首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 515 毫秒
1.
Rare earth element (REE) concentrations are reported for a large suite of seafloor vent fluids from four hydrothermal systems in the Manus back-arc basin (Vienna Woods, PACMANUS, DESMOS and SuSu Knolls vent areas). Sampled vent fluids show a wide range of absolute REE concentrations and chondrite-normalized (REEN) distribution patterns (LaN/SmN ∼ 0.6-11; LaN/YbN ∼ 0.6 - 71; ). REEN distribution patterns in different vent fluids range from light-REE enriched, to mid- and heavy-REE enriched, to flat, and have a range of positive Eu-anomalies. This heterogeneity contrasts markedly with relatively uniform REEN distribution patterns of mid-ocean ridge hydrothermal fluids. In Manus Basin fluids, aqueous REE compositions do not inherit directly or show a clear relationship with the REE compositions of primary crustal rocks with which hydrothermal fluids interact. These results suggest that the REEs are less sensitive indicators of primary crustal rock composition despite crustal rocks being the dominant source of REEs in submarine hydrothermal fluids. In contrast, differences in aqueous REE compositions are consistently correlated with differences in fluid pH and ligand (chloride, fluoride and sulfate) concentrations. Our results suggest that the REEs can be used as an indicator of the type of magmatic acid volatile (i.e., presence of HF, SO2) degassing in submarine hydrothermal systems. Additional fluid data suggest that near-seafloor mixing between high-temperature hydrothermal fluid and locally entrained seawater at many vent areas in the Manus Basin causes anhydrite precipitation. Anhydrite effectively incorporates REE and likely affects measured fluid REE concentrations, but does not affect their relative distributions.  相似文献   

2.
《Applied Geochemistry》2002,17(11):1457-1466
Ocean Drilling Program (ODP) Leg 169, which was conducted in 1996 provided an opportunity to study the gas geochemistry in the deeper part of the sediment-rich hydrothermal system in Escanaba Trough. Gas void samples obtained from the core liner were analyzed and their results were compared with analytical data of vent fluid samples collected by a submersible dive program in 1988. The gas geochemistry of the pore fluids consisted mostly of a hydrothermal component and was basically the same as that of the vent fluids. The He isotope ratios (R/RA=5.6–6.6) indicated a significant mantle He contribution and the C isotopic compositions of the hydrocarbons [δ13C(CH4)=−43‰, δ13C(C2H6)=−20‰] were characterized as a thermogenic origin caused by hydrothermal activity. On the other hand, the pore fluids in sedimentary layers away from the hydrothermal fields showed profiles which reflected lateral migration of the hydrothermal hydrocarbons and abundant biogenic CH4. Helium and C isotope systematics were shown to represent a hydrothermal component and useful as indicators for their distribution beneath the seafloor. Similarities in He and hydrocarbon signatures to that of the Escanaba Trough hydrothermal system were found in some terrestrial natural gases, which suggested that seafloor hydrothermal activity in sediment-rich environments would be one of the possible petroleum hydrocarbon generation scenarios in unconventional geological settings.  相似文献   

3.
Field and experimental investigations demonstrate the chemistry of mid-ocean ridge hydrothermal vent fluids reflects fluid-mineral reaction at higher temperatures than those typically measured at the seafloor. To account for this and, in turn, be able to better constrain sub-seafloor hydrothermal processes, we have developed an empirical geothermometer based on the dissolved Fe/Mn ratio in high-temperature fluids. Using data from basalt alteration experiments, the relationship; T (°C) = 331.24 + 112.41*log[Fe/Mn] has been calibrated between 350 and 450 °C. The apparent Fe-Mn equilibrium demonstrated by the experimental data is in good agreement with natural vent fluids, suggesting broad applicability. When used in conjunction with constraints imposed by quartz solubility, associated sub-seafloor pressures can be estimated for basalt-hosted systems. As an example, this methodology is used to interpret new data from 13°N on the East Pacific Rise, where high-temperature fluids both enriched and depleted in chloride (339-646 mmol/kg), relative to seawater, are actively venting within a close proximity. Accounting for these variable salinities, active phase separation is clearly taking place at 13°N, yet the fluid Fe/Mn ratios and the silica concentrations suggest equilibration at temperatures less than those coinciding with the two-phase region. These data show the chloride-enriched fluid reflects the highest temperature and pressure (∼432 °C, 400 bars) of equilibration, consistent with circulation near the top of the inferred magma chamber. This is in agreement with the elevated CO2 concentration relative to the chloride-depleted fluids. The noted temperature derived from the Fe/Mn geothermometer is higher than the critical temperature for a fluid of equivalent salinity. This carries the important implication that, despite being chloride-enriched relative to seawater, these fluids evolved as the vapor component of even higher salinity brine.  相似文献   

4.
《Applied Geochemistry》2002,17(11):1381-1399
Geochemical and isotopic studies of pore fluids and solid phases recovered from the Dead Dog and Bent Hill hydrothermal sites in Middle Valley (Ocean Drilling Program Leg 169) have been compared with similar data obtained previously from these sites during Ocean Drilling Program Leg 139. Although generally the hydrothermal systems reflect non-steady state conditions, the data allow an assessment of the history of the hydrothermal processes. Sediment K/Al ratios as well as the distribution of anhydrite in the sediments suggest that the Dead Dog hydrothermal field has been, and still is, active. In contrast, similar data in the Bent Hill hydrothermal field indicate a waning of hydrothermal activity. Pore fluid and hydrothermal vent data in the Dead Dog hydrothermal field are similar in nature to the data collected during ODP Leg 139. In the area of the Bent Hill sulfide deposit, however, the pore water data indicate that recent wholesale flushing of the sediment column with relatively unaltered seawater has obliterated a previous record of hydrothermal activity in the pore fluids. Data from the deepest part of Hole 1035A in the Bent Hill locality show the presence of hydrothermal fluids at greater depths in this area. This suggests the origin of the hydrothermal fluids found to be emanating from Hole 1035F, which constitutes one of the first man made hydrothermal vents in the Middle Valley hydrothermal system. Similarly, CORKed Hole 858G, because of seal failures, has acted as a hydrothermal vent, with sulfide deposits forming inside the CORK.  相似文献   

5.
Hydrothermal vent fluids from Middle Valley, a sediment-covered vent field located on the northern Juan de Fuca Ridge, were sampled in July, 2000. Eight different vents with exit temperatures of 186-281 °C were sampled from two areas of venting: the Dead Dog and ODP Mound fields. Fluids from the Dead Dog field are characterized by higher concentrations of ΣNH3 and organic compounds (C1-C4 alkanes, ethene, propene, benzene and toluene) compared with fluids from the ODP Mound field. The ODP Mound fluids, however, are characterized by higher C1/(C2 + C3) and benzene:toluene ratios than those from the Dead Dog field. The aqueous organic compounds in these fluids have been derived from both bacterial processes (methanogenesis in low temperature regions during recharge) as well as from thermogenic processes in higher temperature portions of the subsurface reaction zone. As the sediments undergo hydrothermal alteration, carbon dioxide and hydrocarbons are released to solution as organic matter degrades via a stepwise oxidation process. Compositional and isotopic differences in the aqueous hydrocarbons indicate that maximum subsurface temperatures at the ODP Mound are greater than those at the Dead Dog field. Maximum subsurface temperatures were calculated assuming that thermodynamic equilibrium is attained between alkenes and alkanes, benzene and toluene, and carbon dioxide and methane. The calculated temperatures for alkene-alkane equilibrium are consistent with differences in the dissolved Cl concentrations in fluids from the two fields, and confirm that subsurface temperatures at the ODP Mound are hotter than those at the Dead Dog field. Temperatures calculated assuming benzene-toluene equilibrium and carbon dioxide-methane equilibrium are similar to observed exit temperatures, and do not record the hottest subsurface conditions. The difference in subsurface temperatures estimated using organic geochemical thermometers reflects subsurface cooling processes via mixing of a hot, low salinity vapor with a cooler, seawater salinity fluid. Because of the disparate temperature dependence of alkene-alkane and benzene-toluene equilibria, the mixed fluid records both the high and low temperature equilibrium conditions. These calculations indicate that vapor-rich fluids are presently being formed in the crust beneath the ODP Mound, yet do not reach the surface due to mixing with the lower temperature fluids.  相似文献   

6.
Low-temperature (<13°C) diffuse hydrothermal fluids were sampled directly at the seafloor with a specially designed Hydro Bottom Station in the North Fiji Basin and analyzed for gases, major and minor elements, and a large number of trace metals. The fluids were significantly enriched in CO2, Si, Li, Rb, Cs, Ba, Mn, and several trace metals compared to ambient seawater, had high CH4 and H2S concentrations, and had a slightly decreased salinity. Calculated end-member concentrations of the low-temperature fluids show a strong similarity to the neighboring hot vents, implying that the diffuse fluids are hot vent waters diluted by seawater. According to the chemical composition, the sampled fluids derive from vapor-phase fluids produced by subseafloor boiling and phase separation. Compared to hot vents from other regions, Mn, Fe, and other trace metal concentrations are low. Subsurface metal sulfide precipitation during cooling and dilution with seawater has further decreased the dissolved metal contents of the diffuse fluids, thus creating a very favorable environment for the hydrothermal fauna, as indicated by a very low Fe/H2S ratio. Therefore, the fluids support high bioproductivity but no hydrothermal mineral precipitation. The emanation of the condensed vapor phase appears to have been stable during the past 10 years; however, the occurrence of metal sulfide particles in some fluid and sediment samples and small areas of dead fauna indicate that the hydrothermal system may be evolving toward the emanation of the stored brine phase.  相似文献   

7.
Processes controlling the composition of seafloor hydrothermal fluids in silicic back-arc or near-arc crustal settings remain poorly constrained despite growing evidence for extensive magmatic-hydrothermal activity in such environments. We conducted a survey of vent fluid compositions from two contrasting sites in the Manus back-arc basin, Papua New Guinea, to examine the influence of variations in host rock composition and magmatic inputs (both a function of arc proximity) on hydrothermal fluid chemistry. Fluid samples were collected from felsic-hosted hydrothermal vent fields located on Pual Ridge (PACMANUS and Northeast (NE) Pual) near the active New Britain Arc and a basalt-hosted vent field (Vienna Woods) located farther from the arc on the Manus Spreading Center. Vienna Woods fluids were characterized by relatively uniform endmember temperatures (273-285 °C) and major element compositions, low dissolved CO2 concentrations (4.4 mmol/kg) and high measured pH (4.2-4.9 at 25 °C). Temperatures and compositions were highly variable at PACMANUS/NE Pual and a large, newly discovered vent area (Fenway) was observed to be vigorously venting boiling (358 °C) fluid. All PACMANUS fluids are characterized by negative δDH2O values, in contrast to positive values at Vienna Woods, suggesting substantial magmatic water input to circulating fluids at Pual Ridge. Low measured pH (25 °C) values (∼2.6-2.7), high endmember CO2 (up to 274 mmol/kg) and negative δ34SH2S values (down to −2.7‰) in some vent fluids are also consistent with degassing of acid-volatile species from evolved magma. Dissolved CO2 at PACMANUS is more enriched in 13C (−4.1‰ to −2.3‰) than Vienna Woods (−5.2‰ to −5.7‰), suggesting a contribution of slab-derived carbon. The mobile elements (e.g. Li, K, Rb, Cs and B) are also greatly enriched in PACMANUS fluids reflecting increased abundances in the crust there relative to the Manus Spreading Center. Variations in alkali and dissolved gas abundances with Cl at PACMANUS and NE Pual suggest that phase separation has affected fluid chemistry despite the low temperatures of many vents. In further contrast to Vienna Woods, substantial modification of PACMANUS/NE Pual fluids has taken place as a result of seawater ingress into the upflow zone. Consistently high measured Mg concentrations as well as trends of increasingly non-conservative SO4 behavior, decreasing endmember Ca/Cl and Sr/Cl ratios with increased Mg indicate extensive subsurface anhydrite deposition is occurring as a result of subsurface seawater entrainment. Decreased pH and endmember Fe/Mn ratios in higher Mg fluids indicate that the associated mixing/cooling gives rise to sulfide deposition and secondary acidity production. Several low temperature (?80 °C) fluids at PACMANUS/NE Pual also show evidence for anhydrite dissolution and water-rock interaction (fixation of B) subsequent to seawater entrainment. Hence, the evolution of fluid compositions at Pual Ridge reflects the cumulative effects of water/rock interaction, admixing and reaction of fluids exsolved from silicic magma, phase separation/segregation and seawater ingress into upflow zones.  相似文献   

8.
The Lost City Hydrothermal Field at 30°N, near the Mid-Atlantic Ridge, is an off-axis, moderate temperature, high-pH (9-10.8), serpentinite-hosted vent system. The field is hosted on ∼1.5 Ma crust, near the summit of the Atlantis Massif. Within the field, actively venting carbonate chimneys tower up to 60 m above the seafloor, making them the tallest vent structures known. The chemistry of the chimneys and vent fluids is controlled by serpentinization reactions between seawater and underlying peridotite. Mixing of <40-91 °C calcium-rich vent fluids with seawater results in the precipitation of variable mixtures of aragonite, calcite, and brucite. The resultant deposits range from tall, graceful pinnacles to fragile flanges and delicate precipitates that grow outward from fissures in the bedrock. In this study, mineralogy, petrographic analyses, major and trace element concentrations, and Sr isotopic compositions are used to propose a model for the growth and chemical evolution of carbonate chimneys in a serpentinite-hosted environment. Our results show that nascent chimneys are characterized by a porous, interlacing network of aragonite, and brucite minerals that form extremely fragile structures. The chemistry of these young deposits is characterized by ∼10 wt% Ca and up to 27 wt% Mg, extremely low trace metal concentrations, and 87Sr/86Sr isotope ratios near 0.70760. During aging of the chimneys, progressive reactions with seawater result in the dissolution of brucite, the conversion of aragonite to calcite, and infilling of pore spaces with calcite. The oldest chimneys are dominated by calcite, with bulk rock values of up to 36 wt% Ca and <1 wt% Mg. These older structures contain higher concentrations of trace metals (e.g., Mn and Ti), and have Sr isotope ratios near seawater values (0.70908). Exposed ultramafic rocks are prevalent along the Mid-Atlantic, Arctic, and Indian Ocean ridge networks and it is likely that other Lost City-type systems exist.  相似文献   

9.
《Applied Geochemistry》2002,17(11):1435-1456
Geochemical studies of pore fluids and solid phases in two Ocean Drilling Program (ODP) drill sites (Sites 1037 and 1038) in the Escanaba Trough off Northern California have provided further data on the hydrothermal processes associated with the spreading of the Gorda Ridge. Previous work in the area of ODP Site 1038 includes the discovery of a hydrothermal system and associated sulfide deposits centered around an uplifted sediment hill in this sedimented extensional environment. This earlier work provided some insights into the present nature of venting; however, only deep drilling investigations can provide the means to fully understand the genesis and evolution of this system and associated hydrothermal deposits. ODP Leg 169 is the third deep drilling operation to explore the magnitude, genesis, and evolution of hydrothermal systems on sedimented ridges. Previous studies centered on the Guaymas Basin in the Gulf of California and the Middle Valley in the NE Pacific Ocean. Pore water studies in the reference ODP Site 1037 and in the hydrothermally active area of ODP Site 1038 have revealed the presence of a complex system of hydrothermally originated fluids. Whereas the data in the reference site indicate recent hydrothermal activity in the basal part of the drill site, the evidence in Site 1038 suggests that fluids of hydrothermal origin spread out at shallow depths around the central hill, causing substantial sediment alteration as well as deposition of hydrothermal sulfides in the near surface zone of the sediments. A second major discovery at Site 1038 was the evidence for fluid phase separation at depth at temperatures possibly in excess of 400 °C. This conclusion is based on the presence of both low Cl and high Cl fluids. The latter appear to be advected rapidly towards the surface, presumably along cracks and faults. The low Cl fluids, however, appear to be transported laterally along sandy horizons in the sediments, thus signifying two very different migration pathways for high Cl and low Cl hydrothermally phase separated fluids. Studies of the organic geochemistry of dissolved gases and matured organic matter corroborate these findings of extensive hydrothermal alteration of the sediments.  相似文献   

10.
Cold springs upwelling through large serpentinite mud volcanoes in the outer half of the Mariana forearc provide a unique window into processes of devolatilization of the subducting Pacific Plate. We have sampled upwelling pore waters with lower chlorinity than seawater from six sites on five serpentinite mud volcanoes, by conventional gravity and piston coring, by push coring from the ROV Jason, by drilling on ODP Legs 125 and 195, and by manned submersible. The sites range from 13°47′N to 19°33′N and 52 to 90 km from the Mariana trench axis, corresponding to approximate depths to the top of the downgoing plate of 16 to 29 km. The composition of the springs varies systematically over this distance: nearer the trench the upwelling waters have much higher Ca and Sr than seawater and much lower carbonate alkalinity, sulfate, Na/Cl, K, Rb, and B. Farther from the trench the waters show the opposite trends relative to seawater. Chlorinity is consistently lower than in seawater and shows large variations that are not systematic with distance from the trench. Cs is consistently higher than in seawater and increases with distance from the trench. All of the waters have high pH and are heavily depleted in Mg, Si, Li, F, and 87Sr/86Sr relative to seawater. They tend to be enriched in O18/O16. Except for ODP drilling, none of the cores was long enough to produce an asymptotic compositional trend with depth. We have inferred the end-member compositions of the upwelling waters by extrapolation against Mg. At two sites we were able to compare data from gravity cores with data from drill cores or push cores collected at springs to estimate the effects of reactions that occur at shallow depth below the seafloor, on mixing of the upwelling waters with seawater. These effects are different for sites high in dissolved Ca, nearer the trench, vs. those high in alkalinity, farther from the trench. Common to both are large losses from solution of 1) Ca, as CaCO3 and in exchange for Na; 2) Mg, in exchange for Na or Ca and as brucite; 3) sulfate, probably reduced by microbes or possibly precipitated as gypsum; 4) Sr, Ba, Si, and F. Na is consistently leached from the solids into solution, whereas K and O18/O16 are relatively unreactive.We infer that the upwelling waters are uniformly saturated with CaCO3 and that the excess H2O and the trends in Ca, Sr, alkalinity, and sulfate with distance from the trench result from introduction of H2O and dissolved carbonate and sulfate from an external source, the sediment and altered basalt at the top of the subducting plate. The concurrent trends in Na/Cl, B, Cs, and especially K and Rb indicate that these species originate from the top of the subducting plate in response to increasing temperature. These systematic variations across the outer forearc imply that the solutions ascend more or less vertically from the source region and do not travel long distances laterally along the décollement before ascending. Based on leaching of K, the 150°C isotherm is crossed approximately beneath Big Blue Seamount at a depth of ∼22 km below the seafloor, 70 km behind the trench. By this point it appears that carbonate dissolution has joined dehydration as a significant process at the top of the subducting plate.  相似文献   

11.
李军  孙治雷  黄威  崔汝勇 《地球科学》2014,39(3):312-324
原始的海水成分、基岩的组分及结构、热源性质等因素决定着现代海底热液喷口系统的流体成分, 同时, 各种地质构造背景下的岩浆脱气作用也在不同程度上影响热液流体的组成.热液流体一旦喷出海底, 就能形成不同类型的热液沉积体, 包括高温流体形成的金属硫化物或硫酸盐烟囱体、热液丘以及由低温弥散流及非浮力羽流形成的含金属沉积物堆积体.高温烟囱体的形成受控于海水和热液的混合比例, 常常表现为典型的两阶段模式, 即先形成环状硬石膏表层, 然后在其内部发生富Cu硫化物的沉淀.这一模式在更大尺度上也可以观察到, 如TAG热液丘.含金属沉积物遍布海底, 除热液羽流外, 金属硫化物烟囱体在氧化环境中氧化蚀变的产物也是其重要来源.生物的活动贯穿于现代热液过程的始终, 并在烟囱体的形成、分解以及羽流的扩散沉淀过程中起到了重要作用.当前, 热液生物矿化机理、Lost City型热液场以及超慢速扩张洋脊的有关研究是海底这一系统研究的热点, 前两者研究能使人们更好地理解地球早期的演化和生命的起源, 而后者的考察和研究能进一步丰富海底热液成矿理论, 并有助于寻找更大规模的热液矿体.   相似文献   

12.
The Flores diving cruise was part of the MAST III-AMORES (1995-1998) program funded by the European Union. One of the major achievements of the Flores cruise was the discovery of the Rainbow hydrothermal field hosted in ultramafic rocks south of the Amar segment on the Mid-Atlantic ridge (MAR). The Rainbow hydrothermal fluids exhibit temperatures of 365 °C, pH of 2.8, high chlorinity (750 mmol/kg), and low silica (6.9 mmol/kg). The uniformity in endmember major, minor, trace element concentrations and gas contents suggests that all Rainbow fluids originate from the same deep source. Although H2S content is relatively low (1.20 mmol/kg), all vent fluids show extraordinary high H2 (16 mmol/kg), CH4 (2.5 mmol/kg) and CO (5 μmol/kg) endmember concentrations compared to fluids collected from other vent sites along the MAR. Hydrogen represents more than 40% of the total gas volume extracted from the fluids. At Rainbow, H2 production is likely associated with alteration of olivine and orthopyroxene minerals during serpentinization. Given that exposures of ultramafic rock may be common, particularly along slow-spreading ridges, the production of H2 may have important implications for microbial activity at and beneath the seafloor.  相似文献   

13.
Microchemical analyses of rare earth element (REE) concentrations and Sr and S isotope ratios of anhydrite are used to identify sub-seafloor processes governing the formation of hydrothermal fluids in the convergent margin Manus Basin, Papua New Guinea. Samples comprise drill-core vein anhydrite and seafloor massive anhydrite from the PACMANUS (Roman Ruins, Snowcap and Fenway) and SuSu Knolls (North Su) active hydrothermal fields. Chondrite-normalized REE patterns in anhydrite show remarkable heterogeneity on the scale of individual grains, different from the near uniform REEN patterns measured in anhydrite from mid-ocean ridge deposits. The REEN patterns in anhydrite are correlated with REE distributions measured in hydrothermal fluids venting at the seafloor at these vent fields and are interpreted to record episodes of hydrothermal fluid formation affected by magmatic volatile degassing. 87Sr/86Sr ratios vary dramatically within individual grains between that of contemporary seawater and that of endmember hydrothermal fluid. Anhydrite was precipitated from a highly variable mixture of the two. The intra-grain heterogeneity implies that anhydrite preserves periods of contrasting hydrothermal versus seawater dominant near-seafloor fluid circulation. Most sulfate δ34S values of anhydrite cluster around that of contemporary seawater, consistent with anhydrite precipitating from hydrothermal fluid mixed with locally entrained seawater. Sulfate δ34S isotope ratios in some anhydrites are, however, lighter than that of seawater, which are interpreted as recording a source of sulfate derived from magmatic SO2 degassed from underlying felsic magmas in the Manus Basin. The range of elemental and isotopic signatures observed in anhydrite records a range of sub-seafloor processes including high-temperature hydrothermal fluid circulation, varying extents of magmatic volatile degassing, seawater entrainment and fluid mixing. The chemical and isotopic heterogeneity recorded in anhydrite at the inter- and intra-grain scale captures the dynamics of hydrothermal fluid formation and sub-seafloor circulation that is highly variable both spatially and temporally on timescales over which hydrothermal deposits are formed. Microchemical analysis of hydrothermal minerals can provide information about the temporal history of submarine hydrothermal systems that are variable over time and cannot necessarily be inferred only from the study of vent fluids.  相似文献   

14.
The conventional model of leaching volcanic rocks as a source of metals in a seafloor hydrothermal systems has been tested by examining the behavior of Pb and other trace elements during hydrothermal alteration. ODP Leg 193 drill sites 1188 (Snowcap) and 1189 (Roman Ruins) on Pual Ridge in the eastern Manus Basin offshore eastern Papua New Guinea provide a unique three-dimensional window into an active back-arc hydrothermal system. We investigate by means of a LA-ICP-MS microbeam technique the capacity of Pb to be leached from a host volcanic rock exposed to various types and intensities of alteration. Our results are in general agreement with previous studies that utilized bulk analytical techniques but provide a more detailed explanation of the processes.Fresh representative dacitic lavas from the Pual Ridge have an average whole rock Pb content of 5.2 ppm, an average interstitial glass Pb content of 5.6 ppm and an average plagioclase Pb content of 1.0 ppm. Altered matrix samples have highly variable Pb values ranging from 0 to 52.4 ppm. High Pb values in altered samples are associated with a low temperature chlorite and clay mineral assemblage, in some cases overprinted by a high temperature (up to 350 °C) silica-rich “bleaching” alteration. Only the most highly altered matrix samples have REE patterns that differ from the fresh Pual Ridge dacite. This may represent either different lava histories or alteration characteristics that have affected normally immobile REEs. Altered samples with the highest Pb values have similar REE patterns to those of the local unaltered lavas. They are compositionally similar to typical Pual Ridge dacites indicating a genetic relationship between the main regional volcanic suite and the subseafloor hydrothermally altered, Pb-enriched material.Relative loss/gain for Pb between the analyzed altered samples and a calculated precursor show a maximum relative gain of 901%. Samples with relative Pb gain from both drill sites are associated with lower temperature alteration mineral assemblages characterized by pervasive chloritization. The related lower temperature (220-250 °C) neutral to slightly acidic fluids have been ascribed by others to return circulation of hydrothermal fluids that did not interact with seawater. Because altered samples have a higher Pb content than the fresh precursor, leaching of fresh volcanic rocks cannot be the source of Pb in the hydrothermal systems.  相似文献   

15.
Petrological, geochemical, and Nd isotopic analyses have been carried out on rock samples from the Rainbow vent field to assess the evolution of the hydrothermal system. The Rainbow vent field is an ultramafic-hosted hydrothermal system located on the Mid-Atlantic Ridge characterized by vigorous high-temperature venting (∼365°C) and unique chemical composition of fluids: high chlorinity, low pH and very high Fe, and rare earth element (REE) contents (Douville et al., Chemical Geology 184:37–48, 2002). Serpentinization has occurred under a low-temperature (<270°C) retrograde regime, later overprinted by a higher temperature sulfide mineralization event. Retrograde serpentinization reactions alone cannot reproduce the reported heat and specific chemical features of Rainbow hydrothermal fluids. The following units were identified within the deposit: (1) nonmineralized serpentinite, (2) mineralized serpentinite—stockwork, (3) steatite, (4) semimassive sulfides, and (5) massive sulfides, which include Cu-rich massive sulfides (up to 28wt% Cu) and Zn-rich massive sulfide chimneys (up to 5wt% Zn). Sulfide mineralization has produced significant changes in the sulfide-bearing rocks including enrichment in transition metals (Cu, Zn, Fe, and Co) and light REE, increase in the Co/Ni ratios comparable to those of mafic Cu-rich volcanic-hosted massive sulfide deposits and different 143Nd/144Nd isotope ratios. Vent fluid chemistry data are indicative of acidic, reducing, and high temperature conditions at the subseafloor reaction zone where fluids undergo phase separation most likely under subcritical conditions (boiling). An explanation for the high chlorinity is not straightforward unless mixing with high salinity brine or direct contribution from a magmatic Cl-rich aqueous fluid is considered. This study adds new data, which, combined with the current knowledge of the Rainbow vent field, brings compelling evidence for the presence, at depth, of a magmatic body, most likely gabbroic, which provides heat and metals to the system. Co/Ni ratios proved to be good tools used to discriminate between rock units, degree of sulfide mineralization, and positioning within the hydrothermal system. Deeper units have Co/Ni <1 and subsurface and surface units have Co/Ni >1.  相似文献   

16.
A geochemical investigation has been conducted of a suite of four sediment cores collected from directly beneath the hydrothermal plume at distances of 2 to 25 km from the Rainbow hydrothermal field. As well as a large biogenic component (>80% CaCO3) these sediments record clear enrichments of the elements Fe, Cu, Mn, V, P, and As from hydrothermal plume fallout but only minor detrital background material. Systematic variations in the abundances of “hydrothermal” elements are observed at increasing distance from the vent site, consistent with chemical evolution of the dispersing plume. Further, pronounced Ni and Cr enrichments at specific levels within each of the two cores collected from closest to the vent site are indicative of discrete episodes of additional input of ultrabasic material at these two near-field locations. Radiocarbon dating reveals mean Holocene accumulation rates for all four cores of 2.7 to 3.7 cm.kyr−1, with surface mixed layers 7 to 10+ cm thick, from which a history of deposition from the Rainbow hydrothermal plume can be deduced. Deposition from the plume supplies elements to the underlying sediments that are either directly hydrothermally sourced (e.g., Fe, Mn, Cu) or scavenged from seawater via the hydrothermal plume (e.g., V, P, As). Holocene fluxes into to the cores’ surface mixed layers are presented which, typically, are an order of magnitude greater than “background” authigenic fluxes from the open North Atlantic. One core, collected closest to the vent site, indicates that both the concentration and flux of hydrothermally derived material increased significantly at some point between 8 and 12 14C kyr ago; the preferred explanation is that this variation reflects the initiation/intensification of hydrothermal venting at the Rainbow hydrothermal field at this time—perhaps linked to some specific tectonic event in this fault-controlled hydrothermal setting.  相似文献   

17.
The circulation of hydrothermal fluid through the upper oceanic crustal reservoir has a large impact on the chemistry of seawater, yet the impact on dissolved organic carbon (DOC) in the ocean has received almost no attention. To determine whether hydrothermal circulation is a source or a sink for DOC in the oceans, we measured DOC concentrations in hydrothermal fluids from several environments. Hydrothermal fluids were collected from high-temperature vents and diffuse, low-temperature vents on the basalt-hosted Juan de Fuca Ridge axis and also from low-temperature vents on the sedimented eastern flanks. High-temperature fluids from Main Endeavour Field (MEF) and Axial Volcano (AV) contain very low DOC concentrations (average = 15 and 17 μM, respectively) compared to background seawater (36 μM). At MEF and AV, average DOC concentrations in diffuse fluids (47 and 48 μM, respectively) were elevated over background seawater, and high DOC is correlated with high microbial cell counts in diffuse fluids. Fluids from off-axis hydrothermal systems located on 3.5-Ma-old crust at Baby Bare Seamount and Ocean Drilling Program (ODP) Hole 1026B had average DOC concentrations of 11 and 13 μM, respectively, and lowered DOC was correlated with low cell counts. The relative importance of heterotrophic uptake, abiotic sorption to mineral surfaces, thermal decomposition, and microbial production in fixing the DOC concentration in vent fluids remains uncertain. We calculated the potential effect of hydrothermal circulation on the deep-sea DOC cycle using our concentration data and published water flux estimates. Maximum calculated fluxes of DOC are minor compared to most oceanic DOC source and sink terms.  相似文献   

18.
ODP drilling of the active TAG hydrothermal mound at 26°N on the Mid-Atlantic Ridge provided the first insights into the third dimension of a volcanic-hosted massive sulfide (VMS) deposit on a sediment-free mid-ocean ridge. Sulfide precipitation at this site started at least 20,000 years ago and resulted in the formation of a distinctly circular, 200-m diameter, 50-m-high pyritic mound and a silicified stockwork complex containing approximately 3.9 million tonnes of sulfide-bearing material with an average of 2.1 wt% Cu and 0.6 wt% Zn in 95 samples collected from 1–125 m below the seafloor. The periodic release of high-temperature hydrothermal fluids at the same location for several thousand years with intermittent periods of hydrothermal quiesence is the dominating process in the formation of the TAG hydrothermal mound. Distinct geochemical, mineralogical and isotopic zonation as well as a complex assemblage of sulfide-anhydrite-quartz bearing breccias can be related to this process. Geochemical depth profiles indicate extremely low base and trace element concentrations for the interior of the mound, which clearly contrasts with published analyses of samples collected from the surface of the TAG mound. This is explained by continued zone refining during which metals were mobilized from the interior of the mound by upwelling, hot (>350 °C) hydrothermal fluids. Mixing of these fluids with infiltrating ambient seawater subsequently caused redeposition of metals close to the mound-seawater interface. The sulfur isotopic composition of bulk sulfides (+4.4 to +8.2‰δ34S; average +6.5‰) is unusually heavy when compared to other sediment-free mid-ocean ridge deposits and implies the introduction of heavy seawater sulfur to the hydrothermal fluid. The slight increase in sulfur isotope ratios with depth and distinct variations between early, disseminated sulfides related to wallrock alteration, and massive as well as late vein sulfides indicates widespread entrainment of seawater deep into the system. Fluid inclusion measurements in quartz and anhydrite reveal high formation temperatures throughout the TAG mound (up to 390 °C) at one time with an overall increase in trapping temperatures with depth. Lower formation temperatures close to the paleo-seafloor indicate local entrainment of seawater into the mound. Formation temperatures for a central anhydrite-bearing zone range from 340–360 °C and are slightly lower than the exit temperature of hydrothermal fluids presently venting at the Black Smoker Complex (360–369 °C). Fluid inclusions in quartz and anhydrite from the stockwork zone are characterized by formation temperatures higher than 375 °C, indicating conductive cooling of the hydrothermal fluids or mixing with ambient seawater prior to venting. Formation temperatures for quartz from an area of extremely low heat flow at the western side of the mound reach up to 390 °C, implying that this area was once part of a high-temperature hydrothermal upflow zone. The low heat flow and the absence of anhydrite within this part of the mound are strong indications that the recent pulse of high-temperature hydrothermal activity is not affecting this area and provides evidence for significant changes in the fluid flow regime underneath the deposit between hydrothermal cycles. Received: 16 November 1998 / Accepted: 19 August 1999  相似文献   

19.
Based on the petrology of hydrothermally altered Archean basaltic greenstones, thermodynamic calculations of phase equilibria were conducted to estimate the composition of a high-temperature (∼350 °C) hydrothermal fluid in an Archean subseafloor basalt-hosted hydrothermal system. The results indicate that the hydrothermal fluid was highly alkaline attributed to the presence of calcite in the alteration minerals under a high-CO2 condition, and predict a generation of SiO2-rich, Fe-poor hydrothermal fluids in the Archean subseafloor hydrothermal system. The chemically reactive mixing zones between alkaline hydrothermal fluids and slightly acidic-neutral seawater are characterized by inverse pH and chemical polarity to modern hydrothermal systems, leading to extensive precipitation of silica and iron oxyhydroxides on/under the seafloor. Such processes can be responsible for the abiotic formation of voluminous chert and subseafloor silica dike, the mechanism of silicification, and the pH-controlled generation of banded iron formation that has been arising mainly from the redox chemistry in the Archean ocean. Such high-temperature alkaline fluids could have had a significant role not only in the early ocean geochemical processes but also in the early evolution of life.  相似文献   

20.
The discovery of ultramafic hosted hydrothermal systems at Rainbow (36°N MAR) and Lost City, a vent site approximately 15 km west of the MAR at 30°N, provides unique perspectives on chemical and heat-generating processes associated with serpentinization at a range of chemical and physical conditions. Heat balance calculations together with constraints imposed by geochemical modeling indicate that significant changes in temperature are not likely to occur at either vent system as a result of the exothermic nature of olivine hydrolysis. At Rainbow, the relatively high temperatures in subseafloor reaction zones (in excess of 400°C), which must be linked to magmatic processes, inhibit olivine hydrolysis, effectively precluding mineralization-induced heating effects. Geochemical modeling of the Lost City vent fluids indicates temperatures in excess of those measured (40-75°C). The relatively high subseafloor temperatures (∼ 200 ± 50°C) requires conductive cooling of the fluids on ascent to the seafloor—a scenario in keeping with the mineralization of chimney structures actually observed. Although the intermediate temperatures predicted for subseafloor reaction zones at Lost City could be expected to enhance olivine to serpentine conversion, dissolved Cl, K/Cl and Na/Cl ratios of the Lost City vent fluids are virtually unchanged from seawater values and indicate little hydration of olivine, which is a necessary condition for exothermic heat generation by serpentinization. Apparently the fluid/rock mass ratio is too high or fluid residence times too low for this to occur to any significant extent. Thus, in spite of the off-axis location of the Lost City vents and apparent lack of a localized heat source, mineralization reactions likely play an insignificant role in accounting for hydrothermal circulation. It is more likely that tectonic processes associated with the slow spreading MAR, permit access of seawater to relatively deep and still hot lithospheric units and/or near axis magmatic heat sources, before venting. Additional chemical and physical (temperature, flow rate) data for Lost City and similar hydrothermal systems are needed to test key elements of the proposed model.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号