首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 48 毫秒
1.
Three-dimensional (3D) district-scale geoscience information for the Luanchuan Mo district was integrated for understanding the development of its regional geology and ore-forming processes and for decision-making about potential targets for mineral exploration. The methodology and datasets used were: (1) construction of an initial geological model (25 km × 20 km × 2.5 km) using 1:10,000 scale geological map, nine geological cross-sections and gravity and magnetic data; (2) construction of three large-scale Mo deposits model (5 km × 4 km × 2.5 km) using 1:2000 scale geological and topographic maps, 288 boreholes (total core length of 158,700 m), and 32 1:2000 scale cross-sections; (3) 3D inversion of 1:25,000 scale gravity and magnetic data for identification metallogenic anomaly zones which are associated with Jurassic intrusions; (4) extraction of ore-controlling formation and sequence of the Luanchuan Group using the large-scale 3D models of Mo deposits and results of analysis of lithogeochemical samples from outcrops and borehole cores; (5) identification of ore-forming and ore-controlling faults using the large-scale 3D model of Mo deposits and mineralized Jurassic granite porphyry stocks; (6) boost weights-of-evidence and concentration–volume (C–V) fractal analyses to integrate metallogenic information and to identify and classify potential Mo targets. Four classes of exploration targets were identified using C–V modeling and 3D known orebodies model: the first and second class targets are mainly located in three large magma-skarn type deposit camps, occupying ~ 1.4 km3 with total estimated reserve of ~ 2.3 Mt; the third class targets, which are mainly located in Huangbeiling and Yuku deposit camps comprising concealed magma-skarn type deposits, occupy ~ 2.8 km3 and represent a new target exploration zone in the Luanchuan district; the fourth class targets, which are located in the Huoshenmiao, Majuan, and Daping zones, occupy ~ 15 km3 and represent potential mineral resources with likely similar orebody features as the Yuku deposit.  相似文献   

2.
The Northern Norrbotten Ore Province in northernmost Sweden includes the type localities for Kiruna-type apatite iron deposits and has been the focus for intense exploration and research related to Fe oxide-Cu-Au mineralisation during the last decades. Several different types of Fe-oxide and Cu-Au ± Fe oxide mineralisation occur in the region and include: stratiform Cu ± Zn ± Pb ± Fe oxide type, iron formations (including BIF's), Kiruna-type apatite iron ore, and epigenetic Cu ± Au ± Fe oxide type which may be further subdivided into different styles of mineralisation, some of them with typical IOCG (Iron Oxide-Copper-Gold) characteristics. Generally, the formation of Fe oxide ± Cu ± Au mineralisation is directly or indirectly dated between ~ 2.1 and 1.75 Ga, thus spanning about 350 m.y. of geological evolution.The current paper will present in more detail the characteristics of certain key deposits, and aims to put the global concepts of Fe-oxide Cu-Au mineralisations into a regional context. The focus will be on iron deposits and various types of deposits containing Fe-oxides and Cu-sulphides in different proportions which generally have some characteristics in common with the IOCG style. In particular, ore fluid characteristics (magmatic versus non-magmatic) and new geochronological data are used to link the ore-forming processes with the overall crustal evolution to generate a metallogenetic model.Rift bounded shallow marine basins developed at ~ 2.1–2.0 Ga following a long period of extensional tectonics within the Greenstone-dominated, 2.5–2.0 Ga Karelian craton. The ~ 1.9–1.8 Ga Svecofennian Orogen is characterised by subduction and accretion from the southwest. An initial emplacement of calc-alkaline magmas into ~ 1.9 Ga continental arcs led to the formation of the Haparanda Suite and the Porphyrite Group volcanic rocks. Following this early stage of magmatic activity, and separated from it by the earliest deformation and metamorphism, more alkali-rich magmas of the Perthite Monzonite Suite and the Kiirunavaara Group volcanic rocks were formed at ~ 1.88 Ga. Subsequently, partial melting of the middle crust produced large volumes of ~ 1.85 and 1.8 Ga S-type granites in conjunction with subduction related A −/I-type magmatism and associated deformation and metamorphism.In our metallogenetic model the ore formation is considered to relate to the geological evolution as follows. Iron formations and a few stratiform sulphide deposits were deposited in relation to exhalative processes in rift bounded marine basins. The iron formations may be sub-divided into BIF- (banded iron formations) and Mg-rich types, and at several locations these types grade into each other. There is no direct age evidence to constrain the deposition of iron formations, but stable isotope data and stratigraphic correlations suggest a formation within the 2.1–2.0 Ga age range. The major Kiruna-type ores formed from an iron-rich magma (generally with a hydrothermal over-print) and are restricted to areas occupied by volcanic rocks of the Kiirunavaara Group. It is suggested here that 1.89–1.88 Ga tholeiitic magmas underwent magma liquid immiscibility reactions during fractionation and interaction with crustal rocks, including metaevaporites, generating more felsic magmatic rocks and Kiruna-type iron deposits. A second generation of this ore type, with a minor economic importance, appears to have been formed about 100 Ma later. The epigenetic Cu-Au ± Fe oxide mineralisation formed during two stages of the Svecofennian evolution in association with magmatic and metamorphic events and crustal-scale shear zones. During the first stage of mineralisation, from 1.89–1.88 Ga, intrusion-related (porphyry-style) mineralisation and Cu-Au deposits of IOCG affinity formed from magmatic-hydrothermal systems, whereas vein-style and shear zone deposits largely formed at c. 1.78 Ga.The large range of different Fe oxide and Cu-Au ± Fe oxide deposits in Northern Norrbotten is associated with various alteration systems, involving e.g. scapolite, albite, K feldspar, biotite, carbonates, tourmaline and sericite. However, among the apatite iron ores and the epigenetic Cu-Au ± Fe oxide deposits the character of mineralisation, type of ore- and alteration minerals and metal associations are partly controlled by stratigraphic position (i.e. depth of emplacement). Highly saline, NaCl + CaCl2 dominated fluids, commonly also including a CO2-rich population, appear to be a common characteristic feature irrespective of type and age of deposits. Thus, fluids with similar characteristics appear to have been active during quite different stages of the geological evolution. Ore fluids related to epigenetic Cu-Au ± Fe oxides display a trend with decreasing salinity, which probably was caused by mixing with meteoric water. Tentatively, this can be linked to different CuAu ore paragenesis, including an initial (magnetite)-pyrite-chalcopyrite stage, a main chalcopyrite stage, and a late bornite stage.Based on the anion composition and the Br/Cl ratio of ore related fluids bittern brines and metaevaporites (including scapolite) seem to be important sources to the high salinity hydrothermal systems generating most of the deposits in Norrbotten. Depending on local conditions and position in the crust these fluids generated a variety of Cu-Au deposits. These include typical IOCG-deposits (Fe-oxides and Cu-Au are part of the same process), IOCG of iron stone type (pre-existing Fe-oxide deposit with later addition of Cu-Au), IOCG of reduced type (lacking Fe-oxides due to local reducing conditions) and vein-style Cu-Au deposits. From a strict genetic point of view, IOCG deposits that formed from fluids of a mainly magmatic origin should be considered to be a different type than those deposits associated with mainly non-magmatic fluids. The former tend to overlap with porphyry systems, whereas those of a mainly non-magmatic origin overlap with sediment hosted Cu-deposits with respect to their origin and character of the ore fluids.  相似文献   

3.
On 21 March 2008, an Ms7.3 earthquake occurred at Yutian County, Xinjiang Uygur Autonomous Region, which is in the same year as 2008 Mw 7.9 Wenchuan earthquake. These two earthquakes both took place in the Bayar Har block, while Yutian earthquake is located in the west edge and Wenchuan earthquake is in the east. The research on source characteristics of Yutian earthquake can serve to better understand Wenchuan earthquake mechanism. We attempt to reveal the features of the causative fault of Yutian shock and its co-seismic deformation field by a sensitivity-based iterative fitting (SBIF) method. Our work is based on analysis and interpretation to high-resolution satellite (Quickbird) images as well as D-InSAR data from the satellite Envisat ASAR, in conjunction with the analysis of seismicity, focal mechanism solutions and active tectonics in this region. The result shows that the 22 km long, nearly NS trending surface rupture zone by this event lies on a range-front alluvial platform in the Qira County. It is characterized by distinct linear traces and a simple structure with 1–3 m-wide individual seams and maximum 6.5 m width of a collapse fracture. Along the rupture zone are seen many secondary fractures and fault-bounded blocks by collapse, exhibiting remarkable extension. The co-seismic deformation affected a big range 100 km × 40 km. D-InSAR analysis indicates that the interferometric deformation field is dominated by extensional faulting with a small strike-slip component. Along the causative fault, the western wall fell down and the eastern wall, that is the active unit, rose up, both with westerly vergence. The maximum subsidence displacement is ～2.6 m in the LOS, and the maximum uplift is 1.2 m. The maximum relative vertical dislocation reaches 4.1 m, which is 10 km distant from the starting rupture point to south. The 42 km-long seismogenic fault in the subsurface extends in NS direction as an arc, and it dipping angle changes from 70° near the surface to 52° at depth ～10 km. The slip on the fault plane is concentrated in the depth range 0–8 km, forming a belt of length 30 km along strike on the fault plane. There are three areas of concentrating slip, in which the largest slip is 10.5 m located at the area 10 km distant from the initial point of the rupture.  相似文献   

4.
The investigation area is located in the most southern part of Sinai Peninsula boarded from the west by the Gulf of Suez and from the east by the Gulf of Aqaba. The present study concerns the application of stacking and persistent scattering of SAR interferometry in order to monitor ground deformation in the southern part of Sharm El-Shiekh area. The specific techniques were applied in order to reduce the influence of atmospheric effects on the ground deformation estimates. For this purpose a total number of 26 ENVISAT ASAR scenes covering the period between 2003 and 2009 were processed and analyzed. Interferometric processing results show both patterns of uplift and downlift in the study area. Specifically an area along the coastline with a N–S direction, corresponding to the build up zone of Sharm El-Sheikh, shows annual average subsidence rates between 5 and 7 mm/yr along the line of sight (LOS). On the contrary, Sharm El-Maya, an inner zone, parallel to the above subsided area; shows maximum slant range uplift of 5 mm/yr. The obtained results of both stacking and persistent scattering indicate that the ground deformation in Sharm El-Sheikh–Ras Nasrani coastal zone is attributed to several effecting factors compromising water pumping, lithology, seismicity, and possible active fracture. The contribution of all these factors is discussed in the context.  相似文献   

5.
The Song Hien rift basin is an important metallogenic area in NE Vietnam. This domain consists mainly of Triassic sulfide-rich black shale beds, which play a role as a sedimentary host for various mineral systems such as antimony, mercury and gold-sulfide deposits. Most of gold deposits are hosted in carbonaceous sedimentary rocks, however some deposits, which have similar characteristics, are hosted in fine-grained mafic magmatic rocks. An Ar-Ar isotopic dating of hydrothermal sericite from the sedimentary hosted Bo Va and Khung Khoang gold deposits and intrusion hosted orogenic Hat Han gold deposit yields plateau ages of 184.8 ± 2.1 Ma, 211.63 ± 2.3 Ma, and 209.12 ± 2.3 Ma, respectively. The obtained Ar-Ar ages convincingly show that the orogenic gold deposits in the Song Hien domain were formed in Late Triassic to Early Jurassic, while the age of the Bo Va deposit is at least older than 184.8 ± 2.1 Ma. Loss of argon by volume diffusion, supported by previously reported mineralogical and isotopic features of the Bo Va deposit may suggest that the Jurassic-Cretaceous (Yanshanian) tectonothermal events overprinted some deposits in the Song Hien domain. Formation of gold deposits in the Song Hien domain is linked to the same tectonic event as the Carlin-like gold deposits in SW China and is associated with an extensional tectonic regime that followed continental collision between the Indochina and South China Blocks. The similarity in geology setting and mineral composition of gold deposits of the Song Hien domain and the Golden Triangle region, as well as timing and kinematics of deformation, magmatic features, and stratigraphic sequence and bulk architecture, lead to conclusion that NE Vietnam and SW China is a single metallogenic zone. The study of gold deposits in Vietnam will provide a new data on the metallogenic history of this important part of SE Asia.  相似文献   

6.
Cu-rich massive sulfide deposits associated with mafic–ultramafic rocks in the southern portion of the Main Urals Fault (MUF) are characterized by variable enrichments in Ni (up to 0.45 wt.%), Co (up to 10 wt.%) and Au (up to 16 ppm in individual hand-specimens). The Cu (Ni–Co)-rich composition of MUF deposits, as opposed to the Cu (Zn)-rich composition of more eastward massive sulfide deposits of broadly similar age along the western flank of the Magnitogorsk arc, reflects the abundance of seafloor-exposed, Ni–Co-rich ultramafic rocks in the most external portion of the Early-Devonian Magnitogorsk forearc. Morphological, textural, and compositional differences between individual deposits are interpreted to be the result of the sulfide deposition style and, in part, of the original subseafloor lithology. One deposit produced by dominantly on-seafloor hydrothermal processes is characterized by pyrite–marcasite ≫ pyrrhotite, not so low Zn grades (occasionally up to 2 wt.%), abundant clastic facies and periodical superficial oxidation. Deposits produced by dominantly subseafloor hydrothermal processes are characterized by pyrrhotite > pyrite, very low Zn (generally < to ≪ 0.1 wt.%), volumetrically minor clastic facies, and multi-layer deposit morphology. Very low Ni/Co ratios in the on-seafloor deposit may indicate a dominant metal contribution from a mafic rather than ultramafic source. The sulfide mineralization was associated with extensive hydrothermal alteration of the host ultramafic and mafic rocks, leading to formation of abundant talc, talc–carbonate and chlorite rocks. Occurrence of large volumes of such altered lithotypes in ophiolitic belts may be considered as a potential searching criteria for MUF-type (Cu, Co, Ni)-deposits. In spite of the contrasting geodynamic environment, geological, geochemical, textural and mineralogical peculiarities of the MUF deposits in many respects are similar to those of ultramafic-hosted massive sulfide deposits along the Mid-Atlantic Ridge. In geological time, supra subduction-zone settings appear to have been more effective than mid-ocean ridge settings for preservation of ultramafic-hosted massive sulfide deposits.  相似文献   

7.
Xincheng is a world-class orogenic-gold deposit hosted by the Early Cretaceous Guojialing granitoid in the Jiaodong Peninsula, eastern China. A zircon U–Pb age of 126 ± 1.4 Ma, together with previous data, constrain the emplacement of the Guojialing intrusion to 132–123 Ma. The granitoid underwent subsolidus ductile deformation at >500 °C following its intrusion. The small difference in age between the youngest zircon U–Pb age of unaltered granitoid (~123 Ma) and the ca. 120 Ma 40Ar/39Ar ages of sericite, associated with breccias and gold mineralization within it indicate initial rapid cooling from magmatic temperatures to those prevalent during brittle deformation and associated gold mineralization at ~220–300 °C. Evidence of a direct association between granitic magmatism and gold mineralization, such as at least localized near-magmatic depositional temperatures and metal zoning evident in undoubted intrusion-related gold deposits, is absent. The 40Ar/39Ar age of ~120 Ma coincides with the mineralization age of many other orogenic-gold deposits along the Jiaojia Fault. Sixteen zircon fission-track (ZFT) ages across the ore and alteration zones range from 112.9 ± 3.4 to 99.1 ± 2.7 Ma. The long period of cooling to the ~100 Ma ZFT closure temperatures recorded here suggests that ambient temperatures for hydrothermal alteration systems lasted to ~100 Ma, possibly because of their focus at Xincheng within the young Guojialing granitoid as it cooled more slowly below approximately 300 °C to 220 °C. However, the restricted number of auriferous ore stages, combined with the presence of cross-cutting gold-free quartz-carbonate veins, indicate that gold itself was only deposited over a restricted time interval at ~120 Ma, consistent with studies of orogenic gold deposits elsewhere. This highlights the complex interplay between magmatism, deformation and the longevity of hydrothermal systems that cause genetic controversies. Based on apatite fission-track (AFT) ages, the Xincheng gold deposit was then uplifted and exhumed to near the surface of the crust at 15 Ma, probably due to movement on the crustal-scale Tan-Lu Fault. Recognition of such exhumation histories along gold belts has conceptual exploration significance in terms of the probability of discovery of additional exposed or sub-surface gold ore bodies as discovery is as much a function of preservation as formation of the deposits.  相似文献   

8.
Dave Craw 《Ore Geology Reviews》2010,37(3-4):224-235
The giant gold placer system on the Otago Schist of southern New Zealand was derived from Mesozoic orogenic gold deposits in the underlying schist basement. The core of the schist basement was exhumed in the middle Cretaceous, coeval with the accumulation of the oldest preserved nonmarine sedimentary rocks in the area (ca 112 Ma). Those sedimentary rocks contain quartz clasts, with distinctive ductile deformation textures, that were derived from structural zones in, or adjacent to, major orogenic gold deposits. Quartz textures in these structural zones are readily distinguishable from the rest of the schist belt, and hence provide a fingerprint for erosion of gold. The earliest sedimentary rocks on the margins of the gold-bearing schist belt are immature, and were derived from unoxidised outcrops in areas of high relief. Gold was not liberated from unoxidised basement rocks during erosion, and was removed from the system without placer concentration. Placer concentration did not begin until about 20 million years later, when oxidative alteration of gold deposits had facilitated gold grain size enhancement from micron scale (primary) to millimetre scale (secondary). Subsequent erosion and recycling of gold in the early Cenozoic, and again in the late Cenozoic, caused additional concentration of gold in progressively younger deposits. The Klondike giant placer goldfield of Canada had a similar geological history to the Otago placer field, and Klondike placer accumulation occurred in the late Cenozoic, at least 70 million years after Mesozoic exhumation of orogenic gold. The giant placer deposit on the western slopes of the Sierra Nevada in California occurs in Eocene and younger sedimentary rocks, at least 40 million years younger than the timing of major exhumation of the source rocks. Circum-Pacific giant gold placers formed under entirely different tectonic regimes from the emplacement of their source orogenic deposits, and these giant placer deposits do not form in foreland basins associated with convergent orogens. Formation of giant placers requires less active erosion and more subdued topography than the collisional orogenic activity that accompanied emplacement of source gold deposits in basement rocks, as well as oxidative alteration of the primary deposits to liberate gold from sulfide minerals and enhance secondary gold grain size.  相似文献   

9.
Following surface mining of the Athabasca Oil Sands deposits in northeastern Alberta, Canada, land reclamation entails the reconstruction of soil-like profiles using salvaged soil materials such as peat and mining by-products. The overall objective of this research was to assess soil organic matter (SOM) quality in different reclamation practices as compared to undisturbed soils found in the region. Soil samples (0–10 cm) were taken from 45 plots selected to represent undisturbed reference ecosites and reclamation treatments. Soil OM pools were isolated using a combination of acid hydrolysis and physical separation techniques. Chemical composition of the low density fractions was characterized using ramped cross polarization (RAMP-CP) 13C nuclear magnetic resonance (NMR). Differences between disturbed and undisturbed sites reflected the influence of different botanical inputs (peat vs. forest litter) to SOM composition. Reconstructed soils were characterized by significantly lower alkyl over O-alkyl carbon (ALK/O-ALK) ratios (0.3) than undisturbed sites (0.5). For these reconstructed soils, a significantly higher proportion of soil carbon was present in the sand associated (Heavy sand) pool (49.2 vs. 37.3) and in the acid-unhydrolyzable residue (AUR) fraction (61.3 vs. 54.7). These SOM parameters were significantly related to time since reconstruction, with the AUR (p value = 0.012) and Heavy sand (p value = 0.05) fractions decreasing with time since reconstruction, while the ALK/O-ALK ratio increased (p value = 0.006). These findings suggest that the ALK/O-ALK, AUR, and Heavy sand parameters are suitable indicators for monitoring SOM quality in these reconstructed soils following oil sands mining.  相似文献   

10.
《Applied Geochemistry》2006,21(3):419-436
Geochemical maps expressing areal distributions of chemical elements in the earth’s land surface have been published in several countries in relation to various global environment issues. The authors have applied a radiogenic isotope ratio, 87Sr/86Sr, to geochemical mapping in order to understand the geological origin, transportation and dispersion system of chemical elements in the earth’s land surface. The Sr isotope ratio is a useful tracer for distinguishing the geological origin of surficial deposits, especially in areas where surface exposure of bedrocks is low, because it is not significantly altered by the processes of weathering and transportation. Most bedrocks in the Japanese islands are covered by plants, soils and urban areas. In this study, 142 of 1219 stream sediments (<180 μm) collected from the northeastern part of Aichi Prefecture, in the central part of Japan (75 km × 30 km), were analyzed. Their Sr isotope ratios range from 0.7086 to 0.7315 with an average of 0.7129, except for one sample. This average is higher than the mean of the upper crust of the Japan Arc (the Japanese Island Crustal Composite, JICC), 0.7077. This difference can be attributed to the below-average presence of young volcanic rocks, generally having lower 87Sr/86Sr values, and the above-average presence of granitic rocks, in the study area compared with the surface exposure of the Japan Arc. The first factor controlling the distribution of Sr isotope ratios is the bedrock distributed around the sampling points. Regional variation in the 87Sr/86Sr value shows that it is higher in the western and southeastern parts, where sedimentary rocks and metamorphic rocks are distributed, and that it is lower mainly in the central part, where granitic rocks are distributed. The 87Rb/86Sr–87Sr/86Sr plot for stream sediments more clearly reveals the differences and similarities of bedrocks. In some locations, the distribution of Sr isotope ratios does not correspond to that of bedrocks on the geological map. One reason is the existence of unmapped bedrock, for example, small intrusive masses of granite. The other is fluvial transportation and dispersion. The distribution of the isotope ratios suggests that some stream sediments include surficial deposits from a few km upstream. Application of the Sr isotope ratio to geochemical mapping is useful for revealing both the distribution of unexposed bedrocks and the transportation of surficial deposits. Information on unexposed bedrocks will be expected to contribute to the improvement of geological mapping.  相似文献   

11.
We present a new set of contour maps of the seismic structure of South America and the surrounding ocean basins. These maps include new data, helping to constrain crustal thickness, whole-crustal average P-wave and S-wave velocity, and the seismic velocity of the uppermost mantle (Pn and Sn). We find that: (1) The weighted average thickness of the crust under South America is 38.17 km (standard deviation, s.d. ±8.7 km), which is ∼1 km thinner than the global average of 39.2 km (s.d. ±8.5 km) for continental crust. (2) Histograms of whole-crustal P-wave velocities for the South American crust are bi-modal, with the lower peak occurring for crust that appears to be missing a high-velocity (6.9–7.3 km/s) lower crustal layer. (3) The average P-wave velocity of the crystalline crust (Pcc) is 6.47 km/s (s.d. ±0.25 km/s). This is essentially identical to the global average of 6.45 km/s. (4) The average Pn velocity beneath South America is 8.00 km/s (s.d. ±0.23 km/s), slightly lower than the global average of 8.07 km/s. (5) A region across northern Chile and northeast Argentina has anomalously low P- and S-wave velocities in the crust. Geographically, this corresponds to the shallowly-subducted portion of the Nazca plate (the Pampean flat slab first described by Isacks et al., 1968), which is also a region of crustal extension. (6) The thick crust of the Brazilian craton appears to extend into Venezuela and Colombia. (7) The crust in the Amazon basin and along the western edge of the Brazilian craton may be thinned by extension. (8) The average crustal P-wave velocity under the eastern Pacific seafloor is higher than under the western Atlantic seafloor, most likely due to the thicker sediment layer on the older Atlantic seafloor.  相似文献   

12.
Ambient noise analysis in Northern Taiwan revealed obvious lateral variations related to major geological units. The empirical Green’s functions extracted from interstation ambient noise were regarded as Rayleigh waves, from which we analyzed the group velocities for period from 3 to 6 s. According to geological features, we divided Northern Taiwan into seven subregions, for which regionalized group velocities were derived by using the pure-path method. On average, the group velocities in mountain areas were higher than those in the plain areas. We subsequently inverted the S-wave velocity structure for each subregion down to 6 km in depth. Following the analysis, we proposed the first models of geology-dependent shallow S-wave structures in Northern Taiwan. Overall, the velocity increased substantially from west to east; specifically, the mountain areas, composed of metamorphic rocks, exhibited higher velocities than did the coastal plain and basin, which consist of soft sediment. At a shallow depth, the Western Coastal Plain, Taipei Basin, and Ilan Plain displayed a larger velocity gradient than did other regions. At the top 3 km of the model, the average velocity gradient was 0.39 km/s per km for the Western Coastal Plain and 0.15 km/s per km for the Central Range. These S-wave velocity models with large velocity gradients caused the seismic waves to become trapped easily in strata and, thus, the ground motion was amplified. The regionalized S-wave velocity models derived from ambient noises can provide useful information regarding seismic wave propagation and for assessing seismic hazards in Northern Taiwan.  相似文献   

13.
The Urals can be regarded as a significant Cu-Mo-porphyry province, hosting over 30 porphyry deposits. Although their geological structure and ore-forming processes have been studied in great detail, uncertainty remains about their age and related geotectonic setting. In this contribution we report for the first time the Re-Os dating of molybdenites from three Cu-Mo porphyry deposits, namely Kalinovskoe, Mikheevskoe and Talitsa. Three molybdenite samples from the Kalinovskoe deposit yield Silurian Re-Os ages ranging from 427.1 Ma to 431.7 Ma (mean 429.8 ± 4.8 Ma; 2σ standard deviation), and a Re–Os isochron age of 430.7 ± 1.3 Ma (MSWD = 0.63), which coincides with previous U-Pb zircon dating of ore-hosting diorites from the same ore field (427 ± 6 Ma). The molybdenite from the Mikheevskoe deposit gives Re-Os ages of 357.8 ± 1.8 Ma and 356.1 ± 1.4 Ma (mean 357.0 ± 2.4 Ma; Carboniferous/Tournaisian), which corresponds to previous U-Pb dating of zircons from the diorite hosting porphyry deposit (356 ± 6 Ma). The molybdenite from Talitsa Mo-porphyry deposit yields the youngest Re-Os ages of 298.3 ± 1.3 and 299.9 ± 2.9 Ma (mean 299.1 ± 2.3 Ma) at Carboniferous-Permian boundary. Thus, the studied Cu and Mo porphyry deposits are not synchronous and belong to distinct tectonic events of the Urals.  相似文献   

14.
Chromite deposits associated with layered anorthosite complexes in the Archaean high-grade terranes are rare in the world. The late Archaean Sittampundi Layered Magmatic Complex, Tamil Nadu, India is one of the few such deposits in the world where layers of Fe-Al rich chromites are associated with extremely calcic (An>95) anorthosite. ‘Frozen in’ magmatic mineralogy of the chromitite and the enclosing anorthosite suggest successive crystallization of chromite + clinopyroxene and chromite + clinopyroxene + anorthite from a hydrous Al-rich basaltic melt that was emplaced in a suprasubduction zone setting. Intense deformation and upper amphibolite facies metamorphism at ∼2.45 Ga converted the magmatic assemblages to hitherto unreported hornblende + gedrite + Mg-Al rich spinel ± chlorite bearing assemblages. During metamorphic reconstitution, chromite was pseudomorphically replaced by green spinel in the domains rich in secondary amphiboles. Mass-balance calculation and algebraic analyses of the observed mineralogy suggest that a number of chemical species including chromium became mobile during the formation of spinel pseudomorph in response to infiltration driven metamorphism. Aluminium became mobile in the length scale of chromite grain but remained immobile in the length scale of a thin section.  相似文献   

15.
Previous studies of the availability of lithium for use in batteries to power electric vehicles (EVs) have reached the generally encouraging conclusion that resources are sufficient to meet growing demand for the remainder of the 21st century. However, these surveys have not looked past estimates of lithium resource to the geological constraints on deposit size and composition that will allow the resources to be converted to reserves from which lithium can be produced economically. In this survey, we review the relevant geological features of the best characterized pegmatite, brine and other types of lithium deposits and compare their potential for large-scale, long-term production.The comparison shows that the average brine deposit (1.45 Mt Li) is more than an order of magnitude larger than the average pegmatite deposit (0.11 Mt Li) and that brine deposits, especially the large Atacama (Chile) and Uyuni (Bolivia) deposits, have a much larger total lithium resource (21.6 Mt Li). Brine deposits clearly have a much greater capacity for large-scale, long-term production than do pegmatite deposits. However, individual brine deposits differ considerably and successful production from one deposit does not necessarily assure success at others. Conversion of brine resources to reserves will depend on the degree of compartmentalization of brine reservoirs, the extent to which brine can be recovered without dilution from recharge waters and degradation of salt-bearing reservoir rock, and whether other constituents of the brines, including potassium, magnesium, bromine and boron, restrict processing or the capacity of production to respond to changes in demand for lithium.Despite their smaller size and total estimated resource (3.9 Mt), pegmatites will remain of interest because of their wider geographic distribution and consequently lesser susceptibility to supply disruptions and their more lithium-dominant compositions, which might allow more flexible response to market changes. Some deposits will be amenable to large-scale mining, but significant production might also come from selective, underground mining of small deposits in areas with low labor costs. Even the largest pegmatite deposits, such as those at Greenbushes (Australia) and Manono–Kitolo (Democratic Republic of Congo) have estimated resources that are similar to only an average brine deposit. For this reason, continuous, long-term production from pegmatites will require extensive exploration and discovery of new pegmatite deposits and districts.Two other types of lithium deposits, unusual rocks and unusual fluids, have also received attention. Deposits consisting of rocks and minerals that are enriched in lithium by interaction with brines and hydrothermal solutions, including the large Jadar (Serbia) and King Valley (USA) deposits, have estimated resources of about 3.4 Mt Li. Unusual brines in oilfields and the Salton Sea geothermal field (USA) contain an estimated 2 Mt Li. Both of these deposit types will require new processing methods but are likely to become important because of their lithium-dominant compositions and relatively large size.The total lithium resource in these deposits (31.1 Mt Li) far exceeds estimated lithium demand of up to 20 Mt Li (including consideration for recycling) in all markets through 2100. The difference between these two estimates should be vied largely as a challenge rather than a comfort. Evaluation of the economic extractability of these resources will require large investments and result in only partial success. If prices provide sufficient encouragement and exploration is sustained, however, lithium resources should be available for the next century.  相似文献   

16.
The origin of bedded iron-ore deposits developed in greenstone belt-hosted (Algoma-type) banded iron formations of the Archean Pilbara Craton has largely been overlooked during the last three decades. Two of the key problems in studying these deposits are a lack of information about the structural and stratigraphic setting of the ore bodies and an absence of geochronological data from the ores. In this paper, we present geological maps for nearly a dozen former mines in the Shay Gap and Goldsworthy belts on the northeastern margin of the craton, and the first U-Pb geochronology for xenotime intergrown with hematite ore. Iron-ore mineralisation in the studied deposits is controlled by a combination of steeply dipping NE- and SE-trending faults and associated dolerite dykes. Simultaneous dextral oblique-slip movement on SE-trending faults and sinistral normal oblique-slip movement on NE-trending faults during initial ore formation are probably related to E–W extension. Uranium–lead dating of xenotime from the ores using the sensitive high-resolution ion microprobe (SHRIMP) suggests that iron mineralisation was the cumulative result of several Proterozoic hydrothermal events: the first at c. 2250 Ma, followed by others at c. 2180 Ma, c. 1670 Ma and c. 1000 Ma. The cause of the first growth event is not clear but the other age peaks coincide with well-documented episodes of orogenic activity at 2210–2145 Ma, 1680–1620 Ma and 1030–950 Ma along the southern margin of the Pilbara Craton and the Capricorn Orogen farther south. These results suggest that high-grade hematite deposits are a product of protracted episodic reactivation of a structural architecture that developed during the Mesoarchean. The development of hematite mineralisation along major structures in Mesoarchean BIFs after 2250 Ma implies that fluid infiltration and oxidative alteration commenced within 100 myr of the start of the Great Oxidation Event at c. 2350 Ma.  相似文献   

17.
The Yunnan–Guizhou–Guangxi “golden triangle” is considered to be one of the regions hosting Carlin-like gold deposits in China. Gold deposits in this region can be grouped into lode type that are controlled by faults and layer-like type controlled by stratigraphy. Arsenopyrite is one of the major gold-bearing minerals in these deposits. Rhenium–Os isotopic dating of arsenopyrite from the lode type Lannigou and Jinya and the layer-like type Shuiyindong gold deposits yields isochron ages of 204 ± 19 Ma, 206 ± 22 Ma, and 235 ± 33 Ma, respectively. The data suggest that the Carlin-like gold deposits formed in Late Triassic to Early Jurassic, which is clearly earlier than the ca. 100–80 Ma acid to ultra-basic magmatism in this part of southwestern China. The ages are consistent with ore formation during a period of post-collisional lateral transpression, which is similar to that of the Carlin-like gold deposits in western Qinling of China, but quite different from Carlin-type gold deposits in Nevada, U.S.A.  相似文献   

18.
The mantle structure in Central Asia was investigated by surface-wave tomography from dispersion of the fundamental mode of the Rayleigh wave group velocities along more than 3200 earthquake-station paths within 40° N to 60° N and 80° E to 132° E. The velocities were processed by the frequency-time analysis at periods from 10 to 250 s to obtain their dispersion curves. Then group velocity maps were computed separately for each period, at different sampling intervals: at every 5 s for the short periods from 10 to 30 s, at 10 s for periods between 30 and 100 s, and at 25 s for the longest periods of 100 to 250 s. Resolution was estimated according to the effective averaging radius (R) and presented likewise in the form of maps. To estimate the depths of the revealed inhomogeneties, locally averaged dispersion curves were calculated using the group velocity maps, with reference to the radius R, and were then inverted to S-wave velocity-depth profiles. The resulting three-dimensional S-wave velocity structure to depths of about 700 km revealed large lateral inhomogeneties through the entire depth range. This pattern may be due to the history of the major tectonic structures, as well as to ongoing processes in the mantle.  相似文献   

19.
The Hetai goldfield, located in the southern segment of the Qinzhou Bay-Hangzhou Bay Juncture Orogenic Belt (QHJB), is the largest concentration of gold deposits in Guangdong Province, South China. The gold mineralization is hosted within the late Neoproterozoic to early Paleozoic Yunkai Group and strictly confined to mylonite (ductile shear) zones. The nature of the structural control of mineralization, in particular the role of ductile versus brittle deformation and their ages, which remain unclear despite numerous previous studies, are examined in this paper through an integrated study of geochronology and mineralogy.Lamellar and filament structures shown by pyrite and pyrrhotite in the ores suggest that sulfidation took place during ductile deformation and syntectonic metamorphism, but the majority of the ores are associated with brittle deformation features. In combination with macroscopic and microscopy observations on shear fabrics, LA-ICP-MS U-Pb dating on zircons of hydrothermal origin from mylonites suggests that the Hetai goldfield was subjected to two shearing events: an early sinistral ductile shearing at ca. 240 Ma, and a late dextral ductile-brittle shearing at ca. 204 Ma (Indosinian). These ages are ca. 90–30 Ma older than the previously published gold mineralizing ages of ca. 175–152 Ma (Yanshanian), suggesting that the main gold mineralization and related brittle deformation significantly postdate the ductile deformation. This inference is supported by the mineralization temperatures estimated from geothermometers of arsenopyrite (ca. 350–290 °C), chlorite (ca. 260–230 °C), and sphalerite (ca. 230–170 °C) intergrown with native gold, which are considerably lower than that for the ductile deformation (500–300 °C or higher). Based on these data, we propose that the gold mineralization in the Hetai goldfield predominantly occurred during the Yanshanian event, and only minor gold mineralization and associated sulfidation took place during the earlier Indosinian ductile deformation.  相似文献   

20.
In the Ayacucho basin of central Perú the regional Quechua II contractional deformation is bracketed by 40Ar/39Ar isotopic age determinations to a maximum duration of about 300,000 years, and probably less than 150,000 years, centered on 8.7 Ma. The strongly deformed Huanta Formation beneath the Quechua II angular unconformity was deposited during a period of extension that began before 9.05 ± 0.05 Ma. Deposition of a thick succession of alluvial fan deposits interbedded with flows of basaltic andesite in the Tingrayoc Member continued up to about 8.76 ± 0.05 Ma with the later part of the sedimentary record reflected by lacustrine deposits of the Mayocc Member. The upper limit on contractional deformation is constrained by an age of 8.64 ± 0.05 Ma on a unit of tuff near the base of the Puchcas volcanics, which in places was deposited upon near-vertical beds of the Huanta Formation. The Ayacucho Formation was deposited, locally unconformably, upon the Puchcas volcanics beginning slightly before 7.65 ± 0.10 Ma.Extended periods of neutral to tensional stress interrupted by rapid well-developed pulses of contractional deformation demonstrate the episodic behavior of Andean orogeny in Perú. The very short duration for the Quechua II event implies that driving forces for episodic deformation may be related to coupling along the orogen boundaries and strain accumulation and release mechanisms in the continental crust instead of much longer-term variations in the configuration of converging plates.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号