首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Free conductive flows in the asthenosphere, layer C, and subduction zone are considered on the basis of experimental and theoretical simulation. The main forces acting on the oceanic lithospheric plate in the subduction zone are described. The horizontally directed forces arising due to free convection in the asthenosphere and transferring the oceanic lithospheric plate toward subduction zone have been estimated. These are friction force Fa and force of gravitational sliding F rd. Thermogravitational force F tg, which is created because the subducting lithospheric plate has a lower average temperature than the ambient mantle, is estimated. The force created owing to phase transitions in the subducted plate has been estimated as well. The tangential stress at the contact of the subducting plate with the continental lithosphere and underlying upper mantle has been determined. The horizontal force arising due to different lateral temperature gradients in the upper mantle on the left and on the right of the subducting plate has been estimated. The results of experimental modeling of the effect exerted upon subduction by counter free convective flows developing in the asthenosphere are considered. The experiments show that the position of the descending free convective flow and thus of the subduction zone depends on the ratio of the thermal power of astehnospheric countercurrents. The pressure arising near the 670 km boundary gives rise to spreading of the subducting plate over this boundary.  相似文献   

2.
It is proposed that major continental collision normally causes two orogenies. The first is characterized by ophiolite obduction, and the second by widespread deformation, often accompanied by metamorphism and granite intrusion. The two orogenies are separated by a relatively quiescent orogenic pause of 40–60 Ma. The two stages of continental collision are illustrated by examples from the Paleozoic Newfoundland Appalachians, and the Mesozoic-Cenozoic Tethyan collision belts of the Zagros and Himalayas.

The stages of continental collision are explained in terms of the forces driving plate motions, which are dominated by the downward pull of subducting oceanic lithosphere and, to a lesser extent, by the outward push of spreading oceanic ridges.

The Taconic stage marks attempted subduction of continental crust. The buoyancy of continental crust offsets the negative buoyancy of subducting oceanic lithosphere and other driving forces so that plate motion is halted. Orogeny involves vertical buoyancy forces and is concentrated along the narrow belt of plate overlap at the subduction zone.

In a major collision the Taconic stage destroys a substantial proportion of the earth's subducting capacity. It is an event of such magnitude that it has global consequences, reducing sea-floor spreading and the rate of convection. This results in retention of heat within the earth and a consequent increase in the forces driving the plates. The orogenic pause represents the time taken for these forces to become strong enough to overcome the obstruction of buoyant continental crust and renew subduction at the collision zone.

The Acadian stage of collision occurs when renewed subduction is achieved by detachment of continental crust from its underlying lithosphere. As the subcrustal lithosphere is subducted, the crust moves horizontally. The result is crustal shortening with widespread deformation and generation of anatectic granitic magma, as well as subduction related volcanism.

The effects of continental collision on the rate of sea-floor spreading can be related to eustatic changes in sea level, glaciations, and mass extinctions. There may also be connections, through changes in the rate of mantle convection, to the earth's magnetic polarity bias and rotation rate.  相似文献   


3.
The lithospheric sinking along subduction zones is part of the mantle convection. Therefore, computing the volume of lithosphere recycled within the mantle by subducting slabs quantifies the equivalent amount of mantle that should be displaced, for the mass conservation criterion. The rate of subduction is constrained by the convergence rate between upper and lower plates and the motion of the subduction hinge H that may either converge or diverge relative to the upper plate. Here, starting from the analysis of the slab hinge kinematics, we evaluate the subduction rate at 31 subduction zones worldwide, useful to compute volumes of sinking lithosphere into the mantle. Our results show that ∼190 km3/yr and ∼88 km3/yr of lithospheric slabs are currently subducting below H-divergent and H-convergent subduction zones, respectively. We also propose supporting numerical models providing asymmetric volumes of the subducted lithosphere, using the subduction rate instead of plate convergence, as boundary condition. Furthermore, H-divergent subduction zones appear to be coincident with subductions having “westward”-directed slabs, whereas H-convergent subduction zones are mostly compatible with those that have “eastward-to-northeastward”-directed slabs. On the basis of this geographical polarity, our lithospheric volume estimation gives ∼214 km3/yr and ∼88 km3/yr of subducting lithosphere, respectively. This entails that W-directed subduction zones contribute more than twice in lithospheric sinking into the mantle with respect to E-to-NE-directed ones. In accordance with the conservation of mass principle, this volumetric asymmetry in the mantle suggests a displacement of ∼120 km3/yr of mantle material from west to east, providing a constraint for global asymmetric mantle convection.  相似文献   

4.
Garnet‐bearing peridotite lenses are minor but significant components of most metamorphic terranes characterized by high‐temperature eclogite facies assemblages. Most peridotite intrudes when slabs of continental crust are subducted deeply (60–120 km) into the mantle, usually by following oceanic lithosphere down an established subduction zone. Peridotite is transferred from the resulting mantle wedge into the crustal footwall through brittle and/or ductile mechanisms. These ‘mantle’ peridotites vary petrographically, chemically, isotopically, chronologically and thermobarometrically from orogen to orogen, within orogens and even within individual terranes. The variations reflect: (1) derivation from different mantle sources (oceanic or continental lithosphere, asthenosphere); (2) perturbations while the mantle wedges were above subducting oceanic lithosphere; and (3) changes within the host crustal slabs during intrusion, subduction and exhumation. Peridotite caught within mantle wedges above oceanic subduction zones will tend to recrystallize and be contaminated by fluids derived from the subducting oceanic crust. These ‘subduction zone peridotites’ intrude during the subsequent subduction of continental crust. Low‐pressure protoliths introduced at shallow (serpentinite, plagioclase peridotite) and intermediate (spinel peridotite) mantle depths (20–50 km) may be carried to deeper levels within the host slab and undergo high‐pressure metamorphism along with the enclosing rocks. If subducted deeply enough, the peridotites will develop garnet‐bearing assemblages that are isofacial with, and give the same recrystallization ages as, the eclogite facies country rocks. Peridotites introduced at deeper levels (50–120 km) may already contain garnet when they intrude and will not necessarily be isofacial or isochronous with the enclosing crustal rocks. Some garnet peridotites recrystallize from spinel peridotite precursors at very high temperatures (c. 1200 °C) and may derive ultimately from the asthenosphere. Other peridotites are from old (>1 Ga), cold (c. 850 °C), subcontinental mantle (‘relict peridotites’) and seem to require the development of major intra‐cratonic faults to effect their intrusion.  相似文献   

5.
蛇绿岩型金刚石和铬铁矿深部成因   总被引：5，自引：0，他引：5  
地球上的原生金刚石主要有3种产出类型,分别来自大陆克拉通下的深部地幔金伯利岩型金刚石、板块边界深俯冲变质岩中超高压变质型金刚石,和陨石坑中的陨石撞击型金刚石。在全球5个造山带的10处蛇绿岩的地幔橄榄岩或铬铁矿中均发现金刚石和其他超高压矿物的基础上,我们提出地球上一种新的天然金刚石产出类型,命名为蛇绿岩型金刚石。认为蛇绿岩型金刚石普遍存在于大洋岩石圈的地幔橄榄岩中,并提出蛇绿岩型金刚石和铬铁矿的深部成因模式。认为早期俯冲的地壳物质到达地幔过渡带(410~660 km深度)后被肢解,加入到周围的强还原流体和熔体中,当熔融物质向上运移到地幔过渡带顶部,铬铁矿和周围的地幔岩石以及流体中的金刚石等深部矿物一并结晶,之后,携带金刚石的铬铁矿和地幔岩石被上涌的地幔柱带至浅部,经历了洋盆的拉张和俯冲阶段,最终在板块边缘就位。  相似文献   

6.
Oceanic plateaus, aseismic ridges or seamount chains all have a thickened crust and their subduction has been proposed as a possible mechanism to explain the occurrence of flat subduction and related absence of arc magmatism below Peru, Central Chile and at the Nankai Trough (Japan). Their extra compositional buoyancy could prohibit the slab from sinking into the mantle. With a numerical thermochemical convection model, we simulated the subduction of an oceanic lithosphere that contains an oceanic crustal plateau of 18-km thickness. With a systematic variation, we examined the required physical parameters to obtain shallow flat subduction. Metastability of the basaltic crust in the eclogite stability field is of crucial importance for the slab to remain buoyant throughout the subduction process. In a 44-Ma-old subducting plate, basalt must be able to survive a temperature of 600–700 °C to keep the plate buoyant sufficiently long to cause a flat-slab segment. We found that the maximum yield stress in the slab must be limited to about 600 MPa to allow for the necessary bending to the horizontal. Young slabs show flat subduction for larger parameter ranges than old slabs, since they are less gravitationally unstable and show less resistance against bending. Hydrous weakening of the mantle wedge area and lowermost continent are required to allow for the necessary deformation of a change in subduction style from steep to flat. The maximum flat slab extent is about 300 km, which is sufficient to explain the observed shallow flat subduction near the Nankai Trough (Japan). However, additional mechanisms, such as active overthrusting by an overriding continental plate, need to be invoked to explain the flat-slab segments up to 500 km long below Peru and Central Chile.  相似文献   

7.
《地学前缘(英文版)》2020,11(4):1219-1229
We investigate the effect of the westerly rotation of the lithosphere on the active margins that surround the Americas and find good correlations between the inferred easterly-directed mantle counterflow and the main structural grain and kinematics of the Andes and Sandwich arc slabs.In the Andes,the subduction zone is shallow and with low dip,because the mantle flow sustains the slab;the subduction hinge converges relative to the upper plate and generates an uplifting doubly verging orogen.The Sandwich Arc is generated by a westerly-directed SAM(South American) plate subduction where the eastward mantle flow is steepening and retreating the subduction zone.In this context,the slab hinge is retreating relative to the upper plate,generating the backarc basin and a low bathymetry single-verging accretionary prism.In Central America,the Caribbean plate presents a more complex scenario:(a) To the East,the Antilles Arc is generated by westerly directed subduction of the SAM plate,where the eastward mantle flow is steepening and retreating the subduction zone.(b) To the West,the Middle America Trench and Arc are generated by the easterly-directed subduction of the Cocos plate,where the shallow subduction caused by eastward mantle flow in its northern segment gradually steepens to the southern segment as it is infered by the preexisting westerly-directed subduction of the Caribbean Plateau.In the frame of the westerly lithospheric flow,the subduction of a divergent active ridge plays the role of introducing a change in the oceanic/continental plate's convergence angle,such as in NAM(North American)plate with the collision with the Pacific/Farallon active ridge in the Neogene(Cordilleran orogenic type scenario).The easterly mantle drift sustains strong plate coupling along NAM,showing at Juan de Fuca easterly subducting microplate that the subduction hinge advances relative to the upper plate.This lower/upper plate convergence coupling also applies along strike to the neighbor continental strike slip fault systems where subduction was terminated(San Andreas and Queen Charlotte).The lower/upper plate convergence coupling enables the capture of the continental plate ribbons of Baja California and Yakutat terrane by the Pacific oceanic plate,transporting them along the strike slip fault systems as para-autochthonous terranes.This Cordilleran orogenic type scenario,is also recorded in SAM following the collision with the Aluk/Farallon active ridge in the Paleogene,segmenting SAM margin into the eastwardly subducting Tupac Amaru microplate intercalated between the proto-LiquineOfqui and Atacama strike slip fault systems,where subduction was terminated and para-autochthonous terranes transported.In the Neogene,the convergence of Nazca plate with respect to SAM reinstalls subduction and the present Andean orogenic type scenario.  相似文献   

8.
To better understand the lithosphere mantle collision tectonics between the India plate and Asia plate, we determine three dimensional P wave velocity structure beneath western Tibet using 27,439 arrival times from 2,174 teleseismic events recorded by 182 stations of Hi-CLIMB Project and 16 stations in the north of Hi-CLMB. Our tomographic images show the velocity structure significantly difference beneath northern and southern Qiangtang, which can further prove that the Longmu Co-Shuanghu ophiolitic belt is a significant tectonic boundary fault zone. There are two prominent high velocity anomalies and two prominent low velocity anomalies in our images. One obvious high velocity anomalies subduct beneath the Tibet at the long distance near 34°N, whereas it is broke off by an obvious low velocity anomaly under the IYS. We interpret them as northward subducting Indian lithosphere mantle and the low velocity anomanly under IYS likely reflects mantle material upwelling triggered by tearing of the northward subduction Indian lithosphere. The other prominent high velocity anomaly was imaged at a depth from 50 km to 200 km horizontal and up to the northern Qiangtang with its southern edge extending to about 34°N through Hoh Xil block. We infer it as the southward subducting Asia lithosphere mantle. The other widely low velocity anomaly beneath the Qiangtang block lies in the gap between the frontier of India plate and Asia plate, where is the channel of mantle material upwelling.  相似文献   

9.
Thermal and chemical gradients at the boundary of a subducting plate and suprasubduction mantle lead to a variety of poorly understood geologic processes. This paper reports the results of experiments simulating interaction between olivine (Ol, mantle analog) and carbonated glaucophane schist (Gls, analog of the upper layer of the subducted crust) under the P-t conditions of a ‘hot’ subduction zone. The experiments were carried out at a pressure of P = 25 kbar under temperature gradient conditions (t min Gls = 720°C and t max Ol = 1000°C) and at a constant temperature of t = 800°C corresponding to the boundary between the materials in the gradient experiment. A comparison of experimental data obtained using two different methods showed that the temperature gradient experiment reproduced the character of schist-olivine interaction under isothermal conditions and provided additional information on the effect of temperature on mineral reactions. Orthopyroxene occurs in the experimental products in different textural positions, forming a layer (with or without magnesite) at the base of the olivine zone or separate grains and intergrowths with magnesite at the boundary of olivine grains. The development of orthopyroxene and carbonate redeposition are described by reactions between olivine and aqueous fluid components, SiO2 and CO2, at $a_{SiO_2 } = 0.23$ and $a_{CO_2 } = 0.07$ . The calculated silica content in the fluid under such thermodynamic conditions is 0.39 mol/kg H2O. Given these parameters, the estimated SiO2 flux at a depth of ～80 km from the downgoing slab of the Cascadia subduction zone in the northwester United States is 180 t/yr at a very moderate (for the considered depth level) aqueous fluid flux of one million moles per year per kilometer. Modern concepts on convective flows initiated by a subducting slab in the mantle wedge allow us to suggest that orthopyroxene-enriched ultramafic rocks must occur both above the areas of the release of volatile components and silica from the slab and at deeper levels of subduction zones.  相似文献   

10.
Tonga and Mariana fore-arc peridotites, inferred to representtheir respective sub-arc mantle lithospheres, are compositionallyhighly depleted (low Fe/Mg) and thus physically buoyant relativeto abyssal peridotites representing normal oceanic lithosphere(high Fe/Mg) formed at ocean ridges. The observation that thedepletion of these fore-arc lithospheres is unrelated to, andpre-dates, the inception of present-day western Pacific subductionzones demonstrates the pre-existence of compositional buoyancycontrast at the sites of these subduction zones. These observationsallow us to suggest that lateral compositional buoyancy contrastwithin the oceanic lithosphere creates the favoured and necessarycondition for subduction initiation. Edges of buoyant oceanicplateaux, for example, mark a compositional buoyancy contrastwithin the oceanic lithosphere. These edges under deviatoriccompression (e.g. ridge push) could develop reverse faults withcombined forces in excess of the oceanic lithosphere strength,allowing the dense normal oceanic lithosphere to sink into theasthenosphere beneath the buoyant overriding oceanic plateaux,i.e. the initiation of subduction zones. We term this conceptthe ‘oceanic plateau model’. This model explainsmany other observations and offers testable hypotheses on importantgeodynamic problems on a global scale. These include (1) theorigin of the 43 Ma bend along the Hawaii–Emperor SeamountChain in the Pacific, (2) mechanisms of ophiolite emplacement,(3) continental accretion, etc. Subduction initiation is notunique to oceanic plateaux, but the plateau model well illustratesthe importance of the compositional buoyancy contrast withinthe lithosphere for subduction initiation. Most portions ofpassive continental margins, such as in the Atlantic where largecompositional buoyancy contrast exists, are the loci of futuresubduction zones. KEY WORDS: subduction initiation; compositional buoyancy contrast; oceanic lithosphere; plate tectonics; mantle plumes; hotspots; oceanic plateaux; passive continental margins; continental accretion; mantle peridotites; ophiolites  相似文献   

11.
五十年前板块构造理论的诞生是地球科学领域的一场革命,它为理解地球如何运作构建了基本框架。过去五十年对该理论的进一步研究告诉我们地质过程最终都是地球热损失的结果。例如,大洋岩石圈板块在洋中脊形成,其运动和增生以及最终通过俯冲带进入地幔导致地幔冷却降温,从而导致大规模的地幔对流。亦即,板块构造的直接驱动力是俯冲大洋岩石圈板块的下沉力。因此,没有俯冲带就没有板块构造,但是俯冲带如何开始仍然有争议。对俯冲起始的研究从未中断,有数值模拟也有地质推断。2014年在西太平洋用三个IODP航次(350、351和352)来检验“自发”和“诱发”俯冲开始的想法。所有这些努力都值得肯定,但这些是无法检验的想法。无法检验意味着没有结果。本文介绍至今唯一可用地质学方法检验的假说,亦即“岩石圈内横向物质组成差异导致的浮力差是俯冲带形成的起因”。这种浮力差位于海底高原的边部和被动大陆边缘,因此这些部位是未来俯冲带起始的必然轨迹。在远离这些部位的正常洋盆内因缺乏浮力差而俯冲带不可能起始。换句话说,“所有岛弧一定有大陆(或海底高原)基底”,这可以通过采集和研究岛弧基底岩石来验证。  相似文献   

12.
The Japan Trench subduction zone, located east of NE Japan, has regional variation in seismicity. Many large earthquakes occurred in the northern part of Japan Trench, but few in the southern part. Off Miyagi region is in the middle of the Japan Trench, where the large earthquakes (M > 7) with thrust mechanisms have occurred at an interval of about 40 years in two parts: inner trench slope and near land. A seismic experiment using 36 ocean bottom seismographs (OBS) and a 12,000 cu. in. airgun array was conducted to determine a detailed, 2D velocity structure in the forearc region off Miyagi. The depth to the Moho is 21 km, at 115 km from the trench axis, and becomes progressively deeper landward. The P-wave velocity of the mantle wedge is 7.9–8.1 km/s, which is typical velocity for uppermost mantle without large serpentinization. The dip angle of oceanic crust is increased from 5–6° near the trench axis to 23° 150 km landward from the trench axis. The P-wave velocity of the oceanic uppermost mantle is as small as 7.7 km/s. This low-velocity oceanic mantle seems to be caused by not a lateral anisotropy but some subduction process. By comparison with the seismicity off Miyagi, the subduction zone can be divided into four parts: 1) Seaward of the trench axis, the seismicity is low and normal fault-type earthquakes occur associated with the destruction of oceanic lithosphere. 2) Beneath the deformed zone landward of the trench axis, the plate boundary is characterized as a stable sliding fault plain. In case of earthquakes, this zone may be tsunamigenic. 3) Below forearc crust where P-wave velocity is almost 6 km/s and larger: this zone is the seismogenic zone below inner trench slope, which is a plate boundary between the forearc and oceanic crusts. 4) Below mantle wedge: the rupture zones of thrust large earthquakes near land (e.g. 1978 off Miyagi earthquake) are located beneath the mantle wedge. The depth of the rupture zones is 30–50 km below sea level. From the comparison, the rupture zones of large earthquakes off Miyagi are limited in two parts: plate boundary between the forearc and oceanic crusts and below mantle wedge. This limitation is a rare case for subduction zone. Although the seismogenic process beneath the mantle wedge is not fully clarified, our observation suggests the two possibilities: earthquake generation at the plate boundary overridden by the mantle wedge without serpentinization or that in the subducting slab.  相似文献   

13.
Slow–ultraslow spreading oceans are mostly floored by mantle peridotites and are typified by rifted continental margins, where subcontinental lithospheric mantle is preserved. Structural and petrologic investigations of the high-pressure (HP) Alpine Voltri Massif ophiolites, which were derived from the Late Jurassic Ligurian Tethys fossil slow–ultraslow spreading ocean, reveal the fate of the oceanic peridotites/serpentinites during subduction to depths involving eclogite-facies conditions, followed by exhumation.

The Ligurian Tethys was formed by continental extension within the Europe–Adria lithosphere and consisted of sea-floor exposed mantle peridotites with an uppermost layer of oceanic serpentinites and of subcontinental lithospheric mantle at the rifted continental margins. Plate convergence caused eastward subduction of the oceanic lithosphere of the Europe plate and the uppermost serpentinite layer of the subducting slab formed an antigorite serpentinite-subduction channel. Sectors of the rather unaltered mantle lithosphere of the Adria extended margin underwent ablative subduction and were detached, embedded, and buried to eclogite-facies conditions within the serpentinite-subduction channel. At such P–T conditions, antigorite serpentinites from the oceanic slab underwent partial HP dehydration (antigorite dewatering and growth of new olivine). Water fluxing from partial dehydration of host serpentinites caused partial HP hydration (growth of Ti-clinohumite and antigorite) of the subducted Adria margin peridotites. The serpentinite-subduction channel (future Beigua serpentinites), acting as a low-viscosity carrier for high-density subducted rocks, allowed rapid exhumation of the almost unaltered Adria peridotites (future Erro–Tobbio peridotites) and their emplacement into the Voltri Massif orogenic edifice. Over in the past 35 years, this unique geologic architecture has allowed us to investigate the pristine structural and compositional mantle features of the subcontinental Erro–Tobbio peridotites and to clarify the main steps of the pre-oceanic extensional, tectonic–magmatic history of the Europe–Adria asthenosphere–lithosphere system, which led to the formation of the Ligurian Tethys.

Our present knowledge of the Voltri Massif provides fundamental information for enhanced understanding, from a mantle perspective, of formation, subduction, and exhumation of oceanic and marginal lithosphere of slow–ultraslow spreading oceans.  相似文献   

14.
迟效国  张蕊  范乐夫  王利民 《岩石学报》2017,33(10):3011-3026
近年来地震层析成像揭示出可可西里-西昆仑中新世-第四纪钾质火山岩带下方存在一个深达900km的巨型地幔低速体,空间上与新特提斯洋和印度大陆俯冲断离板片沉降形成的冷地幔下降流共存(Replumaz et al.,2010a,b),两者构成统一的地幔对流体系。研究表明,羌塘古近纪(60~34Ma)钠质玄武岩和高钾钙碱性玄武岩均以富含Ti O2、P2O5和大离子亲石元素为特征,主体具有与OIB相近的微量元素组成和弱亏损的Sr、Nd同位素特征,指示岩浆起源于软流圈的上涌熔融,但Nb、Ta的弱亏损表明岩浆源区有岩石圈地幔熔融组分的贡献。羌塘(32~26Ma)碱性钾质玄武岩与可可西里和西昆仑中新世以来喷发的钾质玄武岩的地球化学性质相近,不相容元素比值和Sr、Nd同位素组成指示岩浆起源于古俯冲地幔楔的低程度熔融。这些特征表明藏北软流圈上涌作用始于古近纪,初始上涌中心位于羌塘地体之下。计算表明藏北古近纪火山岩距离当时的印度大陆北缘的最大和最小距离约为1250km和700km,与现今可可西里地幔低速体的南、北边界与印度大陆北缘的距离相近,支持羌塘古近纪地幔上涌作用也是受藏南冷地幔下降流所驱动。青藏高原在南北缩短过程中不仅表现为软流圈自西向东挤出流动,地幔垂向对流也是其重要的运动形式,在地幔上升流形成的藏北热幔区内,地壳的水平缩短增厚与岩石圈地幔的伸展减薄呈脉动式共存。藏南冷地幔下降流和藏北热地幔上升流的持续北移是导致藏北后碰撞火山岩时空迁移的主要控制因素。  相似文献   

15.
《Gondwana Research》2014,25(2):494-508
Large segments of the continental crust are known to have formed through the amalgamation of oceanic plateaus and continental fragments. However, mechanisms responsible for terrane accretion remain poorly understood. We have therefore analysed the interactions of oceanic plateaus with the leading edge of the continental margin using a thermomechanical–petrological model of an oceanic-continental subduction zone with spontaneously moving plates. This model includes partial melting of crustal and mantle lithologies and accounts for complex rheological behaviour including viscous creep and plastic yielding. Our results indicate that oceanic plateaus may either be lost by subduction or accreted onto continental margins. Complete subduction of oceanic plateaus is common in models with old (> 40 Ma) oceanic lithosphere whereas models with younger lithosphere often result in terrane accretion. Three distinct modes of terrane accretion were identified depending on the rheological structure of the lower crust and oceanic cooling age: frontal plateau accretion, basal plateau accretion and underplating plateaus.Complete plateau subduction is associated with a sharp uplift of the forearc region and the formation of a basin further landward, followed by topographic relaxation. All crustal material is lost by subduction and crustal growth is solely attributed to partial melting of the mantle.Frontal plateau accretion leads to crustal thickening and the formation of thrust and fold belts, since oceanic plateaus are docked onto the continental margin. Strong deformation leads to slab break off, which eventually terminates subduction, shortly after the collisional stage has been reached. Crustal parts that have been sheared off during detachment melt at depth and modify the composition of the overlying continental crust.Basal plateau accretion scrapes oceanic plateaus off the downgoing slab, enabling the outward migration of the subduction zone. New incoming oceanic crust underthrusts the fractured terrane and forms a new subduction zone behind the accreted terrane. Subsequently, hot asthenosphere rises into the newly formed subduction zone and allows for extensive partial melting of crustal rocks, located at the slab interface, and only minor parts of the former oceanic plateau remain unmodified.Oceanic plateaus may also underplate the continental crust after being subducted to mantle depth. (U)HP terranes are formed with peak metamorphic temperatures of 400–700 °C prior to slab break off and subsequent exhumation. Rapid and coherent exhumation through the mantle along the former subduction zone at rates comparable to plate tectonic velocities is followed by somewhat slower rates at crustal levels, accompanied by crustal flow, structural reworking and syndeformational partial melting. Exhumation of these large crustal volumes leads to a sharp surface uplift.  相似文献   

16.
Structural and fabric analysis of the well-exposed Hilti mantlesection, Oman ophiolite, suggests that shear zone development,which may have resulted from oceanic plate fragmentation, wasinfluenced by pre-existing mantle fabric present at the paleo-ridge.Detailed structural mapping in the mantle section revealed agently undulating structure with an east–west flow direction.A NW–SE strike-slip shear zone cuts across this horizontalstructure. The crystal preferred orientation (CPO) of olivinewithin the foliation is dominated by (010) axial patterns ratherthan more commonly observed (010)[100] patterns, suggestingthat the horizontal flow close to the Moho involved non-coaxialflow. Olivine CPO within the shear zone formed at low temperatureis characterized by (001)[100] patterns and a sinistral senseof shear. The olivine CPO becomes weaker with progressive mylonitizationand accompanying grain size reduction, and ultimately developsinto an ultra-mylonite with a random CPO pattern. The olivine[010]-axis is consistently sub-vertical, even where the horizontalfoliation has been rotated to a sub-vertical orientation withinthe shear zone. These observations suggest that the primarymechanical anisotropy (mantle fabric) has been readily transformedinto a secondary structure (shear zone) with minimum modification.This occurred as a result of a change of the olivine slip systemsduring oceanic detachment and related tectonics during cooling.We propose that primary olivine CPO fabrics may play a significantrole in the subsequent structural development of the mantle.Thus, the structural behavior of oceanic mantle lithosphereduring subduction and obduction may be strongly influenced byinitial mechanical anisotropy developed at an oceanic spreadingcenter. KEY WORDS: mantle lithosphere; anisotropy; shear zone; olivine CPO; Oman ophiolite  相似文献   

17.
《Gondwana Research》2010,17(3-4):414-430
The East Asian continental margin is underlain by stagnant slabs resulting from subduction of the Pacific plate from the east and the Philippine Sea plate from the south. We classify the upper mantle in this region into three major domains: (a) metasomatic–metamorphic factory (MMF), subduction zone magma factory (SZMF), and the ‘big mantle wedge’ (BMW). Whereas the convection pattern is anticlockwise in the MMF domain, it is predominantly clockwise in the SZMF and BMW, along a cross section from the south. Here we define the MMF as a small wedge corner which is driven by the subducting Pacific plate and dominated by H2O-rich fluids derived by dehydration reactions, and enriched in large ion lithophile elements (LILE) which cause the metasomatism. The SZMF is a zone intermediate between MMF and BMW domains and constitutes the main region of continental crust production by partial melting through wedge counter-corner flow. Large hydrous plume generated at about 200 km depth causes extensive reduction in viscosity and the smaller scale hydrous plumes between 60 km and 200 km also bring about an overall reduction in the viscosity of SZMF. More fertile and high temperature peridotites are supplied from the entrance to this domain. The domain extends obliquely to the volcanic front and then swings back to the deep mantle together with the subducting slab. The BMW occupies the major portion of upper mantle in the western Pacific and convects largely with a clockwise sense removing the eastern trench oceanward. Sporadic formation of hydrous plume at the depth of around 410 km and the curtain flow adjacent to the trench cause back arc spreading. We envisage that the heat source in BMW could be the accumulated TTG (tonalite–trondhjemite–granodiorite) crust on the bottom of the mantle transition zone. The ongoing process of transportation of granitic crust into the mantle transition zone is evident from the deep subduction of five intra-oceanic arcs on the subducting Philippine Sea plate from the south, in addition to the sediment trapped subduction by the Pacific plate and Philippine Sea plate. The dynamics of MMF, SZMF and BMW domains are controlled by the angle of subduction; a wide zone of MMF in SW Japan is caused by shallow angle subduction of the Philippine Sea plate and the markedly small MMF domain in the Mariana trench is due to the high angle subduction of Pacific plate. The domains in NE Japan and Kyushu region are intermediate between these two. During the Tertiary, a series of marginal basins were formed because of the nearly 2000 km northward shift of the subduction zone along the southern margin of Tethyan Asia, which may be related to the collision of India with Asia and the indentation. The volume of upper mantle under Asia was reduced extensively on the southern margin with a resultant oceanward trench retreat along the eastern margin of Asia, leading to the formation of a series of marginal basins. The western Pacific domain in general is characterized by double-sided subduction; from the east by the oldest Pacific plate and from the south by the oldest Indo-Australian plate. The old plates are hence hydrated extensively even in their central domains and therefore of low temperature. The cracks have allowed the transport of water into the deeper portions of the slab and these domains supply hydrous fluids even to the bottom of the upper mantle. Thus, a fluid dominated upper mantle in the western Pacific drives a number of microplates and promote the plate boundary processes.  相似文献   

18.
Melting of subducting oceanic lithosphere and associated melt-mantle interactions in convergent plate margins require specific geodynamic environment that allows the oceanic slab to be abnormally heated. Here we focus on the Early Mesozoic mafic rocks and granite porphyry, which provide insights into slab melting processes associated with final closure of the Paleo-Asian Ocean. The granite porphyry samples are calc-alkaline and distinguished by high Sr contents, strong depletion of heavy rare earth elements, resulting in high (La/Yb)N and Sr/Y ratios, and negligible Eu anomalies. Based on their high Na2O and MgO, low K2O contents, positive εHf(t) and εNd(t) and low (87Sr/86Sr)i values, we propose that the granite porphyry was likely derived from partial melting of subducting Paleo-Asian oceanic crust. The Nb-enriched mafic rocks are enriched in Rb, Th, U, Pb and K, and depleted in Nb, Ta, Ba, P and Ti, corroborating a subduction-related origin. Their heterogeneous Sr-Nd-Hf-O isotopic compositions and other geochemical features suggest that they were likely derived from partial melting of peridotitic mantle wedge interacted with oceanic slab-derived adakitic melts. Trace element and isotope modeling results and elevated zircon δ18O values suggest variable subducting sediments input into the mantle wedge, dominated by terrigenous sediments. Synthesizing the widely-developed bimodal rock associations, conjugated dikes, thermal metamorphism, tectonic characteristics, paleomagnetic constraints, and paleogeographical evidence along the Solonke-Changchun suture zone, we identify a slab window triggered by slab break-off, which accounts for slab melting and formation of the Nb-enriched mafic rocks and associated adakitic granite porphyry in southeastern Central Asian Orogenic Belt.  相似文献   

19.
It is being accepted that earthquakes in subducting slab are caused by dehydration reactions of hydrous minerals. In the context of this “dehydration embrittlement” hypothesis, we propose a new model to explain key features of subduction zone magmatism on the basis of hydrous phase relations in peridotite and basaltic systems determined by thermodynamic calculations and seismic structures of Northeast Japan arc revealed by latest seismic studies. The model predicts that partial melting of basaltic crust in the subducting slab is an inevitable consequence of subduction of hydrated oceanic lithosphere. Aqueous fluids released from the subducting slab also cause partial melting widely in mantle wedge from just above the subducting slab to just below overlying crust at volcanic front. Hydrous minerals in the mantle wedge are stable only in shallow (< 120 km) areas, and are absent in the layer that is dragged into deep mantle by the subducting slab. The position of volcanic front is not restricted by dehydration reactions in the subducting slab but is controlled by dynamics of mantle wedge flow, which governs the thermal structure and partial melting regime in the mantle wedge.  相似文献   

20.
The structural coupling is a common geological phenomenon. The structural differences between eastern and western active continental margins of modern Pacific and between paleo-Pacific and modern-Pacific continental margins are related to the characteristics and status of the subducting oceanic plate, namely, 1. subducting angle; 2. change in subducting angle; 3. subducting velocity; 4. change in subducting velocity; 5. subduction depth; 6. horizontal distance between the leading edge of the subducting plate and the trench; 7. the structural form of the subducting plate at the 670kin boundary between the upper and lower mantle; 8. the displacement and the direction of displacement of subducting plate. The control and influence toward the shallow-level structures by the deep-level structural activities is a detailed representation of the structural coupling on active continental margin. The basin-maintain coupling phenomenon is an intracontinental structural coupling. The far field effect of collision be  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号