共查询到20条相似文献，搜索用时 328 毫秒
1.
On rimmed shelves of Bahamian-type, characterized by chlorozoan associations and typical of tropical seas, carbonate production keeps pace with normal sea-level rise except when rapid rise or drastic environmental changes occurs. On the other hand, open temperate carbonate shelves are characterized by low carbonate production of the foramol association (molluscs, benthic foraminifera, bryozoans, coralline algae, etc.) and generally show seaward relict sediments, because carbonate production cannot keep pace with normal rate of sea-level change.
Several examples of recent drowning foramol carbonate platforms (e.g., large areas of the Mediterranean Sea, eastern-northeastern Yucatan Shelf) as well as analogous ancient drowned foramol-type carbonate platforms (e.g., early to middle Miocene of the Southern Apennines; Miami Terrace) may support the idea that the drowning of many ancient carbonate platforms has been favoured by their biogenic (foramol sensu lato) constitution. Because of their typically low rate of growth, foramol carbonate platforms are fated to be drowned even if the sea-level rise is one with which the normal growth of chlorozoan platforms can keep pace. Similar conditions may also occur in tropical areas where variations in environmental conditions, such as the presence of cold waters, changes in salinity and increased nutrients, preclude the development of chlorozoan associations. 相似文献
2.
Elsa Jullien Francis Grousset Bruno Malaiz Josette Duprat Maria Fernanda Sanchez-Goni Frdrique Eynaud Karine Charlier Ralph Schneider Aloys Bory Viviane Bout Jose Abel Flores 《Quaternary Research》2007,68(3):379-386
It has been proposed that tropical events could have participated in the triggering of the classic, high-latitude, iceberg-discharge Heinrich events (HE). We explore low-latitude Heinrich events equivalents at high resolution, in a piston core recovered from the tropical north-western African margin. They are characterized by an increase of total dust, lacustrine diatoms and fibrous lacustrine clay minerals. Thus, low-latitude events clearly reflect severe aridity events that occurred over Africa at the Saharan latitudes, probably induced by southward shifts of the Inter Tropical Convergence Zone. At a first approximation, it seems that there is more likely synchronicity between the high-latitude Heinrich Events (HEs) and low-latitude events (LLE), rather than asynchronous behaviours. 相似文献
3.
The Neoproterozoic Katangan R.A.T. (“Roches Argilo-Talqueuses”) Subgroup is a sedimentary sequence composed of red massive to irregularly bedded terrigenous-dolomitic rocks occurring at the base of the Katangan succession in Congo. Red R.A.T. is rarely exposed in a continuous section because it was affected by a major layer-parallel décollement during the Lufilian thrusting. However, in a number of thrust sheets, Red R.A.T. is in conformable sedimentary contact with Grey R.A.T which forms the base of the Mines Subgroup. Apart from the colour difference reflecting distinct depositional redox conditions, lithological, petrographical and geochemical features of Red and Grey R.A.T. are similar. A continuous sedimentary transition between these two lithological units is shown by the occurrence of variegated to yellowish R.A.T. The D. Strat. “Dolomies Stratifiées” formation of the Mines Subgroup conformably overlies the Grey R.A.T. In addition, a transitional gradation between Grey R.A.T. and D. Strat. occurs in most Cu–Co mines in Katanga and is marked by interbedding of Grey R.A.T.-type and D. Strat.-type layers or by a progressive petrographic and lithologic transition from R.A.T. to D. Strat. Thus, there is an unquestionable sedimentary transition between Grey R.A.T. and D. Strat. and between Grey R.A.T. and Red R.A.T.The R.A.T. Subgroup stratigraphically underlies the Mines Subgroup and therefore R.A.T. cannot be comprised of syn-orogenic sediments deposited upon the Kundelungu (formerly “Upper Kundelungu”) Group as suggested by Wendorff (2000). As a consequence, the Grey R.A.T. Cu–Co mineralisation definitely is part of the Mines Subgroup Lower Orebody, and does not represent a distinct generation of stratiform Cu–Co sulphide mineralisation younger than the Roan orebodies. 相似文献
4.
5.
The character of porcelain wares made by Nicholas Crisp early and late in his career was assessed using microchemical and petrographic data for sherds excavated from the sites of the factories he operated at Vauxhall and Bovey Tracey. The results indicate that, over time, Crisp increasingly made use of diverse types of pastes as he struggled to produce a commercially viable line of porcelain. Based on the analysis of a limited number of samples, he appears to have largely restricted himself at Vauxhall to using soapstone (Mg‐rich)‐ and flint‐glass (Pb‐rich) frit‐bearing pastes that varied in the amount of calcite they contained. He also experimented with Mg+Pb‐rich pastes at Bovey Tracey, but included a novel ingredient (barite) and varied the proportion of other minor constituents (e.g., bone ash), apparently in an effort to resolve some of the firing problems that plagued him at Vauxhall. In addition, Crisp appears to have produced bone ash (phosphatic) porcelain at Bovey Tracey, and, in collaboration with William Cookworthy, the proprietor of the Plymouth factory, fired a range of true porcelain (Si+Al‐rich) pastes. Bulk compositional data indicate that Crisp's diopside‐bearing Mg+Pb‐rich wares were derived from pastes containing talc and calcite rather than dolomite. The mineralogy of these and some contemporary magnesian/plombian porcelains are interpreted using the SiO2‐CaO‐MgO phase diagram. This diagram shows that these wares can form and preserve diopside (Ca‐Mg silicate) given suitable bulk CaO contents and kiln‐firing temperatures. Phosphatic sherds from Bovey Tracey are compositionally distinct (lower SiO2 and higher Al2O3 and bone‐ash components) from a single bone‐ash sample from Vauxhall, indicating that Crisp experimented with novel bone‐ash pastes, and was not positively influenced by the Vauxhall phosphatic recipe, if indeed one existed. True porcelains from Bovey Tracey have more extreme SiO2/Al2O3 ratios (= 2.0 [two sherds]; 4.5 [one sherd]) than their Plymouth/Bristol counterparts (SiO2/Al2O3 = 2.3–3.0). Collectively, the analytical data underscore the experimental—and ultimately unsuccessful—character of the diverse wares produced by Nicholas Crisp. © 2000 John Wiley & Sons, Inc. 相似文献
6.
7.
Ilmenite is one of the common kimberlitic indicator minerals recovered during diamond exploration, and its distinction from non-kimberlitic rock types is important. This is particularly true for regions where these minerals are present in relatively low abundance, and they are the dominant kimberlitic indicator mineral recovered. Difficulty in visually differentiating kimberlitic from non-kimberlitic ilmenite in exploration concentrates is also an issue, and distinguishing kimberlitic ilmenite from those derive from other similar rocks, such as ultramafic lamprophyres, is practically impossible. Ilmenite is also the indicator mineral whose compositional variety has the most potential to resolve provenance issues related to mineral dispersions with contributions from multiple kimberlite sources.
Various published data sets from selected kimberlitic (including kimberlites, lamproites, and various ultramafic lamprophyres) and non-kimberlitic rock types have been compiled and evaluated in terms of their major element compositions. Compositional fields and bounding reference lines for ilmenites derived from kimberlites (sensu stricto), ultramafic lamprophyres, and other non-kimberlitic rock types have been defined primarily on MgO–TiO2 graphs as well as MgO–Cr2O3 relationships. 相似文献
8.
9.
10.
We carried out paleoseismological analyses in Norcia, one of the oldest town of central Italy. Four trenches were dug in late Pleistocene–Holocene deposits, across an unmapped, antithetic splay of the Norcia Fault System. The investigated fault runs through the recent settlement of the town, brushing against the middle-age city walls. We found evidence of repeated surface ruptures in the past 20 ky, the last one dated to a period fitting with the 1703 AD, catastrophic earthquake (M = 6.8). Our data (i) show definitively the late Pleistocene–Holocene activity of the Norcia Fault System, (ii) strengthen the historical accounts describing surface ruptures during the 1703 event in Norcia, (iii) cast light on the seismogenic behavior of the 70-km-long fault system between L'Aquila and Norcia (central Italy) and (iv) predict the occurrence of normal surface faulting inside the municipality of Norcia during future M ≥ 6 earthquakes. 相似文献
11.
12.
13.
Maria Di Rosa Chiara Frassi Michele Marroni Francesca Meneghini Luca Pandolfi 《地学学报》2020,32(1):34-43
Despite the important role played by the Sardinia‐Corsica block in the reconstruction of the Western Mediterranean geodynamics, the extent of involvement of the “Autochthonous” European margin exposed in Corsica (France) (i.e., Hercynian Corsica) in the Alpine orogeny remains uncertain. Stratigraphic and sedimentological studies in the post‐Variscan deposits on the Hercynian Corsica are scarce and even scarcer are the structural and metamorphic constraints. To face these uncertainties, we present new stratigraphic, structural and metamorphic data from the area of Razzo Bianco, Central Corsica, where a complete sequence belonging to the European continental margin is exposed. Field and structural investigations demonstrate that the sequence represents the easternmost edge of the downgoing European plate. Metamorphic studies on the Eocene deposits indicate that the margin was buried at depth up to blueschist facies conditions and, subsequently, it was progressively exhumed mainly through the activation of oblique top‐to‐the NW shear zones. 相似文献
14.
15.
J. H. McBride A. J. M. Pugin W. J. Nelson T. H. Larson S. L. Sargent J. A. Devera F. B. Denny E. W. Woolery 《Tectonophysics》2004,383(3-4):243-244
16.
We thank Karato for his interest in our recent paper in Tectonophysics [Xu, Z.Q., Wang, Q., Ji, S.C.. Chen, J., Zeng, L.S., Yang, J.S., Chen, F.Y., Liang, F.H., Wenk, H.R., 2006. Petrofabrics and seismic properties of garnet peridotite from the UHP Sulu terrane (China): Implications for olivine deformation mechanism in a cold and dry subducting continental slab. Tectonophysics 421, 111–127]. However, Karato is incorrect to take water or water-related species (herein referred to generically as ‘water’) as an almost unique cause for any olivine fabric transition in nature no matter what geological conditions are. In this Reply, we will first give a succinct introduction to the context of the ongoing debate, and then provide some additional arguments in favour of our conclusion that “the olivine C-type fabric of the Zhimafang garnet-bearing peridotites was formed under the conditions of high pressure, low temperature and low water content during the subduction of cold and dry supracrustal rocks of the Yangtze plate”. The map of olivine slip systems as a function of differential stress and water content, drawn by Karato and coworkers, cannot be reliably extrapolated to Earth’s interior until relevant scaling laws have been established. The role of high water content on the fabric transitions is more likely to modify recrystallization kinetics than to switch the dominant slip systems. 相似文献
17.
18.
19.