共查询到18条相似文献,搜索用时 93 毫秒
1.
2.
3.
4.
根据检定规程JJG703-2003《光电测距仪》的规定,采用测量不确定度A类或B类评定方法,在观测条件正好处于合格条件的临界状态情况下,对全站仪(测距仪)加乘常数的测量不确定度进行评定。 相似文献
5.
文章依据检定规程JJG4-1999《钢卷尺》的检定方法,对钢卷尺示值误差(修正值)检定的校准和测量能力(CMC)的表述进行分析,选取代表性的5个测量点进行测量不确定度评定,最后利用最小二乘法原理,拟合出CMC的最终函数表达式,得出CMC的合理表示方法。 相似文献
6.
对现行的测距仪加乘常数的计算方法进行了合理性分析,并对实测的数据和模拟的数据进行了计算。结果表明,现行的计算测距仪的加乘常数的方法是有缺陷的,需要进一步的去完善。 相似文献
7.
根据JJF1081-2002《垂准仪校准规范》的规定,采用测量不确定度A类或B类评定方法,在观测条件正好处于合格条件的临界状态的情况下,对垂准仪一测回垂准测量标准偏差校准的测量不确定度进行评定,并给出垂准仪在实际使用中一测回垂准测量标准偏差的预警值。 相似文献
8.
9.
测量不确定度是计量工作中不可或缺的重要数据,计量标准的测量不确定度,直接影响着计量器具的测量不确定度。作为计量检定机构,准确评定计量标准的测量不确定度,是确保计量检定/校准、检测工作的测量数据真实、准确、可靠的关键。 相似文献
10.
周期误差和加乘常数是中短程光电测距仪三项最重要的系统误差。传统的检测方法是首先用平台法测定仪器的周期误差,然后在光电测距仪检定基线场上用六段比较法测定仪器的加、乘常数,或者用六段解析法测定仪器的加 相似文献
11.
根据实际校准GPS接收机的经验,通过对GPS接收机的校准方法进行深入研究,结合实例,对校准过程中遇到的各种问题进行了分析探讨. 相似文献
12.
In the test-field calibration,multi-azimuth stereo image pairs areproduced of the outdoor large control-field by the stereo-vision system under cali-bration.While in the analytical processing,the relationship between image pairsis adopted as a constraint condition,which ensures the stability and quality of thecalibration results.This paper introduces the deduction process of the constraintconditions. 相似文献
13.
14.
Analytical plumbline and serf calibration techniques are applied to the calibration of two underwater cameras: a Rolleifex SLX réseau camera with an Aquamarin WKD-SLX/6006 submarine housing and a Nikonos V underwater camera. The Rolleiflex was fitted with a 50 mm Distagon f/4 lens and the Nikonos with a 28 mm Nikkor-UW f/3.5 lens. Comparisons of the results from the two methods of camera calibration are described. Theoretical differences are predicted for in-air versus in-water values for radial distortion. When these are compared to the actually observed values of distortion, an insight is provided of the precisions claimed for each method of camera calibration. 相似文献
15.
Procedures for the calibration of a stereopair simultaneously with a bundle adjustment are presented. Distances and directions in object space are used as additional observations. The analytical simultaneous calibration of a photogrammetric camera is essential when instrument methods do not determine the precalibrated parameters of interior orientation with sufficient accuracy. 相似文献
16.
测绘仪器检核管理系统的设计与实现 总被引:1,自引:0,他引:1
本文立足实践,从设计思想、系统框图、主要功能、技术特点、系统评价五个方面,尤其是主要功能(管理模块、校准模块、检定模块、查询模块、打印模块、帮助模块)方面介绍了计算机在测绘仪器校准、检定和管理中的应用。 相似文献
17.
18.
基于DLT模型的一种数码相机检校方法 总被引:1,自引:0,他引:1
直接线性模型法是相机检校中常用的一种方法,在其基础上提出了一种适合计算机处理的数码相机检校方法,其通过改变像方元素的单位,就可使用现有的摄影测量程序直接处理数字影像。文中进一步讨论了像素尺寸大小对系统误差的影响,并对像素大小的必要测定精度进行了公式推导。最后的实验结果表明,该方法可以获得较好的校准结果。 相似文献