首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 515 毫秒
1.
Shales of the Silurian Dadaş Formation exposed in the southeast Anatolia were investigated by organic geochemical methods. The TOC contents range from 0.24 to 1.48 wt% for the Hazro samples and 0.19 to 3.58 wt% for the Korudağ samples. Tmax values between 438 and 440 °C in the Hazro samples indicate thermal maturity; Tmax values ranging from 456 to 541 °C in the Korudağ samples indicate late to over-maturity. Based on the calculated vitrinite reflectance and measured vitrinite equivalent reflectance values, the Korudağ samples have a maximum of 1.91%R(g-v), in the gas generation window, while a maximum value of 0.79%R(amor-v) of one sample from the Hazro section is in the oil generation window. Illite crystallinity (IC) values of all samples are consistent with maturity results.Pr/Ph ratios ranging from 1.32 to 2.28 and C29/C30 hopane ratios > 1.0 indicate an anoxic to sub-oxic marine-carbonate depositional environment.The Hazro shales do not have any shale oil or shale gas potential because of their low oil saturation index values and early to moderate thermal maturation. At first glance, the Korudağ shales can be considered a shale gas formation because of their organic richness, thickness and thermal over-maturity. However, the low silica content and brittle index values of these shales are preventing their suitability as shale gas resource systems.  相似文献   

2.
Shales from the Lower Silurian Longmaxi Formation in the Sichuan Basin are among the most important shale gas reservoirs in China, and have been investigated because of their great shale gas potential. To understand the pore structure and fractal characteristics of the shales, a series of experiments was conducted on core samples from the Lower Silurian Longmaxi Formation in the Sichuan Basin of China, including X-ray diffraction (XRD), total organic carbon (TOC) content and vitrinite reflectance (Ro) analysis, field emission-environmental scanning electron microscope (FE-ESEM) observation, and low-pressure N2 adsorption-desorption experiments. Frenkel-Halsey-Hill (FHH) method was applied to calculate fractal dimensions. In addition, the pore genesis, the relationships between composition and thermal maturity, the pore structure parameters, and the fractal dimensions are discussed. FE-ESEM observation results show that the Longmaxi Formation shales are dominated by organic-matter (OM) pores along with interparticle (interP) pores, intraparticle (intraP) pores and fracture pores. This study identified the fractal dimensions at relative pressures of 0–0.45 and 0.45–1 as D1 and D2 respectively. D1 ranged from 2.60 to 2.71 and D2 ranged from 2.71 to 2.82. D1 was typically smaller than D2, indicating that the smaller pores in shales were more homogeneous than the larger ones. The formation of these OM pores is owing to kerogen deformation during the thermal maturation, which results in a large number of nanopores. The pore structure of the Longmaxi Formation shales is primarily controlled by TOC content and thermal maturity. TOC content is a controlling factor on the fractal dimensions as it exhibited positive correlations with D1 and D2. Fractal dimensions are useful for the characterization of the pore structures complexity of the Longmaxi Formation shales because D1 and D2 correlate well with pore structure parameters as they both increase with the increase of surface area and the decrease of average pore diameter.  相似文献   

3.
Ever since a breakthrough of marine shales in China, lacustrine shales have been attracting by the policy makers and scientists. Organic-rich shales of the Middle Jurassic strata are widely distributed in the Yuqia Coalfield of northern Qaidam Basin. In this paper, a total of 42 shale samples with a burial depth ranging from 475.5 m to 658.5 m were collected from the Shimengou Formation in the YQ-1 shale gas borehole of the study area, including 16 samples from the Lower Member and 26 samples from the Upper Member. Geochemistry, reservoir characteristics and hydrocarbon generation potential of the lacustrine shales in YQ-1 well were preliminarily investigated using the experiments of vitrinite reflectance measurement, maceral identification, mineralogical composition, carbon stable isotope, low-temperature nitrogen adsorption, methane isothermal adsorption and rock eval pyrolysis. The results show that the Shimengou shales have rich organic carbon (averaged 3.83%), which belong to a low thermal maturity stage with a mean vitrinite reflectance (Ro) of 0.49% and an average pyrolytic temperature of the generated maximum remaining hydrocarbon (Tmax) of 432.8 °C. Relative to marine shales, the lacustrine shales show low brittleness index (averaged 34.9) but high clay contents (averaged 55.1%), high total porosities (averaged 13.71%) and great Langmuir volumes (averaged 4.73 cm−3 g). Unlike the marine and marine-transitional shales, the quartz contents and brittleness index (BI) values of the lacustrine shales first decrease then increase with the rising TOC contents. The kerogens from the Upper Member shales are dominant by the oil-prone types, whereas the kerogens from the Lower Member shales by the gas-prone types. The sedimentary environment of the shales influences the TOC contents, thus has a close connection with the hydrocarbon potential, mineralogical composition, kerogen types and pore structure. Additionally, in terms of the hydrocarbon generation potential, the Upper Member shales are regarded as very good and excellent rocks whereas the Lower Member shales mainly as poor and fair rocks. In overall, the shales in the top of the Upper Member can be explored for shale oil due to the higher free hydrocarbon amount (S1), whereas the shales in the Lower Member and the Upper Member, with the depths greater than 1000 m, can be suggested to explore shale gas.  相似文献   

4.
Several exploration wells have intersected a Cenozoic coal-bearing, fluvial-deltaic mudstone and sandstone succession in the northeastern Vietnamese part of the Malay Basin, and have successfully tested seismically identified direct hydrocarbon indicators (DHIs). The oil and gas/condensate discovery well 46-CN-1x encountered a ∼55 m thick section of lacustrine mudstones having considerable potential as an oil source. Vitrinite reflectance (VR) measurements from these alginite-bearing rocks introduce several problems in thermal maturity evaluation, including associated VR suppression and delineation of cavings and bitumens. Reliable thermal maturity gradients, however, may be established using a combination of conventional VR measurements and ‘equivalent VR’ (EqVR) values derived from the fluorescence alteration of multiple macerals (FAMM) technique. These measurements, performed on dispersed organic matter (DOM) in cuttings from 46-CN-1x, allow separation of low-reflecting bitumens and vitrinite in cavings from indigenous vitrinite and the FAMM results indicate VR suppression of 0.14% in an alginite-bearing mudstone with a high Hydrogen Index value. On the basis of available ‘raw’ VR data, a highly irregular maturity trend is determined, with the deepest sample (2675–2680 m) having a VR of ∼0.4%Ro. The EqVR value, however, for the deepest sample is 0.70%. The maturity trend determined from the FAMM data (and VR data, omitting samples having suppressed VR) indicates that the top of the oil window (VR of 0.75%Ro) is located at about 2800 m depth. Modelling the geothermal gradient using the EASY%Ro algorithm yields ∼40 °C/km for both of the two maturity profiles; this is in the low end of the range for the Malay Basin. Modelled temperature histories indicate onset of hydrocarbon generation for the uppermost Oligocene source rocks between 2 Ma and present-day, which post-dates trap formation. Seismic facies patterns suggest that lacustrine oil-prone units are in the oil window in the same graben complex a few km NW of the investigated well, and these rocks are likely to be the source of the hydrocarbons found in the well. A more widespread occurrence of hydrocarbons sourced from this kitchen is indicated by other discoveries and mapping of DHIs in the area.  相似文献   

5.
The Upper Cretaceous Mukalla coals and other organic-rich sediments which are widely exposed in the Jiza-Qamar Basin and believed to be a major source rocks, were analysed using organic geochemistry and petrology. The total organic carbon (TOC) contents of the Mukalla source rocks range from 0.72 to 79.90% with an average TOC value of 21.50%. The coals and coaly shale sediments are relatively higher in organic richness, consistent with source rocks generative potential. The samples analysed have vitrinite reflectance in the range of 0.84–1.10 %Ro and pyrolysis Tmax in the range of 432–454 °C indicate that the Mukalla source rocks contain mature to late mature organic matter. Good oil-generating potential is anticipated from the coals and coaly shale sediments with high hydrogen indices (250–449 mg HC/g TOC). This is supported by their significant amounts of oil-liptinite macerals are present in these coals and coaly shale sediments and Py-GC (S2) pyrograms with n-alkane/alkene doublets extending beyond nC30. The shales are dominated by Type III kerogen (HI < 200 mg HC/g TOC), and are thus considered to be gas-prone.One-dimensional basin modelling was performed to analysis the hydrocarbon generation and expulsion history of the Mukalla source rocks in the Jiza-Qamar Basin based on the reconstruction of the burial/thermal maturity histories in order to improve our understanding of the of hydrocarbon generation potential of the Mukalla source rocks. Calibration of the model with measured vitrinite reflectance (Ro) and borehole temperature data indicates that the present-day heat flow in the Jiza-Qamar Basin varies from 45.0 mW/m2 to 70.0 mW/m2 and the paleo-heat flow increased from 80 Ma to 25 Ma, reached a peak heat-flow values of approximately 70.0 mW/m2 at 25 Ma and then decreased exponentially from 25 Ma to present-day. The peak paleo-heat flow is explained by the Gulf of Aden and Red Sea Tertiary rifting during Oligocene-Middle Miocene, which has a considerable influence on the thermal maturity of the Mukalla source rocks. The source rocks of the Mukalla Formation are presently in a stage of oil and condensate generation with maturity from 0.50% to 1.10% Ro. Oil generation (0.5% Ro) in the Mukalla source rocks began from about 61 Ma to 54 Ma and the peak hydrocarbon generation (1.0% Ro) occurred approximately from 25 Ma to 20 Ma. The modelled hydrocarbon expulsion evolution suggested that the timing of hydrocarbon expulsion from the Mukalla source rocks began from 15 Ma to present-day.  相似文献   

6.
Mixed layer clay minerals, vitrinite reflectance and geochemical data from Rock-Eval pyrolysis were used to constrain the burial evolution of the Mesozoic–Cenozoic successions exposed at the Kuh-e-Asmari (Dezful Embayment) and Sim anticlines (Fars province) in the Zagros fold-and-thrust belt. In both areas, Late Cretaceous to Pliocene rocks, show low levels of thermal maturity in the immature stages of hydrocarbon generation and early diagenetic conditions (R0 I–S and Ro% values < 0.5). At depths of 2–4 km, Tmax values (435–450 °C) from organic-rich layers of the Sargelu, Garau and Kazhdumi source rocks in the Kuh-e-Asmari anticline indicate mid to late mature stages of hydrocarbon generation. One dimensional thermal models allowed us to define the onset of oil generation for the Middle Jurassic to Eocene source rocks and pointed out that sedimentary burial is the main factor responsible for measured levels of thermal maturity. Specifically, the Sargelu and Garau Formations entered the oil window prior to Zagros folding in Late Cretaceous times, the Kazhdumi Formation during middle Miocene (syn-folding stage), and the Pabdeh Formation in the Late Miocene–Pliocene after the Zagros folding. In the end, the present-day distribution of oil fields in the Dezful Embayment and gas fields in the Fars region is primarily controlled by lithofacies changes and organic matter preservation at the time of source rock sedimentation. Burial conditions during Zagros folding had minor to negligible influence.  相似文献   

7.
This study investigates the source rock characteristics of Permian shales from the Jharia sub-basin of Damodar Valley in Eastern India. Borehole shales from the Raniganj, Barren Measure and Barakar Formations were subjected to bulk and quantitative pyrolysis, carbon isotope measurements, mineral identification and organic petrography. The results obtained were used to predict the abundance, source and maturity of kerogen, along with kinetic parameters for its thermal breakdown into simpler hydrocarbons.The shales are characterized by a high TOC (>3.4%), mature to post-mature, heterogeneous Type II–III kerogen. Raniganj and Barren Measure shales are in mature, late oil generation stage (Rr%Raniganj = 0.99–1.22; Rr%Barren Measure = 1.1–1.41). Vitrinite is the dominant maceral in these shales. Barakar shows a post-mature kerogen in gas generation stage (Rr%Barakar = 1.11–2.0) and consist mainly of inertinite and vitrinite. The δ13Corg value of kerogen concentrate from Barren Measure shale indicates a lacustrine/marine origin (−24.6–−30.84‰ vs. VPDB) and that of Raniganj and Barakar (−22.72–−25.03‰ vs. VPDB) show the organic provenance to be continental. The δ13C ratio of thermo-labile hydrocarbons (C1–C3) in Barren Measure suggests a thermogenic source.Discrete bulk kinetic parameters indicate that Raniganj has lower activation energies (ΔE = 42–62 kcal/mol) compared to Barren Measure and Barakar (ΔE = 44–68 kcal/mol). Temperature for onset (10%), middle (50%) and end (90%) of kerogen transformation is least for Raniganj, followed by Barren Measure and Barakar. Mineral content is dominated by quartz (42–63%), siderite (9–15%) and clay (14–29%). Permian shales, in particular the Barren Measure, as inferred from the results of our study, demonstrate excellent properties of a potential shale gas system.  相似文献   

8.
The Songliao Basin is a large-scale petroliferous basin in China. With a gradual decline in conventional oil production, the exploration and development of replacement resources in the basin is becoming increasingly important. Previous studies have shown that the Cretaceous Qingshankou Formation (K2qn) has favorable geological conditions for the formation of shale oil. Thus, shale oil in the Qingshankou Formation represents a promising and practical replacement resource for conventional oil. In this study, geological field surveys, core observation, sample tests, and the analysis of well logs were applied to study the geochemical and reservoir characteristics of shales, identify shale oil beds, build shale oil enrichment models, and classify favorable exploration areas of shale oil from the Cretaceous Qingshankou Formation. The organic matter content is high in shales from the first member of the Cretaceous Qingshankou Formation (K2qn1), with average total organic carbon (TOC) content exceeding 2%. The organic matter is mainly derived from lower aquatic organisms in a reducing brackish to fresh water environment, resulting in mostly type I kerogen. The vitrinite reflectance (Ro) and the temperature at which the maximum is release of hydrocarbons from cracking of kerogen occurred during pyrolysis (Tmax) respectively range from 0.5% to 1.1% and from 430 °C to 450 °C, indicating that the K2qn1 shales are in the low-mature to mature stage (Ro ranges from 0.5% to 1.2%) and currently generating a large amount of oil. The favorable depth for oil generation and expulsion is 1800–2200 m and 1900–2500 m, respectively as determined by basin modeling. The reserving space of the K2qn1 shale oil includes micropores and mircofractures. The micropore reservoirs are developed in shales interbedded with siltstones exhibiting high gamma ray (GR), high resistivity (Rt), low density (DEN), and slightly abnormal spontaneous potential (SP) in the well-logging curves. The microfracture reservoirs are mainly thick shales with high Rt, high AC (acoustic transit time), high GR, low DEN, and abnormal SP. Based on the shale distribution, geochemical characteristics, reservoir types, fracture development, and the process of shale oil generation and enrichment, the southern Taikang and northern Da'an are classified as two favorable shale oil exploration areas in the Songliao Basin.  相似文献   

9.
Fluid inclusion gases in minerals from shale hosted fracture-fill mineralization have been analyzed for stable carbon isotopic ratios of CH4 using a crushing device interfaced to an isotope ratio mass spectrometer (IRMS). The samples of Paleozoic strata under study originate from outcrops and wells in the Rhenish Massif and Campine Basin, Harz Mountains, and the upper slope of the Southern Permian Basin. Fracture-fill mineralization hosted by Mesozoic strata was sampled from drill cores in the Lower Saxony Basin. Some studied sites are candidates for shale gas exploration in Germany. Samples of Mesozoic strata are characterized by abundant calcite-filled horizontal fractures which preferentially occur in TOC-rich sections of the drilled sediments. Only rarely are vertical fractures filled with carbonates and/or quartz in drill cores from Mesozoic strata but in Paleozoic shale they occur frequently. The δ13C(CH4) values of fluid inclusions in calcite from horizontal fractures hosted by Mesozoic strata suggest that gaseous hydrocarbons were generated during the oil/early gas window and that the formation of horizontal fractures seems to be related to hydraulic expulsion fracturing. The calculated maturity of the source rocks at the time of gas generation lies below the maturity derived from measured vitrinite reflectance. Thus, the formation of horizontal fractures and trapping of gas that was generated in the oil and/or early gas window obviously occurred prior to maximal burial. Rapidly increasing vitrinite reflectance data seen locally can be explained by hydrothermal alteration, as indicated by increasing δ13C (CH4–CO2) values in fluid inclusions. The formation of vertical fractures in studied Mesozoic sediments is related to stages of post-burial inversion; gas-rich inclusions in fracture filling minerals recorded the migration of gas that had probably been generated instantaneously, rather than cumulatively, from high to overmature source rocks. Since no evidence is given for the presence of early generated gas in studied Paleozoic shale, it appears likely that major gas loss from shales occurred due to deformation and uplift of these sediments in response to the Variscan Orogeny.  相似文献   

10.
Geochemical as well as multivariate statistical analyses (PCA) were carried out on 20 crude oil samples from ‘Middle’ Pliocene Production Series (MPPS) of Guneshli-Chirag-Azeri (GCA), Bahar, and Gum Adasi fields in the western South Caspian Basin (SCB). PCA analysis employed to source-specific biomarkers distinguishes the oils into two types one being divided into two sub-types; Type 1 (GCA oils), Type 2A (Bahar field oils) and Type 2B (Gum Adasi field oils). Indirect oil-to-source rock correlations to available source rock data from previous studies suggest that Type 1 oils, located in the Apsheron-Balkhans uplift area, are derived from basinal shales of the Oligocene-Lower Miocene Middle Maikop Formation. Type 2A and 2B oils, located in the Gum-deniz-Bahar-Shakh-deniz trend area, are more likely derived from shelf-edge shales of the Upper Maikop Formation and the Middle-Upper Miocene Diatom Suite, respectively.Biomarker maturity study reveals that Type 1 oils (mean %Rc=0.78) are more mature than Type 2 oils (mean %Rc=0.71). Source rocks, which generated these oils, were at generation depth interval between 5200 m (112 °C) and 7500 m (153 °C) at the time of expulsion. This indicates that the western SCB oils experienced significant long-range vertical migration along the deep-seated faults to accumulate in the MPPS reservoirs. Post-accumulation biodegradation process was only observed in the Guneshli field where bacterial alteration (level 4) began between 4.2 and 2.6 mybp and stopped with the deposition of the overlying impermeable Upper Pliocene Akchagyl Formation. Subsequent light hydrocarbon (C1–C16) charge into the Guneshli fields caused precipitation of asphaltenes, which is evidenced by high resin to asphaltene ratios for the present-day Guneshli oils. Evaporative-fractionation examined using the scheme of [Thompson, 1987] showed high correlations of the ‘aromaticity’ B parameter (=toluene/n-C7) and ‘parafinicity’ F parameter (=n-C7/MCH with the %Rc (maturity) and C27/C29 sterane ratio (organic matter type). This implies that Thompson's approach should be used with caution in the SCB. Among the several mechanisms, rapid and thick deposition of Pliocene sediments and subsequent high heating rate on the Maikop Formation and Diatom Suite is probably the most plausible way of explaining the origin of light hydrocarbons in the Guneshli and Bahar fields.  相似文献   

11.
Thermal maturity has a significant impact on hydrocarbon generation and the storage capacity within shales, but explicit and quantitative characterization of that impact on continental shales is scarce. To better understand how thermal maturation affects the organic and inorganic changes of the continental shale reservoirs, hydrous pyrolysis was performed to simulate the maturation process. TOC, Rock-Eval and adsorption isotherms tests were used to obtain various geochemical parameters of the shale solid residues. The results indicate that with pyrolysis temperature increasing from ambient temperature to 550 °C, the vitrinite reflectance increases from 0.5% to 2.5% Ro and the TOC (total organic carbon) loss weight reaches 25%. Regarding porosity, the fraction of micro-to meso-pores in the shale increases with an increase in the pyrolysis temperature, whereas the macro-pores do not change significantly. The total amount of gas adsorption does not necessarily increase as the TOC is consumed, but the gas adsorption capacity per unit of TOC increases with increasing thermal maturity. Our finding provides theoretical modelling for identifying shale gas development prospective zones according to thermal maturity mapping and for predicting quantitatively the geochemical and inorganic changes that occur with thermal evolution.  相似文献   

12.
The Akyaka section in the central Taurus region in the southern part of Turkey includes the organic matter and graptolite-rich black shales which were deposited under dysoxic to anoxic marine conditions in the Early Silurian. A biostratigraphical analysis, based on graptolite assemblages, indicates that the sediments studied may well be referable to the querichi Biozone and early Telychian, Llandovery. A total of 15 samples have been subjected to Leco and Rock-Eval pyrolysis and graptolite reflectance measurements for determination of their source rock characteristics and thermal maturity. The total organic carbon content of the graptolite-bearing shales varies from 1.75 to 3.52 wt% with an average value of 2.86 wt%. The present Rock-Eval pyrolytic yields and calculated values of hydrogen and oxygen indexes imply that the recent organic matter type is inert kerogen. The measured maximum graptolite reflectance (GRmax %) values are between 5.04% and 6.75% corresponding to thermally over maturity. This high maturity suggests a deep burial of the Lower Silurian sediments resulting from overburden rocks of Upper Paleozoic to Mesozoic Upper Cretaceous and Middle-Upper Eocene thrusts occurred in the region.  相似文献   

13.
In order to investigate the hydrocarbon generation process and gas potentials of source rocks in deepwater area of the Qiongdongnan Basin, kinetic parameters of gas generation(activation energy distribution and frequency factor) of the Yacheng Formation source rocks(coal and neritic mudstones) was determined by thermal simulation experiments in the closed system and the specific KINETICS Software. The results show that the activation energy(Ea) distribution of C1–C5 generation ranges from 50 to 74 kcal/mol with a frequency factor of 2.4×1015 s–1 for the neritic mudstone and the Ea distribution of C1–C5 generation ranges from 49 to 73 kcal/mol with a frequency factor of 8.92×1013 s–1 for the coal. On the basis of these kinetic parameters and combined with the data of sedimentary burial and paleothermal histories, the gas generation model of the Yacheng Formation source rocks closer to geological condition was worked out, indicating its main gas generation stage at Ro(vitrinite reflectance) of 1.25%–2.8%. Meanwhile, the gas generation process of the source rocks of different structural locations(central part, southern slope and south low uplift) in the Lingshui Sag was simulated. Among them, the gas generation of the Yacheng Formation source rocks in the central part and the southern slope of the sag entered the main gas window at 10 and 5 Ma respectively and the peak gas generation in the southern slope occurred at 3 Ma. The very late peak gas generation and the relatively large gas potential indices(GPI:20×108–60×108 m3/km2) would provide favorable conditions for the accumulation of large natural gas reserves in the deepwater area.  相似文献   

14.
A reconnaissance study of potential hydrocarbon source rocks of Paleozoic to Cenozoic age from the highly remote New Siberian Islands Archipelago (Russian Arctic) was carried out. 101 samples were collected from outcrops representing the principal Paleozoic-Cenozoic units across the entire archipelago. Organic petrological and geochemical analyses (vitrinite reflectance measurements, Rock-Eval pyrolysis, GC-MS) were undertaken in order to screen the maturity, quality and quantity of the organic matter in the outcrop samples. The lithology varies from continental sedimentary rocks with coal particles to shallow marine carbonates and deep marine black shales. Several organic-rich intervals were identified in the Upper Paleozoic to Lower Cenozoic succession. Lower Devonian shales were found to have the highest source rock potential of all Paleozoic units. Middle Carboniferous-Permian and Triassic units appear to have a good potential for natural gas formation. Late Mesozoic (Cretaceous) and Cenozoic low-rank coals, lignites, and coal-bearing sandstones also display a potential for gas generation. Kerogen type III (humic, gas-prone) dominates in most of the samples, and indicates deposition in lacustrine to coastal paleoenvironments. Most of the samples (except some of Cretaceous and Paleogene age) reached oil window maturities, whereas the Devonian to Carboniferous units shared a maturity mainly within the gas window.  相似文献   

15.
Deposition of organic rich black shales and dark gray limestones in the Berriasian-Turonian interval has been documented in many parts of the world. The Early Cretaceous Garau Formation is well exposed in Lurestan zone in Iran and is composed of organic-rich shales and argillaceous limestones. The present study focuses on organic matter characterization and source rock potential of the Garau Formations in central part of Lurestan zone. A total of 81 core samples from 12 exploratory wells were subjected to detailed geochemical analyses. These samples have been investigated to determine the type and origin of the organic matter as well as their petroleum-generation potential by using Rock-Eval/TOC pyrolysis, GC and GCMS techniques. The results showed that TOC content ranges from 0.5 to 4.95 percent, PI and Tmax values are in the range of 0.2 and 0.6, and 437 and 502 °C. Most organic matter is marine in origin with sub ordinary amounts of terrestrial input suggesting kerogen types II-III and III. Measured vitrinite reflectance (Rrandom%) values varying between 0.78 and 1.21% indicating that the Garau sediments are thermally mature and represent peak to late stage of hydrocarbon generation window. Hydrocarbon potentiality of this formation is assessed fair to very good capable of generating chiefly gas and some oil. Biomarker characteristics are used to provide information about source and maturity of organic matter input and depositional environment. The relevant data include normal alkane and acyclic isoprenoids, distribution of the terpane and sterane aliphatic biomarkers. The Garau Formation is characterized by low Pr/Ph ratio (<1.0), high concentrations of C27 regular steranes and the presence of tricyclic terpanes. These data indicated a carbonate/shale source rock containing a mixture of aquatic (algal and bacterial) organic matter with a minor terrigenous organic matter contribution that was deposited in a marine environment under reducing conditions. The results obtained from biomarker characteristics also suggest that the Garau Formation is thermally mature which is in agreement with the results of Rock-Eval pyrolysis.  相似文献   

16.
In recent years, new oil reservoirs have been discovered in the Eocene tight sandstone of the Huilu area, northern part of the Pearl River Mouth basin, South China Sea, indicating good prospects for tight oil exploration in the area. Exploration has shown that the Huilu area contains two main sets of source rocks: the Eocene Wenchang (E2w) and Enping (E2e) formations. To satisfy the requirements for further exploration in the Huilu area, particularly for tight oil in Eocene sand reservoirs, it is necessary to re-examine and analyze the hydrocarbon generation and expulsion characteristics. Based on mass balance, this study investigated the hydrocarbon generation and expulsion characteristics as well as the tight oil resource potential using geological and geochemical data and a modified conceptual model for generation and expulsion. The results show that the threshold and peak expulsion of the E2w source rocks are at 0.6% vitrinite reflectance and 0.9% vitrinite reflectance, respectively. There were five hydrocarbon expulsion centers, located in the western, eastern, and northern Huizhou Sag and the southern and northern Lufeng Sag. The hydrocarbon yields attributed to E2w source rocks are 2.4 × 1011 tons and 1.6 × 1011 tons, respectively, with an expulsion efficiency of 65%. The E2e source rock threshold and peak expulsion are at 0.65% vitrinite reflectance and 0.93% vitrinite reflectance, respectively, with hydrocarbon expulsion centers located in the centers of the Huizhou and Lufeng sags. The yields attributed to E2e source rocks are 1.1 × 1011 tons and 0.2 × 1011 tons, respectively, with an expulsion efficiency of 20%. Using an accumulation coefficient of 7%–13%, the Eocene tight reservoirs could contain approximately 1.3 × 1010 tons to 2.3 × 1010 tons, with an average of 1.8 × 1010 tons, of in-place tight oil resources (highest recoverable coefficient can reach 17–18%), indicating that there is significant tight oil potential in the Eocene strata of the Huilu area.  相似文献   

17.
Late Turonian, Coniacian and Santonian source rock samples from a recently drilled well (Tafaya Sondage No. 2; 2010) in the Tarfaya Basin were analyzed for quantity, quality, maturity and depositional environment of the organic matter (OM). To our knowledge such a thick sequence of organic matter-rich Turonian to Santonian source rocks was investigated in that great detail for the first time. Organic geochemical and organic petrological investigations were carried out on a large sample set from the 200 m thick sequence. In total 195 core samples were analyzed for total organic carbon (Corg), total inorganic carbon contents and total sulfur (TS) contents. Rock-Eval pyrolysis and vitrinite reflectance measurements were performed on 28 samples chosen on the basis of their Corg content. Non-aromatic hydrocarbons were analyzed on selected samples by way of gas chromatography–flame ionization detection (GC–FID) and GC–mass spectrometry (GC–MS). The organic matter-rich carbonates revealed a high source rock potential, representing type I kerogen and a good preservation of the organic matter, which is mainly of marine (phytoplankton) origin. HI values are high (400–900 mg/g Corg) and in a similar range as those described for more recent upwelling sediments along the continental slope of North Africa. TS/Corg ratios as well as pristane over phytane ratios indicate variable oxygen content during sediment deposition. All samples are clearly immature with respect to petroleum generation which is supported by maturity parameters such as vitrinite reflectance (0.3–0.4%), Tmax values (401–423 °C), production indices (S1/(S1 + S2) > 0.1) as well as maturity parameters based on ratios of specific steranes and hopanes.  相似文献   

18.
Nine organic-rich shale samples of Lower Cambrian black shales were collected from a recently drilled well in the Qiannan Depression, Guizhou Province where they are widely distributed with shallower burial depth than in Sichuan Basin, and their geochemistry and pore characterization were investigated. The results show that the Lower Cambrian shales in Qiannan Depression are organic rich with TOC content ranging from 2.81% to 12.9%, thermally overmature with equivalent vitrinite reflectance values in the range of 2.92–3.25%, and clay contents are high and range from 32.4% to 53.2%. The samples have a total helium porosity ranging from 2.46% to 4.13% and total surface area in the range of 9.08–37.19 m2/g. The estimated porosity in organic matters (defined as the ratio of organic pores to the volume of total organic matters) based on the plot of TOC vs helium porosity is about 10% for the Lower Cambrian shales in Qiannan Depression and is far lower than that of the Lower Silurian shales (36%) in and around Sichan Basin. This indicates that either the organic pores in the Lower Cambrian shale samples have been more severely compacted than or they did not develop organic pores as abundantly as the Lower Silurian shales. Our studies also reveal that the micropore volumes determined by Dubinin–Radushkevich (DR) equation is usually overestimated and this overestimation is closely related to the non-micropore surface area of shales (i.e. the surface area of meso- and macro-pores). However, the modified BET equation can remove this overestimation and be conveniently used to evaluate the micropore volumes/surface area and the non-micropore surface areas of micropore-rich shales.  相似文献   

19.
Organic shales deposited in a continental environment are well developed in the Ordos Basin, NW China, which is rich in hydrocarbons. However, previous research concerning shales has predominantly focused on marine shales and barely on continental shales. In this study, geochemical and mineralogical analyses, high-pressure mercury intrusion and low-pressure adsorption were performed on 18 continental shale samples obtained from a currently active shale gas play, the Chang 7 member of Yanchang Formation in the Ordos Basin. A comparison of all these techniques is provided for characterizing the complex pore structure of continental shales.Geochemical analysis reveals total organic carbon (TOC) values ranging from 0.47% to 11.44%, indicating that there is abundant organic matter (OM) in the study area. Kerogen analysis shows vitrinite reflectance (Ro) of 0.68%–1.02%, indicating that kerogen is at a mature oil generation stage. X-ray diffraction mineralogy (XRD) analysis indicates that the dominant mineral constituents of shale samples are clay minerals (which mainly consist of illite, chlorite, kaolinite, and negligible amounts of montmorillonite), quartz and feldspar, followed by low carbonate content. All-scale pore size analysis indicates that the pore size distribution (PSD) of shale pores is mainly from 0.3 to 60 nm. Note that accuracy of all-scale PSD analysis decreases for pores less than 0.3 nm and more than 10 μm. Experimental analysis indicates that mesopores (2–50 nm) are dominant in continental shales, followed by micropores (<2 nm) and macropores (50 nm–10 μm). Mesopores have the largest contribution to pore volume (PV) and specific surface area (SSA). In addition, plate- and sheet-shaped pores are dominant with poor connectivity, followed by hybrid pores. Results of research on factors controlling pore structure development show that it is principally controlled by clay mineral contents and Ro, and this is different from marine systems. This study has important significance in gaining a comprehensive understanding of continental shale pore structure and the shale gas storage–seepage mechanism.  相似文献   

20.
An evaluation of the petroleum generating potential of onshore Eocene-Miocene sequences of Western Sabah, Malaysia was performed based on organic petrological and geochemical methods. The sequences analysed are the Belait, Meligan, Temburong and West Crocker formations of western Sabah. The Belait Formation which is Stage IV equivalent in the offshore represents one of the major source rock/reservoirs of the petroleum-bearing Sabah Basin. The Eocene-Early Miocene West Crocker and Temburong formations are deepwater turbidites whilst the Miocene Meligan and Belait formations are shallow marine fluvio-deltaic deposits. The vitrinite reflectance and pyrolysis Tmax values show that the Belait samples are generally immature for hydrocarbon generation, whereas the Meligan, Temburong and West Crocker samples are in the mature to late maturity stage of hydrocarbon generation. The overall bulk source rock properties of the Belait and Meligan show fair to good petroleum source rock potential with TOC more than 1 wt %, hydrocarbon yield in the range of 400–1300 ppm and moderately high HI for many of the samples. Most of the samples representing the Temburong and West Crocker formations have TOC less than 1 wt% and have no to fair hydrocarbon generating potential. Interestingly, the samples collected in the West Crocker Formation characterized by slump deposits (MTD) have TOC>2 and possess good to excellent hydrocarbon generating potential. The organic matter present in all of the studied formations is mainly of terrigenous origin based on the abundance of woody plant materials observed under the microscope. Consequently, the analysed sequences are predominantly gas prone, dominated by Type III and Type III-IV kerogen except for minor occurrence of mixed oil-gas prone Type II-III kerogen in the Belait Formation and in the slump mass transport deposits (MTD) of the West Crocker Formation.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号