首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 515 毫秒
1.
Mineral equilibria calculations in the system K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3 (KFMASHTO) using thermocalc and its internally consistent thermodynamic dataset constrain the effect of TiO2 and Fe2O3 on greenschist and amphibolite facies mineral equilibria in metapelites. The end‐member data and activity–composition relationships for biotite and chloritoid, calibrated with natural rock data, and activity–composition data for garnet, calibrated using experimental data, provide new constraints on the effects of TiO2 and Fe2O3 on the stability of these minerals. Thermodynamic models for ilmenite–hematite and magnetite–ulvospinel solid solutions accounting for order–disorder in these phases allow the distribution of TiO2 and Fe2O3 between oxide minerals and silicate minerals to be calculated. The calculations indicate that small to moderate amounts of TiO2 and Fe2O3 in typical metapelitic bulk compositions have little effect on silicate mineral equilibria in metapelites at greenschist to amphibolite facies, compared with those calculated in KFMASH. The addition of large amounts of TiO2 to typical pelitic bulk compositions has little effect on the stability of silicate assemblages; in contrast, rocks rich in Fe2O3 develop a markedly different metamorphic succession from that of common Barrovian sequences. In particular, Fe2O3‐rich metapelites show a marked reduction in the stability fields of staurolite and garnet to higher pressures, in comparison to those predicted by KFMASH grids.  相似文献   

2.
An Al‐rich, SiO2‐deficient sapphirine–garnet‐bearing rock occurs as a metapelitic boudin within granulite facies Proterozoic charnockitic gneisses and migmatites on the island of Hisøy, Bamble Sector, SE Norway. The boudin is made up of peraluminous sapphirine, garnet, corundum, spinel, orthopyroxene, sillimanite, cordierite, staurolite and biotite in a variety of assemblages. Thermobarometric calculations based on coexisting sapphirine–spinel, garnet–corundum–spinel–sillimanite, sapphirine–orthopyroxene, and garnet–orthopyroxene indicate peak‐metamorphic conditions near to 930 °C at 10 kbar. Corundum occurs as single 200 to 3000 micron sized skeletal crystal intergrowths in cores of optically continuous pristine garnet porphyroblasts. Quartz occurs as 5–60 micron‐sized euhedral to lobate inclusions in the corundum where it is in direct contact with the corundum with no evidence of a reaction texture. Some crystal inclusions exhibit growth zoning, which indicates that textural equilibrium was achieved. Electron Back‐Scatter Diffraction (EBSD) studies reveal that the quartz inclusions share a common c‐axis with the host corundum crystal. The origin of the quartz inclusions in corundum is enigmatic as recent experimental studies have confirmed the instability of quartz–corundum over geologically realistic P–T ranges. The combined EBSD and textural observations suggest the presence of a former silica‐bearing proto‐corundum, which underwent exsolution during post‐peak‐metamorphic uplift and cooling. Exsolution of quartz in corundum is probably confined to fluid‐absent conditions where phase transitions by coupled dissolution–precipitation mechanisms are prevented.  相似文献   

3.
The activity–composition (ax) relations of sapphirine are re‐evaluated in the light of a recent new internally‐consistent data set of phase end‐members for use in phase equilibria modelling, particularly of ultra‐high‐temperature (UHT) rocks. This is achieved with the aid of relatively oxidized sapphirine+quartz‐bearing granulites from Wilson Lake, Canada. Calculated PT projections and compatibility diagrams in the K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3 (KFMASHTO) system are used to illustrate sapphirine+quartz‐bearing phase equilibria in the context of UHT metamorphism. These new ax relations for sapphirine should allow pseudosection thermobarometry in NCKFMASHTO for estimating peak PT conditions of sapphirine‐bearing rocks.  相似文献   

4.
Anatectic migmatites in medium- to low-pressure granulite facies metasediments exposed in the Larsemann Hills, East Antarctica, contain leucosomes with abundant quartz and plagioclase and minor interstitial K-feldspar, and assemblages of garnet–cordierite–spinel–ilmenite–sillimanite. Qualitative modelling in the system K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O2, in conjunction with various PT calculations indicate that the high-grade retrograde evolution of the terrane was dominated by decompression from peak conditions of c. 7 kbar at c. 800 °C to 4–5 kbar at c. 750 °C. Extensive partial melting during decompression involved the replacement of biotite by the assemblage cordierite–garnet–spinel within the leucosomes. These leucosomes represent the site of partial melt generation, the cordierite–garnet–spinel–ilmenite assemblage representing the solid products and excess reactants from the melting reaction. The extraction and accumulation of this decompression-generated melt led to the formation of syntectonic pegmatites and extensive granitic plutons. Leucosome development and terrane decompression proceeded during crustal transpression, synchronous with upper crustal extension, during a progressive Early Palaeozoic collisional event. Subsequent retrograde evolution was characterized by cooling, as indicated by the growth of biotite replacing spinel and garnet, thin mantles of cordierite replacing spinel and quartz within metapelites, and garnet replacing orthopyroxene and hornblende within metabasites. P–T calculations on late mylonites indicate lower grade conditions of formation of c. 3.5 kbar at c. 650 °C, consistent with the development of late cooling textures.  相似文献   

5.
The island of Seram, part of the northern limb of the Banda Arc in eastern Indonesia, exposes an extensive Mio‐Pliocene granulite facies migmatite complex (the Kobipoto Complex) comprising voluminous leucosome‐rich diatexites and scarcer Al–Fe‐rich residual granulites. The migmatites are intimately associated with ultramafic rocks of predominantly lherzolitic composition that were exhumed by substantial lithospheric extension beneath low‐angle detachment faults; heat supplied by the lherzolites was evidently a major driver for the granulite facies metamorphism and accompanying anatexis. Residual garnet–sillimanite granulites sampled from the Kobipoto Mountains, central Seram, contain scarce garnet‐hosted inclusions of hercynite spinel (~1.5 wt% ZnO) + quartz (± ilmenite) in direct grain‐boundary contact – an assemblage potentially indicative of metamorphism under ultrahigh‐temperature (UHT) conditions. thermocalc ‘Average PT’ reactions and melanosome‐specific thermocalc , TMO, and PT pseudosections in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3 (NCKFMASHTO) chemical system, supported by Ti‐in‐garnet thermobarometry, are permissive of the rock having experienced a clockwise PT path peaking at 925 °C and 9 kbar – thus narrowly reaching UHT conditions – before undergoing near‐isothermal decompression to ~750 °C and ~4 kbar. Spinel + quartz assemblages are interpreted to have formed at or just after the metamorphic peak from localized reactions between sillimanite, ilmenite and surrounding garnet. Further decompression of the rock resulted in the formation of complex reaction microstructures comprising cordierite ± plagioclase coronae around garnet, and symplectic intergrowths of cordierite + spinel + ilmenite around sillimanite. Small grains of sapphirine + corundum developed subsequently within spinel by localized quartz‐absent reactions. The post‐peak evolution of the granulites may be related to previously published U–Pb zircon and 40Ar/39Ar ages of c. 16 Ma, further substantiating the claim for the Kobipoto Complex granulites having recorded Earth's youngest‐identified episode of UHT metamorphism, albeit at slightly lower temperature and higher pressure than previously inferred. The Kobipoto Complex granulites demonstrate how UHT conditions may be achieved in the ‘modern’ Earth by extreme lithospheric extension, which, in this instance, was driven by slab rollback of the Banda Arc.  相似文献   

6.
A new quantitative approach to constraining mineral equilibria in sapphirine‐bearing ultrahigh‐temperature (UHT) granulites through the use of pseudosections and compatibility diagrams is presented, using a recently published thermodynamic model for sapphirine. The approach is illustrated with an example from an UHT locality in the Anápolis–Itauçu Complex, central Brazil, where modelling of mineral equilibria indicates peak metamorphic conditions of about 9 kbar and 1000 °C. The early formed, coarse‐grained assemblage is garnet–orthopyroxene–sillimanite–quartz, which was subsequently modified following peak conditions. The retrograde pressure–temperature (PT) path of this locality involves decompression across the FeO–MgO–Al2O3–SiO2 (FMAS) univariant reaction orthopyroxene + sillimanite = garnet + sapphirine + quartz, resulting in the growth of sapphirine–quartz, followed by cooling and recrossing of this reaction. The resulting microstructures are modelled using compatibility diagrams, and pseudosections calculated for specific grain boundaries considered as chemical domains. The sequence of microstructures preserved in the rocks constrains a two‐stage isothermal decompression–isobaric cooling path. The stability of cordierite along the retrograde path is examined using a domainal approach and pseudosections for orthopyroxene–quartz and garnet–quartz grain boundaries. This analysis indicates that the presence or absence of cordierite may be explained by local variation in aH2O. This study has important implications for thermobarometric studies of UHT granulites, mainly through showing that traditional FMAS petrogenetic grids based on experiments alone may overestimate PT conditions. Such grids are effectively constant aH2O sections in FMAS‐H2O (FMASH), for which the corresponding aH2O is commonly higher than that experienced by UHT granulites. A corollary of this dependence of mineral equilibria on aH2O is that local variations in aH2O may explain the formation of cordierite without significant changes in PT conditions, particularly without marked decompression.  相似文献   

7.
Corundum+quartz-bearing assemblages occur in small lenses in granulite facies metapelites in Rayagada, north-central part of the Eastern Ghats Granulite Belt, India. Corundum porphyroblasts and quartz coexist with porphyroblastic almandine-rich garnet, hercynite spinel, ilmenite and magnetite. Corundum and quartz are separated by sillimanite or a composite corona consisting of sillimanite and garnet, whereas corundum shows sharp grain boundaries with spinel, ilmenite and magnetite. Porphyroblastic corundum contains prismatic sillimanite inclusions in which irregularly shaped quartz is enclosed. Two distinct reactions are inferred from the textural features: corundum+quartz=sillimanite and spinel+quartz=garnet+sillimanite. From the petrographical features, we infer that corundum–quartz–garnet–spinel was the peak metamorphic assemblage. Although large uncertainties exist regarding the positions of the respective reactions in P–T  space, from several published experimental results and theoretical calculations a peak metamorphic condition of 12  kbar and 1100  °C is estimated as the lower stability limit of the corundum–quartz assemblage. Decompression from the peak P–T  condition to c .  9  kbar, 950  °C is inferred.  相似文献   

8.
The reaction muscovite+cordierite→biotite+Al2SiO5 +quartz+H2O is of considerable importance in the low pressure metamorphism of pelitic rocks: (1) its operation is implied in the widespread assemblage Ms + Crd +And± Sil + Bt + Qtz, a common mineral assemblage in contact aureoles and low pressure regional terranes; (2) it is potentially an important equilibrium for pressure estimation in low pressure assemblages lacking garnet; and (3) it has been used to distinguish between clockwise and anticlockwise P–T paths in low pressure metamorphic settings. Experiments and thermodynamic databases provide conflicting constraints on the slope and position of the reaction, with most thermodynamic databases predicting a positive slope for the reaction. Evidence from mineral assemblages and microtextures from a large number of natural prograde sequences, in particular contact aureoles, is most consistent with a negative slope (andalusite and/or sillimanite occurs upgrade of, and may show evidence for replacement of, cordierite). Mineral compositional trends as a function of grade are variable but taken as a whole are more consistent with a negative slope than a positive slope. Thermodynamic modelling of reaction 1 and associated equilibria results in a low pressure metapelitic petrogenetic grid in the system K2O–FeO–MgO–Al2O3–SiO2–H2O (KFMASH) which satisfies most of the natural and experimental constraints. Contouring of the Fe–Mg divariant interval represented by reaction 1 allows for pressure estimation in garnet‐absent andalusite+cordierite‐bearing schists and hornfelses. The revised topology of reaction 1 allows for improved analysis of P–T paths from mineral assemblage sequences and microtextures in the same rocks.  相似文献   

9.
Eclogite boudins occur within an orthogneiss sheet enclosed in a Barrovian metapelite‐dominated volcano‐sedimentary sequence within the Velké Vrbno unit, NE Bohemian Massif. A metamorphic and lithological break defines the base of the eclogite‐bearing orthogneiss nappe, with a structurally lower sequence without eclogite exposed in a tectonic window. The typical assemblage of the structurally upper metapelites is garnet–staurolite–kyanite–biotite–plagioclase–muscovite–quartz–ilmenite ± rutile ± silli‐manite and prograde‐zoned garnet includes chloritoid–chlorite–paragonite–margarite, staurolite–chlorite–paragonite–margarite and kyanite–chlorite–rutile. In pseudosection modelling in the system Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O (NCKFMASH) using THERMOCALC, the prograde path crosses the discontinuous reaction chloritoid + margarite = chlorite + garnet + staurolite + paragonite (with muscovite + quartz + H2O) at 9.5 kbar and 570 °C and the metamorphic peak is reached at 11 kbar and 640 °C. Decompression through about 7 kbar is indicated by sillimanite and biotite growing at the expense of garnet. In the tectonic window, the structurally lower metapelites (garnet–staurolite–biotite–muscovite–quartz ± plagioclase ± sillimanite ± kyanite) and amphibolites (garnet–amphibole–plagioclase ± epidote) indicate a metamorphic peak of 10 kbar at 620 °C and 11 kbar and 610–660 °C, respectively, that is consistent with the other metapelites. The eclogites are composed of garnet, omphacite relicts (jadeite = 33%) within plagioclase–clinopyroxene symplectites, epidote and late amphibole–plagioclase domains. Garnet commonly includes rutile–quartz–epidote ± clinopyroxene (jadeite = 43%) ± magnetite ± amphibole and its growth zoning is compatible in the pseudosection with burial under H2O‐undersaturated conditions to 18 kbar and 680 °C. Plagioclase + amphibole replaces garnet within foliated boudin margins and results in the assemblage epidote–amphibole–plagioclase indicating that decompression occurred under decreasing temperature into garnet‐free epidote–amphibolite facies conditions. The prograde path of eclogites and metapelites up to the metamorphic peak cannot be shared, being along different geothermal gradients, of about 11 and 17 °C km?1, respectively, to metamorphic pressure peaks that are 6–7 kbar apart. The eclogite–orthogneiss sheet docked with metapelites at about 11 kbar and 650 °C, and from this depth the exhumation of the pile is shared.  相似文献   

10.
Mineral textures in metapelitic granulites from the northern Prince Charles Mountains, coupled with thermodynamic modelling in the K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3 (KFMASHTO) model system, point to pressure increasing with increasing temperature on the prograde metamorphic path, followed by retrograde cooling (i.e. an anticlockwise P–T path). Textural evidence for the increasing temperature part of the path is given by the breakdown of garnet and biotite to form orthopyroxene and cordierite in sillimanite‐absent rocks, and through the break‐down of biotite and sillimanite to form spinel, cordierite and garnet in more aluminous assemblages. This is equated to the advective addition of heat from the regional emplacement of granitic and charnockitic magmas dated at c. 980 Ma. A subsequent increase in pressure, inferred from the break‐down of spinel and quartz to sillimanite, cordierite and garnet in aluminous rocks, is attributed to crustal thickening related to upright folding dated at 940–910 Ma. The terrane attained peak metamorphic temperatures of c. 880 °C at pressures of c. 6.0–6.5 kbar during this event. Subsequent cooling is inferred from the localised breakdown of cordierite and garnet to form biotite and sillimanite that developed in the latter stages of the same event. The textural observations described are interpreted via the application of P–T and P–T–X pseudosections. The latter show that most rock compositions preserve only fragments of the overall P–T path; a result of different rock compositions undergoing mineral assemblage changes, or changes in mineral modal abundance, on different sections of the P–T path. The results also suggest that partial melting during granulite facies metamorphism, coupled with melt loss and dehydration, initiated a switch from pervasive ductile, to discrete ductile/brittle deformation, during retrograde cooling.  相似文献   

11.
The recent publication of an updated thermodynamic dataset for petrological calculations provides an opportunity to illustrate the relationship between experimental data and the dataset, in the context of a new set of activity–composition models for several key minerals. These models represent orthopyroxene, clinopyroxene and garnet in the system CaO–MgO–Al2O3–SiO2 (CMAS), and are valid up to 50 kbar and at least 1800 °C; they are the first high‐temperature models for these phases to be developed for the Holland & Powell dataset. The models are calibrated with reference to phase‐relation data in the subsystems CaO–MgO–SiO2 (CMS) and MgO–Al2O3–SiO2 (MAS), and will themselves form the basis of models in larger systems, suitable for calculating phase equilibria in the crust and mantle. In the course of calibrating the models, it was necessary to consider the reaction orthopyroxene + clinopyroxene + spinel = garnet + forsterite in CMAS, representing a univariant transition between simple spinel and garnet lherzolite assemblages. The high‐temperature segment of this reaction has been much disputed. We offer a powerful thermodynamic argument relating this reaction to the equivalent reaction in MAS, that forces us to choose between good model fits to the data in MAS or to the more recent data in CMAS. We favour the fit to the MAS data, preserving conformity with a large body of experimental and thermodynamic data that are incorporated as constraints on the activity–composition modelling via the internally consistent thermodynamic dataset.  相似文献   

12.
The equilibrium coexistence of sapphirine + quartz is inferred to record temperatures in excess of 980 °C, based on the stability of this assemblage in the simplified chemical system FeO–MgO–Al2O3–SiO2 (FMAS) system. However, the potential for sapphirine to contain significant Fe3+ suggests that the stability of sapphirine + quartz could extend to lower temperatures than those constrained in this ideal system. The Wilson Lake terrane in the Grenville Province of central Labrador preserves sapphirine + quartz‐bearing assemblages in highly oxidized bulk compositions, and provides an opportunity to explore the stability of sapphirine + quartz in such rock compositions within the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O (NCKFMASHTO) chemical system. Starting with the phase equilibria in FeO–MgO–Al2O3–SiO2–TiO2–O (FMASTO), expansion into K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O (KFMASHTO) allows the effect of the stability of the additional phases, biotite, K‐feldspar and melt, on the stability of sapphirine + quartz to be assessed. These phase relations are evaluated generally using P–T projections, and the ultimate extension into NCKFMASHTO is done with pseudosections. Conditions of peak metamorphism in the Wilson Lake terrane are constrained using P–T pseudosections, and the appropriate H2O and O contents to use in the modelled compositions are investigated using T–MH2O and T–MO pseudosections. The peak P–T estimates from a sapphirine + quartz‐bearing sample are ~960 to 935 °C at ~10 to 8.6 kbar, similar to estimates from orthopyroxene + sillimanite + quartz ± garnet‐bearing samples. Whereas the sapphirine + quartz‐bearing sample is more Fe‐rich than the orthopyroxene + sillimanite‐bearing sample on an all‐Fe‐as‐FeO basis, once the oxidation state is taken into account, the former is effectively more magnesian than the latter, accounting for the sapphirine occurrence.  相似文献   

13.
Granulite facies magnesian metapelites commonly preserve a wide array of mineral assemblages and reaction textures that are useful for deciphering the metamorphic evolution of a terrane. Quantitative pressure, temperature and bulk composition constraints on the development and preservation of characteristic peak granulite facies mineral assemblages such as orthopyroxene + sillimanite + quartz are assessed with reference to calculated phase diagrams. In NCKFMASH and its chemical subsystems, peak assemblages form mainly in high‐variance fields, and most mineral assemblage changes reflect multivariant equilibria. The rarity of orthopyroxene–sillimanite–quartz‐bearing assemblages in granulite facies rocks reflects the need for bulk rock XMg of greater than approximately 0.60–0.65, with pressures and temperatures exceeding c. 8 kbar and 850 °C, respectively. Cordierite coronas mantling peak minerals such as orthopyroxene, sillimanite and quartz have historically been used to infer isothermal decompression P–T paths in ultrahigh‐temperature granulite facies terranes. However, a potentially wide range of P–T paths from a given peak metamorphic condition facilitate retrograde cordierite growth after orthopyroxene + sillimanite + quartz, indicating that an individual mineral reaction texture is unable to uniquely define a P–T vector. Therefore, the interpretation of P–T paths in high‐grade rocks as isothermal decompression or isobaric cooling may be overly simplistic. Integration of quantitative data from different mineral reaction textures in rocks with varying bulk composition will provide the strongest constraints on a P–T path, and in turn on tectonic models derived from these paths.  相似文献   

14.
Metapelitic granulites from the Anosyen domain of southeastern Madagascar are exposed in three intercalated formations: the Amparihy, Bakika and Ihosy formations. Although mineralogically distinct from each other, the rocks from these formations show very similar bulk‐rock compositions when measured on a FeT basis. The preserved mineral assemblages thus do not reflect differences in the ratios of the main rock‐forming oxides (i.e. Al2O3:FeT:MgO), but instead reflect variations in the pre‐metamorphic oxidation state of the protolith rocks. These differences in oxidation state are manifested via differences in iron speciation – either Fe+2 or Fe+3. The relatively reduced rocks of the Amparihy Formation preserve the assemblage bi–sp–sill–g–cd, which contrasts markedly with the mostly garnet and spinel‐absent bi–cd–sill–mt assemblages preserved in the strongly oxidized rocks of the Ihosy Formation. Compositionally intermediate rocks of the Bakika Formation are garnet bearing, but sillimanite‐absent, and contain the assemblage sp–g–cd–mag. Modelling of these rocks in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O system suggests that they evolved along a heating and cooling P–T path with only limited decompression accompanying cooling on the retrograde path. Peak temperatures and pressures of ~880–920 °C and 6–6.5 kbar are inferred for the majority of the Anosyen domain, with slightly lower peak temperatures (~840 °C) estimated in the extreme northwest of the area. The high‐temperature and relatively low‐pressure nature of metamorphism suggests high geothermal gradients existed during orogenesis, which in southern Madagascar is related to the amalgamation of Gondwana (580–520 Ma). Although metamorphic temperatures may have been augmented via thermal advection from the emplacement of the syn‐ to post‐tectonic Ambalavao suite, the high geothermal gradients nevertheless suggest thin and consequently hot lithosphere existed prior to orogenesis.  相似文献   

15.
Eclogite facies metatroctolites from a variety of Western Alps localities (Voltri, Monviso, Lanzo, Allalin, Zermat–Saas, etc.) that preserve textural evidence of their original form as bimineralic olivine‐plagioclase rocks are considered in terms of calculated mineral equilibria in the system Na2O‐CaO‐FeO‐MgO‐Al2O3‐SiO2‐H2O (NCFMASH). Pseudosections, based on a new petrogenetic grid for NCFMASH presented here, are used to unravel the metamorphic history of the metatroctolites, considering the rocks to consist of different composition microdomains corresponding to the original olivine and plagioclase grains. On the basis that the preservation of the mineral assemblage in each microdomain will tend to be from where on a rock's P–T path the metamorphic fluid phase is used up via rehydration reactions, P–T pseudosections contoured for water content, and P–T path‐MH2O (amount of water) pseudosections, are used to examine fluid behaviour in each microdomain. We show that the different microdomains are likely to preserve their mineral assemblages from different places on the P–T path. For the olivine microdomain, the diagnostic mineral assemblage is chloritoid + talc (+ garnet + omphacite). The preservation of this assemblage, in the light of the closed system P–T path‐MH2O relationships, implies that the microdomain loses its metamorphic fluid as it starts to decompress, and, in the absence of subsequent hydration, the high pressure mineral assemblage is then preserved. In the plagioclase microdomain, the diagnostic assemblage is epidote (or zoisite) + kyanite + quartz suggesting a lower pressure (of about 2 GPa) than for the olivine microdomain. In the light of P–T path‐MH2O relationships, development of this assemblage implies breakdown of lawsonite across the lawsonite breakdown reaction, regardless of the maximum pressure reached. It is likely that the plagioclase microdomain was mainly fluid‐absent prior to lawsonite breakdown, only becoming fluid‐present across the reaction, then immediately becoming fluid‐absent again.  相似文献   

16.
A thermodynamic model for haplogranitic melts in the system Na2O–CaO–K2O–Al2O3–SiO2–H2O (NCKASH) is extended by the addition of FeO and MgO, with the data for the additional end‐members of the liquid incorporated in the Holland & Powell (1998) internally consistent thermodynamic dataset. The resulting dataset, with the software thermocalc , is then used to calculate melting relationships for metapelitic rock compositions. The main forms for this are PT and TX pseudosections calculated for particular rock compositions and composition ranges. The relationships in these full‐system pseudosections are controlled by the low‐variance equilibria in subsystems of NCKFMASH. In particular, the solidus relationships are controlled by the solidus relationships in NKASH, and the ferromagnesian mineral relationships are controlled by those in KFMASH. However, calculations in NCKFMASH allow the relationships between the common metapelitic minerals and silicate melt to be determined. In particular, the production of silicate melt and melt loss from such rocks allow observations to be made about the processes involved in producing granulite facies rocks, particularly relating to open‐system behaviour of rocks under high‐grade conditions.  相似文献   

17.
Low-pressure granulite facies metasedimentary gneisses exposed in MacRobertson Land, east Antarctica, include hercynitic spinel-bearing metapelitic gneisses. Peak metamorphic mineral assemblages include spinel + rutile + ilmenite + sillimanite + garnet, spinel + ilmenite + sillimanite + garnet + cordierite, ortho-pyroxene + magnetite + ilmenite + garnet, spinel + cordierite + biotite + ilmenite and orthopyroxene + cordierite + biotite, each with quartz, K-feldspar and melt. The presence of garnet + biotite- and cordierite + orthopyroxene-bearing assemblages implies crossing tie-lines in AFM projection for the K2O-FeO-MgO-Al2O3-SiO2-H2O (KFMASH) system. This apparent contradiction, and the presence of spinel, rutile and ilmenite in the assemblages, is acounted for by using the KFMASH-TiO2-O2 system, i.e. AFM + TiO2+ Fe2O3. We derive a petrogenetic grid for this system, applicable to low-pressure granulite facies metamorphic conditions. Retrograde assemblages are interpreted from corona textures on hercynitic spinel and Fe-Ti oxides. The relative positions of the peak and retrograde metamorphic assemblages on the petrogenetic grid suggest that corona development occurred during essentially isobaric cooling.  相似文献   

18.
The presence in rocks of coexisting sapphirine + quartz has been widely used to diagnose conditions of ultra‐high‐temperature (UHT) metamorphism (>900 °C), an inference based on the restriction of this assemblage to temperatures >980 °C in the conventionally considered FeO–MgO–Al2O3–SiO2 (FMAS) chemical system. With a new thermodynamic model for sapphirine that includes Fe2O3, phase equilibra modelling using thermocalc software has been undertaken in the FeO–MgO–Al2O3–SiO2–O (FMASO) and FeO–MgO–Al2O3–SiO2– TiO2–O (FMASTO) chemical systems. Using a variety of calculated phase diagrams for quartz‐saturated systems, the effects of Fe2O3 and TiO2 on FMAS phase relations are shown to be considerable. Importantly, the stability field of sapphirine + quartz assemblages extends down temperature to 850 °C in oxidized systems and thus out of the UHT range.  相似文献   

19.
Sapphirine and spinel can accommodate significant ferric iron and therefore the mineral equilibria involving these phases must be sensitive to a(O2). In this paper we examine the theoretical phase relationships involving sapphirine and spinel in addition to sillimanite, garnet, cordierite, rutile, hematite-ilmenite solid solution (henceforth ilmenite), and magnetite-ulvospinel solid solution (henceforth magnetite), in the presence of quartz and hypersthene in the system FeO-MgO-Al2O3-SiO2-TiO2-O2 (FMASTO), with particular reference to the topological inversion in P-T postulated by Hensen (Hensen 1986). Documented natural associations suggest that the appropriate topology for assemblages involving magnetite and ilmenite is Hensen's higher a(O2) one, while, in contrast, the topology for assemblages involving ilmenite and rutile is the lower a(O2) one. The exact configuration of the inversion between these two topologies remains uncertain because of uncertainties in the ferric/ferrous iron partitioning between sapphirine and spinel-cordierite at high temperatures. By comparison with experimental data and natural occurences, the sillimanite-sapphirine-cordierite-garnet-hypersthene-quartz assemblage is in equilibrium at about 1000°–1020° C and 7–8 kbars, while sapphirine-cordierite-spinel-garnet-hypersthene-quartz occurs at temperatures in excess of those attainable during crustal metamorphism, for ilmenite-rutile buffered assemblages. This implies that sapphirine-rutil-ehypersthene-quartz assemblages, as found in the Napier Complex, Antarctica, can only occur at > 1000° C. Also, spinel-rutile-hypersthene-quartz assemblages should not be found in rocks because temperatures in excess of 1100° C are expected to be involved in their formation. The temperatures of formation of spinel-sillimanite-sapphirine-garnethypersthene-quartz, sapphirine-spinel-cordierite-sillimanite-hypersthene-quartz, and sillimanite-spinel-cordieritegarnet-hypersthene-quartz in assemblages buffered by magnetite and ilmenite are less well constrained, but are likely to be in the range 900°–1000° C. These conclusions apply to rocks with compositions close to FMASTO; the perturbing effects of substantial concentrations of additional components, in particular Ca, mainly in garnet, and Zn and Cr, mainly in spinel, may invalidate these conclusions.  相似文献   

20.
Abstract Sapphirine-bearing rocks occur in three conformable, metre-size lenses in intrusive quartzo-feldspathic orthogneisses in the Curaçà valley of the Archaean Caraiba complex of Brazil. In the lenses there are six different sapphirine-bearing rock types, which have the following phases (each containing phlogopite in addition): A: Sapphirine, orthopyroxene; B: Sapphirine, cordierite, orthopyroxene, spinel; C: Sapphirine, cordierite; D: Sapphirine, cordierite, orthopyroxene, quartz; E: Sapphirine, cordierite, orthopyroxene, sillimanite, quartz; F: Sapphirine, cordierite, K-feldspar, quartz. Neither sapphirine and quartz nor orthopyroxene and sillimanite have been found in contact, however. During mylonitization, introduction of silica into the three quartz-free rocks (which represent relict protolith material) gave rise to the three cordierite and quartz-bearing rocks. Stable parageneses in the more magnesian rocks were sapphirine–orthopyroxene and sapphirine–cordierite. In more iron-rich rocks, sapphirine–cordierite, sapphirine-cordierite–sillimanite, cordierite–sillimanite, sapphirine–cordierite–spinel–magnetite and quartz–cordierite–orthopyroxene were stable. The iron oxide content in sapphirine of the six rocks increases from an average of 2.0 to 10.5 wt % (total Fe as FeO) in the order: C,F–A,D–B,E. With increase in Fe there is an increase in recalculated Fe2O3 in sapphirine. The four rock types associated with the sapphirine-bearing lenses are: I: Orthopyroxene, cordierite, biotite, quartz, feldspar tonalitic to grandioritic gneiss; II: Biotite, quartz, feldspar gneiss; III: Orthopyroxene, clinopyroxene, hornblende, plagioclase meta-norite; IV: Biotite, orthopyroxene, quartz, feldspar, garnet, cordierite, sillimanite granulite gneiss. The stable parageneses in type IV are orthopyroxene–cordierite–quartz, garnet–sillimanite–quartz and garnet–cordierite–sillimanite. Geothermobarometry suggests that the associated host rocks equilibrated at 720–750°C and 5.5–6.5 kbar. Petrogenetic grids for the FMASH and FMAFSH (FeO–MgO–Al2O3–Fe2O3–SiO2–H2O) model systems indicate that sapphirine-bearing assemblages without garnet were stabilized by a high Fe3+ content and a high XMg= (Mg/ (Mg+Fe2+)) under these P–T conditions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号