首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 78 毫秒
1.
Eclogite-facies rocks and high-pressure granulites provide windows to the deeper parts of subduction zones and the root of mountain chains, carrying potential records of fluids associated with subduction-accretion-collision tectonics. Here, we report petrological and fluid inclusion data on retrogressed eclogite and high-pressure granulite samples from Sittampundi, Kanji Malai and Perundarai in southern India. These rocks occur within the trace of the Cambrian collisional suture which marks the final phase of amalgamation of the Gondwana supercontinent. The garnet–clinopyroxene assemblage in the eclogites preserves relict omphacite, whereas the high-pressure granulites are characterized by an assemblage of garnet and clinopyroxene in the absence of omphacite and with minor plagioclase, orthopyroxene, and quartz. Phase relations computed for the eclogite assemblage yield peak P–T conditions of 19 kbar and 1,010°C. The mafic granulites also preserve the memory of high to ultrahigh-temperature metamorphism followed by an isothermal decompression. Systematic fluid inclusion optical, microthermometric and laser Raman spectroscopic studies were conducted in garnet and plagioclase from the eclogite–high pressure granulite suite. The results suggest that the early fluids were a mixture of CO2, CH4 and N2 probably derived from decarbonation and devolatilization reactions in a subduction setting during the prograde stage. The later generation inclusions, which constitute the dominant category in all the samples studied, are characterized by a near-pure CO2 composition with moderate to high densities (up to 1.154 g/cm3). The highest density fluid inclusions recorded in this study occur within the mafic granulites from Sittampundi (0.968–1.154 g/cm3) and Kanji Malai (1.092–1.116 g/cm3). In some cases, carbonate minerals such as dolomite and calcite are associated with the CO2-rich fluid inclusions. The composition and densities of the later generation fluids closely match with those of the CO2-bearing fluid inclusions reported from ultrahigh-temperature granulites occurring proximal to the eclogite–high pressure granulite suite within this suture zone, and suggest a common tectonic link for the fluid regime. We evaluate the fluid characteristics associated with convergent plate margin processes and propose that the early aqueous fluids probably associated with the eclogites were consumed during the formation of the retrograde hydrous mineral assemblages, whereas the fluid regime of the high-pressure and ultrahigh-temperature granulites was mostly CO2-dominated. The tectonic setting of the rocks along a collisional suture marking the trace along which crustal blocks were welded through subduction–collision process is in favor of a model involving the derivation of CO2 from sub-lithospheric sources such as a carbonated tectosphere invaded by hot asthenosphere, or underplated mafic magmas.  相似文献   

2.
The Southern Marginal Zone of the Limpopo Belt in South Africa is characterised by a granulite and retrograde hydrated granulite terrane. The Southern Marginal Zone is, therefore, perfectly suitable to study fluids during and after granulite facies metamorphism by means of fluid inclusions and equilibrium calculations. Isolated and clustered high-salinity aqueous and CO2(-CH4) fluid inclusions within quartz inclusions in garnet in metapelites demonstrate that these immiscible low H2O activity fluids were present under peak metamorphic conditions (800-850 °C, 7.5-8.5 kbar). The absence of widespread high-temperature metasomatic alteration indicates that the brine fluid was probably only locally present in small quantities. Thermocalc calculations demonstrate that the peak metamorphic mineral assemblage in mafic granulites was in equilibrium with a fluid with a low H2O activity (0.2-0.3). The absence of water in CO2-rich fluid inclusions is due to either observation difficulties or selective water leakage. The density of CO2 inclusions in trails suggests a retrograde P-T path dominated by decompression at T<600 °C. Re-evaluation of previously published data demonstrates that retrograde hydration of the granulites at 600 °C occurred in the presence of H2O and CO2-rich fluids under P-T conditions of 5-6 kbar and ~600 °C. The different compositions of the hydrating fluid suggest more than one fluid source.  相似文献   

3.
Three successive metamorphic stages M1, M2 and M3 have been distinguished in polymetamorphic granulite facies quartz-feldspathic gneisses from the Seiland Igneous Province, Caledonides of northern Norway. An early period of contact metamorphism (M1; 750–950°C, ca. 5 kbar) was followed by cooling, accompanied by strong shearing and recrystallization at intermediate-P granulite facies conditions (M2; 700–750°C, 5–6kbar). High-P granulite facies (M3; ca. 700°C, 7–8 kbar) is related to recrystallization in narrow ductile shear zones and secondary growth on M2 minerals. On the basis of composition, fluid inclusions in cordierite, quartz and garnet can be divided into three major types: (1) CO2 inclusions; (2) mixed CO2–N2 inclusions; (3) N2 inclusions. Fluid chronology and mineral assemblages suggest that the earliest inclusions consist of pure CO2 and were trapped at the M1 contact metamorphic episode. A carbonic fluid was also present during the intermediate-P granulite facies M2 metamorphism. The CO2-rich inclusions in M2 garnet can be divided into two generations, an early lower-density and a late higher-density, with isochores crosscutting the P-T box of M2 and M3, respectively. The nitrogen-rich fluids were introduced at a late stage in the fluid evolution during the high-P M3 event. The mixed CO2–N2 inclusions, with density characteristics compatible with M3 conditions, are probably produced from intersection between pre-existing pure CO2 inclusions and N2 fluids introduced during M3. The fluid inclusion data agree with the P-T evolution established from mineral assemblages and mineral chemistry.  相似文献   

4.
Fluid inclusions in garnet, kyanite and quartz from microdiamond-bearing granulites in the Western Gneiss Region, Norway, document a conspicuous fluid evolution as the rocks were exhumed following Caledonian high- and ultrahigh-pressure (HP–UHP) metamorphism. The most important of the various fluid mixtures and daughter minerals in these rocks are: (N2 + CO2 + magnesian calcite), (N2 + CO2 + CH4 + graphite + magnesian calcite), (N2 + CH4), (N2 + CH4 + H2O), (CO2) and (H2O + NaCl + CaCl2 + nahcolite). Rutile also occurs in the N2 + CO2 inclusions as a product of titanium diffusion from the garnet host into the fluid inclusions. Volatiles composed of N2 + CO2 + magnesian calcite characterise the ambient metamorphic environment between HP–UHP (peak) and early retrograde metamorphism. During progressive decompression, the mole fraction of N2 increased in the fluid mixtures; as amphibolite-facies conditions were reached, CH4 and later, H2O, appeared in the fluids, concomitant with the disappearance of CO2 and magnesian calcite. Graphite is ubiquitous in the host lithologies and fluid inclusions. Thermodynamic modelling of the metamorphic volatiles in a graphite-buffered C-O-H system demonstrates that the observed metamorphic volatile evolution was attainable only if the f O2 increased from c. −3.5 (±0.3) to −0.8 (±0.3) log units relative to the FMQ oxygen buffer. External introduction of oxidising aqueous solutions along a system of interconnected ductile shear zones adequately explains the dramatic increase in the f O2. The oxidising fluids introduced during exhumation were likely derived from dehydration of oceanic crust and continental sediments previously subducted during an extended period of continental collision in conjunction with the Caledonian orogeny. Received: 15 December 1997 / Accepted: 25 May 1998  相似文献   

5.
Acadian (Late Silurian to Early Devonian) metamorphism in the Central Maine Terrane (CMT) in central Massachusetts is characterized by an early low-P, high-T (Buchan-type) metamorphism followed by thickening at high temperature (>650d? C) and then by cooling to 100-200d? C below peak recorded temperatures before eventual unroofing. Mineralogical and textural evidence for this path includes sillimanite pseudomorphs after early andalusite, abundant cordierite in pelitic lithologies, replacement of low-P cordierite-bearing assemblages by high-P garnet-bearing assemblages, and recrystallization of mylonites associated with late shear zones to form lower-T and higher-P assemblages. Peak conditions in the highest grade rocks were 685-780d? C and 5-6 kbar; the cooling path passed through 550d? C at about 6.5 kbar. The well-constrained P-T path documented from geological and mineralogical evidence for the CMT offers an unusual opportunity to examine characteristics of fluid inclusions that have experienced a long-lived metamorphic event spanning a broad range of P-T conditions. Fluid inclusion data from the CMT document a range of fluid compositions (CO2-rich, mixed CO2-N2-rich, N2-rich and H2O-rich) and densities during metamorphism. Densities of CO2 fluid inclusions range from 0.20 to 1.03 g cm-3. Medium-density CO2 fluid inclusions are contained in quartz inclusions within garnets in partial melt leucosomes, and in quartz grains within migmatites. Fluid inclusions within the quartz inclusions indicate trapping conditions of 650-700d? C at pressures below 5 kbar. Other CO2 fluid inclusions from matrix quartz yield isochores which pass through 700d? C and 5.2 kbar. The highest density inclusions associated with rocks containing the late high-P assemblages have isochores which pass below the estimated P-T conditions for recrystallization of the mylonite. Fluid inclusion evidence suggests an early low-P heating event, followed by thickening at high temperature, and then by nearly isobaric cooling to about 500d? C with later decompression. This interpretation is also consistent with previously published petrological models and supports an anticlockwise P-T path for the CMT of south-central Massachusetts.  相似文献   

6.
 At the Bufa del Diente contact-metamorphic aureole, brine infiltration through metachert layers embedded in limestones produced thick wollastonite rims, according to Cc+Qz=Wo+CO2. Fluid inclusions trapped in recrystallized quartz hosts include: (1) high salinity four phase inclusions [Th(V-L)=460–573° C; Td(salts)=350–400° C; (Na+K)Cleq=64–73 wt%; X CO 2≤0.02]; (2) low density vapour-rich CO2-bearing inclusions [Th(L-V)≈500±100° C; X CO 2=0.22–0.44; X NaCl≤0.01], corresponding to densities of 0.27± 0.05 gcm−3. Petrographical observations, phase compositions and densities show that the two fluids were simultaneously trapped in the solvus of the H2O-CO2-salts system at 500–600° C and 700±200 bars. The low density fluid was generated during brine infiltration at the solvus via the wollastonite producing reaction. Identical fluid types were also trapped as inclusion populations in wollastonite hosts 3 cm adjacent to quartz crystals. At room temperature, both fluid types additionally contain one quartz and one calcite crystal, generated by the back-reaction Wo+CO2=Cc+Qz of the host with the CO2-proportion of the fluid during retrogression. All of the CO2 was removed from the fluid. On heating in the microstage, the reaction progress of the prograde reaction was estimated via volume loss of the calcites. In vapour-rich fluids, 50% progress is reached at 490–530° C; 80% at 520–560° C; and 100% at 540–590° C, the latter representing the trapping temperatures of the original fluid at the two fluid solvus. The progress is volume controlled. With knowledge of compositions and densities from unmodified inclusions in quartz and using the equation of state of Duan et al. (1995) for H2O-CO2-NaCl, along with f CO 2-values extracted from it, the reaction progress curve was recalculated in the P-T-X-space. The calculated progress curve passes through the two fluid solvus up to 380° C/210 bars, continues in the one fluid field and meets the solvus again at trapping conditions. The P-T slope is steep, most of the reaction occurs above 450° C and there is high correspondence between calculated and measured reaction progress. We emphasize that with the exception of quartz, back-reactions between inclusion fluids and mineral hosts is a common process. For almost any prograde metamorphic mineral that was formed by a devolatilization reaction and that trapped the equilibrium fluid or any peak metamorphic fluid as an inclusion, a fluid-host back-reaction exists which must occur somewhere along the retrograde path. Such retrograde reactions may cause drastic changes in density and composition of the fluid. In most cases, however, evidence of the evolving mineral assemblages is not given for they might form submicroscopical layers at the inclusion walls. Received: 15 March 1995 / Accepted: 1 June 1995  相似文献   

7.
High-density CO2 inclusions occur abundantly in granulite fadesrocks (age of metamorphism 2–5b.y.) of the Nilgiri massif,southern India. The chronology of carbonic inclusions in thewidespread enderbitic granulites studied in relation to thedevelopment of micro-textures and mineral assemblages indicatesthat randomly oriented, negative-crystal-shaped CO2 inclusions(4–20 µim) in garnet and quartz grains (qtz I) armouredby garnet entrap syn-peak-metamorphic pore fluids. The moreabundant trail-bound CO2 inclusions in the deformed, polygonized,and partially recrystallized matrix quartz grains (qtz II andIII) and plagioclase grains were formed in connection with astage of compressional deformation and subsequent annealingrelated to the development of the late-Proterozoic Bhavani shearzone. These inclusions resulted from local re-equilibrationof the former peak-granulitic carbonic inclusions and re-entrapmentof released fluids. The presence of pure CO2 in all the inclusionsis confirmed by microthermometric data and laser-excited Ramanmicrospectrome-try. Temperatures of homogenization (liquid phase)are in the range of 50 to +20C, and the corresponding CO2 densitiesare between 1.154 and 0–807 g/cm3. Mineralogical thermobarometry on the enderbitic granulites documentsa continuous gradient of near-peak metamorphic conditions from750C, 9–10 kb in the northern part to 73OC, 7 kb inthe southwestern part of the Nilgiri massif. Uniform P, Testimates(600–650 C, 6–7 kb) for late coronitic garnet +quartz assemblages in enderbites and metadolerites indicatethat differential uplift of the massif to mid-crustal levelswas accomplished before late compressional deformation. In conformity,carbonic inclusions in quartz II and III are characterized byuniformly high density (1.154–1.08 g/cm3). In contrast,early carbonic inclusions in garnet and quartz I preserve thedensity contrast reflecting the regional P, T gradient duringnear-peak metamorphic fluid entrapment. The fluid inclusionsys-tematics indicate ‘near-isochoric’ uplift ofthe northern high-P domain, but near-isobaric cooling of thesouthwestern low-P domain. The carbonic fluids are thought tohave been derived either from internal sources during dehydration-meltingprocesses or from freezing synmetamorphic intrusives into thelower crust.  相似文献   

8.
Fluid inclusions were studied in quartz samples from early (stage I) gold-poor quartz veins and later (stage II) gold- and sulphide-rich quartz veins from the Wenyu, Dongchuang, Qiangma, and Guijiayu mesothermal gold deposits in the Xiaoqinling district, China. Fluid inclusion petrography, microthermometry, and bulk gas analyses show remarkably consistent fluid composition in all studied deposits. Primary inclusions in quartz samples are dominated by mixed CO2-H2O inclusions, which have a wide range in CO2 content and coexist with lesser primary CO2-rich and aqueous inclusions. In addition, a few secondary aqueous inclusions are found along late-healed fractures. Microthermometry and bulk gas analyses suggest hydrothermal fluids with typically 15–30 mol% CO2 in stage I inclusions and 10–20 mol% CO2 in stage II inclusions. Estimates of fluid salinity decrease from 7.4–9.2 equivalent wt.% NaCl to 5.7–7.4 equivalent wt.% NaCl between stage I and II. Primary aqueous inclusions in both stages show consistent salinity with, but slightly lower Th total than, their coexistent CO2-H2O inclusions. The coexisting CO2-rich, CO2-H2O, and primary aqueous inclusions in both stage I and II quartz are interpreted to have been trapped during unmixing of a homogeneous CO2-H2O parent fluid. The homogenisation temperatures of the primary aqueous inclusions give an estimate of trapping temperature of the fluids. Trapping conditions are typically 300–370 °C and 2.2 kbar for stage I fluids and 250–320 °C and 1.6 kbar for stage II fluids. The CO2-H2O stage I and II fluids are probably from a magmatic source, most likely devolatilizing Cretaceous Yanshanian granitoids. The study demonstrates that gold is largely deposited as pressures and temperatures fall accompanying fluid immiscibility in stage II veins. Received: 15 May 1997 / Accepted: 10 June 1998  相似文献   

9.
Fluid inclusions in garnet combined with element X-ray mapping, phase equilibrium modelling and conventional thermobarometry have been used to constrain the metamorphic evolution of metapelitic gneiss from the HP/UHP metamorphic terrane of Pohorje Mountains in the Eastern Alps, Slovenia. Retrograde P–T trajectory from ~2.75 GPa and 780°C is constrained by the composition of matrix phengite (6.66 apfu Si) coexisting with garnet cores, kyanite and quartz. The intersection of the X Prp = 0.25 isopleth for the garnet with the upper stability boundary for K-feldspar in the matrix indicates near-isothermal decompression to ~0.9 GPa at 720°C. Temperatures over 650°C during this stage are corroborated by the high degree of ordering of graphite inclusions associated with Zn, Mg-rich staurolite and phlogopite in the Mg-rich (X Prp = 0.22–0.25) garnet cores. Majority of garnet porphyroblasts are depleted in Mg (down to X Prp = 0.09) and enriched in Mn (up to X Sps = 0.12) along cracks and at their margins. The associated retrograde mineral assemblage comprises Zn, Mg-poor staurolite, muscovite, biotite–siderophyllite, sillimanite and quartz. The onset of the retrogression and the compositional modification of the garnet porphyroblasts were accompanied by the addition of fluid-deposited graphite around older graphite inclusions, probably due to removal of water from a graphite-buffered COH fluid by dissolution in partial silicic melt. Instantaneous expulsion of water near the melt solidus (640°C, max. 0.45 GPa) caused dissolution of the graphite at redox conditions corresponding to 0.25–1.25 logfO2 units below the QFM buffer, giving rise to a H2O–CO2–CH4 fluid trapped in primary inclusions in Mn-rich, Mg-poor, almandine garnet that reprecipitated within the retrogressed domains. The absence of re-equilibration textures and consistent densities of the fluid inclusions reflect a near-isochoric cooling postdating the near-isothermal decompression. Bulk water content in the metapelite attained 2 wt% during this stage. The low-degree partial melting and extensive hydration due to the release of the internally derived, low-pressure aqueous fluids led to the reset of peak-pressure mineral assemblage.  相似文献   

10.
ABSTRACT P-T conditions inferred from fluid inclusions in metamorphic rocks often disagree with the values predicted from mineral equilibria calculations. These observations suggest that inclusions formed during early stages of regional metamorphism continue to re-equilibrate during burial and subsequent uplift in response to differential pressure. P-T conditions accompanying burial and uplift were experimentally simulated by initially forming pure H2O inclusions in quartz at elevated temperatures and pressures, and then re-equilibrating the inclusions in the presence of a 20 wt% NaCl solution such that final confining pressures ranged from 5 kbar above to 4 kbar below the initial internal pressure of the inclusions at the temperature of re-equilibration. In all samples re-equilibrated at confining pressures below the internal pressure, some inclusions were formed that had compositions of 20 wt% NaCl and densities in accord with the final P-T conditions. Additionally, some inclusions were observed to contain fluids of intermediate salinities (between 0 and 20 wt% NaCl). Densities of these inclusions were also consistent with formation at the re-equilibration P-T conditions. The remainder of the fluid inclusions observed in these samples contained pure H2O and their homogenization temperatures corresponded to densities intermediate between the initial and final P-T conditions. In short-term experiments (7 days) where the initial internal overpressure exceeded 1 kbar, no inclusions were found that contained the original density and none were found to have totally re-equilibrated. Instead, most H2O inclusions re-equilibrated until their internal pressures were between ∼750 and 1500 bars above the confining pressure, regardless of the initial pressure differential. In a long-term experiment (52 days), inclusions re-equilibrated at a lower confining pressure than the initial internal pressure displayed homogenization temperatures corresponding to a range in final internal pressures between 0 kbar (i.e. total re-equilibration) and 1.2 kbar above the confining pressure. In experiments where the confining pressure during re-equilibration exceeded the initial internal pressure, densities of pure H2O inclusions increased to values intermediate between the initial and final P-T conditions. Additionally, these inclusions were generally surrounded by a three-dimensional halo of smaller inclusions, also of intermediate density, resulting in a texture similar to that previously ascribed to decrepitation from internal overpressure. In extreme cases where confining pressures were 4–5 kbar above the initial pressure, the parent inclusion almost completely closed leaving only the three-dimensional array of small (5 μm) inclusions, the outline of which may be several times the volume of the original inclusion. Groups of such inclusions closely resemble textures commonly observed in medium- to high-grade metamorphic rocks. Inclusions containing 10 and 42 wt% NaCl solutions trapped at 600 °c and 3 kbar were re-equilibrated at 600 °c and 1 kbar for 5 days in dry argon to evaluate the importance of H2O diffusion as a mechanism of lowering the inclusion bulk density. Salinities of re-equilibrated inclusions obtained from freezing point depressions and halite dissolution temperatures indicate that original compositions were preserved. Density changes similar to those previously described were noted in these experiments, in inclusions showing no visible microfractures. Therefore, density variations observed in inclusions in this study, re-equilibrated under rapid deformation conditions, are considered to result from a change in the inclusion volume, without significant loss of contents by diffusion or leakage.  相似文献   

11.
The Campbell-Red Lake gold deposit in the Red Lake greenstone belt, with a total of approximately 840 t of gold (past production + reserves) and an average grade of 21 g/t Au, is one of the largest and richest Archean gold deposits in Canada. Gold mineralization is mainly associated with silicification and arsenopyrite that replace carbonate veins, breccias and wallrock selvages. The carbonate veins and breccias, which are composed of ankerite ± quartz and characterized by crustiform–cockade textures, were formed before and/or in the early stage of penetrative ductile deformation, whereas silicification, arsenopyrite replacement and gold mineralization were coeval with deformation. Microthermometry and laser Raman spectroscopy indicate that fluid inclusions in ankerite and associated quartz (Q1) and main ore-stage quartz (Q2) are predominantly carbonic, composed mainly of CO2, with minor CH4 and N2. Aqueous and aqueous–carbonic inclusions are extremely rare in both ankerite and quartz. H2O was not detected by laser Raman spectroscopic analyses of individual carbonic inclusions and by gas chromatographic analyses of bulk samples of ankerite and main ore-stage quartz (Q2). Fluid inclusions in post-mineralization quartz (Q3) are also mainly carbonic, but proportions of aqueous and aqueous–carbonic inclusions are present. Trace amounts of H2S were detected by laser Raman spectroscopy in some carbonic inclusions in Q2 and Q3, and by gas chromatographic analyses of bulk samples of ankerite and Q2. 3He/4He ratios of bulk fluid inclusions range from 0.008 to 0.016 Ra in samples of arsenopyrite and gold. Homogenization temperatures (T h–CO2) of carbonic inclusions are highly variable (from −4.1 to +30.4°C; mostly to liquid, some to vapor), but the spreads within individual fluid inclusion assemblages (FIAs) are relatively small (within 0.5 to 10.3°C). Carbonic inclusions occur both in FIAs with narrow T h–CO2 ranges and in those with relatively large T h–CO2 variations. The predominance of carbonic fluid inclusions has been previously reported in a few other gold deposits, and its significance for gold metallogeny has been debated. Some authors have proposed that formation of the carbonic fluid inclusions and their predominance is due to post-trapping leakage of water from aqueous–carbonic inclusions (H2O leakage model), whereas others have proposed that they reflect preferential trapping of the CO2-dominated vapor in an immiscible aqueous–carbonic mixture (fluid unmixing model), or represent an unusually H2O-poor, CO2-dominated fluid (single carbonic fluid model). Based on the FIA analysis reported in this study, we argue that although post-trapping modifications and host mineral deformation may have altered the fluid inclusions in varying degrees, these processes were not solely responsible for the formation of the carbonic inclusions. The single carbonic fluid model best explains the extreme rarity of aqueous inclusions but lacks the support of experimental data that might indicate the viability of significant transport of silica and gold in a carbonic fluid. In contrast, the weakness of the unmixing model is that it lacks unequivocal petrographic evidence of phase separation. If the unmixing model were to be applied, the fluid prior to unmixing would have to be much more enriched in carbonic species and poorer in water than in most orogenic gold deposits in order to explain the predominance of carbonic inclusions. The H2O-poor, CO2-dominated fluid may have been the product of high-grade metamorphism or early degassing of magmatic intrusions, or could have resulted from the accumulation of vapor produced by phase separation external to the site of mineralization.Geological Survey of Canada contribution 2004383.  相似文献   

12.
The sapphirine granulites from G. Madugula, Eastern Ghats preserve a variety of mineral textures and reactions. Corona and reaction textures are used in conjunction with mineral compositions to construct a sequence of metamorphic reactions describing the mineralogical evolution of sapphirine granulites. An early stage is characterized by the development of sapphirine + quartz, spinel + quartz in textural equilibrium, and possible relicts after osumilite during peak metamorphic conditions. Sapphirine/spinel crystals were later detached from quartz in the form of mineral coronas. During a subsequent sapphirine-cordierite stage, several cordierite forming reactions reflect decreasingP-T conditions. Finally during the late stage, a few samples show evidence of retrogressive hydration. Sapphirine is rather iron-rich (12.8 wt%) and the Mg number in the analysed minerals varies in the order: cordierite > phlogopite > sapphirine > orthopyroxene > spinel > garnet.P-T conditions of metamorphism have been constrained through the application of geothermobarometry and thermodynamically calibrated MAS equilibria.P-T vectors from granulite facies rocks in the G. Madugula area indicate that the rocks experienced substantial decompression (up to 3 kbar) and moderate cooling (150–200°C) subsequent to peak conditions of metamorphism (8.4 kbar, > 900°C). The decompressionalP-T history of sapphirine granulites interpreted from textural features and thermobarometric estimates suggest that they may have eventually resulted from exhumation of thickened crust.  相似文献   

13.
Granulite xenoliths within alkali olivine basalts of the Pali-Aike volcanic field, southern Chile, contain the mineral assemblage orthopyroxene + clinopyroxene + plagioclase + olivine + green spinel. These granulites are thought to be accidental inclusions of the lower crust incorporated in the mantle-derived basalt during its rise to the surface. Symplectic intergrowths of pyroxene and spinel developed between olivine and plagioclase imply that the reaction olivine+plagioclase = Al-orthopyroxene + Al-clinopyroxene + spinel (1) occurred during subsolidus cooling and recrystallization of a gabbroic protolith of the granulites.Examination of fluid inclusions in the granulites indicates the ubiquitous presence of an essentially pure CO2 fluid phase. Inclusions of three different parageneses have been recognized: Type I inclusions occur along exsolution lamellae in clinopyroxene and are thought to represent precipitation of structurally-bound C or CO2 during cooling of the gabbro. These are considered the most primary inclusions present. Type II inclusions occur as evenly distributed clusters not associated with any fractures. These inclusions probably represent entrapment of a free fluid phase during recrystallization of the host grains. IIa inclusions are found in granoblastic grains and have densities of 0.68–0.88 g/cm3. Higher density (=0.90–1.02 g/cm3) IIb inclusions occur only in symplectite phases. Secondary Type III CO2+glass inclusions with =0.47–0.78 g/cm3 occur along healed fractures where basalt has penetrated the xenoliths. Type III inclusions appear related to exsolution of CO2 from the host basalt during its ascent to the surface. These data suggest that CO2 is an important constituent of the lower crust under conditions of granulite facies metamorphism, indicated by Type I and II fluid inclusions, and of the mantle, as indicated by Type III inclusions.Correlation of fluid inclusion densities with P-T conditions calculated from both two-pyroxene geothermometry and reation (1) indicate emplacement of a gabbroic pluton at 1,200–1,300° C, 4–6 kb; cooling was accompanied by a slight increase in pressure due to crustal thickening, and symplectite formation occurred at 850±35° C, 5–7 kb. Capture of the xenoliths by the basalt resulted in heating of the granulites, and CO2 from the basalt was continuously entrapped by the xenoliths over the range 1,000–1,200° C, 4–6 kb. Examination of fluid inclusions of different generations can thus be used in conjunction with other petrologic data to place tight constraints on the specific P-T path followed by the granulite suite, in addition to indicating the nature of the fluid phase present at depth.  相似文献   

14.
Naturally re-equilibrated fluid inclusions have been found in quartz crystals from alpine fissures of the Western Carpathians. Re-equilibration textures, such as planar arrangement of the decrepitation clusters as well as the quartz c- and a-axis oriented fracturing indicate explosion of fluid inclusions. The extent of fracturing, which is dependent on inclusion diameters, suggests inclusion fluid overpressures between 0.6–1.9 kb. Microthermometry data are controversial with the textures because of indicating roughly fixed initial fluid composition and density during re-equilibration, although inclusion volumes have been sometimes substantially reduced by crystallization of newly-formed quartz. It is concluded that fluid loss from re-equilibrated inclusions must have been compensated for by replacing equivalent quartz volume from cracks into parent inclusion. Such a mechanism has operated in a closed system and the re-equilibration related cracks have not been connected with mineral surface. The compositional and density differences between aqueous inclusions in decrepitation clusters and CO2-rich parent inclusions cannot be interpreted in terms of classical fluid immiscibility. Moreover, monophase liquid-filled aqueous inclusions and coexisting monophase CO2 vapour-filled inclusions in the decrepitation clusters are thermodynamically unacceptable under equilibrium metamorphic conditions. The effect of disjoining pressure resulting from structural and electrostatic forces in very thin fractures is suspected to have caused density and compositional inconsistencies between parent and cluster inclusions, as well as the unusual appearance of cluster inclusions. In high-grade metamorphic conditions, the re-equilibration probably leads to boundary layer-induced immiscibility of homogeneous H2O–CO2–NaCl fluids and to formation of compositionally contrasting CO2-rich and aqueous inclusions.  相似文献   

15.
Fluid inclusions have been studied in minerals infilling fissures (quartz, calcite, fluorite, anhydrite) hosted by Carboniferous and Permian strata from wells in the central and eastern part of the North German Basin in order to decipher the fluid and gas migration related to basin tectonics. The microthermometric data and the results of laser Raman spectroscopy reveal compelling evidence for multiple events of fluid migration. The fluid systems evolved from a H2O–NaCl±KCl type during early stage of basin subsidence to a H2O–NaCl–CaCl2 type during further burial. Locally, fluid inclusions are enriched in K, Cs, Li, B, Rb and other cations indicating intensive fluid–rock interaction of the saline brines with Lower Permian volcanic rocks or sediments. Fluid migration through Carboniferous sediments was often accompanied by the migration of gases. Aqueous fluid inclusions in quartz from fissures in Carboniferous sedimentary rocks are commonly associated with co-genetically trapped CH4–CO2 inclusions. P–T conditions estimated, via isochore construction, yield pressure conditions between 620 and 1,650 bar and temperatures between 170 and 300°C during fluid entrapment. The migration of CH4-rich gases within the Carboniferous rocks can be related to the main stage of basin subsidence and stages of basin uplift. A different situation is recorded in fluid inclusions in fissure minerals hosted by Permian sandstones and carbonates: aqueous fluid inclusions in calcite, quartz, fluorite and anhydrite are always H2O–NaCl–CaCl2-rich and show homogenization temperatures between 120 and 180°C. Co-genetically trapped gas inclusions are generally less frequent. When present, they show variable N2–CH4 compositions but contain no CO2. P–T reconstructions indicate low-pressure conditions during fluid entrapment, always below 500 bar. The entrapment of N2–CH4 inclusions seems to be related to phases of tectonic uplift during the Upper Cretaceous. A potential source for nitrogen in the inclusions and reservoirs is Corg-rich Carboniferous shales with high nitrogen content. Intensive interaction of brines with Carboniferous or even older shales is proposed from fluid inclusion data (enrichment in Li, Ba, Pb, Zn, Mg) and sulfur isotopic compositions of abundant anhydrite from fissures. The mainly light δ34S values of the fissure anhydrites suggest that sulfate is either derived through oxidation and re-deposition of biogenic sulfur or through mixing of SO42−-rich formation waters with variable amounts of dissolved biogenic sulfide. An igneous source for nitrogen seems to be unlikely since these rocks have low total nitrogen content and, furthermore, even extremely altered volcanic rocks from the study area do not show a decrease in total nitrogen content.  相似文献   

16.
Fluid inclusions, mineral thermometry and stable isotope data from two types of mineralogically and texturally contrasting pegmatites, barren ones and lithium ones, from the Moldanubian Zone of the Bohemian Massif were studied in order to constrain P–T conditions of their emplacement, subsolidus hydrothermal evolution and to estimate composition of the early exsolved fluid and that of the parental melt. Despite the fact that the lithium pegmatites are abundant throughout the crystalline units of the Bohemian Massif, data similar to this paper have not been published yet. The studied pegmatites are hosted by iron-rich calcic skarn bodies. This specific setting allowed scavenging of calcium, fluorine and some other elements from the host rocks into the pegmatitic melts and post-magmatic fluids. Such contamination process was important namely in the case of barren pegmatites, as can be deduced from the variation in anorthite contents in plagioclase and from the presence of fluorite, hornblende (with F content) or garnet in the contact zones of pegmatite dykes. Fluid inclusions were studied mostly in quartz, but also in fluorite, titanite and apatite. Early aqueous–carbonic and late aqueous fluids were identified in both pegmatite types. The P–T conditions of crystallization as well as the detailed composition of exsolved magmatic fluid, however, particularly differ. The magmatic fluids associated with barren pegmatites correspond to H2O–CO2 low salinity fluids, composition of which evolved from 20 to 23 to <5 mol% CO2, and from 2 to 4–6 mol% NaCl eq. Sudden decrease in the CO2 content of the post-magmatic fluids (<5 mol% CO2) seems to coincide with the enrichment of the fluid in calcium (from the contamination process) and resulted in precipitation of calcites (frequently found as trapped solid phases in fluid inclusions). The fluids associated with lithium pegmatites are more complex (H2O–CO2/N2–H3BO3–NaCl). The CO2 content of early exsolved fluid is 26–20 mol% CO2 and remains the same in the next fluid generation. The main difference between the magmatic and the first post-magmatic fluids is the presence of 7–9 wt% of H3BO3 (identified as daughter mineral sassolite) in the former. The second post-magmatic fluids are again CO2-poor (∼4 mol%) and more saline (∼4 mol% NaCl eq.). The composition of exsolved fluid was further used to constrain volatile composition and content of the parental melts. Finally, P–T conditions of pegmatite crystallization are constrained: 600–640°C and 420–580 MPa for the barren pegmatites and 500–570°C and 310–430 MPa for the lithium pegmatite. While the emplacement of the former occurred in thermal equilibrium with the Moldanubian host rock environment, the emplacement of the later suggests substantial thermal disequilibrium.  相似文献   

17.
Summary ?Fluid inclusions from two Mesoproterozoic, metamorphosed layered intrusive complexes, Niquelandia and Barro Alto, Goiás State, Brazil record multiple fluid influx events from the magmatic to granulitic and retrograde metamorphic stages. 1. The oldest inclusions contain high density CO2 ± N2 ± CH4 and are found as primaries in plagioclase and orthopyroxene in mafic granulite with homogenization temperatures between − 48 and − 28 °C. These inclusions may correspond to the early, magmatic stage. This type was found in samples from both the Niquelandia and the Barro Alto complexes. 2. Intragranular, relatively high density CO2 + N2 inclusions (Th between − 33 and − 26 °C) together with decrepitated and reequilibrated N2 inclusions (Th between − 160 and − 151 °C) in the rock-forming minerals can be associated with the granulite facies metamorphism. Such inclusions were found only in the Barro Alto complex. 3. Transgranular, high density, CO2–N2 inclusions (93% CO2 and 7% N2, according to Raman analysis, with Th between − 66.6 and − 50.4 °C) as well as the low density, secondary CO2 ± N2 ± CH4 inclusions (Th between − 13.0 and + 18.7 °C) and the H2O–NaCl–CaCl2 hypersaline inclusions (with halite dissolution temperature between 132 and 354 °C, and Th between 212 and 490 °C) are attributed to different fluid influx events during the retrograde metamorphism. This inclusion type can be found both in the Niquelandia and in the Barro Alto complexes. The fluid inclusion textures and compositions show several stages of fluid evolution. The fluid inclusion measurements and the geothermobarometric data indicate an anticlockwise P-T path for both the Barro Alto and the Niquelandia complexes. Received October 16, 2000; revised version accepted November 20, 2001  相似文献   

18.
A combined oxygen‐isotope and fluid‐inclusion study has been carried out on high‐ and ultrahigh‐pressure metamorphic (HP/UHPM) eclogites and garnet clinopyroxenite from the Dabie‐Sulu terranes in eastern China. Coesite‐bearing eclogites/garnet clinopyroxenite and quartz eclogites have a wide range in whole‐rock δ18OVSMOW, from 0 to 11‰. The high‐T oxygen‐isotope fractionations preserved between quartz and garnet preclude significant retrograde isotope exchange during exhumation, and the wide range in whole‐rock oxygen‐isotope composition is thought to be a presubduction signature of the precursors. Aqueous fluids with variable salinities and gas species (N2‐, CO2‐, or CH4‐rich), are trapped as primary inclusions in garnet, omphacite and epidote, and in quartz blebs enclosed within eclogitic minerals. In high‐δ18O HP/UHPM rocks from Hujialin and Shima, high‐salinity brine and/or N2 inclusions occur in garnet porphyroblasts, which also contain inclusions of coesite, Cl‐rich blue amphibole and dolomite. In contrast, in low‐δ18O eclogites from Qinglongshan and Huangzhen, the Cl concentrations in amphibole are very low, < 0.2 wt.%, and low‐salinity aqueous inclusions occur in quartz inclusions in epidote porphyroblasts and in epidote cores. These low‐salinity fluid inclusions are believed to be remnants of meteoric water, although the fluid composition was modified during pre‐ and syn‐peak HP/UHPM. Eclogites at Houshuichegou and Hetang contain CH4‐rich fluid inclusions, coexisting with high‐salinity brine inclusions. Methane was probably formed under the influence of CO2‐rich aqueous fluids during serpentinisation of mantle‐derived peridotites prior to or during plate subduction. Remnants of premetamorphic low‐ to high‐salinity aqueous fluid with minor N2 and/or other gas species preserved in the Dabie‐Sulu HP/UHPM eclogites and garnet clinopyroxenite indicate a great diversity of initial fluid composition in the precursors, implying very limited fluid–rock interaction during syn‐ and post‐peak HP/UHPM.  相似文献   

19.
Investigations of fluid inclusions in granulitefacies metapelites of southern Calabria enable characterization of the fluid composition of these lower crustal rocks, and constrain the petrologically deduced retrograde P-T path characterized by isothermal uplift prior to isobaric cooling in middle crustal levels. Fluid inclusions in cordierite, garnet and sillimanite have a CO2-rich composition. Inclusions in cordierite rarely contain minor amounts of N2 and H2O, and in garnets some CO2–CH4–N2 inclusions have been analyzed by Raman microprobe. Quartz reveals the most complex fluid melusion compositions (1) CO2-rich, (2) CO2–CH4–N2, (3) CH4–N2, (4) H2O–MgCl2–CaCl2–NaCl, (5) H2O–NaCl and (6) H2O–CO2. The earliest fluid inclusions after peak metamorphism are rich in CO2 with minor amounts of N2 and H2O. An early CO2–(H2O–N2) fluid composition has been confirmed by detection of CO2, H2O and N2 in the channels of the cordierite structure. Most of the early CO2-rich fluid inclusions were modified during the uplift from the lower to the middle crustal level, resulting in a density decrease with CO2 still dominant. The subsequent isobaric cooling led to further modifications of the fluid inclusions. High-density inclusions around implosion textures or scattered amongst lower-density ones must have formed during this cooling episode. Aqueous inclusions in quartz are mostly formed late and are consistent with trapping during retrograde rehydration.This project has been supported by the DFG as contribution to the special program Continental Lower Crust  相似文献   

20.
Minerals in eclogites from different localities in the Western Gneiss Region of the Norwegian Caledonides (age 425 Ma) contain a variety of fluid inclusions. The earliest inclusions recognized are contained in undeformed quartz grains, protected by garnet, and consist of H2O+N2 (with ). The reconstructed P-V-T-X properties of these fluid inclusions are compatible with peak or early-retrograde metamorphic conditions. Matrix minerals (quartz, garnet, apatite, plagioclase) contain a complex pattern of mostly truly secondary inclusions, dominated by CO2 and N2. The textural patterns and P-V-T-X properties of these inclusions are incompatible with the high pressures of the eclogite-forming metamorphic event, but suggest that they were formed during uplift, by a combination of remobilization of preexisting inclusions and influx of external fluids. The fluid introduced at a late stage was dominated by CO2, and did not contain N2. The present data agree with theoretical predictions of eclogite fluids from mineral equilibria, and highlight the differences between granulite (CO2) and eclogite (H2O+N2) fluid regimes. The provenance of the nitrogen in the eclogite fluid inclusions represents an important, but unsolved question in the petrology of high-pressure metamorphic rocks.Contribution no. 68 to the Norwegian programme of the International Lithosphere Project  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号