共查询到20条相似文献，搜索用时 15 毫秒
1.
以白云鄂博露天铁矿东矿岩质高边坡为工程背景,结合现场地质调查、室内岩石和节理力学试验等数据,采用等效岩体技术,构建能充分反映节理分布特征的实验室、现场原位试验和工程尺度等多尺度等效岩体模型。通过对各类等效岩体模型进行单轴压缩试验,研究岩体单轴抗压强度、弹性模量等力学特性的尺寸效应和各向异性。研究表明：节理的存在使岩体表现出尺寸效应和各向异性,且随着尺寸的增大,这种特性基本呈逐渐减弱的趋势;研究区域岩体的表征单元体积、单轴抗压强度和弹性模量分别为20 m×10 m×10 m、1.46 MPa和3.91 GPa;岩体单轴抗压强度、弹性模量与轴向尺寸的关系,近似符合渐进式指数函数关系,且该函数能直观地给出工程尺度岩体的力学特性。 相似文献
2.
岩石非连续变形分析方法DDARF成功实现了模拟岩体裂纹萌生、扩展、贯通、破碎的全过程,但算法只考虑了岩体的线弹性本构模型,没有分析岩体的非线性应力-应变关系。为更符合真实岩体工程,同时扩展岩石非线性本构模型的应用范围,分别采用摩尔-库仑强度准则和最大拉应力强度准则对岩体进行剪切和拉伸破坏判断;对理想弹脆性本构模型进行算法分析,并在VC++平台下程序实现;对“自定义”的岩体非连续变形分析方法弹脆性本构模型与室内单轴压缩试验进行比较分析;将岩体非连续变形分析方法弹脆性本构模型应用于大型地下洞室开挖,并与线弹性本构模型进行对比。结果表明,非连续变形分析方法中自定义岩体弹脆性本构模型是可行的,它能够反映岩体变形的非线性特征,与室内试验吻合度较好;非连续变形分析方法弹脆性本构模型应用于大型地下工程,能更安全且真实地分析洞室围岩的稳定性,进而更好地指导地下洞室的防护措施。 相似文献
3.
对含交叉裂隙相似材料试件进行单轴压缩试验,用Abaqus对含交叉裂隙节理岩体进行应力分析,研究了含交叉裂隙节理岩体单轴压缩下的破坏机制。结果表明：交叉裂隙的主裂隙与加载方向呈30°、45°时,主裂隙是裂隙扩展及破坏的控制裂隙,此时含交叉裂隙岩体强度高于含单向裂隙岩体,是由于主裂隙裂尖最大环向应力σθmax低于单向裂隙;主裂隙与加载方向呈0°或90°时,次裂隙是控制裂隙;主裂隙与加载方向呈0°时,大部分次裂隙裂尖σθmax及裂尖最大应力强度因子KⅡmax高于单向裂隙,因此,此时大部分含交叉裂隙岩体强度低于含单向裂隙岩体;在主裂隙与加载方向呈90°工况组中,主、次裂隙夹角为45°时,次裂隙裂尖KⅡmax最大,所以此工况组中此时强度最低。 相似文献
4.
Rock burst is a complex dynamic process can lead to casualties, to failure and deformation of the supporting structures, and to damage of the equipment on site; hence, its prediction is of great importance in underground construction. We present a novel empirical method to predict rock burst based on the theory of logistic regression classifiers. An extensive database collected from the literature, which includes observations about rock burst occurrence (or not) in underground excavations in projects from all over the world, is used to train and validate the model. The proposed approach allows us to compute new class separation lines (or planes) to estimate the probability of rock burst, using different combinations of five possible input parameters—tunnel depth, H; maximum tangential stress, MTS; elastic energy index, W et; uniaxial compressive strength of rock, UCS; uniaxial tensile strength of rock, UTS—among which it was found that the preferable model could be developed in H–W et–UCS space. The proposed model is validated with goodness-of-fit tests and nine-fold cross-validation; results show that its predictive capability compares well with previously proposed empirical methods and confirm that, as expected, the probability of rock burst increases with excavation depth, and that both W et and UCS have a similarly significant influence on rock burst occurrence. Finally, expressions are proposed for identification of conditions associated with several reference values of rock burst probability, which can be employed in preliminary risk analyses. 相似文献
5.
Cheng Zhao Yimeng Zhou Qingzhao Zhang Chunfeng Zhao Hiroshi Matsuda 《国际地质力学数值与分析法杂志》2020,44(3):353-370
To deeply understand the cracking mechanical behavior of brittle rock materials, numerical simulations of a rock specimen containing a single preexisting crack were carried out by the expanded distinct element method (EDEM). Based on the analysis of crack tips and a comparison between stress- and strain-based methods, the strain strength criterion was adopted in the numerical models to simulate the crack initiation and propagation processes under uniaxial and biaxial compression. The simulation results indicated that the crack inclination angle and confining pressure had a great influence on the tensile and shear properties, peak strength, and failure behaviors, which also showed a good agreement with the experimental results. If the specimen was under uniaxial compression, it was found that the initiation stress and peak strength first decreased and then increased with an increasing inclination angle α. Regardless of the size of α, tensile cracks initiated prior to shear cracks. If α was small (such as α ≤ 30°), the tensile cracks dominated the specimen failure, the wing cracks propagated towards the direction of uniaxial compression, and the propagation of shear cracks was inhibited by the high concentration of tensile stress. In contrast, if α was large (such as α ≥ 45°), mixed cracks dominated the specimen failure, and the external loading favored the further propagation of shear cracks. Analyzing the numerical results of the specimen with a 45° inclination angle under biaxial compression, it was revealed that lateral confinement had a significant influence on the initiation sequence and the mechanical properties of new cracks. 相似文献
6.
张立 《水文地质工程地质》2021,48(5):74-80
川藏铁路沿线隧道围岩中常存在大量软弱夹层,且岩体受严寒气候影响较大。为研究夹层倾角和冻融循环对隧道围岩力学性质的影响,室内制备了不同软弱夹层倾角、不同冻融循环次数条件下的互层岩体,并对含软弱夹层岩体展开了单轴压缩试验。研究发现:（1）含软弱夹层岩体的硬岩部分变形较小,而软岩夹层部分的破坏更加剧烈。夹层倾角较小时（β=0°、30°）岩体破坏后裂纹与夹层倾角接近平行,当夹层倾角较大时岩体破裂面与夹层呈X型交叉状;冻融循环次数越多,岩体的破坏程度越强烈。（2）随着夹层倾角的增大,岩体的单轴抗压强度和弹性模量先减小后增大;当夹层倾角β=45°时,抗压强度和弹性模量最小,抗压强度较含水平软弱夹层岩体降低35.27%,弹性模量降低34.84%。（3）冻融循环劣化了夹层岩体的力学性质,岩体承载能力随着冻融循环次数的增加而减弱,但塑性变形能力有所增强。在冻融循环作用的影响下,岩体抗压强度、弹性模量呈负指数型递减,峰值点应变则呈线性增大。 相似文献
7.
含充填节理岩体相似材料试件单轴压缩试验及断裂损伤研究 总被引：2，自引：0，他引：2
研究了单轴压缩条件下裂隙含充填与否对节理岩体力学性能的影响。以相似材料模拟脆性岩石材料制作含预置裂隙试件,在刚性试验机上对试件进行单轴压缩试验,研究了裂隙充填与否对节理岩体强度峰值及峰后塑性变形能力的影响;用有限元软件ABAQUS对试件进行断裂及损伤分析,研究了裂隙充填与否对节理岩体应力强度因子及损伤因子的影响。研究表明,在单轴压缩情况下,裂隙中含充填与不含充填相比,裂隙含充填岩体峰值强度提高、峰后塑性变形能力增强、总应变能释放率Gc降低,增大了节理岩体抵抗开裂的能力;裂隙含充填岩体环向拉应力场从分布区域及峰值都小于无充填裂隙试件;在同样外荷载作用下,裂隙含充填岩体损伤度小于无充填岩体。 相似文献
8.
结构面是岩体区别于岩石材料的一大特征,其产状、迹长、密度等参数对岩体的力学性质有着重要影响。本文利用FLAC3D对含结构面岩体试样的单轴压缩特性进行了较为系统的数值模拟研究。文中建立了含不同组贯通性结构面的岩体试样模型和含不同倾角及迹长的非贯通结构面岩体试样模型,对每个试样进行单轴压缩试验的数值模拟,结构体和结构面均采用Mohr-Coulomb剪切和拉伸破坏准则。模拟中用编制的伺服控制程序通过调节加载速度,控制试样内最大不平衡力,研究含结构面试样单轴压缩情况下的变形、强度及破坏方式等特征。模拟结果显示,含1-3组贯通性结构面试样呈现各向异性特征,而含4组贯通性结构面试件呈现各向同性特征。随着贯通性结构面数量的增多,同尺寸试件的变形强度参数劣化。含单组非贯通性结构面试件,其单轴压缩模拟试验的应力-应变曲线峰值后出现应力降。基于Mohr-Coulomb抗剪强度准则和损伤理论所得的解析解与数值模拟结果所得的非贯通性结构面试件的单轴压缩强度不符,说明用抗剪强度准则与损伤理论刻画非贯通结构面试样的强度并不合理。随着非贯通性结构面贯通率的增大,试件的变形、强度参数劣化。含单组结构面试件的破坏方式可分为结构面控制破坏,结构面部分控制破坏和结构面不控制破坏3种类型,而随着结构面组数的增多,结构面控制试样破坏的概率增加。 相似文献
9.
为了研究不同倾角下多节理岩体力学行为,采用10 MN微机控制电液伺服大型多功能动静力三轴仪,开展包含较多预制非贯通节理类岩石试件的单轴压缩试验,研究了多节理岩体裂纹的特征、贯通模式、破坏模式、应力-应变特征等与节理倾角之间的关系。试验结果表明,（1）多节理岩体的裂纹类型主要有翼裂纹和次生共面裂纹,翼裂纹的扩展路径与单个节理情况下的扩展路径差异较大,翼裂纹起裂后沿起裂方向存在较长的扩展长度,直接与相邻节理或翼裂纹形成贯通,并且裂纹的贯通表现出四种不同的模式;（2）多节理岩体的破坏模式归纳为3种类型：平面破坏、块体转动式破坏和台阶式破坏;（3）根据多节理岩体的应力-应变曲线在应变软化阶段所表现出的不同非线性变形行为特征,可以将曲线归纳为4种类型;（4）多节理岩体的强度和变形各向异性特征非常显著,强度和弹性模量均在节理倾角30°时最小,90°时最大。 相似文献
10.
Influence of Sample Height-to-Width Ratios on Failure Mode for Rectangular Prism Samples of Hard Rock Loaded In Uniaxial Compression 总被引：3，自引：2，他引：1
Surface-parallel slabbing is a failure mode often observed in highly stressed hard rocks in underground excavations. This
paper presents the results of experimental studies on slabbing failure of hard rock with different sample height-to-width
ratios. The main purpose of this study was to find out the condition to create slabbing failure under uniaxial compression
and to determine the slabbing strength of hard rock in the laboratory. Uniaxial compression tests were carried out using five
groups of granite specimens. The mechanical parameters of the sample rock, Iddefjord granite from Norway, were measured on
the cylindrical and Brazilian disc specimens. The transition of the failure mode was studied using rectangular prism specimens.
The initiation and the propagation of slabbing fractures in specimens were identified by examining the relationship among
the applied stress, strain and the acoustic emission. The stress thresholds identified were compared to those reported by
other authors for crack initiation and brittle failure. It is observed that the macro failure mode will be transformed from
shear to slabbing when the height/width ratio is reduced to 0.5 in the prism specimens under uniaxial compression. Micro σ
1-parallel fractures initiate when the lateral strain departs from its linearity. Slabbing fractures are approximately parallel
to the loading direction. Labotatory tests show that the slabbing strength (σ
sl) of hard rock is about 60% of its uniaxial compression strength. It means that if the maximum tangential stress surrounding
an underground excavation reaches about the slabbing threshold, slabbing fractures may take place on the boundary of the excavation.
Therefore, the best way to stop or eliminate slabbing failure is to control the excavation boundary to avoid the big stress
concentration, so that the maximum tangential stress could be under the slabbing threshold. 相似文献
11.
为了给电磁辐射预测矿井冲击地压灾害提供理论依据,采用电磁波和损伤力学理论初步分析了电磁辐射能和加载机械能的关系;采用试验和能量理论研究了单轴压缩条件下煤体变形破坏产生电磁辐射能与受载煤体能量积聚、耗散的耦合关系。研究结果表明：加载机械能与煤体变形破坏产生的电磁辐射能成系数为m正线性关系,m与煤体的弹性模量成0.107 4的比例关系;受载煤体峰值弹性应变能与电磁辐射能成正对数关系,煤体的弹性能指数与峰值累积电磁辐射能、总累积电磁辐射能均成正线性关系,电磁辐射信号反映了能量聚集和耗散的状态,表征了煤体冲击破坏的难易程度。因此,电磁辐射能够预测矿井冲击地压灾害的发生。 相似文献
12.
由应变能密度因子理论得出裂纹沿着形状改变比能密度因子最小的方向扩展,但理论中所使用的应力强度因子是在拉应力作用下计算得出的,而自然界中的岩体通常处于压应力场中。因此,在修正的应变能密度因子理论的基础上,结合压缩荷载作用下的裂纹尖端应力强度因子,并考虑裂纹面之间的摩擦作用得出了针对压缩荷载作用下的岩石裂纹扩展的应变能密度因子理论,并运用该理论分析了裂纹倾角、围压以及裂面摩擦力对破裂角的影响,将分析结果与已有的试验和数值分析结果进行比较,取得了良好的一致性。分析得出,在单轴压缩荷载作用下临界破裂荷载随着裂纹倾角的增大而先减小、后增大,并且一个裂纹倾角对应多个破裂角,即裂纹朝多个方向发展;在三轴压缩荷载作用下,破裂角与围压大小有关。此研究成果可为压应力场中岩石裂纹扩展的数值模拟提供参考。 相似文献
13.
不同倾角节理组和锚固效应对岩体特性的影响 总被引：1，自引：0，他引：1
首先采用DDARF(discontinuous deformation analysis for rock failure)分析方法对双裂隙岩块进行单轴和双轴压缩模拟试验,研究了裂隙角度和侧向应力大小对岩块特性的影响,得到了裂隙岩块在这两种加载试验中的破坏过程、应力-应变曲线以及岩块中裂隙的起裂应力和岩块的峰值强度。在双轴压缩模拟试验中绘制了裂隙角度为45°的岩块在不同侧向压力下的强度包络线。其次,采用DDARF分析方法模拟劈裂试验中含裂隙试块的锚固效果,得到了4种不同锚固角度试块的轴向荷载–位移变化曲线和裂隙扩展规律。模拟结果与前人的类似条件下的试验结果相符良好。随后又将双裂隙试块双轴压缩模拟试验中得到的参数运用到一个地下洞室的工程实例中,用等效力学特性的方法分析对比了完整岩体和节理岩体洞室开挖完成后的破损状态的差异。最后运用DDARF分析方法研究了随机生成4组节理岩体的地下洞室的稳定性,得到了洞室节理围岩的裂隙扩展过程。同时通过对关键点位移的监测分析了锚杆的锚固效应。 相似文献
14.
M. Cai 《Rock Mechanics and Rock Engineering》2010,43(2):167-184
By applying the Griffith stress criterion of brittle failure, one can find that the uniaxial compressive strength (σc) of rocks is eight times the value of the uniaxial tensile strength (σt). The Griffith strength ratio is smaller than what is normally measured for rocks, even with the consideration of crack closure.
The reason is that Griffith’s theories address only the initiation of failure. Under tensile conditions, the crack propagation
is unstable so that the tensile crack propagation stress (σcd)t and the peak tensile strength σt are almost identical to the tensile crack initiation stress (σci)t. On the other hand, the crack growth after crack initiation is stable under a predominantly compressive condition. Additional
loading is required in compression to bring the stress from the crack initiation stress σci to the peak strength σc. It is proposed to estimate the tensile strength of strong brittle rocks from the strength ratio of
R = \fracs\textc | s\textt | = 8\fracs\textc s\textci . R = {\frac{{\sigma_{\text{c}} }}{{\left| {\sigma_{\text{t}} } \right|}}} = 8{\frac{{\sigma_{\text{c}} }}{{\sigma_{\text{ci}} }}}. The term
\fracs\textc s\textci {\frac{{\sigma_{\text{c}} }}{{\sigma_{\text{ci}} }}} accounts for the difference of crack growth or propagation in tension and compression in uniaxial compression tests.
\fracsc sci {\frac{{\sigma_{c} }}{{\sigma_{ci} }}} depends on rock heterogeneity and is larger for coarse grained rocks than for fine grained rocks. σci can be obtained from volumetric strain measurement or acoustic emission (AE) monitoring. With the strength ratio R determined, the tensile strength can be indirectly obtained from
| s\textt | = \fracs\textc R = \fracs\textci 8. \left| {\sigma_{\text{t}} } \right| = {\frac{{\sigma_{\text{c}} }}{R}} = {\frac{{\sigma_{\text{ci}} }}{8}}. It is found that the predicted tensile strengths using this method are in good agreement with test data. Finally, a practical
estimate of the Hoek–Brown strength parameter m
i is presented and a bi-segmental or multi-segmental representation of the Hoek–Brown strength envelope is suggested for some
brittle rocks. In this fashion, the rock strength parameters like σt and m
i, which require specialty tests such as direct tensile (or Brazilian) and triaxial compression tests for their determination,
can be reasonably estimated from uniaxial compression tests. 相似文献
15.
对灰岩开展单轴、常规三轴与峰前卸荷试验,对比分析不同应力路径下灰岩变形过程的能量变化特征。试验分析表明,灰岩加荷破坏和卸荷破坏的能量变化规律存在明显差异。由于围压抑制了裂纹的扩展,与单轴压缩破坏相比,常规三轴压缩试验灰岩吸收的总能量 和积蓄的弹性能 更多。常规三轴试验灰岩积蓄的弹性能 在峰值强度前一直增加,而卸荷破坏的弹性能 在卸荷开始后基本不变,说明卸荷破坏释放的弹性能 主要是在加荷阶段累积完成的,岩体所处的初始地应力状态决定了其破坏的能量释放量。加荷和卸荷应力路径下,灰岩临近破坏点耗散能 都快速增加,但是卸荷破坏耗散能 增速远大于加荷破坏耗散能增速,耗散能的迅速增加表明岩石破坏的发生。随着围压升高,灰岩吸收的总能量 和储存的弹性能 逐渐升高。随着卸荷速度增加,灰岩吸收的总能量 、储存的弹性能 和耗散的应变能 逐渐减小。 相似文献
16.
为了研究盐穴能源地下储库建造过程中,腔体围岩处在地温、卤水和地应力地质环境中盐岩的损伤演化特点,利用声发射技术分析盐岩受不同温度的饱和卤水作用后的单轴压缩损伤破坏过程。试验发现：在一定温度的饱和卤水中浸泡30 d后盐岩的单轴抗压强度和弹性模量有所降低,但降低的平均幅度很小;卤水对盐岩主要表现为溶蚀作用,而浸泡弱化作用非常小;单轴压缩过程中盐岩的应力-应变曲线与声发射-应变曲线具有较好的一致性,卤水浸泡后盐岩的累计声发射数随卤水的温度升高略有增加;卤水作用后盐岩试件的声发射率和累计数要小于无卤水作用盐岩;盐穴建造期盐岩受一定温度的卤水作用后盐岩的强度将出现一定弱化,但卤水也会促进损伤盐岩体的重结晶恢复,盐岩的这种特性有利于盐穴建造期安全和稳定。 相似文献
17.
A new rock mass classification for Coal Measures Rocks 总被引：2，自引：0，他引：2
Ergül Ya
ar 《Engineering Geology》2001,62(4):293-300
This paper examines a new rock mass classification system (RMCR) for Coal Measures Rocks which is based on extensive laboratory testing results. The new system has been developed using 12 parameters which consist of mineral content index, uniaxial compressive strength, uniaxial tensile strength, Young's modulus of elasticity, shear strength, cohesion of rocks, angle of internal friction, point load index, cone indenter index, Cerchar index, Shore schleroscope hardness and specific energy index. The RMCR value was obtained by a number of laboratory and in situ testing results which were obtained from the coal site. The objective of the RMCR is to estimate the rock mass properties for engineering purposes. 相似文献
18.
目前损伤力学已被认为是研究节理岩体力学行为的有效工具,但是在目前的节理岩体损伤变量定义中大多仅考虑节理几何特征而未考虑节理内摩擦角等力学参数,这显然不能很好地反映节理岩体的力学特征。为此,拟推导出一个能够综合考虑节理几何及力学参数的损伤变量（张量）,并由此建立单轴压缩荷载下岩体损伤本构模型。首先,基于断裂力学的由于单个节理存在引起的附加应变能增量与损伤力学的损伤应变能释放量相关联的观点,推导出了含非贯通节理岩体的损伤变量计算公式;其次,根据断裂力学理论对单轴压缩荷载下的单个节理尖端应力强度因子计算方法进行了研究,得出了应力强度因子KⅠ、KⅡ的计算公式;同时考虑多节理间的相互作用给出了单组单排及多排非贯通节理应力强度因子计算公式。最后,利用该模型对含单条非贯通节理的岩体在单轴压缩荷载作用下的峰值强度及损伤变量进行了分析计算。结果表明,当节理倾角小于其内摩擦角时,岩体强度与完整岩石相同,岩体损伤为零,而后随着节理倾角增加,岩体强度、损伤随节理倾角的变化分别呈开口向上及向下的抛物线,当节理倾角约为60°时,岩体损伤最大,强度最低。随着节理长度增加,岩体损伤增加,而随着节理内摩擦角的增加,岩体损伤则减小。 相似文献
19.
A combined finite-discrete element approach is used to simulate the complete 3D fracture process during conventional laboratory testing, including Brazilian indirect tension and uniaxial and biaxial compression. A typical granite rock type (based on the Lac du Bonnet granite) was simulated to investigate the fracture pattern and mechanical strength of brittle rock in the laboratory. Damage intensity parameters (D21 and D32) are introduced and utilized to characterize the induced damage in the models. These parameters provide an improved representation of the cumulative associated damage and facilitate a quantitative characterization of crack intensity during testing. The numerical simulations included both 3D and 2D models, and show that there is a good agreement between the strength response derived from simulations both in 3D and 2D and the considered rock material. A good correlation also exists between the fracture pattern in 3D and the equivalent 2D models. The influence of confinement on the biaxial strength and the associated damage in compression is investigated. While axial splitting is the dominant failure mode at low confinement, finite-discrete element simulations show that a shear failure mode tends to dominate as the confinement increases. The dependency of dilation upon the confining pressure is also demonstrated, the dilation angle decreasing with increased confinement. 相似文献
20.
裂纹扩展方向的确定对分析岩桥破坏机制和岩体抗剪强度参数具有重要意义。首先以断裂力学观点推导了复杂应力条件下裂纹尖端应力分布函数的表达式,以节理岩体尖端的扩展裂纹可分为张拉裂纹和剪切裂纹为前提,基于Griffith破坏判据,提出了张拉裂纹扩展方向(张裂角)的计算公式;基于Mohr-Coulomb判据,提出了剪裂纹扩展方向(剪裂角)的计算公式。通过新判据与试验和其他判据的结果对比表明,该判据能准确判断张拉裂纹扩展方向,而剪裂角的扩展方向有待进一步试验验证。分析表明:在单向拉应力作用下,张裂纹扩展方向均有偏向于最大主应力方向的趋势,张裂纹与最大主应力夹角小于15°;双向拉应力作用下,随着微裂纹倾角变大,张裂纹有远离最大主应力方向的趋势;单轴压缩作用下,张裂角随裂纹倾角的增加而减小,而两者的和为先减小后增加。 相似文献