共查询到20条相似文献，搜索用时 15 毫秒
1.
2.
3.
4.
5.
6.
7.
8.
9.
J. R. Cochran J. A. Goff A. Malinverno D. J. Fornari C. Keeley X. Wang 《Marine Geophysical Researches》1993,15(1):65-75
Detailed bathymetric data from a Hydrosweep multibeam sonar survey of a 250 km-long portion of the superfast-spreading southern East Pacific Rise crest and flanks show that the along-axis variation in morphology and axial depth differs significantly from that observed at the fast-spreading northern East Pacific Rise. While the deep mantle upwelling pattern is similar under the northern and southern East Pacific Rise, our observations require that the connectivity of the shallow, subcrestal plumbing system be more efficient beneath the super-fast spreading southern East Pacific Rise than beneath the slower spreading northern East Pacific Rise. 相似文献
10.
Analysis of new multibeam bathymetry and all available magnetic data shows that the 340 km-long crest of the East Pacific Rise between Rivera and Tamayo transforms contains segments of both the Pacific-Rivera and the Pacific-North America plate boundaries. Another Pacific-North America spreading segment (Alarcon Rise) extends 60 km further north to the Mexican continental margin. The Pacific-North America-Rivera triple junction is now of the RRR type, located on the risecrest 60 km south of Tamayo transform. Slow North America-Rivera rifting has ruptured the young lithosphere accreted to the east flank of the rise, and extends across the adjacent turbidite plain to the vicinity of the North America-Rivera Euler pole, which is located on the plate boundary. The present absolute motion of the Rivera microplate is an anticlockwise spin at 4° m.y.–1 around a pole located near its southeast corner; its motion has recently changed as the driving forces applied to its margins have changed, especially with the evolution of the southern margin from a broad shear zone between Rivera and Mathematician microplates to a long Pacific-Rivera transform. Pleistocene rotations in spreading direction, by as much as 15° on the Pacific-Rivera boundary, have segmented the East Pacific Rise into a staircase of en echelon spreading axes, which overlap at lengthening and migrating nontransform offsets. The spreading segments vary greatly in risecrest geomorphology, including the full range of structural types found on other rises with intermediate spreading rates: axial rift valleys, split shield volcanoes, and axial ridges. Most offsets between the segments have migrated southward, but within the past 1 m.y. the largest of them (with 14–27 km of lateral displacement) have shown dueling behavior, with short-lived reversals in migration direction. Migration involves propagation of a spreading axis into abyssal hill terrain, which is deformed and uplifted while it occupies the broad shear zones between overlapping spreading axes. Tectonic rotation of the deformed crust occurs by bookshelf faulting, which generates teleseismically recorded strike-slip earthquakes. When reversals of migration direction occur, plateaus of rotated crust are shed onto the rise flanks. 相似文献
11.
12.
Daniel J. Fornari David G. Gallo Margo H. Edwards John A. Madsen Michael R. Perfit Alexander N. Shor 《Marine Geophysical Researches》1989,11(4):263-299
The Siqueiros transform fault system, which offsets the East Pacific Rise between 8°20N–8°30N, has been mapped with the Sea MARC II sonar system and is found to consist of four intra-transform spreading centers and five strike-slip faults. The bathymetric and side-looking sonar data define the total width of the transform domain to be 20km. The transform domain includes prominent topographic features that are related to either seafloor spreading processes at the short spreading centers or shearing along the bounding faults. The spreading axes and the seafloor on the flanks of each small spreading center comprise morphological and structural features which suggest that the two western spreading centers are older than the eastern spreading centers. Structural data for the Clipperton, Orozco and Siqueiros transforms, indicate that the relative plate motion geometry of the Pacific-Cocos plate boundary has been stable for the past 1.5 Ma. Because the seafloor spreading fabric on the flanks of the western spreading centers is 500 000 years old and parallels the present EPR abyssal hill trend (350°) we conclude that a small change in plate motion was not the cause for intra-transform spreading center development in Siqueiros. We suggest that the impetus for the development of intra-transform spreading centers along the Siqueiros transform system was provided by the interaction of small melt anomalies in the mantle (SMAM) with deepseated, throughgoing lithospheric fractures within the shear zone. Initially, eruption sites may have been preferentially located along strike-slip faults and/or along cross-faults that eventually developed into pull-apart basins. Spreading centers C and D in the eastern portion of Siqueiros are in this initial pull-apart stage. Continued intrusion and volcanism along a short ridge within a pull-apart basin may lead to the formation of a stable, small intra-transform spreading center that creates a narrow swath of ridge-parallel structures within the transform domain. The morphology and structure of the axes and flanks of spreading centers A and B in the western and central portion of Siqueiros reflect this type of evolution and suggest that magmatism associated with these intra-transform spreading centers has been active for the past 0.5–1.0 Ma. 相似文献
13.
14.
15.
16.
Morphology and tectonics of the Galapagos Triple Junction 总被引：1，自引：0，他引：1
We describe the results of GLORIA and SEABEAM surveys, supplemented by other marine geophysical data, of the Galapagos Triple Junction where the Pacific, Cocos and Nazca plates meet. The data allowed detailed topographic and tectonic maps of the area to be produced. We located each spreading axis with a precision of about 1 km. All three plate boundaries change character as the triple junction is approached to take on morphologies typical of slower spreading axes: the fast-spreading East Pacific Rise develops the morphology of a medium-spreading rise, and the medium-spreading Cocos-Nazca Rise takes on the appearance of a slow-spreading ridge. The axis of the East Pacific Rise was found to be completely continuous throughout the survey area, where it runs along the 102°05 W meridian. The Cocos-Nazca axis, however, fails to meet it, leaving a 20-km-wide band of apparently normal East Pacific Rise crust between its tip and the East Pacific Rise axis. As a consequence there must be considerable intra-plate deformation within the Cocos and Nazca plates. A further 40 km of the Cocos-Nazca axis is characterised by oblique faulting that we interpret to be a sign of rifting of pre-existing East Pacific Rise crust. We infer that true sea-floor spreading on the Cocos-Nazca axis does not begin until 60 km east of the East Pacific Rise axis. Other areas of similar oblique faulting occur on the Pacific plate west of the triple junction and along the rough-smooth boundaries of the Galapagos Gore. We present a model involving intermittent rifting, rift propagation, and sea-floor spreading, to explain these observations. 相似文献
17.
Peter Lonsdale 《Marine Geophysical Researches》1977,3(3):295-315
The geography of the East Pacific Rise (EPR) between 10°N and 6°S, redetermined by new surface ship surveys, is characterized by long spreading axes orthogonal to infrequent transform faults. Near 2°10N the EPR is intersected by the Cocos-Nazca spreading center at the Galapagos triple junction. The present pattern was established 27-5.5 m.y.b.p. by a complex sequence of rise-crest jumps and reorientations from a section of the Pacific-Farallon plate boundary. Transverse profiles of the rise flanks can be matched by thermal contraction curves for aging lithosphere, except between the triple junction and 4°S, where the east flank is anomalously shallow and almost horizontal. Most sections of spreading axis have the 10–30 km wide, 100–400 m high, axial ridge that is characteristic of fast spreading centers. However, within 60 km of the triple junction the rise crest structure is atypical, with an axial rift valley and elevated rift mountains, despite a spreading rate of 140 mm/yr. With the exception of this atypical section, the bathymetric profile along the spreading axis is remarkably even, with continuous, gentle slopes for hundreds of kilometers between major transform faults, where step-like offsets in axial depths occur. Most of the observations can be accommodated by a model in which the long spreading axes are underlain by continuous crustal magma chambers that allow easy longitudinal flow of magma, and whose size controls the style and dimensions of EPR crestal topography.Contribution of the Scripps Institution of Oceanography, new series. 相似文献
18.
19.
A study of Sea Beam bathymetry and SeaMARC II side-scan sonar allows us to make quantitative measures of the contribution of faulting to the creation of abyssal hill topography on the East Pacific Rise (EPR) 9°15 N–9°50 N. We conclude that fault locations and throws can be confidently determined with just Sea Beam and SeaMARC II based on a number of in situ observations made from the ALVIN submersible. A compilation of 1026 fault scarp locations and scarp height measurements shows systematic variations both parallel and perpendicular to the ridge axis. Outward-facing fault scarps (facing away from the ridge axis), begin to develop within 2 km of the ridge and reach their final average height of 60 m at 5–7 km. Beyond these distances, outward-dipping faults appear to be locked, although there is some indication of continued lengthening of outward-facing fault scarps out to the edge of the survey area. Inward-facing fault scarps (facing toward the ridge axis), initiate 2 km off axis and increase in height and length out to the edge of our data at 30 km, where the average height of inward fault scarps is 60–70 m and the length is 30 km. Continued slip on inward faults at a greater distance off axis is probable, but based on fault lengths, 80% of the lengthening of inward fault scarps occurs within 30 km of the axis (>95% for outward faults). Along-strike propagation and linkage of these faults are common. Outward-dipping faults accommodate more apparent horizontal strain than inward ones within 10 km of the ridge. The net horizontal extension due to faulting at greater distances is estimated as 4.2–4.3%, and inward and outward faults contribute comparably. Both inward- and outward-facing fault scarps increase in height from north to south in our study area in the direction of decreasing inferred magma supply. Average fault spacing is 2 km for both inward-dipping and outward-dipping faults. The azimuths of fault scarps document the direction of ridge spreading, but they are sensitive to local changes in least compressive stress direction near discontinuities. Both the ridge trend and fault scarp azimuths show a clockwise change in trend of 3–5° from 9°50 N to 9°15 N approaching the 9° N overlapping spreading center. 相似文献
20.
David K. Rea 《Marine Geophysical Researches》1976,2(4):291-313
The axis of the East Pacific Rise is defined by a topographic block about 15 km wide and 300 to 350 m high which is flanked by abyssal hills 100 to 200 m high and 3 to 5 km wide. These hills often are tilted such that their steep slopes face the axis. An empirical model explaining these features combines axial extrusion to form the central block and rotational faulting to lower the shoulders of the axial block to the regional depth and tilt them outward.The axial block is offset about 10 km left-laterally at 10.0°S and a similar amount right-laterally at 11.5°S. Offsets (or lack of offsets) of young magnetic anomalies indicate that these axial displacements occurred between 1.7 and 0.9 m.y. ago and 0.7 m.y. ago and the present in the north and south. respectively. These small axial offsets are interpreted to be the result of either brief episodes of asymmetric see-floor spreading or discrete jumps in the site of spreading activity. Both axial shifts were to the west; a unidirectional sequence of such shifts occurring at the above rate of one per million years would be difficult to differentiate from true regional asymmetric spreading and might explain that phenomenon on other medium-to fast-spreading rises.Reconnaissance data from the east flank of the East Pacific Rise indicate that spreading activity began on that part of the rise between the 9°S and 13.5°S fracture zones approximately 8.2 m.y. ago when the site of crustal accretion jumped westward from the now dormant Galapagos Rise. Slope change in crust approximately 2 and 6 m.y. old imply faster spreading rates between about 6 and 2 m.y. ago than either before or after that time. Identification and correlation of anomaly 3 allows an estimate of about 90 mm/y for this higher east flank spreading rate. Since 1.7 m.y. ago spreading rates have averaged about 80 mm/y to the west and 77 mm/y to the east. 相似文献