首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Chlorite peridotites from Almklovdalen in southwest Norway were studied to understand the deformation processes and seismic anisotropy in the upper mantle. The lattice preferred orientation (LPO) of olivine and chlorite was determined using electron backscattered diffraction (EBSD)/scanning electron microscopy. A sample with abundant garnet showed [100] axes of olivine aligned sub-parallel to lineation, and [010] axes aligned subnormal to foliation: A-type LPO. Samples rich in chlorite showed different olivine LPOs. Two samples showed [001] axes aligned sub-parallel to lineation, and [010] axes aligned subnormal to foliation: B-type LPO. Two other samples showed [100] axes aligned sub-parallel to lineation, and [001] axes aligned subnormal to foliation: E-type LPO. Chlorite showed a strong LPO characterized by [001] axes aligned subnormal to foliation with a weak girdle subnormal to lineation. Fourier transform infrared (FTIR) spectroscopy of the specimens revealed that the olivines with A-type LPO contain a small amount (170 ppm H/Si) of water. In contrast, the olivines with B-type LPOs contain a large amount (340 ppm H/Si) of water.

The seismic anisotropy of the olivine and chlorite was calculated. Olivine showed Vp anisotropy of up to 3.8% and a maximum Vs anisotropy of up to 2.7%. However, the chlorite showed a much stronger Vp anisotropy, up to 21.1%, and a maximum Vs anisotropy of up to 31.7%. A sample with a mixture of 25% of olivine and 75% of chlorite can produce a Vp anisotropy of 14.2% and a maximum Vs anisotropy of 22.9%. Because chlorite has a wide stability field at high pressure and high temperature in the subduction zone, the strong LPO of chlorite can be a source of the observed trench-normal or trench-parallel seismic anisotropy in the mantle wedge as well as in subducting slabs depending on the dipping angle of slab in a subduction zone where chlorite is stable.  相似文献   

2.
To understand the deformation mechanism and seismic anisotropy in the uppermost mantle beneath Spitsbergen, Svalbard, in the Arctic, the deformation microstructures of olivine in the peridotite of Spitsbergen were studied. Seismic anisotropy in the upper mantle can be explained mainly by the lattice-preferred orientation (LPO) of olivine. The LPOs of the olivine in the peridotites were determined using electron backscattered diffraction patterns. Eight specimens out of 10 showed that the [100] axis of the olivine was aligned subparallel to the lineation and that the (010) plane was subparallel to the foliation, showing a type A LPO. In the other two specimens the [100] axis of olivine was aligned subparallel to the lineation and both the [010] and [001] axes were distributed in a girdle nearly perpendicular to the lineation, showing a type D LPO. The dislocation density of the olivine in the samples showing a type D LPO was higher than that in the samples showing a type A LPO. The result of an Fourier transformation infrared study showed that both the types A and D samples were dry. These observations were in good agreement with a previous experimental study ( Tectonophysics , 421 , 2006, 1 ): samples showing a type D LPO for olivine were observed at a high stress condition and samples showing both types A and D LPO were deformed under dry condition. Observations of both strong LPOs and dislocations of olivine indicate that the peridotites studied were deformed by dislocation creep. The seismic anisotropy calculated from the LPOs of the olivine could be used to explain the seismic anisotropy of P - and S -waves in the lithospheric mantle beneath Spitsbergen, Svalbard.  相似文献   

3.
ABSTRACT

Strong seismic anisotropy is observed in many subduction zones. This effect is attributed partly to subducting oceanic crust that is transformed into blueschist facies rocks. Because blueschist facies constituents such as glaucophane, epidote, and phengite show strong anisotropic elasticity, seismic anisotropy in subducting oceanic crust can be attributed to the lattice preferred orientation (LPO) of these minerals. We studied the deformation fabrics and seismic properties of phengite-rich epidote–glaucophane schists from the Franciscan Complex of Ring Mountain, California. The samples are composed mainly of glaucophane, epidote, and phengite. Some samples contain abundant phengite, the maximum being 40%. The LPOs of glaucophane showed that the [001] axes are aligned subparallel to lineation, and both (110) poles and [100] axes are aligned subnormal to foliation. The epidote [001] axes are aligned subnormal to foliation, with both (110) and (010) poles aligned subparallel to lineation. The LPOs of phengite are characterized by the maxima of [001] axes subnormal to foliation, and both (110) and (010) poles and [100] axes are aligned in a girdle subparallel to foliation. The phengite showed substantially strong seismic anisotropy (AVP = 42%, max.AVS = 37%). The glaucophane schist with abundant phengite showed significantly stronger seismic anisotropy (AVP = 30%, max.AVS = 23%) than the epidote–glaucophane schist (AVP = 13%, max.AVS = 9%). When the subduction angle of phengite-rich glaucophane schist is considered, the polarization direction of the fast S-waves for vertically propagating S-waves changed to a nearly trench-parallel direction for the subduction angle of 45?60°, and the S-wave anisotropy became stronger for vertically propagating S-waves with increasing subduction angles. Our data showed that phengite-rich blueschist facies rock can therefore contribute to the strong trench-parallel seismic anisotropy occurring at the subducting oceanic crust and at the slab–mantle interface in many subduction zones.  相似文献   

4.
大别山碧溪岭和山东荣成分别发育壳源和幔源的石榴二辉橄榄岩。它们在扬子板块向华北板块的俯冲过程中与俯冲板片一起经历了超高压变质作用。这两种原岩来源不同的石榴橄榄岩中的橄榄石具有相似的结晶学优选方位(LPO):[100]轴主板密垂直于面理面,[010]轴主极密平行于线理,这种橄榄石结晶学优选方位明显不同于高温地幔橄榄岩包体中的橄榄石组构,也不同于最近在超高压变质地体中发现的水导致的橄榄石组构。我们认为碧溪岭和荣成石榴二辉橄榄岩中的这种橄榄石组构可能是在相对较干的超高压变质条件下形成的。本研究为大陆深俯冲超高压变质石榴橄榄岩橄榄石组构特征提供了第一手资料。  相似文献   

5.
Automated electron backscattered diffraction (EBSD) was applied using a scanning electron microscope to obtain lattice preferred orientation (LPO) data for olivine in garnet peridotites of the Central Alps. As a reference frame, the LPOs of enstatite were also investigated. In the garnet peridotite at Cima di Gagnone (CDG), a weak foliation carrying a distinct lineation is present. The lineation is characterized by elongated enstatite, olivine and poikiloblastic garnet. Olivine shows a very unusual LPO with [100] normal to foliation and [001] parallel to lineation. Achsenverteilungsanalyse (AVA) maps demonstrate that [001] of olivine grains corresponds quite well to their maximum length axes which are preferentially parallel to the lineation. Numerous planar hydrous defects within (001) planes of olivine are marked by palisades of ilmenite rods and show a preferred orientation normal to lineation. Calculated P-wave velocities for CDG are fastest (8.32 km sу) normal to foliation with a relatively low anisotropy (2.9%). Compared to mantle peridotites with the usual (010)[100] LPO where the fastest Vp direction is towards the lineation, the relationship between flow geometry and seismic anisotropy is significantly different at CDG. Several mechanisms for the formation of the LPO type at CDG are considered, with glide possible on (100)[001] of olivine. On the basis of field data as well as petrographic and petrologic evidence, it has been demonstrated that the CDG garnet peridotite formed by prograde metamorphism from a hydrous protolith at pressures and temperatures of about 3.0 GPa and 750 °C, respectively. The CDG LPO is interpreted to have formed during hydrous subduction zone metamorphism. The same interpretation may hold for the previously investigated olivine LPO at Alpe Arami, which is similar to that at the nearby CDG. The observed anomalous LPO is no proof for ultradeep (>3.0 GPa) conditions.  相似文献   

6.
上地幔地震的各向异性主要归因于橄榄石的优选方位,不同的橄榄石优选方位模式可以作为上地幔不同动力学作用的指示剂。不同应力和含水量条件下的高温变形实验已经确定出五类橄榄石组构模式(“A”型、“B”型、“C”型、“D”型和“E”型)。本文运用电子背散射(EBSD)技术对来自苏鲁超高压变质带南部的芝麻房石榴石橄榄岩的橄榄石进行了优选方位测定,不同变形程度的橄榄石均显示了[100]轴近垂直于面理和[001]轴近平行于线理的特征,为“C”类组构模式,可见组构类型与变形程度没有关系,并且橄榄石组构所显示的NW向SE的剪切指向,与围岩-正、副片麻岩中形成于折返过程的石英优选方位所显示的SE向NW的剪切指向完全不同,说明芝麻房石榴石橄榄岩中橄榄石的“C”类组构是折返前形成的。结合橄榄石结构水的测量和已有的芝麻房石榴石橄榄岩形成的温压条件,推测该组构形成于含水俯冲带中,认为芝麻房石榴石橄榄岩的原岩来自于高含水的上部地幔楔碎块,与俯冲的陆壳物质一起经历了超高压变质作用并最终折返至地表。  相似文献   

7.
We report a new observation of the olivine B-type lattice-preferred orientation (LPO), from the garnet peridotite at Cima di Gagnone, Switzerland. The olivine B-type fabric forms at low temperatures and/or high stress in the presence of water, and is of particular interest because it may be used to explain the trench-parallel shear-wave splitting that is often observed at subduction zones. In conjunction with the olivine B-type fabric, we have found strong orthopyroxene LPO that is identical to those formed under water-free conditions. This suggests that water may not have a significant effect on orthopyroxene fabric. From the olivine microstructure, we determine that a stress of 22 ± 8 MPa was applied during the deformation event that formed the olivine LPO. Using an olivine flow-law, and assuming geological strain-rates, we determine the temperature of deformation to be 800 ± 175°C. This does not preclude an ultra-deep origin for the ultramafic rocks at Cima di Gagnone, but indicates that much of the deformation recorded in the microstructure occurred at modest temperatures.Communicated by T.L. Grove  相似文献   

8.
Lattice-preferred orientations (LPO) of olivine, diopside, enstatite and garnet from the Zhimafang garnet peridotite body in the Sulu ultrahigh-pressure (UHP) metamorphic terrane (China) were measured using the electron backscatter diffraction (EBSD) technique. The peridotite was captured from a mantle wedge immediately adjacent the subducted Yangtze slab and then experienced the UHP metamorphism at 750–950 °C and 4–7 GPa. The olivine LPO is characterized by the [001] axis close to the stretching lineation and the (100) plane subparallel to the foliation, indicating the prevailing of (100) [001] slip. Enstatite LPO displays the dominance of (100) [001] slip. Diopside developed complex LPO patterns that are difficult to explain using a single slip system of (100) [001]. Garnet is almost randomly oriented due to its low volume fractions, cubic symmetry and the presence of numerous slip systems. Calculated seismic properties of the peridotite yield a maximum P-wave velocity normal to the foliation and a minimum along the foliation, with anisotropy up to 8% in strongly sheared samples. The S-wave velocity pattern is complex but the fast polarization plane generally normal to the foliation. The inferred shear sense from the olivine LPO is top-to-SE, in contrary to exhumation-induced top-to-NW thrusting recorded in the quartz LPO, implying that the olivine LPO formed at early UHP metamorphic conditions. The olivine crystals have relatively low water contents (141–475 H/106 Si), indicating a fluid-deficient environment for the LPO formation. The present study suggests that a combination of low temperature and UHP plays a much more important role than the water content to promote the activation of (100) [001] slip in olivine.  相似文献   

9.
中国大陆科学钻探主孔位于苏鲁超高压带南部的东海县毛北榴辉岩体之上。主孔0-600米深度的榴辉岩的塑性变形以具中等倾角的东倾面理,近南北向的水平拉伸线理、“A”型剪切褶皱和一系列平行面理的微型韧性剪切带为特征。使用电子背散射（EBSD）技术测量的主孔7个榴辉岩样品的石榴石和绿辉石的晶格优选定向（LPO）表明：石榴石基本上无序排列,而绿辉石表现出强烈的LPO。绿辉石的[001]轴近平行于拉伸线理方向,（010）面的法线和[100]轴垂直面理分布,{110}的法线形成垂直面理的环带,反映绿辉石的位错蠕变由[001]（100）和1／2〈^-110〉滑移系控制,其不对称的LPO指示了由北向南的剪切指向。根据单斜辉石的高温实验结果,毛北榴辉岩经历了800-900℃的超高压变质作用。通过构造重塑,揭示毛北榴辉岩体为剪切流变褶皱,形成于扬子板块深俯冲时的超高压变质过程。因此榴辉岩中保留的早期岩石组构特征可以为板块的深俯冲运动学和俯冲极性提供重要信息。  相似文献   

10.
The Limo harzburgites constitute a hm-thick tectonic stack where extremely elongated meter-scale sheath folds occur, bearing axes parallel to the macroscopic lineation recognized across the whole complex. They can be identified as close to L-type tectonites, with a weak foliation, a well-developed stretching, and a mineral lineation defined by the mineral assemblage in equilibrium. The linear fabric is recognizable at every scale, from aerial photos to the crystallographic orientation of the harzburgite-forming minerals measured by means of the electron back-scatter diffraction technique. These rocks registered initial deformation under high-temperature and low water fugacity conditions at low stress levels in an anhydrous mantle wedge context, as it is inferred from the activity of the [100](010) slip system in olivine. Then, the ongoing eo-Variscan subduction incorporated fluid/melts from the subducting plate into the suprasubduction mantle wedge zone. The variation in the ambient physicochemical conditions led to the operation of the [001](010) slip system in olivine, indicative of lower temperature and higher water fugacity and stress levels. These changes are recorded, too, by synkinematic recrystallization of oriented chlorite. The L-type fabric of clinopyroxene points to constriction conditions during deformation. The active deformational processes continued along the subduction conduit with the thrust of the peridotites onto the high-pressure granulites of the Bacariza Formation. Posteriorly, the whole ensemble would have shared a common deformational history related to exhumation and initial amphibolitization. Subsequent deformation processes under greenschist facies conditions took place until effective continental collision during the Early Carboniferous gave rise to the Variscan orogen.  相似文献   

11.
We have measured P- and S-wave velocities on two amphibolite and two gneiss samples from the Kola superdeep borehole as a function of pressure (up to 600 MPa) and temperature (up to 600 °C). The velocity measurements include compressional (Vp) and shear wave velocities (Vs1, Vs2) propagating in three orthogonal directions which were in general not parallel to inherent rock symmetry axes or planes. The measurements are accompanied by 3D-velocities calculations based on lattice preferred orientation (LPO) obtained by TOF (Time Of Flight) neutron diffraction analysis which allows the investigation of bulk volumes up to several cubic centimetres due to the high penetration depth of neutrons. The LPO-based numerical velocity calculations give important information on the different contribution of the various rock-forming minerals to bulk elastic anisotropy and on the relations of seismic anisotropy, shear wave splitting, and shear wave polarization to the structural reference frame (foliation and lineation). Comparison with measured velocities obtained for the three propagation directions that were not in accordance with the structural frame of the rocks (foliation and lineation) demonstrate that for shear waves propagating through anisotropic rocks the vibration directions are as important as the propagation directions. The study demonstrates that proper measurement of shear wave splitting by means of two orthogonal polarized sending and receiving shear wave transducers is only possible when their propagation and polarization directions are parallel and normal to foliation and lineation, respectively.  相似文献   

12.
Effect of water and stress on the lattice-preferred orientation of olivine   总被引：6，自引：1，他引：5  
The influence of water and stress on the lattice-preferred orientation (LPO) of olivine aggregates was investigated through large strain, shear deformation experiments at high pressures and temperatures (P = 0.5–2.1 GPa, T = 1470–1570 K) under both water-poor and water-rich conditions. The specimens are hot-pressed synthetic olivine aggregates or single crystals of olivine. Water was supplied to the sample by decomposition of a mixture of talc and brucite. Deformation experiments were conducted up to γ (shear strain)  6 using the Griggs apparatus where water fugacity was up to  13 GPa at the pressure of 2 GPa. The water content in olivine saturated with water increases with increasing pressure and the solubility of water in olivine at P = 0.5–2 GPa was  400–1200 ppm H/Si. Several new types of LPO in olivine are found depending on water content and stress. Samples deformed in water-poor conditions show a conventional LPO of olivine where the olivine [100] axis is subparallel to the shear direction, the (010) plane subparallel to the shear plane (type-A). However, we identified three new types (type-B, C, and E) of LPO of olivine depending on the water content and stress. The type-B LPO of olivine which was found at relatively high stress and/or under moderate to high water content conditions is characterized by the olivine [001] axis subparallel to the shear direction, the (010) plane subparallel to the shear plane. The type-C LPO which was found at low stress and under water-rich conditions is characterized by the olivine [001] axis subparallel to the shear direction, the (100) plane subparallel to the shear plane. The type-E LPO which was found under low stress and moderate water content is characterized by the olivine [100] axis subparallel to the shear direction, the (001) plane subparallel to the shear plane. Observations by transmission electron microscopy (TEM) and scanning electron microscopy (SEM) show that the dislocations in water-poor samples (type-A) are curved and both b =  [100] and b = [001] dislocations have a similar population. Numerous subgrains are seen in water-poor samples in backscattered electron images. In contrast, water-rich samples (both type-B and type-C) contain mostly b = [001] dislocations and dislocations are straight and sub-grain boundaries are rare compared to those in water-poor samples. These observations suggest that (1) dominant slip systems in olivine change with water fugacity (and stress) and (2) grain boundary migration is enhanced in the presence of water. Seismic anisotropy corresponding to the fabrics under water-rich condition is significantly different from that under water-poor condition. Consequently, the relationship between seismic anisotropy and flow geometry in water-rich regions is expected to be different from that in water-poor regions in which type-A fabric dominates (i.e., the lithosphere). A few cases are discussed including anisotropy in the subduction zone and in the deep upper mantle.  相似文献   

13.
The 5158-m-deep main borehole of the Chinese Continental Scientific Drilling Project (CCSD-MH) penetrated granitic gneisses, paragneisses, eclogites, retrograde eclogites, amphibolites and ultramafic rocks in the Sulu ultrahigh-pressure (UHP) metamorphic terrane, eastern China. The CCSD-MH consists of four petro-structural units separated by three SE-dipping ductile shear zones DFa (835-1280 m), DFb (2010-2280 m) and DFc (2920-3225 m), which are correspondent with the regional shear zones in the northern Sulu UHP supracrustal zone. Using the electron backscatter diffraction (EBSD) technique, we investigated the lattice-preferred orientations (LPOs) of omphacite, diopside and quartz in core samples from the CCSD-MH. Omphacite from eclogites and diopside from garnet pyroxenites display very strong LPOs, which are characterized by the maximum concentration of [001]-axes parallel to the lineation and (010)-poles normal to the foliation. Quartz in para- and granitic mylonites/gneisses from the shear zones DFa, DFb and DFc developed multiple slip systems. 40Ar/39Ar dating of biotite in para- and granitic gneisses from the CCSD-MH yields 223-202 Ma, which constrains the formation ages of the quartz high-temperature prism slip systems {m}<a> and {m}[c]. The asymmetric LPOs of omphacite, diopside, olivine and quartz with respect to the structural frame reveal three deformation phases in the Sulu terrane. In the Middle Triassic, the northward subduction of the Yangtze plate to depths > 100 km produced a top-to-the-south shear sense in LPOs of omphacite, diopside and olivine, and a nearly N-S-striking foliation and a subhorizontal N-S-trending lineation in eclogites and ultramafic rocks. In the Late Triassic, the UHP rocks were exhumed to the lower crust and quartz developed high-temperature slip systems with a top-to-the-NW shear sense, which is consistent with the regional SE-dipping foliation and SE-plunging lineation in the ductile shear zones. In the Cretaceous the UHP rocks were exhumed to the middle crust when the migmatization and granitic intrusion formed a NE-striking antiform structure. As a result, the activation of quartz low-temperature basal slip (0001)<a> is characterized by a top-to-the-SE shear sense in the south, but a top-to-the-NW shear sense in the north.  相似文献   

14.
Garnet growth in high‐pressure, mafic garnet granulites formed by dehydration melting of hornblende‐gabbronorite protoliths in the Jijal complex (Kohistan palaeo‐island arc complex, north Pakistan) was investigated through a microstructural EBSD‐SEM and HRTEM study. Composite samples preserve a sharp transition in which the low‐pressure precursor is replaced by garnet through a millimetre‐sized reaction front. A magmatic foliation in the gabbronorite is defined by mafic‐rich layering, with an associated magmatic lineation defined by the shape‐preferred orientation (SPO) of mafic clusters composed of orthopyroxene (Opx), clinopyroxene (Cpx), amphibole (Amp) and oxides. The shape of the reaction front is convoluted and oblique to the magmatic layering. Opx, Amp and, to a lesser extent, Cpx show a strong lattice‐preferred orientation (LPO) characterized by an alignment of [001] axes parallel to the magmatic lineation in the precursor hornblende‐gabbronorite. Product garnet (Grt) also displays a strong LPO. Two of the four 〈111〉 axes are within the magmatic foliation plane and the density maximum is subparallel to the precursor magmatic lineation. The crystallographic relationship 〈111〉Grt // [001]Opx,Cpx,Amp deduced from the LPO was confirmed by TEM observations. The sharp and discontinuous modal and compositional variations observed at the reaction front attest to the kinetic inhibition of prograde solid‐state reactions predicted by equilibrium‐phase diagrams. The P–T field for the equilibration of Jijal garnet granulites shows that the reaction affinities are 5–10 kJ mol.?1 for the Grt‐in reaction and 0–5 kJ mol.?1 for the Opx‐out reaction. Petrographic and textural observations indicate that garnet first nucleated on amphibole at the rims of mafic clusters; this topotactic replacement resulted in a strong LPO of garnet. Once the amphibole was consumed in the reaction, the parallelism of [001] axes of the mafic‐phase reactants favoured the growth of garnet crystals with similar orientations over a pyroxene substrate. These aggregates eventually sintered into single‐crystal garnet. In the absence of deformation, the orientation of mafic precursor phases conditioned the nucleation site and the crystallographic orientation of garnet because of topotaxial transformation reactions and homoepitaxial growth of garnet during the formation of high‐pressure, mafic garnet‐granulite after low‐pressure mafic protoliths.  相似文献   

15.
韦博  金振民  章军锋 《地球科学》2013,38(5):983-994
对超高压变质带中橄榄岩变形显微构造的研究, 有助于了解板块边界构造环境中地幔物质的流变性质和变形机制, 进而探讨其在深俯冲/折返过程中的地球动力学过程的作用.采用光学显微镜、电子探针、红外光谱、电子背散射衍射(EBSD)、位错氧化缀饰等多种方法系统研究了来自中国大别碧溪岭的石榴异剥橄榄岩中的变形显微构造.研究结果表明: (1)碧溪岭石榴异剥橄榄岩发育较好的形状优选方位, 但只有单斜辉石显示了强晶格优选方位, 而橄榄石晶格优选方位很弱, 与常见上地幔橄榄岩中单斜辉石组构弱而橄榄石组构强的特点差异显著, 反映了单斜辉石经历位错蠕变而橄榄石经历位错调节的颗粒边界滑移变形; (2)碧溪岭异剥橄榄岩中单斜辉石和橄榄石均含有一定量的结构水, 其中单斜辉石含水量124×10-6~274×10-6, 橄榄石含水量38×10-6~80×10-6, 高于常见造山带橄榄岩中各矿物的含水量, 可能反映了壳源物质混染引起的高含水量变形环境; (3)橄榄石中发育显著位错显微构造, 根据位错显微构造计算的变形差异应力为230~600 MPa, 高于正常上地幔稳态流变应力, 反映了俯冲带中的相对低温变形环境.综合分析研究表明, 超高压变质带中的高压、低温、高差异应力和高结构水含量是形成碧溪岭相对独特的橄榄石、单斜辉石变形显微构造的原因.   相似文献   

16.
Central Italy is an active tectonic area that has been recently studied by several regional mantle, Pn and SKS, studies which revealed the presence of a strong regional anisotropy. In this paper, we present the first petrophysical results on the only mantle xenoliths from Central Italy, which place new constraints on the upper mantle structures of this region. The Torre Alfina mantle xenoliths are very small in size, from few millimetres to about 1.5 cm. They are mainly dunites and harzburgites, with subordinate lherzolites and wehrlites. Since olivine and spinel are always present, they should have crystallised in the spinel-bearing lherzolite field. Their mineralogical composition is ol+spl±opx±cpx. Both olivines and pyroxenes are present as porphyroclasts and as neoblasts. The xenoliths show different degrees of recrystallization. Geothermobarometry on these xenoliths give a temperature range of 1040±40 °C and a pressure estimate of about 1.5 GPa, corresponding to 50 to 60 km depth. Previous seismic studies have estimated the Moho to be at 20 to 25 km in this region, hence the xenoliths come from a hot mantle, probably asthenospheric, below a lithosphere of about 25 to 40 km in thickness below the Moho. We measure the crystallographic preferred orientation (CPO) of olivines and pyroxenes using a SEM and the Electron Back Scattered Diffraction (EBSD) technique. The CPO shows all three axes of olivine are tightly clustered: [100] axis is typically more tightly clustered than [010] and [001] is the most widely distributed axis. The fabric strength expressed by the integral J index, varies from 4.5 to 25.9, and decreases with the degree of recrystallization. We use CPO data to calculate anisotropic seismic properties of the xenoliths. They are very homogenous and probably statistically representative of the mantle below the Torre Alfina area. Vp ranges from 8.4 to 9.1 km/s, Vs1 from 4.8 to 5.0 km/s. The seismic anisotropy is more variable; AVp ranges from 9.8% to 19.3% and AVs from 7.3% to 13.4%. The majority of the xenoliths display an orthorhombic seismic symmetry, but xenoliths with a transverse isotropic behaviour have also been observed.

We consider four geodynamic models for the source region of the xenoliths (extension, shear, upwelling, slab tilted), defined by different orientations of the structural reference frame, and we calculated for each model the variation of the seismic properties with temperature, pressure and volume fraction of orthopyroxene. After comparing this variation of calculated seismic parameters with seismic observations from the region, we form the hypothesis that the xenoliths come from either an extensional tectonic zone (lineation X and foliation plane XY horizontal) or transcurrent shear zone (lineation X horizontal and foliation plane XY vertical) and that the mantle beneath Torre Alfina is composed by 70% olivine and 30% orthopyroxene forming an anisotropic layer of about 160 or 110 km in thickness, respectively.  相似文献   


17.
The Anita Peridotite, in southwestern New Zealand, is a ∼1 × 20 km ultramafic massif that was rapidly extruded from beneath a Cretaceous arc within the 4 km wide mylonitic Anita Shear Zone. The peridotitic body contains a spectacular array of textures that preserve evidence for changing temperature, stress, and deformation mechanisms during the exhumation process. Olivine and orthopyroxene microstructures and lattice-preferred orientations (LPO) record a three-phase deformation history. Dislocation glide on the C- and E-type slip systems is recorded by coarse pre-mylonitised olivine grains, and occurred under hydrous conditions at T ∼650 °C, stress ∼200–700 MPa and strain rate ∼10−15 s−1, probably within hydrated sub-arc mantle lithosphere. Rare protomylonite pods record deformation by dislocation creep in porphyroclasts and dislocation-accommodated grain boundary sliding in the matrix on {0kl}[100] in olivine and (100)[001] in orthopyroxene, under conditions of T ∼730–770 °C, stress ∼52–700 MPa and strain rate ∼10−15 s−1. The massif, however, is dominated by mylonite and ultramylonite that wrap the protomylonite pods, comprising mostly fine-grained olivine neoblasts that lack internal distortions and have uniform LPOs. These textures indicate deformation occurred by grain-size sensitive (GSS) creep at T ∼650 °C, stress ∼69–137 MPa and strain rate ∼10−15 s−1, and thus during conditions of cooling and decreasing stress. GSS creep became more dominant with time, as the proportion of randomly-oriented neoblasts increased and formed interlinked networks that accommodated much of the strain. Grain boundary pinning allowed GSS creep to be maintained in polyphase regions, following mixing of olivine and orthopyroxene, which may have occurred by grain boundary transport in a fluid phase during a “creep cavitation” process. The results indicate that the Anita Peridotite recrystallised and underwent rheological weakening at a constant strain rate, with strain distributed across the entire section. This widespread deformation caused rapid exhumation of the peridotite from the lithospheric mantle into the overlying arc crust. The massif therefore records multiple overprinting phases of deformation under mantle and crustal conditions associated with the rapid exhumation of a large orogenic peridotite.  相似文献   

18.
We present a petrophysical analysis of upper mantle xenoliths, collected in the Quaternary alkali basalt fields (Series III and IV) from the island of Lanzarote. The samples consist of eight harzburgite and four dunite nodules, 5 to 15 cm in size, and exhibit a typical protogranular to porphyroclastic texture. An anomalous foliation resulting from strong recovery processes is observed in half of the specimens. The lattice preferred orientations (LPO) of olivine, orthopyroxene and clinopyroxene were measured using electron backscatter diffraction (EBSD). In most samples, olivine exhibits LPOs intermediate between the typical single crystal texture and the [100] fiber texture. Occasionally, the [010] fiber texture was also observed. Simultaneous occurrence of both types of fiber textures suggests the existence of more than one deformation regime, probably dominated by a simple shear component under low strain rate and moderate to high temperature. Orthopyroxene and clinopyroxene display a weaker but significant texture. The LPO data were used to calculate the seismic properties of the xenoliths at PT conditions obtained from geothermobarometry, and were compared to field geophysical data reported from the literature. The velocity of P-waves (7.9 km/s) obtained for a direction corresponding to the existing seismic transect is in good agreement with the most recent geophysical interpretation. Our results are consistent with a roughly W–E oriented fastest P-wave propagation direction in the uppermost mantle beneath the Canary Islands, and with the lithosphere structure proposed by previous authors involving a crust–mantle boundary at around 18 km in depth, overlaid by intermediate material between 11 and 18 km.  相似文献   

19.
We present an integrated study of geochemistry, petrofabrics and seismic properties of strongly sheared eclogites from the Chinese Continental Scientific Drilling (CCSD) project in the Sulu ultrahigh-pressure (UHP) metamorphic terrane, eastern China. First, geochemical data characterize diverse protoliths of the studied eclogites. The positive Eu- and Sr-anomalies, negative Nb anomaly and flat portion of heavy rare earth elements in coarse-grained rutile eclogites (samples B270 and B295) suggest a cumulate origin in the continental crust, whereas the negative Nb anomaly and enrichment of light rare earth elements in retrograde eclogites (samples B504, B15 and B19) imply an origin of continental basalts or island arc basalts. Second, P-wave velocities (Vp) of three typical eclogite samples were measured under confining pressures up to 500 MPa and temperatures to 700 °C. At 500 MPa and room temperature, the mean Vp reaches 8.50-8.53 km/s in samples B270 and B295 but drops to 7.86 km/s in sample B504, and the P-wave anisotropy changes from 1.7-2.7% to 5.5%, respectively. The pressure and temperature derivatives of Vp are larger in the retrograde eclogite than in fresh ones. Third, the electron backscatter diffraction (EBSD) measurements of the eclogites reveal random crystal preferred orientation (CPO) of garnet and pronounced CPO of omphacite, which is characterized by a strong concentration of [001]-axes sub-parallel to the lineation and of (010)-poles perpendicular to the foliation. The asymmetric CPO of omphacite in sample B270 recorded a top-to-the-south shear event during subduction of the Yangtze plate. The calculated fastest Vp is generally sub-parallel to the lineation, but a different deformation environment during exhumation could form second-order variations in omphacite CPO and affect the Vp distribution in eclogites (e.g., the fastest Vp is at ~ 35° from the foliation in sample B295). Comparison between measured and calculated seismic properties indicates that the CPO of omphacite controls the seismic anisotropy of eclogites at high pressure, and compositional layering and retrograde minerals will increase the anisotropy. Calculated P-wave velocities agree well with velocities measured at 500 MPa and room temperature for fresh eclogites, but much higher than those of retrograde eclogite. As a case study, the laboratory-derived Vp-P and Vp-T relationships were used to estimate P-wave velocities of eclogites and peridotites beneath the Western Superior Province, Canada. The results indicate that besides the fabric-induced anisotropy, the direction dependence of pressure and temperature derivatives of Vp can significantly increase seismic anisotropy of eclogites with depth, which results in eclogites being an important candidate for the seismic anisotropy in the upper mantle. Due to their very high density and velocity, garnet-rich eclogites within peridotite could be detected in seismic reflections in subduction zones.  相似文献   

20.
Shape, size and orientation measurements of quartz grains sampled along two transects that cross zones of increasing metamorphic grade in the Otago Schist, New Zealand, reveal the role of quartz in the progressive development of metamorphic foliation. Sedimentary compaction and diagenesis contributed little to the formation of a shape‐preferred orientation (SPO) within the analysed samples. Metamorphic foliation was initiated at sub‐greenschist facies conditions as part of a composite S1‐bedding structure parallel to the axial planes of tight to isoclinal F1 folds. An important component of this foliation is a pronounced quartz SPO that formed dominantly by the effect of dissolution–precipitation creep on detrital grains in association with F1 strain. With increasing grade, the following trends are evident from the SPO data: (i) a progressive increase in the aspect ratio of grains in sections parallel to lineation, and the development of blade‐shaped grains; (ii) the early development of a strong shape preferred orientation so that blade lengths define the linear aspect of the foliation (lineation) and the intermediate axes of the blades define a partial girdle about the lineation; (iii) a slight thinning and reduction in volume of grains in the one transect; and (iv) an actual increase in thickness and volume in the survivor grains of the second transect. The highest‐grade samples, within the chlorite zone of the greenschist facies, record segregation into quartz‐ and mica‐rich layers. This segregation resulted largely from F2 crenulation and marks a key change in the distribution, deformation and SPO of the quartz grains. The contribution of quartz SPO to defining the foliation lessens as the previously discrete and aligned detrital quartz grains are replaced by aggregates and layers of dynamically recrystallized quartz grains of reduced aspect ratio and reduced alignment. Pressure solution now affects the margins of quartz‐rich layers rather than individual grains. In higher‐grade samples, therefore, the rock structure is characterized increasingly by segregation layering parallel to a foliation defined predominantly by mica SPO.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号