共查询到20条相似文献，搜索用时 46 毫秒
1.
Debris slope stability analysis using three-dimensional finite element method based on maximum shear stress theory 总被引：2，自引：0，他引：2
Jiancong Xu 《Environmental Earth Sciences》2011,64(8):2215-2222
How to evaluate debris slope stability reasonably is yet an urgent problem. The paper presents an applied method evaluating
debris slope stability, using three-dimensional (3D) finite element contact algorithm based on the maximum shear stress theory.
The Guanjia debris slope is located between K9 + 940 and K10 + 200 of Longli First-class Highway in Zhejiang, China. On its
left slope, some cracks appeared at the end of 2002 and these were immediately backfilled, overlying a plastic membrane. However,
many new cracks appeared on the slope during the rainfall in April 2003. Meanwhile, some small collapses and springs occurred
in the front of the slope, and many cracks appeared on the middle part. The stability of the Guanjia debris slope was analyzed
using the method proposed in the paper, the strength reduction finite element method, the imbalance thrust force method, Fellenius
method, Janbu simplified method, Spencer’s method, Morgenstern–Price method and generalized limit equilibrium (GLE) method.
The results show that: (1) the safety factors of the debris slope obtained using the imbalance thrust force method is the
minimum in all limit equilibrium methods; (2) 1.07 and 1.06 are the safety factors of Section CC′ and DD′ (the middle part
of this slope) of the Guanjia debris slope obtained using the method proposed (FEM with shear strength reduction technique
based on the maximum shear stress theory) in this study, respectively, which reflect the slope actual condition in critical
failure status; (3) the method proposed in this study may take into account the spatial effect of the debris slope, which
makes the results of slope stability analysis more reasonable and reliable than other methods that can be used as a reference
for the evaluation of stability of the same type of debris slope; and (3) further study should be done to confirm whether
the proposed method in this study is suitable for other types of slopes. 相似文献
2.
对于超固结黏土和密实砂土等软化材料或非关联塑性材料组成的地基、边坡及挡土墙墙后土体,在其破坏过程中,会产生应变局部化现象,使得控制方程的类型发生改变,从而导致出现数值解不惟一和解的网格相关性等现象。为了克服这些数值困难,基于强间断分析方法,及单元内嵌不连续面的有限元模型,对地基、土坡、墙后土体的渐进破坏过程进行了数值模拟。计算结果表明,单元内嵌不连续面模型可以有效地模拟土工结构失稳破坏过程,并且能够明显地改善采用常规有限元方法所产生的网格尺寸相关性问题。这一方法可作为传统极限平衡法进行稳定分析、承载力分析的有益补充。 相似文献
3.
结合厦门某岩质高边坡治理工程实例,通过极限平衡法和有限元法对边坡稳定性进行分析,初步探讨节理裂隙的发育程度对岩质边坡稳定性的影响以及锚固件和边坡岩体之间的相互作用机理,在此基础上进行边坡工程支护方案的设计,得出的结论对类似工程有参考价值。 相似文献
4.
通过系统分析边坡工程地质条件及岩体结构,采用定性分析结合有限元模拟研究了边坡变形破坏模式,并采用块体理论及极限平衡法系统分析边坡局部及整体稳定性。结果表明,切向边坡的变形破坏模式可以分为两类:深层变形破坏为受层间软弱夹层空间展布特征控制的块体失稳,浅表层破坏为局部块体失稳及强风化强卸荷带岩体沿最大剪应力带的滑移-拉裂变形。稳定性分析结果认为边坡浅表层岩体稳定性差,但发生深层破坏的可能性较小。 相似文献
5.
Back analysis of an excavated slope failure in highly fractured rock mass: the case study of Kargar slope failure (Iran) 总被引：2，自引：1，他引：1
Mostafa Sharifzadeh Mohsen Sharifi S. Mohammad Delbari 《Environmental Earth Sciences》2010,60(1):183-192
This paper examines the failure of Kargar cut slope located at the south part of Esfahan subway using analytical and numerical
back analysis methods. The excavated trench has 27 m depth with near vertical walls due to the space limitation around it.
The geology of the area comprises weathered and heavily jointed shale and sandstone overlaid by alluvium deposits. Despite
the slope being supported by shotcrete and fully grouted rock bolts, a catastrophic failure occurred at the east wall. Due
to the uncertainty about the causes of failure initiation, back analyses have been performed via both the limit equilibrium
and numerical method for considering various probable mechanisms. In the back analysis with limit equilibrium method, the
rock mass is assumed as an equivalent continuum and Hoek–Brown failure criterion and geological strength index (GSI) are applied
to calculate the shear strength parameters. The results show that GSI value was 33 in the failed mass. In the numerical back
analysis, the distinct element method is applied to study the contribution of rock joints to the failure and progressive rock
mass strength degradation until failure. The results show that threshold values of joint cohesion and friction were 0.2 MPa
and 30°, respectively. Also the modeled slip surface being step-shaped agrees with the observed one. 相似文献
6.
论文基于对陕西省宝鸡市黄土工程边坡防护工程的系统调查测绘,针对普遍存在的抗滑挡墙防治失效问题进行了研究,提出了抗滑挡墙3种失效模式:黄土泥流越顶、墙体剪切破坏和挡墙“坐船随行”。以岭南滑坡抗滑挡墙防治失效为例,开展了黄土土力学测试,运用极限平衡法对滑坡推力进行了复核,分析了不同失效模式对应的成因机制。研究表明:（1）黄土工程边坡失稳多受工程切坡和降雨的双重影响。（2）坡面排水系统不完善、表层土体松散、降雨及坡体局部存在积水洼地是导致黄土泥流发生的主要影响因素;挡墙有效埋深不足是发生“坐船随行”的主因。（3）最后对解决黄土工程边坡抗滑挡墙失效问题进行了对策探讨。 相似文献
7.
Asadollah Ranjbar Karkanaki Navid Ganjian Faradjollah Askari 《Geotechnical and Geological Engineering》2017,35(3):1079-1092
This study presents a new algorithm for design of cantilever retaining walls based on the proposed failure mechanisms and considers the effects of wall geometric parameters using an upper-bound limit analysis approach. All previous work on this subject has only focused on the optimum design of the retaining walls assuming constant forces, irrespective of the total stability and critical conditions of failure mechanisms. In the present study, the upper-bound limit analysis method was used to determine the shape of the critical failure mechanisms for a retaining wall simultaneously with its optimal dimensions. The safety factors against overturning, sliding, and bearing capacity failure were assessed by the limit analysis approach. The current results show good agreement with the results obtained using the limit equilibrium methods and finite element analyses. The results obtained based on the proposed failure mechanism show that the geometry and dimensions of the wall affect its stability safety factors, the shape of the critical failure mechanisms and the active pressure on the wall; therefore, the process of determining the shape of the critical failure mechanisms, checking the stability of the wall and the procedure of finding its optimal dimensions should be performed simultaneously. 相似文献
8.
基于FELA的随机场方法在考虑降雨入渗的边坡开挖稳定性分析中的应用 总被引：2，自引：2，他引：0
黑山共和国南北高速公路项目部分路段处于复理石地区,降雨集中、空间变异性显著且分层分布的岩土体给道路边坡施工带来了挑战。条分法、常规有限元法等确定性分析方法不能考虑岩土材料的不确定性,给出的具有唯一性、确定性的结果不能反映边坡稳定的不确定性。以该工程某边坡为例,采用有限元极限分析方法（FELA）,考虑岩土材料强度的空间变异性,利用上下限解法得出安全系数的分布区间。由勘察资料得到材料均值、标准差和空间相关长度并重建描述抗剪强度指标的二维随机场,同时考虑开挖岩层的节理分布,分析边坡在分级开挖过程中,各施工步骤的稳定性和破坏模式。与有限元分析结果相比,随机场条件下,部分情况开挖阶段安全系数低于限值,并出现局部破坏和整体破坏两种形式。结合不饱和土理论,模拟暴雨情况下雨水的入渗深度并在饱和区采用降低后的强度参数重新计算。通过蒙特卡洛模拟,得到各工况下安全系数、滑动体体积、挡墙弯矩和锚杆内力的概率密度分布函数。挡墙结构约束土体的变形,使得破坏模式趋向于整体破坏,安全系数分布区间变小。锚杆能带动更多土体进入工作状态,同样约束安全系数分布区间。旱季施工与雨季施工边坡破坏区域不同,同等支护条件下,雨季边坡安全系数分布区间更大,且均值明显降低。 相似文献
9.
在反倾层状边坡的破坏机制和稳定性分析方面,由于其稳定性一般较好,系统深入地研究其破坏机制和稳定性的反而不多。以火山岩地层多次火山喷发旋回形成的缓倾角反倾似层状岩质边坡为研究对象,利用有限元分析其位移矢量图,揭示边坡的变形破坏机制和稳定性控制要素,利用极限平衡法、矢量和法,评价其稳定性,利用强度折减法分析塑性区的扩展规律,揭示滑动面发展的时间空间规律,结果表明,（1）类似层状反倾岩质边坡的潜在破坏模式为剪切–张拉破坏,滑面形态表现为近似折线状：顺坡向穿过凝灰岩夹层和强风化岩体,后缘通过陡倾结构面;（2）极限平衡法、矢量和法的边坡稳定性综合评价表明边坡浅层稳定性不满足工程稳定性要求,深层稳定性满足工程稳定性要求,且三维矢量和安全系数大于二维结果,是三维效应造成;（3）塑性区扩展揭示滑面的空间发展序列为滑面4、5、3。文中的技术路线和分析方案可用于缓倾角反倾层状岩质边坡稳定性评价。 相似文献
10.
降雨入渗下强风化软岩高填方路堤边坡稳定性研究 总被引：12，自引：1，他引：11
降雨入渗是影响边坡稳定性、导致边坡失稳的最主要和最普遍的环境因素。强风化软岩用于高填方路堤填土边坡时,填土的压实度直接影响路堤土的渗透性和强度。利用饱和与非饱和渗流有限元模拟降雨入渗时高填方路堤的暂态渗流场,将计算得到的暂态孔隙水压力分布用于边坡的极限平衡分析,并考虑基质吸力对非饱和土抗剪强度的影响。探讨降雨强度、持时和压实度对边坡稳定性的影响。研究表明,强风化软岩用于高填方路堤压实度不能低于90 %;当暴雨强度为200 mm/d时,边坡就会失稳。其成果将为高填方路堤边坡防护设计提供科学依据。 相似文献
11.
12.
Stability analysis of the 2007 Chehalis lake landslide based on long-range terrestrial photogrammetry and airborne LiDAR data 总被引：1，自引：1，他引：0
Marc-André Brideau Matthieu Sturzenegger Doug Stead Michel Jaboyedoff Martin Lawrence Nicholas J. Roberts Brent C. Ward Thomas H. Millard John J. Clague 《Landslides》2012,9(1):75-91
On December 4th 2007, a 3-Mm3 landslide occurred along the northwestern shore of Chehalis Lake. The initiation zone is located at the intersection of the
main valley slope and the northern sidewall of a prominent gully. The slope failure caused a displacement wave that ran up
to 38 m on the opposite shore of the lake. The landslide is temporally associated with a rain-on-snow meteorological event
which is thought to have triggered it. This paper describes the Chehalis Lake landslide and presents a comparison of discontinuity
orientation datasets obtained using three techniques: field measurements, terrestrial photogrammetric 3D models and an airborne
LiDAR digital elevation model to describe the orientation and characteristics of the five discontinuity sets present. The
discontinuity orientation data are used to perform kinematic, surface wedge limit equilibrium and three-dimensional distinct
element analyses. The kinematic and surface wedge analyses suggest that the location of the slope failure (intersection of
the valley slope and a gully wall) has facilitated the development of the unstable rock mass which initiated as a planar sliding
failure. Results from the three-dimensional distinct element analyses suggest that the presence, orientation and high persistence
of a discontinuity set dipping obliquely to the slope were critical to the development of the landslide and led to a failure
mechanism dominated by planar sliding. The three-dimensional distinct element modelling also suggests that the presence of
a steeply dipping discontinuity set striking perpendicular to the slope and associated with a fault exerted a significant
control on the volume and extent of the failed rock mass but not on the overall stability of the slope. 相似文献
13.
根据影响浆砌块石挡土墙边坡稳定性的主要控制变量：挡土墙的垂直度i、挡土墙高度h、填料的内摩擦角 、墙后边坡土的重度 、土对挡土墙基底的摩擦系数 、土对挡土墙墙背的摩擦角 等6个因素变量,利用正交设计原理优化试验设计方案,结合库仑理论与力的多边形法,分析计算浆砌块石挡土墙边坡的安全系数,最后用尖点突变理论的突变级数法进一步判断边坡的稳定性。研究结果表明：影响挡土墙边坡稳定性的6个主要控制变量因素的主次关系为 ;在分析挡土墙边坡稳定性时,采用突变级数法进行计算判断,可以直观地判断边坡的稳定情况,从而弥补工程中运用传统的最小安全系数法进行判断出现的模糊不确定的情况。 相似文献
14.
在对南海某挡土墙失事现场调查基础上，通过挡土墙稳定性计算，查明了造成挡土墙失事的原因，即挡土墙砌筑在松动土体上，砌筑质量差、墙后回填土未经夯实和挡土墙滤水排水设置不当造成的查明了事故原因。 相似文献
15.
Earthquake effects are commonly considered in the stability analysis of rock slopes and other earth structures. The standard approach is often based on the conventional limit equilibrium method using equivalent Mohr–Coulomb strength parameters (c and ?) in a slip circle slope stability analysis. The purpose of this paper is to apply the finite element upper and lower bound techniques to this problem with the aim of providing seismic stability charts for rock slopes. Within the limit analysis framework, the pseudo-static method is employed by assuming a range of the seismic coefficients. Based on the latest version of Hoek–Brown failure criterion, seismic rock slope stability charts have been produced. These chart solutions bound the true stability numbers within ±9% or better and are suited to isotropic and homogeneous intact rock or heavily jointed rock masses. A comparison of the stability numbers obtained by bounding methods and the limit equilibrium method has been performed where the later was found to predict unconservative factors of safety for steeper slopes. It was also observed that the stability numbers may increase depending on the material parameters in the Hoek–Brown model. This phenomenon has been further investigated in the paper. 相似文献
16.
为了研究弃土场边坡挡墙加固中,挡墙基底在不同换填宽度条件下以及在同一宽度条件下不同换填深度对弃土场边坡稳定性的影响。基于有限元强度折减法理论,利用midas GTS有限元软件,依托工程实例建立二维有限元模型。分析了不同换填宽度及换填深度情况下弃土场边坡在暴雨工况下的稳定性系数。研究发现在同一换填宽度条件下,换填深度对边坡稳定性起决定性作用;只有在换填深度达到一定值时,增加换填宽度才对边坡稳定性有提升作用。 相似文献
17.
基于国内外研究现状和岩质滑坡案例,总结出岩质滑坡的水力致灾机制,归纳考虑水力作用下的岩质斜坡主要失稳破坏模式,评述了岩质斜坡稳定性分析方法。岩质滑坡的水力致灾机制主要由于水对滑体产生的静水压力（岩体侧面的推力、滑面的扬压力和岩体的浮力）和动水压力（向坡外的渗透力）作用。从渗流—应力耦合的角度可较全面评价水渗流对坡体稳定性的影响。斜坡的岩体结构决定了水力作用方式和坡体的失稳破坏形式,考虑水力作用下的岩质斜坡失稳破坏形式主要有:顺层滑动、平推式滑动、楔形体滑移和危岩的崩塌。对于水力作用下岩质斜坡的稳定性分析方法主要有极限平衡法、有限元强度折减法、基于断裂力学的危岩稳定性分析法和渗流—应力耦合模型分析法,其中前两种方法应用较为广泛。 相似文献
18.
19.
Numerical Analysis of Block Caving-Induced Instability in Large Open Pit Slopes: A Finite Element/Discrete Element Approach 总被引：3，自引：2，他引：1
This paper addresses one of the most challenging problems in mining rock engineering—the interaction between block cave mining
and a large overlying open pit. The finite element modeling/discrete element modeling (FEM/DEM) approach was utilized in the
analysis of block caving-induced step-path failure development in a large open pit slope. The analysis indicated that there
is a threshold percentage of critical intact rock bridges along a step-path failure plane that may ensure the stability of
an open pit throughout caving operations. Transition from open pit to underground mining at Palabora mine presents an important
example of a pit wall instability triggered by caving. Using combined FEM/DEM-DFN (discrete fracture network) modeling, it
was possible to investigate the formation of a basal failure surface within an open pit slope as a direct result of cave mining.
The modeling of Palabora highlighted the importance of rock mass tensile strength and its influence on caving-induced slope
response. 相似文献
20.
考虑非饱和黏土边坡的基质吸力和渗流力,根据水位线位于滑面上、下的临界平衡状态,分别建立了滑体条块极限平衡状态下力和力矩平衡式,获得了降雨条件下非饱和黏土边坡稳定性的极限平衡条分法计算式。通过试验、参量变换以及作用力的位置关系可以确定相关参量,并采用数值计算求解临界平衡状态下滑体条块的相互作用力系数和非饱和边坡安全系数。案例结果表明：考虑渗流力时的非饱和黏土边坡安全系数比不考虑渗流力的安全系数降低约13.8%,且考虑渗流力作用的条间力作用系数变化率明显大于不考虑渗流力的结果;当降雨强度超过一定值时,坡面径流很快形成,边坡出现不稳定的时间基本相同。 相似文献