首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 593 毫秒
1.
ABSTRACT In the Hlinsko region (Variscan Bohemian Massif, Czech Republic) a major extensional shear zone separates low-grade metasedimentary series (Hlinsko schists) and high-grade rocks of the Moldanubian terrane (Svratka Crystalline Unit). During late-Variscan extension, a tonalite intruded syntectonically into the normal ductile shear zone, and caused contact metamorphism of the overlying schists. Concurrent syntectonic sedimentation of a flysch series took place at the top of the hangingwall schists. In order to decipher the detailed petrological evolution of the Hlinsko unit situated in the hangingwall of this tectonic contact, a phase diagram approach and petrogenetic grids, calculated with the thermocalc computer program, were used. The crystallization/deformation relationships and the paragenetic analysis of the Hlinsko schists define a P–T path with an initial minor increase in pressure followed by cooling. Calculated pseudosections constrain this anticlockwise P-T evolution to the upper part of the andalusite field between 0.36 and 0.40 GPa for temperatures ranging from 570 to 530°C. A low aH2O is required to explain the presence of andalusite-biotite-bearing assemblages, and could be related to the presence of abundant graphite. In contrast, the footwall rocks of the Svratka Crystalline Unit record decompression from around 0.8 GPa at a relatively constant temperature, followed by cooling. Thus, the footwall and the hangingwall units display opposite, but convergent P–T histories. Decompression in the footwall rocks is related to a rapid exhumation. We propose that the inverse, anticlockwise P–T path recorded in the hangingwall pelites is related to the rapid, extension-controlled sedimentation of the overlying flysch series.  相似文献   

2.
The Wadi Fatira area occurs at the southern margin of the Northern Eastern Desert (NED) of Egypt and is occupied by highly sheared metavolcanics tectonically alternated with banded iron formations and intruded by Barud tonalite–granodiorite, post-tectonic gabbroic and granitic intrusions. Detailed structural investigation showed that the schists and migmatitic amphibolites are formed by shearing in metavolcanics and syntectonic Barud tonalite–granodiorite due to movement along the Wadi Fatira shear zone (WFSZ). This shear zone starts as a NW–SE striking fault along Wadi Barud Al Azraq and the Eastern part of Wadi Fatira and turns to a E–W trending fault to the north of Wadi Fatira. Microstructural shear sense indicators such as asymmetric geometry of porphyroclasts such as σ-type and asymmetric folds deforming fine-grained bands which are frequently found around porphyroclasts indicate sinistral sense of shearing along the WFSZ. This shear zone is characterized by transitions from local convergence to local extension along their E–W and NW–SE trending parts, respectively. The NW–SE part of the WFSZ is of about 200 m in width and characterized by synmagmatic extensional features such as intrusion of synkinematic tonalite, creation of NE–SE trending normal faults, and formation of migmatitic amphibolites and schlieric tonalites. This part of the shear zone is metamorphosed under synthermal peak metamorphic conditions (725°C at 2–4 kbar). The E–W compressional part of the WFSZ is up to 3 km in width and composed of hornblende, chlorite, actinolite, and biotite schists together with sheared intermediate and acidic metatuffs. Contractional and transpressional structures in this part of the WFSZ include E–W trending major asymmetrical anticline and syncline, nearly vertical foliation and steeply pitching stretching lineations, NNE dipping minor thrusts, and minor intrafolial folds with their hinges parallel to the stretching lineation. P–T estimates using mineral analyses of plagioclase and hornblende from schists and foliated metavolcanics indicate prograde metamorphism under medium-grade amphibolite facies (500–600°C at 3–7 kbar) retrogressed to low-grade greenschist facies (227–317°C). The foliation in Barud tonalite–granodiorite close to the E–W part of the WFSZ runs parallel to the plane of shearing and the tonalite show numerous magmatic flow structures overprinted by folding and ductile shearing. The WFSZ is similar to structures resulted from combined simple shear and orthogonal shortening of oblique transpressive shear zones and their sense of movement is comparable with the characteristics of the Najd Fault System.  相似文献   

3.
The Wadi El-Shush area in the Central Eastern Desert (CED) of Egypt is occupied by the Sibai core complex and its surrounding Pan-African nappe complex. The sequence of metamorphic and structural events in the Sibai core complex and the enveloping Pan-African nappe can be summarized as follows: (1) high temperature metamorphism associated with partial melting of amphibolites and development of gneissic and migmatitic rocks, (2) between 740 and 660 Ma, oblique island arc accretion resulted in Pan-African nappe emplacement and the intrusion of syn-tectonic gneissic tonalite at about 680 ± 10 Ma. The NNW–SSE shortening associated with oblique island arc accretion produced low angle NNW-directed thrusts and open folds in volcaniclastic metasediments, schists and isolated serpentinite masses (Pan-African nappe) and created NNE-trending recumbent folds in syn-tectonic granites. The NNW–SSE shortening has produced imbricate structures and thrust duplexes in the Pan-African nappe, (3) NE-ward thrusting which deformed the Pan-African nappe into SW-dipping imbricate slices. The ENE–WSW compression event has created NE-directed thrusts, folded the NNW-directed thrusts and produced NW-trending major and minor folds in the Pan-African nappe. Prograde metamorphism (480–525 °C at 2–4.5 kbar) was synchronous with thrusting events, (4) retrograde metamorphism during sinistral shearing along NNW- to NW-striking strike-slip shear zones (660–580 Ma), marking the external boundaries of the Sibai core complex and related to the Najd Fault System. Sinistral shearing has produced steeply dipping mylonitic foliation and open plunging folds in the NNW- and NE-ward thrust planes. Presence of retrograde metamorphism supports the slow exhumation of Sibai core complex under brittle–ductile low temperature conditions. Arc-accretion caused thrusting, imbrication and crustal thickening, whereas gravitational collapse of a compressed and thickened lithosphere initiated the sinistral movement along transcurrent shear zones and low angle normal ductile shear zones and consequently, development and exhumation of Sibai core complex.  相似文献   

4.
金山金矿产于赣东北断裂带的次级剪切带中,其成矿作用与韧性剪切带的动力变质作用密切相关。本文通过对矿区金矿体的地质特征和运动学特征的分析,认为金山金矿成矿期经历了两期韧性剪切作用,即早期由NNW向SSE的韧性推覆剪切,晚期沿NE方向的左行韧性走滑剪切,分别形成NW向超糜棱岩型矿体和NE方向石英脉型矿体,两期韧剪变形均发生在新元古代,对应于江南造山带在碰撞造山阶段和后造山伸展阶段的动力变质事件。成矿后,矿区先受到NW向的挤压应力场作用,形成NE走向的逆断层、NW走向的张性断层以及SN走向的左行压扭断层,之后转为NW向的拉张应力场,形成NE走向的正断层。金山金矿床的构造变形特征指示了赣东北断裂带活动的阶段性,赣东北地区在晋宁期经历了两期构造-岩浆-变质事件;加里东-印支期构造活动比较弱;燕山期本区构造-岩浆活动强烈,引起赣东北断裂带的再次活动。  相似文献   

5.
The High Himalayan Crystalline Sequence in north-central Nepal is a 15-km-thick pile of metasediments that is bound by the Main Central Thrust to the south and a normal fault to the north. The Langtang section through the metasediments shows an apparent inversion of metamorphic isograds with high-P, kyanite-grade rocks exposed beneath low-P, sillimanite-grade rocks. Textural evidence confirms that the observed inversion is a result of a polyphase metamorphic history and phase equilibria studies indicate that thermal decoupling has occurred within a mechanically coherent section of crust. Rocks now exposed at the base of the High Himalayan thrust sheet underwent Barrovian regional metamorphism (M1) prior to 34 Ma in the early stages of the Himalayan orogeny, recording metamorphic conditions of T= 710 ± 30° C, P= 9 ± 1 kbar. After the activation of the Main Central Thrust, which emplaced these metapelites southwards onto the lower grade Lesser Himalayan formations, the upper part of the thrust sheet was overprinted by a second heating event (M2), resulting in sillimanite-grade metamorphism and anatexis of metapelites at T= 760 ± 30° C, P= 5.8 ± 0.4 kbar between 17 and 20 Ma. Crustally derived, leucogranite magmas have been emplaced into low-grade Tethyan sediments on the hangingwall of the normal fault that bounds the northern limit of the metapelitic sequence. The cause of the selective heating of the upper section of the metasediments during M2 cannot be reconciled with either post-thrusting thermal relaxation or advection models. The cause of M2 remains problematical but it is suggested that heat focusing has occurred at the top of the High Himalayan Crystalline Sequence as a result of movement on the normal fault blanketing metapelites of high heat productivity with low-grade sediments of low thermal conductivity. This model implies that the normal fault was active before M2, consistent with decompression textures that formed during, or shortly after, sillimanite-grade metamorphism.  相似文献   

6.
Contact metamorphism has been recognized along a 4 km wide belt adjacent to the shallow‐dipping eastern margin of the Arthursleigh Tonalite, an Early Devonian pluton of the Marulan Batholith, eastern New South Wales. In Ordovician psammitic and pelitic rocks three zones of progressive contact metamorphism range from muscovite + biotite + chlorite assemblages in the outer zone to K‐feldspar + cordierite assemblages adjacent to the pluton and in metasedimentary xenoliths. Retrograde phenomena include extensive replacement of metamorphic minerals by ‘sericite’ and chlorite. Calcareous metasediments adjacent to the tonalite typically contain assemblages of quartz + calcic plagioclase + ferrosalite + sphene, or wollastonite + calcite + diopside with minor grossularite and vesuvianite. Thermal effects in volcanic rocks along the western margin of the pluton are confined to recrystallization of the groundmass.

The regional geology indicates confining pressures of approximately 1 kbar at the time of emplacement of the tonalite. Contact metamorphic temperatures were estimated from two‐feldspar geothermometry to attain a maximum of approximately 590°C for rocks in the innermost zone of the aureole and 700°C for the xenoliths. Fluid compositions attending progressive contact metamorphism were water‐rich (Xco2<0.2) and, during cooling, these fluids probably account for the extensive retrograde hydration observed in the aureole.  相似文献   

7.
Ion probe U‐Th‐Pb dating of zircons from the Late Archaean granites of the Norseman region of the southeastern Yilgarn shows the existence of two distinct magmatic episodes. Large regional tonalite and granodiorite plutons were emplaced between 2685 and 2690 Ma, whereas large regional granite, and small tonalite and leucogranite plutons that intrude the greenstones have ages of 2660–2665 Ma. A small body of granite that intrudes the western edge of the greenstones has an inferred emplacement of 2672 ± 7Ma, and contains inherited zircon that is ～2800 Ma. The monzogranite core from a second pluton in a similar structural position also contains ～2800 Ma zircon; this age is similar to published Sm‐Nd and Rb‐Sr whole rock ages for banded gneisses associated with other members of this suite of domal plutons and is interpreted as representing the age of a significant component within the source region for these distinctive rocks.

Available geochemical and isotopic data are interpreted as indicating derivation of both the older granodiorite and younger granite suites through anatexis of pre‐existing crust of broadly andesitic composition, whereas both the domal granites and the small, late tonalite plutons could have been derived by anatexis of heterogeneous material similar to that represented by the banded gneisses.

If regional metamorphism was related to the emplacement of large volumes of felsic magma within the upper crust, as suggested by Binns et al. (1976), then the Norseman area has probably undergone two periods of regional metamorphism of comparable intensity at approximately 2660 and 2685 Ma.  相似文献   

8.
A characteristic feature of the Moldanubian part of the central European Variscides is late-orogenic high-T/low-P metamorphism. Its past history and the possible reasons for this metamorphism are highlighted by the tectonometamorphic development at the south– eastern margin of the Bohemian massif. During the Variscan orogeny, at ca. 340?Ma, two different crustal segments were juxtaposed by thrusting (the Drosendorf unit on top of the Monotonous unit). This probably marks a collisional event that is widespread in the southeastern Moldanubian zone. The collision was followed by crustal uplift accompanied by strong heating in the lowermost structural unit (Monotonous unit). During the subsequent orogenic collapse, the Moldanubian nappe pile was thrust over parts of the Moravo-Silesian terrane. A late stage of crustal extension under greenschist-facies conditions is linked with pluton emplacement. In general, magmatic underplating as well as delamination of the lithospheric mantle explains the high-T/low-P metamorphism and the large-scale plutonism in the southeastern Moldanubian zone.  相似文献   

9.
Ductile extensional movements along the steeply inclined Hoher-Bogen shear zone caused the juxtaposition of Teplá-Barrandian amphibolites, granulites, and metaperidotites against Moldanubian mica schists and paragneisses. Garnet pyriclasites are well preserved within low-strain domains of this shear zone. Their degree of metamorphism is significantly higher than that of the surrounding rocks. Microstructural and mineral chemical data suggest in situ formation of the garnet pyriclasite by dehydration of pyroxene amphibolite at T>750–840°C and P<10–13 kbar including recrystallization-accommodated grain-size reduction of plagioclase and clinopyroxene, nucleation of garnet, and breakdown of amphibole into garnet+clinopyroxene+rutile. Subsequent decompression and retrograde extensional shearing led to the formation of mylonitic epidote amphibolite. The presence of lower crustal and mantle-derived slices within the Hoher-Bogen shear zone supports the view that (a) in Upper Devonian times the Teplá-Barrandian unit was thrust over Moldanubian rocks as a complete crustal unit, and (b) that during the subsequent Lower Carboniferous orogenic collapse, the garnet pyriclasite and metaperidotite were scraped off from the basal parts of the Teplá-Barrandian unit being dragged into the Hoher-Bogen shear zone due to dramatic and large-scale elevator-style movements. Received: 23 March 1999 / Accepted: 25 August 1999  相似文献   

10.
The Greiner shear zone in the Tauern Window, Eastern Alps, changes from a zone of distributed (dominantly sinistral) shear in supracrustal rocks to a series of narrow, gully forming dextral splays where it enters basement gneisses. Within these splays, granodiorite is transformed into quartz‐poor biotite and/or chlorite schists, reflecting hydration, removal of Si, Ca and Na, and concentration of Fe, Mg and Al. Stable isotope analyses show a prominent increase in δD and a decrease in δ18O from granodiorite into the shear zones. These changes indicate significant channelized flow of an externally derived, low‐δ18O, high‐δD fluid through the shear zones. The shear zone schists are chemically similar to blackwall zones developed around serpentinite bodies elsewhere in the Greiner zone and the stable isotope data support alteration via serpentinite‐derived fluid. Monazite in schist from one shear zone yields spot dates of 29–20 Ma, indicating that the fluid influx and switch from sinistral to dextral shear occurred at or shortly after the thermal peak of the Alpine orogeny (c. 30 Ma). We suggest that Alpine metamorphism of serpentinites released large amounts of high‐δD, low‐δ18O, Si‐undersaturated, Fe + Mg‐saturated fluids that became channelized along prior zones of weakness in the granodiorite. Infiltration of this fluid facilitated growth of chlorite and biotite, which in turn localized later dextral strain in the narrow splays via cleavage‐parallel slip. This dextral strain event can be linked to other structures that accommodated tectonic escape of major crustal blocks during dextral transpression in the Eastern Alps. This study shows that serpentinite devolatilization can play an important role in modifying both the chemistry and rheology of surrounding rocks during orogenesis.  相似文献   

11.
Strongly deformed volcaniclastic metasediments and ophiolitic slices hosting the Sukari gold mineralization display evidence of a complex structural evolution involving three main ductile deformational events (D1–D3). D1 produced ENE-trending folds associated with NNW-propagating thrust slices and intrusion of the Sukari granite (689 ± 3 Ma). D2 formed a moderately to steeply dipping, NNW-trending S2 foliation curved to NE and developed arcuate structure constituting the Kurdeman shear zone (≤ 595 Ma) and East Sukari imbricate thrust belt. Major NE-trending F2 folds, NW-dipping high-angle thrusts, shallow and steeply plunging mineral lineation and shear indicators recorded both subhorizontal and subvertical transport direction during D2. D3 (560–540 Ma) formed NNE-trending S3 crenulation cleavage, tight F3 folds, Sukari Thrust and West Sukari imbricate thrust. The system of NW-trending sinistral Kurdeman shear zone (lateral ramps and tear faults) and imbricate thrusts (frontal ramps) forming the actuate structure developed during SE-directed thrusting, whereas the prevailing pattern of NNE-trending dextral Sukari shear zone and imbricate thrusts forming Sukari thrust duplex developed during NE-directed tectonic shearing. Sukari granite intruded in different pluses between 689 and 540 Ma and associated with at least four phases of quartz veins with different geometry and orientation. Structural analysis of the shear fabrics indicates that the geometry of the mineralized quartz veins and alteration patterns are controlled by the regional NNW- and NE-trending conjugate zones of transpression. Gold-bearing quartz veins are located within NNW-oriented sinistral shear zones in Kurdeman gold mine area, within steeply dipping NW- and SE dipping thrusts and NE- and NS-oriented dextral and sinistral shear zones around Sukari mine area, and along E-dipping backthrusts and NW-SE and N-S fractures in Sukari granite. The high grade of gold mineralization in Sukari is mainly controlled by SE-dipping back-thrusts branched from the major NW-dipping Sukari Thrust. The gold mineralization in Sukari gold mine and neighboring areas in the Central Eastern Desert of Egypt is mainly controlled by the conjugate shear zones of the Najd Fault System and related to E-W directed shortening associated with oblique convergence between East and West Gondwana.  相似文献   

12.
Mubarak shear belt provides an opportunity to investigate quantitative finite strain (Rs), proportions of pure shear and simple shear components, sense of shear indicators, subhorizontal to steeply plunging mineral lineations, in a dextral transpressional zone. The structural style of the Mubarak shear belt is consistent with dextral transpression within the Central Eastern Desert where dextral and reverse shear have developed simultaneously with the regional foliation. The high strain zone of the Mubarak shear belt is characterized by steeply dipping foliation with sub-horizontal stretching lineation (simple shear) surrounded by thrust imbrications with slightly plunging stretching lineations. Strain estimates from the Mubarak shear belt are used to determine how pure and simple shear components of deformation are partitioned. The axial ratios in XZ sections range from 1.16 to 2.33 with the maximum stretch, S X , ranges from 1.06 to 1.48. The minimum stretch, S Z , ranges from 0.65 to 0.92 indicating a moderate variation in vertical shortening. Volcaniclastic metasediments and metagabbros were subjected to prograde low-grade regional metamorphism in the range of greenschist to lower amphibolite facies (450–650°C at 2–4 kbar). Medium pressure (6–8 kbar at 530°C) was estimated from the high strain zone within the dextral strike-slip shear zones. Retrograde metamorphism occurred at a temperature range of 250–280°C. There is a trend towards decreasing the ratio of 100Mg/(Mg + Fetot + Mn) away from the high strain zone of the Mubarak shear belt. Integrated strain and temperature estimates indicate that the simple shear (non-coaxial) components of deformation played a significant role in formation and exhumation of the Mubarak shear belt during the accumulation of finite strain and consequently during progressive transpression and thrusting.  相似文献   

13.
During Hercynian low-pressure/high-temperature metamorphism of Palaeozoic metasediments of the southern Aspromonte (Calabria), a sequence of metamorphic zones at chlorite, biotite, garnet, staurolite–andalusite and sillimanite–muscovite grade was developed. These metasediments represent the upper part of an exposed tilted cross-section through the Hercynian continental crust. P–T information on their metamorphism supplements that already known for the granulite facies lower crust of the section and allows reconstruction of the thermal conditions in the Calabrian crust during the late Hercynian orogenic event. Three foliations formed during deformation of the metasediments. The peak metamorphic assemblages grew mainly syntectonically (S2) during regional metamorphism, but mineral growth outlasted the deformation. This is in accordance with the textural relationships found in the lower part of the same crustal section exposed in the northern Serre. Pressure conditions recorded for the base of the upper crustal metasediments are c. 2.5 kbar and estimated temperatures range from <350 °C in the chlorite zone, increasing to 500 °C in the lower garnet zone, and reaching 620 °C in the sillimanite–muscovite zone. Geothermal gradients for the peak of metamorphism indicate a much higher value for the upper crust (c. 60 °C km?1) than for the granulite facies lower crust (30–35 °C km?1). The small temperature difference between the base of the upper crust (620 °C at c. 2.5 kbar) and the top of the lower crust (690 °C at 5.5 kbar) can be explained by intrusions of granitoids into the middle crust, which, in this crustal section, took place synchronously with the regional metamorphism at c. 310– 295 Ma. It is concluded that the thermal structure of the Calabrian crust during the Hercynian orogeny – as it is reflected by peak metamorphic assemblages – was mainly controlled by advective heat input through magmatic intrusions into all levels of the crust.  相似文献   

14.
张进江  戚国伟  郭磊  刘江 《岩石学报》2009,25(3):609-620
内蒙古大青山呼和浩特段北侧发育3条走向北东东、指向北西的逆冲断层,并与被其分割的3个逆冲席体及一个原地系构成大青山逆冲推覆体系。逆冲断层上盘底部发育较深层次的糜棱岩,下盘顶部多发育低温的千糜岩。本研究在构造地质调查基础上,结合宏-微观岩石矿物学分析,采用40Ar-39Ar定年对该逆冲体系的活动时间进行约束。逆冲断层带内3个千糜岩绢云母40Ar-39Ar年龄范围为120~119Ma,另一样品给出了120Ma的概率统计峰值年龄。千糜岩为低温同变形变质产物,细粒绢云母为同变形新生矿物,其40Ar-39Ar年龄可代表变形年龄。侵位在断层内弱变形的花岗闪长岩为同构造晚期侵位,角闪石40Ar-39Ar年龄限定其冷却时间下限为121Ma,概率统计峰值年龄为119Ma。逆冲断层上盘底部发育较高温的糜棱岩,而低温千糜岩的形成时间应属于变形后期。因此,120Ma至119Ma期间,大青山逆冲推覆体系的逆冲作用应已是处于变形晚期。  相似文献   

15.
《Geodinamica Acta》1999,12(1):25-42
The Early Eocene to Early Oligocene tectonic history of the Menderes Massif involves a major regional Barrovian-type metamorphism (M1, Main Menderes Metamorphism, MMM), present only in the Palaeozoic-Cenozoic metasediments (the so-called “cover” of the massif), which reached upper amphibolite faciès with local anatectic melting at structurally lower levels of the cover rocks and gradually decreased southwards to greenschist facies at structurally higher levels. It is not present in the augen gneisses (the so called “core” of the massif), which are interpreted as a peraluminous granite deformed within a Tertiary extensional shear zone, and lie structurally below the metasediments. A pronounced regional (S1) foliation and approximately N-S trending mineral lineation (L1) associated with first-order folding (F1) were produced during D1 deformation coeval with the MMM. The S1 foliation was later refolded during D2 by approximately WNW-ESE trending F2 folds associated with S2 crenulation cleavage. It is now commonly believed that the MMM is the product of latest Palaeogene collision across Neo-Tethys and the consequent internal imbrication of the Menderes Massif area within a broad zone along the base of the Lycian Nappes during the Early Eocene-Early Oligocene time interval. However, the meso- and micro-structures produced during D1 deformation, the asymmetry and change in the intensity and geometry of the F2 folds towards the Lycian thrust front all indicate an unambiguous non-coaxial deformation and a shear sense of upper levels moving north. This shear sense is incompatible with a long-standing assumption that the Lycian Nappes were transported southwards over the massif causing its metamorphism. It is suggested here that the MMM results from burial related to the initial collision across the Neo-Tethys and Tefenni nappe emplacement, whereas associated D1 deformation and later D2 deformation are probably related to the northward backthrusting of the Lycian nappes.  相似文献   

16.
The Adula Nappe in the Central Alps comprises pre-Mesozoic basement and minor Mesozoic sediments, overprinted by Paleogene eclogite-facies metamorphism. Peak pressures increase southward from ca. 1.2 GPa to values over 3 GPa, which is interpreted to reflect exhumation from a south-dipping subduction zone. The over- and underlying nappes experienced much lower Alpine pressures. To the north, the Adula Nappe ends in a lobe surrounded by Mesozoic metasediments. The external shape of the lobe is simple but the internal structure highly complicated. The frontal boundary of the nappe represents a discontinuity in metamorphic peak temperatures, between higher T in the Adula Nappe and lower T outside. A shear zone with steeply dipping foliation and shallowly-plunging, WSW-ENE oriented, i.e. orogen-parallel stretching lineation overprinted the northernmost part of the Adula Nappe and the adjacent Mesozoic metasediments (Vals-Scaradra Shear Zone). It formed during the local Leis deformation phase. The shear sense in the Vals-Scaradra Shear Zone changes along strike; from sinistral in the W to dextral in the E. Quartz textures also vary along strike. In the W, they indicate sinistral shearing with a component of coaxial (flattening) strain. A texture from the middle part of the shear zone is symmetric and indicates coaxial flattening. Textures from the eastern part show strong, single c-axis maxima indicating dextral shearing. These relations reflect complex flow within the Adula Nappe during a late stage of its exhumation. The structures and reconstructed flow field indicate that the Adula basement protruded upward and northward into the surrounding metasediments, spread laterally, and expelled the metasediments in front towards west and east.  相似文献   

17.
Abstract

Four ductile shear zones were sampled in the autochthonous Thaya basement and the Upper Bíte? nappe (Moravian unit) at the Eastern margin of the Bohemian massif. In both studied units, the tectono-metamorphic evolution and the chemical mass transfer are different. Two deformational events are recognised: the first deformation stage under amphibolite facies conditions is overprinted by a second event under greenschist facies conditions.

The first deformation affected the western margin of the Thaya basement and the whole Bíte? nappe: microstructures are characterised by dynamic recrystallisation of feldspars and quartz, and occurrence of myrmekites and grain-boundary migration of quartz. None or weak chemical mass transfer is related to this medium to high temperature deformation. This deformation corresponds to the thrusting of Moldanubdian units on the Brunovistulian units (Moravian nappes and autochthonous Thaya basement).

The second deformation generated shear zones in the until then preserved Thaya basement and reactivated both shear zones of the western margin of the Thaya basement and those of the Bíte? nappe. This deformation is retrograde and mainly associated with chemical mass transfer: a decrease of CaO, FeO, FeO/Fe2O3 and an increase of MgO, K2O and H2O. These chemical changes are related to greenschist metamorphic reactions leading to the destabilisation of feldspars and the crystallisation of white micas and Ca-silicates. The large chemical mass transfer is associated with the circulation of a large volume of fluids. A model of progressive fluid circulation correlated with Variscan prograde and retrograde metamorphism during the collision of Moldanubian and Brunovistulian units is proposed.  相似文献   

18.
The Veporic basement and its Permian-Mesozoic cover experienced medium-pressure, collision-related metamorphism during the Cretaceous. Geothermobarometric calculations of Alpine mineral assemblages indicate peak conditions of 8–12 kbar and 550–600°C in the deepest-exposed basement, and up to 8 kbar and 450–500°C in the Permian metasediments. After having reached the metamorphic peak conditions (at around 110 Ma, 40Ar/39Ar on amphiboles), the thermally softened Veporic unit was exhumed probably due to the underplating of a buoyant Tatric-Fatric crust. Exhumation was triggered by extensional denudation of former upper-crustal thrust units, overlying the Veporic unit. Unroofing was accomplished due to orogenparallel, top-to-east extension along low-angle, ductile normal shear zones. The area collapsed and rapidly cooled at 90-80 Ma (40Ar/39Ar on micas). As revealed by the structural record, the doming and tectonic exhumation of the Veporic core occurred in an overall contractional regime and was followed by additional Late Cretaceous—Early Tertiary shortening events.  相似文献   

19.
Abstract

Biostratigraphical data using larger foraminifera and planktonic foraminifera permitted us to establish the correlation between shallow platform sediments rich in larger foraminifera (Montsec and Serres Marginals thrust sheets) and deeper ones containing planktonic foraminifera (Boixols thrust sheet).

Consequently, the Santa Fe limestones containing Ovalveolina-Praealveolinaassemblage represent the Cenomanian. Early Turonian ( ‘IT~ archaeocretacea and P. helvetica zones) exist in both, Montsec and Boixols thrust sheets and it is constituted by Pithonella limestones. Late Turonian (M. schneegansi zone) is only present in Boixols thrust sheet (Reguard Fm.), the Montsec thrust sheet having an erosive hiatus.

Late Coniacian-Early Santonian (D. Concavata zone) is represented in the Montsec thrust sheet (Cova Limestones) and in the eastern part of the Boixols thrust sheet (St. Corneli Fm.) by two differents facies giving two different microfaunal assemblages; the firts one, characterized by Ophtalmidiidae s.l indicate a restricted lagoonal environment while the second one, characterized by diverses species of complex agglutinated, Fabulariidae, Meandropsinidae and Rotaliidae, represents an open shallow platform. In the Boixols thrust sheet (Anseroles Fm.) dominate the planktonic foraminifera and small benthic.

In the late Santonian (D. asyrnetrica zone) the sea reached as far as Serres Marginales thrust sheet where sediments (Tragó de Noguera unit) are terrigenous and deposited in a very shallow platform. In the Montsec thrust sheet (Montsec marls) the larger foraminifera indicate a platform deeper than that of the Serres Marginals thrust sheet. In the Boixols thrust sheet the sediments are deposited in an outer platform (Herbasavina Fm.) or turbiditic basin (Mascarell Mb.).

During Campanian times the transgresion reaches the maximum. In the Serres Marginals sediments are deposited in a restricted shallow environment rich in Meandropsinidae (Serres Limestones). In the Montsec thrust sheet they are deposited in a platform with patch reefs and shoals (Terradets limestones) and in the Boixols one in an outer platform, talus and/or basin.

During Early Maastrichtian times (C. falsostuarti zone) terrigenous materials arrived in the basin, the rate of sedimentation increased outstripping the subsidence rate and the retreat of the sea to the north. Late Maastrichtian (C. gansseri zone) is only present in the Boixols thrust sheet.  相似文献   

20.
Structural and 40Ar/39Ar data from the mylonitic rocks of the North Dabashan zone (NDZ) document kinematic and tectonothermal characteristics of the Mesozoic collisional and intra-continental orogenesis in the southern part of the Qinling orogenic belt. The NDZ underwent two deformational phases during the Mesozoic period. The earlier one is characterized by top-to-the-SW thrust ductile shearing along a NW-trending shear zone (DSZ-1), while the later one is featured by dextral strike-slip ductile shearing along another NNW-trending shear zone (DSZ-2). The timing of the two deformation events have been constrained to be 245–189 Ma and 178–143 Ma respectively, by using mica 40Ar/39Ar geochronology. It is proposed that the earlier deformation event was associated with the Middle Triassic–Early Jurassic collision between the North and South China Blocks, which generated the initial framework of the NDZ; and the later one was related to the Middle Jurassic to Early Cretaceous intra-continental orogeny in East Asia, which caused a significant eastward extrusion of the South Qinling and led to the formation of the SW-convex Dabashan foreland orocline. The distinguishing between these two deformation events sheds a new insight into the Mesozoic tectonic evolution of the Qinling orogenic belt.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号