首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Tin-polymetallic greisen-type deposits in the Itu Rapakivi Province and Rondônia Tin Province, Brazil are associated with late-stage rapakivi fluorine-rich peraluminous alkali-feldspar granites. These granites contain topaz and/or muscovite or zinnwaldite and have geochemical characteristics comparable to the low-P sub-type topaz-bearing granites. Stockworks and veins are common in Oriente Novo (Rondônia Tin Province) and Correas (Itu Rapakivi Province) deposits, but in the Santa Bárbara deposit (Rondônia Tin Province) a preserved cupola with associated bed-like greisen is predominant. The contrasting mineralization styles reflect different depths of formation, spatial relationship to tin granites, and different wall rock/fluid proportions. The deposits contain a similar rare-metal suite that includes Sn (±W, ±Ta, ±Nb), and base-metal suite (Zn–Cu–Pb) is present only in Correas deposit. The early fluid inclusions of the Correas and Oriente Novo deposits are (1) low to moderate-salinity (0–19 wt.% NaCl eq.) CO2-bearing aqueous fluids homogenizing at 245–450 °C, and (2) aqueous solutions with low CO2, low to moderate salinity (0–14 wt.% NaCl eq.), which homogenize between 100 and 340 °C. In the Santa Bárbara deposit, the early inclusions are represented by (1) low-salinity (5–12 wt.% NaCl eq.) aqueous fluids with variable CO2 contents, homogenizing at 340 to 390 °C, and (2) low-salinity (0–3 wt.% NaCl eq.) aqueous fluid inclusions, which homogenize at 320–380 °C. Cassiterite, wolframite, columbite–tantalite, scheelite, and sulfide assemblages accompany these fluids. The late fluid in the Oriente Novo and Correas deposit was a low-salinity (0–6 wt.% NaCl eq.) CO2-free aqueous solution, which homogenizes at (100–260 °C) and characterizes the sulfide–fluorite–sericite association in the Correas deposit. The late fluid in the Santa Bárbara deposit has lower salinity (0–3 wt.% NaCl eq.) and characterizes the late-barren-quartz, muscovite and kaolinite veins. Oxygen isotope thermometry coupled with fluid inclusion data suggest hydrothermal activity at 240–450 °C, and 1.0–2.6 kbar fluid pressure at Correas and Oriente Novo. The hydrogen isotope composition of breccia-greisen, stockwork, and vein fluids (δ18Oquartz from 9.9‰ to 10.9‰, δDH2O from 4.13‰ to 6.95‰) is consistent with a fluid that was in equilibrium with granite at temperatures from 450 to 240 °C. In the Santa Bárbara deposit, the inferred temperatures for quartz-pods and bed-like greisens are much higher (570 and 500 °C, respectively), and that for the cassiterite-quartz-veins is 415 °C. The oxygen and hydrogen isotope composition of greisen and quartz-pods fluids (δ18Oqtz-H2O=5.5–6.1‰) indicate that the fluid equilibrated with the albite granite, consistent with a magmatic origin. The values for mica (δ18Omica-H2O=3.3–9.8‰) suggest mixing with meteoric water. Late muscovite veins (δ18Oqtz-H2O=−6.4‰) and late quartz (δ18Omica-H2O=−3.8‰) indicate involvement of a meteoric fluid. Overall, the stable isotope and fluid inclusion data imply three fluid types: (1) an early orthomagmatic fluid, which equilibrated with granite; (2) a mixed orthomagmatic-meteoric fluid; and (3) a late hydrothermal meteoric fluid. The first two were responsible for cassiterite, wolframite, and minor columbite–tantalite precipitation. Change in the redox conditions related to mixing of magmatic and meteoric fluids favored important sulfide mineralization in the Correas deposit.  相似文献   

2.
The carbonate-hosted Kabwe Pb–Zn deposit, Central Zambia, has produced at least 2.6 Mt of Zn and Pb metal as well as minor amounts of V, Cd, Ag and Cu. The deposit consists of four main epigenetic, pipe-like orebodies, structurally controlled along NE–SW faults. Sphalerite, galena, pyrite, minor chalcopyrite, and accessory Ge-sulphides of briartite and renierite constitute the primary ore mineral assemblage. Cores of massive sulphide orebodies are surrounded by oxide zones of silicate ore (willemite) and mineralized jasperoid that consists largely of quartz, willemite, cerussite, smithsonite, goethite and hematite, as well as numerous other secondary minerals, including vanadates, phosphates and carbonates of Zn, Pb, V and Cu.Galena, sphalerite and pyrite from the Pb–Zn rich massive orebodies have homogeneous, negative sulphur isotope ratios with mean δ34SCDT permil (‰) values of − 17.75 ± 0.28 (1σ), − 16.54 ± 0.0.27 and − 15.82 ± 0.25, respectively. The Zn-rich and Pb-poor No. 2 orebody shows slightly heavier ratios of − 11.70 ± 0.5‰ δ34S for sphalerite and of − 11.91 ± 0.71‰ δ34S for pyrite. The negative sulphur isotope ratios are considered to be typical of sedimentary sulphides produced through bacterial reduction of seawater sulphate and suggest a sedimentary source for the sulphur.Carbon and oxygen isotope ratios of the host dolomite have mean δ13CPDB and δ18OSMOW values of 2.89‰ and 27.68‰, respectively, which are typical of marine carbonates. The oxygen isotope ratios of dolomite correlate negatively to the SiO2 content introduced during silicification of the host dolomite. The depletion in 18O in dolomite indicates high temperature fluid/rock interaction, involving a silica- and 18O-rich hydrothermal solution.Two types of secondary fluid inclusions in dolomite, both of which are thought to be related to ore deposition, indicate temperatures of ore deposition in the range of 257 to 385 and 98 to 178 °C, respectively. The high temperature fluid inclusions contain liquid + vapour + solid phases and have salinities of 15 to 31 eq. wt.% NaCl, whereas the low temperature inclusions consist of liquid + vapour with a salinity of 11.5 eq. wt.% NaCl.Fluid transport may have been caused by tectonic movements associated with the early stages of the Pan-African Lufilian orogeny, whereas ore deposition within favourable structures occurred due to changes in pressure, temperature and pH in the ore solution during metasomatic replacement of the host dolomite. The termination of the Kabwe orebodies at the Mine Club fault zone and observed deformation textures of the ore sulphides as well as analysis of joint structures in the host dolomite, indicate that ore emplacement occurred prior to the latest deformation phase of the Neoproterozoic Lufilian orogeny.  相似文献   

3.
The Cobre–Babilonia vein system formed during a single major hydrothermal stage and is part of the Taxco district in Guerrero, southern Mexico. Homogenization and ice melting temperatures range from 160 to 290 °C and from − 11.6 to − 0.5 °C, respectively. We determined an approximate thermal gradient of 17 to 20 °C per 100 m using fluid inclusions. A thermal peak marked by the 290 °C isotherm is interpreted as a major feeder channel to the veins. The highest content of Zn + Pb in ore coincides with the 220 and 240 °C isotherms. Salinities of mineralizing fluids range from 0.8 to 15.6 wt.% NaCl equiv, and are distributed in two populations that can be related with barren or ore-bearing vein sections, with 0.8 to 6 wt.% NaCl equiv and 7 to 15.6 wt.% NaCl equiv, respectively. δ13C and δ18O water values from calcite from the Cobre–Babilonia vein system and the Esperanza Vieja and Guadalupe mantos range − 5.4‰ to − 10.4‰ and 9.9‰ to 13.4‰, respectively. δ34S values range from 0‰ to 3.2‰ and − 0.7‰ to − 4.3‰ in sphalerite, − 4‰ to 0.9‰ in pyrite, and − 1.4‰ to − 5.5‰ in galena. Both fluid inclusion and stable isotope data are compatible with magmatic and meteoric sources for mineralizing fluids. Also, sulfur isotope compositions suggest both magmatic and sedimentary sources for sulfur.  相似文献   

4.
The calcite cement in the Lower Ordovician Majiagou Formation in the Ordos basin in northern China can be subdivided into three groups based on preliminary results of oxygen and carbon isotopes and fluid inclusion microthermometry. Group 1 has low oxygen isotopes (− 14‰ to − 18‰), low Th values (92–103 °C), and low salinities (1.7–4.9 wt.% NaCl equivalent) and is interpreted to have precipitated during early burial from porewater influenced by meteoric water. Group 2 has much higher oxygen isotope values (− 5‰ to − 8‰), which, coupled with the higher Th values (136–151 °C), suggest that the calcite was precipitated from fluids that were significantly enriched in 18O, possibly resulting from fluid–rock reaction during burial. Group 3 occurring along fractures is characterized by high salinities (21–28 wt.% NaCl equivalent) and is interpreted to have been precipitated from locally preserved residual evaporitic brines. The occurrence of primary hydrocarbon inclusions and its low carbon isotopes (− 11‰ to − 15‰) suggest that precipitation of group 3 calcite took place in the presence of hydrocarbons.  相似文献   

5.
The Changkeng Au and Fuwang Ag deposits represent an economically significant and distinct member of the Au–Ag deposit association in China. The two deposits are immediately adjacent, but the Au and Ag orebodies separated from each other. Ores in the Au deposit, located at the upper stratigraphic section and in the southern parts of the orefield, contain low Ag contents (< 11 ppm); the Ag orebodies, in the lower stratigraphic section, are Au-poor (< 0.2 ppm). Changkeng is hosted in brecciated cherts and jasperoidal quartz and is characterized by disseminated ore minerals. Fuwang, hosted in the Lower Carboniferous Zimenqiao group bioclastic limestone, has vein and veinlet mineralization associated with alteration comprised of quartz, carbonate, sericite, and sulfides. Homogenization temperatures of fluid inclusions from quartz veinlets in the Changkeng and Fuwang deposits are in the range of 210 ± 80 °C and 230 ± 50 °C, respectively. Salinities of fluid inclusions from the two deposits range from 1.6 to 7.3 wt.% and 1.6 to 2.6 wt.% equiv. NaCl, respectively. The δDH2O, δ18OH2O, δ13CCO2 and 3He/4He values of the fluid inclusions from the Changkeng deposit range from − 80‰ to − 30‰, − 7.8‰ to − 3.0‰, − 16.6‰ to − 17.0‰ and 0.0100 to 0.0054 Ra, respectively. The δDH2O, δ18OH2O, δ13CCO2 and 3He/4He values of fluid inclusions from the Fuwang deposit range from − 59‰ to − 45‰, − 0.9‰ to 4.1‰, − 6.7‰ to − 0.6‰ and 0.5930 to 0.8357 Ra, respectively. The δDH2O, δ18OH2O, δ13CCO2 and 3He/4He values of the fluid inclusions suggest the ore fluids of the Changkeng Au-ore come from the meteoric water and the ore fluids of the Fuwang Ag-ore are derived from mixing of magmatic water and meteoric water. The two deposits also show different Pb-isotopic signatures. The Changkeng deposit has Pb isotope ratios (206Pb/204Pb: 18.580 to 19.251, 207Pb/204Pb: 15.672 to 15.801, 208Pb/204Pb: 38.700 to 39.104) similar to those (206Pb/204Pb: 18.578 to 19.433, 207Pb/204Pb: 15.640 to 15.775, 208Pb/204Pb: 38.925 to 39.920) of its host rocks and different from those (206Pb/204Pb: 18.820 to 18.891, 207Pb/204Pb: 15.848 to 15.914, 208Pb/204Pb: 39.579 to 39.786) of the Fuwang deposit. The different signatures indicate different sources of ore-forming material. Rb–Sr isochron age (68 ± 6 Ma) and 40Ar–39Ar age (64.3 ± 0.1 Ma) of the ore-related quartz veins from the Ag deposit indicate that the Fuwang deposit formed during the Cenozoic Himalayan tectonomagmatic event. Crosscutting relationships suggests that Au-ore predates Ag-ore. The adjacent Changkeng and Fuwang deposits could, however, represent a single evolved hydrothermal system. The ore fluids initially deposited Au in the brecciated siliceous rocks, and then mixing with the magmatic water resulted in Ag deposition within fracture zones in the limestone. The deposits are alternatively the product of the superposition of two different geological events. Age evidence for the Fuwang deposit, together with the Xiqiaoshan Tertiary volcanic-hosted Ag deposit in the same area, indicates that the Pacific Coastal Volcanic Belt in the South China Fold Belt has greater potential for Himalayan precious metal mineralization than previous realized.  相似文献   

6.
Fluid inclusion data are presented for the successive stages of limestone, dolomite, magnesite and sulphide-bearing quartz veins in Proterozoic carbonate rocks of the Lesser Himalaya. Subsurface fluids were H2O–NaCl–KCl ± MgCl2 ± CaCl2 and showed successive increase in salinity and temperature. The salinity of the pore fluid during limestone diagenesis was in the range of 7.5–15 eq wt.% NaCl and the magnesite-forming fluids had a salinity of about 9 to 19 eq wt.% NaCl. This progressive rise in salinity is attributed to a more saline fluid in the deeper zones. The inverse relation between homogenization temperatures and final melting temperatures suggests mixing of the fluids during diagenesis, and highly depleted δ18O values rule out participation of magmatic fluid in the mixing. A late stage carbonic fluid is linked with talc formation. The low temperature of sulphide-forming epigenetic solutions, as obtained from fluid inclusions, is also substantiated by the chemical data from these sulphides. δ34S values in galena infer that magmatic sulphur was probably not involved, and the sulphur of the galena is derived from an isotopically heavy source.  相似文献   

7.
A Middle Tertiary volcanic belt in the High Andes of north-central Chile hosts numerous precious- and base-metal epithermal deposits over its 150 km north-south trend. The El Indio district, believed to be associated with a hydrothermal system in the late stages of development of a volcanic caldera, consists of a series of separate vein systems located in an area of 30 km2 which has undergone intense argillic-sericitic-solfataric alteration. The majority of the known gold-copper-silver mineralization occurs within a structural block only 150 by 500 m in surface area, with a recognized vertical extent exceeding 300 m. This block is bounded by two high-angle northeast-trending faults oriented subparallel to the mineralized veins.Hypogene mineralization at El Indio is grouped into two main ore-forming stages: Copper and Gold. The Copper stage is composed chiefly of enargite and pyrite forming massive veins up to 20 m wide, and is accompanied by alteration of the wall rocks to alunite, kaolinite, sericite, pyrite and quartz. The Gold stage consists of vein-filling quartz, pyrite, native gold, tennantite and subordinate amounts of a wide variety of telluride minerals. Associated with this stage is pervasive alteration of the wall rocks to sericite, kaolinite, quartz and minor pyrophyllite. The transition from copper to gold mineralization is marked by the alteration of enargite to tennantite and by minor deposition of sphalerite, galena, huebnerite, chalcopyrite and gold. Mineral stability relations indicate that there was a general decrease in the activity of S2 accompanied by variations in the activity of Te2 during the Gold stage.Fluid-inclusion data show homogenization temperatures ranging from about 220 to 280°C, with salinities on the order of 3–4 eq. wt. % NaCl for the Copper stage. The Gold-stage inclusions indicate a similar range in homogenization temperatures, but significantly lower salinities (0.1–1.4 eq. wt. % NaCl). Fluid inclusions of transition minerals show a weak inverse relationship between homogenization temperatures (190–250°C) and salinities (3.4–1.4 eq. wt. % NaCl), which may represent mixing of hotter Gold-stage fluids with cooler late-Copper-stage fluids. No evidence of boiling was found in fluid inclusions, but CO2 vapor-rich inclusions were identified in wall-rock quartz phenocrysts which pre-date copper and gold mineralization.Mineral stability calculations indicate that given a fairly restricted range of solution compositions, the Copper-, Transition- and Gold-stage minerals at El Indio could have been deposited from a single solution, with constant total dissolved sulfur which underwent reduction through time. Limited sulfur-isotope data indicates that pyrite from the Copper stage was not in isotopic equilibrium with Copper-stage alunite or Transition-stage sphalerite. The sulfur-isotope and fluid-inclusion data indicate that two fluids with comparable temperatures but different compositions flowed through the El Indio system. The earlier fluid deposited copper attended by sericite-alunite-kaolinite alteration, and later epithermal fluids deposited gold with quartz-sericite-kaolinite-pyrite alteration.  相似文献   

8.
The Daenam mine, which produced over 9250 tons of iron oxide ore from 1958 to 1962, is situated in the Early Cretaceous Yeongyang subbasin of the Gyeongsang basin. It consists of two lens-shaped, hematite-bearing quartz veins that occur along faults in Cretaceous leucocratic granite. The hematite-bearing quartz veins are mainly composed of massive and euhedral quartz and hematite with minor amounts of pyrite, pyrrhotite, mica, feldspar and chlorite.Fluid inclusions in quartz can be divided into three main types: CO2-rich, CO2–H2O, and H2O-rich. Hydrothermal fluids related to the formation of hematite are composed of either H2O–CO2–NaCl ± CH4 (homogenization temperature: 262–455 °C, salinity <7 eq. wt.% NaCl) or H2O–NaCl (homogenization temperature: 182–266 °C, and salinity <5.1 eq. wt.% NaCl), both of which evolved by mixing with deeply circulating meteoric water. Hematite from the quartz veins in the Daenam mine was mainly deposited by unmixing of H2O–CO2–NaCl ± CH4 fluids with loss of the CO2 + CH4 vapor phase and mixing with downward percolating meteoric water providing oxidizing conditions.  相似文献   

9.
The Gemericum is a segment of the Variscan orogen subsequently deformed by the Alpine–Carpathian orogeny. The unit contains abundant siderite–sulphide and quartz–antimony veins together with stratabound siderite replacement deposits in limestones and stratiform sulphide mineralization in volcano-sedimentary sequences. The siderite–sulphide veins and siderite replacement deposits of the Gemericum represent one of the largest accumulations of siderite in the world, with about 160 million tonnes of mineable FeCO3. More than 1200 steeply dipping hydrothermal veins are arranged in a regional tectonic and compositional pattern, reflecting the distribution of regional metamorphic zones. Siderite–sulphide veins are typically contained in low-grade (chlorite zone) sedimentary, volcano-sedimentary or volcanic Lower and Upper Paleozoic rocks. Quartz–antimony veins are hosted by higher-grade units (biotite zone). Siderite–sulphide veins are dominated by early siderite followed by a complex set of stages, including quartz–sulphide (chalcopyrite, tetrahedrite), barite, tourmaline–quartz, and sulphide-remobilization stages. The temporal evolution of these stages is difficult to study because of the widespread and repeated tectonic processes, within-vein replacement and recrystallization. Siderite–sulphide veins show considerable vertical (up to 1200 m) and lateral (up to 15 km) extent, and a thickness typically reaching several metres. Carbonate-replacement siderite deposits of the Gemericum are hosted by a Silurian limestone belt and are similar to stratabound siderite deposits of the Eastern Alps (e.g., Erzberg, Austria).Based on a review of geological, petrological and geochronological data for the Gemericum, and extensive stable and radiogenic isotope data and fluid inclusion data on hydrothermal minerals, the siderite–sulphide veins and siderite replacement deposits are classified as metamorphogenic in a broad sense. The deposits were formed during several stages of regional crustal-scale fluid flow. Isotope (S, C, Sr, Pb) fingerprinting identifies the metamorphosed rock complexes of the Gemericum as a source of most components of hydrothermal fluids. Fluid inclusion and stable isotope data evidence the participation of several contrasting fluid types, and the existence of contrasting P–T conditions during vein evolution. A high-δ18O, medium- to high-salinity, H2O-type fluid is the most important component during siderite deposition, whereas H2O–CO2-type fluid inclusion containing dense liquid CO2 and corresponding to minimal pressures between 1 and 3 kbar were found in a younger tourmaline–quartz stage. Younger quartz–ankerite(±siderite)–sulphide stages are characterized by high-salinity (17 to 35 wt.% NaCl equivalent) and low-temperature (Th=90 to 180 °C) H2O-type fluids.The vein deposits are interpreted as a result of multistage hydrothermal circulation, with Variscan and Alpine mineralization phases. Based on available indirect data, the most important mineralization phase was related to regional fluid flow during the uplift of a Variscan metamorphic core complex, producing siderite–sulphide (±barite) mineralization, while tourmaline–quartz stage and sulphide remobilization stages are related to Alpine processes. Two phases of vein evolution are evident from two groups of 87Sr/86Sr isotope ratios of Sr-rich, Rb-poor hydrothermal minerals: 0.71042–0.71541 in older barite and 0.7190–0.7220 in late-stage celestine and strontianite.  相似文献   

10.
This investigation presents and interprets fluid inclusion data from different lithological units of the Cu skarn deposits at Mazraeh, north of Ahar, Azarbaijan, NW Iran. The results provide an assessment of the P–T conditions and mineral–fluid evolution and suggest new exploration parameters. Five types of inclusions are recognized from quartz and garnet. The temperature of homogenization of Type I inclusions with daughter minerals halite and sylvite ranges from 312° to 470 °C with total salinity of 52 to 63 wt.% NaCl equiv.; Type II and III inclusions with halite have homogenization temperatures of 230° to 520 °C and salinity of 31 to 50 wt.% NaCl equiv. The salinity of Types IV and V biphase (liquid + vapor) inclusions, based on their final ice melting temperature, varies between 10.2 to 20.8 wt.% NaCl equiv. Th vs. salinity plots of inclusions show that the salinity of the fluids correlates positively with temperature. The inclusions formed at low pressure. Changes in the temperature and salinity of the fluids can be reconstructed from the inclusions. Highly saline, high-temperature fluids were most abundant during the main chalcopyrite ore-forming phase in the skarn and mineralized quartz veins. Low-salinity aqueous fluids were abundant in barren veins, in which there is no evidence for early hot high-salinity brine, and might have resulted from late-stage dilution and mixing of hydrothermal fluids with meteoric water. Based on petrographic features and fluid-inclusion data, early-stage magnetite deposition is related to boiling of fluid at temperatures of about 500 °C. At a later stage, boiling at temperatures of around 320° to 400 °C favored the deposition of sulfides and Fe mobility was decreased at these lower temperatures. The following inclusion characteristics may be used as exploration parameters in the Mazraeh area. (i) Presence of high-temperature, salt-bearing inclusions, with Th between 300 and 500 °C; (ii) High-salinity fluid inclusions; and (iii) Inclusions showing evidence of boiling of the fluid. In addition, the presence of magnetite is an important exploration parameter.  相似文献   

11.
The El Valle-Boinás copper–gold deposit is located in the southern part of the Rio Narcea Gold Belt 65 km west of Oviedo (NW Spain), within the Cantabrian Zone (Iberian Hercynian Massif). The deposit is related to the Boinás stock, which ranges from quartz-monzonite to monzogranite and intruded (303 Ma) the carbonated Láncara Formation (early Cambrian) and the siliciclastic Oville Formation (middle-late Cambrian).A copper–gold skarn was developed along the contact between the igneous rock and the carbonated sedimentary rocks. The skarn distribution and mineralogy reflects both structural and lithologic controls. Two types of skarn exists: a calcic skarn mainly developed in the upper calcic member of the Láncara Formation, and a magnesian skarn developed in the lower dolomitic and organic-rich member. The former mainly consists of garnet, pyroxene and wollastonite. Retrograde alteration consists of K-feldspar, epidote, quartz, calcite, magnetite, ferroactinolite, titanite, apatite, chlorite and sulfides. Magnesian skarn mainly consists of diopside with interbedded forsterite zones. Pyroxene skarn is mainly altered to tremolite, with minor phlogopite and serpentine. Olivine skarn is pervasively altered to serpentine and magnetite, and is commonly accompanied by high sulfide and gold concentrations. This altered skarn results in a very dark rock, referred to as “black skarn”, which has great importance in gold reserves. Sulfide mineralization mainly consists of chalcopyrite, bornite, arsenopyrite, pyrrhotite and pyrite, while wittichenite, sphalerite, digenite, bismuthinite, native bismuth and electrum occur as accessory minerals.After extensive erosion, reactivation of the northeast-trending fracture zone provided conduits for the subsequent emplacement of porphyritic dikes (285±4 Ma) and diabasic dikes (255±5 Ma). Alteration, characterized by sericitization, silicification, carbonatization and hypogene oxidation took place, as did sulfide mineralization (pyrite, arsenopyrite, sphalerite, chalcopyrite, galena, bournonite, and Fe–Pb–Sb sulfosalts). Veins with quartz, carbonate, adularia and sulfide minerals crosscut all previous lithologies. Jasper and jasperoid breccias developed at the upper parts of the deposits.The fluid inclusion and stable isotope studies suggest a predominantly magmatic prograde-skarn fluid characterized by high-salinity (26–28 wt.% KCl and 32–36 wt.% NaCl) and high temperature, above 580°C. This fluid evolved into two immiscible fluids: a CO2- and/or CH4-rich, high-salinity aqueous fluid. Temperatures for the first retrograde-stage are between 350 and 425°C. A second stage is related to a more diluted aqueous fluid (3–6.2 wt.% NaCl eq.) and temperatures from 280 to 325°C. The fluid inclusion study performed on quartz from low-temperature mineralization indicates a very low salinity (0.2–6.2 wt.% NaCl eq.), low-temperature aqueous fluid (from 150 to 250°C), and trapping pressure conditions less than 0.2 kbar. In addition, the stable isotope study suggests that an influx of metamorphic waters derived from the country rocks produced these lower temperature fluids. The last control for the Au mineralization is the Alpine tectonism, which developed fault breccias (cataclasites to, locally, protomylonites) and gold remobilization from previous mineralization.  相似文献   

12.
The Pingüino deposit, located in the low sulfidation epithermal metallogenetical province of the Deseado Massif, Patagonia, Argentina, represents a distinct deposit type in the region. It evolved through two different mineralization events: an early In-bearing polymetallic event that introduced In, Zn, Pb, Ag, Cd, Au, As, Cu, Sn, W and Bi represented by complex sulfide mineralogy, and a late Ag–Au quartz-rich vein type that crosscut and overprints the early polymetallic mineralization. The indium-bearing polymetallic mineralization developed in three stages: an early Cu–Au–In–As–Sn–W–Bi stage (Ps1), a Zn–Pb–Ag–In–Cd–Sb stage (Ps2) and a late Zn–In–Cd (Ps3). Indium concentrations in the polymetallic veins show a wide range (3.4 to 1,184 ppm In). The highest indium values (up to 1,184 ppm) relate to the Ps2 mineralization stage, and are associated with Fe-rich sphalerites, although significant In enrichment (up to 159 ppm) is also present in the Ps1 paragenesis associated with Sn-minerals (ferrokesterite and cassiterite). The hydrothermal alteration associated with the polymetallic mineralization is characterized by advanced argillic alteration within the immediate vein zone, and sericitic alteration enveloping the vein zone. Fluid inclusion studies indicate homogenisation temperatures of 308.2–327°C for Ps1 and 255–312.4°C for Ps2, and low to moderate salinities (2 to 5 eq.wt.% NaCl and 4 to 9 eq.wt.% NaCl, respectively). δ34S values of sulfide minerals (+0.76‰ to +3.61‰) indicate a possible magmatic source for the sulfur in the polymetallic mineralization while Pb isotope ratios for the sulfides and magmatic rocks (206Pb/204Pb, 207Pb/204Pb and 208Pb/204Pb ratios of 17.379 to 18.502; 15.588 to 15.730 and 38.234 to 38.756, respectively) are consistent with the possibility that the Pb reservoirs for both had the same crustal source. Spatial relationships, hydrothermal alteration styles, S and Pb isotopic data suggest a probable genetic relation between the polymetallic mineralization and dioritic intrusions that could have been the source of metals and hydrothermal fluids. Mineralization paragenesis, alteration mineralogy, geochemical signatures, fluid inclusion data and isotopic data, confirm that the In-bearing polymetallic mineralization from Pingüino deposit is a distinct type, in comparison with the well-known epithermal low sulfidation mineralization from the Deseado Massif.  相似文献   

13.
The Wittichen Co–Ag–Bi–U mining area (Schwarzwald ore district, SW Germany) hosts several unconformity-related vein-type mineralizations within Variscan leucogranite and Permian to Triassic redbeds. The multistage mineralization formed at the intersection of two fault systems in the last 250 Ma. A Permo-Triassic ore stage I with minor U–Bi–quartz–fluorite mineralization is followed by a Jurassic to Cretaceous ore stage II with the main Ag and Co mineralization consisting of several generations of gangue minerals that host the sub-stages of U–Bi, Bi–Ag, Ni–As–Bi and Co–As–Bi. Important ore minerals are native elements, Co and Ni arsenides, and pitchblende; sulphides are absent. The Miocene ore stage III comprises barite with the Cu–Bi sulfosalts emplectite, wittichenite and aikinite, and the sulphides anilite and djurleite besides native Bi, chalcopyrite, sphalerite, galena and tennantite. The mineral-forming fluid system changed from low salinity (<5 wt.% NaCl) at high temperature (around 300°C) in Permian to highly saline (around 25 wt.% NaCl + CaCl2) at lower temperatures (50–150°C) in Triassic to Cretaceous times. Thermodynamic calculations and comparison with similar mineralizations worldwide show that the Mesozoic ore-forming fluid was alkaline with redox conditions above the hematite–magnetite buffer. We suggest that the precipitation mechanism for native elements, pitchblende and arsenides is a decrease in pH during fluid mixing processes. REE patterns in fluorite and the occurrence of Bi in all stages suggest a granitic source of some ore-forming elements, whereas, e.g. Ag, Co and Ni probably have been leached from the redbeds. The greater importance of Cu and isotope data indicates that the Miocene ore stage III is more influenced by fluids from the overlying redbeds and limestones than the earlier mineralization stages.  相似文献   

14.
The 1.27 Ga old Ivigtut (Ivittuut) intrusion in South Greenland is world-famous for its hydrothermal cryolite deposit [Na3AlF6] situated within a strongly metasomatised A-type granite stock. This detailed fluid inclusion study characterises the fluid present during the formation of the cryolite deposit and thermodynamic modelling allows to constrain its formation conditions.Microthermometry revealed three different types of inclusions: (1) pure CO2, (2) aqueous-carbonic and (3) saline-aqueous inclusions. Melting temperatures range between − 23 and − 15 °C for type 2 and from − 15 to − 10 °C for type 3 inclusions. Most inclusions homogenise between 110 and 150 °C into the liquid.Stable isotope compositions of CO2 and H2O were measured from crushed inclusions in quartz, cryolite, fluorite and siderite. The δ13C values of about − 5‰ PDB are typical of mantle-derived magmas. The differences between δ18O of CO2 (+ 21 to + 42‰ VSMOW) and δ18O of H2O (− 1 to − 21.7‰ VSMOW) suggest low-temperature isotope exchange. δD (H2O) ranges from − 19 to − 144‰ VSMOW. The isotopic composition of inclusion water closely follows the meteoric water line and is comparable to Canadian Shield brines. Ion chromatography revealed the fluid's predominance in Na, Cl and F. Cl/Br ratios range between 56 and 110 and may imply intensive fluid–rock interaction with the host granite.Isochores deduced from microthermometry in conjunction with estimates for the solidification of the Ivigtut granite suggest a formation pressure of approximately 1–1.5 kbar for the fluid inclusions. Formation temperatures of different types of fluid inclusions vary between 100 and 400 °C. Thermodynamic modelling of phase assemblages and the extraordinary high concentration in F (and Na) may indicate that the cryolite body and its associated fluid inclusions could have formed during the continuous transition from a volatile-rich melt to a solute-rich fluid.  相似文献   

15.
The Shanggong Au deposit in the Xiong’er Terrane, East Qinling, China, has resources of about 30 ton Au, making it one of the largest orogenic-mesothermal Au deposits hosted in volcanic rocks of the Mesoproterozoic Xiong’er Group. Three stages of hydrothermal activity are recognized (early, middle and late), of which two (early and middle) were ore producing and characterized by quartz–pyrite and polymetallic sulfides, respectively. The third and late stage is represented by a carbonate–quartz assemblage. Hydrogen, oxygen and carbon isotope systematics of the Shanggong deposit from a previous work suggest that the early stage fluids were derived from magmatic and/or metamorphic devolatilization of sedimentary rocks at depth. This is supported by new C, S and published Sr and Pb isotopic data, presented in this paper. These new data, δ13C values ranging from 1.5 ‰ for early stage ankerite to −2.2 ‰ for late stage ankerite, negative δ34S values for sulfides from the middle stage (–19.2 to –6.3 ‰), suggest a contribution from organic matter and that the ore fluid evolved from deeply sourced to shallowly sourced, with those of the middle stage representing a mixture of these two fluid systems. The comparison of the hydrogen–oxygen–carbon–sulfur–lead–strontium isotope systematics between the Shanggong deposit and the main lithologies in the Xiong’er Terrane, shows that neither these nor the underlying lower crust and mantle, or combinations thereof, could be considered as the source of ore fluids for the Shanggong Au deposit. A likely source was a carbonaceous carbonate, sandstone, shale, chert sequence in the underthrusted Guandaokou and Luanchuan Groups, exposed south of the Xiong’er Terrane.Ar–Ar and Rb–Sr isochron ages for mineral phases of the early, middle and late stages, together with geological field data, constrain the timing of the hydrothermal activity and Au metallogenesis at 242 ± 10, 167 ± 7 and 112 ± 7 Ma, respectively. This metallogenesis and associated granitic magmatism, can be related to the continental collision between the Yangtze and North China Cratons that resulted in the formation of the Qinling Orogen, led to the different hydrothermal systems that were responsible for the three stages that formed the Shanggong Au deposit, over a period of about 130 Myrs.  相似文献   

16.
The Qaleh-Zari copper deposit, located in South Khorasan in the Central Lut region of Iran, is a polymetallic vein deposit with major amounts of Cu, Au, Ag and minor amounts of Pb, Zn and Bi. Mineralization occurs in a series of NW–SE trending fault planes and breccia zones in Paleogene andesitic to basaltic volcanic rocks. Argillization, sericitization and propylitization characterize alteration halos bordering mineral veins. The main ore minerals are chalcopyrite, pyrite, galena and sphalerite, with quartz, calcite and minor chlorite as the main gangue phases. Microthermometric measurements of fluid inclusions in cogenetic quartz indicate homogenization temperatures between 160 and 300 °C and salinities from 1 to 4 wt% NaCl equiv. Boiling occurred in the mineralising fluids at 160–1000 m below the paleo-water table at pressures of approximately 15−80 bar at various stages in the formation of the ore body. The wide range of pressures and temperatures reflects the multi-stage nature of the mineralization at Qaleh-Zari. The δ18O values in quartz (relative to SMOW) and δ34S values in chalcopyrite and galena (relative to CDT) range from 6.5 to 7.5‰ and 0.0–1.5‰ (mean: 7.0‰), respectively. At 300 °C, calculated fluid δ18O values are close to 0‰. These data suggest a magmatic origin for sulfur and a surficial origin for the mineralizing fluid. Mineralization at Qaleh-Zari is interpreted as epithermal and low-sulfidation in style and was probably related to a deep-seated magmatic system. Ore deposition was the result of boiling, cooling and pressure reduction.  相似文献   

17.
Fluid inclusions and clay mineralogy of the Permo-Triassic rocks from the Espina and Espadà Ranges (SE Iberian Chain, Spain) have been investigated to establish their relationship with hydrothermal fluid circulation during the Alpine Orogeny. Primary fluid inclusions in quartz-filled tension gashes in Permo-Triassic sandstones reveal maximum temperatures around 230 °C and very constant salinities of 8.5% wt. eq. NaCl. Secondary fluid inclusions found in quartz from the Santonian Ba–Cu–Hg deposits show similar compositional and thermodynamic characteristics, denoting an Alpine recrystallization. Clay mineral composition of Permo-Triassic mudrocks is characterized by pyrophyillite, indicating low-grade metamorphic conditions. Field observations and experimental data suggest that the crystallization of quartz in tension gashes, the formation of secondary fluid inclusions and the development of the metamorphism are contemporaneous and related to fluid circulation during the Alpine compression. Fluid flow took place along the Hercynian fault system that was reactivated during the Mesozoic rift stage and inverted during the Alpine deformation.  相似文献   

18.
Stable (δ13C and δ18O) and radiogenic 87Sr/86Sr isotopic data have been used to investigate the origin of cleat dawsonite (NaAlCO3(OH)2) in the Late Permian Wittingham Coal Measures of the Upper Hunter region in the Sydney Basin, New South Wales. The δ13CPDB values have a narrow range (− 1.7‰ to + 2.4‰), with an average of + 0.3‰, suggesting a magmatic source for the carbon. In contrast, δ18OSMOW values have a wide range (+ 13.6‰ to + 19.8‰), and decrease systematically with decreasing distance from a major intrusion. This systematic variation reflects establishment of localised hydrothermal cells. Water–rock interaction between fluids associated with these hydrothermal cells, and Rb-poor volcaniclastic detritus in the coal measures, produced mantle-like 87Sr/86Sr (0.705032 to 0.706464) in the dawsonite.  相似文献   

19.
The Petrova and Trgovska Gora Mts. (Gora=Mountain) are Variscan basement units incorporated into the northwestern Dinarides during the Alpine orogeny. They host numerous siderite-quartz-polysulphide, siderite-chalcopyrite, siderite-galena and barite veins, as well as stratabound hydrothermal-replacement ankerite bodies within carbonates in non-metamorphosed, flysch-like Permo-Carboniferous sequences. The deposits have been mined for Cu, Pb, Ag and Fe ores since Medieval times. Fluid inclusion studies of quartz from siderite-polysulphide-quartz and barite veins of both regions have shown the presence of primary aqueous NaCl?CaCl2±MgCl2?H2O±CO2 inclusions. The quartz-sulphide stage of both regions show variable salinities; 2.7–26.2 wt% NaCl eq. for the Trgovska Gora region and 3.4–23.4 wt% NaCl eq. for the Petrova gora region, and similar homogenisation temperatures (100–230°C). Finally, barite is precipitated from low salinity-low temperature solutions (3.7–15.8 wt % NaCl equ. and 115–145°C). P-t conditions estimated via isochore construction yield formation temperatures between 180–250°C for the quartz-sulphide stage and 160–180°C for the barite stage, using a maximum lithostatic pressure of 1 kbar (cc. 3 km of overburden). The sulphur isotope composition of barite from both deposits indicates the involvement of Permian seawater in ore fluids. This is supported by the elevated bromium content of the fluid inclusion leachates (120–660 ppm in quartz, 420–960 ppm in barite) with respect to the seawater, indicating evaporated seawater as the major portion of the ore-forming fluids. Variable sulphur isotope compositions of galena, pyrite and chalcopyrite, between ?3.2 and +2.7‰, are interpreted as a product of incomplete thermal reduction of the Permian marine sulphate mixed with organically- and pyrite-bound sulphur from the host sedimentary rocks. Ore-forming fluids are interpreted as deep-circulating fluids derived primarily from evaporated Permian seawater and later modified by interaction with the Variscan basement rocks. 40Ar/39Ar data of the detrital mica from the host rocks yielded the Variscan age overprinted by an Early Permian tectonothermal event dated at 266–274 Ma. These ages are interpreted as those reflecting hydrothermal activity correlated with an incipient intracontinental rifting in the Tethyan domain. Nevertheless, 75 Ma recorded at a fine-grained sericite sample from the alteration zone is interpreted as a result of later resetting of white mica during Campanian opening/closure of the Sava back arc in the neighbouring Sava suture zone (Ustaszewski et al. 2008).  相似文献   

20.
The Zn–Pb–Cu ore deposit of Rammelsberg is characterized by a complex fluid flow history. The main phase of ore deposition occurred during the Middle Devonian in the Rhenohercynian basin. The Kniest zone underlying the stratiform ore is interpreted as the feeder zone, along which hydrothermal fluids migrated upward and were expelled on the sea floor. Mineralizing brines possibly had a minimum temperature of 130°C, and salinity ranged between 4.9 and 10.3 eq. wt.% NaCl. The ore and its host rock became folded during the Variscan orogeny, and low salinity fluids (1.0 to 2.3 eq. wt.% NaCl) were mobilized during this tectonic period. Remobilization of the ore took place during the Mesozoic by a high salinity (17.3 to 20.2 eq. wt.% NaCl) H2O–NaCl–CaCl2 fluid.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号