共查询到16条相似文献，搜索用时 140 毫秒
1.
渔用高强度聚乙烯和普通聚乙烯绞捻网片的拉伸力学性能比较研究 总被引：6，自引：0，他引：6
为给深水网箱设计与渔用材料的合理选配提供依据,应用ISO1806等对渔用高强度聚乙烯绞捻网片(以下简称HSPE绞捻网片)和普通聚乙烯绞捻网片(以下简称PE绞捻网片)的拉伸力学性能进行了比较研究。结果表明,(1)在同等条件下,36股HSPE绞捻网片的网目连接点断裂强力和网片单线断裂强力分别比52股PE绞捻网片增加了3.1%,3.7%;而前者的目脚直径和网片阻力可较后者减少19.6%。(2)对网片强力进行了再现性研究,36股HSPE和52股PE绞捻网片网目连接点断裂强力的标准偏差分别为35.93N,25.61N,再现性标准偏差分别为31.07N,36.93N;网片单线断裂强力的标准偏差分别为19.91N,13.49N,再现性标准偏差分别为20.48N,15.49N;网片强力测试数据的变异系数均小于4%;表示测试结果的分散性较小。(3)36股HSPE绞捻网片成本可较52股PE绞捻网片减少38.9%,其在渔业生产中进行推广应用具有可行性。(4)GB/T4925作为一个标准,对绞捻网片来说,存在不足,建议对GB/T4925进行修订。 相似文献
2.
渔用高强度聚乙烯和普通聚乙烯单丝结构与性能的比较研究 总被引：10，自引：1，他引：9
为给渔具设计与材料的合理选配提供科学依据,通过差示扫描量热法(DSC)、广角X射线衍射(WAXD)及扫描电镜(SEM)等方法的比较,研究了渔用高强度聚乙烯(high-strength polyethylene,简称HSPE)和普通聚乙烯(PE)单丝的结构与性能。结果表明,HSPE单丝的断裂强度和结节强度比普通PE单丝分别提高了14．54％,3．05％,而断裂伸长率降低了44．44％;HSPE单丝的结晶度和声速值比普通PE单丝分别增加了6．20％和76．8％;HSPE单丝微晶尺寸稍大于普通PE单丝,而晶胞参数变化很小;HSPE单丝内部结晶形态为平行的串晶和纤维复合结构。正是由于结晶度、取向度的提高以及单丝内部生成了平行的串晶和纤维复合结构,导致了渔用HSPE单丝强度的提高。 相似文献
3.
高强度聚乙烯菱形网目经编网片的力学性能初步研究 总被引：7，自引：0，他引：7
给网箱设计与渔用材料的合理选配提供参考,初步研究了渔用高强度聚乙烯菱形网目经编网片(简称HSPE经编网片)的力学性能。研究结果表明,(1)在同等条件下,36股HSPE经编网片网目强力、网片纵向断裂强力分别比36股普通聚乙烯菱形网目经编网片(简称PE经编网片)增加了48.9%,11.6%,而前者的网片纵向断裂伸长率比后者减少了29.4%;(2)在相同网目长度条件下,36股HSPE经编网片网目强力、网片纵向断裂强力分别比42股锦纶菱形网目经编网片(简称PA经编网片)增加了27.2%,37.9%,而前者的网片纵向断裂伸长率比后者减少了33.6%;(3)36股HSPE经编网片较36股PE经编网片和42股PA经编网片具有性能价格比优势;HSPE经编网片在网箱养殖等渔业生产中推广应用上具有可行性。 相似文献
4.
5.
6.
深水系泊高强聚乙烯缆绳的蠕变及破断实验研究 总被引：1，自引：0，他引：1
相对于同一破断强度的聚酯(polyester)缆绳,高强聚乙烯(HMPE)缆绳具有更高的刚度、更小的自重和直径、更易运输和安装的优点,因此高强聚乙烯缆绳被引入到系泊系统以替代聚酯缆绳。然而高强聚乙烯缆绳又存在易发生蠕变甚至蠕变破断的不利因素,研究其蠕变和蠕变破断的力学特性就显得尤为迫切。首先设计了合成纤维缆绳实验系统,对HMPE子股缆绳开展了系统的蠕变和蠕变破断实验。基于实验数据,分析了HMPE子缆的蠕变和蠕变破断特性;通过调研HMPE试样的蠕变实验数据,提出了HMPE考虑温度和载荷影响的HMPE纱线蠕变率经验公式,采用该经验公式并结合已有的缆绳比尺换算关系,可以推算出HMPE缆绳的蠕变率;此外,基于所获得的蠕变破断实验数据,提出了HMPE缆绳在定常载荷下的蠕变寿命经验公式。这些成果对HMPE缆绳应用于深水绷紧式系泊系统具有重要意义。 相似文献
7.
聚乙烯吡咯烷酮碘对中国对虾的毒性试验 总被引：3，自引：1，他引：2
目前,对虾养殖生产中已使用PVP-I(聚乙烯吡咯烷酮碘)防治对虾病毒病,但仍借鉴防治鱼类病害的使用方法,各种产品的有效碘含量也不尽相同,使用时不易掌握。作者就该药在对虾养殖中的使用进行了较为系统的研究。本文将毒性试验结果报告如下。1 材料和方法1.1 材料聚乙烯吡咯烷酮碘为市售商品,有效碘含量18%～21.5%。对虾各期幼体及幼虾取自生产现场。试验用水为砂滤海水,经脱脂棉二次过滤后使用。1.2 方法1.2.1 急性毒性试验 试验在烧杯中进行,定量加入试验用水1000ml,水浴保持所需温度,分别加入PVP-I母液,使水中有效碘浓度达到设定浓… 相似文献
8.
9.
本文介绍了码头钢管桩潮差段底漆、底胶、聚乙烯包覆三层防腐结构的施工工艺及防腐材料的性能指标并简要介绍了防腐钢管桩的使用情况。 相似文献
10.
由于高强聚乙烯(HMPE)和聚酯(polyester)缆绳具有各自独特的材料性能,因此提出在超深水绷紧式系泊系统中,采用高强聚乙烯和聚酯组成的混合缆作为系缆。以一系泊在超深水处的FPSO为例,系缆分别采用聚酯缆绳、高强聚乙烯缆绳以及混合缆。比较了循环载荷作用下,不同绷紧式系泊系统的动力响应。分析表明,在超深水中采用混合缆能够设计出合宜刚度的系泊系统,使系泊系统既有保持海洋浮式结构物在平衡位置的能力,又有风暴载荷下良好的生存能力。较理想的混合缆构型是:在靠近海底部分,采用高强聚乙烯缆绳;而在靠近海面部分,采用聚酯缆绳。这些认识对混合缆应用于超深水绷紧式系泊系统具有重要的参考价值。 相似文献
11.
Heidi Moe Odd Sture Hopperstad Anna Olsen Østen Jensen Arne Fredheim 《Ocean Engineering》2009,36(12-13):992-1002
Creep in materials and structures may lead to increasing strains, permanent deformations, change in mechanical properties and rupture at loads significantly smaller than the breaking strength. In this paper, we present data on temporary-creep properties, recovery of strain post creep and post-creep tensile properties of a selection of Raschel knitted netting materials. Creep strain in wet netting materials subjected to a creep target load of 10–90% of average force at break for 30 min varied from 1.6% to 3.5%. The rate of creep decreased with time and decreased target load. The recovery of strain post creep was relatively fast and approximately half of the creep strain was elastic. Post-creep tensile testing showed that the length and force at break were not significantly affected by the creep load history. However, due to permanent deformations of the specimens from the creep test, the nominal breaking strain decreased and the stiffness increased with increased creep target load. 相似文献
12.
Pl LADER David W. FREDRIKSSON Jana GUENTHER Zsolt VOLENT Nina BLOCHER David KRISTIANSEN Lars GANSEL Jud DECEW 《中国海洋工程》2015,(3):369-389
The present study investigated the drag increase on aquaculture nets due to biofouling of the colonial hydroid Ectopleura larynx. It had two main parts: firstly the growth characteristics of E. larynx were investigated by use of field tests at a Norwegian aquaculture site; secondly the hydrodynamic drag on the fouled twines was studied in a towing tank by using fabricated models of net twines with artificial hydroid fouling. In the field tests, the growth of the hydroids was first measured after three weeks of immersion and then again after six weeks. During this interval, the density of hydroids and the thickness of the hydroid stem were almost constant(1.4 hydroids/mm and 0.29 mm, respectively), while the average length of the hydroids increased from 6.4 to 11.2 mm. The hydroid length followed a Rayleigh distribution, while the thickness was normal(Gaussian) distributed. Replicas of twines with three different levels of hydroid growth were made(1.5 hydroids/mm twine, hydroid length 9 mm, 16 mm and 20 mm), and the drag on these twines was measured at different towing velocities(0.1 to 1.4 m/s) and with different twine configurations. For the twine with the shortest hydroids(9 mm), the drag was from 1.5 times(Re=4000) to 2.2 times(Re=1000) the drag on a clean twine. For the longest hydroids(21 mm), the drag was 2 times and 3.8 times, respectively. 相似文献
13.
渔用合成纤维及其网线和绳索是构成渔具的基本要素，其强度性能对渔具的力学性能、渔获性能、使用寿命和制造成本具有重要作用。为了满足海洋渔业不断发展的需要，我国陆续颁布了一批国家及行业质量标准，并在实践中逐步接近ＩＳＯ标准或国际名牌产品标准，使渔具纤维材料性能有了较大的提高。本文通过对国内外渔具合成纤维材料强度性能的比较和分析，认为：（１）国产合成纤维长丝的有关性能与日本产品无显著差异；（２）国产ＰＡ胶丝性能普遍较好，并优于英国产品，而ＰＡ长丝捻线与国外产品尚有较大差距；（３）ＰＥ线产品性能普遍超过ＱＪ／ＣＮＦＣ０２９２标准，但仍低于ＳＣ１４１—８５标准要求；（４）国产ＰＡ长丝三股绳索性能与德国产品接近而高于日本产品；（５）ＰＥ和ＰＶＡ三股绳索性能仅略高于日本产品；（６）渔具新材料的研制及其在渔业中的开发应用与国外相比，尚有较大差距，应得到足够重视。 相似文献
14.
Development of structural modeling techniques for evaluating HDPE plastic net pens used in marine aquaculture 总被引：3，自引：0，他引：3
Finite-element modeling (FEM) techniques are developed to determine the structural capabilities of net pen flotation structures made of high-density polyethylene (HDPE). The modeling approach uses shell elements and localized failure criteria to predict critical loading conditions. Finite element modeling simulations were performed using values for the modulus of elasticity for weathered HDPE determined from a series of tensile tests. Poisson's ratio and yield stress used with the approach were obtained from standard manufacturers values. To investigate the method, a series of experiments were performed in the laboratory by testing circular sections of HDPE pipe to localized failure (“kinking”). The same test was replicated with the FEM using localized failure techniques. Laboratory and model results were within 16%. A FEM was then built to represent the complex geometry of a net pen flotation structure deployed at an operational fish farm located in Eastport, ME, USA. Simulations were performed using attachment line tension values measured at the site. The goal was to assess flotation pipe stress levels for typical operational conditions. Simulations were also performed to investigate the maximum capabilities of the net pen structure with different attachment line configurations. Quantifying the operational limits will become more important as these systems are considered for more exposed, energetic environments. 相似文献
15.
本文对青渔４４１ｋｗ渔轮用双拖网的网线强度进行了测量和分析，得出了报废时的剩余强度平均为初始强度的５０％，最低的不足４０％。选择网线的初始强度为预定的报放废时余强度的两倍时，平均每天的折旧费最小。 相似文献
16.
本文通过四个系列网片的强度的实验室测定，认为网片破裂强度降与网线材料和规格有关外，还与网片规格、使用方向、相对干湿状态以及网片拉伸热处理方法有关；网片在受纵、横向力时所表现出的强度的差异主要依赖于其结市方式和定型热处理时的拉伸方向。 相似文献