共查询到20条相似文献,搜索用时 890 毫秒
1.
2.
变形控制设计一直是复合地基设计中的难点,现今提出了“变参数、变刚度、整体调平”的设计思想,同时指出了实现此设计思想的复合地基变形控制设计(系统(DCDS)的开发流程。鉴于复合地基实践超前于理论的现实,为了完善“变参数、变刚度、整体调平”复合地基变形控制设计,最后指出了围绕这一设计思想需要进一步研究的重要问题。 相似文献
3.
4.
内部控制制度主要由环境控制、会计系统、控制程度三个方面组成。实现方式有组织规划控制、授权批准控制,预算控制和实物控制四种形式;主要内容有岗位责任制度、业务程序自理制度、会计制度等。建立适合我国国情的内部控制体系,是挖掘企业内部潜力,提高企业经营效率的关键。 相似文献
5.
6.
在航测数字化生产领域,需要与生产相适应的质量检查系统,文章分析了航测数据质量控制的内容,提出了一种适用于航测数字化生产的质量控制方法,研究了航测数字成果质量检查系统应具有的主要功能。 相似文献
7.
8.
“Source du (?)ez”岩溶含水层系统(北蒙皮立(North Montpellieran)岩溶区-Franle S.E.)是内陆类型的岩溶含水层系统演化的地质控制的例子。岩溶含水层系统的演化主要受气候(和古气候)、地质和生物的控制。气候控制水进入岩溶含水层系统后,地质就成了主要的控制因索。地质控制包括: 1.岩性(和古沉积岩相)控制; 2.构造控制; 3.地形雕塑作用和其平面控制; 4.其它地质控制(电磁的,变质的,火山的) 相似文献
9.
二道甸子金矿具有独特的成因机制及成矿控制条件,通过对该矿主矿带金矿化作用与古生代邻碳变岩系,弧形构造带以及与海西期黑云母花岗岩侵入作用之间的关系分析,指出后者是金矿成矿的主要控制条件;并据此总结出金矿富集规律和矿体预测准则,指出在矿区外围及深部存在进一步工作的找矿靶区。 相似文献
10.
混沌控制反演系统构造及算法逻辑设计 总被引:1,自引:0,他引:1
给出了适用于非线性反演的混沌控制反演系统构造方法及求解控制矩阵的算法逻辑设计。该方法在迭代反演控制参数和迭代反演输出结果之间建立耦合关系,通过时时修改控制参数保证迭代稳定收敛到预期的解空间。在求解过程中,应用数据结构方法分析了混沌控制理论中计算控制矩阵的数据结构,采用树形结构表述出控制矩阵计算过程中下标的取值逻辑,利用可以复读栈中元素的中序遍历来遍历每一棵树,寻找各元素的组合序列,给出的数值算例说明了混沌控制反演方法及其算法的有效性。 相似文献
11.
针对间歇式热处理炉温度控制对象的特性要求,提出了参数在线自调整模糊控制与智能积分相结合的一种新型模糊控制方法。该方法的基本思想是在系统误差较大时,用参数在线自调整模糊控制算法以提高系统的响应;在系统误差较小时,加入智能积分作用以消除静态误差,智能积分作用是有选择的施加积分作用,克服了一般连续积分控制的缺点。论述了带智能积分参数在线自调整模糊控制器的设计及软件实现。并且通过在MATLAB软件上的仿真分析表明该方法的合理性及可行性。 相似文献
12.
介绍了地质灾害防治工程的特点,并根据这些特点论述了如何在前期确定地质灾害防治工程的合理造价,工程施工过程中发生的设计变更或其他与合同和工程量清单不一致的地方进行记录并签证,为以后的索赔作准备。在结算阶段要做好索赔工作。 相似文献
13.
14.
根据长江防御洪水方案对雅砻江梯级水库的防洪库容预留要求,分析了预留防洪库容对梯级电站蓄水发电的影响。结合雅砻江水电开发的特点,提出了梯级水库防洪库容总量控制的解决思路,建立了基于防洪库容总量控制的蓄水期发电量最大模型,计算分析了9种不同来水情景的梯级水库优化蓄水方案,并给出了梯级水库总体优化蓄水策略。对该类问题研究具有一定借鉴意义。 相似文献
15.
16.
GPS控制站控制半径的探讨 总被引:1,自引:1,他引:0
笔者通过对200个以上测点用不同GPS控制站的控制参数,用随机软件分别计算单个测点的三维坐标(即x、y、h),并计算测点与控制站之间的距离以及坐标、高程的差值,采用线性回归和正态直方图两种分析方法展示距离与差值之间的关系,得出距离与差值之间不存在线性关系。因此,在本项目的后续工作过程中将GPS控制站的控制半径适当延长至80km(试验的距离范围0~88.621km)。由此建议在以后不同比例尺的GPS定位测量中应增加对GPS控制站控制半径的试验对比工作,不同区域可能有所差异,则工作方法也有所不同。在满足《规范》和《任务书》的条件下,灵活部署具体工作的实施方法。 相似文献
17.
变径凹凸形钻孔灌注桩的成孔工艺及其承载力估算 总被引:1,自引:1,他引:0
本文着重介绍,为提高软土地基钻孔灌注桩的单桩承载力,采用变径方法施工的新型钻孔桩的成孔工艺,使得钻孔桩桩身形态、规格从无控制变为有控制;从无规则变为有规则,进而为承载力的估算,提供了可靠的依据。 相似文献
18.
我国煤炭资源勘探监理已有10年历史,但至今没有建立煤炭资源勘探监理质量控制量化指标。根据各单项工程质鼍控制特点,经过几年的煤炭资源勘探监理探索,提出了煤炭资源勘探各单项工程质量控制量化指标,以期对今后煤炭资源勘探监理质量控制有一定的参考作用。 相似文献
19.
The advection-diffusion equation is used for describing the dispersion of pollutants in a limited area. Methods for preventing dangerous levels of pollutants in ecologically important zones are suggested. The methods are based on the control of emission rates of sources and use the direct and adjoint estimates of the average pollution concentration in the zones. While the direct estimates use solutions of the pollution transport problem and permit to study the ecological situation in the whole domain, the adjoint estimates allow getting information only in the selected zones of the domain. The adjoint estimates are obtained with solutions to the adjoint problem and depend explicitly on the positions of the sources and their emission rates, and on the initial distribution of pollutants in the region. In each such estimate, the adjoint problem solution serves as the influence function that shows the quantitative contribution of every source into the pollution of the corresponding zone. This makes the adjoint estimates very efficient tools in the study of the model response to changes in emission rates and initial conditions, as well as in the development of control strategies. Both non-optimal (sufficient) and optimal control strategies are suggested. Each strategy consists in reducing the emission rates of sources, and defines maximum allowable intensity (in case of optimal control), or sufficient intensity (in case of sufficient control) of each source to avoid violations of hygiene standards. Such criteria are designed taking into account dynamic conditions in the atmosphere or ocean (sea), that is, the processes of propagation, dispersion and transformation of pollutants, as well as the number of sources to control, their locations and the sanitary norms. The control methods developed are illustrated with simple examples using two-dimensional dispersion models. However, these methods can also be applied to three-dimensional models. As an example, in the last part of the article, a three-dimensional model of dispersion is considered. In addition, to expand the scope of application of the methods of control of the intensity of sources, the optimal control strategies are applied to a source that emits a chemical substance to clean aquatic systems contaminated with biofilms (remediation) or oil (bioremediation). 相似文献