbauer spectrum shows unambiguously the occurrence of Fe²⁺ and Fe³⁺ in octahedral coordination only, with Fe²⁺/Fe³⁺ = 9:1. The neutron structure refinement provides a structure model in general agreement with the previous experimental findings: the tetrahedral T1, T2, T3 and T4 sites are fully occupied by Si, whereas the T5 site is fully occupied by B, with no evidence of Si at the T5, or Al or Fe³⁺ at the T1–T5 sites. The structural and chemical data of this study suggest that the amount of B in ferroaxinite is that expected from the ideal stoichiometry: 2 a.p.f.u. (for 32 O). The atomic distribution among the X1, X2, Y, Z1 and Z2 sites obtained by neutron structure refinement is in good agreement with that based on the ICP–AES data. For the first time, an unambiguous localization of the H site is obtained, which forms a hydroxyl group with the oxygen atom at the O16 site as donor. The H-bonding scheme in axinite structure is now fully described: the O16–H distance (corrected for riding motion effect) is 0.991(1) Å and an asymmetric bifurcated bonding configuration occurs, with O5 and O13 as acceptors [i.e. with O16···O5 = 3.096(1) Å, H···O5 = 2.450(1) Å and O16–H···O5 = 123.9(1)°; O16···O13 = 2.777(1) Å, H···O13 = 1.914(1) Å and O16–H···O13 = 146.9(1)°].  相似文献   

Synthesis,TEM characterization and thermal behaviour of LiNiSi<Subscript>2</Subscript>O<Subscript>6</Subscript> pyroxene     

Mario Tribaudino  Geoffrey Bromiley  Haruo Ohashi  Fabrizio Nestola 《Physics and Chemistry of Minerals》2009,36(9):527-536

A pyroxene with composition LiNiSi₂O₆ was synthesized at T = 1,473 K and P = 2.0 GPa; the cell parameters at T = 298 K are a = 9.4169(6) Å, b = 8.4465(7) Å, c = 5.2464(3) Å, β = 110.534(6)°, V = 390.78(3) Å³. TEM examination of the LiNiSi₂O₆ pyroxene showed the presence of h + k odd reflections indicative of a primitive lattice, and of antiphase domains obtained by dark field imaging of the h + k odd reflections. A HT in situ investigation was performed by examining TEM selected area diffraction patterns collected at high temperature and synchrotron radiation powder diffraction. In HTTEM the LiNiSi₂O₆ was examined together with LiCrSi₂O₆ pyroxene. In LiCrSi₂O₆ the h + k odd critical reflections disappear at about 340 K; they are sharp up to the transition temperature and do not change their shape until they disappear. In LiNiSi₂O₆ the h + k odd reflections are present up to sample deterioration at 650 K. A high temperature synchrotron radiation powder diffraction investigation was performed on LiNiSi₂O₆ between 298 and 773 K. The analysis of critical reflections and of changes in cell parameters shows that the space group is P-centred up to the highest temperature. The comparative analysis of the thermal and spontaneous strain contributions in P2₁/c and C2/c pyroxenes indicates that the high temperature strain in P-LiNiSi₂O₆ is very similar to that due to thermal strain only in C2/c spodumene and that a spontaneous strain contribution related to pre-transition features is not apparent in LiNiSi₂O₆. A different high-temperature behaviour in LiNiSi₂O₆ with respect to other pyroxenes is suggested, possibly in relation with the presence of Jahn–Teller distortion of the M1 polyhedron centred by low-spin Ni³⁺.  相似文献   

Polymorphism of the hydroxide perovskite Ga(OH)<Subscript>3</Subscript> and possible proton-driven transformational behaviour     

M. D. Welch  A. K. Kleppe 《Physics and Chemistry of Minerals》2016,43(7):515-526

  相似文献   

High-pressure phase transitions of CaRhO<Subscript>3</Subscript> perovskite     

Yuichi Shirako  Hiroshi Kojitani  Masaki Akaogi  Kazunari Yamaura  Eiji Takayama-Muromachi 《Physics and Chemistry of Minerals》2009,36(8):455-462

High-pressure phase transitions of CaRhO₃ perovskite were examined at pressures of 6–27 GPa and temperatures of 1,000–1,930°C, using a multi-anvil apparatus. The results indicate that CaRhO₃ perovskite successively transforms to two new high-pressure phases with increasing pressure. Rietveld analysis of powder X-ray diffraction data indicated that, in the two new phases, the phase stable at higher pressure possesses the CaIrO₃-type post-perovskite structure (space group Cmcm) with lattice parameters: a = 3.1013(1) Å, b = 9.8555(2) Å, c = 7.2643(1) Å, V _m  = 33.43(1) cm³/mol. The Rietveld analysis also indicated that CaRhO₃ perovskite has the GdFeO₃-type structure (space group Pnma) with lattice parameters: a = 5.5631(1) Å, b = 7.6308(1) Å, c = 5.3267(1) Å, V _m  = 34.04(1) cm³/mol. The third phase stable in the intermediate P, T conditions between perovskite and post-perovskite has monoclinic symmetry with the cell parameters: a = 12.490(3) Å, b = 3.1233(3) Å, c = 8.8630(7) Å, β = 103.96(1)°, V _m  = 33.66(1) cm³/mol (Z = 6). Molar volume changes from perovskite to the intermediate phase and from the intermediate phase to post-perovskite are –1.1 and –0.7%, respectively. The equilibrium phase relations determined indicate that the boundary slopes are large positive values: 29 ± 2 MPa/K for the perovskite—intermediate phase transition and 62 ± 6 MPa/K for the intermediate phase—post-perovskite transition. The structural features of the CaRhO₃ intermediate phase suggest that the phase has edge-sharing RhO₆ octahedra and may have an intermediate structure between perovskite and post-perovskite.  相似文献   

Pressure induced phase transition in Pb<Subscript>6</Subscript>Bi<Subscript>2</Subscript>S<Subscript>9</Subscript>     

L. A. Olsen  K. Friese  E. Makovicky  T. Balić-Žunić  W. Morgenroth  A. Grzechnik 《Physics and Chemistry of Minerals》2011,38(1):1-10

The crystal structure of Pb₆Bi₂S₉ is investigated at pressures between 0 and 5.6 GPa with X-ray diffraction on single-crystals. The pressure is applied using diamond anvil cells. Heyrovskyite (Bbmm, a = 13.719(4) Å, b = 31.393(9) Å, c = 4.1319(10) Å, Z = 4) is the stable phase of Pb₆Bi₂S₉ at ambient conditions and is built from distorted moduli of PbS-archetype structure with a low stereochemical activity of the Pb²⁺ and Bi³⁺ lone electron pairs. Heyrovskyite is stable until at least 3.9 GPa and a first-order phase transition occurs between 3.9 and 4.8 GPa. A single-crystal is retained after the reversible phase transition despite an anisotropic contraction of the unit cell and a volume decrease of 4.2%. The crystal structure of the high pressure phase, β-Pb₆Bi₂S₉, is solved in Pna2 ₁ (a = 25.302(7) Å, b = 30.819(9) Å, c = 4.0640(13) Å, Z = 8) from synchrotron data at 5.06 GPa. This structure consists of two types of moduli with SnS/TlI-archetype structure in which the Pb and Bi lone pairs are strongly expressed. The mechanism of the phase transition is described in detail and the results are compared to the closely related phase transition in Pb₃Bi₂S₆ (lillianite).  相似文献   

On the crystal chemistry and elastic behavior of a phlogopite 3<Emphasis Type="Italic">T</Emphasis>     

G. D. Gatta  Marco Merlini  Nicola Rotiroti  Nadia Curetti  Alessandro Pavese 《Physics and Chemistry of Minerals》2011,38(8):655-664

The crystal chemistry and the elastic behavior under isothermal conditions up to 9 GPa of a natural, and extremely rare, 3T-phlogopite from Traversella (Valchiusella, Turin, Western Alps) [(K_0.99Na_0.05Ba_0.01)(Mg_2.60Al_0.20Fe _0.21 ²⁺ )[Si_2.71Al_1.29O₁₀](OH)₂, space group P3₁12, with a = 5.3167(4), c = 30.440(2) Å, and V = 745.16(9) ų] have been investigated by electron microprobe analysis in wavelength dispersion mode, single-crystal X-ray diffraction at 100 K, and in situ high-pressure synchrotron radiation powder diffraction (at room temperature) with a diamond anvil cell. The single-crystal refinement confirms the general structure features expected for trioctahedral micas, with the inter-layer site partially occupied by potassium and sodium, iron almost homogeneously distributed over the three independent octahedral sites, and the average bond distances of the two unique tetrahedra suggesting a disordered Si/Al-distribution (i.e., 〈T1-O〉 ~ 1.658 and 〈T2-O〉 ~ 1.656 Å). The location of the H-site confirms the orientation of the O–H vector nearly perpendicular to (0001). The refinement converged with R ₁(F) = 0.0382, 846 unique reflections with F _O > 4σ(F _O) and 61 refined parameters, and not significant residuals in the final difference-Fourier map of the electron density (+0.77/?0.37 e ^?/ų). The high-pressure experiments showed no phase transition within the pressure range investigated. The P–V data were fitted with a Murnaghan (M-EoS) and a third-order Birch-Murnaghan equation of state (BM-EoS), yielding: (1) M-EoS, V ₀ = 747.0(3) ų, K _T0 = 44.5(24) GPa, and K′ = 8.0(9); (2) BM-EoS, V ₀ = 747.0(3) ų, K _T0 = 42.8(29) GPa, and K′ = 9.9(17). A comparison between the elastic behavior in response to pressure observed in 1M- and 3T-phlogopite is made.  相似文献   

Formation of one-dimensional composites of poly(<Emphasis Type="Italic">m</Emphasis>-phenylenediamine)s based on <Emphasis Type="Italic">Streptomyces</Emphasis> for adsorption of hexavalent chromium     

L. Y. Chai  X. Wang  H. Y. Wang  W. C. Yang  Q. Liao  Y. J. Wu 《International Journal of Environmental Science and Technology》2018,15(7):1411-1422

Here, a novel one-dimensional composite of poly(m-phenylenediamine)s coating on filamentous Streptomyces was successfully constructed via a controllable polymerization reaction. The synthesized composites were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. Their adsorption isotherm and kinetics for aqueous hexavalent chromium were also systematically examined. The results of scanning electron microscopy analysis indicated that the obtained composites based on Streptomyces were showed a uniform and stable one-dimensional morphology with distinct core–shell configuration. Moreover, the Langmuir isotherm model (R ² > 0.96) and pseudo-second-order equation (R ² = 0.9996) described well the equilibrium adsorption behavior and kinetics of hexavalent chromium adsorption by the composites. In addition, bath adsorption experiments demonstrated the highest adsorption capacity of hexavalent chromium by the composites reached 320.03 mg g^?1 in an acid solution, which was 5.6 times as that of the pure Streptomyces filaments. The results of Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analyses suggested that the adsorption of hexavalent chromium by the composites possibly involved the protonation, redox, and chelation reactions. Therefore, a promising application of these composites in treating acid hexavalent chromium-contaminated wastewater is expectable.  相似文献   

Adsorption of methylene blue and crystal violet on low-cost adsorbent: waste fruits of <Emphasis Type="Italic">Rapanea ferruginea</Emphasis> (ethanol-treated and H<Subscript>2</Subscript>SO<Subscript>4</Subscript>-treated)     

Tamiris Chahm  Bruna Aparecida Martins  Clovis Antonio Rodrigues 《Environmental Earth Sciences》2018,77(13):508

This study assesses the ability of two low-cost adsorbents made from waste of Rapanea ferruginea treated with ethanol (WRf) and its H₂SO₄-treated analog (WRf/H₂SO₄) for the removal of two cationic dyes methylene blue (MB) and crystal violet (CV) from aqueous solutions. The adsorbent was characterized by scanning electron microscopy, Fourier transform infrared spectrometry, thermogravimetric analysis, point of zero charge (pH_pzc), specific surface, and functional groups. The adsorption of dye onto the adsorbents was studied as a function of pH solution (2–12), contact time (up to 120 min) and initial concentration (20–120 mg/L), and temperature (25, 35, and 55 °C). The influence of these parameters on adsorption capacity was studied using the batch process. The response surface methodology (RSM) was used in the experimental design, modeling of the process, and optimizing of the variables and was optimized by the response involving Box–Behnken factorial design (15 runs). The results show that the data correlated well with the Sips isotherm. The maximum adsorption capacities of MB and CV onto WRf were found to be 69 and 106 mg/g, and onto WRf/H₂SO₄, the adsorption capacities were 33 and 125 mg/g, respectively. The kinetic data revealed that adsorption of cationic dyes onto the adsorbents closely follows the pseudo-second-order kinetic model. Regression analysis showed good fit of the experimental data to the second-order polynomial model, with coefficient of determination (R²) values for MB (R²?=?0.9685) and MB (R²?=?0.9832) for WRf and CV (R²?=?0.9685) and CV (R²?=?0.9832) for WRf/H₂SO₄ indicated that regression analysis is able to give a good prediction of response for the adsorption process in the range studied. The results revealed that waste from R. ferruginea is potentially an efficient and low-cost adsorbent for adsorption of MB and CV.  相似文献   

Adsorption study on municipal solid waste leachate using <Emphasis Type="Italic">Moringa oleifera</Emphasis> seed     

D.?SivakumarEmail author 《International Journal of Environmental Science and Technology》2013,10(1):113-124

Effects of initial concentrations of Moringa oleifera seed coagulant for removing Chemical Oxygen Demand and Total Dissolved Solids from municipal solid waste leachate have been evaluated at an optimum pH of 7 and temperature of 318 K. The kinetic data obtained from the experiments were fitted to the pseudo first-order, pseudo second-order, Elovich and intraparticle diffusion models. Based on a regression coefficient (R ²), the equilibrium (kinetic) data were best fitted with the Elovich model (R ² = 0.993 for Chemical Oxygen Demand and R ² = 0.996 for Total Dissolved Solids) than that of other models. The results of the kinetic models study indicated that the adsorption capacity of M. oleifera seed as a coagulant for removing Chemical Oxygen Demand and Total Dissolved Solids in a leachate increased up to 100 mg L^?1, beyond which the adsorption capacity got reduced. Finally, the present study concluded that M. oleifera seed coagulant could be employed effectively for the removal of Chemical Oxygen Demand and Total Dissolved Solids in a municipal solid waste leachate.  相似文献   

Chromium solubility in anhydrous Phase B     

Luca Bindi  Ekaterina A. Sirotkina  Andrey V. Bobrov  Fabrizio Nestola  Tetsuo Irifune 《Physics and Chemistry of Minerals》2016,43(2):103-110

The crystal structure and chemical composition of a crystal of (Mg_14?x Cr _x )(Si_5?x Cr _x )O₂₄ (x ≈ 0.30) anhydrous Phase B (Anh-B) synthesized in the model system MgCr₂O₄–Mg₂SiO₄ at 12 GPa and 1600 °C have been investigated. The compound was found to be orthorhombic, space group Pmcb, with lattice parameters a = 5.900(1), b = 14.218(2), c = 10.029(2) Å, V = 841.3(2) Å³ and Z = 2. The structure was refined to R ₁ = 0.065 using 1492 independent reflections. Chromium was found to substitute for both Mg at the M3 site (with a mean bond distance of 2.145 Å) and Si at the octahedral Si1 site (mean bond distance: 1.856 Å), according to the reaction Mg²⁺ + Si⁴⁺ = 2Cr³⁺. Such substitutions cause a reduction in the volume of the M3 site and an increase in the volume of the Si-dominant octahedron with respect to the values typically observed for pure Anh-B and Fe²⁺-bearing Anh-B. Taking into account that Cr³⁺ is not expected to be Jahn–Teller active, it appears that both the Cr³⁺–for–Mg and Cr³⁺–for–Si substitutions in the Anh-B structure decrease the distortion of the octahedra. Electron microprobe analysis gave the Mg_13.66(8)Si_4.70(6)Cr_0.62(4)O₂₄ stoichiometry for the studied phase. The successful synthesis of this phase provides new information for the possible mineral assemblages occurring in the Earth’s deep upper mantle and shed new light on the so-called X discontinuity that has been observed at 275–345 km depth in several subcontinental and subduction zone environments.  相似文献   

Thermoelastic properties of chromium oxide Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> (eskolaite) at high pressures and temperatures     

Anna M. Dymshits  Peter I. Dorogokupets  Igor S. Sharygin  Konstantin D. Litasov  Anton Shatskiy  Sergey V. Rashchenko  Eiji Ohtani  Akio Suzuki  Yuji Higo 《Physics and Chemistry of Minerals》2016,43(6):447-458

A new synchrotron X-ray diffraction study of chromium oxide Cr₂O₃ (eskolaite) with the corundum-type structure has been carried out in a Kawai-type multi-anvil apparatus to pressure of 15 GPa and temperatures of 1873 K. Fitting the Birch–Murnaghan equation of state (EoS) with the present data up to 15 GPa yielded: bulk modulus (K _0,T0), 206 ± 4 GPa; its pressure derivative K′_0,T , 4.4 ± 0.8; (?K _0,T /?T) = ?0.037 ± 0.006 GPa K^?1; a = 2.98 ± 0.14 × 10^?5 K^?1 and b = 0.47 ± 0.28 × 10^?8 K^?2, where α _0,T  = a + bT is the volumetric thermal expansion coefficient. The thermal expansion of Cr₂O₃ was additionally measured at the high-temperature powder diffraction experiment at ambient pressure and α _0,T0 was determined to be 2.95 × 10^?5 K^?1. The results indicate that coefficient of the thermal expansion calculated from the EoS appeared to be high-precision because it is consistent with the data obtained at 1 atm. However, our results contradict α ₀ value suggested by Rigby et al. (Brit Ceram Trans J 45:137–148, 1946) widely used in many physical and geological databases. Fitting the Mie–Grüneisen–Debye EoS with the present ambient and high-pressure data yielded the following parameters: K _0,T0 = 205 ± 3 GPa, K′_0,T  = 4.0, Grüneisen parameter (γ ₀) = 1.42 ± 0.80, q = 1.82 ± 0.56. The thermoelastic parameters indicate that Cr₂O₃ undergoes near isotropic compression at room and high temperatures up to 15 GPa. Cr₂O₃ is shown to be stable in this pressure range and adopts the corundum-type structure. Using obtained thermoelastic parameters, we calculated the reaction boundary of knorringite formation from enstatite and eskolaite. The Clapeyron slope (with \({\text{d}}P/{\text{d}}T = - 0.014\) GPa/K) was found to be consistent with experimental data.  相似文献   

Stability at high-pressure,elastic behaviour and pressure-induced structural evolution of CsAlSi<Subscript>5</Subscript>O<Subscript>12</Subscript>, a potential host for nuclear waste     

G. Diego Gatta  Nicola Rotiroti  Martin Fisch  Milen Kadiyski  Thomas Armbruster 《Physics and Chemistry of Minerals》2008,35(9):521-533

The elastic and structural behaviour of the synthetic zeolite CsAlSi₅O₁₂ (a = 16.753(4), b = 13.797(3) and c = 5.0235(17) Å, space group Ama2, Z = 2) were investigated up to 8.5 GPa by in situ single-crystal X-ray diffraction with a diamond anvil cell under hydrostatic conditions. No phase-transition occurs within the P-range investigated. Fitting the volume data with a third-order Birch–Murnaghan equation-of-state gives: V ₀ = 1,155(4) ų, K _T0 = 20(1) GPa and K′ = 6.5(7). The “axial moduli” were calculated with a third-order “linearized” BM-EoS, substituting the cube of the individual lattice parameter (a ³, b ³, c ³) for the volume. The refined axial-EoS parameters are: a ₀ = 16.701(44) Å, K _T0a = 14(2) GPa (β_a = 0.024(3) GPa^?1), K′ _a = 6.2(8) for the a-axis; b ₀ = 13.778(20) Å, K _T0b = 21(3) GPa (β_b = 0.016(2) GPa^?1), K′ _b = 10(2) for the b-axis; c ₀ = 5.018(7) Å, K _T0c = 33(3) GPa (β_c = 0.010(1) GPa^?1), K′ _c = 3.2(8) for the c-axis (K _T0a:K _T0b:K _T0c = 1:1.50:2.36). The HP-crystal structure evolution was studied on the basis of several structural refinements at different pressures: 0.0001 GPa (with crystal in DAC without any pressure medium), 1.58(3), 1.75(4), 1.94(6), 3.25(4), 4.69(5), 7.36(6), 8.45(5) and 0.0001 GPa (after decompression). The main deformation mechanisms at high-pressure are basically driven by tetrahedral tilting, the tetrahedra behaving as rigid-units. A change in the compressional mechanisms was observed at P ≤ 2 GPa. The P-induced structural rearrangement up to 8.5 GPa is completely reversible. The high thermo-elastic stability of CsAlSi₅O_12, the immobility of Cs at HT/HP-conditions, the preservation of crystallinity at least up to 8.5 GPa and 1,000°C in elastic regime and the extremely low leaching rate of Cs from CsAlSi₅O₁₂ allow to consider this open-framework silicate as functional material potentially usable for fixation and deposition of Cs radioisotopes.  相似文献   

Functional Performance of Three Invasive <Emphasis Type="Italic">Marenzelleria</Emphasis> Species Under Contrasting Ecological Conditions Within the Baltic Sea     

Cintia O. Quintana  Caroline Raymond  Francisco J. A. Nascimento  Stefano Bonaglia  Stefan Forster  Jonas S. Gunnarsson  Erik Kristensen 《Estuaries and Coasts》2018,41(6):1766-1781

A 4-week laboratory experiment investigated the behaviour (survival and bioirrigation) and impact of the invasive polychaetes Marenzelleria viridis, M. neglecta and M. arctia on sediment-water solutes exchange, porewater chemistry, and Fe and P interactions in high-salinity sandy sediment (HSS) and low-salinity muddy sediment (LSM) from the Baltic Sea. M. viridis showed deep burrowing with efficient bioirrigation (11 L m^?2 day^?1) and high survival (71%) in HSS, while M. arctia exhibited shallow burrowing with high bioirrigation (12 L m^?2 day^?1) and survival (88%) in LSM. M. neglecta behaved poorly in both ecological settings (bioirrigation, 5–6 L m^?2 day^?1; survival, 21–44%). The deep M. viridis bioirrigation enhanced total microbial CO₂ (TCO₂) production in HSS by 175% with a net efflux of NH₄⁺ and PO₄^3?, at rates 3- to 27-fold higher than for the other species. Although the shallow and intense bioirrigation of M. arctia in LSM stimulated microbial TCO₂ production to some extent (61% enhancement), the nutrient fluxes close to zero indicate that it effectively prevented the P release. Porewater Fe:PO₄^3? ratios revealed that the oxidizing effect of M. arctia bioirrigation increased the PO₄^3? adsorption capacity of LSM twofold relative to defaunated controls while no buffering of PO₄^3? was detected in M. viridis HSS treatment. Therefore, the different behaviour of the three species in various environments and the sharp contrast between M. viridis and M. arctia effects on C, N and P cycling must be considered carefully when the ecological role of Marenzelleria species in the Baltic Sea is evaluated.  相似文献   

Dewatering Behaviour of a Uranium Ore Slurry Containing Clays     

Maki Ito  Shahid Azam 《Geotechnical and Geological Engineering》2017,35(6):2549-2569

The main objective of this paper was to investigate the dewatering behaviour of a clayey uranium ore slurry. The slurry (containing 28% clay size) exhibited moderate water adsorption (w _l  = 83% and w _p  = 30%). Primarily composed of muscovite (46%) and quartz (30%), the clay minerals included illite (8%), chlorite (5%) and kaolinite (2%) alongside a CEC of 41 (cmol(+)/kg) with Ca²⁺ and Mg²⁺ as the dominant cations. Likewise, the high EC (17,600 μS/cm) and ionic strength (1.15 mol/L) indicated a flocculated microstructure due to the presence of SO₄ ^2? (22,600 mg/L) and Mg²⁺ (1340 mg/L) in the slurry water. Settling included sedimentation and consolidation at low initial solids condition (25–35%) whereas only consolidation was observed at high initial solids contents (40–50%). The average k reduced from 1.2 × 10^?6 m/s (initial s = 25%) to 5.3 × 10^?8 m/s (initial s = 50%) along with a void ratio reduction from 7.4 to 2.6. Due to thixotropic strength, volume compressibility during consolidation showed apparent pre-consolidation at low effective stress (0.3–2 kPa) with a reduction in void ratio from 2.6 to 2.5. The e _s was found to be 2.46 at σ′ = 2 kPa and was followed by a steeper slope with the void ratio reducing to 2.1 at σ′ = 31 kPa. Likewise, the hydraulic conductivity during consolidation decreased from 2.6 × 10^?9 m/s (at e = 2.6) to 2.0 × 10^?10 m/s (at e = 2.1).  相似文献   

Biosorption an innovative tool for bioremediation of metal-contaminated municipal solid waste leachate: optimization and mechanisms exploration     

A. K. Awasthi  A. K. Pandey  J. Khan 《International Journal of Environmental Science and Technology》2017,14(4):729-742

Municipal solid waste poses a risk on surrounding environment and public health, mainly because of unscientific disposal and shortage of facilities for proper handling and recycling of leachate. This research article objective is to pinpoint the indigenous fungal isolates of waste leachate samples. Therefore, we carried out biosorption of Cd²⁺ tested the applicability by applying indigenous fungal isolates. The limited number of fungal isolates was found based on their ability for biosorption of Cd²⁺ metal. The fungal strains Trichoderma sp., Aspergillus niger and Aspergillus flavus were reported as potential strains for metal exclusion ability from the leachate. Among them, the Trichoderma sp. was found as excellent fungal agent for Cd²⁺ absorption. The optimum pH was 5.5 ± 1, temperature 45 °C, and spore concentration 10^?5 to achieve the maximum biosorption, and 35 days of incubation period were required by three strains. The maximum metal biosorption achieved was comparable for the three isolates: 56.34% by Trichoderma sp., 44.74 and 42.04% by A. niger and A. flavus, respectively. Concluding, the further intending application to identified potentially fungal isolates is able to improve the efficiency of metal biosorption. These strains are recommended for development of consortia could become a best technique for MSW leachate treatment if its reliability and applicability should be verified prior to technology acceptance.  相似文献