首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
The Holocene San Quintín volcanic province in northern Baja California comprises spinel-lherzolite-bearing alkali basalts. Trace element (La/Nb = 0.57–0.73; K/Rb = 402–479; LaN/YbN= 8.4, 9.9) and isotopic ratios (87Sr/86r = 0.70323–0.70352; 143Nd/144Nd = 0.512924–0.512996; 206Pb/204Pb = 19.108, 19.250; 207Pb/204Pb = 15.567, 15.589; 208Pb/204Pb = 38.82, 38.85) show that the lavas are compositionally indistinguishable from some ocean island, plume-associated basalts such as Hawaii and the Azores, and testify to an asthenospheric source for the magmas. The occurrence in Baja of such lavas may be related to the nature of the cessation of plate subduction beneath the peninsula; at present, San Quintín (and volcanic provinces to the north) are underlain by a 'no-slab window', whereas immediately to the south, remanent oceanic lithosphere may be preserved as a relict slab. This may act as a bamer to the upward passage of diapirs or magmas from the asthenosphere.  相似文献   

2.
Abstract Three types of mineral associations are described from calc-silicate granulites from the Eastern Ghats, India, where geothermobarometry in associated rocks suggests extremely high P–T conditions of metamorphism ( c . 9 ± 1 kbar, 950° C). These mineral associations are: (i) calcite + quartz + scapolite + plagioclase, (ii) calcite + scapolite + wollastonite + porphyroblastic garnet + coronal garnet and (iii) calcite + quartz + wollastonite + scapolite + porphyroblastic garnet + coronal garnet, all coexisting with K-feldspar, titanite and clinopyroxene. The first two associations evolved through nearly isobaric cooling retrograde paths, whereas the third evolved through a nearly isothermal decompression path followed by an isobaric cooling retrograde path. Textural and compositional characteristics suggest the following mineral reactions in the calc-silicate granulites: calcite + quartz = wollastonite + CO2, calcite + plagioclase = scapolite, calcite + scapolite + wollastonite = porphyroblastic garnet ± quartz + CO2, CaTs + wollastonite = coronal garnet (association ii) and wollastonite + scapolite = coronal garnet (association iii) + quartz + CO2. Andradite content in garnet was buffered by the redox equilibria wollastonite + hedenbergite + O2= andradite + quartz (association iii) and wollastonite + andradite + CaTs + scapolite = hedenbergite + calcite + grossular + O2 (association ii). The contrasting mineral parageneses have been ascribed to interplay of variables such as X CO2, f O2, f HCl in the fluid, bulk Na content and the nature of the retrograde P–T–X CO2 paths through which the rocks evolved.  相似文献   

3.
Calc-silicate granulites from the Bolingen Islands, Prydz Bay, East Antarctica, exhibit a sequence of reaction textures that have been used to elucidate their retrograde P–T path. The highest temperature recorded in the calc-silicates is represented by the wollastonite- and scapolite-bearing assemblages which yield at least 760°C at 6 kbar based on experimental results. The calc-silicates have partially re-equilibrated at lower temperatures (down to 450°C) as evidenced by the successive reactions: (1) wollastonite + scapolite + calcite = garnet + CO2, (2) wollastonite + CO2= calcite + quartz, (3) wollastonite + plagioclase = garnet + quartz, (4) scapolite = plagioclase + calcite + quartz, (5) garnet + CO2+ H2O = epidote + calcite + quartz, and (6) clinopyroxene + CO2+ H2O = tremolite + calcite + quartz.
The reaction sequence observed indicates that a CO2 was relatively low in the wollastonite-bearing rocks during peak metamorphic conditions, and may have been further lowered by local infiltration of H2O from the surrounding migmatitic gneisses on cooling. Fluid activities in the Bolingen calc-silicates were probably locally variable during the granulite facies metamorphism, and large-scale CO2 advection did not occur.
A retrograde P–T path, from the sillimanite stability field ( c. 760°C at 6 kbar) into the andalusite stability field ( c. 450°C at <3 kbar), is suggested by the occurrence of secondary andalusite in an adjacent cordierite–sillimanite gneiss in which sillimanite occurs as inclusions in cordierite.  相似文献   

4.
Results of electron microprobe and microthermometric studies of samples collected from the Bouvet Triple Junction Region (BTJR) during a joint Russian-Italian geological expedition on the R/V Academician Nikolaj Strakhov (1994) have revealed new data on the composition of basaltic magmas and oceanic hydrothermal fluids connected with magmatic processes. Detailed analysis of basaltic glasses shows that the modem Mid-Atlantic Ridge (MAR) rift valley is composed of normal mid-ocean ridge basalts with low concentrations of K2 O and TiOz (N-MORB), while its flanks are more enriched with these components approaching E-MORB. A marked influence of the Bouvet hot spot volcanism on magma generation on the South-West Indian Ridge (SWIR) near Bouvet Island is observed. Basaltic melts in this area belong to alkalic and transitional series and have maximum contents of K2O, TiO2, H2O.
Microthermometric analyses of fluid inclusions in the samples from the BTJR have revealed major differences in the oceanic hydrothermal fluid systems on the MAR and near SWIR, which depends on the peculiarities of magma. In the area of the MAR (with dry melts) only H2O solution inclusions in quartz were found; thus, seawater is probably the only primary source of hydrothermal fluids (NaCl + MgCl2+ H2O; T = 170–200°C). In the SWIR area (with the high content of water in melts) syngenetic liquid CO2 and H2O solution inclusions in quartz indicate the influence of the magmatic fluid component on the ore-forming water/carbon dioxide solutions (NaCl + CaC12+ H2O + CO2; T = 200–310 °C; P = 900–1700 bar).  相似文献   

5.
High-pressure metamorphic rocks exposed in the Bantimala area, c . 40  km north-east of Ujung Pandang, were formed as a Cretaceous subduction complex with fault-bounded slices of melange, chert, basalt, turbidite, shallow-marine sedimentary rocks and ultrabasic rocks. Eclogites, garnet–glaucophane rocks and schists of the Bantimala complex have estimated peak temperatures of T  =580–630 °C at 18  kbar and T  =590–640 °C at 24  kbar, using the garnet–clinopyroxene geothermometer. The garnet–omphacite–phengite equilibrium is used to estimate pressures. The distribution coefficient K D1=[( X pyr)3( X grs)6/( X di)6]/[(Al/Mg)M2,wm (Al/Si)T2,wm]3 among omphacite, garnet and phengite is a good index for metamorphic pressures. The K D1values of the Bantimala eclogites were compared with those of eclogites with reliable P–T  estimates. This comparison suggests that peak pressures of the Bantimala eclogites were P =18–24  kbar at T  =580–640 °C. These results are consistent with the P–T  range calculated using garnet–rutile–epidote–quartz and lawsonite–omphacite–glaucophane–epidote equilibria.  相似文献   

6.
A reaction producing jadeitic pyroxene in metagreywackes of the northern Diablo Range has been identified on the basis of mineral distribution, isograd patterns and composition of coexisting minerals. The appearance of jadeitic pyroxene (∼Jd80) is closely followed by the disappearance of pumpellyite, which indicates that pumpellyite plays a major role in the pyroxene-producing reaction. A new projection from hematite, lawsonite, chlorite, quartz and H2O on to the NaAlO2-FeO-MgO ternary confirms the role of pumpellyite in pyroxene production and suggests a reaction of the form: 1.00 pumpellyite + 0.31 chlorite + 8.71 albite + 0.70 hematite + 2.00 H2O = 8.54 jadeite + 0.57 glaucophane + 3.09 lawsonite + 5.26 quartz. Metagreywackes of the northern Diablo Range were metamorphosed under conditions of P H2O= P total at 200-300 °C and 7.5-10.0 kbar. Despite the low temperatures attained during metamorphism, the assumption of equilibrium yields results consistent with field observations and phase relations.  相似文献   

7.
The proposed geothermobarometer is based on an empirical calibration which takes account of two equilibria involving the tremolite, edenite, pargasite and hastingsite components in amphiboles. It has applications to assemblages found in metabasic rocks of widely different chemical compositions (magnesian to Fe-rich metabasalts), and for metamorphism ranging from lower greenschist to highest amphibolite facies. Knowing the Si(T1), Aliv, Alvi, Fe3+, Fe2+, Mg, Ca, NaM4, NaA and A vacancy in an amphibole, and the Al3+ and X Mg in coexisting epidote and chlorite, it is possible to calculate two values of In K d for this assemblage. These equilibria involve edenite-tremolite and (pargasite/hastingsite)-tremolite end-members in amphibole (the calculation program is given). For these equilibria, the isopleths (iso-values of K d) have been calculated for 0.27 < X Mg < 0.75 and 0 < X Fe3+= Fe3+/(Fe3++ Alvi) < 0.8. It is then possible to determine pressure and temperature directly when X Mg, X Fe3+, In K d for tremoliteedenite and In K d for (pargasite/hastingsite)-tremolite are known. Application of this geothermobarometer is limited to Ca-free plagioclase assemblages, and complete P–T paths can be drawn only if all the minerals are considered together. Phase relations at successive stages of crystallization can be constrained by studying the relationships between the coexisting minerals, their zoning and the metamorphic fabrics.  相似文献   

8.
Calcium Isotopic Composition of Various Reference Materials and Seawater   总被引:1,自引:0,他引:1  
A compilation of δ44/40Ca (δ44/40Ca) data sets of different calcium reference materials is presented, based on measurements in three different laboratories (Institute of Geological Sciences, Bern; Centre de Géochimie de la Surface, Strasbourg; GEOMAR, Kiel) to support the establishment of a calcium isotope reference standard. Samples include a series of international and internal Ca reference materials, including NIST SRM 915a, seawater, two calcium carbonates and a CaF2 reference sample. The deviations in δ44/40Ca for selected pairs of reference samples have been defined and are consistent within statistical uncertainties in all three laboratories. Emphasis has been placed on characterising both NIST SRM 915a as an internationally available high purity Ca reference sample and seawater as representative of an important and widely available geological reservoir. The difference between δ44/40Ca of NIST SRM 915a and seawater is defined as -1.88 O.O4%o (δ44/42CaNISTSRM915a/Sw= -0.94 0.07%o). The conversion of values referenced to NIST SRM 915a to seawater can be described by the simplified equation δ44/40CaSa/Sw44/40CaSa/NIST SRM 915a - 1.88 (δ44/42CaSa/Sw44/42CaSa/NIST SRM 915a - 0.94). We propose the use of NIST SRM 915a as general Ca isotope reference standard, with seawater being defined as the major reservoir with respect to oceanographic studies.  相似文献   

9.
The carbonate-carbon (CO2) content of forty-one geochemical reference samples has been determined by coulometric method following acid treatment of the sample for releasing CO2. The method is superior to the conventional methods in speed, accuracy, sensitivity, specificity, and the coverage of CO2 range. The results on NBS limestone samples agree well with the certified values. The precision of the method is 0.5 % r.s.d., and the practical detection limit is 10 ppm C.  相似文献   

10.
The Fourier transform infrared spectra of individual conodonts with various CAI values indicate definite changes in conodont francolite during diagenesis. Steady decarbonation can be observed in the increasing intensity of the band with the wavenumber 2340 an-1, which is assigned to trapped molecular CO2. Carbon dioxide originates from decomposing CO2-3-ions occupying the B-site in francolite. Furthermore, the intensity of the water-deformation band at 1644 cm-1 decreases with higher CAI values. These changes of intensity can be quantified by calculating the maximum extinction (Emax) for the corresponding absorption maxima and correlated with the CAI. Unaltered conodonts have a relative variable water 'content' and very little CO2. Up to a CAI value of 4 conodont francolite continuously expells water and carbon dioxide is trapped. Conodonts with CAI = 5 have similar water 'contents' to CAI = 4 conodonts, but decarbonation continues to take place during this stage of diagenesis.  相似文献   

11.
The ratio between the thickness of the sedimentary sequences offscraped from the subducting plate ( H c) and the average thickness of the backstop ( H b) is expected to significantly influence vergence partitioning in thrust wedges. A series of simple sandbox experiments was performed to study the role of the H c/ H b ratio in model thrust wedges. The results obtained show that thrust wedges with H c/ H b values lower than 1 are essentially pro-ward verging, with minor retro-ward faulting; H c/ H b values greater than 1 imply an increase of vergence partitioning. When a threshold value is exceeded, fully partitioned, doubly vergent thrust wedges develop. Comparison with natural submarine thrust wedges suggests that these experimental results may provide useful insights on the evolution of structural architecture at convergent margins.  相似文献   

12.
The chemical analysis by EMPEDS of 140 samples in cores from six Red Sea troughs and basins has led to the discovery in the Nereus Deep of high vanadium concentrations (up to 1.3% V2O3) in several bulk samples, and to the isolation of a major magnetite phase. This vanado-magnetite, remarkable for its high content of vanadium (mean = 1.45% V2O3) and its lack of titanium, is frequently zoned, the V-content decreasing toward the outer zones. Oxides with up to 42% V2O3, have also been found. Since the origin of the magnetite is clearly authigenic, its high vanadium and low titanium concentrations are traced back to the differential hydrothermal leaching of Fe—Ti-oxides which occur profusely in basic eruptive rock clasts, actually present in some of the overlying seams.  相似文献   

13.
Geochemical investigations carried out at the Campano–Lucano Apennine (Southern Italy) revealed the presence of fluids composed of a mixing between components of shallow and deep origin, where mantle-derived helium is also detectable. For the gas phase, the deep component is represented by both CH4 and CO2-rich gases, while the shallow one is N2-dominated. Coinciding with the 3 April 1996  M L=4.9 earthquake, the CH4-rich component mixed with the shallow, N2-dominated one at the Tramutola well (Val d'Agri), displaying wide variations in mixing proportions. In contrast, no significant modifications occurred in relation to the 1998 M L=5.5 event. According to the collected data, an earthquake-related transient modification of local crustal permeability is suggested for the 1996 event. The different crustal response to the two events may be related to different stress distributions around the epicentres or may suggest a different tectonic connection between the Val d'Agri and the two earthquake locations.  相似文献   

14.
Oxygen isotope geothermometers for metamorphic rocks   总被引:10,自引:1,他引:10  
The Chicago mineral-carbonate oxygen isotope fractionation curves have been combined with mineral-water fractionation data for jadeite, zoisite and rutile and new data for grossular-water to provide a set of self-consistent mineral-pair calibrations. The A coefficients in the equation 1000 In α= A × 106T-2 of the new mineral-pair fractionations are
Jadeite Zoisite Grossular Rutile
Quartz 1.69 2.00 3.03 5.02
Jadeite 0.31 1.34 3.33
Zoisite 1.03 3.02
Grossular 1.99
The isotopic fractionation properties of natural pyralspite garnet [(Ca, Fe, Mg, Mn)3Al2Si3O12] can be approximated by those of the grossular end-member. Appropriate substitutions also yield coefficients for the solid-solution minerals: sodic pyroxene and epidote, e.g.
A quartz-sodic pyroxene= 2.75 - 1.06Xjd,
A quartz-epidote= 2.00 + 0.75Xps
where X Jd and X Ps are the mole fractions of the jadeite and pistacite components, respectively.
The new data set is particularly suitable for the geothermometry of metamorphic rocks. δ18O data from minerals of the high-pressure metamorphic rocks of the Sesia Zone of Italy and Cyclades Complex of Greece yield well-constrained mean temperatures of 572 and 478 C, respectively. Type III blueschist metabasalts of the Franciscan Formation of California give mean quartz-garnet temperatures of 354 C.  相似文献   

15.
Abstract: Major and rare earth element contents are reported for Late Archean banded iron formations (BIFs) in the Bababudan Group of the Dharwar Craton, South India. The BIFs are mostly composed of SiO2 (average1ρ = 54.88.1 wt%) and Fe2O3* (44.38.2 wt%). The Al2O3 and TiO2 contents are remarkably low, suggesting that detrital components were starved during the BIF deposition. The BIFs have a LREE-enriched pattern with a relatively high (La/Yb)N (6.644.07). Total REE concentrations (RE) vary from 5.2 to 65.3 ppm. The REE patterns are characterized by the presence of a very large negative Ce anomaly (Ce/Ce*: 0.13-0.83) and a positive Eu anomaly (Eu/Eu*: 0.96-2.45). The Eu/Eu* decreases and (La/Yb)N increases with a increase of RE. These correlations of REE indices are similar to those of modern hydrothermal iron-rich sediments near a mid-ocean ridge (MOR). Greenstones associated with the BIFs have MORB-like geochemical features. These geochemical and geological lines of evidence indicate that the depositional site of the BIFs was remote from a continent and/or island arc and that the BIFs were in situ hydrothermal sediments near a MOR. A striking negative Ce anomaly in the BIFs indicates that oxygenated deep-sea environments emerged at 2.9-2.7 Ga. The existence of contemporaneous Mn deposits in the Dharwar Craton supports this assertion. Our scenario of oxygen in the Earth's surface of the Late Archean is different from long-held notion that the atmosphere and ocean were persistently anoxic throughout the Archean.  相似文献   

16.
A Possible Role of Boiling in Ore Deposition: A Numerical Approach   总被引:2,自引:0,他引:2  
Abstract. A possible role of boiling of the H2O-NaCl-CO2(-H2S) fluid in ore deposition has been examined numerically by using the equations of state (EOS) of Duan et al. (1995, 1996), a modified EOS of Bowers and Helgeson (1983) and the water-rock interaction simulator MIX99 (Hoshino et al., 2000).
The following three models are examined to evaluate an efficiency of boiling on mineral precipitation: (1) hypothetical non-boiling process, (2) hypothetical boiling process with sulfur partitioned only in liquid phases and (3) boiling process in which partition ratios of H2S between liquid and vapor phases are assumed to be the same as those of CO2. The processes are simulated from 450C and 900 bar to 310C and 620 bar with an analytical step of 10C / 20 bar. Boiling occurs below 400C in the latter two processes when the initial composition (in mole fraction) of the fluid is: XH2o = 0.84, XNaC1 = 0.10 and XCo2 = 0.06.
Ore deposition occurs abruptly at a boiling point when the partition ratios of total sulfur (Xsvap/Xsliq) are as high as those of total carbon during boiling. A decrease of concentration of sulfur in the liquid phase during boiling leads to an increase of pH of the solution, resulting in propelling mineral precipitation. It has been made clear that a possible role of boiling in ore formation mainly depends on the partition ratios of sulfur between the liquid and vapor phases, although they cannot be estimated accurately by the currently available EOS.  相似文献   

17.
Abstract. The Onsen site is an active submarine hydrothermal system hosted by the Desmos caldera in the Eastern Manus Basin, Papua New Guinea. The hydrothermal fluid is very acidic (pH=1.5) and abundant native sulfur is deposited around the vent. The δ34S values of native sulfur range from -6.5 to -9.3 %o. δ34S values of H2S and SO4 in the hydrothermal fluid are -4.3 to -9.9 %o and +18.6 to +20.0 %o, respectively. These δ34S values are significantly lower than those of the other hydrothermal systems so far reported. These low δ34S values and the acidic nature of the vent fluids suggest that volcanic SO2 gas plays an important role on the sulfur isotope systematic of the Onsen hydrothermal system. Relationship among the δ34S values of S-bearing species can be successively explained by the model based on the disproportionation reaction starting from the volcanic SO2 gas. The predicted δ34S values of SO2 agree with the measured whole rock δ34S values. δD and δ18O values of clay minerals separated from the altered rock samples also suggest the contribution of the magmatic fluid to the hydrothermal system. Present stable isotopic study strongly suggests that the Onsen hydrothermal site in the Desmos caldera is a magmatic submarine hydrothermal system.  相似文献   

18.
Abstract Nearly pure CO2 fluid inclusions are abundant in migmatites although H2O-rich fluids are predicted from the phase equilibria. Processes which may play a role in this observation include (1) the effects of decompression on melt, (2) generation of a CO2-bearing volatile phase by the reaction graphite + quartz + biotite + plagioclase = melt + orthopyroxene + CO2-rich vapour, (3) selective leakage of H2O from CO2+ H2O inclusions when the pressure in the inclusion exceeds the confining pressure during decompression, and (4) enrichment of grain-boundary vapour in CO2 by subsolidus retrograde hydration reactions.  相似文献   

19.
A simple and reliable method to separate rare earth elements (REE) from Mg, Fe, K, Na, Ca and Ba in ultramafic rocks has been developed, thereby concentrating their abundances. The sample (0.3 g) was digested with HF and HNO3 in a PTFE bomb, placed in a stainless steel container and, after drying, the insoluble residue was dissolved in 6 ml of 10% v/v HNO3. Following the addition of 50% triethanolamine and 30% m/v NaOH solution, the REE were precipitated along with Mg(OH)2, such that the majority of Fe, K and Na in the solution could be separated by centrifuging. The precipitate was dissolved in 1 ml HNO3 and a buffer solution of NH4Cl/NH4OH at pH = 9.0 was added to precipitate the REE along with any remaining Fe as Fe(OH)3, and so achieve separation from Mg, Ca and Ba, which remained in the solution. In this way, REE could be separated from major elements and were concentrated by a factor of about 60. The recovery of REE was more than 95% using this method. Four ultramafic rock reference materials, PCC-1 (USGS), JP-1 (GSJ), DZE-1, DZE-2 (IGGE) and one new proficiency testing sample GeoPT12 (GAS Serpentinite) were analysed by ICP-MS using indium as an internal standard. The quantitation limits were about 0.02–0.2 ng g−1. Smooth chondrite-normalised REE patterns were obtained with a precision for REE determination of about 2–9%.  相似文献   

20.
Determination of the Absolute Hydrogen Isotopic Ratio of V-SMOW and SLAP   总被引:1,自引:0,他引:1  
By mixing 1H2O and 2H2O, both with accurately known purity, samples were prepared with 2H/1H ratios close to those of the international isotopic water standards: V-SMOW and SLAP. A mass spectrometrical comparison of these calibration samples with the actual water standards revealed:
2H/1H of V-SMOW = (155.95 ± 0.08) × 10−6
2H/1H of SLAP = (89.12 ± 0.07) × 10−6
δ2HV-SMOW(SLAP) =−428.5 ± 0.5 %  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号