共查询到20条相似文献，搜索用时 46 毫秒
1.
The Macraes gold-tungsten deposit occurs in a low-angle thrust system in biotite grade Otago Schist. Native gold, scheelite, pyrite and arsenopyrite are found in and adjacent to quartz veins and silicified schist of lenticular reef zones, where the thrust system cuts through graphitic pelitic schist. Mineralization is confined to a shear zone, up to 80 m thick, which is closely sub-parallel to the regional schistosity. Chemical alteration is dominated by silicification, with some addition of Cr and depletion of Sr and Ba. Alteration extends only about 5 m from major veins. Oxygen becomes isotopically heavier away from veins due to temperature decrease as hot fluids penetrated into cooler (250°C?) rock. Graphite within the shear zone rocks has reflectance of 6–7% (in oil), similar to graphite in medium-high grade Otago Schist, and is presumed to be metamorphic in origin. This graphite has acted as a reducing agent to cause precipitation of gold where the thrust system, acting as a conduit for metamorphic fluids, intersects the graphitic schist. The metals were derived from the underlying schist pile which may include an over-thrust oceanic assemblage containing metal-enriched horizons. 相似文献
2.
The Qolqoleh gold deposit is located in the northwestern part of the Sanandai‐Sirjan Zone, northwest of Iran. Gold mineralization in the Qolqoleh deposit is almost entirely confined to a series of steeply dipping ductile–brittle shear zones generated during Late Cretaceous–Tertiary continental collision between the Afro‐Arabian and the Iranian microcontinent. The host rocks are Mesozoic volcano‐sedimentary sequences consisting of felsic to mafic metavolcanics, which are metamorphosed to greenschist facies, sericite and chlorite schists. The gold orebodies were found within strong ductile deformation to late brittle deformation. Ore‐controlling structure is NE–SW‐trending oblique thrust with vergence toward south ductile–brittle shear zone. The highly strained host rocks show a combination of mylonitic and cataclastic microstructures, including crystal–plastic deformation and grain size reduction by recrystalization of quartz and mica. The gold orebodies are composed of Au‐bearing highly deformed and altered mylonitic host rocks and cross‐cutting Au‐ and sulfide‐bearing quartz veins. Approximately half of the mineralization is in the form of dissemination in the mylonite and the remainder was clearly emplaced as a result of brittle deformation in quartz–sulfide microfractures, microveins and veins. Only low volumes of gold concentration was introduced during ductile deformation, whereas, during the evident brittle deformation phase, competence contrasts allowed fracturing to focus on the quartz–sericite domain boundaries of the mylonitic foliation, thus permitting the introduction of auriferous fluid to create disseminated and cross‐cutting Au‐quartz veins. According to mineral assemblages and alteration intensity, hydrothermal alteration could be divided into three zones: silicification and sulfidation zone (major ore body); sericite and carbonate alteration zone; and sericite–chlorite alteration zone that may be taken to imply wall‐rock interaction with near neutral fluids (pH 5–6). Silicified and sulfide alteration zone is observed in the inner parts of alteration zones. High gold grades belong to silicified highly deformed mylonitic and ultramylonitic domains and silicified sulfide‐bearing microveins. Based on paragenetic relationships, three main stages of mineralization are recognized in the Qolqoleh gold deposit. Stage I encompasses deposition of large volumes of milky quartz and pyrite. Stage II includes gray and buck quartz, pyrite and minor calcite, sphalerite, subordinate chalcopyrite and gold ores. Stage III consists of comb quartz and calcite, magnetite, sphalerite, chalcopyrite, arsenopyrite, pyrrhotite and gold ores. Studies on regional geology, ore geology and ore‐forming stages have proved that the Qolqoleh deposit was formed in the compression–extension stage during the Late Cretaceous–Tertiary continental collision in a ductile–brittle shear zone, and is characterized by orogenic gold deposits. 相似文献
3.
The Macraes orogenic gold deposit is hosted by a graphitic micaceous schist containing auriferous porphyroblastic sulphides. The host rock resembles zones of unmineralised micaceous graphitic pyritic schists, derived from argillaceous protoliths, that occur locally in background pelitic Otago Schist metasediments. This study was aimed at determining the relationship between these similar rock types, and whether the relationship had implications for ore formation. Argillites in the protolith turbidites of the Otago Schist metamorphic belt contain minor amounts of detrital organic matter (<0.1 wt.%) and diagenetic pyrite (<0.3 wt.% S). The detrital organic carbon was mobilised by metamorphic–hydrothermal fluids and redeposited as graphite in low-grade metaturbidites (pumpellyite–actinolite and greenschist facies). This carbon mobility occurred through >50 million years of evolution of the metamorphic belt, from development of sheared argillite in the Jurassic, to postmetamorphic ductile extension in the Cretaceous. Introduced graphite is structurally controlled and occurs with metamorphic muscovite and chlorite as veins and slicken-sided shears, with some veins having >50% noncarbonate carbon. Graphitic foliation seams in low-grade micaceous schist and metamorphic quartz veins contain equant graphite porphyroblasts up to 2 mm across that are composed of crystallographically homogeneous graphite crystals. Graphite reflectance is anisotropic and ranges from ~1% to ~8% (green light). Texturally similar porphyroblastic pyrite has grown in micaceous schist (up to 10 wt.% S), metamorphic quartz veins and associated muscovite-rich shears. These pyritic schists are weakly enriched in arsenic (up to 60 ppm). The low-grade metamorphic mobility and concentration of graphite in micaceous schists is interpreted to be a precursor process that structurally and geochemically prepared parts of the Otago Schist belt for later (more restricted) gold mineralisation. Economic amounts of gold, and associated arsenic, were subsequently introduced to carbonaceous sulphidic schists in the Macraes gold deposit by a separate metamorphic fluid derived from high-grade metaturbidites. Fluid flow at all stages in these processes occurred at metamorphic rates (mm/year), and fluids were broadly in equilibrium with the rocks through which they were passing. 相似文献
4.
Ductilely deformed veins consisting of quartz+andalusite, in which the andalusite is partially replaced by fibrous sillimanite, locally occur in garnet–sillimanite schist near a margin of the Niğde metamorphic core complex in south-central Turkey. Mineral assemblages, reaction textures and structural features of the veins record low-pressure–high-temperature deformation during exhumation of mid-crustal rocks. The partial replacement of andalusite by sillimanite may indicate a late-stage increase in temperature and/or fluid pressure, possibly related to Miocene magmatism, during extensional unroofing of the core complex. Aluminosilicate-bearing veins are observed at the eastern margin of the massif where metapelitic rocks were deformed during unroofing of the core complex. Veins formed in aluminous rocks where deformation-enhanced permeability allowed fluid flow during extensional shear. The cm-scale veins are typically boudinaged and form asymmetric lenses concordant with the host rock foliation and are parallel to the down-dip lineation defined by sillimanite and stretched biotite. Aluminosilicate-bearing boudins record top-to-the-east shear sense, which is compatible with the extensional shear sense displayed by structures in the host rock. 相似文献
5.
Gold mineralization without quartz veins in a ductile-brittle shear zone, Macraes Mine, Otago Schist, New Zealand 总被引：4，自引：2，他引：2
Greenschist facies schist which hosts the Macraes Mine in East Otago, New Zealand has been pervasively altered by post-metamorphic
(lower greenschist facies) fluids over a 120 m thick section perpendicular to foliation. Metamorphic titanite has been replaced
by rutile, and epidote has been replaced by a variety of metamorphic minerals including siderite, chlorite, muscovite and
calcite. The early stages of this alteration occurred during development of a ductile cleavage associated with kilometre scale
recumbent folding. The cleavage was widely overprinted by a subparallel set of spaced (mm scale) microshears which are locally
enriched in rutile and hydrothermal graphite. Strain was then concentrated into narrow (m scale) zones where more intensely
deformed portions of the rock are crossed and highly disrupted by closely spaced (100 μm scale) microshears. The highly strained
rocks show a combination of mylonitic and cataclastic microstructures, including crystal-plastic grain size reduction and
recrystallization of micas to form a new foliation. Muscovite has grown at the expense of albite in the mylonitic cataclasites.
Hydrothermal alteration was accompanied by addition of pyrite, arsenopyrite and gold without development of quartz veins.
Gold precipitated with sulphides during reduction of the fluid by hydrothermal graphite. The whole altered rock sequence was
later cut sporadically by mesothermal quartz veins which contain gold, scheelite, rutile, pyrite and arsenopyrite. This deposit
displays a continuum of post-metamorphic processes and hydrothermal fluid flow which occurred during uplift of the schist
belt.
Received: 4 December 1997 / Accepted: 21 September 1998 相似文献
6.
卢秋霞 《大地构造与成矿学》2000,24(1):75-80
应用阴极发光技术研究了微细浸染型金矿中赋矿围岩和矿石中硅质以及成矿期和表生期石英脉的阴极发光特征。结果表明 :围岩(包括石英斑岩和辉绿岩墙)中的硅质和石英及次生硅化石英均表现不同的发光特征 ,而与原生矿化有关的原生硅化石英不发光 ;其中 ,氧化矿石中的硅化石英和表生梳状石英脉在阴极发光下呈棕色 ,与赋矿围岩中碎屑石英的次生溶解加大边表现的发光特征一致。这表明氧化和表生石英的硅质来源与溶解围岩和改造原生矿石有关 ,而原生硅化石英的硅质来源与围岩(包括岩浆岩)无关 ,进而表明成矿物质并非围岩提供。结合其它方面的系列研究 ,为该类型金矿属深源流体成矿作用产物的新观点 ,即成矿物质和流体可能直接来源于深部或上地幔提供了进一步的证据。这表明 ,阴极发光技术是一种简便、可靠和实用的矿床成因研究手段。 相似文献
7.
Quartz‐rich veins in metapelitic schists of the Sanandaj‐Sirjan belt, Hamadan region, Iran, commonly contain two Al2SiO5 polymorphs, and, more rarely, three coexisting Al2SiO5 polymorphs. In most andalusite and sillimanite schists, the types of polymorphs in veins correlate with Al2SiO5 polymorph(s) in the host rocks, although vein polymorphs are texturally and compositionally distinct from those in adjacent host rocks; e.g. vein andalusite is enriched in Fe2O3 relative to host rock andalusite. Low‐grade rocks contain andalusite + quartz veins, medium‐grade rocks contain andalusite + sillimanite + quartz ± plagioclase veins, and high‐grade rocks contain sillimanite + quartz + plagioclase veins/leucosomes. Although most andalusite and sillimanite‐bearing veins occur in host rocks that also contain Al2SiO5, kyanite‐quartz veins crosscut rocks that lack Al2SiO5 (e.g. staurolite schist, granite). A quartz vein containing andalusite + kyanite + sillimanite + staurolite + muscovite occurs in andalusite–sillimanite host rocks. Textural relationships in this vein indicate the crystallization sequence andalusite to kyanite to sillimanite. This crystallization sequence conflicts with the observation that kyanite‐quartz veins post‐date andalusite–sillimanite veins and at least one intrusive phase of a granite that produced a low‐pressure–high‐temperature contact aureole; these relationships imply a sequence of andalusite to sillimanite to kyanite. Varying crystallization sequences for rocks in a largely coherent metamorphic belt can be explained by P–T paths of different rocks passing near (slightly above, slightly below) the Al2SiO5 triple point, and by overprinting of multiple metamorphic events in a terrane that evolved from a continental arc to a collisional orogen. 相似文献
8.
The Klondike Schist that forms the basement rocks for the famous Klondike placer goldfield was emplaced as km-scale thrust
slices in Early Jurassic time, along with some thin (10 to 30 m-scale) slices of greenstone and ultramafic rocks. Permian
metamorphic fabrics in the schists were deformed during thrust emplacement by structures formed as the rocks passed through
the brittle–ductile transition. Early-formed thrust-related structures were almost-pervasive recumbent folds that affected
both the schist and greenstone/ultramafic slices and imposed a spaced cleavage with minor recrystallisation of micas. These
structures gave way to shallow-dipping phacoidal cleavage near (within <100 m of) thrust structures. Thrust-related structures
have been overprinted locally by well-defined steeply dipping reverse fault-fold zones, and associated upright folding on
regional (km) to mesoscopic (m) scales. The fold-fault zones occur as two orthogonal sets of structures oriented NW to N and
NE to E. Some of these steeply dipping fault zones have been reactivated by Late Cretaceous normal faulting. Orogenic (mesothermal)
gold-bearing veins were emplaced in local sites of extension during or after formation of the compressional fault-fold zones
and before normal fault reactivation. Over 400 veins (m to cm-scale) observed in this study imply a general NW strike for
mineralised structures (W to N), but with a broad scatter of orientations. Vein emplacement was controlled principally by
fold axial surfaces of kink folds of the fault-fold generation. However, some other local extension sites have opened along
preexisting structures to host veins locally, including metamorphic foliation and spaced cleavage planes. In addition, irregular
extensional fractures with no obvious structural control host some veins. The Klondike mineralised veins formed as swarms
with broad regional structural control, but represent relatively diffuse mineralised zones, with numerous scattered small
veins, compared to most orogenic vein systems. These diffuse vein swarms appear to be sufficient sources for the rich and
geographically localised placer gold deposits that formed in overlying gravels during erosion of the Klondike Schist basement. 相似文献
9.
河南方城柏树岗金红石矿床含矿岩系主要由角闪(片)岩、变粒岩、斜长片岩、石英(片)岩及云母片岩组成、前者是主要含矿岩石。分为石英(片)岩、角闪(片)岩-云母斜长片岩、云母片岩-石英(片)岩三个岩性段,二段是主要含矿岩段。原岩为一套火山岩、正常沉积岩岩性组合。经历了两次变质作用,变质温压400～485℃、200～700MPa,变质时间416.1±0.5Ma,变质热液产生了少量细脉及脉岩。含矿岩系的形成变化是板块运动的结果。基性岩及基性岩质凝灰岩是钛的主要来源,变质作用是主要成矿作用。 相似文献
10.
Silica mobility and fluid movement during metamorphism of the Connemara schists, Ireland 总被引：5，自引：1，他引：5
Quartz veins are developed in a wide range of metasediment types in the upper amphibolite facies rocks of Connemara, and attest to considerable migration of silica. Contrary to common assumptions, there is clear evidence that these veins do not primarily result from movement of fluid to regions of lower P–T down the regional geothermal gradient. Under amphibolite facies conditions, a dilute chloride fluid moving down temperature has the potential to alter 60g of plagioclase to muscovite for each gram of vein quartz precipitated, while cooling over the temperature interval from 650 to 500° C. The absence of significant metasomatic effects in the vein walls effectively precludes a simple origin from such through-flowing, externally derived fluids. The oxygen isotopic composition of matrix quartz shows considerable differences between different rock types (quartzite, pelite and marble), with a range of δ18OSMOW from c.+ 11.5% (quartzite) to + 18.5% (marble). In each rock type, vein quartz compositions closely match those of the matrix quartz. These results demonstrate the importance of local segregation processes in the formation of veins, and suggest that fluid convection cells were not developed during metamorphism on a scale larger than the individual sedimentary formations, if at all. Both oxygen isotope data and the absence of metasomatism indicate that veins form primarily by segregation of quartz from the host lithologies, with only a relatively minor component of through flow of externally derived fluid. Veins are clearly not the major pathways of metamorphic dewatering. It is proposed that abundant veins in the predominantly pelitic Ballynakill Formation formed during peak metamorphic D3 folding because the formation was embrittled by high fluid pressures but was capped by impermeable marble. Hence the pelitic formation fractured repeatedly and the pore fluid drained through the fractures to form veins, while irreversible loss through the rest of the succession was a much less important process. In the central mountains of Connemara, rather pure, unreactive quartzites are cut by widely spaced, laterally extensive quartz veins that are axial planar to D3 folds. These veins may mark pathways whereby metamorphic fluid made its way through the massive impermeable quartzite from lower parts of the nappe pile, but here too, oxygen isotope data indicate considerable segregation of locally derived quartz, reflecting the importance of pumping of fluid between wail rocks and fractures relative to the component of through flow. 相似文献
11.
弓长岭鞍山群呈北西至南东方向分布，位于中朝陆块东端，该群各类型岩石构成华北陆块古老的变质结晶基底。文中详细地记述了岩浆岩及混合岩、硅质板岩和长英质变粒岩、交超基性岩、交基性火山岩、变泥质岩、铁矿床、变辉长辉绿岩岩墙群的岩石特征和产出特征及成岩时代。本区为低压区域浅变质类型，演化与成岩时代约在太古代的中、晚期(3400～2500Ma)。 相似文献
12.
陕南秦巴山区是我国重要的金矿产区,尤其是安康西北部的羊坪湾-流芳金成矿带更是秦巴山区的典型代表,硝璜洞金矿就位于这一成矿带上.硝璜洞金矿产于志留纪大贵坪组第一岩性段的含炭质云英片岩夹薄层炭质石英岩内,显示岩性对金矿化的制约.矿体严格受韧性剪切带控制,主要赋存于与主剪切带呈“入”字形相交的次级韧性断裂带中.矿体呈似层状、透镜状、脉状产出.金矿物以自然金形式赋存,自然金粒度呈粗粒、巨粒.野外可识别出3期硅化蚀变,金矿化与第1期蚀变关系密切.矿床成因为韧性剪切带控制的变质热液型金矿床. 相似文献
13.
辽西兴城—台里地区发育系列花岗质岩石,强烈构造变形特征均显示其具有韧性剪切带的特点。对剪切带北段进行详细宏微观构造解析,结合岩石变形强度差异性分析、有限应变测量、石英C轴EBSD测试以及古差异应力值估算等研究,结果表明剪切带内花岗质片麻岩和眼球状花岗质片麻岩具有NEE向左行剪切变形特征,变形岩石为S-L构造岩,应变类型属于平面应变,古差异应力值介于30~40 MPa之间。长石-石英矿物温度计以及石英C轴EBSD组构指示剪切带以中低温变形为主,温度在400℃~500℃,属绿片岩相变质,具中-低温韧性剪切带特征。韧性剪切带内普遍存在变形分解现象,弱变形带内岩石残斑含量较高,眼球状构造和S-C组构较为发育;强变形带岩石残斑含量较低,剪切面理较为发育,糜棱面理发育较弱或者不发育。 相似文献
14.
The Priest pluton contact aureole in the Manzano Mountains, central New Mexico preserves evidence for upper amphibolite contact metamorphism and localized retrograde hydrothermal alteration associated with intrusion of the 1.42 Ga Priest pluton. Quartz–garnet and quartz–sillimanite oxygen isotope fractionations in pelitic schist document an increase in the temperatures of metamorphism from 540 °C, at a distance of 1 km from the pluton, to 690 °C at the contact with the pluton. Comparison of calculated temperature estimates with one‐dimensional thermal modelling suggests that background temperatures between 300 and 350 °C existed at the time of intrusion of the Priest pluton. Fibrolite is found within 300 m of the Priest pluton in pelitic and aluminous schist metamorphosed at temperatures >580 °C. Coexisting fibrolite and garnet in pelitic schist are in oxygen isotope equilibrium, suggesting these minerals were stable reaction products during peak metamorphism. The fibrolite‐in isograd is coincident with the staurolite‐out isograd in pelitic schist, and K‐feldspar is not observed with the first occurrence of fibrolite. This suggests that the breakdown of staurolite and not the second sillimanite reaction controls fibrolite growth in staurolite‐bearing pelitic schist. Muscovite‐rich aluminous schist locally preserves the Al2SiO5 polymorph triple‐point assemblage – kyanite, andalusite and fibrolite. Andalusite and fibrolite, but not kyanite, are in isotopic equilibrium in the aluminous schist. Co‐nucleation of fibrolite and andalusite at 580 °C in the presence of muscovite and absence of K‐feldspar suggests that univariant growth of andalusite and fibrolite occurred. Kyanite growth occurred during an earlier regional metamorphic event at a temperature nearly 80 °C lower than andalusite and fibrolite growth. Quartz–muscovite fractionations in hydrothermally altered pelitic schist and quartzite are small or negative, suggesting that late isotopic exchange between externally derived fluids and muscovite, but not quartz, occurred after peak contact metamorphism and that hydrothermal alteration in pelitic schist and quartzite occurred below the closure temperature of oxygen self diffusion in quartz (<500 °C). 相似文献
15.
羌塘中部高压变质带的退变质作用及其构造侵位 总被引：6，自引：1，他引：5
羌塘中部的高压变质带主要由榴辉岩、石榴石白云母片岩和蓝片岩等组成,它们在遭受高压变质作用之后折返,构造侵位于晚古生代展金组地层中,二者以韧性变形带为接触边界.本文以高压变质带中的榴辉岩和韧性变形带为研究对象,讨论了高压变质带折返过程中的退变质作用特征及折返时代.研究表明,榴辉岩在高峰期变质作用之后的折返过程中经历了由榴辉岩相→蓝片岩相→绿帘角闪岩相的退变质作用演化过程;在高压变质带构造侵位过程形成的韧性变形带中,白云母石英片岩的白云母40Ar-39Ar坪年龄为219±2Ma.高压变质带在219Ma左右构造侵位于展金组地层中,并于214Ma之前最终抬升出露地表. 相似文献
16.
当糜棱岩中金元素的含量足以满足工业利用,即在糜棱岩中可圈出独立的金矿体时,这种金矿床便可称为糜棱岩型金矿床.糜棱岩型金矿床是"中国金矿床工业类型"中的重要类型之一.此类金矿床多分布在古老地块周边长期活动的构造带之中.介绍了糜棱岩型金矿床的赋矿岩系、控矿构造、矿床、矿体、矿石以及含金矿物等地质特征.同时,对金成矿地质环境及矿床成因等作了探讨 相似文献
17.
Here we discuss the post-metamorphic metasomatism of high-grade orthogneisses by studying granite-looking, pink-coloured microcline-bearing rocks exposed around Ambagaspitiya, Sri Lanka. These rocks are medium- to coarse-grained, and are more or less homogeneous, and isotropic. Textural, and petrographic analyses clearly show that these special rocks are neither deformed nor metamorphosed, and that they are not any kind of intrusive rocks. The present study shows that these rocks have formed through K-metasomatism of once intensely deformed, and metamorphosed granodiorite, tonalite, monzodiorite, and quartz monzodiorite. The modal compositions of most of these metasomatic rocks of Ambagaspitiya are very similar to those of syenite, quartz syenite, monzonite, quartz monzonite, and quartz monzodiorite.All the original metamorphic rocks — namely granitic gneiss, metagranite, metagranodiorite, metatonalite, metamonzodiorite, metaquartz monzodiorite, metadiorite, basic dikes, and metapelites — had undergone at least five ductile deformations, D1 to D5, and had been metamorphosed under upper amphibolite to granulite facies conditions prior to the metasomatism. Almost all the parent metamorphic rocks had acquired a well-developed gneissic foliation (S2), and had suffered at least two intense folding events (F3, and F5) before the metasomatism occurred. All the metamorphic, and deformational fabrics of affected metamorphic rocks have been completely or partially obliterated by the metasomatism. This indicates that the metasomatic process post-dates all ductile deformations (D1 — D5), and the regional metamorphism. Of the parent metamorphic rocks, metagranodiorite, metatonalite, metamonzodiorite, and metaquartz monzodiorite have undergone intense metasomatism. It is shown that the metasomatism has nucleated along late-stage, post-D5 shear zones, which may form an interconnected network. Potassium-bearing metasomatic fluids, derived from a deep-seated K-rich source, may have migrated along these shear zones. The fluids which entered the shear zones have pervaded the orthogneisses through foliation planes, and along grain boundaries, and microcracks in minerals, transforming the host gneisses to metasomatic rocks. The main metasomatic transformation has taken place through the replacement of metamorphic plagioclase, and plagioclase-quartz by microcline, and through formation of myrmekite. Further studies are necessary to unravel the nature, composition, and the source of these late-stage K-rich fluids in the lower crust. 相似文献
18.
Microstructural analysis and microthermometry are useful methods for determining the deformation evolution. To address this issue, rheological behavior of quartz, feldspar and calcite in veins and host rocks during deformation, are presented in the mylonite zone of the dextral reverse Zamanabad Shear Zone (ZSZ), in northern part of Sistan Suture Zone (SSZ), in east of Iran. Microstructure evidences revealed two evolution stages of high and low temperature deformation. Quartz microstructures in the ZSZ show abundant evidences for early high-temperature plastic deformation (e.g. Bulging recrystallization (BLG)) which are as microstructures with SW directed ductile shearing in the central parts of the ZSZ. This shear zone shows progressively decreasing strain away from the central of shear zone toward the wall. High-temperature microstructures are overprinted partly or completely during shearing by the later low-temperature deformation (e.g. Pressure solution, fractures, veinlets). Microstructural observations of veins (quartz and calcite) confirms the results of microstructures in the host rock, as quartz veins occurred from peak metamorphic conditions (<400°C) and then in lower P–T conditions have been formed calcite veins (~250°C). According to microthermometric studies, two primary fluid groups are observed in quartz veins: (1) fluids trapped during peak deformation conditions, with higher-salinity, They were initially trapped at ~300–400°C, (2) smaller fluids by trapping of low-salinity inclusions at ~240–180°C that related to subsequent phases of shear zone exhumation in lower deep. Microthermometry results and microstructural analysis indicate deformation under lower greenschist facies conditions for the ZSZ, and then exhumation of the early of high-temperature rocks within regime of ductile-brittle transition to brittle. 相似文献
19.
云南双龙含铜斑岩的岩石学特征及其找矿前景 总被引：1，自引：0，他引：1
云南双龙含铜斑岩产于澜沧江深大断裂东侧,处于中国西南部新生代斑岩铜矿成矿带南段,赋矿岩体为强烈蚀变的石英闪长斑岩,围岩地层为白垩系红层。双龙含铜斑岩体已强烈水白云母化、伊利石化和硅化。矿化与硅化、绿泥石化有关。预测斑岩体下部硅化绢云母化带具有较好的成矿前景。 相似文献