首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Based on a large body of observational data on radio emission from the Moon, we study the dependence of lunar radio temperature variations on illumination conditions. The data were obtained with the RATAN-600 radio telescope with a high sensitivity and resolution, which has not yet been used to construct radio images of the Moon. The harmonic parameters (amplitudes and phase angles) were determined both for the average Moon and for regions with temperature anomalies revealed by the RATAN-600 observations. These parameters allow the physical properties of the lunar soil to be investigated. The distribution of the loss-angle tangent (tan ), one of the characteristics of the lunar material, over the Moon was determined. The loss-angle tangent is related to the content of ilmenite, a rock containing oxygen, iron, and titanium, in the lunar soil. Studies of the ilmenite distribution on the Moon are particularly important in view of the prospects for building a habitable lunar base that needs oxygen. It is relatively easy and cheap to extract oxygen, iron, and titanium from ilmenite.  相似文献   

2.
Seismic refraction data, obtained at the Apollo 14 and 16 sites, when combined with other lunar seismic data, allow a compressional wave velocity profile of the lunar near-surface and crust to be derived. The regolith, although variable in thickness over the lunar surface, possesses surprisingly similar seismic properties. Underlying the regolith at both the Apollo 14 Fra Mauro site and the Apollo 16 Descartes site is low-velocity brecciated material or impact derived debris. Key features of the lunar seismic velocity profile are: (i) velocity increases from 100–300 m s–1 in the upper 100 m to 4 km s–1 at 5 km depth, (ii) a more gradual increase from 4 km s–1 to 6 km s–1 at 25 km depth, (iii) a discontinuity at a depth of 25 km and (iv) a constant value of 7 km s–1 at depths from 25 km to about 60 km. The exact details of the velocity variation in the upper 5 to 10 km of the Moon cannot yet be resolved but self-compression of rock powders cannot duplicate the observed magnitude of the velocity change and the steep velocity-depth gradient. Other textural or compositional changes must be important in the upper 5 km of the Moon. The only serious candidates for the lower lunar crust are anorthositic or gabbroic rocks.Paper dedicated to Professor Harold C. Urey on the occasion of his 80th birthday on 29 April, 1973.  相似文献   

3.
We describe the future SMART-1 European Space Mission whose objective is to study the lunar surface from a polar lunar orbit. In particular, it is anticipated that selected regions of the Moon will be photographed using the AMIE camera with a mean spatial resolution of about 100 m in three spectral channels (0.75, 0.92, and 0.96 m) over a wide range of phase angles. Since these spectral channels and the AMIE resolution are close to those of the UVVIS camera onboard the Clementine spacecraft, the simultaneous processing of SMART-1 and Clementine data can be planned, for example, to obtain phase-ratio images. These images carry information on the structural features of the lunar surface. In particular, UVVIS/Clementine data revealed a photometric anomaly at the Apollo-15 landing site associated with the blowing of the lunar regolith by the lander engine. Anomalies were found in the ejection zones of several fresh craters.  相似文献   

4.
The Halo orbits originating in the vicinities of both,L 1 andL 2 grow larger, but shorter in period, as they shift towards the Moon. There is in each case a narrow band of stable orbits roughly half-way to the Moon. Nearer to the Moon, the orbits are fairly well-approximated by an almost rectilinear analysis. TheL 2 family shrinks in size as it approaches the Moon, becoming stable again shortly before penetrating the lunar surface. TheL 1-family becomes longer and thinner as it approaches the Moon, with a second narrow band of stable orbits with perilune, however, below the lunar surface.  相似文献   

5.
Physical conditions in the near-surface layer of the Moon are overviewed. This medium is formed in the course of the permanent micrometeoroid bombardment of the lunar regolith and due to the exposure of the regolith to solar radiation and high-energy charged particles of solar and galactic origin. During a considerable part of a lunar day (more than 20%), the Moon is passing through the Earth’s magnetosphere, where the conditions strongly differ from those in the interplanetary space. The external effects on the lunar regolith form the plasma-dusty medium above the lunar surface, the so-called lunar exosphere, whose characteristic altitude may reach several tens of kilometers. Observations of the near-surface dusty exosphere were carried out with the TV cameras onboard the landers Surveyor 5, 6, and 7 (1967–1968) and with the astrophotometer of Lunokhod-2 (1973). Their results showed that the near-surface layer glows above the sunlit surface of the Moon. This was interpreted as the scattering of solar light by dust particles. Direct detection of particles on the lunar surface was made by the Lunar Ejects and Meteorite (LEAM) instrument deployed by the Apollo 17 astronauts. Recently, the investigations of dust particles were performed by the Lunar Atmosphere and Dust Environment Explorer (LADEE) instrument at an altitude of several tens of kilometers. These observations urged forward the development of theoretical models for the lunar exosphere formation, and these models are being continuously improved. However, to date, many issues related to the dynamics of dust and the near-surface electric fields remain unresolved. Further investigations of the lunar exosphere are planned to be performed onboard the Russian landers Luna-Glob and Luna-Resurs.  相似文献   

6.
The existence of fossil lunar magnetism has caused speculation that the Moon had, at one time, an internally produced dynamo magnetic field. Quantitative analysis of this idea, constrained by the largest iron lunar core compatible with observations, implies that the Moon would have had to rotate faster than its breakup angular velocity in order to support a dynamo magnetic field.A paper presented at the Lunar Science Institute Conference on Geophysical and Geochemical Exploration of the Moon and Planets, January 10–12, 1973.  相似文献   

7.
This study presents the petrography, mineralogy, and bulk composition of lunar regolith breccia meteorite Northwest Africa (NWA) 7948. We identify a range of lunar lithologies including basaltic clasts (very low-titanium and low-titanium basalts), feldspathic lithologies (ferroan anorthosite, magnesian-suite rock, and alkali suite), granulites, impact melt breccias (including crystalline impact melt breccias, clast-bearing impact melt breccias, and glassy melt breccias), as well as regolith components (volcanic glass and impact glass). A compositionally unusual metal-rich clast was also identified, which may represent an impact melt lithology sourced from a unique Mg-suite parent rock. NWA 7948 has a mingled bulk rock composition (Al2O3 = 21.6 wt% and FeO = 9.4 wt%) and relatively low concentrations of incompatible trace elements (e.g., Th = 1.07 ppm and Sm = 2.99 ppm) compared with Apollo regolith breccias. Comparing the bulk composition of the meteorite with remotely sensed geochemical data sets suggests that the sample was derived from a region of the lunar surface distal from the nearside Th-rich Procellarum KREEP Terrane. Our investigations suggest that it may have been ejected from a nearside highlands-mare boundary (e.g., around Mare Crisium or Orientale) or a cryptomare region (e.g., Schickard-Schiller or Mare smythii) or a farside highlands-mare boundary (e.g., Mare Australe, Apollo basin in the South Pole–Aitken basin). The distinctive mineralogical and geochemical features of NWA 7948 suggest that the meteorite may represent lunar material that has not been reported before, and indicate that the lunar highlands exhibit wide geological diversity.  相似文献   

8.
Density models for the Moon, including the effects of temperature and pressure, can satisfy the mass and moment of inertia of the Moon and the presence of a low density crust indicated by the seismic refraction results only if the lunar mantle is chemically or mineralogically inhomogeneous. IfC/MR 2 exceeds 0.400, the inferred density of the upper mantle must be greater than that of the lower mantle at similar conditions by at least 0.1 g cm–3 for any of the temperature profiles proposed for the lunar interior. The average mantle density lies between 3.4 and 3.5 g cm–3, though the density of the upper mantle may be greater. The suggested density inversion is gravitationally unstable, but the implied deviatoric stresses in the mantle need be no larger than those associated with lunar gravity anomalies. UsingC/MR 3=0.400 and the recent seismic evidence suggesting a thin, high density zone beneath the crust and a partially molten core, successful density models can be found for a range of temperature profiles. Temperature distributions as cool as several inferred from the lunar electrical conductivity profile would be excluded. The density and probable seismic velocity for the bulk of the mantle are consistent with a pyroxenite composition and a 100 MgO/(MgO+FeO) molecular ratio of less than 80.Communication presented at the Lunar Science Institute Conference on Geophysical and Geochemical Exploration of the Moon and Planets, January 10–12, 1973.  相似文献   

9.
A computer model based on Monte Carlo techniques was developed to simulate the destruction of lunar rocks by catastrophic rupture due to meteoroid impact. Energies necessary to accomplish catastrophic rupture were derived from laboratory experiments. A crater-production rate derived from lunar rocks was utilized to calculate absolute time scales.Calculated median survival times for crystalline lunar rocks are 1.9, 4.6, 10.3, and 22 m.y. for rock masses of 10, 102, 103, and 104 g respectively. Corresponding times of 6, 14.5, 32, and 68 × 106 yr are required, before the probability of destruction reaches 0.99. These results are consistent with absolute exposure ages measured on returned rocks.Some results also substantiate previous conclusions reached by others: the catastrophic rupture process is significantly more effective in obliterating lunar rocks compared to mass wasting by single particle abrasion. The view is also corroborated that most rocks presently on the lunar surface are either exhumed from the regolith or fragments of much larger boulders, rather than primary ejecta excavated from pristine bedrock.Permanent address: Max-Planck-Institut für Kernphysik, 6900 Heidelberg, F.R.G.  相似文献   

10.
On the Dynamics of Weak Stability Boundary Lunar Transfers   总被引：1，自引：1，他引：0  
Recent studies demonstrate that lunar and solar gravitational assists can offer a good reduction of total variation of velocity Vneeded in lunar transfer trajectories. In particular the spacecraft, crossing regions of unstable equilibrium in the Earth—Moon—Sun system, can be guided by the Sun towards the lunar orbit with the energy needed to be captured ballistically by the Moon. The dynamics of these transfers, called weak stability boundary (WSB) transfers, will be studied here in some detail. The crucial Earth—Moon—Sun configurations allowing such transfers will be defined. The Sun's gravitational effect and lunar gravitational capture will be analyzed in terms of variations of the Jacobi constants in the Earth—Sun and Earth—Moon systems. Many examples will be presented, supporting the understanding of the dynamical mechanism of WSB transfers and analytical formulas will be obtained in the case of quasi ballistic captures.This revised version was published online in October 2005 with corrections to the Cover Date.  相似文献   

11.
Various lines of evidence indicate that permanent magnetization of lunar rocks, acquired during the early history of the Moon, is responsible for the weak (tens of gammas) and patchy magnetic field found at the surface of the Moon. It would be necessary to invoke a core dynamo (with all its important implications) in order to account for the inducing fieldB of not less than 103 in which lunar rocks acquired their stable permanent magnetization if no other source ofB can be found. In this connection we point out that the magnetic effects of high-velocity meteoroid impacts have not yet been ruled out. Indeed, according to rough calculations these effects might not be negligible and detailed studies would be worth carrying out. Shock waves followed by rarefaction waves would spread out into the body of the Moon from the area of impact, first demagnetizing any material shock-heated above the Curie temperature and then, as the material cools rapidly during the passage of the rarefaction wave, re-magnetizing the material to an intensity determined by the background fieldB. The main source ofB would be the pulse of electric current generated by magneto-hydrodynamic interaction between the electrically-conducting ejecta from the explosion and the weak ambient interplanetary magnetic field.This impact dynamo hypothesis also has possible implications concerning the magnetism of meteorites.  相似文献   

12.
The linear heating technique was applied to study the release of solar wind implanted He and Ne in single glass spherules and minerals of lunar soils. In addition, the diffusion of rare gases artificially implanted into simulated lunar glass was investigated. Activation energies derived for lunar glasses are much higher than for virginal glasses of similar chemical composition. Volume diffusion of the lunar surface cannot explain the high retentivity for the trapped gases. It is expermentally shown that various types of radiation damage are of paramount importance to the understanding of the secondary alterations of elemental abundances after solar wind implantation on the lunar surface.Paper dedicated to Prof. Harold C. Urey on the occasion of his 80th birthday on 29 April 1973.  相似文献   

13.
Paleocratering of the Moon: Review of post-Apollo data   总被引：1，自引：0，他引：1  
As a result of the dating of lunar samples, we are in a position to utilize the lunar surface as a recorder of environmental conditions in the Earth-Moon neighborhood in the past. Plots of crater density vs rock age at different lunar landing sites can be used to date unexplored lunar provinces. These plots also demonstrate evolution in the population of planetesimals that struck the Moon. Prior to 4.1 aeons ago, the cratering rate on the Moon was at least 103 times the present rate, and the rate declined with a half-life less than 8×107 yr. During the interval from 4.1 to 3.2 aeons ago, the number of planetesimals showed an exponential decay with a half-life about 3×108 yr, corresponding to sweep-up of particles from solar orbits somewhat similar to those of Apollo asteroids. A more nearly constant cratering rate applied in the last three aeons. These data indicate that the Moon displays at least the final stages of an ancient accretion process; they also set certain conditions on possible capture processes relating to the Moon's origin. Pre-Apollo expectations that the Moon would provide a Rosetta Stone for interpreting solar system history and planet formation thus appear justified.Paper given at Philadelphia meeting of American Association for Advancement of Science, December, 1971.  相似文献   

14.
New satellite measurements of the lunar-surface radiation temperature are used to construct the spatial angular function of thermal radiation of the Moon in the infrared (10.5–12.5 m) spectral range. The basic material for investigations is the scanned cosmic spectrozonal images of the lunar surface transmitted by the first Russian geostationary artificial meteorological satellite GOMS. The formulas for calculating the angular parameters are given, and the photometric function of thermal radiation of the Moon is plotted as a function of the incidence angle, the reflection angle, and the azimuthal angle between the planes of the incident and reflected rays.  相似文献   

15.
A study has been performed in an effort to detect a lunar signature in geomagnetic data. Ap-indices available for the period 1932–1972 have been used for this purpose. The data have been divided into some 500 lunar months which were superimposed in synchronism with the phase of the Moon. At or shortly after full Moon a peak appears which exceeds the average value by about 3 standard deviations. Possible explanations for the generation of geomagnetic disturbances by the Moon are given.Paper presented at the Conference on Interactions of the Interplanetary Plasma with the Modern and Ancient Moon, sponsored by the Lunar Science Institute, Houston, Texas and held at the Lake Geneva Campus of George Williams College, Wisconsin, between September 30 and October 4, 1974.  相似文献   

16.
The remotely controlled vehicle Lunokhod-2 travelled extensively around the edges of a linear depression unofficially called Fossa Recta. The edges of the Fossa are marked by elongated boulder fields. Three lines of reasoning suggest that the boulder fields are not the usual erratic boulders found on a normal mare surface, but are bedrock protuberances: (1) The morphology of many boulders is reminiscent of primary lava features, (2) toward the edge of the Fossa the regolith thins out; (3) a model of lunar gardening indicates that no regolith is to be expected in the upper portion of a non-impact cliff.Part of the research was conducted while L.B.R. was a participant of an exchange program between the Academy of Sciences, U.S.S.R. and the Academy of Sciences, U.S.A.  相似文献   

17.
The anomalously high number of craters with diameter less than 2.8 km, the igneous nature of rocks from the Apollo landing sites, and the possibility of outgassing magmas in the lunar crust, suggest that fluidization may be a viable mechanism for producing many of the smaller lunar craters, Fluidization craters were formed in the laboratory by blowing gas through various thicknesses of particulate material. Gas pressure, regolith thickness, and the duration of gas streaming were controlled over practical experimental limits and compared with the resultant crater morphology. Low to moderate fluidization pressures on coarsely crushed limestone (Mø = 0.40, So = =0.50) with low cohesion (ø - 43°) produced bowl shaped, basin shaped, and flat bottomed craters. Bowl shaped craters change into basin shaped and/or flat bottomed craters with long durations of gas streaming. Cone, funnel, and flat-funnel shaped craters are indicative of high fluidization pressures. Craters formed in finely crushed limestone (Mø - 1.55, So - 0.85) that is electrostatically charged by the streaming gas, are flat bottomed. Terraced craters develop from slumping during and after the discontinuation of gas flow. Central mounds inn terraced craters result from slumping into a confined space. In particulate material, fluidization craters have high circularity and axial symmetry, similar to those produced by impact. The use of an impact model and crater morphology (normal, flat bottomed, and concentric) for estimating lunar regolith depth is questioned because similar craters can be produced by fluidizationn processes in a thicker regolith.On leave at the Earth Physics Branch, Dept. of Energy, Mines and Resources, Ottawa, Canada.  相似文献   

18.
A new liquefaction theory for the origin of the flat marial and Cayley areas on the lunar surface is described. It is supposed that the flat terrain in these areas resulted from periods in the development of the Moon when these regions, although not liquid, had a sufficiently low viscosity for the surfaces to relax more or less completely to a level form. To account for this low viscosity a model is developed in which, within these regions and for relatively short periods in the early history of the Moon, preferentially high temperatures were maintained close to the lunar surface. The paper examines in some detail the possibility that these high temperatures may have resulted from instabilities in the lunar heat flow pattern caused by the presence of a surface layer of very low thermal conductivity produced by the debris of early meteorite impacts.A comparison is made between current models for the formation of the lunar surface and the theory here proposed: the advantages of the latter are enumerated and discussed.Normally at Queen Mary College, University of London, England.  相似文献   

19.
Abstract— Lunar meteorite QUE 93069 found in Antarctica is a mature, anorthitic regolith breccia with highland affinities that was ejected from the Moon <0.3 Ma ago. The frequency distribution of mineral and lithic clasts gives information about the nature of the regolith and subregolith basement near the ejection site as well as about the abundances of rock types shocked to different degrees prior to the breccia formation. Thin section QUE 93069,37 consists of 67.5 vol% fine-grained (<～130 μm) constituents and 32.5 vol% mineral and lithic clasts and an impact melt vein. The most abundant types of these clasts are intragranularly recrystallized anorthosites and plagioclases (together 26.3 vol%) and feldspathic fine-grained to microporphyritic crystalline melt breccias (21.9 vol%). Mafic crystalline melt breccias are extremely rare (1.3 vol%). Granulitic lithologies are 10.4 vol%, recrystallized feldspathic melt breccias are 15.0 vol%, and glasses are 3.5 vol%. The impact melt vein cutting across the entire thin section was probably formed subsequent to the lithification process of the bulk rock at pressures below 20 GPa, because the bulk rock never experienced a higher peak shock pressure. Lunar meteorite QUE 93069 has a higher abundance of clear glass, occurring within melt spherules, glassy fragments, and an impact melt vein than lunar meteorites ALHA81005, Y-791197, Y-82192/3, Y-86032, or MAC 88104/5. The high abundance of melt spherules indicates that this lunar meteorite contains the highest content of typical regolith components. Mafic crystalline melt breccias are much rarer in QUE 93069 than in all other lunar highland regolith breccias. The extremely low abundance of mafic components may constrain possible areas of the Moon, from which the breccia was derived. The source area of QUE 93069 must be a highland terrain lacking significant mafic impact melts or mare components.  相似文献   

20.
Material is ejected from impact craters in ballastic trajectories; it impacts first near the crater rim and then at progressively greater ranges. Ejecta from craters smaller than approximately 1 km is laid predominantly on top of the surrounding surface. With increasing crater size, however, more and more surrounding surface will be penetrated by secondary cratering action and these preexisting materials will be mixed with primary crater ejecta. Ejecta from large craters and especially basin forming events not only excavate preexisting, local materials, but also are capable of moving large amounts of material away from the crater. Thus mixing and lateral transport give rise to continuous deposits that contain materials from within and outside the primary crater. As a consequence ejecta of basins and large highland craters have eroded and mixed highland materials throughout geologic time and deposited them in depressions inside and between older crater structures.Because lunar mare surfaces contain few large craters, the mare regolith is built up by successive layers of predominantly primary ejecta. In contrast, the lunar highlands are dominated by the effects of large scale craters formed early in lunar history. These effects lead to thick fragmental deposits which are a mixture of primary crater material and local components. These deposits may also properly be named regolith though the term has been traditionally applied only to the relatively thin fine grained surficial deposit on mare and highland terranes generated during the past few billion year. We believe that the surficial highland regolith - generated over long periods of time - rests on massive fragmental units that have been produced during the early lunar history.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号