首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
在分析LiDAR点云数据分类现状的基础上,针对植被与建筑物重叠区域分类困难的问题,提出了一种基于面向对象的点云分类方法.首先采用三角网渐进内插的滤波方法将点云分为地面点和非地面点,并得到DTM;然后对高出DTM一定高度的非地面点建立三角网,删除较长的三角网的边(地物间的边),从而将非地面点云分割成多个对象;再利用各个对象内的三角网坡度信息熵大小判断该对象属于植被或建筑物;最后对于难以区分的对象(植被与建筑物重叠区)根据建筑物几何规则形状延伸扩充,从而提高植被和建筑物重叠区的点云分类准确率.实验结果表明,该方法能够很好地区分建筑物和植被点,分类准确率达到87％.  相似文献   

2.
The creation of a quality Digital Terrain Model (DTM) is essential for representing and analyzing the Earth in a digital form. The continuous improvements in the acquisition and the potential of airborne Light Detection and Ranging (LiDAR) data are increasing the range of applications of this technique to the study of the Earth surface. The aim of this study was to determine the optimal parameters for calculating a DTM by using an iterative algorithm to select minimum elevations from LiDAR data in a steep mountain area with shrub vegetation. The parameters were: input data type, analysis window size, and height thresholds. The effects of slope, point density, and vegetation on DTM accuracy were also analyzed. The results showed that the lowest root mean square error (RMSE) was obtained with an analysis window size of 10 m, 5 m, and 2.5 m, rasterized data as input data, and height thresholds equal to or greater than 1.5 m. These parameters showed a RMSE of 0.19 m. When terrain slope varied from 0–10% to 50–60%, the RMSE increased by 0.11 m. The RMSE decreased by 0.06 m when point density was increased from 4 to 8 points/m2, and increased by 0.05 m in dense vegetation areas.  相似文献   

3.
目前LiDAR技术已经成为DTM的主要生产方法。地面误差对LiDAR生成DTM的精度影响比较明显,特别是由于亚热带森林植被覆盖区LiDAR激光点云少,生成的DTM更复杂,需要分析地面误差对LiDAR生成林下DTM的精度影响。本文以华南农业大学增城教学科研基地为研究对象,从森林郁闭度和坡度两个方面探讨了地面误差对机载LiDAR数据生成林下DTM精度的影响。研究结果发现高程误差会随郁闭度的增大而增大;而随坡度变化趋势不明显,但是坡度为15°时成为误差的分水岭,其前后误差差异比较明显。总体而言,郁闭度的影响更为明显。  相似文献   

4.
Detecting soil salinity changes and its impact on vegetation cover are necessary to understand the relationships between these changes in vegetation cover. This study aims to determine the changes in soil salinity and vegetation cover in Al Hassa Oasis over the past 28 years and investigates whether the salinity change causing the change in vegetation cover. Landsat time series data of years 1985, 2000 and 2013 were used to generate Normalized Difference Vegetation Index (NDVI) and Soil Salinity Index (SI) images, which were then used in image differencing to identify vegetation and salinity change/no-change for two periods. Soil salinity during 2000–2013 exhibits much higher increase compared to 1985–2000, while the vegetation cover declined to 6.31% for the same period. Additionally, highly significant (p < 0.0001) negative relationships found between the NDVI and SI differencing images, confirmed the potential long-term linkage between the changes in soil salinity and vegetation cover.  相似文献   

5.
This study explores the possible linkages of El Nino/Southern Oscillation (ENSO) with vegetation and rainfall patterns, vegetation activity and food grain yields, in arid and semi-arid regions of western India. A sequence of 20-year (1981–2000) monthly maximum Normalized Difference Vegetation Index (NDVI) data from the Advanced Very High Resolution Radiometer (AVHRR) and monthly rainfall from 160 stations were examined to study the seasonal patterns and their relation to ENSO activity. In addition, a direct (ENSO-crop yield) linkage and an intermediate (ENSO-NDVI) linkage of agricultural responses to ENSO were also investigated. The results indicate below-normal seasonal NDVI and rainfall associated with El Nino (warm) events, except during 1997, while positive anomalies occur during La Nina (cold) events. Sea surface temperature (SST) anomalies from NINO 3 region (5°N–5°S; 150°W–90°W), as an indicator of ENSO were significantly correlated with NDVI anomalies, rainfall anomalies and yield anomalies but the Southern Oscillation Index (SOI) was significantly related to NDVI anomalies only. NDVI anomaly patterns correspond to rainfall variability including that associated with ENSO activity. The observed strong intermediate linkage between yield anomalies and NDVI anomaly signal (r = 0.609) indicates that NDVI is an ideal index for understanding and analysing agricultural response to ENSO climate teleconnections.  相似文献   

6.
Topography-NDVI (Normalized Difference Vegetation Index) correlations supported the definition of a topographic index (TI) summarizing topographical conditions for vegetation growth into a single index. "Thermal" aspect, slope, and elevation were consecutively incorporated—following tests of various algorithms—to reach the maximum (observed) improvement in TI-NDVI correlations. A case study produced a visually realistic TI pattern that was more closely correlated with NDVI than aspect by 16.5% (in terms of Pearson's r) in the case study area. The landscape meanings of the index and its dependency on data resolution/source and on study area were then evaluated.  相似文献   

7.
Fuzzy based soft classification have been used immensely for handling the mixed pixel and hence to extract the single class of interest. The present research attempts to extract the moist deciduous forest from MODIS temporal data using the Possibilistic c-Means (PCM) soft classification approach. Temporal MODIS (7 dates) data were used to identify moist deciduous forest and temporal AWiFS (7 dates) data were used as reference data for testing. The Simple Ratio (SR), Normalized Difference Vegetation Index (NDVI), Soil Adjusted Vegetation Index (SAVI), and Transformed Normalized Difference Vegetation Index (TNDVI) were used to generate the temporal vegetation indices for both the MODIS and the AWiFS datasets. It was observed from the research that the MODIS temporal NDVI data set1, which contain the minimum number of images and avoids the temporal images corresponding to the highest frequency stages of onset of greenness (OG) and end of senescence (ES) activity of moist deciduous forest have been found most suitable data set for identification of moist deciduous forest with the maximum fuzzy overall accuracy of 96.731 %.  相似文献   

8.
Expansion and heterogeneous clustering of commercial horticulture within the central highlands of Kenya after the mid-1990s impact watersheds and the sustainable resource management. This is distressing since climate conditions for world horticultural regions are projected to change, making such farming extremely difficult and costly to the environment. To understand the scope of impact on vegetation, the study evaluated (1) interannual variability in averaged normalized difference vegetation index (NDVI); (2) trends in average annual NDVI before and after 1990 – the presumed onset of rapid horticulture; and (3) relationship between the average annual NDVI and large-scale commercial farms, population density, and mean annual rainfall in subwatersheds. Time-series analysis of long-term Global Inventory Modeling and Mapping Studies NDVI data were analyzed as indicator of vegetation condition. NDVI trends before 1990s (1982–1989) and after 1990s (1990–2006) were evaluated to determine the slope (sign), and the Spearman’s correlation coefficient (strength). Overall, results show considerable variations in vegetation condition due largely to mixed factors including intensive farming activities, drought, and rainfall variation. Statistical analysis shows significant differences in slopes before 1990 and after 1990 (p < 0.05 and p < 0.1 respectively). Negative (decline) trends were common after 1990, linked to increased commercial horticulture and related anthropogenic disturbances on land cover. There was decline in vegetation over densely populated subwatersheds, though low NDVI values in 1984 and 2000 were the effect of severe droughts. Understanding the linkage between vegetation responses to the effects of human-induced pressure at the subwatershed scale can help natural resource managers approach conservation measures more effectively.  相似文献   

9.
针对非均质中低分辨率像元的叶面积指数LAI验证中如何布设基本采样单元ESU的问题,提出基于NDVI先验知识的ESU布设方法,并采用不同植被类型、不同均匀程度的地表作为模拟场,分析对比了方法的精度及稳定性。结果显示,本文方法用NDVI先验知识描述植被的生长空间分布信息,能相对准确地划分植被的不同生长水平,有效降低层内方差。在草地和森林地区的试验中,精度与稳定性均优于传统的随机采样、均匀采样和基于分类图的3种采样方法。因此,本文提出的采样方法为大尺度非均质区域LAI地面验证的采样方案提供了新的设计思路。  相似文献   

10.
Monitoring of Agricultural crops using remote sensing data is an emerging tool in recent years. Spatial determination of sowing date is an important input of any crop model. Geostationary satellite has the capability to provide data at high temporal interval to monitor vegetation throughout the entire growth period. A study was conducted to estimate the sowing date of wheat crop in major wheat growing states viz. Punjab, Haryana, Uttar Pradesh (UP), Madhya Pradesh (MP), Rajasthan and Bihar. Data acquired by Charged Couple Detector (CCD) onboard Indian geostationary satellite INSAT 3A have continental (Asia) coverage at 1 km?×?1 km spatial resolution in optical spectral bands with high temporal frequency. Daily operational Normalized Difference Vegetation Index (NDVI) product from INSAT 3A CCD available through Meteorological and Oceanographic Satellite Data Archival Centre (MOSDAC) was used to estimate sowing date of wheat crop in selected six states. Daily NDVI data acquired from September 1, 2010 to December 31, 2010 were used in this study. A composite of 7 days was prepared for further analysis of temporal profile of NDVI. Spatial wheat crop map derived from AWiFS (56 m) were re-sampled at INSAT 3A CCD parent resolution and applied over each 7 day composite. The characteristic temporal profiles of 7 day NDVI composite was used to determine sowing date. NDVI profile showed decreasing trend during maturity of kharif crop, minimum value after harvest and increasing trend after emergence of wheat crop. A mathematical model was made to capture the persistent positive slope of NDVI profile after an inflection point. The change in behavior of NDVI profile was detected on the basis of change in NDVI threshold of 0.3 and sowing date was estimated for wheat crop in six states. Seven days has been deducted after it reached to threshold value with persistent positive slope to get sowing date. The clear distinction between early sowing and late sowing regions was observed in study area. Variation of sowing date was observed ranging from November 1 to December 20. The estimated sowing date was validated with the reported sowing date for the known wheat crop regions. The RMSD of 3.2 (n?=?45) has been observed for wheat sowing date. This methodology can also be applied over different crops with the availability of crop maps.  相似文献   

11.
Effective conservation and management of natural resources requires up-to-date information of the land cover (LC) types and their dynamics. Multi-resolution remote sensing (RS) data coupled with additional ancillary topographical layers (both remotely acquired or derived from ground measurements) with appropriate classification strategies would be more effective in capturing LC dynamics and changes associated with the natural resources. Ancillary information would make the decision boundaries between the LC classes more widely separable, enabling classification with higher accuracy compared to conventional methods of RS data classification. In this work, we ascertain the possibility of improvement in classification accuracy of RS data with the addition of ancillary and derived geographical layers such as vegetation indices, temperature, digital elevation model, aspect, slope and texture, implemented in three different terrains of varying topography—urbanised landscape (Greater Bangalore), forested landscape (Western Ghats) and rugged terrain (Western Himalaya). The study showed that use of additional spatial ancillary and derived information significantly improved the classification accuracy compared to the classification of only original spectral bands. The analysis revealed that in a highly urbanised area with less vegetation cover and contrasting features, inclusion of elevation and texture increased the overall accuracy of IKONOS data classification to 88.72% (3.5% improvement), and inclusion of temperature, NDVI, EVI, elevation, slope, aspect, Panchromatic band along with texture measures, significantly increased the overall accuracy of Landsat ETM+ data classification to 83.15% (7.6% improvement). In a forested landscape with moderate elevation, temperature was useful in improving the overall accuracy by 6.7 to 88.26%, and in a rugged terrain with temperate climate, temperature, EVI, elevation, slope, aspect and Panchromatic band significantly improved the classification accuracy to 89.97% (10.84% improvement) compared to the classification of only original spectral bands, suggesting selection of appropriate ancillary data depending on the terrain.  相似文献   

12.
Phenology is a sensitive and critical feature of vegetation and is a good indicator for climate change studies. The global inventory modelling and mapping studies (GIMMS) normalized difference vegetation index (NDVI) has been the most widely used data source for monitoring of the vegetation dynamics over large geographical areas in the past two decades. With the release of the third version of the NDVI (GIMMS NDVI3g) recently, it is important to compare the NDVI3g data with those of the previous version (NDVIg) to link existing studies with future applications of the NDVI3g in monitoring vegetation phenology. In this study, the three most popular satellite start of vegetation growing season (SOS) extraction methods were used, and the differences between SOSg and SOS3g arising from the methods were explored. The amplitude and the peak values of the NDVI3g are higher than those of the NDVIg curve, which indicated that the SOS derived from the NDVIg (SOSg) was significantly later than that derived from the NDVI3g (SOS3g) based on all the methods, for the whole northern hemisphere. In addition, SOSg and SOS3g both showed an advancing trend during 1982–2006, but that trend was more significant with SOSg than with SOS3g in the results from all three methods. In summary, the difference between SOSg and SOS3g (in the multi-year mean SOS, SOS change slope and the turning point in the time series) varied among the methods and was partly related to latitude. For the multi-year mean SOS, the difference increased with latitude intervals in the low latitudes (0–30°N) and decreased in the mid- and high-latitude intervals. The GIMMS NDVI3g data-sets seemed more sensitive than the GIMMS NDVIg in detecting information about the ground, and the SOS3g data were better correlated both with the in situ observations and the SOS derived from the Moderate Resolution Imaging Spectroradiometer NDVI. For the northern hemisphere, previous satellite measures (SOS derived from GIMMS NDVIg) may have overestimated the advancing trend of the SOS by an average of 0.032 d yr–1.  相似文献   

13.
There are now a wide range of techniques that can be combined for image analysis. These include the use of object-based classifications rather than pixel-based classifiers, the use of LiDAR to determine vegetation height and vertical structure, as well terrain variables such as topographic wetness index and slope that can be calculated using GIS. This research investigates the benefits of combining these techniques to identify individual tree species. A QuickBird image and low point density LiDAR data for a coastal region in New Zealand was used to examine the possibility of mapping Pohutukawa trees which are regarded as an iconic tree in New Zealand. The study area included a mix of buildings and vegetation types. After image and LiDAR preparation, single tree objects were identified using a range of techniques including: a threshold of above ground height to eliminate ground based objects; Normalised Difference Vegetation Index and elevation difference between the first and last return of LiDAR data to distinguish vegetation from buildings; geometric information to separate clusters of trees from single trees, and treetop identification and region growing techniques to separate tree clusters into single tree crowns. Important feature variables were identified using Random Forest, and the Support Vector Machine provided the classification. The combined techniques using LiDAR and spectral data produced an overall accuracy of 85.4% (Kappa 80.6%). Classification using just the spectral data produced an overall accuracy of 75.8% (Kappa 67.8%). The research findings demonstrate how the combining of LiDAR and spectral data improves classification for Pohutukawa trees.  相似文献   

14.
Discriminating laser scanner data points belonging to ground from points above-ground (vegetation or buildings) is a key issue in research. Methods for filtering points into ground and non-ground classes have been widely studied mostly on datasets derived from airborne laser scanners, less so for terrestrial laser scanners. Recent developments in terrestrial laser sensors (longer ranges, faster acquisition and multiple return echoes) has aroused greater interest for surface modelling applications. The downside of TLS is that a typical dataset has high variability in point density, with evident side-effects on processing methods and CPU-time. In this work we use a scan dataset from a sensor which returns multiple target echoes, in this case providing more than 70 million points on our study site. The area presents low, medium and high vegetation, undergrowth with varying density, as well as bare ground with varying morphology (i.e. very steep slopes as well as flat areas). We test an integrated work-flow for defining a terrain and surface model (DTM and DSM) and successively for extracting information on vegetation density and height distribution on such a complex environment. Attention was given to efficiency and speed of processing. The method consists on a first step which subsets the original points to define ground candidates by taking into account the ordinal return number and the amplitude. A custom progressive morphological filter (opening operation) is applied next, on ground candidate points using a multidimensional grid to account for the fallout in point density as a function of distance from scanner. Vegetation density mapping over the area is then estimated using a weighted ratio of point counts in the tri-dimensional space over each cell. The overall result is a pipeline for processing TLS points clouds with minimal user interaction, producing a Digital Terrain Model (DTM), a Digital Surface Model (DSM), a vegetation density map and a derived Canopy Height Model (CHM). These products are of high importance for many applications ranging from forestry to hydrology and geomorphology.  相似文献   

15.
Digital elevation models (DEMs) are essential to various applications in topography, geomorphology, hydrology, and ecology. The Shuttle Radar Topographic Mission (SRTM) DEM data set is one of the most complete and most widely used DEM data sets; it provides accurate information on elevations over bare land areas. However, the accuracy of SRTM data over vegetated mountain areas is relatively low as a result of the high relief and the penetration limitation of the C-band used for obtaining global DEM products. The objective of this study is to assess the performance of SRTM DEMs and correct them over vegetated mountain areas with small-footprint airborne Light Detection and Ranging (Lidar) data, which can develop elevation products and vegetation products [e.g., vegetation height, Leaf Area Index (LAI)] of high accuracy. The assessing results show that SRTM elevations are systematically higher than those of the actual land surfaces over vegetated mountain areas. The mean difference between SRTM DEM and Lidar DEM increases with vegetation height, whereas the standard deviation of the difference increases with slope. To improve the accuracy of SRTM DEM over vegetated mountain areas, a regression model between the SRTM elevation bias and vegetation height, LAI, and slope was developed based on one control site. Without changing any coefficients, this model was proved to be applicable in all the nine study sites, which have various topography and vegetation conditions. The mean bias of the corrected SRTM DEM at the nine study sites using this model (absolute value) is 89% smaller than that of the original SRTM DEM, and the standard deviation of the corrected SRTM elevation bias is 11% smaller.  相似文献   

16.
Soil organic carbon (SOC) is an important aspect of soil quality and plays an imperative role in soil productivity in the agriculture ecosystems. The present study was applied to estimate the SOC stock using space-borne satellite data (Landsat 4–5 Thematic Mapper [TM]) and ground verification in the Medinipur Block, Paschim Medinipur District and West Bengal in India. In total, 50 soil samples were collected randomly from the region according to field surveys using a hand-held Global Positioning System (GPS) unit to estimate the surface SOC concentrations in the laboratory. Bare soil index (BSI) and normalized difference vegetation ndex (NDVI) were explored from TM data. The satellite data-derived indices were used to estimate spatial distribution of SOC using multivariate regression model. The regression analysis was performed to determine the relationship between SOC and spectral indices (NDVI and BSI) and compared the observed SOC (field measure) to predict SOC (estimated from satellite images). Goodness fit test was performed to determine the significance of the relationship between observed and predicted SOC at p ≤ 0.05 level. The results of regression analysis between observed SOC and NDVI values showed significant relationship (R2 = 0.54; p < 0.0075). A significant statistical relationship (r = ?0.72) was also observed between SOC and BSI. Finally, our model showed nearly 71% of the variance of SOC distribution could be explained by SOC and NDVI values. The information from this study has advanced our understanding of the ongoing ecological development that affects SOC dissemination and might be valuable for effective soil management.  相似文献   

17.
Satellite derived vegetation vigour has been successfully used for various environmental modeling since 1972. However, extraction of reliable annual growth information about natural vegetation (i.e., phenology) has been of recent interest due to their important role in many global models and free availability of time-series satellite data. In this study, usability of Moderate Resolution Imaging Spectro-radiometer (MODIS) and Global Inventory Modelling and Mapping Studies (GIMMS) based products in extracting phenology information about evergreen, semi-evergreen, moist deciduous and dry deciduous vegetation in India was explored. The MODIS NDVI and EVI time-series data (MOD13C1: 5.6 km spatial resolution with 16 day temporal resolution—2001 to 2010) and GIMMS NDVI time-series data(8 km spatial resolution with 15 day temporal resolution—2000 to 2006) were used. These three differently derived vegetation indices were analysed to extract and understand the vegetative growth rhythm over different regions of India. Algorithm was developed to derive onset of greenness and end of senescence automatically. The comparative analysis about differences in the results from these products was carried out. Due to dominant noise in the values of NDVI from GIMMS and MODIS during monsoon period the phenology rhythm were wrongly depicted, especially for evergreen and semi-evergreen vegetation in India. Hence, care is needed before using these data sets for understanding vegetative dynamics, biomass cestimation and carbon studies. MODIS EVI based results were truthful and comparable to ground reality. The study reveals spatio-temporal patterns of phenology, rate of greening, rate of senescence, and differences in results from these three products.  相似文献   

18.
Soil moisture (SM) content is one of the most important environmental variables in relation to land surface climatology, hydrology, and ecology. Long-term SM data-sets on a regional scale provide reasonable information about climate change and global warming specific regions. The aim of this research work is to develop an integrated methodology for SM of kastanozems soils using multispectral satellite data. The study area is Tuv (48°40′30″N and 106°15′55″E) province in the forest steppe zones in Mongolia. In addition to this, land surface temperature (LST) and normalized difference vegetation index (NDVI) from Landsat satellite images were integrated for the assessment. Furthermore, we used a digital elevation model (DEM) from ASTER satellite image with 30-m resolution. Aspect and slope maps were derived from this DEM. The soil moisture index (SMI) was obtained using spectral information from Landsat satellite data. We used regression analysis to develop the model. The model shows how SMI from satellite depends on LST, NDVI, DEM, Slope, and Aspect in the agricultural area. The results of the model were correlated with the ground SM data in Tuv province. The results indicate that there is a good agreement between output SM and SM of ground truth for agricultural area. Further research is focused on moisture mapping for different natural zones in Mongolia. The innovative part of this research is to estimate SM using drivers which are vegetation, land surface temperature, elevation, aspect, and slope in the forested steppe area. This integrative methodology can be applied for different regions with forest and desert steppe zones.  相似文献   

19.
Our study examines the relationships among various environmental variables in Surat city using remote sensing. Landsat Thematic Mapper satellite data were used in conjugation with geospatial techniques to study urbanization and correlation among satellite-derived biophysical parameters namely, normalized difference vegetation index (NDVI), normalized difference built-up index (NDBI), normalized difference water index (NDWI), normalized difference bareness index (NDBaI) and land surface temperature (LST). A modified NDWI (MNDWI) was used for extracting areas under water. Land use/land cover classification was performed using hierarchical decision tree classification technique using ERDAS IMAGINE Expert classifier with an accuracy of 90.4% for 1990 and 85% for 2009. It was found that city has expanded over 42.75 sq.km within two decades. Built-up, fallow and sediment land use classes exhibited high dynamics with increase of nearly 200% and 50% and decrease of 55% respectively from 1990 to 2009. Vegetation and water classes were less dynamic with 20% decrease and 15% increase. The transformation of land parcels from vegetation to built-up, vegetation to fallow and fallow to built-up has resulted in increase of LST by 5.5 ± 2.6°C, 6.7 ± 3°C and 3.5 ± 2.9°C, respectively.  相似文献   

20.
On the night of 27th Sept 2012, a hydrogen fluoride (HF) storage tank exploded in the industrial area of Gumi, Korea. In this study, an attempt was made to detect the damaged vegetation using a hyperspectral image. Assuming that HF was the most significant stressor of vegetation near the blast site, our results indicated that the difference in reflectance values between the 786 and 801 nm wavelengths became negative (?) and fluctuated from ?5 to ?160 in the affected vegetation. On the other hand, positive (+) values were found in the non-affected vegetation. The combination of normalized difference vegetation index (NDVI) and simple ratio (SR) was used [named combined vegetation index (CVI) in this study] to assess the accuracy of these measurements. Among 150,965 pixels that were defined as damaged vegetation, about 2.8 % were analyzed incorrectly in this study. As a result, factors such as wind direction, distance from the accident spot, elevation, and aspect were shown to affect damage distribution.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号