共查询到20条相似文献，搜索用时 328 毫秒
1.
The large, newly discovered Sharang porphyry Mo deposit and nearby Yaguila skarn Pb–Zn–Ag (–Mo) deposit reside in the central Lhasa terrane, northern Gangdese metallogenic belt, Tibet. Multiple mineral chronometers (zircon U–Pb, sericite 40Ar–39Ar, and zircon and apatite (U–Th)/He) reveal that ore-forming porphyritic intrusions experienced rapid cooling (> 100 °C/Ma) during a monotonic magmatic–hydrothermal evolution. The magmatic–hydrothermal ore-forming event at Sharang lasted ~ 6.0 Myr (~ 1.8 Myr for cooling from > 900 to 350 °C and ~ 4.0 Myr for cooling from 350 to 200 °C) whereas cooling was more prolonged during ore formation at Yaguila (~ 1.8 Myr from > 900 to 500 °C and a maximum of ~ 16 Myr from > 900 to 350 °C). All porphyritic intrusions in the ore district experienced exhumation at a rate of 0.07–0.09 mm/yr (apatite He ages between ~ 37 and 30 Ma). Combined with previous studies, this work implies that uplift of the eastern section of the Lhasa terrane expanded from central Lhasa (37–30 Ma) to southern Lhasa (15–12 Ma) at an increasing exhumation rate. All available geochronologic data reveal that magmatic–hydrothermal–exhumation activities in the Sharang–Yaguila ore district occurred within four periods of magmatism with related mineralization. Significant porphyry-type Mo mineralization was associated with Late Cretaceous–Eocene felsic porphyritic intrusions in the central Lhasa terrane, resulting from Neotethyan oceanic subduction and India–Asia continental collision. 相似文献
2.
Even casual observations of continental hot springs reveal that photosynthesis has its limits. In an effort to explore the transition to photosynthesis, field measurements of temperature and pH were made at 996 hot spring locations at Yellowstone National Park ranging from 14° to 94 °C and pH from 0.8 to 9.7. In addition, sulfide measurements were made in 426 of these locations showing concentrations up to 8820 μg L? 1 total sulfide. These data indicate that the previously established upper temperature (73–75 °C) for the transition to photosynthesis is reached in many basic hot springs, but that the transition occurs at lower temperature with decreasing pH below ~ 6.5. As an example, no strong evidence for photosynthesis was found above 45 °C at pH ~ 2. In several locations, photosynthesis appears to be suppressed despite temperatures and pH values that permit photosynthesis elsewhere. Sulfide concentrations may be responsible for the suppression of photosynthesis at these sites. Total sulfide concentrations were observed to decrease downstream in hot spring outflow channels. Abiotic processes (degassing, oxidation, mineral precipitation, etc.) are too slow to account for these decreases, suggesting an explanation from microbial sulfide oxidation that is supported by field experiments. Microbial sulfide oxidation may determine the ultimate suitability of some hot springs for microbial photosynthesis. 相似文献
3.
Paleomagnetism has played an important role in quantifying the Mesozoic evolution of “Proto-Tibet”. In this paper, we present new paleomagnetic data from five Middle-Upper Jurassic sedimentary sequences (Quemo Co, Buqu, Xiali, Suowa and Xueshan Fms.) of the eastern North Qiangtang Terrane (QT) at Yanshiping (33.6°N, 92.1°E). The new paleomagnetic results form a large dataset (99 sites, 1702 samples) and reveal a paleopole at 79.1°N/306.9°E (dp = 3.9°, dm = 6.3°) for the Quemo Co Fm., at 68.9°N/313.8°E (dp = 2.1°, dm = 3.7°) for the Buqu Fm., at 66.1°N/332.1°E (dp = 2.7°, dm = 4.6°) for the Xiali Fm., at 72.4°N/318.6°E (dp = 3.9°, dm = 6.7°) for the Suowa Fm., and at 76.9°N/301.1°E (dp = 7.9°, dm = 13.2°) for the Xueshan Fm. These results indicate clockwise (CW) rotations of ~ 19.8 ± 9.4° between ~ 171.2 and 161.7 Ma and counterclockwise (CCW) rotations of ~ 15.4 ± 13.4° between ~ 161.7 and < 157.2 Ma for Yanshiping. We attribute the change in rotation sense at approximately ~ 161.7 Ma to the initial collision of the Lhasa and Qiangtang terranes. Using this and other paleomagnetic data from the Lhasa, Qiangtang and Tarim terranes, as well as other geological evidence (e.g., tectonism-related sedimentary sequences, volcanism, and HP metamorphism), we propose a new conceptual evolution model for the Mesozoic QT and Tethyan Oceans. The Longmo Co-Shuanghu oceanic slab was subducted before 248 Ma, followed by continental collision of the North-South Qiangtang subterranes between ~ 245 and 237 Ma. The Qiangtang Terrane experienced post-collisional exhumation between ~ 237 and 230 Ma during subduction of the Jinsha oceanic slab. The collision of the Qiangtang and Songpan-Ganzi terranes occurred between ~ 230 and 225 Ma. The QT experienced post-collisional relaxation from ~ 225 to ~ 200 Ma, followed by subsidence and extension-related exhumation between ~ 200 and 162 Ma in association with subduction of the Bangong-Nujiang oceanic slab. Finally, these events were followed by the scissor-like diachronous collisions of the Lhasa and Qiangtang terranes between ~ 162 Ma and the mid-Cretaceous. 相似文献
4.
The Wiluna West small (~ 130 Mt) high-grade bedded hematite ore deposits, consisting of anhedral hematite mesobands interbedded with porous layers of acicular hematite, show similar textural and mineralogical properties to the premium high-grade low-phosphorous direct-shipping ore from Pilbara sites such as Mt Tom Price, Mt Whaleback, etc., in the Hamersley Province and Goldsworthy, Shay Gap and Yarrie on the northern margin of the Pilbara craton. Both margins of the Pilbara Craton and the northern margin of the Yilgarn craton were subjected to sub-aerial erosion in the Paleoproterozoic era followed by marine transgressions but unlike the Hamersley Basin, the JFGB was covered by comparatively thin epeirogenic sediments and not subjected to Proterozoic deformation or burial metamorphism. The Joyner's Find greenstone belt (JFGB) in the Yilgarn region of Western Australia was exhumed by middle to late Cenozoic erosion of a cover of unmetamorphosed and relatively undeformed Paleoproterozoic epeirogenic sedimentary rocks that preserved the JFGB unaltered for nearly 2 Ga; thus providing a unique snapshot of the early Proterozoic environment.Acicular hematite, pseudomorphous after acicular iron silicate, is only found in iron ore and BIF that was exposed to subaerial deep-weathering in early Paleoproterozoic times (pre 2.2 Ga) and in the overlying unconformable Paleoproterozoic conglomerate derived from these rocks and is absent from unweathered rocks (Lascelles, 2002). High-grade ore and BIF weathered during later subaerial erosion cycles contain anhedral hematite and acicular pseudomorphous goethite. The acicular hematite was formed from goethite pseudomorphs of silicate minerals by dehydration in the vadose zone under extreme aridity during early Paleoproterozoic subaerial weathering.The principal high-grade hematite deposits at Wiluna West are interpreted as bedded ore bodies that formed from BIF by loss of chert bands during diagenesis and have been locally enriched to massive hematite by the introduction of hydrothermal specular hematite. No trace of chert bands are present in the deep saprolitic hematite and hematite–goethite ore in direct contrast to shallow supergene ore in which the trace of chert bands is clearly defined by goethite replacement, voids and detrital fill. Abundant hydrothermal microplaty hematite at Wiluna West is readily distinguished by its crystallinity.The genesis of the premium ore from the Pilbara Region has been much discussed in the literature and the discovery at Wiluna West provides a unique opportunity to compare the features that are common to both districts and to test genetic models. 相似文献
5.
This paper contributes to the understanding of the genesis of epigenetic, hypogene BIF-hosted iron deposits situated in the eastern part of Ukrainian Shield. It presents new data from the Krivoy Rog iron mining district (Skelevatske–Magnetitove deposit, Frunze underground mine and Balka Severnaya Krasnaya outcrop) and focuses on the investigation of ore genesis through application of fluid inclusion petrography, microthermometry, Raman spectroscopy and baro-acoustic decrepitation of fluid inclusions. The study investigates inclusions preserved in quartz and magnetite associated with the low-grade iron ores (31–37% Fe) and iron-rich quartzites (38–45% Fe) of the Saksaganskaya Suite, as well as magnetite from the locally named high-grade iron ores (52–56% Fe). These high-grade ores resulted from alteration of iron quartzites in the Saksaganskiy thrust footwall (Saksaganskiy tectonic block) and were a precursor to supergene martite, high-grade ores (60–70% Fe). Based on the new data two stages of iron ore formation (metamorphic and metasomatic) are proposed.The metamorphic stage, resulting in formation of quartz veins within the low-grade iron ore and iron-rich quartzites, involved fluids of four different compositions: CO2-rich, H2O, H2O–CO2(± N2–CH4)–NaCl(± NaHCO3) and H2O–CO2(± N2–CH4)–NaCl. The salinities of these fluids were relatively low (up to 7 mass% NaCl equiv.) as these fluids were derived from dehydration and decarbonation of the BIF rocks, however the origin of the nahcolite (NaHCO3) remains unresolved. The minimum P–T conditions for the formation of these veins, inferred from microthermometry are Tmin = 219–246 °C and Pmin = 130–158 MPa. The baro-acoustic decrepitation analyses of magnetite bands indicated that the low-grade iron ore from the Skelevatske–Magnetitove deposit was metamorphosed at T = ~ 530 °C.The metasomatic stage post-dated and partially overlapped the metamorphic stage and led to the upgrade of iron quartzites to the high-grade iron ores. The genesis of these ores, which are located in the Saksaganskiy tectonic block (Saksaganskiy ore field), and the factors controlling iron ore-forming processes are highly controversial. According to the study of quartz-hosted fluid inclusions from the thrust zone the metasomatic stage involved at least three different episodes of the fluid flow, simultaneous with thrusting and deformation. During the 1st episode three types of fluids were introduced: CO2–CH4–N2(± C), CO2(± N2–CH4) and low salinity H2O–N2–CH4–NaCl (6.38–7.1 mass% NaCl equiv.). The 2nd episode included expulsion of the aqueous fluids H2O–N2–CH4–NaCl(± CO2, ± C) of moderate salinities (15.22–16.76 mass% NaCl equiv.), whereas the 3rd event involved high salinity fluids H2O–NaCl(± C) (20–35 mass% NaCl equiv.). The fluids most probably interacted with country rocks (e.g. schists) supplying them with CH4 and N2. The high salinity fluids were most likely either magmatic–hydrothermal fluids derived from the Saksaganskiy igneous body or heated basinal brines, and they may have caused pervasive leaching of Fe from metavolcanic and/or the BIF rocks. The baro-acoustic decrepitation analyses of magnetite comprising the high-grade iron ore showed formation T = ~ 430–500 °C. The fluid inclusion data suggest that the upgrade to high-grade Fe ores might be a result of the Krivoy Rog BIF alteration by multiple flows of structurally controlled, metamorphic and magmatic–hydrothermal fluids or heated basinal brines. 相似文献
6.
We have used geodetic techniques to improve constraints on the crustal motion of the Pamir Plateau. Three campaigns of Global Position System data acquisition between 2011 and 2015 demonstrate that, in association with the India–Asia collision, a complex pattern of crustal motion exists in the Pamir Plateau. In a north–south direction from the Indian Plate to the Hazak Block, the crust has absorbed ~ 35 mm/yr of shortening, of which ~ 35% is distributed around the Hindu Kush region (~ 12 mm/yr), and another ~ 35% is taken up around the Alai Valley (also ~ 12 mm/yr). Global Position System measurements also show ~ 5 mm/yr of shortening between the Pamir Plateau and the Tajik Basin, whereas between the Pamir and the Tarim Basin, an ~ 10 mm/yr extension rate is observed. With respect to the stable Eurasian Plate, the Pamir rotates counterclockwise at a rate of ~ 1.822°Myr− 1, with an Euler pole positioned about the west end of the Tajik Basin (37.03 ± 0.74°N, 65.89 ± 0.12°E). The strain rate field calculated from Global Position System velocities reveals that the crustal motion is consistent with localized deformation around the Hindu Kush and the Alai Valley, the latter representing a zone with strong shallow seismic activity. 相似文献
7.
The Northern Norrbotten Ore Province in northernmost Sweden includes the type localities for Kiruna-type apatite iron deposits and has been the focus for intense exploration and research related to Fe oxide-Cu-Au mineralisation during the last decades. Several different types of Fe-oxide and Cu-Au ± Fe oxide mineralisation occur in the region and include: stratiform Cu ± Zn ± Pb ± Fe oxide type, iron formations (including BIF's), Kiruna-type apatite iron ore, and epigenetic Cu ± Au ± Fe oxide type which may be further subdivided into different styles of mineralisation, some of them with typical IOCG (Iron Oxide-Copper-Gold) characteristics. Generally, the formation of Fe oxide ± Cu ± Au mineralisation is directly or indirectly dated between ~ 2.1 and 1.75 Ga, thus spanning about 350 m.y. of geological evolution.The current paper will present in more detail the characteristics of certain key deposits, and aims to put the global concepts of Fe-oxide Cu-Au mineralisations into a regional context. The focus will be on iron deposits and various types of deposits containing Fe-oxides and Cu-sulphides in different proportions which generally have some characteristics in common with the IOCG style. In particular, ore fluid characteristics (magmatic versus non-magmatic) and new geochronological data are used to link the ore-forming processes with the overall crustal evolution to generate a metallogenetic model.Rift bounded shallow marine basins developed at ~ 2.1–2.0 Ga following a long period of extensional tectonics within the Greenstone-dominated, 2.5–2.0 Ga Karelian craton. The ~ 1.9–1.8 Ga Svecofennian Orogen is characterised by subduction and accretion from the southwest. An initial emplacement of calc-alkaline magmas into ~ 1.9 Ga continental arcs led to the formation of the Haparanda Suite and the Porphyrite Group volcanic rocks. Following this early stage of magmatic activity, and separated from it by the earliest deformation and metamorphism, more alkali-rich magmas of the Perthite Monzonite Suite and the Kiirunavaara Group volcanic rocks were formed at ~ 1.88 Ga. Subsequently, partial melting of the middle crust produced large volumes of ~ 1.85 and 1.8 Ga S-type granites in conjunction with subduction related A −/I-type magmatism and associated deformation and metamorphism.In our metallogenetic model the ore formation is considered to relate to the geological evolution as follows. Iron formations and a few stratiform sulphide deposits were deposited in relation to exhalative processes in rift bounded marine basins. The iron formations may be sub-divided into BIF- (banded iron formations) and Mg-rich types, and at several locations these types grade into each other. There is no direct age evidence to constrain the deposition of iron formations, but stable isotope data and stratigraphic correlations suggest a formation within the 2.1–2.0 Ga age range. The major Kiruna-type ores formed from an iron-rich magma (generally with a hydrothermal over-print) and are restricted to areas occupied by volcanic rocks of the Kiirunavaara Group. It is suggested here that 1.89–1.88 Ga tholeiitic magmas underwent magma liquid immiscibility reactions during fractionation and interaction with crustal rocks, including metaevaporites, generating more felsic magmatic rocks and Kiruna-type iron deposits. A second generation of this ore type, with a minor economic importance, appears to have been formed about 100 Ma later. The epigenetic Cu-Au ± Fe oxide mineralisation formed during two stages of the Svecofennian evolution in association with magmatic and metamorphic events and crustal-scale shear zones. During the first stage of mineralisation, from 1.89–1.88 Ga, intrusion-related (porphyry-style) mineralisation and Cu-Au deposits of IOCG affinity formed from magmatic-hydrothermal systems, whereas vein-style and shear zone deposits largely formed at c. 1.78 Ga.The large range of different Fe oxide and Cu-Au ± Fe oxide deposits in Northern Norrbotten is associated with various alteration systems, involving e.g. scapolite, albite, K feldspar, biotite, carbonates, tourmaline and sericite. However, among the apatite iron ores and the epigenetic Cu-Au ± Fe oxide deposits the character of mineralisation, type of ore- and alteration minerals and metal associations are partly controlled by stratigraphic position (i.e. depth of emplacement). Highly saline, NaCl + CaCl2 dominated fluids, commonly also including a CO2-rich population, appear to be a common characteristic feature irrespective of type and age of deposits. Thus, fluids with similar characteristics appear to have been active during quite different stages of the geological evolution. Ore fluids related to epigenetic Cu-Au ± Fe oxides display a trend with decreasing salinity, which probably was caused by mixing with meteoric water. Tentatively, this can be linked to different CuAu ore paragenesis, including an initial (magnetite)-pyrite-chalcopyrite stage, a main chalcopyrite stage, and a late bornite stage.Based on the anion composition and the Br/Cl ratio of ore related fluids bittern brines and metaevaporites (including scapolite) seem to be important sources to the high salinity hydrothermal systems generating most of the deposits in Norrbotten. Depending on local conditions and position in the crust these fluids generated a variety of Cu-Au deposits. These include typical IOCG-deposits (Fe-oxides and Cu-Au are part of the same process), IOCG of iron stone type (pre-existing Fe-oxide deposit with later addition of Cu-Au), IOCG of reduced type (lacking Fe-oxides due to local reducing conditions) and vein-style Cu-Au deposits. From a strict genetic point of view, IOCG deposits that formed from fluids of a mainly magmatic origin should be considered to be a different type than those deposits associated with mainly non-magmatic fluids. The former tend to overlap with porphyry systems, whereas those of a mainly non-magmatic origin overlap with sediment hosted Cu-deposits with respect to their origin and character of the ore fluids. 相似文献
8.
The Guelb Moghrein copper–gold deposit in the Islamic Republic of Mauritania reopened in 2006 and has produced copper concentrate and gold since then. The deposit is hosted in Neoarchaean–Palaeoproterozoic Fe–Mg carbonate-dominated metamorphic rocks interpreted as carbonate-facies iron formation. It forms tabular orebodies controlled by shear zones in the hanging wall and footwall of this meta-iron formation. Copper and gold are hosted in a complex sulfide ore in tectonic breccia replacing Fe–Mg carbonate and magnetite. Hydrothermal monazite dates the mineralization at 2492 ± 9 Ma. Two types of aqueous fluid inclusions suggest fluid mixing at 0.75–1.80 kbar and ~ 410 °C as the mineralization and precipitation mechanism, which is temporally coincident with regional retrograde metamorphism at 410 ± 30 °C (garnet-biotite). Distal alteration zones are enriched in K, Rb and Cu, whereas orebodies are depleted in K, Rb, Sr and Ba. The copper–gold mineralization at Guelb Moghrein formed during retrograde shearing in metamorphic rocks and contemporaneous hydrothermal alteration. The stable isotope signature of alteration and ore minerals suggest an external crustal fluid source. Fluids were focused in the reactive and competent meta-iron formation. Potassium alteration, magnetite and copper–gold mineralization suggest an IOCG mineral system akin similar deposits in Australia and Brazil. 相似文献
9.
The Hengshan massif is an exhumed, mid-crustal, plutonic–metamorphic dome formed during Cretaceous crustal extension in the Jiangnan orogenic belt, central South China. Multiple thermochronometers (mica 40Ar/39Ar, apatite fission track and zircon (U–Th)/He) are applied to its footwall along a slip-parallel transect to quantify its thermal history and cooling rate, and the slip magnitude, rate, initial geometry and kinematic evolution of the low-angle Hengshan detachment fault. Our thermochronological data, in conjunction with previous ages, indicate that (1) footwall rocks cooled from ~ 700 °C to ~ 60 °C in less than 60 Myr (136–80 Ma) at variable rates ranging from ~ 50 °C/Myr to ~ 13 °C/Myr, (2) the Hengshan detachment fault accommodated ~ 8–12 km of total slip at variable slip rates from 0.14 to 1 mm/yr during tectonic exhumation, (3) the footwall has been tilted ~ 26°–50° to the east since slip began, indicating that the low-angle Hengshan detachment fault initiated at a steep dip and was passively rotated to a more gentle orientation during subsequent normal slip. This study provides compelling evidence supporting that the low-angle detachment fault in the extensional dome can be generated by the reactivation and passive rotation of an initially steep reverse fault during normal slip. In addition, our thermochronological data constrain the time of extension in the Hengshan dome between 136 and 80 Ma, which implies that the back-arc extension within South China associated with the rollback of the Paleo-Pacific slab might have lasted until at least 80 Ma. 相似文献
10.
《Gondwana Research》2016,29(4):1294-1309
The Cuddapah Basin is one of a series of Proterozoic basins that overlie the cratons of India that, due to limited geochronological and provenance constraints, have remained subject to speculation as to their time of deposition, sediment source locations, and tectonic/geodynamic significance.Here we present 21 new, stratigraphically constrained, U–Pb detrital zircon samples from all the main depositional units within the Cuddapah Basin. These data are supported by Hf isotopic data from 12 of these samples, that also encompass the stratigraphic range, and detrital muscovite 40Ar/39Ar data from a sample of the Srisailam Formation. Taken together, the data demonstrate that the Papaghni and lower Chitravati Groups were sourced from the Dharwar Craton, in what is interpreted to be a rift basin that evolved into a passive margin. The Nallamalai Group is here constrained to be deposited between 1659 ± 22 Ma and ~ 1590 Ma. It was sourced from the coeval Krishna Orogen to the east, and was deposited in its foreland basin. Nallamalai Group detrital zircon U–Pb and Hf isotope values directly overlap with similar data from the Ongole Domain metasedimentary rocks. Depositional age constraints on the Srisailam Formation are permissive with it being coeval with the Nallamalai Group and it was possibly deposited within the same basin. The Kurnool Group saw a return to Dharwar Craton derived provenance and is constrained to being Neoproterozoic. It may represent deposition in a long-wavelength basin forelandward of the Tonian Eastern Ghats Orogeny. Detrital zircons from the Gandikota Formation, which is traditionally considered a part of the Chitravati Group, constrain it to being deposited after 1181 ± 29 Ma, more than 700 Ma after the lower Chitravati Group. It is possible that the Gandikota Formation is correlative with the Kurnool Group.The new data suggest that the Nallamalai Group correlates temporally and tectonically with the Somanpalli Group of the Pranhita–Godavari Valley Basin, which is tightly constrained to being deposited at ~ 1620 Ma. These syn-orogenic foreland basin deposits firmly link the SE India Proterozoic basins to their orogenic hinterland with their discovery filling a ‘missing-link’ in the tectonic development of the region. 相似文献
11.
Most skarn deposits are closely related to granitoids that intruded into carbonate rocks. The Cihai (>100 Mt at 45% Fe) is a deposit with mineral assemblages and hydrothermal features similar to many other typical skarn deposits of the world. However, the iron orebodies of Cihai are mainly hosted within the diabase and not in contact with carbonate rocks. In addition, some magnetite grains exhibit unusual relatively high TiO2 content. These features are not consistent with the typical skarn iron deposit. Different hydrothermal and/or magmatic processes are being actively investigated for its origin. Because of a lack of systematic studies of geology, mineral compositions, fluid inclusions, and isotopes, the genetic type, ore genesis, and hydrothermal evolution of this deposit are still poorly understood and remain controversial.The skarn mineral assemblages are the alteration products of diabase. Three main paragenetic stages of skarn formation and ore deposition have been recognized based on petrographic observations, which show a prograde skarn stage (garnet-clinopyroxene-disseminated magnetite), a retrograde skarn stage (main iron ore stage, massive magnetite-amphibole-epidote ± ilvaite), and a quartz-sulfide stage (quartz-calcite-pyrite-pyrrhotite-cobaltite).Overall, the compositions of garnet, clinpyroxene, and amphibole are consistent with those of typical skarn Fe deposits worldwide. In the disseminated ores, some magnetite grains exhibit relatively high TiO2 content (>1 wt.%), which may be inherited from the diabase protoliths. Some distinct chemical zoning in magnetite grains were observed in this study, wherein cores are enriched in Ti, and magnetite rims show a pronounced depletion in Ti. The textural and compositional data of magnetite confirm that the Cihai Fe deposit is of hydrothermal origin, rather than associated with iron rich melts as previously suggested.Fluid inclusions study reveal that, the prograde skarn (garnet and pyroxene) formed from high temperature (520–600 °C), moderate- to high-salinity (8.1–23.1 wt.% NaCl equiv, and >46 wt.% NaCl equiv) fluids. Massive iron ore and retrograde skarn assemblages (amphibole-epidote ± ilvaite) formed under hydrostatic condition after the fracturing of early skarn. Fluids in this stage had lower temperature (220°–456 °C) and salinity (8.4–16.3 wt.% NaCl equiv). Fluid inclusions in quartz-sulfide stage quartz and calcite also record similar conditions, with temperature range from 128° to 367 °C and salinity range from 0.2 to 22.9 wt.% NaCl equiv. Oxygen and hydrogen isotopic data of garnet and quartz suggest that mixing and dilution of early magmatic fluids with external fluids (e.g., meteoric waters) caused a decrease in fluid temperature and salinity in the later stages of the skarn formation and massive iron precipitation. The δ18O values of magnetite from iron ores vary between 4.1 and 8.5‰, which are similar to values reported in other skarn Fe deposits. Such values are distinct from those of other iron ore deposits such as Kiruna-type and magmatic Fe-Ti-V deposits worldwide. Taken together, these geologic, geochemical, and isotopic data confirm that Cihai is a diabase-hosted skarn deposit related to the granitoids at depth. 相似文献
12.
A new paleomagnetic study on well-dated (~ 155 Ma) volcanic rocks of the Tiaojishan Formation (Fm) in the northern margin of the North China Block (NCB) has been carried out. A total of 194 samples were collected from 26 sites in the Yanshan Belt areas of Luanping, Beipiao, and Shouwangfen. All samples were subjected to stepwise thermal demagnetization. After removal of a recent geomagnetic field viscous component, a stable high temperature component (HTC) was isolated. The inclinations of our new data are significantly steeper than those previously published from the Tiaojishan Fm in the Chengde area (Pei et al., 2011, Tectonophysics, 510, 370–380). Our analyses demonstrate that the paleomagnetic directions obtained from each sampled area were strongly biased by paleosecular variation (PSV), but the PSV can be averaged out by combining all the virtual geomagnetic poles (VGPs) from the Tiaojishan Fm in the region. The mean pole at 69.6°N/203.0°E (A95 = 5.6°) passes a reversal test and regional tilting test at 95% confidence and is thus considered as a primary paleomagnetic record. This newly determined pole of the Tiaojishan Fm is consistent with available Late Jurassic poles from red-beds in the southern part of the NCB, but they are incompatible with coeval poles of Siberia and the reference pole of Eurasia, indicating that convergence between Siberia and the NCB had not yet ended by ~ 155 Ma. Our calculation shows a ~ 1600-km latitudinal plate movement and crustal shortening between the Siberia and NCB after ~ 155 Ma. In addition, no significant vertical axis rotation was found either between our sampled areas or between the Yanshan Belt and the major part of the NCB after ~ 155 Ma. 相似文献
13.
Forward modelling of Fe-rich phyllite is used to evaluate the effects of partial melting and melt loss on the concentration of iron in the residual rock package, leading to enrichment in Fe-oxide minerals (magnetite and hematite). The effect of melt loss during prograde metamorphism to peak conditions of ~ 850 °C was modelled using a series of calculated pressure–temperature (P–T) phase diagrams (pseudosections). The results show that metapelitic rocks with lower iron content are more fertile, produce more melt and therefore show a more significant increase (up to 35%) in the Fe-oxide content in the residual (melt depleted) rock package. Rocks with primary Fe-rich compositions are less fertile, lose less melt and therefore do not experience the same relative increase in the amount of Fe-oxides in the residuum. The results of the modelling have implications for the formation of economic-grade iron ore deposits in metamorphic terranes. Fe-rich compositions that represent primary ore horizons prior to metamorphism may not experience significant enrichment. However, those horizons with lower primary iron contents may be significantly upgraded as a result of melt loss, thereby improving the overall grade of the ore system. The application of the modelling to the highly metamorphosed Palaeoproterozoic Warramboo magnetite–hematite deposit in the southern Gawler Craton suggests that melt loss during granulite facies metamorphism led to upgrading of sub-economic units within the low-grade Price Metasediments to form the economically viable granulite facies Warramboo ore system. The results of this study suggest that high-temperature metamorphic terranes offer attractive exploration targets for magnetite-dominated iron ore deposits. 相似文献
14.
《Russian Geology and Geophysics》2015,56(6):885-892
Based on the analysis of experimental data on the viscosity of mafic to ultramafic magmatic melts with the use of our structure-chemical model for the calculation and prediction of the viscosity of magmas, we have first predicted that diamond-carryihg kimberlite magma must ascend from mantle to crust with considerable acceleration. The viscosity of kimberlite magma decreases by more than three times during its genesis, evolution, and ascent from mantle to crust despite the significant decrease in the temperature of the ascending kimberlite magma (~ 150 °C) and its partial crystallization and degassing. In the case of partial melting (< 1 wt.%) of carbonated peridotite in the mantle at depths of 250-350 km, high-viscosity (~ 35 Pas) kimberlite melts can be generated at ~ 8.5 GPa and ~ 1350 °C, the water content in the melt being up to ~ 8 wt.%, C(OH-) = 0-2 wt.%, and C(H2O) = 0-6 wt.%. On the other hand, during the formation of kimberlite pipes, dikes, and sills, the viscosity of near-surface kimberlite melts is much lower (~ 10 Pa s) at ~ 50 MPa and 1200 °C, the volume contents of crystals (Vcr) and the fluid phase (bubbles) (Vfl) are 35 and 5 vol.%, respectively, and the water content in magma, C(OH-), is 0.5 wt.%. On the contrary, the viscosity of basaltic magmas increases by more than two orders of magnitude during their ascent from mantle to crust. The basaltic magmas which can be generated in the asthenosphere at depths of ~ 100 km have the minimum viscosity (up to ~ 2.3 Pas) at ~ 4.0 GPa, 1350 °C, C(OH-) - 3 wt.%, and C(H2O) - 5 wt.%. However, at the final stage of evolution (e.g., during volcanic eruptions), the viscosity of basaltic magma is considerably higher (600 Pa s) at ~ 10 MPa, 1180 °C, Vcr - 30 vol.%, Vf - 15 vol.%, and C(OH-) - 0.5 wt.%. 相似文献
15.
The Han-Xing region is located in the south Taihang Mountains (TM) in the central part of the North China Craton, and is an important iron producing area. The iron deposits in this region are of skarn type, related to an Early Cretaceous high-Mg diorite complex, including gabbro diorite, hornblende diorite, diorite, diorite porphyrite, and monzonite. In this study we report the detailed mineral chemistry of the high-Mg diorites and skarn rocks. The olivine in the gabbro diorite shows chemical composition similar to that in mantle peridotite xenoliths. Clinopyroxene in the gabbro diorite is dominantly augite, with only minor diopside, whereas the clinopyroxenes in the diorite and monzonite are diopside. Amphiboles in the high-Mg diorites show compositional range from magnesiohornblende to magnesiohastingsite, with minor pargasite and tschermakite. Most plagioclase in the high-Mg diorite is andesine and oligoclase. The magnesio-biotite in gabbro diorites shows chemical characteristics of re-equilibrated primary biotites and those in calc-alkaline rocks. In the diorite and diorite porphyrite, plagioclase shows complex chemical zoning. Clinopyroxene and garnet in skarn rocks show varying FeO contents, the former containing low FeO (< 9 wt.%) and occurring as the major skarn mineral in large-scale iron deposits, and the latter within small-scale iron deposits with high FeO (mostly > 25 wt.%) content. We computed the pressure, temperature, oxygen fugacity and water contents based on the mineral chemistry of amphibole and biotite. Based on the results, the magma crystallization can be divided into two stages, one within the deep magma chamber, forming clinopyroxene, amphibole and plagioclase phenocrysts; the other after emplacement, forming the rim of phenocrysts and matrix minerals. The magma during the early stage shows high temperature (~ 900 °C–950 °C), pressure (~ 300 MPa–500 MPa), relatively high logfO2 (NNO–NNO + 2), and H2O content in melt (4%–8%). During the late stage, the magma temperature dropped to about 750 °C, and pressure came down to less than 100 MPa, with the logfO2 rising to NNO + 1–NNO + 2.The zoning of amphibole and plagioclase records the process of magma mixing and crystallization, with injection of mafic magma into the felsic magma chamber. The relatively high logfO2 and H2O content inhibited partitioning of iron into mafic minerals and favored concentration of Fe in the melt. Iron ore precipitation occurred when the magma was emplaced at shallow level, and was principally controlled by the chemical composition of carbonate wall rocks. The high logfO2, Fe3 + rich ore-forming fluid generated andradite and clinopyroxene when it reacted with limestone and dolomitic limestone respectively. 相似文献
16.
The Archaean Yilgarn Craton (Western Australia) is a world-class metallogenic province, hosting considerable resources of Au, Ag, Ni, Cu, Zn and Fe. Here we present trace element compositions of pyrite from > 30 orogenic Au and 5 volcanic hosted massive sulphide (VHMS) deposits across the Yilgarn. Pyrites from VHMS deposits tend to have higher Sn, Se, Cu, Pb, Bi and lower Ni relative to orogenic deposits. VHMS deposit pyrites commonly have Co > Ni, As > 100Au, Te > Au, Se > Te. Orogenic gold deposits could be subdivided based on association of Au with As or Te. Pyrites from AuAs ores generally have Pb/Bi > 5, Se/Te > 5, Pb/Sb < 5 and Tl/Te > 100 and the majority of Au is refractory (in pyrite structure). At the same time AuTe association pyrites are characterised by lower values of Pb/Bi, Se/Te and Tl/Te, higher values of Ag/Au, Pb/Sb and Au generally resides in inclusions of different compositions. Our data can be used at the exploration stage to distinguish between VHMS vs Orogenic Au signatures. For all studied deposits inclusion populations are summarised with implications for Au and Ag deportment. Orogenic Au deposits from the Yilgarn mostly have multistage formation histories reflected in the presence of multiple generations of pyrites. However, only some deposits record multiple high Au mineralisation events. 相似文献
17.
《Ore Geology Reviews》2010,37(4):333-349
Gold mineralization at Jonnagiri, Dharwar Craton, southern India, is hosted in laminated quartz veins within sheared granodiorite that occur with other rock units, typical of Archean greenstone–granite ensembles. The proximal alteration assemblage comprises of muscovite, plagioclase, and chlorite with minor biotite (and carbonate), which is distinctive of low- to mid-greenschist facies. The laminated quartz veins that constitute the inner alteration zone, contain muscovite, chlorite, albite and calcite. Using various calibrations, chlorite compositions in the inner and proximal zones yielded comparable temperature ranges of 263 to 323 °C and 268 to 324 °C, respectively. Gold occurs in the laminated quartz veins both as free-milling native metal and enclosed within sulfides. Fluid inclusion microthermometry and Raman spectroscopy in quartz veins within the sheared granodiorite in the proximal zone and laminated auriferous quartz veins in inner zone reveal the existence of a metamorphogenic aqueous–gaseous (H2O–CO2–CH4 + salt) fluid that underwent phase separation and gave rise to gaseous (CO2–CH4), low saline (~ 5 wt.% NaCl equiv.) aqueous fluids. Quartz veins within the mylonitized granodiorites and the laminated veins show broad similarity in fluid compositions and P–T regime. Although the estimated P–T range (1.39 to 2.57 kbar at 263 to 323 °C) compare well with the published P–T values of other orogenic gold deposits in general, considerable pressure fluctuation characterize gold mineralization at Jonnagiri. Factors such as fluid phase separation and fluid–rock interaction, along with a decrease in f(O2), were collectively responsible for gold precipitation, from an initial low-saline metamorphogenic fluid. Comparison of the Jonnagiri ore fluid with other lode gold deposits in the Dharwar Craton and major granitoid-hosted gold deposits in Australia and Canada confirms that fluids of low saline aqueous–carbonic composition with metamorphic parentage played the most dominant role in the formation of the Archean lode gold systems. 相似文献
18.
The Dagushan BIF-hosted iron deposit in the Anshan–Benxi area of the North China Craton (NCC) has two types of iron ore: quartz–magnetite BIF (Fe2O3T < 57 wt.%) and high-grade iron ore (Fe2O3T > 90 wt.%). Chlorite-quartz schist and amphogneiss border the iron orebodies and are locally present as interlayers with BIFs; chlorite-quartz schist and BIFs are enclosed by amphogneiss in some locations. The quartz–magnetite BIFs are enriched in HREEs (heavy rare earth elements) with positive La, Eu and Y anomalies, indicating their precipitation from marine seawater with a high-temperature hydrothermal component. Moreover, these BIFs have low concentrations of Al2O3, TiO2 and HFSEs (high field strength elements, e.g., Zr, Hf and Ta), suggesting that terrigenous detrital materials contributed insignificantly to the chemical precipitation. The high-grade iron ores exhibit similar geochemical signatures to the quartz–magnetite BIFs (e.g., REE patterns and Y/Ho ratios), implying that they have identical sources of iron. However, these ores have different REE (rare earth element) contents and Eu/Eu* values, and the magnetites contained within them exhibit diverse REE contents and trace element concentrations, indicating that the ores underwent differing formation conditions, and the high-grade ores are most likely the reformed product of the original BIFs.The chlorite-quartz schist and amphogneiss are characterized by high SiO2 and Al2O3 contents and exhibit variable abundances of REEs, enrichment in LREEs (light rare earth elements), negative anomalies in HFSEs (e.g., Nb, Ta, P and Ti) and positive anomalies in LILEs (large ion lithophile elements, e.g., Rb, Ba, U and K). A protolith reconstruction indicates that the protoliths of the chlorite-quartz schist are felsic volcanic rocks. SIMS and LA-ICP-MS zircon U–Pb dating indicate that this schist formed at approximately 3110 to 3101 Ma, which could represent the maximum deposition age of the Dagushan BIF. However, two groups of zircons from the amphogneiss are identified: 3104 to 3089 Ma zircons that are most likely derived from the chlorite-quartz schist and 2997 to 2995 Ma zircons, which are interpreted to represent the time of protolith crystallization. Thus, the Dagushan BIF most likely formed before 2997 to 2995 Ma. The ~ 3.1 Ga zircons yield εHf(t) values of − 8.07 to 5.46, whereas the ~ 3.0 Ga zircons yield εHf(t) values of − 3.96 to 2.09. These geochemical features suggest that the primitive magmas were derived from the depleted mantle with significant contributions of ancient crust. 相似文献
19.
The Huoqiu iron ore field in northwest Anhui Province is located in the North China Craton (NCC). As a large banded iron formation (BIF) iron ore field, ore bodies occur in a middle-high grade of Neoarchean metamorphic formation, forming a banded silicon–iron series from north to south. The main ore bodies can be divided into two sub-belts from bottom to upper layers, i.e. the A + B ore belt consisting of leptynite–schist–magnetite–quartz formation, and the D ore belt consisting of schist–marble–hematite–quartz formation. Based on a dataset from geological settings, geophysical and geochemical exploration, ore-forming conditions and structural analysis of the iron deposit, we discuss structural types, sedimentary environments, deep tectonic and ore-controlling factors as well as characteristics and distribution of this colossal BIF ore field in the Huoqiu region.Using LA-ICP-MS techniques, we obtained the oldest U–Pb age of ca. 2.7 Ga for plagioclase amphibolite as its original rock, and 1.8 Ga for magmatic granite in the Huoqiu Group. The Hf isotopes of zircon were also determined, resulting in the oldest Hf model age of 3.5 Ga.Geochemical data indicate that the protolithes of amphibolites belong to a series of subalkaline rocks with enrichments of large ion lithophile elements and depletions of high field strength elements, which are typical volcanic arc rocks. The amphibolites have low K2O concentrations with low ratios of Ti/V (22.7 to 25.9 averaging 24.5), similar to island arc tholeiite. This suggests that the iron deposit and BIF are of the Superior type in the Huoqiu region. 相似文献
20.
The North China Craton (NCC) provides a classic example of lithospheric destruction and refertilization. The timing and duration of magmatism and related metallogenesis associated with the destruction process are pivotal to understanding the geodynamic controls. In this study, we present zircon U–Pb and Hf data, Re–Os ages, and He, Ar, Pb and S isotope data from the Mujicun porphyry Cu–Mo deposit in the northern Taihang Mountains within the Central Orogenic Belt of the NCC. We constrain the timing of magmatism as 144.1 ± 1.2 Ma from zircon U–Pb data on the diorite porphyry that hosts Cu–Mo mineralization. Another U–Pb age of 139.7 ± 1.4 Ma was obtained from an epidote skarn that is located in the contact zone between the porphyry and its wall rocks. These data and five Re–Os molybdenite ages that range from 142.7 ± 2.0 Ma to 138.5 ± 1.9 Ma suggest that magmatism and mineralization occurred in about five million year duration from ~ 143 Ma to ~ 138 Ma. The He, Ar, Pb and, Hf data suggest that magmatism involved recycled Neoarchean lower crustal components, with input of heat and volatiles from an upwelling mantle. The Mujicun porphyry and associated mineralization provide a typical example for magmatism and metallogeny associated with lithospheric thinning in the NCC. 相似文献