首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Mikhail Yu. Zolotov 《Icarus》2009,204(1):183-193
The dwarf planet Ceres has a density of 2040-2250 kg m−3, and a dark non-icy surface with signs of hydrated minerals. As opposed to a differentiated internal structure with a nonporous rocky core and a water mantle, there are arguments for undifferentiated porous interior structure. Ceres’ mass and dimensions are uncertain and do not exclude undifferentiated interior even if hydrostatic equilibrium is attained. The rocky surface may be inconsistent with a large-scale water-rock differentiation. A differentiated structure with a thick water mantle below a rocky crust is gravitationally unstable and an overturn would have led to abundant surface salt deposits, which are not observed. A formation of hydrated surface minerals caused by internal heating implies a major density increase through devolatilization of the interior. A later accumulation of hydrated materials is inconsistent with anhydrous surfaces of many asteroids and with a low rate of the cosmic dust deposition in the inner Solar System. Ceres’ internal pressures (<140-200 MPa) are insufficient to significantly reduce porosity of chondritic materials and there is no need for abundant water phases to be present to account for the bulk density. Having the porosity of ordinary chondrites (∼10%), Ceres can consist of rocks with the grain density of pervasively hydrated CI carbonaceous chondrites. However, additional low-density phases (e.g., water ice) require to be present in the body with the grain density of CM chondrites. The likely low-density mineralogy of the interior implies Ceres’ accretion from pervasively aqueously altered carbonaceous planetesimals depleted in short-lived radionuclide 26Al. Abundant water ice may not have accreted. Limited heat sources after accretion may not have caused major mineral dehydration leading to formation of water mantle. These inferences can be tested with the Dawn spacecraft in 2015.  相似文献   

2.
Thermal evolution modeling has yielded a variety of interior structures for Ceres, ranging from a modestly differentiated interior to more advanced evolution with a dry silicate core, a hydrated silicate mantle, and a volatile‐rich crust. Here we compute the mass and hydrostatic flattening from more than one hundred billion three‐layer density models for Ceres and describe the characteristics of the population of density structures that are consistent with the Dawn observations. We show that the mass and hydrostatic flattening constraints from Ceres indicate the presence of a high‐density core with greater than a 1σ probability, but provide little constraint on the density, allowing for core compositions that range from hydrous and/or anhydrous silicates to a mixture of metal and silicates. The crustal densities are consistent with surface observations of salts, water ice, carbonates, and ammoniated clays, which indicate hydrothermal alteration, partial fractionation, and the possible settling of heavy sulfide and metallic particles, which provide a potential process for increasing mass with depth.  相似文献   

3.
The formation of hydrated salts is an expected consequence of aqueous alteration of Main Belt objects, particularly for large, volatile‐rich protoplanets like Ceres. Sulfates, present on water‐bearing planetary bodies (e.g., Earth, Mars, and carbonaceous chondrite parent bodies) across the inner solar system, may contribute to Ceres’ UV and IR spectral signature along with phyllosilicates and carbonates. We investigate the presence and stability of hydrated sulfates under Ceres’ cryogenic, low‐pressure environment and the consequent spectral effects, using UV–Vis–IR reflectance spectroscopy. H2O loss begins instantaneously with vacuum exposure, measured by the attenuation of spectral water absorption bands, and a phase transition from crystalline to amorphous is observed for MgSO4·6H2O by X‐ray powder diffraction. Long‐term (>40 h), continuous exposure of MgSO4·nH2O (n = 0, 6, 7) to low pressure (10?3–10?6 Torr) causes material decomposition and strong UV absorption below 0.5 μm. Our measurements suggest that MgSO4·6H2O grains (45–83 μm) dehydrate to 2% of the original 1.9 μm water band area over ~0.3 Ma at 200 K on Ceres and after ~42 Ma for 147 K. These rates, inferred from an Avrami dehydration model, preclude MgSO4·6H2O as a component of Ceres’ surface, although anhydrous and minimally hydrated sulfates may be present. A comparison between Ceres emissivity spectra and laboratory reflectance measurements over the infrared range (5–17 μm) suggests sulfates cannot be excluded from Ceres’ mineralogy.  相似文献   

4.
Using recent constraints on the shape and density of (2) Pallas, we model the thermal evolution of the body as a function of possible formation scenarios that differ in the time of formation and composition assumed for the protoplanet. We develop possible evolution scenarios for Pallas and compare these to available observations. Our models imply two distinct types of end states: those with a hydrosphere and silicate core, and those where the body is dominated by hydrated silicates. We show that for an initial ice-rock mixture with density 2400 kg/m3, Pallas is likely to differentiate and form a rocky core and icy shell. If Pallas accreted from material with lower initial ice content, our models indicate that Pallas’s interior is dominated by hydrated silicates, possibly with a core of anhydrous silicates.We also investigate the possibility that Pallas’s initial density was similar to Ceres’, i.e., that it formed from an ice–rock mixture of density 2100 kg/m3. This implies that the object lost a significant fraction of its hydrosphere as a consequence of thermal oscillations and impacts, a distinct possibility given its density, evidence for impact excavation and current orbital parameters. Its blue spectral slope and observed surface variation may also be evidence for such a process (e.g. Jewitt, D.C. [2002]. Astron. J. 123, 1039–1049; Schmidt, B.E. et al. [2009]. Science 326, 275–279; Yang, B., Jewitt, D. [2010]. Astron. J. 140, 692–698). If Pallas still contains a thin layer of water ice, then that layer corresponds to the bottom of a former icy shell, and as such, could be enriched in non-ice materials such as organics. We evaluate the likeliness of each scenario and show the general magnitude of water loss processes for Pallas. Given a balance of observational and theoretical constraints, we favor a water-rich accretion for Pallas that implies that Pallas has lost a significant fraction of its initial water content through exogenic processes since its internal evolution ceased. We also discuss implications of this work to other hydrated asteroids.  相似文献   

5.
As the Dawn mission approaches a successful conclusion at Ceres, it seems time to assess how its findings have sharpened the picture of Ceres’s evolution. Before Dawn, we inferred from Ceres's bulk density of about 2100 kg m?3 that Ceres contained about 25% water by mass. Thermodynamic modeling of the interior evolution suggested that the original accreted ice had to melt even if only long‐lived radionuclides were present, leading to the aqueous alteration of the original chondritic silicates and differentiation of the altered silicates from any remaining water, consistent with telescopic detection of aqueously altered silicates (serpentine and clay minerals) on Ceres’s surface. Earth‐based observations of Ceres’s shape were not accurate enough to constrain the extent of differentiation of its interior. Dawn's results confirm these early findings and extend them dramatically to reveal an evolved and active small planet, probably even today, due to water/ice‐driven processes. A nearly uniform global distribution of surface mineralogy, which includes Mg‐serpentines, ammoniated clays, and salts including carbonates, suggests extensive, endogenous, planet‐wide aqueous alteration. Local exceptions show salt‐rich deposits of varied composition, which suggests subsurface heterogeneities. Concentration of Fe below carbonaceous chondrite levels suggests chemical fractionation, leading to Ceres being chemically differentiated. The high spatial uniformity of element abundance measurements of equatorial regolith also indicates that some ice‐rock fractionation occurred on a global scale. Even some local exposures of ice are seen, especially in higher latitudes and in low‐illumination regions that must be very young, as surface water ice is unstable on time scales of 1–1000 years under Ceres’s surface temperatures. Subsurface ice is also likely in abundance at higher latitudes in at least the upper few meters of the surface, as suggested by near‐surface H‐rich polar deposits. Observations of bright ice deposits in permanently shadowed regions suggest cold‐trapping of migrating H2O across the surface. Gravity field measurements indicate a concentration of mass toward the center and near isostatic equilibrium, consistent with at least some mass differentiation driven by water‐related processes. Abundant small and midsize craters but relaxed or missing large craters suggest a stiff upper crust with water abundance lower than 30 vol%. A sharp decrease in viscosity at ~40 km depth suggests the occurrence of a small fraction of liquid, consistent with earlier thermophysical models. Surface cryogenic features, such as flows, extrusions, and domes, some geologically very recent, are evidence of active water/ice‐driven subsurface processes. Ceres experienced extensive water‐related processes and at least some mass and chemical fractionation and is probably active today, consistent with previous moderate heating thermodynamic models. Clearly, Ceres is a “wet,” evolved planet at the edge of the inner solar system, as described in this special issue. We conclude with a list of questions suggested by the Dawn findings; they especially regard the state and fate of water and its role in driving past and possibly current chemical and physical activity in this dwarf planet.  相似文献   

6.
We model Ceres’ thermo-physical-chemical evolution by considering a large range of initial conditions as well as various evolutionary scenarios. Models are constrained by available shape measurements, which point to a differentiated interior for Ceres. We address the role played by hydrothermal activity in the long-term evolution of Ceres and especially the evolution of its hydrosphere. We suggest that models with times of formation shorter than about 5 My after the production of calcium-aluminum inclusions are more likely to undergo hydrothermal activity in their early history, which affects Ceres’ long-term thermal evolution. We evaluate the conditions for preserving liquid water inside Ceres, a possibility enhanced by its warm surface temperature and the enrichment of its hydrosphere in a variety of chemical species. However, thermal modeling of the hydrosphere needs to be further investigated. We show that shape data can help constrain the amount of hydrated silicate in the core, and thus the extent of hydrothermal activity in Ceres. We discuss the importance of these results for the Dawn mission’s arrival at Ceres in 2015.  相似文献   

7.
The Visible and Infrared Spectrometer (VIR) instrument on the Dawn mission observed Ceres’s surface at different spatial resolutions, revealing a nearly uniform global distribution of surface mineralogy. Clearly, Ceres experienced extensive water‐related processes and chemical differentiation. The surface is mainly composed of a dark component (carbon, magnetite?), Mg‐phyllosilicates, ammoniated clays, carbonates, and salts. The observed species suggest endogenous, global‐scale aqueous alteration. While mostly uniform at regional scale, Ceres’s surface shows small localized areas with different species and/or variations in abundances. Few local exposures of water ice are seen, especially at higher latitudes. Sodium carbonates have been identified in several areas on the surface, notably in Occator bright faculae. Organic matter has also been discovered in several places, most conspicuously in a large area close to the Ernutet crater. The observed mineralogies, with the presence of ammoniated species and sodium salts, have a strong resemblance to materials found on other bodies of the outer solar system, such as Enceladus. This poses some questions about the original material from which Ceres accreted, suggesting a colder environment for such material with respect to Ceres’s present position.  相似文献   

8.
High‐energy gamma rays (HEGRs) from Ceres’s surface were measured using Dawn's Gamma Ray and Neutron Detector (GRaND). Models of cosmic‐ray‐initiated gamma ray production predict that the HEGR flux will inversely vary with single‐layer hydrogen concentrations for Ceres‐like compositions. The measured data confirm this prediction. The hydrogen‐induced variations in HEGR rates were decoupled from the measurements by detrending the HEGR data with Ceres single‐layer hydrogen concentrations determined by GRaND neutron measurements. Models indicate that hydrogen‐detrended HEGR counting rates correlate with water‐free average atomic mass, which is denoted as <A>*. HEGR variations across Ceres’s surface are consistent with <A>* variations of ±0.5 atomic mass units. Chemical variations in the CM and CI chondrites, our closest analogs to Ceres’s surface, suggest that <A>* variations on Ceres are primarily driven by variations in the concentration of Fe, although other elements such as Mg and S could contribute. Dawn observations have shown that Ceres’s interior structure and surface composition have been modified by some combination of physical (i.e., ice‐rock fractionation) and/or chemical (i.e., alteration) processes that has led to variations in bulk surface chemistry. Locations of the highest inferred <A>* values, and thus possibly the highest Fe and least altered materials, tend to be younger, less cratered surfaces that are broadly associated with the impact ejecta of Ceres’s largest craters.  相似文献   

9.
High resolution spectroscopic observations of asteroid 2 Pallas from 1.7-3.5 μm are reported. These data are combined with previous measurements from 0.4-1.7 μm to interpret Pallas' surface mineralogy. Evidence is found for low-Fe2+ hydrated silicates, opaque components, and low-Fe2+ anhydrous silicates. This assemblage is very similar to carbonaceous chondrite matrix material such as is found in type CI and CM meteorites, but it has been subjected to substantial aqueous alteration and there is a major extraneous anhydrous silicate component. This composition is compared to that of asteroid 1 Ceres. Although there are substantial differences in their broad band spectral reflectances, it appears that both asteroids are genetically related to known carbonaceous chondrites.  相似文献   

10.
Abstract— We review the meteoritical and astronomical literature to answer the question: What is the evidence for the importance of ordinary chondritic material to the composition of the asteroid belt? From the meteoritical literature, we find that currently (1) our meteorite collections sample at least 135 different asteroids; (2) out of 25+ chondritic meteorite parent bodies, 3 are (by definition) ordinary chondritic; (3) out of 14 chondritic grouplets and unique chondrites, 11 are affiliated with a carbonaceous group/clan of chondrites; (4) out of 24 differentiated groups of meteorites, only the HE iron meteorites clearly formed from ordinary chondritic precursor material; (5) out of 12 differentiated grouplets and unique differentiated meteorites, 8 seem to have had carbonaceous chondritic precursors; (6) a high frequency of carbonaceous clasts in ordinary chondritic breccias suggests that ordinary chondrites have been embedded in a swarm of carbonaceous material. The rare occurrence (only one example) of ordinary chondritic clasts in carbonaceous chondritic breccias indicates that ordinary chondritic material has not been widespread in the asteroid belt; (7) cosmic spherules, micrometeorites, and stratospheric interplanetary dust particles—believed to represent a less biased sampling of asteroidal material—show that only a very small fraction (less than ～1%) of asteroidal dust has an ordinary chondritic composition. From the astronomical literature, we find that currently (8) spectroscopic surveys of the main asteroid belt are finding more and more nonordinary chondritic primitive material in the inner main belt; (9) the increase in spectroscopic data has increased the inferred mineralogical diversity of main belt asteroids; and (10) no ordinary chondritic asteroids have been directly observed in the main belt. These lines of evidence strongly suggest a scenario in which ordinary chondritic asteroids were never abundant in the main belt. The S-type asteroids may currently be primarily differentiated, but the precursor material is more likely to have been carbonaceous chondritic, not ordinary chondritic. Historically, carbonaceous material could have dominated the entire main belt. This could explain the presence in the inner main belt of asteroids linked to the primitive carbonaceous chondrites, and the absence of asteroids linked to the ordinary chondrites. The implications of this scenario for the asteroid heating mechanism(s) are briefly discussed.  相似文献   

11.
Abstract– A petrographic and geochemical study was undertaken to characterize Jiddat al Harasis (JaH) 556, a howardite find from the Sultanate of Oman. JaH 556 is a polymict impact melt breccia containing highly shocked clasts, including mosaicized olivine and recrystallized plagioclase, set in a finely recrystallized vesicular matrix (grain diameter <5–10 μm). Plagioclase (An76–92) and clinopyroxene (En48–62Wo7–15) are associated with orthopyroxene and olivine clasts like in a howardite. JaH 556 oxygen isotope data indicate that it has an anomalous bulk‐rock composition as howardite, resulting from a mixture between HED material and at least one second reservoir characterized by a higher Δ17O. The bulk meteorite has a composition consistent with howardites, but it is enriched in siderophile elements (Ni = 3940 and Co = 159 ppm) arguing for a chondritic material as second reservoir. This is independently confirmed by the occurrence of chondrule relics composed of olivine (Fo56–80), orthopyroxene (En79Wo2), and plagioclase (An61–66). Based on oxygen isotopic signature, siderophile composition, and chondrule core Mg number (Fo80 and En79Wo2), it is proposed that JaH 556 is a howardite containing approximately 20% H chondrite material. This percentage is high compared with that observed petrographically, likely because chondritic material dissolved in the impact melt. This conclusion is supported by the observed reaction of orthopyroxene to olivine, which is consistent with a re‐equilibration in a Si‐undersaturated melt. JaH 556’s unique composition enlarges the spectrum of howardite‐analogs to be expected on the surface of 4 Vesta. Our data demonstrate that oxygen isotopic anomalies can be produced by a mixture of indigenous and impactor materials and must be interpreted with extreme caution within the HED group.  相似文献   

12.
Diagnostic infrared spectra of individual nanogram-sized interplanetary dust particles (IDPs) collected in the Earth's stratosphere have been obtained. A mount containing three crushed “chondritic” IDPs shows features near 1000 and 500 cm?1, suggestive of crystalline pyroxene, and different from those of crystalline olivine, amorphous olivine, or meteoritic clay minerals. The structural diversity of chondritic IDPs and possible effects of atmospheric heating must be considered when comparing this spectrum with astrophysical spectra of interplanetary and cometary dust. Transmission electron microscope (TEM) and infrared observations are also reported on one member of the rare subset of IDPs which resemble hydrated carbonaceous chondrite matrix material. The infrared spectrum of this particle between 4000 and 400 cm?1 closely matches that of the C2 meteorite Murchison. TEM observations suggest that this class of particles might serve as a thermometer for the process of heating on atmospheric entry.  相似文献   

13.
Abstract— We review the petrology of Baszkówka, present new microprobe data on mineral constituents, and propose a model for surface properties of the parent body consistent with these data. The low shock index and high porosity of the Baszkówka L5 chondrite mean that considerable primary textural and petrographic detail is preserved, allowing insight into the structure and evolution of the parent body. This meteorite formed in a sedimentary environment resembling that in which pyroclastic rocks are deposited. The origin of the component chondrules, achondritic fragments (mostly olivine and pyroxene aggregates), chondritic‐achondritic aggregates, and compound chondrules can be explained by invoking collision of 2 melted or partially melted planetesimals, each covered with a thin crust. This could have happened at an early stage in the evolution of the solar system, between 1 and 2 Myr after its origin. The collision resulted in the formation of a cloud containing products of earlier magmatic crystallization (chondrite and achondrite fragments) from which new chondrules were created. Particle collision in this cloud produced fragmented chondrules, chondritic‐achondritic aggregates, and compound chondrules. Within this low‐density medium, these particles were accreted on the surface of the larger of the planetesimals involved in the collision. The density of the medium was low enough to prevent grain‐size sorting of the components but high enough to prevent the total loss of heat and to enable the welding of fragments on the surface of the body. The rock material was homogenized within the cloud and, in particular, within the zone close to the planetesimal surface. The hot material settled on the surface and became welded as molten or plastic metal, and sulfide components cemented the grains together. The process resembled the formation of welded ignimbrites. Once these processes on the planetesimal surface were completed, no subsequent recrystallization occurred. The high porosity of the Baszkówka chondrite indicates that the meteorite comes from a near‐surface part of the parent body. Deeper parts of the planetesimal would have been more massive because of compaction.  相似文献   

14.
A 2‐D numerical study of the evolution of Ceres from a “frozen mudball” to the present era emphasizes the importance of hydrothermal processes. Particulates released as the “frozen mudball” thaws settle to form a roughly 290 km radius core. Hydrothermal flow is driven by radiogenic heating and serpentinization. Both salt‐free and brine fluids are considered. Our modeling suggests that Ceres’s core has been warm over most of its history and is still above freezing, and convective processes are active in core and mantle to the present. The addition of low eutectic solutes greatly expands the region of active convection. A global muddy ocean persists for the first 3 Gyr, and at present, there may be several regional mud seas buried under a frozen crust. Transport of interior material to the near surface occurs throughout our model's history. Eutectic brines drive convective flow to near the surface, even breaching the surface in isolated regions, on the order of 30 km in width, similar in size to some mounds detected using the Dawn visible imaging camera (Sizemore et al. 2015). Surface features such as the bright spot in Occator crater and Ahuna Mons could be the result of eutectic plumes. The CM‐based model density profile is within 10% of Ermakov et al.'s ( 2017 ) results. The model mud mantle has a roughly 42:58 volumetric partitioning of H2O to rock. Our mud model is consistent with the absence of large craters (Marchi et al. 2016 ) and an internal viscosity decreasing with depth (Fu et al. 2017 ).  相似文献   

15.
Ceres’ surface has commonly been linked with carbonaceous chondrites (CCs) by ground‐based telescopic observations, because of its low albedo, flat to red‐sloped spectra in the visible and near‐infrared (VIS/NIR) wavelength region, and the absence of distinct absorption bands, though no currently known meteorites provide complete spectral matches to Ceres. Spatially resolved data of the Dawn Framing Camera (FC) reveal a generally dark surface covered with bright spots exhibiting reflectance values several times higher than Ceres’ background. In this work, we investigated FC data from High Altitude Mapping Orbit (HAMO) and Ceres eXtended Juling (CXJ) orbit (~140 m/pixel) for global spectral variations. We found that the cerean surface mainly differs by spectral slope over the whole FC wavelength region (0.4–1.0 μm). Areas exhibiting slopes ?1 constitute only ~3% of the cerean surface and mainly occur in the bright material in and around young craters, whereas slopes ≥?10% μm?1 occur on more than 90% of the cerean surface; the latter being denoted as Ceres’ background material in this work. FC and Visible and Infrared Spectrometer (VIR) spectra of this background material were compared to the suite of CCs spectrally investigated so far regarding their VIS/NIR region and 2.7 μm absorption, as well as their reflectance at 0.653 μm. This resulted in a good match to heated CI Ivuna (heated to 200–300 °C) and a better match for CM1 meteorites, especially Moapa Valley. This possibly indicates that the alteration of CM2 to CM1 took place on Ceres.  相似文献   

16.
A high-resolution Fourier spectrum (1.7–3.5 μm) and medium-resolution spectrophotometry (2.7–4.2 μm) were obtained for Asteroid 1 Ceres. The presence of the 3-μm absorption feature due to water of hydration was confirmed. The 3-μm feature is compared with the 3-μm bands due to water of hydration in clays and salts. It is concluded that the spectrum of Ceres shows a strong absorption at 2.7–2.8 μm due to structural OH groups in clay minerals. The dominant minerals on the surface of Ceres are therefore hydrated clay minerals structurally similar to terrestrial montmorillonites. There is also a narrow absorption feature at 3.1 μm which is attributable to a very small amount of water ice on Ceres. This is the first evidence for ice on the surface of an asteroid.  相似文献   

17.
Impact crater Dantu not only exhibits a very complex geological history but also shows an exceptional heterogeneity of its surface composition. Because of its location within a low‐lying region named Vendimia Planitia, which has been proposed to represent an ancient impact basin, Dantu possibly offers a window into the composition of Ceres’s deeper crust, which apparently is enriched in ammonia. Local concentration of carbonates within Dantu or its ejecta blanket may be either exposed or their emplacement induced by the Dantu impact event. Because carbonates can be seen along Dantu's crater walls, exposed due to recent slumping, but also as fresh spots or clusters of spots scattered across the surface, the deposition/formation of carbonates took place over a long time period. The association of several bright spots enriched in carbonates with sets of fractures on Dantu's floor might be accidental. Nevertheless, its morphological and compositional similarity to the faculae in Ceres’s prominent impact crater Occator including its hydrated state does not exclude a cryo‐volcanic origin, i.e., upwelling of carbonate‐enriched brines influenced by H2O ice in the subsurface. Indeed, an isolated H2O ice spot can be identified near Dantu, which shows that ice still exists in Ceres’s subsurface at midlatitudes and that it can exist on the surface for a longer period of time.  相似文献   

18.
High-resolution spectroscopic observations of asteroids Ceres and Pallas have been obtained in the 1.0- to 2.6-μm region. Combined with previous spectralmeasurements at other wavelengths, this work presents the broadband spectral reflectances of these asteroids over the 0.4 to 3.6-um region. This extended coverage permits new analyses of the surface mineralogies of these objects. Using laboratory comparison spectra of meteorites and mixtures of terrestrial minerals, the surfaces of Ceres and Pallas are consistent with mixtures of opaques and hydrated silicates, such as are found in types C1 and C2 meteorites. This research emphasizes the importance of the 3-um spectral region for studying by remote methods the relationship of carbonaceous chondrite mineralogies to asteroid surfaces.  相似文献   

19.
The mineralogy and geochemistry of Ceres, as constrained by Dawn's instruments, are broadly consistent with a carbonaceous chondrite (CM/CI) bulk composition. Differences explainable by Ceres’s more advanced alteration include the formation of Mg‐rich serpentine and ammoniated clay; a greater proportion of carbonate and lesser organic matter; amounts of magnetite, sulfide, and carbon that could act as spectral darkening agents; and partial fractionation of water ice and silicates in the interior and regolith. Ceres is not spectrally unique, but is similar to a few other C‐class asteroids, which may also have suffered extensive alteration. All these bodies are among the largest carbonaceous chondrite asteroids, and they orbit in the same part of the Main Belt. Thus, the degree of alteration is apparently related to the size of the body. Although the ammonia now incorporated into clay likely condensed in the outer nebula, we cannot presently determine whether Ceres itself formed in the outer solar system and migrated inward or was assembled within the Main Belt, along with other carbonaceous chondrite bodies.  相似文献   

20.
Based upon our characterization of three separate stones by electron and X‐ray beam analyses, computed X‐ray microtomography, Raman microspectrometry, and visible‐IR spectrometry, Sutter's Mill is a unique regolith breccia consisting mainly of various CM lithologies. Most samples resemble existing available CM2 chondrites, consisting of chondrules and calcium‐aluminum‐rich inclusion (CAI) set within phyllosilicate‐dominated matrix (mainly serpentine), pyrrhotite, pentlandite, tochilinite, and variable amounts of Ca‐Mg‐Fe carbonates. Some lithologies have witnessed sufficient thermal metamorphism to transform phyllosilicates into fine‐grained olivine, tochilinite into troilite, and destroy carbonates. One finely comminuted lithology contains xenolithic materials (enstatite, Fe‐Cr phosphides) suggesting impact of a reduced asteroid (E or M class) onto the main Sutter's Mill parent asteroid, which was probably a C class asteroid. One can use Sutter's Mill to help predict what will be found on the surfaces of C class asteroids such as Ceres and the target asteroids of the OSIRIS‐REx and Hayabusa 2 sample return missions (which will visit predominantly primitive asteroids). C class asteroid regolith may well contain a mixture of hydrated and thermally dehydrated indigenous materials as well as a significant admixture of exogenous material would be essential to the successful interpretation of mineralogical and bulk compositional data.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号