首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
In this work, we explore by means of analogue models how different basin-bounding fault geometries and thickness of a viscous layer within the otherwise brittle pre-rift sequence influence the deformation and sedimentary patterns of basins related to extension. The experimental device consists of a rigid wooden basement in the footwall to simulate a listric fault. The hangingwall consists of a sequence of pre-rift deposits, including the shallow interlayered viscous layer, and a syn-rift sequence deposited at constant intervals during extension. Two different geometries exist of listric normal faults, dip at 30 and 60° at surface. This imposes different geometries in the hangingwall anticlines and their associated sedimentary basins. A strong contrast exists between models with and without a viscous layer. With a viscous décollement, areas near the main basement fault show a wide normal drag and the hangingwall basin is gently synclinal, with dips in the fault side progressively shallowing upwards. A secondary roll-over structure appears in some of the models. Other structures are: (1) reverse faults dipping steeply towards the main fault, (2) antithetic faults in the footwall, appearing only in models with the 30° dipping fault and silicone-level thicknesses of 1 and 1.5 cm and (3) listric normal faults linked to the termination of the detachment level opposite to the main fault, with significant thickness changes in the syn-tectonic units. The experiments demonstrate the importance of detachment level in conditioning the geometry of extensional sedimentary basins and the possibility of syncline basin geometries associated with a main basement fault. Comparison with several basins with half-graben geometries containing a mid-level décollement supports the experimental results and constrains their interpretation.  相似文献   

2.
High‐resolution seismic imaging and coring in Lago Fagnano, located along a plate boundary in Tierra del Fuego, have revealed a dated sequence of Holocene mass‐wasting events. These structures are interpreted as sediment mobilizations resulting from loading of the slope‐adjacent lake floor during mass‐flow deposition. More than 19 mass‐flow deposits have been identified, combining results from 800 km of gridded seismic profiles used to site sediment cores. Successions of up to 6‐m thick mass‐flow deposits, pond atop the basin floor and spread eastward and westward following the main axis of the eastern sub‐basin of Lago Fagnano. We developed an age model, on the basis of information from previous studies and from new AMS‐14C ages on cored sediments, which allows us to establish a well‐constrained chronologic mass‐wasting event‐catalogue covering the last ～12 000 years. Simultaneously triggered, basin‐wide lateral slope failure and the formation of multiple debris flow and postulated megaturbidite deposits are interpreted as the fingerprint of paleo‐seismic activity along the Magallanes‐Fagnano transform fault that runs along the entire lake basin. The slope failures and megaturbidites are interpreted as recording large earthquakes occurring along the transform fault since the early Holocene. The results from this study provide new data about the frequency and possible magnitude of Holocene earthquakes in Tierra del Fuego, which can be applied in the context of seismic hazard assessment in southernmost Patagonia.  相似文献   

3.
We have collected and re-examined macroseismic information for large Central American earthquakes since the beginning of the period of instrumental recording about one hundred years ago, and combined this with a reassessment of early instrumental information to produce a catalogue of 51 events that, we believe includes ail those with magnitudes ( Ms ) greater than 7.0. We have reassessed surface-wave magnitudes by consulting station bulletins and we have derived a correction that gives an equivalent Ms for events of intermediate depth. We have also developed a regional relationship between Ms and seismic moment, which enables us to estimate the seismic slip rate across the Middle American Trench. Our best estimates give an average slip rate several times smaller than suggested convergence rates, but with the seismic slip in the central segment of the trench almost an order of magnitude smaller than that in the segments on either side. The low seismic slip rate may indicate aseismic crustal deformation  相似文献   

4.
This paper examines the millennial-scale evolution of the longitude profile of Nahal (Wadi) Zin in the Dead Sea basin in the northern Arava valley, Israel. Nahal Zin has incised ~ 50 m into relatively soft late Pleistocene Lake Lisan sediments. Incision was forced by the regressive (> 10 km) lake level fall of a total of > 200 m of Lake Lisan from its highest stand at ~ 25 ka and exposure of the lake-floor sediments to fluvial and coastal processes. Alluvial cut terraces of the incising channel are well preserved along the 17.5 km of the lowermost reach of Nahal Zin. At its outlet into the Dead Sea basin, Nahal Zin deposited a Holocene alluvial fan at the base of a 10–80 m high escarpment in unconsolidated sediments. The escarpment is associated with the Amazyahu fault, which forms the southern structural boundary of the present Dead Sea basin. Geomorphic mapping, optically stimulated luminescence (OSL) ages, and soil stratigraphy allowed correlation of terrace remnants and reconstruction of several past longitudinal profiles of Nahal Zin and its incision history. Together with the published lake level chronology, these data provide an opportunity to examine stream incision related to base level lowering at a millennial scale. OSL ages of the terraces fit relatively well with the established lake level chronology and follow its regression and fall. For a few thousands of years the longitudinal profile response to the lake level fall was downstream lengthening onto the exposed former lake bed. Most of the incision (~ 40 m) occurred later, when the lake level reached the top of the Amazyahu fault escarpment and continued to drop. The incision was a relatively short episode at about 17 ka and cut through this escarpment almost to its base. The fast incision, its timing, and the profiles of the incising channels indicate that the escarpment was an underwater feature and was not formed after the lake retreated.This fairly simple scenario of regressive lake level fall and knickpoint exposure and incision is modeled here using a one-dimensional numerical incision model based on a linear diffusion equation. The calculated diffusion coefficient fits earlier results and data obtained from other streams in the area and confirms the upscaling of this simple model to the millennial scale.  相似文献   

5.
Summary. During 1977 March and April, three Sacks-Evertson borehole dilatometers were installed at the ends of boreholes drilled into the sidewall of an experimental tunnel at a depth of 3.1 km in the ERPM gold mine near Johannesburg. In the following year coseismic strain changes ranging from 5 ± 10−10 to values exceeding 5 ± 10−6 were recorded for hundreds of mine tremors in the magnitude range -1 to 3.7 and at hypocentral distances of 50 m to about 2 km. Hypocentral coordinates and magnitudes were determined from seismograms recorded from an underground array of geophones. Amplitudes and polarities of the coseismic strain steps are generally in excellent agreement with theoretical expectations based on point-source dislocation theory; specifically, the strain steps are proportional to the seismic moment divided by the cube of hypocentral distance. At a strain level of 5 ± 10−9 or greater the tremors do not appear to be preceded by any short-term indications of instability even for tremors producing coseismic steps greater than 5 ± 10−6 and for which the strainmeters were within a source radius of the hypocentre. Continuous strain changes observed at the times when the mine excavation, at a distance of about 100 m, is extended are in good agreement with calculated changes based on the theory of elasticity. A similar calculation is consistent with post-seismic strain changes observed to follow some of the closer tremors. These post-seismic strains show a logarithmic dependence on time following the tremor and appear to be due to the interaction of a tremor with the adjacent mine excavation rather than to deformation within the actual seismic source region.  相似文献   

6.
The Dead Sea is an extensional basin developing along a transform fault plate boundary. It is also a terminal salt basin. Without knowledge of precise stratigraphy, it is difficult to differentiate between the role of plate and salt tectonics on sedimentary accumulation and deformation patterns. While the environmental conditions responsible for sediment supply are reasonably constrained by previous studies on the lake margins, the current study focuses on deciphering the detailed stratigraphy across the entire northern Dead Sea basin as well as syn and post-depositional processes. The sedimentary architecture of the late Quaternary lacustrine succession was examined by integrating 851 km of seismic reflection data from three surveys with gamma ray and velocity logs and the stratigraphic division from an ICDP borehole cored in 2010. This allowed seismic interpretation to be anchored in time across the entire basin. Key surfaces were mapped based on borehole lithology and a newly constructed synthetic seismogram. Average interval velocities were used to calculate isopach maps and spatial and temporal sedimentation rates. Results show that the Amora Formation was deposited in a pre-existing graben bounded by two N-S trending longitudinal faults. Both faults remained active during deposition of the late Pleistocene Samra and Lisan Formations—the eastern fault continued to bound the basin while the western fault remained blind. On-going plate motion introduced a third longitudinal fault, increasing accommodation space westwards from the onset of deposition of the Samra Formation. During accumulation of these two formations, sedimentation rates were uniform over the lake and similar. High lake levels caused an increase in hydrostatic pressure. This led to salt withdrawal, which flowed to the south and southwest causing increased uplift of the Lisan and En Gedi diapirs and the formation of localized salt rim synclines. This induced local seismicity and slumping, resulting in an increased thickness of the Lisan succession within the lake relative to its margins. Sedimentation rates of the Holocene Ze'elim Fm were 4–5 times higher than before. The analysis presented here resolves central questions of spatial extent and timing of lithology, deposition rates and their variability across the basin, timing of faulting at and below the lake floor, and timing and extent of salt and plate tectonic phases and their effect on syn and post-depositional processes. Plate tectonics dictated the structure of the basin, while salt tectonics and sediment accumulation were primarily responsible for its fill architecture during the timeframe examined here.  相似文献   

7.
The seismic source regions are identified on the basis of spatial and temporal distributions of shocks (1900–1989), recurrence relations and the tectonic architecture of the Indian subcontinent and adjoining areas. The probable occurrence of the maximum magnitude earthquake is estimated using the theory of extreme values of Gumbel. The parameters of the first and third asymptotic distributions of extremes and their uncertainty values are computed for the seven identified seismic source regions of India and adjacent areas. The third-type distribution curve is preferable to the first type in all the regions, as revealed by the χ2 test. The results of the third asymptotic distribution indicate the upper bound to earthquake magnitude w is equal to 8.94 ± 0.21 for Assam, 8.56 ± 0.29 for Bihar-Nepal, 8.43 ± 0.10 for Kangra, 8.97 ± 0.27 for Hindukush, 7.61 ± 0.24 for Pakistan-Cutch, 7.34 ± 0.12 for Koyna and 8.98 ± 0.27 for Andaman Sea seismic source regions. The predicted most probable largest earthquake magnitude is computed for return periods of 10, 20, 50, 75 and 100 yr in each source region.  相似文献   

8.
The Plataforma Burgalesa is a partly exposed extensional forced fold system with an intermediate salt layer, which has developed along the southern portion of the Basque‐Cantabrian Basin from Malm to Early Cretaceous as part of the Bay of Biscay‐Pyrenean rift system. Relationships between syn‐ and pre‐rift strata of the supra‐salt cover sequence and distribution of intra‐cover second‐order faults are observed both along seismic sections and at the surface. These relationships indicate an along‐strike variability of the extensional structural style. After a short period of salt mobilization and forced folding, high slip rates in the central portion of the major basement faults have rapidly promoted brittle behaviour of the salt layer, preventing further salt mobilization and facilitating the propagation of the fault across the salt layer. In contrast, at the tip regions of basement faults, slower slip rates have facilitated ductile salt behaviour, ensuring its further evaporite evacuation, preventing fault propagation across the salt layer and, in essence, allowing for a long‐living forced folding process. Our results indicate the important effect of along‐strike variation in displacement and displacement rates in controlling evaporite behaviour in extensional basins. Amount of displacement and displacement rates are key factors controlling the propagation of basement faults across evaporite layers. In addition, growth strata patterns are recognized as a powerful tool for constraining the up‐dip propagation history of basement faults in extensional fault‐related fold systems with intermediate décollement levels.  相似文献   

9.
A hypothesis for the seismogenesis of a double seismic zone   总被引：1，自引：0，他引：1  
The seismogenesis of a double seismic zone, in particular the lower layer of a double seismic zone, has not been adequately explained in the literature. On the basis of seismic data and geothermal structures along three well-studied cross-sections in the Kuril-Kamchatka and Japan subduction zones, we investigate the temperature/pressure conditions associated with seismogenic structures of the double seismic zones. the corresponding T/P loci seem to suggest that earthquakes observed in the lower layer and in the lower part (below approximately 130 ± 20 km) of the top layer of a double seismic zone were caused by metastable phase transition-a mechanism similar to that responsible for deep-focus earthquakes only at lower temperature/pressure conditions. Under this hypothesis, the wedge-shaped configuration of a double seismic zone is interpreted to represent the loci of the kinetic boundary of the phase transition. According to theoretical/experimental studies and the constraints imposed by our observations, a likely candidate for such a phase transition is the metastable Al-rich enstatite decomposing into the assemblage of Al-poor enstatite plus garnet. Earthquakes in the upper part of the top layer were most probably due to conventional mechanisms such as dehydration of subducted materials and/or facies change from basalt to eclogite. That the top layer involves more than one seismogenic mechanism is also implied by the distinct behaviour of seismicity in the vicinity of 130 ± 20 km. Because the presence of deviatoric stress is critical to the reaction rate of a metastable phase transition, it is inferred that single seismic zones are also caused by the same mechanisms, except that the implicit layer of a supposed double seismic zone is missing, due to the insufficient amount of appropriate metastable minerals or to the lack of appropriate deviatoric stresses in the source region.  相似文献   

10.
The Southeastern portion of the East African Rift System reactivates Mesozoic transform faults marking the separation of Madagascar from Africa in the Western Indian Ocean. Earlier studies noted the reactivation of the Davie Fracture Zone in oceanic lithosphere as a seismically active extensional fault, and new 3D seismic reflection data and exploration wells provide unprecedented detail on the kinematics of the sub-parallel Seagap fault zone in continental/transitional crust landward of the ocean-continent transition. We reconstruct the evolution of the seismically active Seagap fault zone, a 400-km-long crustal structure affecting the Tanzania margin, from the late Eocene to the present day. The Seagap fault zone is represented by large-scale localized structures affecting the seafloor and displaying growth geometries across most of the Miocene sediments. The continuous tectonic activity evident by our seismic mapping, as well as 2D deep seismic data from literature, suggests that from the Middle-Late Jurassic until 125 Ma, the Seagap fault acted as a regional structure parallel to, and coeval with, the dextral Davie Fracture Zone. The Seagap fault then remained active after the cessation of both seafloor spreading in the Somali basin and strike-slip activity on the Davie Fracture Zone, till nowaday. Its architecture is structurally expressed through the sequence of releasing and restraining bends dating back at least to the early Neogene. Seismic sections and horizon maps indicate that those restraining bends are generated by strike-slip reactivation of Cretaceous structures till the Miocene. Finally based on the interpretation of edge-enhanced reflection seismic surfaces and seafloor data, we shows that, by the late Neogene, the Seagap fault zone switched to normal fault behaviour. We discuss the Seagap fault's geological and kinematic significance through time and its current role within the microplate system in the framework of the East African rift, as well as implications for the evolution and re-activation of structures along sheared margins. The newly integrated datasets reveal the polyphase deformation of this margin, highlighting its complex evolution and the implications for depositional fairways and structural trap and seal changes through time, as well as potential hazards.  相似文献   

11.
The investigation of L g attenuation characteristics in the region bounding the western branch of the East African rift system using digital recordings from a seismic network located along the rift between Lake Rukwa and Lake Malawi is reported. A set of 24 recordings of L g waves from 12 regional earthquakes has been used for the determination of anelastic attenuation, Q Lg , and regional body-wave magnitude, m b Lg , scale. The events used have body-wave magnitudes, m b , between 4.6 and 5.5, which have been determined teleseismically and listed in ISC bulletins. The data were time-domain displacement amplitudes measured at 10 different frequencies (0.7–5.0  Hz). Q Lg and its frequency dependence, η , in the region can be represented in the form Q Lg = (186.2 ± 6.5)  f  (0.78±0.05). This model is in agreement with models established in other active tectonic regions. The L g -wave-based magnitude formula for the region is given by m b Lg = log   A + (3.76 ± 0.38)  log   D − (5.72 ± 1.06), where A is a half-peak-to-peak maximum amplitude of the 1  s L g wave amplitude in microns and D is the epicentral distance in kilometres. Magnitude results for the 12 regional earthquakes tested are in good agreement with the ISC body-wave magnitude scale.  相似文献   

12.
The magnitude and frequency of normal-fault palaeoearthquakes are usually determined by trenching studies that ascertain the size and number of colluvial wedges along the fault. Such information can be invaluable in predicting the seismic hazard and potential for a future earthquake in that region. Digging trenches across normal faults, however, is environmentally intrusive, expensive and limited in the penetration depth. To overcome these problems we propose the use of 3-D seismic tomography as a means to identify the shapes and sizes of colluvial wedges along normal faults. As an example,2-D and 3-D seismic surveys were conducted across the Oquirrh fault, Utah with the purpose of imaging the normal-fault structure to a depth of about 10  m. Results show that the 3-D tomogram clearly delineates the fault zone and a colluvial wedge, both of which correlate extremely well with the geological cross-section interpreted from an adjacent trench. The thickness of the colluvial wedge image is used in conjunction with a seismic section to compute an estimate of a 6.8 moment magnitude earthquake for the most recent event on this fault, which is in close agreement with the 7.0 estimate based on a nearby trenching study. These tomographic results demonstrate, for the first time, that seismic imaging methods can be used in some cases to estimate unambiguously the shapes of colluvial wedges and the sizes of prehistoric earthquakes. Thus, seismic tomography has the possibility of providing cheaper, deeper and wider, but less resolved, images of fault systems than the intrusive excavation of trenches across faults.  相似文献   

13.
Here we present datasets from a hydroacoustic survey in July 2011 at Lake Torneträsk, northern Sweden. Our hydroacoustic data exhibit lake floor morphologies formed by glacial erosion and accumulation processes, insights into lacustrine sediment accumulation since the beginning of deglaciation, and information on seismic activity along the Pärvie Fault. Features of glacial scouring with a high‐energy relief, steep slopes, and relative reliefs of more than 50 m are observed in the large W‐basin. The remainder of the lacustrine subsurface appears to host a broad variety of well preserved formations from glacial accumulation related to the last retreat of the Fennoscandian ice sheet. Deposition of glaciolacustrine and lacustrine sediments is focused in areas situated in proximity to major inlets. Sediment accumulation in distal areas of the lake seldom exceeds 2 m or is not observable. We assume that lack of sediment deposition in the lake is a result of different factors, including low rates of erosion in the catchment, a previously high lake level leading to deposition of sediments in higher elevated paleodeltas, tributaries carrying low suspension loads as a result of sedimentation in upstream lakes, and an overall low productivity in the lake. A clear off‐shore trace of the Pärvie Fault could not be detected from our hydroacoustic data. However, an absence of sediment disturbance in close proximity to the presumed fault trace implies minimal seismic activity since deposition of the glaciolacustrine and lacustrine sediments.  相似文献   

14.
Slip rate on the Dead Sea transform fault in northern Araba valley (Jordan)   总被引：11，自引：0，他引：11  
The Araba valley lies between the southern tip of the Dead Sea and the Gulf of Aqaba. This depression, blanketed with alluvial and lacustrine deposits, is cut along its entire length by the Dead Sea fault. In many places the fault is well defined by scarps, and evidence for left-lateral strike-slip faulting is abundant. The slip rate on the fault can be constrained from dated geomorphic features displaced by the fault. A large fan at the mouth of Wadi Dahal has been displaced by about 500 m since the bulk of the fanglomerates were deposited 77–140 kyr ago, as dated from cosmogenic isotope analysis (10Be in chert) of pebbles collected on the fan surface and from the age of transgressive lacustrine sediments capping the fan. Holocene alluvial surfaces are also clearly offset. By correlation with similar surfaces along the Dead Sea lake margin, we propose a chronology for their emplacement. Taken together, our observations suggest an average slip rate over the Late Pleistocene of between 2 and 6 mm yr−1, with a preferred value of 4 mm yr−1. This slip rate is shown to be consistent with other constraints on the kinematics of the Arabian plate, assuming a rotation rate of about 0.396° Myr−1 around a pole at 31.1°N, 26.7°E relative to Africa.  相似文献   

15.
The Sassa‐Guardistallo Basin (SGB) is located close to the Tyrrhenian Sea and represents one of the most internal Neogene–Quaternary hinterland basins of the Northern Apennines fold‐and‐thrust belt. Its sedimentary succession consists of ca. 400‐m‐thick Late Tortonian–Messinian continental – largely conglomeratic – units overstepping a mainly shaly substratum (Palombini Shales) and overlain by Late Messinian evaporites and marine to continental Pliocene–Pleistocene sediments. This stratigraphic succession can be approximated to a composite rheological multilayer that dictated the style of basin deformation. Detailed geological mapping and structural analysis revealed that basin deposits were affected by compressional deformations that can be found both at map and outcrop scales. Decametric splay thrusts emanating from the substratum–conglomerate interface locally double the continental succession and are bounded by a roof thrust along the Late Messinian evaporite décollement, defining a deformation pattern consistent with a duplex‐like structure. The time–space structural evolution of the basin inferred from the fieldwork was addressed and tested by analogue modelling that approximated the rheological stratification of the study area to a layered brittle–ductile system. The model results support the hypothesis that the evolution of the thrust system affecting the SGB started as an early floor imbricate fan thrust system that successively evolved to a duplex structure as the link thrusts propagated into the upper décollement layer that resulted from the deposition of the Late Messinian evaporites. Models display many structural features that may be compared with the natural prototype, and highlight the importance of syntectonic sedimentation in the development and evolution of tectonic structures. The results of this study retain relevant implications for the Neogene evolution of the Tyrrhenian Basin–Northern Apennines system. This study also supports that combining between field structural analyses and analogue modelling can give useful hints into the evolutionary history of tectonically complex areas.  相似文献   

16.
A pockmark field has been encountered in the northwestern Barents Sea, SO km southeast of Hopen island. High resolution seismic records and side scan sonographs show that the features are small (10–20 m diameter), shallow (<1 m deep) structures that may cover up to 25% of the sea floor in local areas. Pockmark existence seem to be dependent on the presence of soft, Holocene mud. In more firm sea-floor they seem to concentrate in the partly infilled troughs of iceberg plough marks. The pockmark distribution, characteristics of the underlying sedimentary bedrock and thin cover of glacigenic sediments in the area, indicate they are formed by ascending gas from a deeper, probably petrogenic source. It is inferred that pockmarks may be found in larger parts of the Barents Sea.  相似文献   

17.
Reflection seismic data show that the late Cenozoic Safford Basin in the Basin and Range of south-eastern Arizona, is a 4.5-km-deep, NW-trending, SW-dipping half graben composed of middle Miocene to upper Pliocene sediments, separated by a late Miocene sequence boundary into lower and upper basin-fill sequences. Extension during lower basin-fill deposition was accommodated along an E-dipping range-bounding fault comprising a secondary breakaway zone along the north-east flank of the Pinaleño Mountains core complex. This fault was a listric detachment fault, active throughout the mid-Tertiary and late Cenozoic, or a younger fault splay that cut or merged with the detachment fault. Most extension in the basin was accommodated by slip on the range-bounding fault, although episodic movement along antithetic faults temporarily created a symmetric graben. Upper-plate movement over bends in the range-bounding fault created rollover structures in the basin fill and affected deposition within the half graben. Rapid periods of subsidence relative to sedimentation during lower basin-fill deposition created thick, laterally extensive lacustrine or alluvial plain deposits, and restricted proximal alluvian-fan deposits to the basin margins. A period of rapid extension and subsidence relative to sediment influx, or steepening of the upper segment of the range-bounding fault at the start of upper basin-fill deposition resulted in a large downwarp over a major fault bend. Sedimentation was restricted to this downwarp until filled. Episodic subsidence during upper basin-fill deposition caused widespread interbedding of lacustrine and fluvial deposits. Northeastward tilting along the south-western flank of the basin and north-eastward migration of the depocentre during later periods of upper basin-fill deposition suggest decreased extension rates relative to late-stage core complex uplift.  相似文献   

18.
A succession of depositional sequences, recording middle-late Pleistocene and Holocene glacial–interglacial cycles, documents the impact of short-term tectonic deformation on the western Adriatic margin. The western Adriatic margin is part of the Apennine foreland which was intensely, though variably, deformed during the Meso-Cenozoic evolution of the Adriatic region from a passive margin to a foreland basin. The study area extends offshore Gargano Promontory, an uplifted sector of the Adriatic foreland, and includes three major deformation belts located along or cross-strike to the margin: (1) the NW-SE Gallignani-Pelagosa ridge, (2) the WSW-ENE Tremiti-Pianosa high (both located north of Gargano) and (3) the W-E to NW-SE Gondola fault deformation belt (in the south Adriatic). Long-term deformation along these tectonic lineaments is documented on conventional low-frequency seismic profiles by regional folds and faults affecting Eocene–Miocene units overlain by dominantly draping Plio-Quaternary deposits. At this scale of observation, only north of Gargano Promontory there is some evidence of Plio-Quaternary units thinning against structural highs, thus suggesting that tectonic deformation was protracted through this interval. Based on new high-resolution seismic data, we show that deformation along these pre-existing tectonic structures continued during the Quaternary, affecting middle-late Pleistocene and even Holocene units on the shelf and upper slope north and south of Gargano Promontory. These recent deformations consist of gentle folds and high-angle faults, locally producing topographic relief that affects the stratigraphy and thickness of syn-tectonic deposits. We interpret the small-scale, shallow faults and gentle folds affecting middle-late Pleistocene and Holocene deposits, north and south Gargano Promontory, as the evidence of ongoing foreland deformation along inherited regional fold and fault systems.  相似文献   

19.
The ∼380-m-thick mudstone–siltstone-dominated Vischkuil Formation represents the initiation phase of a 1.3-km-thick prograding basin floor to slope to shelf succession that marks a significant increase in the rate of siliciclastic sediment supply to the early Karoo Basin in the Permian. In the upper Vischkuil Formation three well exposed, widespread (∼3000 km2) 10–70-m-thick intervals of deformed strata are encased within undeformed sediments. Such chaotic mass movement deposits that are mappable over areas comparable with seismic-scale mass transport deposits are commonly associated with submarine slope settings. However, the surrounding lithofacies and the correlation of distinctive marker beds indicate that these deformation intervals developed in a distal low gradient basin floor setting. The deformed intervals comprise a lower division of tight down-flow verging folds dissected by thrust planes that sole out onto a highly sheared décollement surface that are interpreted as slides. The lower divisions are overlain by an upper division of chaotic lithofacies with large contorted clasts of sandstone supported by a fine-grained matrix interpreted as a debrite. The juxtaposition of these lithofacies, the distribution of thickness of the divisions, and their close kinematic relationships indicate that the emplacement of the debris-flows triggered and drove the underlying slide, in a low-gradient distal setting. Individual beds in the deformed intervals can be mapped laterally into undeformed strata indicating limited movement of the slide. Therefore, widespread zones of syn-sedimentary deformation in deep-water settings do not necessarily indicate a slope setting and should not be used as single criterion to determine depositional setting. When associated with major debrites they may be developed on a flat basin floor.  相似文献   

20.
Earthquake populations have recently been shown to have many similarities with critical-point phenomena, with fractal scaling of source sizes (energy or seismic moment) corresponding to the observed Gutenberg–Richter (G–R) frequency–magnitude law holding at low magnitudes. At high magnitudes, the form of the distribution depends on the seismic moment release rate M˙ and the maximum magnitude m max . The G–R law requires a sharp truncation at an absolute maximum magnitude for finite M˙ . In contrast, the gamma distribution has an exponential tail which allows a soft or 'credible' maximum to be determined by negligible contribution to the total seismic moment release. Here we apply both distributions to seismic hazard in the mainland UK and its immediate continental shelf, constrained by a mixture of instrumental, historical and neotectonic data. Tectonic moment release rates for the seismogenic part of the lithosphere are calculated from a flexural-plate model for glacio-isostatic recovery, constrained by vertical deformation rates from tide-gauge and geomorphological data. Earthquake focal mechanisms in the UK show near-vertical strike-slip faulting, with implied directions of maximum compressive stress approximately in the NNW–SSE direction, consistent with the tectonic model. Maximum magnitudes are found to be in the range 6.3–7.5 for the G–R law, or 7.0–8.2 m L for the gamma distribution, which compare with a maximum observed in the time period of interest of 6.1 m L . The upper bounds are conservative estimates, based on 100 per cent seismic release of the observed vertical neotectonic deformation. Glacio-isostatic recovery is predominantly an elastic rather than a seismic process, so the true value of m max is likely to be nearer the lower end of the quoted range.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号