首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Fluid inclusions in quartz veins of the High-Ardenne slate belt have preserved remnants of prograde and retrograde metamorphic fluids. These fluids were examined by petrography, microthermometry and Raman analysis to define the chemical and spatial evolution of the fluids that circulated through the metamorphic area of the High-Ardenne slate belt. The earliest fluid type was a mixed aqueous/gaseous fluid (H2O–NaCl–CO2–(CH4–N2)) occurring in growth zones and as isolated fluid inclusions in both the epizonal and anchizonal part of the metamorphic area. In the central part of the metamorphic area (epizone), in addition to this mixed aqueous/gaseous fluid, primary and isolated fluid inclusions are also filled with a purely gaseous fluid (CO2–N2–CH4). During the Variscan orogeny, the chemical composition of gaseous fluids circulating through the Lower Devonian rocks in the epizonal part of the slate belt, evolved from an earlier CO2–CH4–N2 composition to a later composition enriched in N2. Finally, a late, Variscan aqueous fluid system with a H2O–NaCl composition migrated through the Lower Devonian rocks. This latest type of fluid can be observed in and outside the epizonal metamorphic part of the High-Ardenne slate belt. The chemical composition of the fluids throughout the metamorphic area, shows a direct correlation with the metamorphic grade of the host rock. In general, the proportion of non-polar species (i.e. CO2, CH4, N2) with respect to water and the proportion of non-polar species other than CO2 increase with increasing metamorphic grade within the slate belt. In addition to this spatial evolution of the fluids, the temporal evolution of the gaseous fluids is indicative for a gradual maturation due to metamorphism in the central part of the basin. In addition to the maturity of the metamorphic fluids, the salinity of the aqueous fluids also shows a link with the metamorphic grade of the host-rock. For the earliest and latest fluid inclusions in the anchizonal part of the High-Ardenne slate belt the salinity varies respectively between 0 and 3.5 eq.wt% NaCl and between 0 and 2.7 eq.wt% NaCl, while in the epizonal part the salinity varies between 0.6 and 17 eq.wt% NaCl and between 3 and 10.6 eq.wt% for the earliest and latest aqueous fluid inclusions, respectively. Although high salinity fluids are often attributed to the original sedimentary setting, the increasing salinity of the fluids that circulated through the Lower Devonian rocks in the High-Ardenne slate belt can be directly attributed to regional metamorphism. More specifically the salinity of the primary fluid inclusions is related to hydrolysis reactions of Cl-bearing minerals during prograde metamorphism, while the salinity of the secondary fluid inclusions is rather related to hydration reactions during retrograde metamorphism. The temporal and spatial distribution of the fluids in the High-Ardenne slate belt are indicative for a closed fluid flow system present in the Lower Devonian rocks during burial and Variscan deformation, where fluids were in thermal and chemical equilibrium with the host rock. Such a closed fluid flow system is confirmed by stable isotope study of the veins and their adjacent host rock for which uniform δ180 values of both the veins and their host rock demonstrate a rock-buffered fluid flow system.  相似文献   

2.
《Journal of Structural Geology》2002,24(6-7):1195-1214
Penetrative deformation occurred ca. 70 Ma ago throughout the northern Valhalla complex in Valhalla and Passmore domes and in the Gwillim Creek shear zone, exposed at the deepest structural levels in both domes. Intense strain (ST) in the Gwillim Creek shear zone (domain II) was synchronous with and outlasted deformation (D2) throughout the northern complex (domain I). Upper-amphibolite facies peak mineral assemblages define the predominant foliation. Temperature and pressure results, determined from microdomains with established relationships to reaction textures and microstructures, provide constraints on conditions under which deformation occurred. Deformation was synchronous with and outlasted peak metamorphic conditions at all structural levels. Peak conditions of 825°C and 730 MPa and 850°C and 840 MPa were determined for domains I and II, respectively. This was followed by cooling and retrograde garnet breakdown at conditions of 715°C and 490 MPa and 765°C and 730 MPa in domains I and II, respectively. The faster cooling rate per kilometer of exhumation for domain II relative to domain I is consistent with a model of conductive cooling via thrusting of domain II on to a cold footwall. Metamorphism is interpreted to have resulted from crustal thickening and burial to depths of ca. 25 km based on an inferred clockwise P–T path and the paucity of Late Cretaceous intrusions. Lack of retrograde metamorphism throughout the complex and the high degree of annealing of microstructures indicates that the rocks remained above greenschist-facies conditions until they were exhumed in the Early Tertiary on the Valkyr–Slocan Lake extensional shear zone system.Previous workers have determined that the peak of metamorphism occurred at 72–67 Ma in a restricted locality in the core of Passmore dome, near Vallican. Our study links this dated metamorphism with the structural evolution and metamorphic history throughout the area, and shows that supracrustal rocks at all structural levels in Valhalla and Passmore domes underwent the same metamorphic and deformation event as those near Vallican. Therefore, we assign a ca. 70 Ma age to the penetrative, high-temperature deformation in northern Valhalla complex and the Gwillim Creek shear zone. This coincides with a major period of shortening in the Rocky Mountains of the Foreland belt. Strain in northern Valhalla complex may represent a local transient shear zone that accommodated crustal thickening in the hinterland during orogen-scale compression, or it may be an exhumed part of the basal detachment of the Rocky Mountains.  相似文献   

3.
Post-metamorphic quartz veins which occur over hundreds of square kilometres in the biotite zone of the Dalradian metamorphic belt consist of three principal types: anhedral quartz with pyrite, anhedral quartz with hematite, and prismatic quartz with hematite or rutile. The oxide minerals in anhedral veins have formed by oxidation of pre-existing sulphides, and gold was mobilized during this oxidation. Anhedral quartz veins formed from an aqueous fluid with up to 5 wt% dissolved salts and 16 wt% CO2 at about 300 °C. Texturally later prismatic quartz crystals formed from a compositionally similar fluid which was undergoing phase separation at the H2O-CO2 solvus at 160–200 °C and 500 to 1200 bars fluid pressure. Oxygen isotope ratios for quartz from the veins range from 12.0 to 15.3‰, with hematite-bearing veins generally isotopically heavier than pyrite-bearing veins. Calculated fluid oxygen isotope ratios range from + 8‰ for pyrite-bearing veins to -2‰ for late prismatic crystals. The mineralizing fluid contained a substantial component of meteoric water whose isotopic and chemical composition evolved with progressive water-rock interaction. Evolution of meteoric fluid composition involved migration of oxidation and oxygen isotope fronts in the down-flow direction as head-driven water passed through structurally controlled fractures in the schist pile. A gold solubility trough occurs for the observed fluid in the oxidation frontal zone. Gold remobilization and reprecipitation occurred progressively as the oxidation front migrated through the schist pile.  相似文献   

4.
Robust quantification of pressure (P)–temperature (T) paths for subduction-related HP/UHP metamorphic rocks is fundamental in recognizing spatial changes in both the depth of detachment from the down-going plate and the thermal evolution of convergent margin sutures in orogenic belts. Although the Chinese southwestern (SW) Tianshan is a well-known example of an accretionary metamorphic belt in which HP/UHP metabasites occur in voluminous host metasedimentary schists, information about the P–T evolution of these rocks in the eastern segment is limited, precluding a full understanding of the development of the belt as a whole. In this study at Kekesu in the eastern segment of the SW Tianshan, we use microstructural evidence and phase equilibrium modelling to quantify the peak and retrograde P–T conditions from two lawsonite-bearing micaschists and an enclosed garnet–epidote blueschist; for two of the samples we also constrain the late prograde P–T path. In the two micaschist samples, relics of prograde lawsonite are preserved in quartz inclusions in garnet, whereas in the metabasite, polymineralic aggregates included in garnet are interpreted as pseudomorphs after lawsonite. For garnet micaschist TK21, which is mainly composed of garnet, phengite/paragonite, albite, chlorite, quartz and relict lawsonite, with accessary rutile, titanite and ilmenite, the maximum P–T conditions for the peak stage are 18.0–19.0 kbar at 480–485°C. During initial exhumation, the retrograde P–T path passed through metamorphic conditions of 15.0–17.0 kbar at 460–500°C. For garnet–glaucophane micaschist TK33, which is mainly composed of garnet, glaucophane, phengite/paragonite, albite, chlorite, quartz, relict lawsonite and minor epidote, with accessary titanite, apatite, ilmenite and zircon, the maximum P conditions for the peak stage are >24.0 kbar at 400–500°C. During exhumation, the P–T path passed through metamorphic conditions of 17.5–18.5 kbar at 485–495°C and 14.0–17.5 kbar at 460–500°C. For garnet–epidote blueschist TK37, which is mainly composed of garnet, glaucophane, epidote, phengite, chlorite, albite and quartz, with accessary titanite, apatite, ilmenite, zircon and calcite, the prograde evolution passed through metamorphic conditions of ~20.0 kbar at ~445°C to Pmax conditions of ~21.5 kbar at 450–460°C and Tmax conditions of 19.5–21.0 kbar at 490–520°C. During exhumation, the rock passed through metamorphic conditions of 17.5–19.0 kbar at 475–500°C, before recording P–T conditions of <17.5 kbar at <500°C. These results demonstrate that maximum recorded pressures for individual samples vary by as much as 6 kbar in the eastern segment of the SW Tianshan, which may suggest exhumation from different depths in the subduction channel. Furthermore, the three samples record similar P–T paths from ~17.0 to 15.0 kbar, which suggests they were juxtaposed at a similar depth along the subduction interface. We compare our new results with published information from eclogites in the same area before considering the wider implications of these data for the orogenic development of the belt as a whole.  相似文献   

5.
The Archaean lode-gold deposits at Norseman, Western Australia, consist of auriferous quartz veins in dextral-reverse ductile-brittle shear zones within tholeiitic metabasalts of upper-greenschist to amphibolite facies metamorphic grade. Three types of deposits (Northern, Central, Southern) are delineated on the basis of their spatial distribution, veining style, alteration mineraloty and metamorphic grade of host rocks. Northern deposits, hosted in upper-greenschist to lower-amphibolite facies rocks, comprise massive to laminated quartz veins with selvedges of quartz-chlorite-calcite-biotite-plagioclase assemblages. Central deposits, hosted in lower-amphibolite facies rocks, consist of laminated to massive quartz veins with selvedges of quartz-actinolite-biotite-plagioclasecalcite assemblages. Southern deposits, hosted in middleamphibolite facies metabasalts, consist of banded quartz-diopside-calcite-microcline-zoisite veins. All deposits exhibit variable ductile deformation of veins and contiguous alteration haloes, consistent with a syn-deformational genesis at high temperatures. From Northern to Southern deposits, the alteration assemblages are indicative of higher temperatures of formation, and there are progressively greater degrees of dynamically recovered textures in alteration and gangue minerals. These observations imply that a thermal variation of gold-related hydrothermal alteration exists within the Norseman Terrane over a distance of 40 km, with TNorthern<TCentral<TSouthern This thermal zonation is corroborated by T−XCO 2 phase relations between vein selvedge assemblages, which signify formation temperatures of approximately 420°–475°C, 470°–495°C and >500°C for Northern, Central and Southern deposits, respectively. The sum of structural, petrographic and mineral chemistry data indicates that the alteration assemblages formed in high-temperature, open hydrothermal systems and have not been subsequently metamorphosed. The thermal differences between the deposit groups may reflect (1) a temperature gradient, at relatively constant P, corresponding to the proximity of the deposits to regional granitoid complexes, or (2) formation of the deposits at progressively deeper crustal levels from north to south. In either case the deposits represent a continuum of gold deposition from upper-greenschist to amphibolite facies, now exposed in an oblique section through the Archaean crust at Norseman.  相似文献   

6.
The giant Jianchaling gold deposit is located in the Shaanxi Province, China. The mineralization is hosted by WNW-trending faults in the Mianxian-Lueyang-Yangpingguan (MLY) area. The mineralization can be divided into three stages based on mineralogical assemblages and crosscutting relationships of mineralized quartz veins. These stages, from early to late, are characterized by the mineral assemblage of: (1) quartz – coarse-grained pyrite – pyrrhotite – pentlandite – dolomite; (2) quartz – pyrite – gold – sphalerite – galena – carbonate – arsenopyrite – fuchsite; and (3) dolomite – calcite – quartz – fine-grained pyrite – realgar – orpiment.Three types of fluid inclusions have been recognized in this study based on petrographic and microthermometric measurements, including pure CO2 and/or CH4 (PC-type), NaCl-H2O (W-type), and NaCl-CO2-H2O (C-type) fluid inclusions. These fluid inclusion types are present in quartz from the Stage 1 and 2 assemblages, whereas the Stage 3 quartz only contains W-type fluid inclusions. The Stage 2 assemblage is associated with the mineralization at the Jianchaling deposit. Fluid inclusions of Stage 1 quartz homogenize mainly between 250° and 360 °C, with salinities up to 15.6 wt.% NaCl equiv., whereas the Stage 3 dolomite with homogenization temperatures of 160° – 220 °C and salinities of 1.1–7.4 wt.% NaCl equiv. This indicates that the ore fluid system evolved from CO2-rich, probably metamorphic hydrothermal to CO2-poor, meteoric fluid. All three types of fluid inclusions can be observed in the Stage 2 quartz, suggesting that this heterogeneous association was trapped from a boiling fluid system. These inclusions homogenized at temperatures of 200°–250 °C and salinities of 1.2–12.4 wt.% NaCl equiv. The estimated trapping pressures of the fluid inclusions are between 117 and 354 MPa in Stage 1, suggesting an alternating lithostatic–hydrostatic fluid system, which was controlled by a fault-valve at the depth of ~ 12 km.Two fuchsite samples collected from the Stage 2 polymetallic-quartz veins yielded well-defined 40Ar/39Ar isotopic plateau ages of 197 ± 2 and 194 ± 2 Ma, and 39Ar/36Ar-40Ar/36Ar normal isochrones of 198 ± 2 and 199 ± 2 Ma. This indicates that the mineralization at Jianchaling is Early Jurassic (ca. 198 Ma) in age. We propose that Jianchaling is an orogenic gold deposit, and formed during continental collision related to the northward subduction of the Mian-Lue oceanic plate during the Early Jurassic. We also conclude that the beginning of the continental collision between the Yangtze and the North China Cratons took place around 200 Ma.  相似文献   

7.
Composite granite–quartz veins occur in retrogressed ultrahigh pressure (UHP) eclogite enclosed in gneiss at General's Hill in the central Sulu belt, eastern China. The granite in the veins has a high‐pressure (HP) mineral assemblage of dominantly quartz+phengite+allanite/epidote+garnet that yields pressures of 2.5–2.1 GPa (Si‐in‐phengite barometry) and temperatures of 850–780°C (Ti‐in‐zircon thermometry) at 2.5 GPa (~20°C lower at 2.1 GPa). Zircon overgrowths on inherited cores and new grains of zircon from both components of the composite veins crystallized at c. 221 Ma. This age overlaps the timing of HP retrograde recrystallization dated at 225–215 Ma from multiple localities in the Sulu belt, consistent with the HP conditions retrieved from the granite. The εHf(t) values of new zircon from both components of the composite veins and the Sr–Nd isotope compositions of the granite consistently lie between values for gneiss and eclogite, whereas δ18O values of new zircon are similar in the veins and the crustal rocks. These data are consistent with zircon growth from a blended fluid generated internally within the gneiss and the eclogite, without any ingress of fluid from an external source. However, at the peak metamorphic pressure, which could have reached 7 GPa, the rocks were likely fluid absent. During initial exhumation under UHP conditions, exsolution of H2O from nominally anhydrous minerals generated a grain boundary supercritical fluid in both gneiss and eclogite. As exhumation progressed, the volume of fluid increased allowing it to migrate by diffusing porous flow from grain boundaries into channels and drain from the dominant gneiss through the subordinate eclogite. This produced a blended fluid intermediate in its isotope composition between the two end‐members, as recorded by the composite veins. During exhumation from UHP (coesite) eclogite to HP (quartz) eclogite facies conditions, the supercritical fluid evolved by dissolution of the silicate mineral matrix, becoming increasingly solute‐rich, more ‘granitic’ and more viscous until it became trapped. As crystallization began by diffusive loss of H2O to the host eclogite concomitant with ongoing exhumation of the crust, the trapped supercritical fluid intersected the solvus for the granite–H2O system, allowing phase separation and formation of the composite granite–quartz veins. Subsequently, during the transition from HP eclogite to amphibolite facies conditions, minor phengite breakdown melting is recorded in both the granite and the gneiss by K‐feldspar+plagioclase+biotite aggregates located around phengite and by K‐feldspar veinlets along grain boundaries. Phase equilibria modelling of the granite indicates that this late‐stage melting records P–T conditions towards the end of the exhumation, with the subsolidus assemblage yielding 0.7–1.1 GPa at <670°C. Thus, the composite granite–quartz veins represent a rare example of a natural system recording how the fluid phase evolved during exhumation of continental crust. The successive availability of different fluid phases attending retrograde metamorphism from UHP eclogite to amphibolite facies conditions will affect the transport of trace elements through the continental crust and the role of these fluids as metasomatic agents interacting with the mantle wedge in the subduction channel.  相似文献   

8.
The newly discovered Jiyuan Cu–Ag–(Pb–Zn–Au) deposit is located in the southern section of the eastern Tianshan orogenic belt, Xinjiang, northwestern China. It is the first documented deposit in the large Aqikekuduke Ag–Cu–Au belt in the eastern Tianshan orogen. Detailed field observations, parageneses, and fluid inclusion studies suggest an epithermal ore genesis for the main Cu–Ag mineralization, accompanied by a complicated hydrothermal alteration history most likely associated with the multi-stage tectonic evolution of the eastern Tianshan. The Jiyuan Cu–Ag ore bodies are located along the EW-striking, south-dipping Aqikekuduke fault and are hosted by Precambrian marble and intercalated siliceous rocks. Early-stage skarn alteration occurred along the contact zone between the marble layers and Early Carboniferous diorite–granodiorite and monzogranite intrusions; the skarns are characterized by diopside–tremolite–andradite–pyrite–(magnetite) assemblages. Local REE-enriched synchysite–rutile–arsenopyrite–(clinochlorite–microcline–albite) assemblages are related to K–Na alteration associated with the monzogranite intrusions and formed under conditions of high temperature (310°C) and high salinity (19.9 wt.% NaCl). Subsequent hydrothermal alteration produced a series of quartz and calcite veins that precipitated from medium- to low-temperature saline fluids. These include early ‘smoky’ quartz veins (190°C; 3.0 wt.% NaCl) that are commonly barren, coarse-grained Cu–Ag mineralized quartz veins (210°C; 2.4 wt.% NaCl), and late-stage unmineralized calcite veins (140°C; 1.1 wt.% NaCl). Tremolite and Ca-rich scapolite veins formed at an interval between early and mineralized quartz veins, indicating a high-temperature, high-salinity (>500°C; 9.5 wt.% NaCl) Ca alteration stage. Fluid mixing may have played an important role during Cu–Ag mineralization and an external low-temperature Ca-rich fluid is inferred to have evolved in the ore-forming system. The Jiyuan auriferous quartz veins possess fluid characteristics distinct from those of the Cu–Ag mineralized quartz veins. CO2-rich fluid inclusions, fluid boiling, and mixing all demonstrate that these auriferous quartz veins acted as hosts for the orogenic-type gold mineralization, a common feature in the Tianshan orogenic belt.  相似文献   

9.
Jadeite‐bearing kyanite eclogite has been discovered in the Iratsu body of the Sanbagawa belt, SW Japan. The jadeite + kyanite assemblage is stable at higher pressure–temperature (P–T) conditions or lower H2O activity [a(H2O)] than paragonite, although paragonite‐bearing eclogite is common in the Sanbagawa belt. The newly discovered eclogite is a massive metagabbro with the peak‐P assemblage garnet + omphacite + jadeite + kyanite + phengite + quartz + rutile. Impure jadeite is exclusively present as inclusions in garnet. The compositional gap between the coexisting omphacite (P2/n) and impure jadeite (C2/c) suggests relatively low metamorphic temperatures of 510–620 °C. Multi‐equilibrium thermobarometry for the assemblage garnet + omphacite + kyanite + phengite + quartz gives peak‐P conditions of ~2.5 GPa, 570 °C. Crystallization of jadeite in the metagabbro is attributed to Na‐ and Al‐rich effective bulk composition due to the persistence of relict Ca‐rich clinopyroxene at the peak‐P stage. By subtracting relict clinopyroxene from the whole‐rock composition, pseudosection modelling satisfactorily reproduces the observed jadeite‐bearing assemblage and mineral compositions at ~2.4–2.5 GPa, 570–610 °C and a(H2O) >0.6. The relatively high pressure conditions derived from the jadeite‐bearing kyanite eclogite are further supported by high residual pressures of quartz inclusions in garnet. The maximum depth of exhumation in the Sanbagawa belt (~80 km) suggests decoupling of the slab–mantle wedge interface at this depth.  相似文献   

10.
An eclogite has been recently identified within ophiolitic mélange in the western segment of the Bangong Co–Nujiang suture zone, at Shemalagou in the Gaize area of central Tibet. The eclogite consists of garnet, omphacite, phengite, rutile, quartz, diopside, and amphibole. The omphacite, which has not been recognized in the suture zone until this study, occurs as rare relics within diopside grains in the eclogite. Phase equilibria modeling shows that the eclogite formed under P–T conditions of 22–28 kbar and 600–650 °C with a low geothermal gradient of ca. 8 °C/km, suggesting that it formed during the subduction of oceanic crust. The protoliths of the eclogite and coexisting garnet amphibolites have geochemical characteristics similar to those of normal mid-ocean ridge basalt (N-MORB), confirming that the eclogites formed from oceanic crust. The presence of high-pressure (HP) eclogite indicates that the ophiolitic mélange in the Bangong Co–Nujiang suture zone underwent oceanic subduction and was subsequently exhumed. We conclude that this ophiolitic belt represents a newly identified HP metamorphic belt in the Tibetan Plateau, adding to the previously recognized Songduo and Longmucuo–Shuanghu eclogite belts. This discovery will result in an improved understanding of the tectonic evolution of the Bangong Co–Nujiang suture zone and the Tibetan Plateau as a whole.  相似文献   

11.
《地学前缘(英文版)》2020,11(6):1915-1934
The first data on P-T metamorphic conditions coupled with U-Pb monazite and zircon age obtained for the Neoarchean Kitoy granulite-gneiss terrane (SW Siberian Craton). Alumina gneisses of the Kitoy terrane indicate two-staged metamorphic evolution. The first stage of regional metamorphism (M1) occurred at high-amphibolite facies conditions at T ​= ​780–800 ​°C and P ​= ​8–9 ​kbar. The second stage (M2) belongs to MT-HT/LP type of metamorphism with the wide temperature interval 600–750 ​°C and pressure 2–4 ​kbar. Two age peaks were established on the basis of U-Pb monazite and zircon dating in garnet-anthophyllite gneisses. Both of them correspond to the Neoarchean age: the age of M1 falls into the interval of ca. 2489–2496 ​Ma, the age of M2 – ca. 2446–2456 ​Ma. The high-temperature metamorphism of the Kitoy block and nearly coeval granitoid magmatism can be an evidence for the Neoarchean collision in SW Siberian craton.  相似文献   

12.
Antimony-rich vein mineralisation is widespread in the German part of the Variscan orogenic belt. Mineralogical investigation of a representative suite of these deposits, coupled with fluid inclusion characterisation and microthermometry, permits a reconstruction of their genetic evolution. Two structural settings host antimony mineralisation: the cores or flanks of anticlinal zones and major lithological contrasts. Channelled migration of geothermal fluids through permeable rock sequences and later stagnation of fluids in cap-rock situations inside the anticlinal zones led to mineral deposition. The mineralising event is interpreted as relating to input of deep-sourced fluids during late-orogenic exhumation at the transitional stage between collision tectonics and the late-Variscan extensional regime. Fluid inclusion data, chlorite geothermometry and the presence of meneghinite as a characteristic Pb-Sb-sulfosalt mineral in a number of vein systems allows constraints on model P-T conditions at the onset of mineralisation to be made. These are as high as 390 to 440?°C at 0.6–1.0?kbar for the Saarsegen, Apollo and Schöne Freundschaft deposits, with lower temperatures of 320–340?°C being obtained for the Spes deposit. The fluid inclusion data indicate drastic fluid cooling during the mineralising event; minimum temperatures of approximately 150–220?°C are obtained for all deposits at the end of vein quartz formation, which coincided with deposition of stibnite and most of the Pb-Sb sulfosalts. Besides the formation of extensional quartz-stibnite-Pb-sulfosalt veins, the mineralising, low-salinity NaCl-KCl-rich high-temperature tectonic brines have overprinted sulfide assemblages within earlier siderite-(Cu)-Pb-Zn veins. This has led to replacement reaction textures and remobilisation of sulfide components within the vein systems. In contrast with the earlier siderite-(Cu)-Pb-Zn veins, neither the quartz-stibnite-sulfosalt nor the (Cu)-Pb-Sb sulfosalt assemblages were affected by Variscan deformation. Rather, they display characteristic extensional features crosscutting all earlier structures and can thus be assigned to a later phase of mineralisation. Fluid composition characteristics and structural criteria indicate formation in the latest part of the Variscan mineralisation cycle; a post-Variscan genesis being rejected on grounds of conspicuously diverging fluid characteristics. A comparison of antimony deposits in the Rheinisches Schiefergebirge with other late-orogenic deposits elsewhere in the European Variscan belt indicates a significant number of shared features, enabling them to be placed into a common model related to the onset of late-Variscan brittle extensional tectonics.  相似文献   

13.
We describe the structure, microstructures, texture and paleopiezometry of quartz-rich phyllites and marbles along N-trending Moutsounas shear zone at the eastern margin of the Naxos metamorphic core complex (MCC). Fabrics consistently indicate a top-to-the-NNE non-coaxial shear and formed during the main stage of updoming and exhumation between ca. 14 and 11 Ma of the Naxos MCC. The main stage of exhumation postdates the deposition of overlying Miocene sedimentary successions and predates the overlying Upper Miocene/Pliocene conglomerates. Detailed microstructural and textural analysis reveals that the movement along the Moutsounas shear zone is associated with a retrograde greenschist to subgreenschist facies overprint of the early higher-temperature rocks. Paleopiezometry on recrystallized quartz and calcite yields differential stresses of 20–77 MPa and a strain rate of 10−15–10−13 s−1 at 350 °C for quartz and ca. 300 °C for calcite. Chlorite geothermometry of the shear zone yields two temperature regimes, 300–360 °C, and 200–250 °C. The lower temperature group is interpreted to result from late-stage hydrothermal overprint.  相似文献   

14.
Gold mineralisation in classic Australian slate belt gold deposits at Ballarat, Bendigo, St. Arnaud and Inglewood occurred very late in the orogenic history of these rocks rather than during formation of the main slaty cleavage. This has been revealed through the examination of microstructural relationships in gold-bearing quartz veins and their host rocks from these deposits, which has established a D1 to D4 deformation-stage history and consistent timing for gold mineralisation over a wide area. The gold was deposited synorogenically but during the fourth deformation stage (D4) of the orogeny, a relatively weak event occurring two deformations after the main slaty cleavage producing event, D2. Previously, D2 had been regarded as both the source and control of gold mineralisation as most of the quartz veins that occur in these deposits formed before or during this deformation event. However, most gold is hosted in breccia veins that formed during D4. The wallrock clasts within these breccia veins contain a young rotated foliation and the breccia veins are spatially associated with a paragenetically consistent alteration of the host rocks in the deposits. This alteration both crosscuts and preferentially mineralises wallrock S4 allowing the timing of the breccia veins, alteration and gold deposition to be defined as syn-D4 in age.  相似文献   

15.
The Wangfeng gold deposit is located in Western Tian Shan and the central section of the Central Asian Orogenic Belt (CAOB). The deposit is mainly hosted in Precambrian metamorphic rocks and Caledonian granites and is structurally controlled by the Shenglidaban ductile shear zone. The gold orebodies consist of gold-bearing quartz veins and altered mylonite. The mineralization can be divided into three stages: quartz–pyrite veins in the early stage, sulfide–quartz veins in the middle stage, and quartz–carbonate veins or veinlets in the late stage. Ore minerals and native gold mainly formed in the middle stage. Four types of fluid inclusions were identified based on petrography and laser Raman spectroscopy: CO2–H2O inclusions (C-type), pure CO2 inclusions (PC-type), NaCl–H2O inclusions (W-type), and daughter mineral-bearing inclusions (S-type). The early-stage quartz contains only primary CO2–H2O fluid inclusions with salinities of 1.62 to 8.03 wt.% NaCl equivalent, bulk densities of 0.73 to 0.89 g/cm3, and homogenization temperatures of 256 °C–390 °C. Vapor bubbles are composed of CO2. The middle-stage quartz contains all four types of fluid inclusions, of which the CO2–H2O and NaCl–H2O types yield homogenization temperatures of 210 °C–340 °C and 230 °C–300 °C, respectively. The CO2–H2O fluid inclusions have salinities of 0.83 to 9.59 wt.% NaCl equivalent and bulk densities of 0.77 to 0.95 g/cm3, with vapor bubbles composed of CO2, CH4, and N2. Fluid inclusions in the late-stage quartz are NaCl–H2O solution with low salinities (0.35–3.87 wt.% NaCl equivalent) and low homogenization temperatures (122 °C–214 °C). The coexistence of inclusions of these four types in middle-stage quartz suggests that fluid boiling occurred in the middle-stage mineralization. Trapping pressures estimated from CO2–H2O inclusions are 110–300 MPa and 90–250 MPa for the early and middle stages, respectively, suggesting that gold mineralization mainly occurred at depths of about 10 km. In general, the Wangfeng gold deposit originated from a metamorphic fluid system characterized by low salinity, low density, and enrichment of CO2. Depressurized fluid boiling caused gold precipitation. Given the regional geology, ore geology, fluid-inclusion features, and ore-forming age, the Wangfeng gold deposit can be classified as a hypozonal orogenic gold deposit.  相似文献   

16.
Prograde P–T paths recorded by the chemistry of minerals of subduction‐related metamorphic rocks allow inference of tectonic processes at convergent margins. This paper elucidates the changing P–T conditions during garnet growth in pelitic schists of the Sambagawa metamorphic belt, which is a subduction related metamorphic belt in the south‐western part of Japan. Three types of chemical zoning patterns were observed in garnet: Ca‐rich normal zoning, Ca‐poor normal zoning and intrasectoral zoning. Petrological studies indicate that normally‐zoned garnet grains grew keeping surface chemical equilibrium with the matrix, in the stable mineral assemblage of garnet + muscovite + chlorite + plagioclase + paragonite + epidote + quartz ± biotite. Pressure and temperature histories were inversely calculated from the normally‐zoned garnet in this assemblage, applying the differential thermodynamic method (Gibbs' method) with the latest available thermodynamic data set for minerals. The deduced P–T paths indicate slight increase of temperature with increasing pressure throughout garnet growth, having an average dP/dT of 0.4–0.5 GPa/100 °C. Garnet started growing at around 470 °C and 0.6 GPa to achieve the thermal and baric peak condition near the rim (520 °C, 0.9 GPa). The high‐temperature condition at relatively low pressure (for subduction related metamorphism) suggests that heating occurred before or simultaneously with subduction.  相似文献   

17.
New 40Ar/39Ar geochronological data suggest orogenic gold mineralisation at the Ballarat East deposit, southeast Australia, occurred in three main episodes at ca. 445–435 Ma, ca. 420–415 Ma and ca. 380–370 Ma. The gold mineralisation is localised in muscovite-bearing quartz and quartz-carbonate veins hosted in the steep faults (70–90°), on limbs of tight and isoclinal folds in an Ordovician turbidite sequence, and within west-dipping (≤45°) faults, historically known as leather jacket lodes. Initiation of the ≤45° faults that are confined to fold culminations, begins at ca. 445 Ma, with peak metamorphic conditions at 440 Ma. The earliest vein sets (V1), were emplaced on limb thrusts at ca. 445–435 Ma and are characterised by arsenopyrite-dominated quartz veins. These V1 veins parallel arsenopyrite-rich shale units, historically referred to as ‘indicator beds’. Both the steep and ≤45° faults were reactivated during fold amplification with deposition of the V2 auriferous veins at ca. 420–415 Ma. A later set of auriferous veins (V3–V4) with ages of 380–370 Ma, dominated by pyrite-sphalerite-galena-white-mica quartz-(V3) or carbonate-rich (V4) veins are predominantly associated with reactivation of the ≤45° west-dipping faults. This new geochronological data constrains the local kinematic history of the Ballarat East deposit and has regional implications. The V1–V2 vein development appears to be synchronous across the entire western section of the Lachlan Orogen, where previous studies have suggested that initial gold mineralisation was linked to orogenesis at ∼440 Ma, as a result of metamorphic devolatilisation reactions in the lower crust. In contrast, a close spatial and temporal relationship exists between the felsic dykes and the mineralisation recognised in the V3–V4 veins. The deformation that accompanies V3–V4 vein development is attributed to small, localised events during east-west shortening, utilising pre-existing fold and fault structures. The origin of the fluids producing the V3–V4 veins may be metamorphic devolatilisation associated with widespread felsic magmatism that occurred at this time across central Victoria.  相似文献   

18.
A prominent set of veins was formed during post-metamorphic deformation of the Caledonian Dalradian metamorphic belt. These veins are concentrated in dilational zones in fold hinges, but apophyses follow schistosity and fold axial surface fractures. The veins are most common in the cores of regional structures, especially the Dalradian Downbend and consist of quartz, calcite, chlorite and metallic sulphides and oxides. Metals, including gold, have been concentrated in the veins. The fluid which formed the veins was low salinity (1–5 wt% NaCl and KCl) CO2-bearing (3–16 wt% CO2) water of metamorphic origin. The fluid varies slightly in composition within and between samples, but is essentially uniform in composition over several hundred km2. Vein formation occurred at about 350±50 °C and 200–300 MPa pressure. Further quartz mineralization occurred in some dilational zones at lower temperatures (160–180 °C). This later mineralization was accompanied by CO2 immiscibility. Dilution and oxidation of the metamorphic fluid occurred due to mixing with meteoric water as the rocks passed through the brittle-ductile transition. A similar metamorphic fluid is thought to have been responsible for gold mineralization in the nearby Tyndrum Fault at a later stage in the Dalradian uplift.  相似文献   

19.
The Laowan metallogenic belt in China is an important metallogenic belt within the Tongbai orogenic belt, and contains the medium-sized Laowan and Shangshanghe gold deposits, the small Huangzhuyuan lead–zinc–silver–gold deposit and some gold and Cu–Pb occurrences. These deposits are hosted in Mesoproterozoic plagioclase amphibolite (or schist) and mica-quartz schist. The gold ores are mainly quartz veins and veinlets and disseminated altered ores. Subordinate ore types include massive sulfides and breccias. The Laowan gold deposit is characterized by three right-stepping en-echelon fracture-controlled alteration zones that dip gently to the south and includes disseminated, sheeted and stockwork ores. These lodes were formed by the interaction of ore-forming fluid with foliated-to laminated cataclasite within the transpressional faults. The Shangshanghe gold deposit is characterized by parallel ore lodes that dip steeply to the north, and includes quartz veins and breccias in addition to ores in altered wallrocks. These lodes were formed by focusing of fluids into transtensional faults. These ore controlling faults displaced early barren quartz veins 10 m horizontally with a dextral sense of motion. The ore-hosting structures at the Laowan and Shangshanghe deposits correspond to the P and R-type shears of a brittle dextral strike-slip fault system, respectively, which make angles of about 15° and − 15° to the Laowan and Songpa boundary faults. The ore-controlling fault system post-dated formation of a ductile shear zone, and peak regional metamorphism. This precludes a genetic relationship between hydrothermal mineralization and regional metamorphism and ductile shear deformation. These gold deposits are not typical orogenic gold deposits. The metallogenic belt displays district-scale-zoning of Mo → Cu–Pb–Zn–Ag → Au relative to Songpa granite porphyry dike zone, suggesting the mineralization may be closely related to the granite porphyry. Measured δ34S of sulfides and δ18O and δD of fluid inclusion waters in auriferous quartz also are consistent with a magmatic source for sulfur and ore fluids. The similarity of Pb isotope ratios between the ores and Yanshanian granitoids suggests a similar source. As the age (139 ± 3 Ma) of granite porphyry obtained by zircon U–Pb isotope overlaps the mineralization age (138 ± 1 Ma: Zhang et al., 2008a), the gold and polymetallic metallogenesis of the Laowan gold belt has close spatial, temporal and possibly genetic relationships with Yanshanian high level magmatism.  相似文献   

20.
This work deals with structural and geochemical (chemical and isotopic) analyses of calcite veins hosted in Carrara marbles in the Alpi Apuane, NW Tuscany, Italy. Geometric features and spatial distribution of veins provided estimations of stress ratio (Φ = (σ2 − σ3)/(σ1 − σ3)), driving stress ratio (R′ = (Pf − σ3)/(σ1 − σ3)) and fluid overpressure (Δsi = Pf − σ3) at the time of vein formation. The obtained values of Φ = 32 and R′ = 0.43 reveal that fluid pressure was higher than the intermediate principal stress at the time of veins formation, whereas the estimated Δsi ranging from 129 to 207 MPa indicates that veins formed under supra-hydrostatic to lithostatic pressure conditions. Carbon (δ13CV-PDB = 1.81–2.10‰ for veins and 1.95–2.51‰ for host marbles), oxygen (δ18OV-SMOW = 28.71–29.57‰ for veins and 28.90–29.36‰ for host marbles) and strontium (87Sr/86Sr = 0.707716–0.707985 for veins and 0.0707708–0.707900 for host marbles) isotope compositions in vein/host marble pairs were internally quite consistent. Combining our structural and geochemical data, a modeling approach was performed to investigate the compositional features and temperatures of calcite depositing fluids. The results of our studies give evidence that (1) pore-fluids in Carrara marble, consisting of metamorphic formation waters, were re-mobilized during veining event and migrated within the veins in closed system conditions, (2) veins formed after ductile folding phases and before high-angle brittle faulting events, at temperature and pressure around 250 °C and 210 MPa, and finally (3) about 12 g H2O/m3 marble are calculated to have been available as vein parental fluid at the time of vein formation.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号