首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 406 毫秒
1.
The Middle Berriasian deposits of the Jura platform in Switzerland and France have already been well studied in terms of high-resolution sequence stratigraphy and different orders of depositional sequences (large-, medium-, and small-scale) have been defined. The hierarchical stacking pattern of the sequences and the time span represented by the investigated interval imply that sea-level fluctuations in the Milankovitch frequency band as well as differential subsidence caused the observed changes of accommodation on the Jura platform. The present study focuses on three small-scale sequences within the transgressive interval of a large-scale sequence. The initial flooding of the platform is marked by a facies change from supra- and intertidal (Goldberg Formation) to shallow-marine subtidal deposits (Pierre Chatel Formation). Detailed logging and facies analysis of 11 sections allow recognizing small environmental changes that define elementary sequences within the well-established small-scale sequences and distinguishing between autocyclic and allocyclic processes in sequence formation. It is concluded that the small-scale sequences correspond to the 100-ka orbital eccentricity cycle, while allocyclic elementary sequences formed in tune with the 20-ka precession cycle. Based on the correlation of elementary and small-scale sequences it can be shown that the Jura platform has been flooded stepwise by repeated transgressive pulses. Differential subsidence and pre-existing platform morphology further controlled sediment accumulation and distribution during the transgression. The combination of high-resolution sequence stratigraphy and cyclostratigraphy then enables the reconstruction of hypothetical palaeogeographic maps in time increments of a few ten thousand years.  相似文献   

2.
The Lower Eocene Ametlla Formation of the Ager Basin, Spanish Pyrenees, is a rapidly deposited shallow marine unit formed in a setting characterized by syn-sedimentary tectonic activity. Mapping of the formation over a distance of 25 km was conducted according to sequence stratigraphical principles with emphasis on facies analysis. Twelve facies, grouped in five facies associations, have been recognized in the Ametlla Formation. The studied succession records a vertical transition from deltaic systems prograding onto a sediment-starved shelf, via estuarine deposits associated with incised valleys, to sandbar complexes in a tidal seaway. In terms of sequence stratigraphy, three scales of genetic sedimentary units were recognized. (1) At the regional scale, elements of two 3rd-order composite sequences (sensu Exxon) have been recognized. These include a 3rd-order highstand sequence set encompassing the lowermost part of the Ametlla Formation and the underlying Passarella Formation, and a 3rd-order transgressive sequence set that constitutes the middle parts of the Ametlla Formation. The sequence sets are separated by an unconformity with up to 35 m of incision that is interpreted as a major sequence boundary. It is argued that the incised valleys associated with this unconformity were infilled during landward-stepping of the shelfal depositional system. Basinwards, the unconformable surface becomes subhorizontal and is overlain by a 2 m thick oyster bed formed in a sediment-starved setting subsequent to flooding of the incised valleys (which still acted as sediment conduits). Sandstones dominate the transgressive sequence set, whereas the highstand sequence set is dominated by siltstones, particularly in the lower part. In the transgressive sequence set, an upward increase in sand content and calibre is observed, relatable to punctuations of the transgressive trend by high-frequency sea-level fluctuations, and to downslope redistribution of sand. (2) At the subregional scale, detailed mapping indicates the presence of five 4th-order sequences. The 4th-order sequence boundaries are associated with sediment bypassing and minimal erosional relief, and were created by forced regressions during periods of relative sea-level fall. Sharp-based sandstones overlying these unconformities are believed to have accumulated during subsequent rise of relative sea-level. Where 4th-order maximum flooding surfaces can be recognized, the sequences may be subdivided into a sandstone-dominated transgressive systems tract and a siltstone-dominated highstand systems tract. (3) At the local scale, 2–9 5th-order parasequences are present within the 4th-order sequences. Superimposed parasequences are separated by flooding surfaces characterized by bioclastic accumulations, pervasive burrowing and extensive calcite cementation. The parasequences are commonly stacked in a landward-stepping manner.  相似文献   

3.
Well‐exposed Mesozoic sections of the Bahama‐like Adriatic Platform along the Dalmatian coast (southern Croatia) reveal the detailed stacking patterns of cyclic facies within the rapidly subsiding Late Jurassic (Tithonian) shallow platform‐interior (over 750 m thick, ca 5–6 Myr duration). Facies within parasequences include dasyclad‐oncoid mudstone‐wackestone‐floatstone and skeletal‐peloid wackestone‐packstone (shallow lagoon), intraclast‐peloid packstone and grainstone (shoal), radial‐ooid grainstone (hypersaline shallow subtidal/intertidal shoals and ponds), lime mudstone (restricted lagoon), fenestral carbonates and microbial laminites (tidal flat). Parasequences in the overall transgressive Lower Tithonian sections are 1–4·5 m thick, and dominated by subtidal facies, some of which are capped by very shallow‐water grainstone‐packstone or restricted lime mudstone; laminated tidal caps become common only towards the interior of the platform. Parasequences in the regressive Upper Tithonian are dominated by peritidal facies with distinctive basal oolite units and well‐developed laminate caps. Maximum water depths of facies within parasequences (estimated from stratigraphic distance of the facies to the base of the tidal flat units capping parasequences) were generally <4 m, and facies show strongly overlapping depth ranges suggesting facies mosaics. Parasequences were formed by precessional (20 kyr) orbital forcing and form parasequence sets of 100 and 400 kyr eccentricity bundles. Parasequences are arranged in third‐order sequences that lack significant bounding disconformities, and are evident on accommodation (Fischer) plots of cumulative departure from average cycle thickness plotted against cycle number or stratigraphic position. Modelling suggests that precessional sea‐level changes were small (several metres) as were eccentricity sea‐level changes (or precessional sea‐level changes modulated by eccentricity), supporting a global, hot greenhouse climate for the Late Jurassic (Tithonian) within the overall ‘cool’ mode of the Middle Jurassic to Early Cretaceous.  相似文献   

4.
Purbeckian carbonates in the Swiss and French Jura (Goldberg Formation, lower Berriasian) comprise shallow-subtidal, intertidal, supratidal, low-energy, high-energy, marine, brackish, freshwater, and hypersaline facies. These facies are arranged in small (0–2–1.5 m thick) sequences which display a dominant shallowing-upward component, and which form the fundamental units of the highly structured Purbeckian sedimentary record. Six types of small-scale sequences can be recognized. A: intertidal to supratidal overprinting of shallow lagoonal facies; B: algal-marsh sequence with frequent dolomitization; C: sabkha sequence, often associated with collapse breccia; D: tidal-flat sequence with desiccation features; E: lacustrine sequence; F: terrestrial overprinting of subtidal or intertidal facies. Episodic event deposits such as tempestites are superimposed] Thin transgressive beds which rework elements of the underlying facies are frequently found at the base of the sequences. Green marls and black pebbles are common at the top and indicate long subaerial exposure. The sequences are often incomplete, as subtidal facies may be absent, or their upper part can be eroded. Lateral facies changes are common, which is due to the very shallow and partly emergent Purbeckian platform where various depositional environments were juxtaposed. However, many sequence boundaries are well developed and can be correlated over large parts of the study area. The Purbeckian shallowing-upward sequences were generated by climatically controlled sea-level changes. Autocyclic processes occurred locally, but were overprinted by drops of sea-level affecting the entire platform. The small-scale sequences are most probably related to the 20 000-year cycle of the precession of the equinoxes. Larger sequences with usually well-developed emersion surfaces are attributed to the 100 000 and 400 000-year eccentricity cycles of the Earth's orbit. Identification and correlation of sequence boundaries makes it possible to set up a framework of isochronous surfaces (which often cut across facies boundaries), and thus to interpret in detail the palaeogeographic, sedimentological and diagenetic evolution of the Purbeckian peritidal carbonate environments.  相似文献   

5.
Based on detailed analyses of facies evolution and stacking pattern of Berriasian carbonate-dominated sections in the Swiss Jura Mountains, the Swiss Ultrahelvetic and the French Vocontian Trough, a high-resolution platform-to-basin correlation is proposed. Biostratigraphical tie points are furnished by ammonites, dinoflagellates, calpionellids, and ostracod-charophyte assemblages. The hierarchical stacking of small-scale depositional sequences reflects Milankovitch cyclicity: sequences corresponding to the 20-, 100-, and, locally, 400-ka orbital cycles can be identified. Elementary (20 ka) sequences on the platform generally consist of one bed of shallow subtidal to intertidal, high- or low-energy carbonate facies, whereas on the slope and in the basin they are commonly developed as limestone-marl couplets. These elementary sequences group into small-scale composite sequences reflecting the first orbital eccentricity cycle (100 ka), which in turn build up large-scale (3rd-order) composite sequences. One 3rd-order sequence has been analysed in detail: according to the cyclostratigraphic interpretation, it took ?2 Myr to form, which is in accordance with the duration of the corresponding ammonite subzones. Sequence-stratigraphic and cyclostratigraphic platform-to-basin correlation shows that for about 900 ka the platform was exposed or only partly flooded, whereas on the slope and in the basin, lowstand deposits with channel fills and slumps accumulated. With rising sea level, accommodation space gradually increased on the platform and a thickening-upward sequential pattern with transgressive facies developed, while in the basin the facies still had lowstand characteristics with thick and nodular limestone beds. This situation lasted about 700 ka. The following 300 ka were characterized by sediment starvation and increased bioturbation on the platform, and by more marly, transgressive sediments on the slope and in the basin. The maximum-flooding phase is more or less isochronous on the platform and in the basin, although the surface with the best-developed maximum-flooding features may be displaced by one or two small-scale composite sequences because of superimposed high-frequency sea-level fluctuations, and/or local variations in substrate morphology and sediment distribution. Third-order highstand conditions prevailed for only about 100 ka. The combination of cyclostratigraphy and high-resolution sequence stratigraphy, constrained by good biostratigraphy, is thus a powerful tool for detailed stratigraphical correlation over long distances and from one sedimentary environment to another.  相似文献   

6.
The Middle Triassic–Lower Cretaceous (pre-Late Albian) succession of Arif El-Naga anticline comprises various distinctive facies and environments that are connected with eustatic relative sea-level changes, local/regional tectonism, variable sediment influx and base-level changes. It displays six unconformity-bounded depositional sequences. The Triassic deposits are divided into a lower clastic facies (early Middle Triassic sequence) and an upper carbonate unit (late Middle- and latest Middle/early Late Triassic sequences). The early Middle Triassic sequence consists of sandstone with shale/mudstone interbeds that formed under variable regimes, ranging from braided fluvial, lower shoreface to beach foreshore. The marine part of this sequence marks retrogradational and progradational parasequences of transgressive- and highstand systems tract deposits respectively. Deposition has taken place under warm semi-arid climate and a steady supply of clastics. The late Middle- and latest Middle/early Late Triassic sequences are carbonate facies developed on an extensive shallow marine shelf under dry-warm climate. The late Middle Triassic sequence includes retrogradational shallow subtidal oyster rudstone and progradational lower intertidal lime-mudstone parasequences that define the transgressive- and highstand systems tracts respectively. It terminates with upper intertidal oncolitic packstone with bored upper surface. The next latest Middle/early Late Triassic sequence is marked by lime-mudstone, packstone/grainstone and algal stromatolitic bindstone with minor shale/mudstone. These lower intertidal/shallow subtidal deposits of a transgressive-systems tract are followed upward by progradational highstand lower intertidal lime-mudstone deposits. The overlying Jurassic deposits encompass two different sequences. The Lower Jurassic sequence is made up of intercalating lower intertidal lime-mudstone and wave-dominated beach foreshore sandstone which formed during a short period of rising sea-level with a relative increase in clastic supply. The Middle-Upper Jurassic sequence is represented by cycles of cross-bedded sandstone topped with thin mudstone that accumulated by northerly flowing braided-streams accompanying regional uplift of the Arabo–Nubian shield. It is succeeded by another regressive fluvial sequence of Early Cretaceous age due to a major eustatic sea-level fall. The Lower Cretaceous sequence is dominated by sandy braided-river deposits with minor overbank fines and basal debris flow conglomerate.  相似文献   

7.
Sediment production and accumulation on shallow carbonate platforms are controlled by allogenic, externally controlled processes (such as sea level, climate, and/or platform-wide subsidence patterns) as well as by autogenic factors that are inherent to the sedimentary system (such as lateral migration of sediment bodies). The challenge is to determine how and in which proportion these processes interacted to create the observed sedimentary record. Here, a case study of Middle Berriasian, shallow-marine carbonates of the Swiss and French Jura Mountains is presented. Based on vertical facies evolution and bedding surfaces, different orders of depositional sequences (elementary, small-scale, medium-scale) have been identified in the studied sections. The hierarchical stacking pattern of these sequences and the time span represented by the investigated interval imply that eustatic sea-level fluctuations in the Milankovitch frequency band were an important controlling factor. The small-scale and medium-scale sequences relate to the 100 and 400-kyr orbital eccentricity cycles, respectively. The elementary sequences are attributed to the 20-kyr precession cycle. Differential subsidence additionally produced accommodation changes. The present study focuses on one specific small-scale sequence situated at the base of the transgressive systems tract of large-scale sequence Be4, which is identified also in other European basins. This small-scale sequence has been logged in detail at eight different outcrops in the Jura Mountains. Detailed facies analysis reveals that different depositional environments (tidal flats, internal lagoons, open lagoons, carbonate sand shoals) were juxtaposed and evolved through time, often shifting position on the platform. The boundaries of the small-scale (100-kyr) sequence can be followed over the entire study area and thus must have formed through predominantly allogenic processes (eustatic sea-level fall, the effect of which was locally modified by differential subsidence). In two sections, five well-developed elementary sequences constitute the small-scale sequence. In the other sections, the identification of elementary sequences often is difficult because sedimentation was dominated by autogenic processes that overruled the influence of sea-level fluctuations. In low-energy, tidal-flat and internal-lagoonal settings, orbitally induced sea-level changes were recorded more faithfully, while high-energy shoals were mainly submitted to autogenic processes and the allogenic signal is masked. Consequently, the studied Jura platform experienced a combination of auto- and allogenic processes, which created a complex facies mosaic and a complex stacking of depositional sequences. Nevertheless, the 100-kyr orbital signal was strong enough to create correlatable sequence boundaries. Within a 100-kyr sequence, however, the unambiguous definition of sequences related to the 20-kyr orbital cycle is often difficult and the prediction of their lateral or vertical facies evolution impossible.  相似文献   

8.
Upper Callovian to Tithonian (late Jurassic) sediments represent an important hydrocarbon reservoir in the Kopet‐Dagh Basin, NE Iran. These deposits consist mainly of limestone, dolostone, and calcareous mudstone with subordinate siliciclastic interbeds. Detailed field surveys, lithofacies and facies analyses at three outcrop sections were used to investigate the depositional environments and sequence stratigraphy of the Middle to Upper Jurassic interval in the central and western areas of the basin. Vertical and lateral facies changes, sedimentary fabrics and structures, and geometry of carbonate bodies resulted in recognition of various carbonate facies related to tidal flats, back‐barrier lagoon, shelf‐margin/shelf‐margin reef, slope and deep‐marine facies belts. These facies were accompanied by interbedded beach and deep marine siliciclastic petrofacies. Field surveys, facies analysis, parasequences stacking patterns, discontinuity surfaces, and geometries coupled with relative depth variation, led to the recognition of six third‐order depositional sequences. The depositional history of the study areas can be divided into two main phases. These indicate platform evolution from a rimmed‐shelf to a carbonate ramp during the late Callovian–Oxfordian and Kimmeridgian–Tithonian intervals, respectively. Significant lateral and vertical facies and thickness changes, and results obtained from regional correlation of the depositional sequences, can be attributed to the combined effect of antecedent topography and differential subsidence related to local tectonics. Moreover, sea‐level changes must be regarded as a major factor during the late Callovian–Tithonian interval. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

9.
The Lower Jurassic Mashabba Formation crops out in the core of the doubly plunging Al-Maghara anticline, North Sinai, Egypt. It represents a marine to terrestrial succession deposited within a rift basin associated with the opening of the Neotethys. Despite being one of the best and the only exposed Lower Jurassic strata in Egypt, its sedimentological and sequence stratigraphic framework has not been addressed yet. The formation is subdivided informally into a lower and upper member with different depositional settings and sequence stratigraphic framework. The sedimentary facies of the lower member include shallow-marine, fluvial, tidal flat and incised valley fill deposits. In contrast, the upper member consists of strata with limited lateral extension including fossiliferous lagoonal limestones alternating with burrowed deltaic sandstones. The lower member contains three incomplete sequences (SQ1-SQ3). The depositional framework shows transgressive middle shoreface to offshore transition deposits sharply overlain by forced regressive upper shoreface sandstones (SQ1), lowstand fluvial to transgressive tidal flat and shallow subtidal sandy limestones (SQ2), and lowstand to transgressive incised valley fills and shallow subtidal sandy limestones (SQ3). In contrast, the upper member consists of eight coarsening-up depositional cycles bounded by marine flooding surfaces. The cycles are classified as carbonate-dominated, siliciclastic-dominated, and mixed siliciclastic-carbonate. The strata record rapid changes in accommodation space. The unpredictable facies stacking pattern, the remarkable rapid facies changes, and chaotic stratigraphic architecture suggest an interplay between allogenic and autogenic processes. Particularly syndepositional tectonic pulses and occasional eustatic sea-level changes controlled the rate and trends of accommodation space, the shoreline morphology, the amount and direction of siliciclastic sediment input and rapid switching and abandonment of delta systems.  相似文献   

10.
The origin of third-order depositional sequences remains debatable, and in many cases it is not clear whether they were controlled by tectonic activity and/or by eustatic sea-level changes. In Oxfordian and Berriasian–Valanginian carbonate-dominated sections of Switzerland, France, Germany and Spain, high-resolution sequence-stratigraphic and cyclostratigraphic analyses show that the sedimentary record reflects Milankovitch cyclicity. Orbitally induced insolation changes translated into sea-level fluctuations, which in turn controlled accommodation changes. Beds and bedsets formed in rhythm with the precession and 100-kyr eccentricity cycles, whereas the 400-kyr eccentricity cycle contributed to the creation of major depositional sequences. Biostratigraphical data allow the correlation of many of the 400-kyr sequence boundaries with third-order sequence boundaries recognized in European basins. This implies that climatically controlled sea-level changes contributed to the formation of third-order sequences. Furthermore, this cyclostratigraphical approach improves the relative dating of stratigraphic intervals.  相似文献   

11.
During the early Middle Devonian in South China, an extensive carbonate platform was broken up through extension to create a complex pattern of platforms, and interplatform basins. In Givetian and Frasnian carbonate successions, five depositional facies, including peritidal, restricted shallow subtidal, semi‐restricted subtidal, intermediate subtidal and deep subtidal facies, and 18 lithofacies units are recognized from measured sections on three isolated platforms. These deposits are arranged into metre‐scale, upward‐shallowing peritidal and subtidal cycles. Nine third‐order sequences are identified from changes in cycle stacking patterns, vertical facies changes and the stratigraphic distribution of subaerial exposure indicators. These sequences mostly consist of a lower transgressive part and an upper regressive part. Transgressive packages are dominated by thicker‐than‐average subtidal cycles, and regressive packages by thinner‐than‐average peritidal cycles. Sequence boundaries are transitional zones composed of stacked, high‐frequency, thinner‐than‐average cycles with upward‐increasing intensity of subaerial exposure, rather than individual, laterally traceable surfaces. These sequences can be further grouped into catch‐up and keep‐up sequence sets from the long‐term (second‐order) changes in accommodation and vertical facies changes. Catch‐up sequences are characterized by relatively thick cycle packages with a high percentage of intermediate to shallow subtidal facies, and even deep subtidal facies locally within some individual sequences, recording long‐term accommodation gain. Keep‐up sequences are characterized by relatively thin cycle packages with a high percentage of peritidal facies within sequences, recording long‐term accommodation loss. Correlation of long‐term accommodation changes expressed by Fischer plots reveals that during the late Givetian to early Frasnian increased accommodation loss on platforms coincided with increased accommodation gain in interplatform basins. This suggests that movement on faults resulted in the relative uplift of platforms and subsidence of interplatform basins. In the early Frasnian, extensive siliceous deposits in most interplatform basins and megabreccias at basin margins correspond to exposure disconformities on platforms.  相似文献   

12.
The evaporitic Hessian Zechstein Basin is a sub‐basin of the Southern Zechstein Basin, situated at its southern margin. Twelve facies groups were identified in the Zechstein Limestone and Lower Werra Anhydrite in order to better understand the sequence‐stratigraphic evolution of this sub‐basin, which contains economically important potassium salts. Four different paleogeographic depositional areas were recognized based on the regional distribution of facies. Siliciclastic‐carbonate, carbonate, carbonate‐evaporite and evaporite shallowing‐upward successions are developed. These allow the establishment of parasequences and sequences, as well as correlation throughout the Hessian Basin and into the Southern Zechstein Basin. Two depositional sequences are distinguished, Zechstein sequence 1 and Zechstein sequence 2. The former comprises the succession from the Variscan basement up to the lowermost part of the Werra Anhydrite, including the Kupferschiefer as part of the transgressive systems tract. The highstand systems tract is defined by the Zechstein Limestone, in which two parasequences are developed. In large parts of the Hessian Basin, Zechstein sequence 1 is capped by a karstic, subaerial exposure surface, interpreted as recording a type‐1 sequence boundary that formed during a distinct brine level fall. Low‐lying central areas (Central Hessian Sub‐basin, Werra Sub‐basin), however, were not exposed and show a correlative conformity. Topography was minimal at the end of sequence 1. Widely developed perilittoral, sabkha and salina shallowing‐upward successions indicate a renewed rise of brine level (interpreted as a transgressive systems tract), because of inflow of preconcentrated brines from the Southern Zechstein Basin to the north. This marks the initiation of Zechstein sequence 2, which comprises most of the Lower Werra Anhydrite. In the Central Hessian Sub‐basin, situated proximal to the brine inflow and on the ridges within the Hessian Basin, physico‐chemical conditions were well suited for sulphate precipitation to form a thick cyclic succession. It consists of four parasequences that completely filled the increased accommodation space. In contrast, only minor sulphate accumulation occurred in the Werra Sub‐basin, situated further southwards and distal to the inflow. As a result of substantially different sulphate precipitation rates during increased accommodation, water depth in the region became more variable. The Werra Sub‐basin, characterized by very low sedimentation rates, became increasingly deeper through time, trapping dense halite brines and precipitating rock salt deposits (Werra Halite). This ‘self‐organization’ model for an evaporitic basin, in which depositional relief evolves with sedimentation and relief is filled by evaporite thereafter, contradicts earlier interpretations, that call upon the existence of a tectonic depression in the Werra area, which controlled sedimentation from the beginning of the Zechstein.  相似文献   

13.
The Lower Cenomanian Bahariya Formation corresponds to a second-order depositional sequence that formed within a continental shelf setting under relatively low-rate conditions of positive accommodation (< 200 m during 3–6 My). This overall trend of base-level rise was interrupted by three episodes of base-level fall that resulted in the formation of third-order sequence boundaries. These boundaries are represented by subaerial unconformities (replaced or not by younger transgressive wave ravinement surfaces), and subdivide the Bahariya Formation into four third-order depositional sequences.

The construction of the sequence stratigraphic framework of the Bahariya Formation is based on the lateral and vertical changes between shelf, subtidal, coastal and fluvial facies, as well as on the nature of contacts that separate them. The internal (third-order) sequence boundaries are associated with incised valleys, which explain (1) significant lateral changes in the thickness of incised valley fill deposits, (2) the absence of third-order highstand and even transgressive systems tracts in particular areas, and (3) the abrupt facies shifts that may occur laterally over relatively short distances. Within each sequence, the concepts of lowstand, transgressive and highstand systems tracts are used to explain the observed lateral and vertical facies variability.

This case study demonstrates the usefulness of sequence stratigraphic analysis in understanding the architecture and stacking patterns of the preserved rock record, and helps to identify 13 stages in the history of base-level changes that marked the evolution of the Bahariya Oasis region during the Early Cenomanian.  相似文献   


14.
The Eocene Trihueco Formation is one of the best exposed successions of the Arauco Basin in Chile. It represents a period of marine regression and transgression of second-order duration, during which barrier island complexes developed on a muddy shelf. The strata are arranged in classical shoaling-upward parasequences of shoreface and beach facies capped by coal-bearing, back-barrier lagoon deposits. These fourth-order cycles are superimposed upon third-order cycles which caused landward and seaward shifts of the coastal facies belts. The final, punctuated rise in sea level is represented by shelf mudrocks with transgressive incised shoreface sandstones. Relative sea-level oscillations as revealed in the stratigraphy of the Trihueco Formation show a reasonable correlation with published Eocene eustatic curves.  相似文献   

15.
Sequence stratigraphic interpretation of paralic successions is complicated by the complex interfingering of marine and continental strata. The successions may also include terrestrial extensions of marine parasequences and completely independent lacustrine parasequence analogues. Failure in recognizing the possible interbeddding of these two independent parasequence types may lead to construction of sequence stratigraphic schemes based on incompatible data sets. We have studied a Lower Jurassic paralic section from the Baltic island of Bornholm, situated in the Tornquist Zone, which demarcates the transition from the stable Precambrian Baltic Shield to the subsiding Danish Basin and Danish-Polish Trough. The Hettangian-Sinemurian Sose Bugt Member (Rønne Formation) of Bornholm includes lacustrine, fluvial and restricted marine, estuarine deposits reflecting the basin-margin position. Biostatigraphic resolution is poor and a sequence stratigraphic interpretation of the paralic succession is far from straightforward. A multidisciplinary approach including facies analysis, recognition and lateral trading of key surfaces, palynostratigraphy, palynofacies, coal petrography, palaeopedology, clay mineralogy and source rock geochemistry is applied in order to obtain a high degree of precision in the interpretation of the paralic facies. In this way four sequences are recognized in the overall backstepping lacustrine to estuarine succession. Marine and marginal marine parasequences are distinguished from their purely lacustrine analogues, and an internally consistent sequence stratigraphic scheme is proposed. This is compared and tentatively correlated with fossiliferous marine sediments in the Danish Basin and with published eustatic cycle charts.  相似文献   

16.
西藏北部雁石坪地区晚巴柔—早巴通期玛托组是一个以砂岩、泥岩为主夹少量灰岩组成的混积型陆棚环境的沉积。含有介壳的凝缩段、下超面及沟蚀面,它们是划分体系域的关键界面。体系域具有二元结构特征,即海侵—高水位体系域,且TST沉积旋回厚度>HST,准层序类型有3种,分别是以砂岩为主的准层序、以泥岩为主的准层序和以潮坪体系向上变浅的准层序,准层序叠置构成进积型和退积型准层序组。采用沉积体系分析方法,初步建立研究区玛托组相对海平面变化曲线,并与藏南及全球海平面曲线进行对比分析,结合碳、氧同位素和磁化率资料,探讨研究区晚巴柔—早巴通期玛托组海平面变化控制因素。研究认为全球海平面变化控制了雁石坪地区晚巴柔早期海平面变化,而班公湖—怒江逢合带向北俯冲构造活动引起的区域洋盆容积变化是晚巴柔晚期—早巴通期海平面变化的主要因素。  相似文献   

17.
The history of Middle to Late Miocene evolution of the Transylvanian Basin was determined by the bordering Carpathian orogen evolution, the tectonic events being well recorded by the sedimentary history. The basin evolved in a back-arc setting, under a regional, compressional stress field. The major tectonic events produced during the Late Sarmatian and Post-Pannonian were related to the reactivation of the pre-Badenian fault systems. The Transylvanian Basin got uplifted after the Late Pannonian (? during the Pliocene), and at least 500 m of sedimentary cover was eroded.

Based on seismic and well-log interpretation, core and outcrop sedimentology, and microfauna, eight sequences were defined. The early Middle Miocene sequences are roughly synchronous to five 3rd order global sea-level cycles. Most of the recognized sequence boundaries are enhanced by regional tectonic events. The sedimentary evolution was also strongly influenced by salt-tectonics, active starting with the Late Sarmatian.

Two sequences were identified in the Lower Badenian deposits. The third sequence (late Early Badenian to early Mid Badenian) preserves information about deeper shelf settings. The lowstand of the following sequence was responsible for the deposition of the salt formation (late Mid Badenian), an important lithostratigraphic marker in the sedimentary record of the basin. In general, the Upper Badenian deposits (parts of the 4th and 5th sequences) belong to deep marine submarine fan systems. The Sarmatian (partially 5th, 6th and partially 7th sequences) was characterized by diverse salinity conditions, stretching from brackish to hypersaline, and by high tectonic instability, which induced several significant relative sea-level falls. During that time, deltaic (north) and fandeltaic (east) systems fed submarine fans, stacked between salt-related submarine heights (“channeled” deep-marine depocenters). Most of the Pannonian deposits (partially 7th and 8th sequences) belong to submarine fan systems, but shallower facies were also found in the western and eastern part of the basin.  相似文献   


18.
在前人岩石地层、生物地层、年代地层研究基础上,作者运用层序地层学理论结合沉积微相分析,对柯坪地区中下奥陶统露头碳酸盐岩进行了层序地层解剖。研究区共识别出二种界面类型 (暴露层序不整合界面和淹没层序不整合界面 )、三种准层序组构特征 (潮坪、浅滩和滩下陆棚 )和两种主要类型的体系域构成 (海侵体系域和高位体系域 ),在此基础上把该套碳酸盐岩划分为 7个三级层序,其中Sq1～ 2对应于蓬莱坝组地层、Sq3～ 6对应于鹰山组地层和Sq7对应于大湾沟组地层。Sq1～ 2三级层序由潮坪旋回的藻纹层白云岩、细粉晶白云岩和灰岩组成;Sq3～ 4三级层序由潮坪旋回的藻纹层灰岩和颗粒灰岩组成;Sq5～ 6三级层序由潮下浅滩相旋回的颗粒灰岩组成;Sq7三级层序由滩下陆棚环境藻灰岩和泥质瘤状灰岩组成  相似文献   

19.
The Quilalar Formation and correlative Mary Kathleen Group in the Mount Isa Inlier, Australia, conformably overlie rift-related volcanics and sediments and non-conformably overlie basement rocks. They represent a thermal-relaxation phase of sedimentation between 1780 and 1740 Ma. Facies analysis of the lower siliciclastic member of the Quilalar Formation and the coeval Ballara Quartzite permits discrimination of depositional systems that were restricted areally to either N-S-trending marginal platform or central trough palaeogeographic settings. Four depositional systems, each consisting of several facies, are represented in the lower Quilalar Formation-Ballara Quartzite; these are categorized broadly as storm-dominated shelf (SDS), continental (C), tide-dominated shelf (TDS) and wave-dominated shoreline (WDS). SDS facies consist either of black pyritic mudstone intervals up to 10 m thick, or mudstone and sandstone associated in 6–12-m-thick, coarsening-upward parasequences. Black mudstones are interpreted as condensed sections that developed as a result of slow sedimentation in an outer-shelf setting starved of siliciclastic influx. Vertical transition of facies in parasequences reflects flooding followed by shoaling of different shelf subenvironments; the shoreface contains evidence of subaerial exposure. Continental facies consist of fining-upward parasequences of fluvial origin and tabular, 0·4–4-m-thick, aeolian parasequences. TDS facies are represented by stacked, tabular parasequences between 0·5 and 5 m thick. Vertical arrangement of facies in parasequences reflects flooding and establishment of a tidal shelf followed by shoaling to intertidal conditions. WDS facies are preserved in 0·5–3-m-thick, stacked, tabular parasequences. Vertical transition of facies reflects initial flooding with wave reworking of underlying arenites along a ravinement surface, followed by shoaling from lower shoreface to foreshore conditions. Parasequences are stacked in retrogradational and progradational parasequence sets. Retrogradational sets consist of thin SDS parasequences in the trough, and C, TDS and probably WDS parasequences on the platforms. Thick SDS parasequences in the trough, and TDS, subordinate C and probably WDS parasequences on the platforms make up progradational parasequence sets. Depositional systems are associated in systems tracts that make up 40–140-m-thick sequences bounded by type-2 sequence boundaries that are disconformities. Transgressive systems tracts consist of C, TDS and probably WDS depositional systems on the platforms and the SDS depositional system and suspension mudstone deposits in the trough. The transgressive systems tract is characterized by retrogradational parasequence sets and developed in response to accelerating rates of sea-level rise following lowstand. Condensed-section deposits in the trough, and the thickest TDS parasequences on the platforms reflect maximum rates of sea-level rise and define maximum flooding surfaces. Highstand systems tract deposits are progradational. Early highstand systems tracts are represented by TDS and probably WDS depositional systems on the platforms and suspension mudstone deposits in the trough and reflect decreasing rates of sea-level rise. Later highstand systems tracts consist of the progradational SDS depositional system in the trough and, possibly, thin continental facies on the platforms. This stage of sequence development is related to slow rates of sea-level rise, stillstand and slow rates of fall. Lowstand deposits of shelf-margin systems tracts are not recognized but may be represented by shoreface deposits at the top of progradational SDS parasequence sets.  相似文献   

20.
Intracontinental subduction of the South China Block below the North China Block in the Late Triassic resulted in formation of the transpressional Sichuan foreland basin on the South China Block. The Upper Triassic Xujiahe Formation was deposited in this basin and consists of an eastward-tapering wedge of predominantly continental siliciclastic sedimentary rocks that are up to 3.5 km thick in the western foredeep depocenter and thin onto the forebulge and into backbulge depocenters.Five facies associations (A–E) make up the Xujiahe Formation and these are interpreted, respectively, as alluvial fan, transverse and longitudinal braided river, meandering river, overbank or shallow lacustrine, and deltaic deposits. This study establishes a sequence stratigraphic framework for the Xujiahe Formation which is subdivided into four sequences (SQ1, 2, 3 and 4). Sequence boundaries are recognized on the basis of facies-tract dislocations and associated fluvial rejuvenation and incision, and systems tracts are identified based on their constituent facies associations and changes in architectural style and sediment body geometries. Typical sequences consist of early to late transgressive systems tract deposits related to a progressive increase in accommodation and represented by Facies Associations A, B and C that grade upwards into Facies Association D. Regionally extensive and vertically stacked coal seams define maximum accommodation and are overlain by early highstand systems tract deposits represented by Facies Associations D, E and C. Late highstand systems tract deposits are rare because of erosion below sequence boundaries. Sequence development in the Xujiahe Formation is attributed to active and quiescent phases of thrust-loading events and is closely related to the tectonic evolution of the basin. The Sichuan Basin experienced three periods of thrust loading and lithospheric flexure (SQ1, lower SQ2 and SQ3), two periods of stress relaxation and basin widening (upper SQ 2 and SQ3) and one phase of isostatic rebound (SQ4). Paleogeographic reconstruction of the Sichuan Basin in the Late Triassic indicates that the Longmen Mountains to the west, consisting of metamorphic, sedimentary and pre-Neoproterozoic basement granitoid rocks, was the major source of sediment to the foredeep depocenter. Subordinate sediment sources were the Xuefeng Mountains to the east to backbulge depocenters, and the Micang Mountains to the northwest during the late history of the basin. This study has demonstrated the viability of sequence stratigraphic analysis in continental successions in a foreland basin, and the influence of thrust loading on sequence development.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号