首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The kinetics of transmetallation of Gd3+ in diethylenetriaminpentaacetic acid (Gd-DTPA) by rare earth elements (except Yb), Y3+ and Cu2+ has been studied in test solutions ranging from pH 5 to 6.5 in order to understand the distribution and longevity of their chelates in the hydrosphere. Chelated and non-chelated species were separated by adsorption of the free ions by clay minerals before analysis by ICP-MS. This simple method allows determining the distribution of DTPA chelates at concentration levels as low as a few 10 pmol/l. The transmetallation constants at ionic strength of 0.01 mol/l and room temperature are commensurable with those derived from published formation constants of the corresponding DTPA complexes. It could be proved that DTPA chelates of rare earth elements, Y and Cu are stable at least over 6 months. The pattern of the second-order rate constants shows a strong tetrad effect, which is not displayed by the pattern of transmetallation constants. Based on these results, the rate of transmetallation of Gd-DTPA under natural conditions is derived. The resultant process yields 10% turn-over of initial Gd-DTPA within two months, if Cu2+ concentrations are below 1 nmol/l. At higher concentrations, the turn-over increases with elapsed time. Equilibrium among REE and Y is expected only after tens of years. This makes Gd-DTPA a powerful tracer in hydrological studies.  相似文献   

2.
The behavior of Gd-DTPA during bank filtration was simulated in a 30 m column filled with Pleistocene sand and flushed by surface water from a lakeside in Berlin, Germany. The surface water is about a 1:1 mixture of river water and effluents from a sewage treatment plant. Throughout 34 days this water was continuously spiked with Gd-DTPA at a level of 60 μg/L. The broad plateau of the Gd-DTPA pulse declined by 15.4% within 34 days by transmetallation. Nine percentage of the total decline is caused by Y and rare earth elements; the remaining part is attributed to Cu2+ which is the most influential metal in surface water. All other metals also contributing to transmetallation are combined with Cu to Cu equivalents because only the rate constant of transmetallation of Cu2+ is known. The analytical results of the column effluents prove the pseudo-first-order kinetics of transmetallation based on reversible sorption of metals by pools in the column sediment and disprove biodegradation at noticeable levels. The mass ratio of water to tracer is <1010.  相似文献   

3.
Copper isotopes may prove to be a useful tool for investigating bacteria-metal interactions recorded in natural waters, soils, and rocks. However, experimental data which attempt to constrain Cu isotope fractionation in biologic systems are limited and unclear. In this study, we utilized Cu isotopes (δ65Cu) to investigate Cu-bacteria interactions, including surface adsorption and intracellular incorporation. Experiments were conducted with individual representative species of Gram-positive (Bacillus subtilis) and Gram-negative (Escherichia coli) bacteria, as well as with wild-type consortia of microorganisms from several natural environments. Ph-dependent adsorption experiments were conducted with live and dead cells over the pH range 2.5-6. Surface adsorption experiments of Cu onto live bacterial cells resulted in apparent separation factors (Δ65Cusolution-solid = δ65Cusolution − δ65Cusolid) ranging from +0.3‰ to +1.4‰ for B. subtilis and +0.2‰ to +2.6‰ for E. coli. However, because heat-killed bacterial cells did not exhibit this behavior, the preference of the lighter Cu isotope by the cells is probably not related to reversible surface adsorption, but instead is a metabolically-driven phenomenon. Adsorption experiments with heat-killed cells yielded apparent separation factors ranging from +0.3‰ to −0.69‰ which likely reflects fractionation from complexation with organic acid surface functional group sites. For intracellular incorporation experiments the lab strains and natural consortia preferentially incorporated the lighter Cu isotope with an apparent Δ65Cusolution-solid ranging from ∼+1.0‰ to +4.4‰. Our results indicate that live bacterial cells preferentially sequester the lighter Cu isotope regardless of the experimental conditions. The fractionation mechanisms involved are likely related to active cellular transport and regulation, including the reduction of Cu(II) to Cu(I). Because similar intracellular Cu machinery is shared by fungi, plants, and higher organisms, the influence of biological processes on the δ65Cu of natural waters and soils is probably considerable.  相似文献   

4.
Copper isotope fractionation in acid mine drainage   总被引：4，自引：0，他引：4  
We measured the Cu isotopic composition of primary minerals and stream water affected by acid mine drainage in a mineralized watershed (Colorado, USA). The δ65Cu values (based on 65Cu/63Cu) of enargite (δ65Cu = −0.01 ± 0.10‰; 2σ) and chalcopyrite (δ65Cu = 0.16 ± 0.10‰) are within the range of reported values for terrestrial primary Cu sulfides (−1‰ < δ65Cu < 1‰). These mineral samples show lower δ65Cu values than stream waters (1.38‰ ? δ65Cu ? 1.69‰). The average isotopic fractionation (Δaq-min = δ65Cuaq − δ65Cumin, where the latter is measured on mineral samples from the field system), equals 1.43 ± 0.14‰ and 1.60 ± 0.14‰ for chalcopyrite and enargite, respectively. To interpret this field survey, we leached chalcopyrite and enargite in batch experiments and found that, as in the field, the leachate is enriched in 65Cu relative to chalcopyrite (1.37 ± 0.14‰) and enargite (0.98 ± 0.14‰) when microorganisms are absent. Leaching of minerals in the presence of Acidithiobacillus ferrooxidans results in smaller average fractionation in the opposite direction for chalcopyrite (Δaq-mino=-0.57±0.14‰, where mino refers to the starting mineral) and no apparent fractionation for enargite (Δaq-mino=0.14±0.14‰). Abiotic fractionation is attributed to preferential oxidation of 65Cu+ at the interface of the isotopically homogeneous mineral and the surface oxidized layer, followed by solubilization. When microorganisms are present, the abiotic fractionation is most likely not seen due to preferential association of 65Cuaq with A. ferrooxidans cells and related precipitates. In the biotic experiments, Cu was observed under TEM to occur in precipitates around bacteria and in intracellular polyphosphate granules. Thus, the values of δ65Cu in the field and laboratory systems are presumably determined by the balance of Cu released abiotically and Cu that interacts with cells and related precipitates. Such isotopic signatures resulting from Cu sulfide dissolution should be useful for acid mine drainage remediation and ore prospecting purposes.  相似文献   

5.
We examined the copper isotope ratio of primary high temperature Cu-sulfides, secondary low temperature Cu-sulfides (and Cu-oxides) as well as Fe-oxides in the leach cap, which represent the weathered remains of a spectrum of Cu mineralization, from nine porphyry copper deposits. Copper isotope ratios are reported as δ65Cu‰ = ((65Cu/63Cusample/65Cu/63CuNIST 976 standard) − 1) ? 103. Errors for all the analyses are ± 0.14‰ (determined by multiple analyses of the samples) and mass bias was corrected through standard-sample-standard bracketing. The overall isotopic variability measured in these samples range from − 16.96‰ to 9.98‰.  相似文献   

6.
The isotopic compositions of Sm and Gd in lunar regolith samples from the Apollo 16 and 17 deep drill stems showed clear isotopic shifts in 150Sm /149Sm (ε = +124 to +191 for A-16, and +37 to +111 for A-17) and 158Gd/157Gd (ε = +107 to +169 for A-16, and +31 to +84 for A-17) corresponding to neutron fluences of (5.68-9.03) × 1016 n cm−2 for A-16 and (1.85-5.04) × 1016 n cm−2 for A-17. The depth profiles of neutron fluences suggest that the regoliths at both sites were due to incomplete mixing of three different slabs which experienced individual two-stage irradiation before and after deposition of the upper slabs. The variations in REE compositions provide chemical evidence for incompletely vertical mixing of regoliths especially at upper layers of the two sites. The thermal neutron energy index estimated from the combination of Sm and Gd isotopic shifts, defined as εSm/εGd, shows a small variation (0.61-0.64) in the A-16 core except for the surface layer. On the other hand, a large variation in εSm/εGd = 0.67 to 0.83 in the A-17 core may result from complicated history such as two-stage irradiation and incomplete mixing during the gardening processes. Isotopic enrichments of 152Gd and 154Gd correlated with Eu/Gd elemental abundances and neutron fluences were also observed in almost all of 15 samples, showing evidence of neutron-capture from 151Eu and 153Eu, respectively.  相似文献   

7.
We report high precision Cu isotope data coupled with Cu concentration measurements for metal, troilite and silicate fractions separated from magmatic and non-magmatic iron meteorites, analysed for Fe isotopes (δ57Fe; permil deviation in 57Fe/54Fe relative to the pure iron standard IRMM-014) in an earlier study (Williams et al., 2006). The Cu isotope compositions (δ65Cu; permil deviation in 65Cu/63Cu relative to the pure copper standard NIST 976) of both metals (δ65CuM) and sulphides (δ65CuFeS) span much wider ranges (−9.30 to 0.99‰ and −8.90 to 0.63‰, respectively) than reported previously. Metal-troilite fractionation factors (Δ65CuM-FeS = δ65CuM − δ65CuFeS) are variable, ranging from −0.07 to 5.28‰, and cannot be explained by equilibrium stable isotope fractionation coupled with either mixing or reservoir effects, i.e. differences in the relative proportions of metal and sulphide in the meteorites. Strong negative correlations exist between troilite Cu and Fe (δ57FeFeS) isotope compositions and between metal-troilite Cu and Fe (Δ57FeM-FeS) isotope fractionation factors, for both magmatic and non-magmatic irons, which suggests that similar processes control isotopic variations in both systems. Clear linear arrays between δ65CuFeS and δ57FeFeS and calculated Cu metal-sulphide partition coefficients (DCu = [Cu]metal/[Cu]FeS) are also present. A strong negative correlation exists between Δ57FeM-FeS and DCu; a more diffuse positive array is defined by Δ65CuM-FeS and DCu. The value of DCu can be used to approximate the degree of Cu concentration equilibrium as experimental studies constrain the range of DCu between Fe metal and FeS at equilibrium to be in the range of 0.05-0.2; DCu values for the magmatic and non-magmatic irons studied here range from 0.34 to 1.11 and from 0.04 to 0.87, respectively. The irons with low DCu values (closer to Cu concentration equilibrium) display the largest Δ57FeM-FeS and the lowest Δ65CuM-FeS values, whereas the converse is observed in the irons with large values DCu that deviate most from Cu concentration equilibrium. The magnitudes of Cu and Fe isotope fractionation between metal and FeS in the most equilibrated samples are similar: 0.25 and 0.32‰/amu, respectively. As proposed in an earlier study (Williams et al., 2006) the range in Δ57FeM-FeS values can be explained by incomplete Fe isotope equilibrium between metal and sulphide during cooling, where the most rapidly-cooled samples are furthest from isotopic equilibrium and display the smallest Δ57FeM-FeS and largest DCu values. The range in Δ65CuM-FeS, however, reflects the combined effects of partial isotopic equilibrium overprinting an initial kinetic signature produced by the diffusion of Cu from metal into exsolving sulphides and the faster diffusion of the lighter isotope. In this scenario, newly-exsolved sulphides initially have low Cu contents (i.e. high DCu) and extremely light δ65CuFeS values; with progressive equilibrium and fractional crystallisation the Cu contents of the sulphides increase as their isotopic composition becomes less extreme and closer to the metal value. The correlation between Δ65CuM-FeS and Δ57FeM-FeS is therefore a product of the superimposed effects of kinetic fractionation of Cu and incomplete equilibrium between metal and sulphide for both isotope systems during cooling. The correlations between Δ65CuM-FeS and Δ57FeM-FeS are defined by both magmatic and non-magmatic irons record fractional crystallisation and cooling of metallic melts on their respective parent bodies as sulphur and chalcophile elements become excluded from crystallised solid iron and concentrated in the residual melt. Fractional crystallisation processes at shallow levels have been implicated in the two main classes of models for the origin of the non-magmatic iron meteorites; at (i) shallow levels in impact melt models and (ii) at much deeper levels in models where the non-magmatic irons represent metallic melts that crystallised within the interior of a disrupted and re-aggregated parent body. The presence of non-magmatic irons with a range of Fe and Cu isotope compositions, some of which record near-complete isotopic equilibrium implies crystallisation at a range of cooling rates and depths, which is most consistent with cooling within the interior of a meteorite parent body. Our data therefore lend support to models where the non-magmatic irons are metallic melts that crystallised in the interior of re-aggregated, partially differentiated parent bodies.  相似文献   

8.
Jarosite is an important mineral on Earth, and possibly on Mars, where it controls the mobility of iron, sulfate and potentially toxic metals. Atomistic simulations have been used to study the incorporation of Al3+, and the M2+ impurities Cd, Cu and Zn, in the (0 1 2) and (0 0 1) surfaces of jarosite. The calculations show that the incorporation of Al on an Fe site is favorable on all surfaces in which terminal Fe ions are exposed, and especially on the (0 0 1) [Fe3(OH)3]6+ surface. Incorporation of Cd, Cu or Zn on a K site balanced by a K vacancy is predicted to stabilize the surfaces, but calculated endothermic solution energies and the high degree of distortion of the surfaces following incorporation suggest that these substitutions will be limited. The calculations also suggest that incorporation of Cd, Cu and Zn on an Fe site balanced by an OH vacancy, or by coupled substitution on both K and Fe sites, is unfavorable, although this might be compensated for by growth of a new layer of jarosite or goethite, as predicted for bulk jarosite. The results of the simulations show that surface structure will exert an influence on uptake of impurities in the order Cu > Cd > Zn, with the most favorable surfaces for incorporation being (0 1 2) [KFe(OH)4]0 and (0 0 1) [Fe3(OH)3]6+.  相似文献   

9.
This paper presents the results of extensive field trials measuring rates of Fe(II) oxidation at a number of Fe-bearing mine drainage discharges in the UK. Batch experiments were carried out with samples taken at regular intervals and Fe(II) concentration determined spectrophotometrically using 2′2-bipyridyl as the complexing agent. Initial concentrations for Fe(II) were 5.65-76.5 mg/L. Temperature, pH and dissolved O2 (DO) were logged every 10 s, with pH at the start of the experiments in the range 5.64-6.95 and alkalinity ranging from 73 to 741 mg/L CaCO3 equivalent. A numerical model based on a fourth order Runge-Kutta method was developed to calculate values for k1, the rate constant for homogeneous oxidation, from the experimental data. The measured values of pH, temperature, [Fe(II)] and DO were input into the model with resulting values for k1 found to be in the range 2.7 × 1014-2.7 × 1016 M−2 atm−1 min−1. These values for k1 are 1-3 orders of magnitude higher than previously reported for laboratory studies at a similar pH. Comparison of the observed Fe(II) oxidation rates to data published by other authors show a good correlation with heterogenous oxidation rates and may indicate the importance of autocatalysis in these systems. These higher than expected rates of Fe oxidation could have a significant impact on the design of treatment schemes for the remediation of mine drainage and other Fe-bearing ground waters in the future.  相似文献   

10.
The interaction of Cs(I), Eu(III), Th(IV) and U(VI) with montmorillonite colloids was investigated in natural Grimsel Test Site groundwater over a 3 years period. The asymmetric flow field-flow fractionation combined with various detectors was applied to study size variations of colloids and to monitor colloid association of trace metals. The colloids suspended directly in the low ionic strength (I), slightly alkaline granitic groundwater (I = 10−3 mol/L, pH 9.6) showed a gradual agglomeration with a size distribution shift from initially 10-200 nm to 50-400 nm within over 3 years. The Ca2+ concentration of 2.1 × 10−4 mol/L in the ground water is believed to be responsible for the slow agglomeration due to Ca2+ ion exchange against Li+ and Na+ at the permanently charged basal clay planes. Furthermore, the Ca2+ concentration lies close to the critical coagulation concentration (CCC) of 10−3 mol L−1 for clay colloids. Slow destabilization may delimit clay colloid migration in this specific groundwater over long time scales. Eu(III) and Th(IV) are found predominantly bound to clay colloids, while U(VI) prevails as the UO2(OH)3− complex and Cs(I) remains mainly as aquo ion under our experimental conditions. Speciation calculations qualitatively represent the experimental data. A focus was set on the reversibility of metal ion-colloid binding. Addition of humic acid as a competing ligand induces rapid metal ion dissociation from clay colloids in the case of Eu(III) even after previous aging for about 3 years. Interestingly only partial dissociation occurs in the case of Th(IV). Experiments and calculations prove that the humate complexes dominate the speciation of all metal ions under given conditions. The partial irreversibility of clay bound Th(IV) is presently not understood but might play an important role for the colloid-mediated transport of polyvalent actinides over wide distances in natural groundwater.  相似文献   

11.
At a test site consisting of a storage pond and connected artificial aquifer, the long-time behaviour of gadopentetic acid (Gd-DTPA) was compared with the classic tracer bromide (Br?C) in a 70-day dual-tracer experiment. The mixed tracer solution was injected into the oligotrophic pond, which is separated from the aquifer by an infiltration bank. The water drained from the aquifer was returned to the pond together with additional fresh groundwater, causing reduced concentrations of Gd-DTPA and Br?C in the system. Transmetallation of Gd-DTPA by rare earth elements and yttrium was negligible but Cu2+ and Ni2+ might have played a role. Adsorption and/or biodegradation of Gd-DTPA were negligible. The decline of Gd-DTPA/Br ratios by 18% in the pond over 68 days was caused by reversible sorption of Br?C in the aquifer, which caused variation of Br?C background. Thus, Br?C behaves less conservatively than Gd-DTPA in the aquifer. Comparison of both proves the suitability of Gd-chelates as tracers in hydrological studies. The advantage of Gd-DTPA as a tracer is that natural Gd3+ in water can continuously be monitored by analysing the suite of naturally occurring rare-earth elements. Thus, stable organic Gd-chelates are determinable with high precision at very low concentrations.  相似文献   

12.
Nitrogen contents and isotope compositions together with major and trace element concentrations were determined in a sequence of metagabbros from the western Alps (Europe) in order to constrain the evolution and behavior of N during hydrothermal alteration on the seafloor and progressive dehydration during subduction in a cold slab environment (8 °C/km). The rocks investigated include: (i) low-strain metagabbros that equilibrated under greenschist to amphibolite facies (Chenaillet Massif), blueschist facies (Queyras region) and eclogite facies (Monviso massif) conditions and (ii) highly-strained mylonites and associated eclogitic veins from the Monviso Massif. In all samples, nitrogen (2.6-55 ppm) occurs as bound ammonium () substituting for K or Na-Ca in minerals. Cu concentrations show a large variation, from 73.2 to 6.4 ppm, and are used as an index of hydrothermal alteration on the seafloor because of Cu fluid-mobility at relatively high temperature (>300 °C). In low-strain metagabbros, δ15N values of +0.8‰ to +8.1‰ are negatively correlated with Cu concentrations. Eclogitic mylonites and veins display Cu concentrations lower than 11 ppm and show a δ15N-Cu relationship that does not match the δ15N-Cu correlation found in low-strain rocks. This δ15N-Cu correlation preserved in low-strain rocks is best interpreted by leaching of Cu-N compounds, possibly of the form Cu(NH3)22+, during hydrothermal alteration. Recognition that the different types of low-strain metagabbros show the same δ15N-Cu correlation indicates that fluid release during subduction zone metamorphism did not modify the original N and Cu contents of the parent hydrothermally-altered metagabbros. In contrast, the low Cu content present in eclogitic veins and mylonites implies that ductile deformation and veining were accompanied either by a loss of copper or that externally-derived nitrogen was added to the system.We estimate the global annual flux of N subducted by metagabbros as 4.2 (±2.0) × 1011 g/yr. This value is about half that of sedimentary rocks, which suggests that gabbros carry a significant portion of the subducted nitrogen. The net budget between subducted N and that outgassed at volcanic arcs indicates that ∼80% of the subducted N is not recycled to the surface. On a global scale, the total amount of N buried to the mantle via subduction zones is estimated to be three times higher than that released from the mantle via mid-ocean ridges, arc and intraplate volcanoes and back-arc basins. This implies that N contained in Earth surface reservoirs, mainly in the atmosphere, is progressively transferred and sequestered into the mantle, with a net flux of ∼9.6 × 1011 g/yr. Assuming a constant flux of subducted N over the Earth’s history indicates that an amount equivalent to the present atmospheric N may have been sequestered into the silicate Earth over a period of 4 billion years.  相似文献   

13.
The Pitzer’s interaction parameters, λN–M, involving the Mth cationic Al species Al3+ or AlOH2+ or AlO+ and the Nth neutral species SiO2(aq) (at temperatures of 25–300 °C) or CO2(aq) (at temperatures of 25–150 °C), have been evaluated through empirical linear relationships between λN–M and the surface electrostatic field of the ionic species of interest. These relationships have been obtained starting from the known λN–M for both SiO2(aq) and CO2(aq) with the main dissolved cations. The Pitzer’s interaction parameter thus estimated for the pair CO2(aq)–Al3+ at 25 °C, 0.327, is 20–40% higher than the corresponding values obtained from CO2 solubilities in concentrated solutions of AlCl3, 0.272 ± 0.010 (2σ), and Al2(SO4)3, 0.232 ± 0.002 (2σ), partly corroborating the empirical approach adopted in this study. To test the Pitzer’s interaction coefficients for cationic Al species with aqueous SiO2, the log K values of the kaolinite dissolution reaction have been computed starting from available experimental data at 23–25 °C and ionic strengths of 0.0001–0.12 mol/kg adopting, alternatively, the Pitzer’s equations and the Debye–Hückel equation. A satisfactory agreement has been found between the log K values obtained through these two approaches, with maximum deviations of 0.11–0.12 log units. This good convergence of results is encouraging as it represents a necessary condition to prove the reliability of the Pitzer’s interaction coefficients estimated in this work. These results are a first step to take into account specific interactions among solutes in concentrated electrolyte solutions, such as those hosted in sedimentary basins or geothermal waters, for instance through the Pitzer’s equations. However, experimental or field data at higher ionic strengths are absolutely necessary to validate the reliability of the Pitzer’s interaction coefficients determined in this study.  相似文献   

14.
The leaching kinetics of chalcopyrite (CuFeS2) concentrate in sulfuric acid leach media with and without the initial addition of Fe3+ under carefully controlled solution conditions (Eh 750 mV SHE, pH 1) at various temperatures from 55 to 85 °C were measured. Kinetic analyses by (i) apparent rate (not surface area normalised), and rate dependence using (ii) a shrinking core model and (iii) a shrinking core model in conjunction with Fe3+ activity, were performed to estimate the activation energies (Ea) for Cu and Fe dissolution.The Ea values determined for Cu and Fe leaching in the absence of added Fe3+ are within experimental error, 80 ± 10 kJ mol−1 and 84 ± 10 kJ mol−1, respectively (type iii analyses Ea are quoted unless stated otherwise), and are indicative of a chemical reaction controlled process. On addition of Fe3+ the initial Cu leach rate (up to 10 h) was increased and Cu was released to solution preferentially over Fe, with the Ea value of 21 ± 5 kJ mol−1 (type ii analysis) suggestive of a transport controlled rate determining process. However, the rate of leaching rapidly decreased until it was consistently slower than for the equivalent leaches where Fe3+ was not added. The resulting Ea value for this leach regime of 83 ± 10 kJ mol−1 is within experimental error of that determined in the absence of added Fe3+. In contrast to Cu release, Fe release to solution was consistent with a chemical reaction controlled leach rate throughout. The Fe release Ea of 76 ± 10 kJ mol−1 is also within experimental error of that determined in the absence of added Fe3+. Where type (ii) and (iii) analyses were both successfully carried out (in all cases except for Cu leaching with added Fe3+, <10 h) the Ea derived are within experimental error. However, the type (iii) analyses of the leaches in the presence of added Fe3+ (>10 h), as compared to in the absence of added Fe3+, returned a considerably smaller pre-exponential factors for both Cu and Fe leach analyses commensurate with the considerably slower leach rate, suggestive of a more applicable kinetic analysis.XPS examination of leached chalcopyrite showed that the surface concentration of polysulfide and sulfate was significantly increased when Fe3+ was added to the leach liquor. Complementary SEM analysis revealed the surface features of chalcopyrite, most likely due to the nature of the polysulfide formed, are subtly different with greater surface roughness upon leaching in the absence of added Fe3+ as compared to a continuous smooth surface layer formed in the presence of added Fe3+. These observations suggest that the effect of Fe3+ addition on the rate of leaching is not due to the change in the chemical reaction controlled mechanism but due to a change in the available surface area for reaction.  相似文献   

15.
  相似文献   

16.
Rates of anaerobic respiration are of central importance for the long-term burial of carbon (C) in peatlands, which are a relevant sink in the global C cycle. To identify constraints on anaerobic peat decomposition, we determined detailed concentration depth profiles of decomposition end-products, i.e. methane (CH4) and dissolved inorganic carbon (DIC), along with concentrations of relevant decomposition intermediates at an ombrotrophic Canadian peat bog. The magnitude of in situ net production rates of DIC and CH4 was estimated by inverse pore-water modeling. Vertical transport in the peat was slow and dominated by diffusion leading to the buildup of DIC and CH4 with depth (5500 μmol L−1 DIC, 500 μmol L−1 CH4). Highest DIC and CH4 production rates occurred close to the water table (decomposition constant kd ∼ 10−3-10−4 a−1) or in some distinct zones at depth (kd ∼ 10−4 a−1). Deeper into the peat, decomposition proceeded very slowly at about kd = 10−7 a−1. This pattern could be related to thermodynamic and transport constraints. The accumulation of metabolic end-products diminished in situ energy yields of acetoclastic methanogenesis to the threshold for microbially mediated processes (−20 to −25 kJ mol−1 CH4). The methanogenic precursor acetate also accumulated (150 μmol L−1). In line with these findings, CH4 was formed by hydrogenotrophic methanogenesis at Gibbs free energies of −35 to −40 kJ mol−1 CH4. This was indicated by an isotopic fractionation αCO2-CH4 of 1.069-1.079. Fermentative degradation of acetate, propionate and butyrate attained Gibbs free energies close to 0 kJ mol−1 substrate. Although methanogenesis was apparently limited by some other factor in some peat layers, transport and thermodynamic constraints likely impeded respiratory processes in the deeper peat. Constraints on the removal of DIC and CH4 may thus slow decomposition and contribute to the sustained burial of C in northern peatlands.  相似文献   

17.
To study the geological control on groundwater As concentrations in Red River delta, depth-specific groundwater sampling and geophysical logging in 11 monitoring wells was conducted along a 45 km transect across the southern and central part of the delta, and the literature on the Red River delta’s Quaternary geological development was reviewed. The water samples (n = 30) were analyzed for As, major ions, Fe2+, H2S, NH4, CH4, δ18O and δD, and the geophysical log suite included natural gamma-ray, formation and fluid electrical conductivity. The SW part of the transect intersects deposits of grey estuarine clays and deltaic sands in a 15–20 km wide and 50–60 m deep Holocene incised valley. The NE part of the transect consists of 60–120 m of Pleistocene yellowish alluvial deposits underneath 10–30 m of estuarine clay overlain by a 10–20 m veneer of Holocene sediments. The distribution of δ18O-values (range −12.2‰ to −6.3‰) and hydraulic head in the sample wells indicate that the estuarine clay units divide the flow system into an upper Holocene aquifer and a lower Pleistocene aquifer. The groundwater samples were all anoxic, and contained Fe2+ (0.03–2.0 mM), Mn (0.7–320 μM), SO4 (<2.1 μM–0.75 mM), H2S (<0.1–7.0 μM), NH4 (0.03–4.4 mM), and CH4 (0.08–14.5 mM). Generally, higher concentrations of NH4 and CH4 and low concentrations of SO4 were found in the SW part of the transect, dominated by Holocene deposits, while the opposite was the case for the NE part of the transect. The distribution of the groundwater As concentration (<0.013–11.7 μM; median 0.12 μM (9 μg/L)) is related to the distribution of NH4, CH4 and SO4. Low concentrations of As (?0.32 μM) were found in the Pleistocene aquifer, while the highest As concentrations were found in the Holocene aquifer. PHREEQC-2 speciation calculations indicated that Fe2+ and H2S concentrations are controlled by equilibrium for disordered mackinawite and precipitation of siderite. An elevated groundwater salinity (Cl range 0.19–65.1 mM) was observed in both aquifers, and dominated in the deep aquifer. A negative correlation between aqueous As and an estimate of reduced SO4 was observed, indicating that Fe sulphide precipitation poses a secondary control on the groundwater As concentration.  相似文献   

18.
Copper Adsorption by Chernozem Soils and Parent Rocks in Southern Russia   总被引：1，自引：0，他引：1  
Laboratory data in Cu2+ adsorption by chernozems and parent rocks in Rostov region show that adsorption isotherms can be approximated by the Langmuir equation, whose parameters (Kl and C∞) were calculated for all of the samples. The values of C∞ show a strong negative correlation with the values of cationexchange capacity (CEC) (r =–0.88 at Р = 0.95), and Kl is correlated with the content of physical clay (particles <0.01 mm) (r = 0.78) and with clay (particles <0.001 mm) content in ordinary chernozem and southern chernozems of various particle size distribution (r = 0.80). Even stronger correlations were detected between these parameters in southern chernozems (r = 0.89 for the physical clay (PC) and r = 0.91 for the silt). However, none of the samples displays a significant correlation of C∞ and Kl with the contents of physical clay and silt. This led us to conclude that the composition of the samples, for example, their organic matter, can affect Cu2+ adsorption by the soils and parent rocks. Acidification mechanisms of the equilibrium solutions during the Cu2+ adsorption by soils are discussed, as also are the reasons for the absence of balance between Cu2+ adsorbed by soils and exchangeable cations transferred into solution. Analysis of the fine structures of the XANES and EXAFS spectra suggests that Cu2+ can form coordinated chelate complex compounds with humic acids (HA) of soils and can substitute Al3+ at octahedral sites when interacting with clay minerals in soils.  相似文献   

19.
We measured the adsorption of Cu(II) onto kaolinite from pH 3-7 at constant ionic strength. EXAFS spectra show that Cu(II) adsorbs as (CuO4Hn)n−6 and binuclear (Cu2O6Hn)n−8 inner-sphere complexes on variable-charge ≡AlOH sites and as Cu2+ on ion exchangeable ≡X--H+ sites. Sorption isotherms and EXAFS spectra show that surface precipitates have not formed at least up to pH 6.5. Inner-sphere complexes are bound to the kaolinite surface by corner-sharing with two or three edge-sharing Al(O,OH)6 polyhedra. Our interpretation of the EXAFS data are supported by ab initio (density functional theory) geometries of analog clusters simulating Cu complexes on the {110} and {010} crystal edges and at the ditrigonal cavity sites on the {001}. Having identified the bidentate (≡AlOH)2Cu(OH)20, tridentate (≡Al3O(OH)2)Cu2(OH)30 and ≡X--Cu2+ surface complexes, the experimental copper(II) adsorption data can be fit to the reactions
  相似文献   

20.
Cation partitioning and speciation in an aqueous soil suspension may depend on the coupling of reaction time, sorbate amount and mineral weathering reactions. These factors were varied in sediment suspension experiments to identify geochemical processes that affect migration of Sr2+ and Cs+ introduced to the subsurface by caustic high level radioactive waste (HLRW). Three glacio-fluvial and lacustrine sediments from the Hanford Site (WA, USA) were subjected to hyperalkaline (pH > 13), Na-Al-NO3-OH solution conditions within a gradient field of (i) sorptive concentration (10−5-10−3 m) and (ii) reaction time (0-365 d). Strontium uptake (qSr) exceeded that of cesium at nearly all reaction times. Sorbent affinity for both Cs+ and Sr2+ increased with clay plus silt content at early times, but a prolonged slow uptake process was observed over the course of sediment weathering that erased the texture effect for Sr2+; all sediments showed similar mass normalized uptake after several months of reaction time. Strontium became progressively recalcitrant to desorption after 92 d, with accumulation and aging of neoformed aluminosilicates. Formation of Cs+ and Sr2+-containing cancrinite and sodalite was observed after 183 d by SEM and synchrotron μ-XRF and μ-XRD. EXAFS data for qSr ≈ 40 mmol kg−1 showed incorporation of Sr2+ into both feldspathoid and SrCO3(s) coordination environments after one year. Adsorption was predominant at early times and low sorbate amount, whereas precipitation, controlled largely by sediment Si release, became increasingly important at longer times and higher sorbate amount. Kinetics of contaminant desorption at pH 8 from one year-weathered sediments showed significant dependence on background cation (Ca2+ versus K+) composition. Results of this study indicate that co-precipitation and ion exchange in neoformed aluminosilicates may be an important mechanism controlling Sr2+ and Cs+ mobility in siliceous sediments impacted by hyperalkaline HLRW.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号