首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Lattice diffusion coefficients have been determined for 19 elements (Li, Be, Na, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Zn, Y, Zr, Eu, Gd, Lu and Hf) in a single crystal of San Carlos olivine as a function of crystallographic orientation, at 1,300°C, 1 bar and fO2 = 10−8.3 bars, by equilibration with a synthetic silicate melt. Results for Li, Na, V, Cr, Fe and Zn are from diffusion of these elements out of the olivine, starting from their indigenous concentrations; those for all other elements are from diffusion into the olivine, from the silicate melt reservoir. Our 25-day experiment produced diffusion profiles 50 to > 700 μm in length, which are sufficiently long that precise analyses could be achieved by scanning laser ablation inductively coupled plasma mass spectrometry, even at concentration levels well below 1 μg g−1. For the divalent cations Ca, Mn, Fe and Ni, profiles were also obtained by electron microprobe analysis. The results of the two methods agree well with each other, and are consistent with divalent cation diffusion coefficients previously determined using different experimental methodologies. Olivine/melt partition coefficients retrieved from the data are also consistent with other published partitioning data, indicating that element incorporation and transport in olivine in our experiment occurred via mechanisms appropriate to natural conditions. Most of the examined trace elements diffuse through olivine at similar rates to the major octahedral cations Fe and Mg, showing that cation charge and radius have little direct influence on diffusion rates. Aluminium and P remain low and constant in the olivine, implying negligible transport at our analytical scale, hence Al and P diffusion rates that are at least two orders of magnitude slower than the other cations studied here. All determined element diffusivities are anisotropic, with diffusion fastest along the [001] axis, except Y and the REEs, which diffuse isotropically. The results suggest that element diffusivity in olivine is largely controlled by cation site preference, charge balance mechanisms and point-defect concentrations. Elements that are present on multiple cation sites in olivine (e.g. Be and Ti) and trivalent elements that are charge-balanced by octahedral site vacancies tend to diffuse at relatively fast rates.  相似文献   

2.
Experiments in the systems diopside-albite (Di-Ab) and diopside-albite-dolomite (Di-Ab-Dmt), doped with a wide range of trace elements, have been used to characterise the difference between clinopyroxene-silicate melt and clinopyroxene-carbonate melt partitioning. Experiments in Di-Ab-Dmt yielded clinopyroxene and olivine in equilibrium with CO2-saturated dolomitic carbonate melt at 3 GPa, 1375 °C. The experiments in Di-Ab were designed to bracket those conditions (3 GPa, 1640 °C and 0.8 GPa, 1375 °C), and so minimise the contribution of differential temperature and pressure to partitioning. Partition coefficients, determined by SIMS analysis of run products, differ markedly for some elements between Di-Ab and Di-Ab-Dmt systems. Notably, in the carbonate system clinopyroxene-melt partition coefficients for Si, Al, Ga, heavy REE, Ti and Zr are higher by factors of 5 to 200 than in the silicate system. Conversely, partition coefficients for Nb, light REE, alkali metals and alkaline earths show much less fractionation (<3). The observed differences compare quantitatively with experimental data on partitioning between immiscible carbonate and silicate melts, indicating that changes in melt chemistry provide the dominant control on variation in partition coefficients in this case. The importance of melt chemistry in controlling several aspects of element partitioning is discussed in light of the energetics of the partitioning process. The compositions of clinopyroxene and carbonate melt in our experiments closely match those of near-solidus melts and crystals in CMAS-CO2 at 3 GPa, suggesting that our partition coefficients have direct relevance to melting of carbonated mantle lherzolite. Melts so produced will be characterised by elevated incompatible trace element concentrations, due to the low degrees of melting involved, but marked depletions of Ti and Zr, and fractionated REE patterns. These are common features of natural carbonatites. The different behaviour of trace elements in carbonate and silicate systems will lead to contrasted styles of trace element metasomatism in the mantle. Received: 15 July 1999 / Accepted: 18 February 2000  相似文献   

3.
We have used trace element partitioning data available in the literature to investigate nonideality of the cations of Yb, Sm, Gd, Ca, Mn, Sc, Ni, and Al in silicate melt, olivine, and low-Ca pyroxene. Results are consistent with ordering of Mg and Fe around trace cations in olivine and pyroxene. On the basis of these data, we suggest there is an increasing tendency for Fe to congregate in the vincinity of the trace cation as the size of the trace cation increases. These results are important both in achieving a better understanding of trace element behavior in crystals and in constraining the temperature and compositional dependence of trace element partitioning.  相似文献   

4.
Element partitioning between olivine and silicate melt has been investigated at pressures 1–14 GPa, by using a 6–8 type multi-anvil high pressure apparatus. In order to observe systematics in the partitioning of trivalent ions, Li was added to the starting materials in order to increase the concentration of trivalent ions in olivine. With increasing pressure, it was found that partition coefficients of most of the elements gradually decreased. Trivalent ions generally showed parabolic pattern on partition coefficient — ionic radius diagram. When pyrolite-like material was used as the starting material, partition coefficient of Al, DAl, gradually increased with increase in pressure while the partition coefficients of the other elements decreased, and the DAl deviated from the parabolic pattern of other trivalent ions. The deviation of DAl from the D pattern of the other trivalent ions was also found when olivine was employed as main component of the starting material. This result may be ascribed to the compositional change of coexisting silicate melt with increase in pressure.  相似文献   

5.
Our current lack of understanding of the partitioning behavior of Sc, Y and the REE (rare-earth elements) can be attributed directly to the lack of a sufficiently large or chemically diverse experimental data set. To address this problem, we conducted a series of experiments using several different natural composition lavas, doped with the elements of interest, as starting compositions. Microprobe analyses of orthopyroxene, pigeonite, olivine, magnetite, ilmenite and co-existing glasses in the experimental charges were used to calculate expressions that describe REE partitioning as a function of a variety of system parameters. Using expressions that represent mineral-melt reactions (versus element ratio distribution coefficients) it is possible to calculate terms that express low-Ca pyroxene-melt partitioning behavior and are independent of both pyroxene and melt composition. Compositional variations suggest that Sc substitution in olivine involves either a paired substitution with Al or, more commonly, with vacancies. The partitioning of Sc is dependent both on melt composition and temperature. Our experimentally determined olivine-melt REE Ds (partition coefficients) are similar to, but slightly higher than those reported by McKay (1986) and support their conclusions that olivines are strongly LREE depleted. Y and REE mineral/melt partition coefficients for magnetite range from 0.003 for La to 0.02 for Lu. Ilmenite partition coefficients range from 0.007 for La to 0.029 for Lu. These experimental values are two orders of magnitude lower than many of the published values determined by phenocryst/matrix separation techniques.  相似文献   

6.
We present the variation in trace element partition coefficients measured at the interface between rapidly cooled clinopyroxene crystals and co-existing melts. Results indicate that, as the cooling rate is increased, clinopyroxene crystals are progressively depleted in Si, Ca and Mg counterbalanced by enrichments in Al (mainly tetrahedral Aliv), Na and Ti. Partition coefficients (Ds) for rare earth elements (REE), high field strength elements (HFSE) and transition elements (TE) increase with increasing cooling rate, in response to clinopyroxene compositional variations. The entry of REE into the M2 site is facilitated by a coupled substitution where either Na substitutes for Ca on the M2 site or Aliv substitutes for Si in the tetrahedral site. The latter substitution reflects an increased ease of locally balancing the excess charge at M2 as the number of surrounding Aliv atoms increases. Due to the lower concentration of Ca in rapidly cooled clinopyroxenes, divalent large ion lithophile elements (LILE) on M2 decrease at the expense of monovalent cations. Conversely, higher concentrations of HFSE and TE on the M1 site are facilitated as the average charge on this site increases with the replacement of divalent-charged cations by Alvi. Although crystallization kinetics modify clinopyroxene composition, deviations from equilibrium partitioning are insufficient to change the tendency of a trace element to be compatible or incompatible. Consequently, there are regular relationships between ionic radius, valence of the trace element and D. At both equilibrium and cooling rate conditions, Ds for isovalent cations define parabola-like curves when plotted against ionic radius, consistent with the lattice strain model, demonstrating that the partitioning of trace elements is driven by charge balance mechanisms; cation substitution reactions can be treated in terms of the energetics of the various charge-imbalanced configurations.  相似文献   

7.
Olivine/melt and orthopyroxene/melt rare-earth element (REE) partition coefficients consistent with clinopyroxene/melt partition coefficients were determined indirectly from subsolidus partitioning between olivine, orthopyroxene, and clinopyroxene after suitable correction for temperature. Heavy- and middle-REE ratios for olivine/clinopyroxene and orthopyroxene/clinopyroxene pairs correlate negatively with effective cationic radius, whereas those for the light REEs correlate positively with cationic radius, generating a U-shaped pattern in apparent mineral/clinopyroxene partition coefficients versus cationic radius. Lattice strain models of partitioning modified for subsolidus conditions yield negative correlations of olivine/clinopyroxene and orthopyroxene/clinopyroxene with respect to cationic radii, predicting well the measured partitioning behaviors of the heavy and middle REEs but not that of the light REEs. The light-REE systematics cannot be explained with lattice strain theory and, instead, can be explained by disequilibrium enrichment of the light REEs in melt inclusions or on the rims of olivine and orthopyroxene. Realistic light-REE partition coefficients were thus extrapolated from the measured heavy- and middle-REE partition coefficients using the lattice strain model. Light REE olivine/melt and orthopyroxene/melt partition coefficients calculated in this manner are lower than most published values, but agree reasonably well with partitioning experiments using the most recent in situ analytical techniques (secondary-ionization mass spectrometry and laser ablation inductively coupled plasma mass spectrometry). These new olivine/melt and orthopyroxene/melt partition coefficients are useful for accurate modeling of the REE contents of clinopyroxene-poor to -free lithologies, such as harzburgitic residues of melting. Finally, the application of the lattice strain theory to subsolidus conditions represents a framework for assessing the degree of REE disequilibrium in a rock.  相似文献   

8.
Partition coefficients for a range of Rare Earth Elements (REEs), Y, Sc, Al and Zr were determined between forsteritic olivine (nearly end-member Mg2SiO4) and ten melt compositions in the system CaO-MgO-Al2O3-SiO2 (CMAS) at 1 bar and 1400 °C, with concentrations of the trace elements in the olivine and the melt measured by laser-ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The REEs and Sc were added at levels sufficient to ensure that concentrations in the olivine were well above the detection limits. The REE partition coefficients decrease with increasing silica in the melt, indicating strong bonding between REEO1.5 and SiO2 in the melt. The variation of as a function of ionic radius is well described by the Brice equation for each composition, although a small proportion of this variation is due to the increase in the strength of the REEO1.5-SiO2 interactions in the melt with ionic radius. Scandium behaves very similarly to the REEs, but a global fit of the data from all ten melt compositions suggests that deviates somewhat from the parabolas established by the REE and Y, implying that Sc may substitute into olivine differently to that of the REEs. In contrast to the behaviour of the large trivalent cations, the concentration of Al in olivine is proportional to the square root of its concentration in the melt, indicating a coupled substitution in olivine with a high degree of short-range order. The lack of any correlation of REE partition coefficients with Al in olivine or melt suggests that the REE substitution in olivine is charge-balanced by cation vacancies. The partition coefficient of the tetravalent trace element Zr, which is highly incompatible in olivine, depends on the CaO content of the melt.  相似文献   

9.
Partitioning of Ca, Mn, Mg, and Fe2+ between olivine and melt has been used to examine the influence of energetically nonequivalent nonbridging oxygen in silicate melts. Partitioning experiments were conducted at ambient pressure in air and 1400°C with melts in equilibrium with forsterite-rich olivine (Fo >95 mol%). The main compositional variables of the melts were NBO/T and Na/(Na+Ca). In all melts, the main structural units were of Q4, Q3, and Q2 type with nonbridging oxygen, therefore, in the Q3 and Q2 units.For melts with high Q3/Q2-abundance ratio (corresponding to NBO/T near 1), increasing Na/(Na+Ca) [and Na/(Na+Ca+Mn+Mg+Fe2+)] results in a systematic decrease of the partition coefficients, KCaol/melt, KMnol/melt, KMgol/melt, and KFe2+ol/melt, because of ordering of the network-modifying Ca, Mn, Mg, and Fe2+ among nonbridging oxygen in Q3 and Q2 structural units. This decrease is more pronounced the smaller the ionic radius of the cation. With decreasing Q3/Q2 abundance ratio (less-polymerized melts) this effect becomes less pronounced.Activity-composition relations among network-modifying cations in silicate melts are, therefore, governed by availability of energetically nonequivalent nonbridging oxygen in individual Qn-species in the melt. As a result, any composition change that enhances abundance of highly depolymerized Qn-species will cause partition coefficients to decrease.  相似文献   

10.
The main objectives of this study were to investigate conditions for stable and metastable liquid immiscibility in dry borosilicate synthetic systems and to evaluate effects of temperature and bulk melt composition on two-liquid element partitioning and boron speciation. To distinguish between the stable immiscibility and quench heterogeneity, we used high-temperature centrifuge phase separation. For the case of stable liquid immiscibility, silica-rich (LS) and borate-rich (LB) conjugate liquids formed two distinct layers separated by a sharp meniscus. The liquids were quenched into glasses, which were analysed by electron microprobe. Some of the glasses were also studied by Raman spectroscopy. We used several synthetic mixtures along the danburite-anorthite (CaB2Si2O8-CaAl2Si2O8) and danburite-reedmergnerite (CaB2Si2O8-NaBSi3O8) joins. In addition, we studied four complex, six-component, Mg-bearing compositions with variable Na2O and Al2O3 contents. The experiments show that the width of the LS-LB miscibility gap decreases more rapidly with the B-Al substitution (in the danburite-anorthite join) than with the Ca-Na substitution, implying that interactions between network-forming elements have a greater effect on borate-silicate unmixing than the nature of network-modifying cations. Ca and Mg partition strongly to the depolymerised borate-rich liquid with LB-LS partition coefficients of ∼40 and higher. On the other hand, two-liquid partition coefficients of Na and Al in most cases are close to 1 and show complex variations with temperature and bulk melt composition. Raman spectra of LB glasses quenched at different temperatures suggest that the proportion of trigonal boron in bulk boron content decreases with decreasing temperature. The change in boron speciation appears to affect Al and Na two-liquid partitioning in such a way that at low temperatures, the latter element becomes more compatible with LS.  相似文献   

11.
 A new method for modeling fractional crystallization processes that involve olivine (ol), plagioclase (plag) and augite (aug) is presented. This crystallization assemblage is the major control on the chemical variations in mid-ocean ridge basalts. The compositional and temperature variations in ol-plag-aug saturated basalts over a range of pressures are described using empirical expressions. A data base of 190 experiments in natural and basalt-analog chemical systems is used to describe temperature, Al, Ca and Mg molar fractions as functions of Si, Fe, Na, Ti and K molar fractions and pressure. Increases in the abundances of Na and K cause Ca and Mg abundances to decrease and Al abundance to increase in ol-plag-aug saturated melts. The equations can be used to predict pressure and temperature and thus provide a useful thermobarometer. A model is described to calculate ol-plag-aug fractional crystallization as a function of pressure and melt composition, using melt and augite models developed here, combined with existing models for olivine-melt and plagioclase-melt equilibria. We compare the fractional crystallization sequence of ALV-2004-3-1 predicted from the models presented in this paper, Langmuir et al. (1992) modified by Reynolds (1995), Ghiorso and Sack (1995) and Ariskin et al. (1993) at 0.001 and 4 kbar. As an example the model is applied to estimate pressure of crystallization of glasses from the east flank of the East Pacific Rise at 11°45′N. Received: 24 July 1995 / Accepted: 12 January 1996  相似文献   

12.
The effect of silicate liquid structure upon mineral-liquid partitioning has been investigated by determining element partitioning data for coexisting immiscible granitic and ferrobasaltic magmas. The resulting elemental distribution patterns may be interpreted in terms of the relative states of polymerization of the coexisting magmas. Highly charged cations (REE, Ti, Fe, Mn, etc.) are enriched in the ferrobasaltic melt. The ferrobasaltic melt is relatively depolymerized due to its low SiO ratio. This allows highly charged cations to obtain stable coordination polyhedra of oxygen within the ferrobasaltic melt. The granitic melt is a highly polymerized network structure in which Al can occupy tetrahedral sites in copolymerization with Si. The substitution of Al+3 for Si+4 produces a local charge imbalance in the granitic melt which is satisfied by a coupled substitution of alkalis, thus explaining the enrichment of low charge density cations, the alkalis, in the granitic melt. P2O5 increases the width of the solvus and, therefore, the values of the distribution coefficients of the trace elements. This effect is attributed to complexing of metal cations with PO4?3 groups in the ferrobasaltic melt.The values of ferrobasalt-granite liquid distribution coefficients are reflected in distribution coefficients for a mineral and melts of different compositions. The mineral-liquid distribution coefficient for a highly charged cation is greater for a mineral coexisting with a highly polymerized melt (granite) than it is for that same mineral and a depolymerized melt (ferrobasalt). The opposite is true for low charge density cations. Mineralliquid and liquid-liquid distribution coefficients determined for the REE's indicate that fractionated REE patterns are due to mineral selectivity and not the state of polymerization of the melt.  相似文献   

13.
Isobaric and isothermal experiments were performed to investigate the effect of melt composition on the partitioning of trace elements between titanite (CaTiSiO5) and a range of different silicate melts. Titanite-melt partition coefficients for 18 trace elements were determined by secondary ion mass spectrometry (SIMS) analyses of experimental run products. The partition coefficients for the rare earth elements and for Th, Nb, and Ta reveal a strong influence of melt composition on partition coefficients, whereas partition coefficients for other studied monovalent, divalent and most quadrivalent (i.e., Zr, Hf) cations are not significantly affected by melt composition. The present data show that the influence of melt composition may not be neglected when modelling trace element partitioning.It is argued that it is mainly the change of coordination number and the regularity of the coordination space of trace elements in the melt structure that controls partition coefficients in our experiments. Furthermore, our data also show that the substitution mechanism by which trace elements are incorporated into titanite crystals may be of additional importance in this context.  相似文献   

14.
High-pressure melting experiments were performed at ~26 GPa and ~2,200–2,400°C on synthetic peridotite compositions with varying FeO and Al2O3 contents and on a synthetic CI chondrite analogue composition. Peridotite liquids show a crystallisation sequence of ferropericlase (Fp) followed down temperature by Mg-silicate perovskite (MgPv) + Fp, which contrasts a sequence of MgPv followed by MgPv + Fp observed in the chondritic composition. The difference in crystallisation sequence is a consequence of the different bulk Mg/Si ratios. MgPv/melt partition coefficients for major, minor and trace elements were determined by electron microprobe and secondary ion mass spectrometry. Partition coefficients of tri- and tetravalent elements increase with increasing Al concentration in MgPv. A lattice strain model indicates that Al3+ substitutes predominantly onto the Si-site in MgPv, whereas most elements substitute onto the Mg-site, which is consistent with a charge-compensating coupled substitution mechanism. MgPv/melt partition coefficients for Mg (DMg) and Si (DSi) are related to the melt Mg/Si ratio such that DSi becomes lower than DMg at low Mg/Si melt ratios. We use a crystal fractionation model, based on upper mantle refractory lithophile element ratios, to constrain the amount of MgPv and Ca-silicate perovskite (CaPv) that could have fractionated during a Hadean magma ocean event and could still be present as a chemically distinct heterogeneity in the lower mantle today. We show that a fractionated crystal pile composed of 96% MgPv and 4% CaPv could comprise up to 13 wt% of the entire mantle.  相似文献   

15.
Adsorption of H2O, NH3 and C6H6 on H- and alkali metal-exchanged structures of mordenite and on corresponding cations on the smectite layer is investigated by ab initio density-functional calculations. Proton or an alkali metal cation compensates one Al/Si framework substitution and resides in the extra-framework position of zeolite or above flat smectite layer close to the Al/Si substitution. Pronounced similarities between zeolite and smectite are observed in changes of the adsorption energies and location of the external cation with changing character of the external cation. Calculated adsorption energies exhibit the following trend: E(NH3) > E(H2O) > E(C6H6). Because of looser contact with the framework, zeolitic cations are stronger adsorption centers and calculated adsorption energies of zeolites are by ~20–30% larger than cations of smectites. The highest adsorption energy is calculated for H-exchanged structures and down the group of alkali metal cations a decrease of the adsorption energy is observed. Deviations from the smooth variation of the adsorption energy are caused by: (1) formation of strong hydrogen bonds in H-exchanged structures, (2) adsorption induced migration of the external Li+ cation, and (3) steric hindrances of the flat C6H6 molecule adsorbed on the cation in the cage of zeolite.  相似文献   

16.
In this experimental study, we examine the mineral-melt partitioning of major and trace elements between clinopyroxene and CO2-rich kimberlitic melts at a pressure of 6 GPa and temperatures of 1410°C and 1430°C. The melts produced contain ∼ 28 wt% dissolved CO2, and are saturated with olivine and clinopyroxene. To assess the effects of temperature, crystal and melt compositions on trace element partitioning, experiments were performed in the model CaO-MgO-Al2O3-SiO2-CO2 system. Our results reveal that all the elements studied, except Al, Mg, Si, and Ga, are incompatible in clinopyroxene. Partition coefficients show a considerable range in magnitude, from ∼ 10−3 for DU and DBa to ∼ 2.5 for DSi. The two experimental runs show similar overall partitioning patterns with the D values being lower at 1430°C. Rare earth elements display a wide range of partition coefficients, DLa (0.012-0.026) being approximately one order of magnitude lower than DLu (0.18-0.23). Partition coefficients for the 2+ and 3+ cations entering the M2-site exhibit a near-parabolic dependence on radius of the incorporated cations as predicted from the lattice strain model. This underlines the contribution made by the crystal structure toward controlling the distribution of trace elements. Using data obtained in this study combined with that in the published literature, we also discuss the effects that other important parameters, namely, melt composition, pressure, and temperature, could have on partitioning.Our partition coefficients have been used to model the generation of the Group I (GI) kimberlites from South Africa. The numerical modeling shows that kimberlitic melts can be produced by ∼0.5% melting of a MORB-type depleted source that has been enriched by small-degree melts originating from a similar depleted source. This result suggests that the source of GI kimberlites may be located at the lithosphere-asthenosphere transition. Percolation of small degree melts from the asthenosphere would essentially create a metasomatic horizon near the bottom of the non-convecting sublithospheric mantle. Accumulation of such small degree melts together with the presence of volatiles and conductive heating would trigger melting of the ambient mantle and subsequently lead to eruption of kimberlitic melts. Additionally, our model shows that the GI source can be generated by metasomatism of a 2 Ga old MORB source ca. 1 Ga ago. Assuming that MORB-type mantle is the most depleted source of magmas on earth, then this is the oldest age at which the GI source could have existed. However, this age most likely reflects the average age of a series of metasomatic events than that of a single event.  相似文献   

17.
High-temperature–pressure experiments were carried outto determine the chlorine–hydroxyl exchange partitioncoefficient between hornblende and melt in the 1992 Unzen dacite.Cl in hornblende and melt was analyzed by electron microprobe,whereas OH in hornblende and melt was calculated assuming anionstoichiometry of hornblende and utilizing the dissociation reactionconstant for H2O + O = 2(OH) in water-saturated melt, respectively.The partition coefficient strongly depends on the Mg/(Mg + Fe)ratio of hornblende, and is expressed as ln K1 = (Cl/OH)hb/(Cl/OH)melt= 2·37 – 4·6[Mg/(Mg + Fe)]hb at 2–3kbar and 800–850°C. The twofold variation in Cl contentin the oscillatory zoned cores of hornblende phenocrysts inthe 1991–1995 dacite cannot be explained by the dependenceof the Cl/OH partition coefficient on the Mg/(Mg + Fe)hb ratio,and requires c. 80% variation of the Cl/OH ratio of the coexistingmelt. Available experimental data at 200 MPa on Cl/OH fractionationbetween fluid and melt suggest that c. 1·2–1·8wt % degassing of water from the magma can explain the required80% variation in the Cl/OH ratio of the melt. The negative correlationbetween Al content and Mg/(Mg + Fe) ratio in the oscillatoryzoned cores of the hornblende phenocrysts is consistent withrepeated influx and convective degassing of the fluid phasein the magma chamber. KEY WORDS: chlorine; element partitioning; hornblende; oscillatory zoning; Unzen volcano  相似文献   

18.
The influence on olivine/melt transition metal (Mn, Co, Ni) partitioning of substitution in the tetrahedral network of silicate melt structure has been examined at ambient pressure in the 1450-1550 °C temperature range. Experiments were conducted in the systems NaAlSiO4-Mg2SiO4- SiO2 and CaAl2Si2O8-Mg2SiO4-SiO2 with about 1 wt% each of MnO, CoO, and NiO added. These compositions were used to evaluate how, in silicate melts, substitution and ionization potential of charge-balancing cations affect activity-composition relations in silicate melts and mineral/melt partitioning.The exchange equilibrium coefficient, , is a positive and linear function of melt Al/(Al + Si) at constant degree of melt polymerization, NBO/T. The is negatively correlated with the ionic radius, r, of the M-cation and also with the ionization potential (Z/r2, Z = electrical charge) of the cation that serves to charge-balance Al3+ in tetrahedral coordination in the melts. The activity coefficient ratio, (γM/γMg)melt, is therefore similarly correlated.These melt composition relationships are governed by the distribution of Al3+ among coexisting Q-species in the peralkaline (depolymerized) melts coexisting with olivine. This distribution controls Q-speciation abundance, which, in turn, controls (γM/γMg)melt and . The relations between melt structure and olivine/melt partitioning behavior lead to the suggestion that in natural magmatic systems mineral/melt partition coefficients are more dependent on melt composition and, therefore, melt structure the more alkali-rich and the more felsic the melt. Moreover, mineral/melt partition coefficients are more sensitive to melt composition the more highly charged or the smaller the ionic radius of the cation of interest.  相似文献   

19.
Colin H. Donaldson 《Lithos》1975,8(2):163-174
Concentration gradients in glass adjacent to skeletal olivines in a DSDP basalt have been examined by electron probe. The glass is depleted in Mg, Fe, and Cr and enriched in Si, Al, Na, and Ca relative to that far from olivine. Ionic diffusion coefficients for the glass compositions are calculated from temperature, ionic radius and melt viscosity, using the Stokes-Einstein relation. At 1170°C, the diffusion coefficient of Mg2+ ions in the basalt is 4·5.10?9 cm2/s. Comparison with measured diffusion coefficients in a mugearite suggests this value may be 16 times too small. The concentration gradient data and the diffusion coefficients are used to calculate instantaneous olivine growth rates of 2–6.10?7 cm/s. This is too slow for olivine to have grown in situ during quenching. Growth necessarily preceded emplacement such that the composition of the crystals plus the enclosing glass need not be that of a melt. The computed olivine growth rates are compatible with the rate of crystallization deduced for the Skaegaard intrusion.  相似文献   

20.
The distribution of rare earth elements (REE) between clinopyroxene (cpx) and basaltic melt is important in deciphering the processes of mantle melting. REE and Y partition coefficients from a given cpx-melt partitioning experiment can be quantitatively described by the lattice strain model. We analyzed published REE and Y partitioning data between cpx and basaltic melts using the nonlinear regression method and parameterized key partitioning parameters in the lattice strain model (D 0, r 0 and E) as functions of pressure, temperature, and compositions of cpx and melt. D 0 is found to positively correlate with Al in tetrahedral site (Al T ) and Mg in the M2 site (MgM2) of cpx and negatively correlate with temperature and water content in the melt. r 0 is negatively correlated with Al in M1 site (AlM1) and MgM2 in cpx. And E is positively correlated with r 0. During adiabatic melting of spinel lherzolite, temperature, Al T , and MgM2 in cpx all decrease systematically as a function of pressure or degree of melting. The competing effects between temperature and cpx composition result in very small variations in REE partition coefficients along a mantle adiabat. A higher potential temperature (1,400°C) gives rise to REE partition coefficients slightly lower than those at a lower potential temperature (1,300°C) because the temperature effect overwhelms the compositional effect. A set of constant REE partition coefficients therefore may be used to accurately model REE fractionation during partial melting of spinel lherzolite along a mantle adiabat. As cpx has low Al and Mg abundances at high temperature during melting in the garnet stability field, REE are more incompatible in cpx. Heavy REE depletion in the melt may imply deep melting of a hydrous garnet lherzolite. Water-dependent cpx partition coefficients need to be considered for modeling low-degree hydrous melting.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号