共查询到20条相似文献，搜索用时 31 毫秒
1.
2.
Suthan Suthersan John Horst Mark Klemmer Don Malone 《Ground Water Monitoring & Remediation》2012,32(3):34-40
The remediation industry has witnessed multiple innovations arising from a greater understanding of the physical, chemical, and biological processes that control the fate and transport of chemicals in the subsurface environment. In addition, increasing emphasis is being placed on remediation solutions that are greener, simpler, and more resource efficient. The positive impacts that can be derived from this emphasis include reduced energy consumption, reduced waste emissions, and lower costs. Temperature‐activated auto‐decomposition reactions represent a potentially underutilized option for the in situ remediation of certain organic contaminants, and an option that can be both highly effective and greener than other available technologies. 相似文献
3.
Pump‐and‐Treat Groundwater Remediation Using Chlorine/Ultraviolet Advanced Oxidation Processes 
下载免费PDF全文
下载免费PDF全文 Comparative studies of the use of chlorine/ultraviolet (Cl2/UV) and hydrogen peroxide/ultraviolet (H2O2/UV) Advanced oxidation processes (AOPs) to remove trichloroethylene (TCE) from groundwater in a pump‐and‐treat application were conducted for the first time at the full‐scale operational level at two water treatment facilities in Northern California. In these studies, aqueous chlorine replaced hydrogen peroxide in the AOP treatment step, where the oxidant is exposed to UV light to produce highly reactive radical species that degrade groundwater contaminants. TCE removal rates as a function of initial chlorine dose and pH were then determined. At the site where the natural pH of the water was 7.1, TCE was removed (to a concentration of less than 0.5 µg/L) for nearly every chlorine dose point tested, and pH adjustment slightly enhanced the treatment process at this facility. The second site had a high natural pH of 7.7, and here, TCE was not completely removed for any chlorine dose up to 5.7 mg/L, although TCE removal did increase when the chlorine dose increased between 0.9 and 3.6 mg/L. Residual TCE remaining in the water post‐Cl2/UV was readily removed using active carbon filtration, which is part of the overall treatment train at this facility. These studies also verified that Cl2/UV AOP did not interfere with the photolysis of N‐nitrosodimethylamine or result in an effluent acutely toxic toward Ceriodaphnia dubia. Comparative economic analysis revealed that the chemical costs associated with Cl2/UV AOP were 25 to 50% of the costs associated with in place H2O2/UV AOP treatment. 相似文献
4.
5.
6.
Mitchell R. Olson Thomas C. Sale Charles D. Shackelford Christopher Bozzini Jessica Skeean 《Ground Water Monitoring & Remediation》2012,32(3):63-74
ZVI‐Clay is an emerging remediation approach that combines zero‐valent iron (ZVI)‐mediated degradation and in situ stabilization of chlorinated solvents. Through use of in situ soil mixing to deliver reagents, reagent‐contaminant contact issues associated with natural subsurface heterogeneity are overcome. This article describes implementation, treatment performance, and reaction kinetics during the first year after application of the ZVI‐Clay remediation approach at Marine Corps Base Camp Lejeune, North Carolina. Primary contaminants included trichloroethylene, 1,1,2,2‐tetrachloroethane, and related natural degradation products. For the field application, 22,900 m3 of soils were treated to an average depth of 7.6 m with 2% ZVI and 3% sodium bentonite (dry weight basis). Performance monitoring included analysis of soil and water samples. After 1 year, total concentrations of chlorinated volatile organic compounds (CVOCs) in soil samples were decreased by site‐wide average and median values of 97% and >99%, respectively. Total CVOC concentrations in groundwater were reduced by average and median values of 81% and >99%, respectively. In several of the soil and groundwater monitoring locations, reductions in total CVOC concentrations of greater than 99.9% were apparent. Further reduction in concentrations of chlorinated solvents is expected with time. Pre‐ and post‐mixing average hydraulic conductivity values were 1.7 × 10?5 and 5.2 × 10?8 m/s, respectively, indicating a reduction of about 2.5 orders of magnitude. By achieving simultaneous contaminant mass depletion and hydraulic conductivity reduction, contaminant flux reductions of several orders of magnitude are predicted. 相似文献
7.
8.
9.
10.
Wilson S. Clayton 《Ground Water Monitoring & Remediation》2017,37(4):23-33
Decision methods applied in the remediation industry were evaluated using a survey of industry practitioners, in order to assess the relative roles of quantitative decision analysis and gut intuition. Principals from the disciplines of behavioral economics and decision theory were used as a framework to evaluate remediation decision behaviors revealed by the survey. The survey was completed by 118 respondents representing academia, consultants, clients, and others. Survey questions focused on perceptions and experiences related to inputs to decisions and decision processes, as well as remediation goal setting and outcomes. The most common remediation objective cited was short‐term interim measures and the least common was no further action (NFA) with clean closure. NFA was also sparingly achieved: 33% of respondents reported zero NFA closures in their career, and an overall 15% to 20% NFA closure rate was reported among more experienced respondents. Data inputs were ranked most important to decisions, while the decision process itself was ranked lowest. Intuition‐based decision methods such as asking for a trusted opinion, rules of thumb, and meetings were all used at last twice as often as decision analysis such as discounted cash flow or probabilistic analysis. Analysis of survey responses showed that cognitive biases, including overconfidence effect and intuition bias, are present to some extent in remediation decision‐making. Practitioners are advised to be mindful of the decision‐making processes they apply, and to incorporate elements of both intuition and decision analysis, as appropriate to the decisions being made. 相似文献
11.
12.
13.
Thermal methods are promising for remediating fractured geologic media contaminated with volatile organic compounds, and the success of this process depends on the coupled heat transfer, multiphase flow, and thermodynamics. This study analyzed field‐scale removal of trichloroethylene (TCE) and heat transfer behavior in boiling fractured geologic media using the multiple interacting continua method. This method can resolve local gradients in the matrix and is less computationally demanding than alternative methods like discrete fracture‐matrix models. A 2D axisymmetric model was used to simulate a single element of symmetry in a repeated pattern of extraction wells inside a large heated zone and evaluate effects of parameter sensitivity on contaminant recovery. The results showed that the removal of TCE increased with matrix permeability, and the removal rate was more sensitive to matrix permeability than any other parameter. Increasing fracture density promoted TCE removal, especially when the matrix permeability was low (e.g., <10?17 m2). A 3D model was used to simulate an entire treatment zone and the surrounding groundwater in fractured material, with the interaction between them being considered. Boiling was initiated in the center of the upper part of the heated region and expanded toward the boundaries. This boiling process resulted in a large increase in the TCE removal rate and spread of TCE to the vadose zone and the peripheries of the heated zone. The incorporation of extraction wells helped control the contaminant from migrating to far regions. After 22 d, more than 99.3% of TCE mass was recovered in the simulation. 相似文献
14.
Toxic and carcinogenic effects of arsenic in drinking water continue to impact people throughout the world and arsenic remains common in groundwater at cleanup sites and in areas with natural sources. Advances in groundwater remediation are needed to attain the low concentrations that are protective of human health and the environment. In this article, we present the successful use of a permeable reactive barrier (PRB) utilizing sulfate reduction coupled with zero‐valent iron (ZVI) to remediate the leading edge of a dissolved arsenic plume in a wetland area near Tacoma, Washington. A commercially available product (EHC‐M®, Adventus Americas Inc., Freeport, Illinois) that contains ZVI, organic carbon substrate, and sulfate was injected into a reducing, low‐seepage‐velocity aquifer elevated in dissolved arsenic and iron from a nearby, slag‐containing landfill. Removal effectiveness was strongly correlated with sulfate concentration, and was coincident with temporary redox potential (Eh) reductions, consistent with arsenic removal by iron sulfide precipitation. The PRB demonstrates that induced sulfate reduction and ZVI are capable of attaining a regulatory limit of 5 µg/L total arsenic, capturing of 97% of the arsenic entering the PRB, and sustaining decreased arsenic concentrations for approximately 2 years, suggesting that the technology is appropriate for consideration at other sites with similar hydrogeochemical conditions. The results indicate the importance of delivery and longevity of minimum sulfate concentrations and of maintaining sufficient dissolved organic carbon and/or microscale ZVI to precipitate FeS, a precursor phase to arsenic‐bearing pyrite that may provide a stable, long‐term sink for arsenic. 相似文献
15.
16.
Recently, increased industrial and agriculture activities have resulted in toxic metal ions, which has increased public concern about the quality of surface and groundwater. Various types of physical, biological, and chemical approaches have been developed to remove surface and groundwater metal ions contaminants. Among these practices, zero‐valent iron (ZVI) is the most studied reactive material for environmental clean‐up over the last two decade and so. Although ZVI can remove the contaminants even more efficiently than any other reactive materials. However, low reactivity due to its intrinsic passive layer, narrow working pH, and the loss of hydraulic conductivity due to the precipitation of metal hydroxides and metal carbonates limits its wide‐scale application. The aim of this work is to document properties, synthesis, and reaction mechanism of ZVI for the treatment of metal ions from the surface and groundwater in recent 10 years (2008–2018). So far, different modified techniques such as conjugation with support, bimetal alloying, weak magnetic field, and ZVI/oxidant coupling system have been developed to facilitate the use of ZVI in various environmental remediation scenarios. However, some challenges still remain to be addressed. Therefore, development and research in this field are needed to overcome or mitigate these limitations. 相似文献
17.
18.
19.
Craig E. Divine Tracy Roth Michelle Crimi Abrahm C. DiMarco Matt Spurlin Jeff Gillow Gastón Leone 《Ground Water Monitoring & Remediation》2018,38(1):56-65
A new in‐situ remediation concept termed a Horizontal Reactive Media Treatment Well (HRX Well®) is presented that utilizes horizontal wells filled with reactive media to passively treat contaminated groundwater in‐situ. The approach involves the use of large‐diameter directionally drilled horizontal wells filled with granular reactive media generally installed parallel to the direction of groundwater flow. The design leverages natural “flow‐focusing” behavior induced by the high in‐well hydraulic conductivity of the reactive media relative to the aquifer hydraulic conductivity to passively capture and treat proportionally large volumes of groundwater within the well. Clean groundwater then exits the horizontal well along its downgradient sections. Many different types of solid granular reactive media are already available (e.g., zero valent iron, activated carbon, ion exchange resins, zeolite, apatite, chitin); therefore, this concept could be used to address a wide range of contaminants. Three‐dimensional flow and transport simulations were completed to assess the general hydraulic performance, capture zones, residence times, effects of aquifer heterogeneity, and treatment effectiveness of the concept. The results demonstrate that capture and treatment widths of up to tens of feet can be achieved for many aquifer settings, and that reductions in downgradient concentrations and contaminant mass flux are nearly immediate. For a representative example, the predicted treatment zone width for the HRX Well is approximately 27 to 44 feet, and contaminant concentrations immediately downgradient of the HRX Well decreased an order of magnitude within 10 days. A series of laboratory‐scale physical tests (i.e., tank tests) were completed that further demonstrate the concept and confirm model prediction performance. For example, the breakthrough time, peak concentration and total mass recovery of methylene blue (reactive tracer) was about 2, 35, and 20 times (respectively) less than chloride (conservative tracer) at the outlet of the tank‐scale HRX Well. 相似文献
20.
Robert E. Hinchee Paul R. Dahlen Paul C. Johnson David R. Burris 《Ground Water Monitoring & Remediation》2018,38(2):40-48
1,4‐Dioxane is totally miscible in water, sequestering in vadose pore water that can serve as a source of long‐term groundwater contamination. Although some 1,4‐dioxane is removed by conventional soil vapor extraction (SVE), remediation is typically inefficient. SVE efficiency is hindered by low Henry’s Law constants at ambient temperature and redistribution to vadose pore water if SVE wells pull 1,4‐dioxane vapors across previously clean soil. It was hypothesized that heated air injection and more focused SVE extraction (“Enhanced SVE” or XSVE) could increase the efficiency of 1,4‐dioxane vadose treatment, and this new process was tested at former McClellan Air Force Base, CA. The XSVE system had four peripheral heated air injection wells surrounding a 6.1 m × 6.1 m × 9.1 m deep treatment zone with a central vapor extraction well. After 14 months of operation, soil temperatures reached as high as ~90 °C near the injection wells and the treatment zone was flushed with ~20,000 pore volumes of injected air. Post‐treatment sampling results showed reductions of ~94% in 1,4‐dioxane and ~45% in soil moisture. Given the simplicity of the remediation system components and the promising demonstration test results, XSVE has the potential to be a cost‐effective remediation option for vadose zone soil containing 1,4‐dioxane. 相似文献