首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 32 毫秒
1.
The Eocene–Miocene carbonate deposition in the Gulf of Papua (GoP) corresponds to the carbonate evolution phase of this continental margin mixed depositional system. Global sea‐level (eustatic) fluctuations appear to have been the most important factor influencing the mixed depositional system development during its carbonate phase. Development of the major carbonate system in the Gulf was initiated during the Eocene. Subsequent to an early Oligocene hiatus, the carbonate system expanded its surface area, vertically aggraded, then systematically backstepped, and finally partially drowned during the late Oligocene–early part of the early Miocene. During the late early Miocene–early middle Miocene, the carbonate system continued its vertical growth in most platform areas, where it was able to keep up with sea‐level rise. At the early middle/late middle Miocene (Langhian/Serravallian) boundary, carbonate deposition shifted downward during a long‐term sea‐level regression, exposing most of the early middle Miocene platform tops. Following this downward shift, active carbonate production became restricted during the late middle Miocene to only the northeastern part of the study area, and carbonate accumulation was characterized by four systematically prograding units. At the very beginning of the late Miocene, the platform tops were re‐flooded. The carbonate system was partially drowned, systematically backstepped, and locally aggraded during part of the late Miocene, the early Pliocene, and the Quaternary. The overall organization of the carbonate sequence geometries, observed in the GoP, display a clear pattern, often referred to as the Oligocene–Neogene stratigraphic signature. This pattern is identical to contemporaneous sedimentary patterns observed in pure carbonate systems such as in the Maldives and in the Bahamas, and also in some siliciclastic systems. Because this pattern is observed in several globally distributed locations, the recognition of the Oligocene–Neogene stratigraphic signature in the GoP demonstrates that the depositional evolution during the late Oligocene–Miocene and the early Pliocene must have been dominantly controlled by eustatic fluctuations.  相似文献   

2.
《Basin Research》2018,30(Z1):596-612
The formation of syn‐depositional fractures in carbonate platforms is considered an important feature in the understanding of platform evolution. This study investigates the mechanisms of fracture formation in rimmed flat‐topped carbonate platforms in the very well‐exposed Cariatiz Miocene Fringing Reef Unit, SE Spain. Fracture data were obtained using a combination of LIDAR and field mapping techniques, which proved useful in understanding general fracture trends. The morphological expression of fracture sets, preferred fracture localization, crosscutting relationships and fracture fill are characteristics that provide constraints on the timing of fracture formation and opening. Three dominant fracture populations were identified, amongst which a margin parallel and a margin perpendicular fracture set. Margin parallel fractures localize around the platform margin and form vertically extensive dikes that crosscut facies boundaries. The sedimentary fill of such fractures suggests syn‐depositional fracture formation under marine conditions. Together, fracture characteristics suggest a gravitational driver for the formation of tensile stress and the development of margin parallel fractures along the platform edge. Margin perpendicular structures form sub‐vertical dikes and fracture corridors. Margin perpendicular fractures localize on the platform slope and show two types of fracture fill, indicating marine and continental origins. Based on variations of fracture morphology along the carbonate platform, fracture localization, petrographic analysis of sedimentary fill and stable isotope analysis on sparite cements, we suggest a gravitational control on the formation of these fractures. Two mechanisms for the formation of subvertical margin perpendicular fractures are proposed: (1) principal stress rotation as a result of downslope loading. (2) Differential compaction over buried gulley systems on antecedent clinoform slopes. We suggest that the formation of sub‐vertical margin perpendicular fractures might be a systematic feature in slopes of flat‐topped carbonate platforms.  相似文献   

3.
Middle Miocene to Pliocene siliciclastics of the Bare Formation represent a long‐lived (ca. 11 Myr) break in the otherwise carbonate‐dominated shelf of the Northern Carnarvon Basin, Northwest Shelf of Australia. The quartz‐sandstone interval is correlated with the appearance of spectacular clinoform sets mapped on 3D and dense 2D seismic data. Twenty‐seven clinoform sets are interpreted as delta lobes primarily based on their plan‐view morphology (strike‐elongate to lobate features) and their 40–100‐m‐high clinoform amplitudes. The delta lobes were deposited on outer‐shelf to shelf‐edge positions, and the older deltas show evidence of a higher degree wave reworking than the younger deltas. Measurements of the along‐strike (migration) and down‐dip (progradation) movement of these deltas are compared with relative sea‐level behaviour inferred from shelf‐edge trajectory analysis. Delta lobes exhibit greater lateral shifting during relative sea‐level rise, whereas delta lobes are more restricted to dip‐oriented fairways during sea‐level fall, although no major incised valleys have been identified. Long‐term (cumulative) progradation of this delta system and subsequent backstepping correlates with long‐term sea‐level fall and rise during the late middle and late Miocene. In addition, a long‐term northeastward migration trend for these delta lobes was likely a result of localized uplift of an inversion anticline in the Rosemary–Legendre Trend; the growth of this anticline probably steered the fluvial source for the delta system towards the northeast. The Bare Formation siliciclastic influx correlates with other middle Miocene increases in siliciclastic sediment supply worldwide. Global cooling and a shift to more arid conditions, negatively influencing vegetation cover, may have combined with more seasonally variable rainfall to generate the high sediment supply that built the deltas. Retreat of the siliciclastics could correlate with ice‐sheet growth in the Northern Hemisphere and/or increase in the Indonesian Throughflow and Leeuwin Current (ca. 1.6 Ma), which might have modified climate regionally.  相似文献   

4.
The Miocene sedimentary succession of the southern Browse Basin records the response of a tropical reef system to long‐term, strong subsidence on a passive continental margin. Geological interpretation of a comprehensive two‐dimensional (2D) seismic reflectivity data set documents for the first time the development of a continuous Miocene barrier reef on the Australian North West Shelf. With a length of over 250 km, this barrier reef is among the Earth's largest in the Neogene record. A sequence stratigraphic analysis tied to well data shows that the main controls for the evolution, growth and demise of the reef system were subsidence, third‐order global‐scale eustatic variations and antecedent topography. The generally very high Miocene subsidence rates estimated for the study area cannot be explained by typical passive‐margin subsidence controlled by lithospheric cooling and sedimentary loading alone. Additional dynamic subsidence induced by mantle convection, though documented as unusually large on the northern margin of Australia during the Neogene, can be also regarded as being of only minor importance. Therefore, accelerated tectonic subsidence related to the collision of the Australian and Eurasian Plates 250–500 km north of the study area seems to exert an important influence on reef development and demise, complicated by local tectonic inversion. The Miocene tectonic reactivation and inversion of an older structural grain is interpreted to have controlled the reef development considerably by providing localized topographic highs along transpressional anticlines above basement‐rooted faults that served as preferential sites for reef growth and retreat during times of rapidly rising sea level. This exemplarily shows that the far‐field effects of collision‐induced tectonic subsidence can significantly influence carbonate systems on passive margins.  相似文献   

5.
《Basin Research》2018,30(4):671-687
The Mesozoic shelf margin in the Mahajanga Basin, northwest Madagascar, provides an example where inherited palaeobathymetry, coupled with sea‐level changes, high sediment supply and fluctuations in accommodation influenced the stacking patterns and geometry of clinoforms that accreted onto a passive rifted margin. Two‐dimensional (2D) seismic profiles are integrated with existing field data and geological maps to study the evolution of the margin. The basin contains complete records of transgression, highstand, regression and lowstand phases that took place from Jurassic to Cretaceous. Of particular interest is the Cretaceous, Albian to Turonian (ca. 113‐93 Ma), siliciclastic shelf margin that prograded above a drowned Middle Jurassic carbonate platform. The siliciclastic phase of the shelf margin advanced ca. 70 km within ca. 20 My, and contains 10 distinct clinoforms mapped along a 2D seismic reflection data set. The clinoforms show a progressive decrease in height and slope length, and a fairly constant slope gradient through time. The successive shelf edges begin with a persistent flat to slightly downward‐directed shelf‐edge trajectory that changes to an ascending trajectory at the end of clinoform progradation. The progressive decrease in clinoform height and slope length is attributed to a decrease in accommodation. The prograding margin is interpreted to have formed when siliciclastic input increased as eastern Madagascar was uplifted. This work highlights the importance of sediment supply and inherited palaeobathymetry as controls on the evolution of shelf margins and it provides a new understanding of the evolution of the Mahajanga Basin during the Mesozoic.  相似文献   

6.
《Basin Research》2018,30(4):650-670
The Palaeogene Isparta Basin of southwestern Anatolia formed between two convergent arms of the Isparta Bend orocline of the Tauride orogen. The origin of this tightening orocline is hypothetically explained in plate‐tectonic terms. Basin sedimentation commenced on a down‐warped Mesozoic carbonate platform of a crustal block accreted at the end of Cretaceous to the southern margin of the Anatolian plate. The basin earliest deposits are Palaeocene reddish mudstones with a fossil‐barren condensed basal part and increasingly interspersed with thin calcarenitic turbidites towards the top. The supply of turbiditic sediment to the basin plain subsequently increased, as the upper‐bathyal basin plain became surrounded from both sides by a narrow littoral shelf with an advancing turbiditic slope ramp. A major forced regression occurred at the end of Bartonian, causing incision of subaerial to submarine valleys up 600 m deep, filled in with gravelly to sandy turbidites and debrisflow deposits during the subsequent rise of relative sea level. The half‐filled valleys were re‐incised due to a Rupelian forced regression and were fully filled with fluvio‐deltaic bayhead deposits during a final marine transgression that re‐established the basin‐margin biocalcarenitic shelf. The littoral environment then expanded across the shallowing basin, as the basin axial zone was up‐domed and eroded to bedrock level at the end of Oligocene and the basin was tectonically inverted in Miocene. The pattern of intra‐orocline foreland sedimentation documented by this case study provides tentative criteria for the recognition of synorogenic oroclines and for their distinction from post‐orogenic oroclines.  相似文献   

7.
The sequence architecture and depositional evolution of the Ordovician carbonate platform margins in the Tarim Basin, China, were formed in response to the interplay of tectonism and sea‐level change, their history being documented by the integrated analysis of many seismic lines, drilling and outcrop data. The Ordovician carbonate system in the basin is divided into four composite sequences defined by major unconformities. Each sequence consists of a regional depositional cycle from transgression with an onlapping transgressive systems tract (TST) to regression with a prograding highstand systems tract (HST), and can be further subdivided into 10 third‐order sequences based on subordinate discontinuous boundaries at the carbonate platform marginal zones. Constrained by the marginal slope of the early‐rifted Manjiaer aulacogen, the carbonate platform margins of the Lower and Middle Ordovician that prograded eastward in an arcuate belt extending generally north‐south across the northern part of the basin. The development of the Tazhong uplift due to compression resulted in an extensive paleokarst hiatus between the Middle and the Upper Ordovician in the south‐central basin, and subsequently constrained the formation of a peninsula‐shaped carbonate platform whose margins were controlled by marginal thrust‐fault belts of the paleo‐uplift during the Late Ordovician. In the northern basin, the Late Ordovician carbonate platform margin developed around the marginal slope of the Tabei paleouplift. The transgressive–regressive cycles of the carbonate system are comparable and seem to have occurred simultaneously across the entire basin, suggesting that the cyclic sequence architecture was fundamentally controlled by eustatic fluctuations. Stacking patterns of the composite sequences varied due to the interplay between the accommodation produced by tectonism and sea‐level change, and the carbonate production rate. The reef–shoal facies complexes that developed along the platform margins, with paleokarst development at unconformities, constitute the major reservoir of large petroleum reserves in the basin.  相似文献   

8.
This paper describes a new 3‐D forward numerical model (CARBONATE 3D) that simulates the stratigraphic and sedimentological development of carbonate platforms and mixed carbonate–siliciclastic shelves by simulating the following sedimentary processes: (1) Carbonate shallow, open‐marine production, dependent on water depth, restriction and sediment input; (2) Carbonate shallow, restricted‐marine production, dependent on water restriction; (3) Pelagic sediment production and deposition; (4) Coarse and fine siliciclastic input; (5) Erosion, transport and redeposition of sediment, dependent on currents, slope, depth and restriction as well as sediment grain‐size and composition; (6) Dissolution of subaerially exposed carbonate. In this paper the model is used to investigate the controlling mechanisms on the sequence stratigraphy of isolated carbonate platforms and atolls and to predict distinctive architectural signatures from different drowning mechanisms. Investigation of the mechanisms controlling atoll strata shows that although relative sea‐level is the major control, antecedent topography, environmental setting and early diagenesis have profound influence on what stratigraphic geometries and facies develop. Hence care must be taken if sea‐level curves are interpreted from real stratigraphies. Atoll drowning by fast sea‐level rise, by lowered production and by repeated exposure and fast subsequent sea‐level rises are investigated and different stratigraphic signatures for the respective mechanisms predicted. A fast relative sea‐level rise results in a bucket‐shaped morphology developed prior to drowning and a sharp transition from the platform margin facies to a pelagic cover. Drowning caused by lowered platform margin production is predicted to result in the development of a dome‐shaped, shallow‐water shoal over the whole platform top prior to drowning. Fourth order amplitudes of several tens of metres, typical of ‘icehouse’ settings, cause atoll drowning at subsidence rates where atolls subject to fourth order amplitude of only a few metres, typical of ‘greenhouse’ settings, can keep up with the rising sea‐level. In the resultant strata, vertical facies belts are less well developed but horizontally extensive facies bands are more prominent. High fourth order amplitudes (up to 80 m) without sufficient third order scale subsidence will not lead to drowning, however, as the platform can recover in each fourth order lowstand. These results suggest that atolls might be easier to drown in ‘icehouse’ rather than in ‘greenhouse’ conditions but only in situations with suitably high rates of longer‐term relative sea‐level rise or sufficient lag times.  相似文献   

9.
The Phan Rang Carbonate Platform located offshore south Vietnam covers more than 15 000 km2, making it one of the largest carbonate platforms in the South China Sea. Based on 2‐D seismic analysis, this paper outlines the platform evolution and analyzes the regional tectonic, climatic and oceanic factors that controlled the platform growth and demise. This study of the Phan Rang Carbonate Platform therefore provides an analogue to the regions late Neogene carbonates that form important targets for petroleum exploration. Platform growth initiated during the late middle Miocene along the open marine Vietnamese margin and continued throughout the late synrift to early postrift period of the area terminating around Pliocene time. During this period, the structural grain, local and regional tectonics as well as oceanographic effects exerted major controls on carbonate deposition. Optimal growth conditions existed during initial platform deposition and locally accumulation rates reached ca. 230 m Ma?1. Late Miocene regional uplift caused subaerial exposure that interrupted platform growth and caused intense karstification. A gradual reestablishment of marine conditions promoted renewed platform growth. However, carbonate production was stressed by increased terrigenous input caused by onshore uplift and by inorganic nutrification of the surface waters. Nutrification probably occurred in response to increased nutrient influx derived from onshore denudation, enhanced periodically by soil ravinement during transgression. The onset or intensification of summer upwelling along the southern platform margin occurred in response to the onshore uplift and most likely contributed to the nutrification. The deteriorated growth conditions and fast subsidence resulted in platform split‐up, backstepping and local drowning. Subsequently, isolated platforms nucleated on structural highs as transgression continued. The remaining platforms thrived for a period but eventually failed to keep pace with subsidence, backstepped and drowned. The longest surviving platform now crops out at the seafloor at ca. 500 m depth.  相似文献   

10.
The Nanpanjiang Basin occurs in a key position for resolving controversies of basin tectonics and patterns of plate assembly at the junction between south China and Southeast Asian plates. Paleocurrent measurements indicate that siliciclastic turbidites in the basin were sourced by the Precambrian Jiangnan uplift to the northeast, the Precambrian Yunkai uplift to the southeast and the Triassic Songma suture to the south. Detrital zircon geochronology reveals Archean (2500 Ma), Paleoproterozoic (1800–1900 Ma), Neoproterozoic (900–1000 Ma) and Paleozoic (420–460 Ma) ages consistent with derivation from the Jiangnan and Yunkai uplifts. A large Permian‐Triassic peak of 250 Ma is present in the southern basin and attenuates northward suggesting derivation from an arc developed along the Songma suture. Sandstone QFL compositions average 65/12/23% and plot in the recycled orogen field except for a few samples in the southern basin that fall in the dissected arc field. The compositions are consistent with derivation from Precambrian basement that includes orogenic complexes. In the southern basin, Middle Triassic turbidites contain greater lithics and feldspars and Lower Triassic turbidites have volcaniclastic composition consistent with derivation from a southerly arc. Our preferred interpretation is evolution from remnant basin to a large peripheral foreland with southward subduction and convergence with Indochina along the Songma suture. The previously proposed Dian‐Qiong zone is not a suture as its map location places it within carbonate platforms bounded by identical stratigraphy. The Nan‐Uttaradit zone is too distant to have provided voluminous siliciclastic flux to the basin. The Nanpanjiang Basin provides an example of the evolution of an exceptionally large foreland with far‐field rejuvenation of Precambrian uplifts and carbonate platforms that were significantly influenced by siliciclastic flux. The timing and pattern of turbidite basin fill impacted platform evolution by enabling margin progradation in areas proximal to siliciclastic sources, whereas platforms distant from sources were driven to aggradation and extreme relief with large‐scale gravitational sector collapse.  相似文献   

11.
Detailed seismic stratigraphic analysis of 2D seismic data over the Faroe‐Shetland Escarpment has identified 13 seismic reflection units that record lava‐fed delta deposition during discrete periods of volcanism. Deposition was dominated by progradation, during which the time shoreline migrated a maximum distance of ～44 km in an ESE direction. Localised collapse of the delta front followed the end of progradation, as a decrease in volcanic activity left the delta unstable. Comparison with modern lava‐fed delta systems on Hawaii suggests that syn‐volcanic subsidence is a potential mechanism for apparent relative sea level rise and creation of new accommodation space during lava‐fed delta deposition. After the main phase of progradation, retrogradation of the delta occurred during a basinwide syn‐volcanic relative sea level rise where the shoreline migrated a maximum distance of ～75 km in a NNW direction. This rise in relative sea level was of the order of 175–200 m, and was followed by the progradation of smaller, perched lava‐fed deltas into the newly created accommodation space. Active delta deposition and the emplacement of lava flows feeding the delta front lasted ～2600 years, although the total duration of the lava‐fed delta system, including pauses between eruptions, may have been much longer.  相似文献   

12.
The Pennsylvanian marine foreland basin of the Cantabrian Zone (NW Spain) is characterized by the unique development of kilometre‐size and hundred‐metre‐thick carbonate platforms adjacent to deltaic systems. During Moscovian time, progradational clastic wedges fed by the orogen comprised proximal alluvial conglomerates and coal‐bearing deltaic sequences to distal shelfal marine deposits associated with carbonate platforms (Escalada Fm.) and distal clay‐rich submarine slopes. A first phase of carbonate platform development (Escalada I, upper Kashirian‐lower Podolskian) reached a thickness of 400 m, nearly 50 km in width and developed a distal high‐relief margin facing a starved basin, nearly 1000‐m deep. Carbonate slope clinoforms dipped up to 30° and consisted of in situ microbial boundstone, pinching out downslope into calciturbidites, argillaceous spiculites and breccias. The second carbonate platform (Escalada II, upper Podolskian‐lower Myachkovian) developed beyond the previous platform margin, following the basinward progradation of siliciclastic deposits. Both carbonate platforms include: (1) a lower part composed of siliciclastic‐carbonate cyclothems characterized by coated‐grain and ooid grainstones; and (2) a carbonate‐dominated upper part, composed of tabular and mound‐shaped wackestone and algal‐microbial boundstone strata alternating at the decametre scale with skeletal and coated‐grain grainstone beds. Carbonate platforms initiated in distal sectors of the foreland marine shelf during transgressions, when terrigenous sediments were stored in the proximal part, and developed further during highstands of 3rd‐order sequences in a high‐subsidence context. During the falling stage and lowstand systems tracts, deltaic systems prograded across the shelf burying the carbonate platforms. Key factors involved in the development of these unique carbonate platforms in an active foreland basin are: (1) the large size of the marine shelf (approaching 200 km in width); (2) the subsidence distribution pattern across the marine shelf, decreasing from proximal shoreline to distal sectors; (3) Pennsylvanian glacio‐eustacy affecting carbonate lithofacies architecture; and (4) the environmental conditions optimal for fostering microbial and algal carbonate factories.  相似文献   

13.
In order to evaluate the relationship between thrust loading and sedimentary facies evolution, we analyse the progradation of fluvial coarse‐grained deposits in the retroarc foreland basin system of the northern Andes of Colombia. We compare the observed sedimentary facies distribution with the calculated one‐dimensional (1D) Eocene to Quaternary sediment‐accumulation rates in the Medina wedge‐top basin and with a three‐dimensional (3D) sedimentary budget based on the interpretation of ～1800 km of industry‐style seismic reflection profiles and borehole data. Age constraints are derived from a new chronostratigraphic framework based on extensive fossil palynological assemblages. The sedimentological data from the Medina Basin reveal rapid accumulation of fluvial and lacustrine sediments at rates of up to ～500 m my?1 during the Miocene. Provenance data based on gravel petrography and paleocurrents reveal that these Miocene fluvial systems were sourced from Upper Cretaceous and Paleocene sedimentary units exposed to the west in the Eastern Cordillera. Peak sediment‐accumulation rates in the upper Carbonera Formation and the Guayabo Group occur during episodes of coarse‐grained facies progradation in the early and late Miocene proximal foredeep. We interpret this positive correlation between sediment accumulation and gravel deposition as the direct consequence of thrust activity along the Servitá–Lengupá faults. This contrasts with one class of models relating gravel progradation in more distal portions of foreland basin systems to episodes of tectonic quiescence.  相似文献   

14.
Sedimentary basins in the interior of orogenic plateaus can provide unique insights into the early history of plateau evolution and related geodynamic processes. The northern sectors of the Iranian Plateau of the Arabia–Eurasia collision zone offer the unique possibility to study middle–late Miocene terrestrial clastic and volcaniclastic sediments that allow assessing the nascent stages of collisional plateau formation. In particular, these sedimentary archives allow investigating several debated and poorly understood issues associated with the long‐term evolution of the Iranian Plateau, including the regional spatio‐temporal characteristics of sedimentation and deformation and the mechanisms of plateau growth. We document that middle–late Miocene crustal shortening and thickening processes led to the growth of a basement‐cored range (Takab Range Complex) in the interior of the plateau. This triggered the development of a foreland‐basin (Great Pari Basin) to the east between 16.5 and 10.7 Ma. By 10.7 Ma, a fast progradation of conglomerates over the foreland strata occurred, most likely during a decrease in flexural subsidence triggered by rock uplift along an intraforeland basement‐cored range (Mahneshan Range Complex). This was in turn followed by the final incorporation of the foreland deposits into the orogenic system and ensuing compartmentalization of the formerly contiguous foreland into several intermontane basins. Overall, our data suggest that shortening and thickening processes led to the outward and vertical growth of the northern sectors of the Iranian Plateau starting from the middle Miocene. This implies that mantle‐flow processes may have had a limited contribution toward building the Iranian Plateau in NW Iran.  相似文献   

15.
Deep‐marine deposits provide a valuable archive of process interactions between sediment gravity flows, pelagic sedimentation and thermohaline bottom‐currents. Stratigraphic successions can also record plate‐scale tectonic processes (e.g. continental breakup and shortening) that impact long‐term ocean circulation patterns, including changes in climate and biodiversity. One such setting is the Exmouth Plateau, offshore NW Australia, which has been a relatively stable, fine‐grained carbonate‐dominated continental margin from the Late Cretaceous to Present. We combine extensive 2D (~40,000 km) and 3D (3,627 km2) seismic reflection data with lithologic and biostratigraphic information from wells to reconstruct the tectonic and oceanographic evolution of this margin. We identified three large‐scale seismic units (SUs): (a) SU‐1 (Late Cretaceous)—500 m‐thick, and characterised by NE‐SW‐trending, slope‐normal elongate depocentres (c. 200 km long and 70 km wide), with erosional surfaces at their bases and tops, which are interpreted as the result of contour‐parallel bottom‐currents, coeval with the onset of opening of the Southern Ocean; (b) SU‐2 (Palaeocene—Late Miocene)—800 m‐thick and characterised by: (a) very large (amplitude, c. 40 m and wavelength, c. 3 km), SW‐migrating, NW‐SE‐trending sediment waves, (b) large (4 km‐wide, 100 m‐deep), NE‐trending scours that flank the sediment waves and (c) NW‐trending, 4 km‐wide and 80 m‐deep turbidite channel, infilled by NE‐dipping reflectors, which together may reflect an intensification of NE‐flowing bottom currents during a relative sea‐level fall following the establishment of circumpolar‐ocean current around Antarctica; and (c) SU‐3 (Late Miocene—Present)—1,000 m‐thick and is dominated by large (up to 100 km3) mass‐transport complexes (MTCs) derived from the continental margin (to the east) and the Exmouth Plateau Arch (to the west), and accumulated mainly in the adjacent Kangaroo Syncline. This change in depositional style may be linked to tectonically‐induced seabed tilting and folding caused by collision and subduction along the northern margin of the Australian plate. Hence, the stratigraphic record of the Exmouth Plateau provides a rich archive of plate‐scale regional geological events occurring along the distant southern (2,000 km away) and northern (1,500 km away) margins of the Australian plate.  相似文献   

16.
Numerical models were used to investigate the effects of differential compaction on strain development and early fracturing in an early cemented high‐relief Triassic carbonate platform prograding onto basinal sediments, whose thickness increases basinward. Results show that basinal sediment compaction induces stretching of internal platform and slope strata in prograding platforms. When sediments are early cemented, such extensional strain is accommodated by the generation of syndepositional fractures. The amount of stretching is predicted to increase from the oldest to the youngest layers, due to the thickening of the compactable basinal sequences towards the external parts of the platform. Stretching is also controlled by the characteristics of the basin: the thicker and the more compactable the basinal sediments, the larger will be the stretching. Numerical modelling has been applied to the Ladinian–Early Carnian carbonate platform of the Esino Limestone (Central Southern Alps of Italy). This case study is favourable for numerical modelling, as it is well exposed and both its internal geometry (inner platform, reef and prograding clinostratified slope deposits) and the relationship with the adjacent basin can be fully reconstructed, as the Alpine tectonic overprint is weak in the study area. Evidence for early fracturing (fractures filled by fibrous cements coeval with the platform development) is described and the location, orientation and width of the fractures measured. The fractures are mainly steeply dipping and oriented perpendicularly to the direction of progradation of the platform, mimicking local platform‐margin trends. The integration of numerical models with field data gives the opportunity to quantify the extension triggered by differential compaction and predict the possible distribution of early fractures in carbonate platforms of known geometry and thickness, whereas the interpretation of early fractures as the effects of differential compaction can be supported or rejected by the comparison with the results of ad hoc numerical modelling.  相似文献   

17.
Fluvio‐deltaic stratigraphy develops under continuous morphodynamic interactions of allogenic and autogenic processes, but the role and relative contribution of these processes to the stratigraphic record are poorly understood. We analysed synthetic fluvio‐deltaic deposits of several accommodation‐to‐supply cycles (sequences) with the aim to relate stratigraphic variability to autogenic and allogenic controls. The synthetic stratigraphy was produced in a series of long time‐scale (105 years) numerical experiments with an aggregated process‐based model using a typical passive‐margin topography with constant rates of liquid and solid river discharge subjected to sinusoidal sea‐level fluctuation. Post‐processing of synthetic stratigraphy allowed us to quantify stratigraphic variability by means of local and regional net sediment accumulation over equally spaced time intervals (1–10 kyr). The regional signal was subjected to different methods of time‐series analysis. In addition, major avulsion sites (>5 km from the coastline) were extracted from the synthetic stratigraphy to confirm the interpretations of our analyses. Regional stratigraphic variability as defined in this study is modulated by a long‐term allogenic signal, which reflects the rate of sea‐level fluctuation, and it preserves two autogenic frequency bands: the intermediate and high‐frequency components. The intermediate autogenic component corresponds to major avulsions with a median inter‐avulsion period of ca. 3 kyr. This component peaks during time intervals in which aggradation occurs on the delta plain, because super‐elevation of channel belts is a prerequisite for large‐scale avulsions. Major avulsions occur occasionally during early stages of relative sea‐level fall, but they are fully absent once the coast line reaches the shelf edge and incision takes place. These results are consistent with a number of field studies of falling‐stage deposition in fluvial systems. The high‐frequency autogenic component (decadal to centennial time scales) represents mouthbar‐induced bifurcations occurring at the terminal parts of the system, and to a lesser extent, partial or small‐scale avulsions (<5 km from the coastline). Bifurcation intensity correlates strongly with the rate of progradation, and thus reaches its maximum during forced regression. However, its contribution to overall stratigraphic variability is much less than that of the large‐scale avulsions, which affect the entire area downstream of avulsion nodes. The results of this study provide guidelines for predicting fluvio‐deltaic stratigraphy in the context of co‐existing autogenic and allogenic processes and underscore the fact that the relative importance and the type of autogenic processes occurring in fluvio‐deltaic systems are governed by allogenic forcing.  相似文献   

18.
This paper develops a tectono‐stratigraphic model for the evolution and drowning of Early Jurassic carbonate platforms. The model arises from outcrop analysis and Sr isotope dating of successions exposed in the Betic Cordillera in southeastern Spain. Here, an extensive Early Jurassic (Sinemurian) carbonate platform developed on the rifted Tethyan margin of the Iberian Plate. The platform was dissected by extensional faults in early jamesoni times (ca. 191 Ma) and again in late ibex times (ca.188 Ma) during the Pliensbachian stage. Extensional faults and fault block rotation are shown to control the formation of three sequence boundaries that divide the platform stratigraphy (the Gavilan Formation) into three depositional sequences. The last sequence boundary marks localised drowning of the platform and deposition of the deeper water Zegri Formation, whereas adjacent platforms remain exposed or continue as the site of shallow‐marine sediment accumulation. This study is based on mapping, facies analysis and dating of platform carbonates exposed in three tectonic units within the zone: Gabar, Ponce and Canteras. Facies analysis leads to the recognition of facies associations deposited in carbonate ramp environments and adjacent to synsedimentary, marine, fault scarps. Sr isotope dating enables us to correlate platform‐top carbonates from the different tectonic units at a precision equivalent to ammonite zones. A sequence stratigraphic analysis of sections from the three tectonic units is carried out using the facies models together with the Sr isotope dates. This analysis indicates a clear tectonic control on the development of the stratigraphy: depositional sequences vary in thickness, have wedge‐shaped geometries and vary in facies, internal geometries and systems tracts from one tectonic unit to another. Criteria characterising depositional sequences and sequence boundaries from the Gabar and Ponce units are used to establish a tectono‐stratigraphic model for carbonate platform depositional sequences and sequence boundaries in maritime rifts, which can be applied to other less well‐exposed or subsurface successions from other sedimentary basins. Onlapping transgressive and progradational highstand systems tracts are recognised on dip slope ramps. Falling stage and lowstand systems tracts are developed as thick breccia units in hangingwall areas adjacent to extensional faults. Sequence boundaries vary in character, amplitude and/or duration of sea‐level fall and persistence across the area. Some boundaries coalesce onto the Canteras unit, which remained as a relatively positive area throughout the early Pliensbachian (Carixian). The carbonate platform on the Ponce tectonic unit drowned in the latest Carixian (davoei biozone). However, the adjacent tectonic units remained emergent and developed a long‐lived sequence boundary, indicating tectonic subsidence as the major cause for platform drowning. The stratigraphic evolution of this area on the rifted southern Iberian margin indicates that a widespread restricted shallow‐water carbonate platform environment accumulating peritidal carbonates evolved with faulting to a more open‐marine setting. Sr dating indicates that this transition took place around the Sinemurian–Pliesbachian boundary and it was driven by local fault‐related subsidence together with likely post‐faulting regional subsidence.  相似文献   

19.
This article reports a stratigraphic and structural analysis of the Neogene‐Quaternary Valdelsa Basin (Central Italy), filled with up to 1000 m of uppermost Miocene to lower Pleistocene strata. The succession is subdivided into seven unconformity‐bounded stratigraphic units (synthems, or large‐scale depositional sequences) that include fluvio‐deltaic and shallow‐marine deposits. Structures related to basin shoulders and internal boundaries controlled the Neogene location and geometry of different depocentres. During the Tortonian‐Messinian, a buried NE‐trending high related to regional, basin‐transverse lineaments separated two adjacent sub‐basins. During the lower Pliocene, compressional displacement along NW‐trending, thrust‐related highs controlled the distribution of depocentres and dispersal of sediment. Extensional tectonics, although previously considered the dominant deformation style affecting the rear of the Northern Apennines since the late Miocene, is no longer considered a dominant control on tectono‐sedimentary development of the Valdelsa basin. Instead, the Valdelsa Basin shares features with continental hinterland basins of orogenic belts where compression, extension, and transcurrent stress fields determine a complex spatial and temporal record of accommodation and sediment supply. In the Valdelsa Basin tectonics and eustatic sea‐level fluctuations were dominant in forcing the deposition of sedimentary cycles at several scales. Zanclean and Gelasian large‐scale depositional sequences were mainly controlled by crustal shortening, whereas a eustatic signal was preferentially recorded during the Piacenzian. Smaller scale depositional sequences, common to most synthems, were controlled by orbitally forced glacio‐eustatic cycles.  相似文献   

20.
Sea‐level changes provide an important control on the interplay between accommodation space and sediment supply, in particular, for shallow‐water basins where the available space is limited. Sediment exchange between connected basins separated by a subaqueous sill (bathymetric threshold) is still not well understood. When sea‐level falls below the bathymetric level of this separating sill, the shallow‐water basin evolution is controlled by its erosion and rapid fill. Once this marginal basin is filled, the sedimentary depocenter shifts to the open marine basin (outward shift). With new accommodation space created during the subsequent sea‐level rise, sediment depocenter shifts backwards to the marginal basin (inward shift). This new conceptual model is tested here in the context of Late Miocene to Quaternary evolution of the open connection between Dacian and Black Sea basins. By the means of seismic sequence stratigraphic analysis of the Miocene‐Pliocene evolution of this Eastern Paratethys domain, this case study demonstrates these shifts in sedimentary depocenter between basins. An outward shift occurs with a delay that corresponds to the time required to fill the remaining accommodation space in the Dacian Basin below the sill that separates it from the Black Sea. This study provides novel insight on the amplitude and sedimentary geometry of the Messinian Salinity Crisis (MSC) event in the Black Sea. A large (1.3–1.7 km) sea‐level drop is demonstrated by quantifying coeval sedimentation patterns that change to mass‐flows and turbiditic deposits in the deep‐sea part of this main sink. The post‐MSC sediment routing continued into the present‐day pattern of Black Sea rivers discharge.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号