首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 343 毫秒
1.
Lineations within mylonites exhumed in the hanging wall of New Zealand's active Alpine Fault zone have a complicated relationship to contemporary plate kinematics. The shear zone is triclinic and macroscopic object lineations are not usually parallel to the simple shear direction, despite high total simple shear strains (γ ≥ 150). This is mostly because the lineations are inherited from pre-mylonitic fabrics, and have not been rotated into parallelism with the mylonitic stretching direction (which pitches c. 44° in the fault plane). Furthermore, some lineations have been variably rotated depending on whether they are present in shear bands or microlithons, which accommodated bulk strains with different vorticities. Total strains required to obtain parallelism between the finite maximum principal stretching direction calculated from transpression models and these mylonitic lineations, are pure shear stretch, S1 ∼ 3.5; simple shear 11.7 < γ < 150. The observations and numerical models also show that linear features are not rotated much during simple shear because they initially lie within the shear plane, and that inherited fabric components may not be destroyed until very high simple shear strains have been attained.  相似文献   

2.
详细评述了剪切带运动学和内部几何学研究的新进展。剪切带内的递进变形一般为三斜对称,单斜剪切带(包括简单剪切带)是特例情形。理论模拟表明,如同许多天然剪切带中所见到的,在三斜剪切带中,拉伸线理的方位可从近水平到平行于倾向连续变化。过去一般将拉伸线理的方向当作剪切运动方向的做法是以简单剪切模式为基础的,不适合于一般剪切带。在三斜剪切带中,拉伸线理和剪切方向之间不存在简单关系。然而,C面上的韧性滑动擦痕平行于剪切方向发育,是剪切方向的可靠标志。因此,在剪切带运动学解释中区分韧性滑动擦痕与拉伸线理非常重要。  相似文献   

3.
Abstract

This paper describes the tectono-metamorphic evolution of a segment of the Precambrian deep crust, in the southern Madagascar island. This crust corresponds to an Archaean basement reworked by a widespread, late panAfrican event (550–580 Ma) during the formation of the Mozambican belt. The finite geometry and associated metamorphism are depicted by satellite imaging, field mapping and P-T estimations using both conventional thermobarometric methods and TWEEQ software program with internally consistent thermodynamic data and uniform set of solution models. The structural pattern developed during high-grade metamorphism shows the juxtaposition of domains with complex fold geometries separated by a 15 km wide ductile shear zone. Within the folded domains, kilometre scale interference patterns associated with strongly dipping metamorphic stretching lineations can be described as superposed folding (F1 and F2 folds). The tight and upright F2 folds result from East-West horizontal shortening. The shear zone is defined by homogeneous orientations of steep foliations, sub-horizontal stretching lineations, and kilometre scale strain gradient. Within the shear zone, we observe dominant non-coaxial criteria at various scales that are consistent with a sinistral strike-slip system during D2 deformation stage. Nevertheless, we have also found in the shear zone, geometries typical of a horizontal shortening. Such a strain pattern is characteristic of transpression tectonics.

The synkinematic metamorphic conditions are estimated on mafic garnetiferous metabasites. Results show that regional transpression tectonics has developed under very high and constant thermal regime (about 800°C). A pressure gap, of about 3 kbar between the domains separated by the shear zone is identified. This implies tectonic coupling of two different structural levels during tranpressive tectonic.  相似文献   

4.
Cataclastic lineations   总被引：1，自引：0，他引：1  
This paper describes a stretching lineation developed on the S-foliations of cataclasites and fault gouges from the Akaishi Tectonic Line (ATL), central Japan. The lineation is called a ‘cataclastic lineation’, and appears to result from homogeneous laminae flow of cryptocrystalline matrix clay minerals and the preferred orientation of fractured porphyroclasts. Slickenlines overprint these textures forming cataclastic lineations. These two kinds of linear structures are developed at large angles to one another.The orthogonal projection of the perpendicular of the intersection of S-foliations, C-surfaces and R1 shears (B-axis) onto the C-surface, which defines the shear direction, is parallel to the orthogonal projection of cataclastic lineation on the C-surface. In addition, planes cut parallel to the cataclastic lineation and perpendicular to the C-surface show distinctive asymmetric structures indicating left-lateral shear, which coincides with the main fault movement of the ATL as defined by displacement of tectonic units, S-C-surfaces and R1 shears. In contrast, planes parallel to the slickenlines and perpendicular to the C-surface show no asymmetric fabrics. Thus, cataclastic lineations are considered to indicate the shear direction of the ATL during formation of the cataclasites, whereas the slickenlines indicate shear directions of later, superficial movements along the ATL which have no relationship to the main shear direction.  相似文献   

5.
The Sanabria region (Central Iberian Zone, Variscan belt of Spain) shows an asymmetric thermal dome marked by migmatites accompanied by the Ribadelago and the Sotillo plutons. These small plutons display pronounced mineralogical variations. Biotite granodiorites and tonalites prevail, and granites and gabbros are common. Both plutons are confined in the releasing stepover of a transpressional shear zone that strikes 120°E and dips 70°SW. Most of the igneous rocks form sheets parallel to the shear zone. Magnetic foliations and lineations in the igneous rocks are parallel, respectively, to the shear bands and stretching lineations observed in the shear zone. The formation of these igneous sheets at high angle to the main axis of the regional field stress is explained by a combination of the fault-valve behaviour of the shear zone with the power of melt overpressure to open and ascend through previously formed planar structures, like S- or C-planes.  相似文献   

6.
Khalil Sarkarinejad   《Tectonophysics》2007,442(1-4):49-65
The Ghouri area in southwest Iran exposes a cross section through the Zagros orogenic belt. The area provides an opportunity to investigate quantitative finite strain (Rs), kinematic vorticity number (Wk), proportions of pure shear and simple shear components, sense of shear indicators, steeply plunging lineations, and other moderate to steeply plunging stretching lineations in a transpressional zone. Based on a classical strain analysis of deformed microfossils with oblate strain ellipsoid shape, the Zagros orogenic belt is classified as a pure-shear dominated zone of transpression, but asymmetry of shear-sense indicators suggests that a significant component of simple shear was involved along the deformation zone boundaries. The long axes of the microfossils and stretched pebbles of a deformed conglomerate were used to indicate the stretching direction in this zone. The stretching lineations have a steep to moderate plunge but a constant strain magnitude. Characteristics of dextral inclined transpressional kinematics in the Zagros continental collision zone were quantified and indicate an estimated k-value < 1, an angle between the maximum horizontal axis of the instantaneous strain ellipsoid and the zone boundary (θ = 32°), asymmetrical dextral shear-sense indicators, and an angle of relative plate motion (α = 25°).  相似文献   

7.
Abstract

The schists and gneisses of the Kanmantoo Group in the eastern Mt. Lofty Ranges show a well marked foliation and lineation. The foliation seen in the field is usually parallel to the bedding. The micas have a preferred orientation parallel to the lineation, resulting in girdles or partial girdles in the fabric diagrams. Quartz does not appear to have any preferred orientation. The lineations plunge to the S.S.E. or N.N.W., the mean plunge being about 20° to the S.S.E. This agrees with the plunge of the fold axes measured in the field and with the plunge of major structures deduced from field mapping. The area is thus one in which all the lineations are “b” lineations.  相似文献   

8.
The E-W running Salem-Attur shear zone demarcates the tectonic boundary between Archaean Dharwar Craton in the north and Proterozoic Southern granulite terrane in the south. This study reveals that the shear zone is a low angle thrust. The thrust zone is around 10 m thick and it merges with the main shear zone along the strike. The thrust is developed on charnockite near Odyarpatti, which is retrograded into schists. Further, it is marked by gently dipping mylonitic foliation and subhorizontal lineation. The S-C fabric, mantled porphyroclasts and intragranular faults indicate northeasterly slip along the thrust. Recumbent shear folds SF1 are developed within the thrust zone. The thrust has been folded by late stage F2 fold which has brought variation in the orientation of the mylonitic foliation from subhorizontal to vertical attitude; the mylonitic lineations have been rotated to subvertical orientation also. Additionally, the F2 crenulations and shear cleavages and intersection lineations are superimposed on the mylonitic fabric. Thrusting along the Salem-Attur shear zone is probably the cause for upliftment of the charnockites to the upper crust. Post-upliftment stage has witnessed brittle deformation in the form of development of shear fractures in NNE-SSW and E-W directions. Pseudotachylites are emplaced along these fractures.  相似文献   

9.
太行山南段自立庄韧性剪切带变形特征   总被引：1，自引：0，他引：1  
张祥信 《地质与勘探》2021,57(1):166-174
太行山南段临城自立庄地区古元古界甘陶河群中低级变质岩中发育一条左行逆冲型韧性剪切带。自立庄韧性剪切带出露长约10 km,宽约1 km,走向NNE,往西缓倾,在EW方向上由若干条强变形带与其间的弱变形域或岩块组成,平面上呈现平行式的组合特征。该韧性剪切带内发育糜棱岩、拉伸线理和皱纹线理、不对称褶皱、石香肠构造和构造透镜体、S-C面理和旋转碎斑等宏观和微观构造。S-C面理、旋转碎斑、不对称褶皱等宏微观变形特征一致表明自立庄韧性剪切带上盘由西往东逆冲的运动学性质。在对韧性剪切带宏观、微观构造特征研究基础上,结合区域资料,认为自立庄韧性剪切带的形成与华北克拉通古元古代末期西部陆块与东部陆块的EW向碰撞拼合有关,是18.5 Ga吕梁运动的产物。自立庄韧性剪切带的厘定为太行山南段古元古代构造演化提供了基础资料。  相似文献   

10.
胶南地区的伸展作用——以胶南—诸城一带为例   总被引：11，自引：0，他引：11  
胶南地区的胶南—诸城一带存在两期不同方向的伸展构造。早期以形成近ＥＮ向的拉伸线理为特征，并在不同构造层次上显示出不同的变形。出露于研究区中部桃林尚庄隆起的含榴辉岩片麻岩中，主要以ＬＳ的组构为特征，显示出早期伸展作用下地壳岩石的垂直轴缩短、ＥＷ向拉伸的共轴应变；而在把下地壳含榴辉岩片麻岩与以变沉积岩为主的中上地壳岩石分开的韧性滑脱带上，此期伸展作用则表现为从东向西剪切的非共轴简单剪切变形，具有近水平的拉伸线理及近水平的ＥＷ向剪切褶皱和鞘褶皱枢纽。晚期伸展作用表现为近ＳＮ的伸展垮塌作用，形成向北和向南倾斜的两条韧性正剪切带，且遭受低角闪岩高绿片岩相条件下的透入性均匀简单剪切变形，剪切方向分别向北和向南。  相似文献   

11.
Abstract

Neogene deformations have deeply disturbed the initial architecture of the pile of nappes within the Eastern Betic zone. The Arc of Aguilas, displaying a southeast-facing concavity, is a spectacular example of such a post-nappe structuration. Miocene deposits involved in the torsion of the Arc provide a chronology of the deformation. The Arc of Aguilas is one element within a system of rigid-plastic indentation including the following units, from the inner (SE) to the outer (NW) zones : — A rigid block, little deformed, located in the present day abyssal plain, play the part of the indenter.

— A structural pad corresponding to the Aguilas Arc itself. It was severely folded during Miocene times.

— A large peripheral zone mainly subjected to faulting during the Neogene (essentially strike-slip faults). These faults control the evolution of different types of sedimentary basins during the Late Neogene (Tortonian to Pliocene).

Two large shear zones: N020 sinistral (Palomares and Terreros faults), N100 dextral (Las Moreras faults) guided the deformation of the Aguilas Arc within a compressive stressfield of which major tensor axis oscillated between NW-SE and N-S.  相似文献   

12.
Plane-strain shear zones between rigid walls which do not rotate but which converge and move laterally relative to each other are here-in referred to as convergent shear zones. Analysis of the deformation in convergent shear zones indicates the existence of two flow apophyses, one parallel to the shear zone wall and the other inclined to the wall. Modeling of the development of fabrics in convergent shear zones indicates the occurrence of stable orientations in which S and C′ do not rotate and are oppositely inclined to the shear-zone boundary. The stable C′ orientation is parallel to the inclined flow apophysis and also is parallel to the approach velocity vector of the opposing walls of the shear zone. If it can be demonstrated from field relationships that the walls of a shear zone were rigid and remained parallel, then the occurrence of a flow apophysis inclined in the direction of shear is diagnostic of convergent shear. S and C′ fabrics in the Ridge Road and Gundy Creek shear zones of the southern Appalachian Piedmont are interpreted to indicate a convergent shear regime with an approach velocity vector oriented ~ 10–13 ° clockwise from the strike of the zones.  相似文献   

13.
Field, microstructural, and anisotropy of magnetic susceptibility (AMS) or magnetic fabric studies were applied to identify the sequence and character of the Pan-African structures in the basement of Eastern Cameroon at both sides of the regional scale Bétaré-Oya Shear Zone (BOSZ). The NE-SW trending BOSZ separates older gneisses and migmatites towards SE (domain I) from the younger rocks of the Lom meta-volcano-sedimentary basin towards NW (domain II). In domain I, early, ductile compressional deformation occurred in two events, D1 and D2, under relatively high T conditions. During subsequent cooling, strain partitioned between the competent basement gneisses with only mild compression and the bordering shear zone (BOSZ) with intense simple shear-wrenching (D3). Strain in the less competent rocks of domain II is dominated by simple shear, strike-slip wrenching (D3), with an earlier stage of compressional deformation preserved only in some low strain pods.Magnetic fabrics (AMS) document a progressive change from oblate ellipsoids towards prolate ellipsoids in domain I, when proceeding from the south towards the BOSZ. Foliations are mostly steep but define a girdle with a pole plunging gently towards WSW. The magnetic lineations also plunge mostly towards WSW at shallow angles. These fabrics indicate a compression approximately normal to the BOSZ, which is also the SE margin of the Lom Basin. In the Lom metasediments (domain II), AMS ellipsoids are typically oblate. Foliations trend NE-SW with mostly steep dips. Magnetic lineations plunge gently NE or SW. This fabric with foliations mostly steep and subparallel with the major BOSZ, combined with generally subhorizontal lineations implies the BOSZ as a Pan-African strike–slip shear zone with a subordinate component of compression.At a larger scale, the area is part of a continent-scale shear zone, separating external Pan-African domains of compression along the northern margin of the Congo craton from internal domains dominated by high-angle strike–slip and transpressional deformation. Together with published data, the present study thus demonstrates that transpression is a regional phenomenon in the Pan-African orogen of central and eastern Cameroon.  相似文献   

14.
Mubarak shear belt provides an opportunity to investigate quantitative finite strain (Rs), proportions of pure shear and simple shear components, sense of shear indicators, subhorizontal to steeply plunging mineral lineations, in a dextral transpressional zone. The structural style of the Mubarak shear belt is consistent with dextral transpression within the Central Eastern Desert where dextral and reverse shear have developed simultaneously with the regional foliation. The high strain zone of the Mubarak shear belt is characterized by steeply dipping foliation with sub-horizontal stretching lineation (simple shear) surrounded by thrust imbrications with slightly plunging stretching lineations. Strain estimates from the Mubarak shear belt are used to determine how pure and simple shear components of deformation are partitioned. The axial ratios in XZ sections range from 1.16 to 2.33 with the maximum stretch, S X , ranges from 1.06 to 1.48. The minimum stretch, S Z , ranges from 0.65 to 0.92 indicating a moderate variation in vertical shortening. Volcaniclastic metasediments and metagabbros were subjected to prograde low-grade regional metamorphism in the range of greenschist to lower amphibolite facies (450–650°C at 2–4 kbar). Medium pressure (6–8 kbar at 530°C) was estimated from the high strain zone within the dextral strike-slip shear zones. Retrograde metamorphism occurred at a temperature range of 250–280°C. There is a trend towards decreasing the ratio of 100Mg/(Mg + Fetot + Mn) away from the high strain zone of the Mubarak shear belt. Integrated strain and temperature estimates indicate that the simple shear (non-coaxial) components of deformation played a significant role in formation and exhumation of the Mubarak shear belt during the accumulation of finite strain and consequently during progressive transpression and thrusting.  相似文献   

15.
Schistose mylonitic rocks in the central part of the Alpine Fault (AF) at Tatare Stream, New Zealand are cut by pervasive extensional (C′) shear bands in a well-understood and young, natural ductile shear zone. The C′ shears cross-cut the pre-existing (Mesozoic—aged) foliation, displacing it ductilely synthetic to late Cenozoic motion on the AF. Using a transect approach, we evaluated changes in geometrical properties of the mm–cm-spaced C′ shear bands across a conspicuous finite strain gradient that intensifies towards the AF. Precise C′ attitudes, C′-foliation dihedral angles, and C′–S intersections were calculated from multiple sectional observations at both outcrop and thin-section scales. Based on these data the direction of ductile shearing in the Alpine mylonite zone during shear band activity is inferred to have trended >20° clockwise (down-dip) of the coeval Pacific-Australia plate motion, indicating some partitioning of oblique-slip motion to yield an excess of “dip-slip” relative to plate motion azimuth, or some up-dip ductile extrusion of the shear zone as a result of transpression, or both. Constant attitude of the mylonitic foliation across the finite strain gradient indicates this planar fabric element was parallel to the shear zone boundary (SZB). Across all examined parts of the shear zone, the mean dihedral angle between the C′ shears and the mylonitic foliation (S) remains a constant 30 ± 1° (1σ). The aggregated slip accommodated on the C′ shear bands contributed only a small bulk shear strain across the shear zone (γ = 0.6–0.8). Uniformity of per-shear slip on C′ shears with progression into the mylonite zone across the strain gradient leads us to infer that these shears exhibited a strain-hardening rheology, such that they locked up at a finite shear strain (inside C′ bands) of 12–15. Shear band boudins and foliation boudins both record extension parallel to the SZB, as do the occurrence of extensional shear band sets that have conjugate senses of slip. We infer that shear bands nucleated on planes of maximum instantaneous shear strain rate in a shear zone with Wk < 0.8, and perhaps even as low as <0.5. The C′ shear bands near the AF formed in a thinning/stretching shear zone, which had monoclinic symmetry, where the direction of shear-zone stretching was parallel to the shearing direction.  相似文献   

16.
Abstract

Two groups of stretching lineations can be distinguished in the Central Alpine " root zone " between Ticino and Mera :

1) Steeply plunging lineations formed during retrograde metamor-Phism under amphibolite/greenschist facies conditions indicate an uplift movement of the Central Alps. The lineations can be related to an important back-thrusting event of late Oligocene/early Miocene age.

2) Gently plunging lineations formed under lower greenschist facies conditions display a pattern typical of a dextral strike-slip system. These lineations are of early Miocene age.

This cpmbined movement, achieved by ductile deformation along the lnsubric line was followed by a stage of brittle deformation in a dextral strike-slip system (= Tonale line).

The signification of this interpretation is shown in a new crustal cross section through the Central Alpine/Southern Alpine border zone in the Iicino area.  相似文献   

17.
Fabrics in the mid-crustal Bronson Hill zone of the southern New England Appalachian orogen record a range of apparent finite strains and conflicting kinematics, but structural relationships indicate coeval development. At the smallest scale of this study, shortening was accommodated in granitic orthogneiss, while transcurrent deformation was partitioned into relatively thin zones of metastratified rocks along the margins. The Monson orthogneiss can be broadly characterized by subvertical to steeply dipping S > L tectonites, subvertical to subhorizontal stretching lineations, closed to isoclinal folds, and dextral/reverse kinematics. The east-bounding Conant Brook shear zone and Greenwich syncline are characterized by steeply dipping mylonitic foliations, a range of lineations, and dextral/reverse kinematic indicators. The west-bounding Mt. Dumplin high strain zone is comprised of steeply dipping mylonites, subhorizontal lineations, and sinistral/normal kinematics. These structures reflect coeval partitioned dextral transpression, vertical extrusion, and north-directed lateral escape of the orthogneiss that was facilitated by bounding conjugate shear zones. Comparison of structural subdomains with transpressional modeling indicates vertical pseudo-monoclinic to inclined triclinic coaxial to simple shear influenced transpression. Compatibility between laterally adjacent subdomains was maintained by meso-/microscale partitioning. Absolute and relative timing constraints show that transpression was sustained from 330 Ma to 300 Ma.  相似文献   

18.
桐柏地区高压变质地体在地壳中的抬升机制   总被引：9，自引：7，他引：2  
崔建军  胡健民  刘晓春 《岩石学报》2009,25(9):2165-2176
桐柏杂岩位于秦岭与大别造山带之间,南北两侧为NWW-SEE向延伸的含榴辉岩高压变质地体,其构造就位过程及其与高压变质地体的构造关系为地质学家们所关注.本文研究表明,所谓的桐柏杂岩实际上是一个早白垩世花岗质片麻岩杂岩体,其内包裹一定数量的三叠纪中高级变质岩石.桐柏杂岩南北两条边界韧性剪切带具有相反的运动学指向,分别为大型右行和左行韧性剪切带,其形成时代为131Ma.这两条韧性剪切带中的剪切面理分别朝SSW和NNE向倾斜,韧性剪切带及杂岩体内部发育的拉伸线理均稳定地朝SEE方向缓倾伏.而在杂岩体的东端发育低角度近南北向韧性剪切变形带,其糜棱面理朝SEE方向低角度缓倾斜,矿物拉伸线理也朝SEE方向低角度缓倾伏,运动学标志指示东侧地质体朝295°～310°的方向逆冲.因此,桐柏杂岩实际上被一个顺造山带的韧性剪切带所围限,这个韧性剪切带及杂岩体内部韧性变形运动学指示了一个早白垩世由东向西的低角度抬升过程,而这一过程直接导致了含榴辉岩高压变质地体沿着造山带的方向从地壳深部抬升到近地表.这一研究结果对理解和认识桐柏-大别-苏鲁地区高压一超高压变质地体的晚期抬升过程具有重要意义.  相似文献   

19.
The Alpi Apuane region of the Northern Apennines appears to have been deformed within a large-scale, low-angle shear zone with an overthrust sense of movement. The presence of mineral stretching lineations, folds progressively rotated into the X strain direction, and schistosities which intersect the nappe boundaries at small angles suggest that a component of shear strain occurred during the deformation. The strain ratios and orientations on two-dimensional sections have been determined from deformed marble breccias, reduction spots, and oncalites. Data from three or more non-perpendicular, non-principal sections have been combined to determine the finite strain ellipsoids at 33 sites within the shear zone.The finite strains have been separated into components of simple shear (γ), longitudinal strain (λ), and volume change (Δ). Algebraic expressions have been derived and graphs constructed which enable components of γ, γ and Δ, and γ and λ to be determined directly from a knowledge of strain ratio (R) within the shear zone and the angle (θ) between the principal strain direction and the shear zone boundary. The Alpi Apuane data indicate that neither simple shear alone, nor simple shear with volume change can satisfactorily explain the observed strains. Consideration of simple shear plus longitudinal strain leads to a general relationship in which the value of shear increases, and the values of longitudinal strain change along a SW-NE profile across the zone. Integration of the resulting shear strain-distance curves gives a minimum displacement of 4 km within the shear zone. Combination of the finite strains with the total time of deformation known from K/Ar studies leads to average strain rates from 1.4 to 9.6 × 10−15 sec−1.A characteristic flat-ramp-flat geometry initially formed the boundaries of what was later to develop into the overthrust shear zone, and deformation of the underlying crystalline basement is believed to have occurred by ductile shearing. Estimates of 21% crustal shortening for the region suggest that the crustal thickness prior to deformation was approximately 20 km in this part of the Northern Apennines.  相似文献   

20.
Within the Albany–Fraser Orogen of southwestern Australia, the Coramup Gneiss is a NE–SW trending zone of high‐strain rocks that preserves a detailed record of orogenesis related to Mesoproterozoic convergence of the West Australian and Mawson cratons. New structural, metamorphic and U–Pb SHRIMP zircon age data establish that the Coramup Gneiss underwent high‐grade tectonism during both Stage I (c. 1290 Ma) and Stage II (c. 1170 Ma) of the Albany–Fraser Orogeny. Stage I commenced with c. 1300 Ma high‐T, low‐P M1a metamorphism during extension, and the formation of small‐scale ptygmatic folds within a subhorizontal S1a gneissosity. High‐P M1b metamorphism at c. 1290 Ma was accompanied by the transposition and shearing of S1a into a composite, shallow SE‐dipping S1b foliation, and the development of tight recumbent F1b folds with S1‐parallel axial surfaces and asymmetries indicating NW‐directed thrusting. The preservation of a similar P–T–time record in the Fraser Complex (NE of the Coramup Gneiss) is consistent with large‐scale, NW‐directed Stage I thrusting of the Mawson Craton margin over the south‐eastern edge of the West Australian Craton. Stage II tectonism in the western Coramup Gneiss involved high‐T, low‐P M2a metamorphism and the formation of subvertical SE‐dipping D2 shear zones, shallow SW‐plunging L2 mineral stretching lineations, and NW‐verging F2 folds with S2‐parallel axial surfaces. A synkinematic pegmatite dyke emplaced into a D2 shear zone yielded a U–Pb SHRIMP zircon age of 1168 ± 12 Ma. Kinematic indicators suggest a combination of pure shear flattening perpendicular to S2, and dextral simple shear. However, contemporaneous structures elsewhere in the Albany–Fraser Orogen are consistent with continued NW–SE convergence at craton‐scale during Stage II, and oblique compression in the Coramup Gneiss is attributed to the arcuate geometry of the orogen‐scale deformation front.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号