首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
Pervasive dolomites occur preferentially in the stromatoporoid biostromal (or reefal) facies in the basal Devonian (Givetian) carbonate rocks in the Guilin area, South China. The amount of dolomites, however, decreases sharply in the overlying Frasnian carbonate rocks. Dolostones are dominated by replacement dolomites with minor dolomite cements. Replacement dolomites include: (1) fine to medium, planar‐e floating dolomite rhombs (Rd1); (2) medium to coarse, planar‐s patchy/mosaic dolomites (Rd2); and (3) medium to very coarse non‐planar anhedral mosaic dolomites (Rd3). They post‐date early submarine cements and overlap with stylolites. Two types of dolomite cements were identified: planar coarse euhedral dolomite cements (Cd1) and non‐planar (saddle) dolomite cements (Cd2); they post‐date replacement dolomites and predate late‐stage calcite cements that line mouldic vugs and fractures. The replacement dolomites have δ18O values from ?13·7 to ?9·7‰ VPDB, δ13C values from ?2·7 to + 1·5‰ VPDB and 87Sr/86Sr ratios from 0·7082 to 0·7114. Fluid inclusion data of Rd3 dolomites yield homogenization temperatures (Th) of 136–149 °C and salinities of 7·2–11·2 wt% NaCl equivalent. These data suggest that the replacive dolomitization could have occurred from slightly modified sea water and/or saline basinal fluids at relatively high temperatures, probably related to hydrothermal activities during the latest Givetian–middle Fammenian and Early Carboniferous times. Compared with replacement dolomites, Cd2 cements yield lower δ18O values (?14·2 to ?9·3‰ VPDB), lower δ13C values (?3·0 to ?0·7‰ VPDB), higher 87Sr/86Sr ratios (≈ 0·7100) and higher Th values (171–209 °C), which correspond to trapping temperatures (Tr) between 260 and 300 °C after pressure corrections. These data suggest that the dolomite cements precipitated from higher temperature hydrothermal fluids, derived from underlying siliciclastic deposits, and were associated with more intense hydrothermal events during Permian–Early Triassic time, when the host dolostones were deeply buried. The petrographic similarities between some replacement dolomites and Cd2 dolomite cements and the partial overlap in 87Sr/86Sr and δ18O values suggest neomorphism of early formed replacement dolomites that were exposed to later dolomitizing fluids. However, the dolomitization was finally stopped through invasion of meteoric water as a result of basin uplift induced by the Indosinian Orogeny from the early Middle Triassic, as indicated by the decrease in salinities in the dolomite cements in veins (5·1–0·4 wt% NaCl equivalent). Calcite cements generally yield the lowest δ18O values (?18·5 to ?14·3‰ VPDB), variable δ13C values (?11·3 to ?1·2‰ VPDB) and high Th values (145–170 °C) and low salinities (0–0·2 wt% NaCl equivalent), indicating an origin of high‐temperature, dilute fluids recharged by meteoric water in the course of basin uplift during the Indosinian Orogeny. Faults were probably important conduits that channelled dolomitizing fluids from the deeply buried siliciclastic sediments into the basal carbonates, leading to intense dolomitization (i.e. Rd3, Cd1 and Cd2).  相似文献   

2.
Mineralogical, textural and geochemical investigations were made to determine the post-depositional evolution of Devonian and Early Carboniferous carbonates from Valle de Tena. The carbonate association is made up of low-Mg calcite, which occurs as micrite, spar cements, neomorphic patches and spar filling veinlets. Non-stoichiometric dolomite and ankerite occur as cements (dolomite also as replacements) in the Middle Devonian, post-dating calcite types. All these phases pre-date tectonic stylolites, indicating compaction after stabilization of the carbonate minerals. Strontium concentrations indicate that Early Devonian and Early Carboniferous micrites initially precipitated as aragonite; Middle and Late Devonian micrites precipitated as high-Mg calcites. Both precursors were diagenetically stabilized to low-Mg calcites through interaction with meteoric waters in phreatic environments. Trace elements in dolomite and ankerite indicate precipitation from Sr-enriched meteoric water. All studied carbonates, except Middle Devonian limestones, precipitated in reducing environments, which favoured incorporation of Fe and Mn. Late calcite generations precipitated from more saline waters than micrites. Light 18O values in micrites suggest alteration mainly in meteoric-phreatic environments. The dolomites and ankerites precipitated from more 18O-depleted fluids than the calcites, suggesting a greater contribution from meteoric waters. Variations in 13C of micrites represent primary secular trends, according to published 13C variations. The 13C oscillations within each succession probably relate to sea-level oscillations. Strontium isotopes also point to a meteoric origin of diagenetic fluids. Model calculations suggest that O and Sr isotopes equilibrated between calcites and fluid at relatively low water/rock ratios, whereas C isotopic signatures are inherited from limestones.  相似文献   

3.
Carbonate concretions, lenses and bands in the Pleistocene, Palaeogene and Upper Triassic coalfields of Japan consist of various carbonate minerals with varied chemical compositions. Authigenic carbonates in freshwater sediments are siderite > calcite > ankerite > dolomite >> ferroan magnesite; in brackish water to marine sediments in the coal measures, calcite > dolomite > ankerite > siderite >> ferroan magnesite; and in the overlying marine deposits, calcite > dolomite >> siderite. Most carbonates were formed progressively during burial within a range of depths between the sediment-water interface and approximately 3 km. The mineral species and the chemical composition of the carbonates are controlled primarily by the initial sedimentary facies of the host sediments and secondarily by the diagenetic evolution of pore water during burial. Based on the regular sequence and burial depth of precipitation of authigenic carbonates in a specific sedimentary facies, three diagenetic stages of carbonates are proposed. Carbonates formed during Stage I (< 500 m) strongly reflect the initial sedimentary facies, e.g. low Ca-Mg siderite in freshwater sediments which are initially rich in iron derived from lateritic soil on the nearby landmass, and Mg calcite and dolomite in brackish-marine sediments whose pore waters abound in Ca2+ and Mg2+ originating in seawater and calcareous shells. Carbonates formed during Stage II (500–2000 m) include high Ca-Mg siderite, ankerite, Fe dolomite and Fe–Mg calcite in freshwater sediments. The assemblage of Stage II carbonates in brackish-marine sediments in the coal measures is similar to that in freshwater sediments. This suggests similar diagenetic environments owing to an effective migration and mixing of pore water due to the compaction of host sediments. Carbonates formed during Stage III (> 2000 m) are Fe calcite and extremely high Ca-Mg siderite; the latter is exclusively in marine mudstones. The supply of Ca is partly from the alteration of silicates in the sediments at elevated burial temperatures. After uplift, calcite with low Mg content precipitates from percolating groundwater and fills extensional cracks.  相似文献   

4.
Carbonates in a 30 cm wide zoned kimberlite dyke from the De Beers Mine, Kimberley, S. Africa were studied by cathodoluminescence and electron microprobe techniques and their 87Sr/86Sr ratios were measured using an AEI-IM20 ion microprobe. Primary carbonates (including calcite dendrites, rhombohedral calcites in segregation vesicles and mosaic dolomite) have high Sr (0.69–1.35 wt.% SrO) and Ba (0.24–0.44% BaO) and 87Sr/86Sr ratios in the range 0.7046 to 0.7056. Secondary sparry calcite in amygdales and veins is characterised by low Ba (<0.05% BaO) and 87Sr/86Sr near 0.72. Rhombohedral calcite 0.5 cm from a contact with 2,900 my. old biotite-gneiss has minor element chemistry like that of primary carbonate, but an elevated 87Sr/86Sr ratio of 0.7103, possibly indicating crustal contamination in a boundary layer of the kimberlite magma. Amygdale-like segregations of carbonate and/or serpentine originated as gas-cavities and were not formed by liquid immiscibility. They are now filled either by secondary calcite or by minerals precipitated from residual kimberlite liquid. However, dendritic calcite and primary dolomite and calcite with high Sr, Ba and low 87Sr/86Sr demonstrate shared chemical characteristics between these carbonates and carbonatite. The primary kimberlite magma had initial 87Sr/86Sr close to 0.7046.  相似文献   

5.
The Catalan Coastal Ranges (NE part of the Eastern Iberian Margin) correspond to a system of grabens formed at the north-western margin of the Valencia Trough. Extensional activity in the Catalan Coastal Ranges occurred at least from early to late Miocene and reactivated earlier transpressive faults related to the Palaeogene compression. In the central part of the Catalan Coastal Ranges, tectonic micro and macrostructures (faults, joints, stylolites) are well developed in the Mesozoic (mainly Cretaceous) limestones as well as in the Miocene graben fill deposits. In these rocks, seven generations of fractures, which formed during different tectonic phases, have been distinguished. Type 1–4 fractures affect only the Cretaceous limestones, type 5 and 6 fractures the Cretaceous and Miocene deposits, and type 7 fractures only the Miocene sediments. The fractures are filled with calcites, and locally with an internal sediment or a dolomite cement. The Cretaceous host-rock has an average δ18O value of –4·3‰ PDB (Peedee Belemnite), an average δ13C value of +0·6‰ PDB, a 87Sr/86Sr ratio of 0·70741, up to 5630 p.p.m. of Mg2+, up to 2615 p.p.m. of Sr2+, and up to 1560 p.p.m. of Fe2+. Type 2 fractures are related to Palaeogene compression. The calcite cement filling this type of fracture has an average δ18O value of –8·2‰ PDB, an average δ13C value of –0·6‰ PDB, a 87Sr/86Sr ratio of 0·70714, up to 4560 p.p.m. of Mg2+, up to 3275 p.p.m. of Sr2+, and up to 3540 p.p.m. of Fe2+. These results indicate a fluid characterized by a high rock–fluid interaction approaching a closed system equilibrium. Type 5 fractures are related to the syn-rift stage. The calcite cement filling this type of fracture has an average δ18O value of –6·9‰ PDB, an average δ13C value of –4·3‰ PDB, a 87Sr/86Sr ratio of 0·70787, up to 5375 p.p.m. of Mg2+, up to 1750 p.p.m. of Sr2+ and up to 2855 p.p.m. of Fe2+. These results indicate a fluid characterized by a low rock–fluid interaction and an open hydrogeological system. The cements filling the compressional fractures are characterized by undulose extinction, subgrain formation and deformed mechanical twin planes indicating formation under stressed conditions. In contrast, cements filling extensional fractures are characterized by translucent crystals with uniform extinction, indicating free growth not subjected to stress.  相似文献   

6.
Detailed petrographic analyses along a depositional transect from a carbonate platform to shale basin reveals that dolomite is the principal burial diagenctic mineral in the Maryville Limestone. This study examines the role of burial dolomitization of subtidal carbonates. Dolomite occurs as a replacement of precursor carbonate and as inter- and intraparticle cements. Four different types of dolomite are identified based on detailed petrographic and gcochemical analyses. Type I dolomite occurs as small, irregular disseminations typically within mud-rich facies.Type II dolomite typically occurs as inclusions of planar euhedral rhombs (ferroan), 5–300 μm in size, in blocky clear ferroan calcite (meteoric) spar. Type II dolomite is non-luminescent. Type I and II dolomite formed during shallow to intermediate burial diagenesis. Type III dolomite consists of subhedral to anhedral crystals 10–150 μm in size occurring as thin seams along stylolites and as thick bands a few millimetres in width. This dolomite consists of dominantly non-luminescent rhombs and, less commonly, orange luminescent and zoned rhombs. Type IV dolomite consists of baroque or saddle-shaped, 100–1500 μm crystals, and is non-luminescent. Type IV dolomite formed during the period of maximum burial. Types III and IV dolomite increase in abundance downslope. Type III dolomite contains 1.2–2.6 wt% Fe and a maximum of 1000 ppm Mn. The distribution of these elements displays no distinct vertical or lateral trends. In contrast, Fe and Mn distributions in Type IV dolomite exhibit distinct spatial trends, decreasing from 3.5–4.5 wl% Fe and 0.1–0.3 wt% Mn in the west (slope/basin) to 1.5–2.5 wt% Fe and less than 600 ppm Mn in the east (shelf margin), a distance of approximately 60 km. Spatial trends in Fe and Mn distributions in Type IV saddle dolomite, suggest a west-east fluid flow during late burial diagenesis. Types III and IV dolomite have a mean δ18O value of - 7.8%00 and a mean δ13C value of + 1.1%00 (relative to the PDB standard). Based on a range of assumed basinal water composition of 2.8%00 SMOW, temperatures calculated from δ18O values of Types III and IV dolomite range between 75 and 160°C. 87Sr/86Sr data for Types III and IV dolomite range from 0.7111 to 0.7139. These values are radiogenic when compared to Cambrian marine values and are consistent with the presence of a diagenetic fluid that interacted with siliciclastic sediments. The distribution of Palaeozoic facies in the southern Appalachians indicates a Cambrian shale source for the fluids, whilst burial curves suggest a Middle Ordovician age for burial fluid movement.  相似文献   

7.
The partly dolomitized Swan Hills Formation (Middle‐Upper Devonian) in the Simonette oil field of west‐central Alberta underwent a complex diagenetic history, which occurred in environments ranging from near surface to deep (>2500 m) burial. Five petrographically and geochemically distinct dolomites that include both cementing and replacive varieties post‐date stylolites in limestones (depths >500 m). These include early planar varieties and later saddle dolomites. Fluid inclusion data from saddle dolomite cements (Th=137–190 °C) suggest that some precipitated at burial temperatures higher than the temperatures indicated by reflectance data (Tpeak=160 °C). Thus, at least some dolomitizing fluids were ‘hydrothermal’. Fluorescence microscopy identified three populations of primary hydrocarbon‐bearing fluid inclusions and confirms that saddle dolomitization overlapped with Upper Cretaceous oil migration. The source of early dolomitizing fluids probably was Devonian or Mississippian seawater that was mixed with a more 87Sr‐rich fluid. Fabric‐destructive and fabric‐preserving dolostones are over 35 m thick in the Swan Hills buildup and basal platform adjacent to faults, thinning to less than 10 cm thick in the buildup between 5 and 8 km away from the faults. This ‘plume‐like’ geometry suggests that early and late dolomitization events were fault controlled. Late diagenetic fluids were, in part, derived from the crystalline basement or Palaeozoic siliciclastic aquifers, based on 87Sr/86Sr values up to 0·7370 from saddle dolomite, calcite and sphalerite cements, and 206Pb/204Pb of 22·86 from galena samples. Flow of dolomitizing and mineralizing fluids occurred during burial greater than 500 m, both vertically along reactivated faults and laterally in the buildup along units that retained primary and/or secondary porosity.  相似文献   

8.
The oxygen isotope compositions of diagenetic carbonate minerals from the Lower Jurassic Inmar Formation, southern Israel, have been used to identify porewater types during diagenesis. Changes in porewater composition can be related to major geological events within southern Israel. In particular, saline brines played an important role in late (Pliocene-Pleistocene) dolomitization of these rocks. Diagenetic carbonates included early siderite (δ18OSMOW=+24.4 to +26.5‰δ13CPDB=?1.1 to +0.8‰), late dolomite, ferroan dolomite and ankerite (δ18OSMOW=+18.4 to +25.8‰; δ13CPDB=?2.1 to +0.2‰), and calcite (δ18OSMOW=+21.3 to +32.6‰; δ13CPDB=?4.2 to + 3.2‰). The petrographic and isotopic results suggest that siderite formed early in the diagenetic history at shallow depths. The dolomitic phases formed at greater depths late in diagenesis. Crystallization of secondary calcite spans early to late diagenesis, consistent with its large range in isotopic values. A strong negative correlation exists between burial depth (temperature) and the oxygen isotopic compositions of the dolomitic cements. In addition, the δ18O values of the dolomitic phases in the northern Negev and Judea Mountains are in isotopic equilibrium with present formation waters. This behaviour suggests that formation of secondary dolomite post-dates the tectonic activity responsible for the present relief of southern Israel (Upper Miocene to Pliocene) and that the dolomite crystallized from present formation waters. Such is not the case in the Central Negev. In that locality, present formation waters have much lower salinities and δ18O values, indicating invasion of freshwater, and are out of isotopic equilibrium with secondary dolomite. Recharge of the Inmar Formation by meteoric water in the Central Negev occurred in the Pleistocene, and halted formation of dolomite.  相似文献   

9.
Widespread dolomitization and leaching occur in the Asbian to Brigantian (Dinantian) sequence of the Bowland Basin. Within this mudrock-dominated succession, dolomite is developed in calcarenites and limestone breccia/conglomerates deposited in a carbonate slope environment (Pendleside Limestone) and also within graded quartz wackes deposited by density currents in a generally ‘starved’ basin environment (Pendleside Sandstone). The dolomitized intervals range in thickness from less than one metre to several tens of metres and have a stratabound nature. All stages of calcite cement pre-date dolomitization and calcite veins are dolomitized. Dolomite crystals replace neomorphic spar and may also contain insoluble residues that were concentrated along stylolites. Thus dolomitization was a late stage process within the carbonate diagenetic sequence. A late-stage diagenetic origin is also indicated within the sandstones, with dolomite post-dating the development of quartz overgrowths. Six main textural styles of dolomite are observed: (1) scattered; (2) mosaic; (3) subhedral to euhedral rhombic; (4) microcrystalline; (5) single crystal and (6) saddle. The style of dolomite developed is dependent on the host rock mineralogy, on whether it is space-filling or replacive and also on temperature. Chemically the dolomite varies from near stoichiometric compositions to ankeritic varieties containing up to 20 mole % FeCO3. Generally the dolomites have isotopic compositions depleted in δ18O compared to the host limestone, with similar or lighter δ13C values. Initial dolomite was of the scattered type, but with progressive replacement of the host a mosaic dolostone with a sucrosic texture was produced. There was a general increase in the Fe and Mn content and reduction in δ18O ratio of the crystals during dolomitization. Leaching is restricted to partly dolomitized horizons, where calcite, feldspars, micas, clays and, to some extent, dolomite have been leached. This has produced biomouldic and vuggy secondary porosity within the carbonates, whereas in the sandstones honeycombed, corroded and floating grains associated with oversized pores occur. Porosity within both carbonates and sandstones is reduced by ferroan dolomite/ankerite cements. Field, petrographic and chemical characteristics indicate that dolomitizing solutions were predominantly derived from the enclosing mudrocks (Bowland Shales) during intermediate/deep burial. Fluid migration out of the mudrocks would have been sided by dehydration reactions and overpressure, the fluids migrating along the most permeable horizons—the coarse grained carbonates and sandstones that are now dolomitized and contain secondary porosity.  相似文献   

10.
Early marine diagenetic dolomite is a rather thermodynamically-stable carbonate phase and has potential to act as an archive of marine porewater properties. However, the variety of early to late diagenetic dolomite phases that can coexist within a single sample can result in extensive complexity. Here, the archive potential of early marine dolomites exposed to extreme post-depositional processes is tested using various types of analyses, including: petrography, fluid inclusion data, stable δ13C and δ18O isotopes, 87Sr/86Sr ratios, and U-Pb age dating of various dolomite phases. In this example, a Triassic carbonate platform was dissected and overprinted (diagenetic temperatures of 50 to 430°C) in a strike-slip zone in Southern Spain. Eight episodes of dolomitization, a dolostone cataclasite and late stage meteoric/vadose cementation were recognized. The following processes were found to be diagenetically relevant: (i) protolith deposition and fabric-preservation, and marine dolomitization of precursor aragonite and calcite during the Middle–Late Triassic; (ii) intermediate burial and formation of zebra saddle dolomite and precipitation of various dolomite cements in a Proto-Atlantic opening stress regime (T ca 250°C) during the Early–Middle Jurassic; (iii) dolomite cement precipitation during early Alpine tectonism, rapid burial to ca 15 km, and high-grade anchizone overprint during Alpine tectonic evolution in the Early Eocene to Early Miocene; (iv) brecciation of dolostones to cataclasite during the onset of the Carboneras Fault Zone activity during the Middle Miocene; and (v) late-stage regression and subsequent meteoric overprint. Data shown here document that, under favourable conditions, early diagenetic marine dolomites and their archive data may resist petrographic and geochemical resetting over time intervals of 108 or more years. Evidence for this preservation includes preserved Late Triassic seawater δ13CDIC values and primary fluid inclusion data. Data also indicate that oversimplified statements based on bulk data from other petrographically-complex dolomite archives must be considered with caution.  相似文献   

11.
The isotopic composition of strontium in surface water in continental basins is determined primarily by the geology of the basin and to a lesser extent by climatic conditions. Consequently, the 87Sr/86Sr ratios of brines in such basins can change only as a result of changes in the geology or climate. This principle of isotope geology was studied by analysis of a suite of non-marine carbonate rocks from the Flagstaff Formation (Palaeocene-Eocene) of Utah. The samples were collected from a section in Fairview Canyon of Sanpete County. They include both limestone and dolomite and were selected to have low non-carbonate residues. The concentrations of strontium in calcites averages 383 ± 128 p.p.m., while those of dolomites increase from 354 ± 74 p.p.m. in the lower 43 m of section to a maximum of 2259 p.p.m. higher up. The increase in the strontium content of dolomite is interpreted as evidence for a change from steady-state to progressively more evaporitic conditions. Two dolomites have isotopic compositions of oxygen expressed as δ18O = -2.75‰ (relative to the PDB standard) and are enriched in 18O relative to two calcites whose average δ18O value is -9.9‰. The 87Sr/86Sr ratios of the carbonate minerals range from 0.70890 to 0.71260. These values are clearly greater than the 87Sr/86Sr ratio of marine carbonates of Early Eocene age which is 0.70744. The variation of the 87Sr/86Sr ratio in this section of the Flagstaff Formation is real and reflects the occurrence of geological events which changed the isotopic composition of Sr entering Lake Flagstaff. The non-carbonate fractions of six carbonate rocks and one sandstone fit a straight line on the strontium mixing diagram in co-ordinates of initial 87Sr/86Sr and 1/Sr concentration. These results suggest that the isotopic composition of strontium in Lake Flagstaff may have been modulated by periodic input of volcanogenic detritus of felsic composition.  相似文献   

12.
Abstract

The Upper Triassic Chang 8 Member, the eighth member of the Yanchang Formation, is a key reservoir interval in the Jiyuan area of the Ordos Basin. The reservoir quality of the Chang 8 Member tight sandstones is extremely heterogeneous owing to the widespread distribution of carbonate cements. The carbonate cements commonly develop near sandstone–mudstone interfaces and gradually decrease away from the interfaces to the centres of the sand bodies. However, the content of carbonate cements (≤6%) has a positive correlation with the visual porosity in the Chang 8 Member sandstone, revealing that the carbonate cements contribute to the compaction resistance and the residual primary pores of reservoirs during the diagenetic process. Three main types of carbonate cement are identified: type I (calcite), type II (calcite and ferrocalcite), and type III (dolomite and ankerite). The type I calcite is characterised by enriched δ13C (mean –3.41‰) and δ18O (mean –15.17‰) values compared with the type II (mean δ13C?=?–7.33‰, δ18O?=?–18.90‰) and type III (mean δ13C?=?–10.0‰, δ18O?=?–20.2‰) cements. Furthermore, the mean δ18O value (–4.7‰) of the type I pore fluids is 1.5‰ and 0.9‰ lower than the type II (mean –3.2‰) and type III (mean –3.8‰) pore fluids, respectively. This indicates that the evolving pore fluids experienced some relative strong water–rock interactions that provided the original materials (e.g. Ca2+, Fe3+, and Mg2+) for the carbonate cements during the diagenetic process. The highly saline lake water directly provided the primary material for the type I calcite precipitation, which also provided the material necessary for the precipitation of the type II and type III carbonate cements, causing enriched δ18O values of the pore fluids during the precipitation of the type II and type III carbonate cements. Although the earlier dissolved pores were filled with ferrocalcite, dolomite and ankerite in the middle–late diagenetic stages, some residual pores and fractures remained to become the potential reservoir storage spaces for the oil and gas exploration in the Jiyuan area.  相似文献   

13.
Summary The eastern Pyrenees host a large number of talc-chlorite mineralizations of Albian age (112–97 Ma), the largest of which occur in the St. Barthelemy massif. There talc develops by hydrothermal replacement of dolostones, which were formed by alteration of calcite marbles. This alteration is progressive. Unaltered calcite marbles have oxygen isotope composition of about 25‰ (V-SMOW). The δ18O values decrease down to values of 12‰ towards the contact with dolostones. This 18O depletion is accompanied by Mg enrichment, LREE fractionation and systematic shifts in the Sr isotope compositions, which vary from 87Sr/86Sr = 0.7087–0.7092 in unaltered calcite marbles to slightly more radiogenic compositions with 87Sr/86Sr = 0.7094 near dolomitization fronts. Dolostones have δ18O values (about 9‰) lower than calcitic marbles, higher REE content and more radiogenic Sr isotope composition (87Sr/86Sr = 0.7109 to 0.7130). Hydrothermal calcites have δ18O values close to dolostones but substantially lower δ13C values, down to −6.5‰, which is indicative of the contribution of organic matter. The REE content of hydrothermal calcite is one order of magnitude higher than that of calcitic marbles. Its highly radiogenic Sr composition with 87Sr/86Sr = 0.7091 to 0.7132 suggests that these elements were derived from silicate rocks, which experienced intense chlorite alteration during mineralization. The chemical and isotopic compositions of the calcite marbles, the dolostones and the hydrothermal calcites are interpreted as products of successive stages of fluid-rock interaction with increasing fluid-rock ratios. The hydrothermal quartz, calcite, talc and chlorite are in global mutual isotopic equilibrium. This allows the calculation of the O isotope composition of the infiltrating water at 300 °C, which is in the δ18O = 2–4.5‰ range. Hydrogen isotope compositions of talc and chlorite indicate a δD = 0 to −20‰. This water probably derived from seawater, with minor contribution of evolved continental water.  相似文献   

14.
The burial diagenesis of sandstones, limestones, and dolostones of the Lower Devonian La Vid Group in the Cantabrian Zone (NW Spain) reveal a covariance of carbon and oxygen isotope values with magnetic susceptibility. Also, strontium isotopes, and to a minor degree Fe, follow this trend. The main carriers of the magnetic susceptibility appear to be diagenetic Fe-carbonates, i.e., siderite, ferroan dolomite, and ankerite, which occur as cements in primary and secondary voids, as well as in fractures. In some layers, especially at the top of the succession there occurs additionally secondary Fe-chlorite and pyrite. The Fe-carbonates were formed during upward migration of a reducing, iron-bearing, petroliferous fluid that was depleted in 13C and carried radiogenic Sr. Similar geochemical covariance and/or correlations can be expected in other sedimentary successions affected by the migration of petroliferous formation fluids.  相似文献   

15.
颜佳新  伍明 《古地理学报》2004,6(2):191-195
菊花状天青石是华南地区栖霞组内一种特殊的矿物集合体,形成于早期成岩作用阶段。在研究其成因过程中,系统分析了湖北黄石和湖南浏阳栖霞组内菊花状天青石的Sr同位素组成以及湖南浏阳、湖北黄石、江西永丰和广西来宾四处天青石假象、天青石围岩（泥晶灰岩）和围岩中方解石脉的Sr同位素组成。Sr同位素分析结果表明,天青石中的87Sr/ 86Sr最高值为0.707525,最低值为0.706981,平均值为0.707215。与天青石相比,天青石假象、天青石围岩和方解石脉的87Sr/ 86Sr值整体相对富含87Sr。由于天青石假象和方解石脉明显为晚期成岩作用成因,它们相对富含87Sr的锶同位素特征应是晚期成岩作用叠加的结果,与其类似的泥晶灰岩的87Sr/ 86Sr值也可能同样受到了晚期成岩作用的影响。栖霞组菊花状天青石比同组泥晶灰岩更好地记录了栖霞期海水的Sr同位素组成。  相似文献   

16.
Calcite content, Sr concentrations, and isotopes of calcites in the Chinese deserts are systematically studied in this paper. Calcite contents, which are calculated according to acid-soluble Ca contents in the deserts, are generally higher in the sandy deserts than in the sandy lands and decrease roughly from northwest to northeast of China. Acid-soluble Sr is well correlated with calcite in the Chinese deserts, implying acid-soluble Sr comes mainly from the calcite dissolution. Sr concentrations in calcites, calculated on the basis of calcite contents and acid-soluble Sr concentrations in the deserts, have an inverse relation to calcite contents, essentially mirroring the degree of Sr substitution for Ca in the calcite development. Desert calcites have regional variations in Sr isotopic ratios. Calcite Sr isotopic ratios depend on geological settings and chemical weathering. The Badain Jaran, and Tengger deserts are probably affected by additional factors such as the remote groundwater cycle or overturning of underlying sand deposits.Only four deserts (Taklimakan, Qaidam, Badain Jaran, and Tengger) appear to be potential sources of eolian deposits in the Chinese Loess Plateau (CLP). Isotopic signatures of calcite Sr and silicate Nd further indicate that the Tengger desert was not an important source for eolian deposits in the CLP. Eolian calcite was probably enriched due to wind sorting from the potential sources to the CLP and suffered weathering–leaching after it accumulated in the CLP. Sr isotopic compositions and Ca/Sr molar ratios of calcites are different between the deserts and the Lingtai profile, due to the integrated effect of wind sorting and weathering–leaching.It is essential to calculate accurately the 87Sr/86Sr ratio and Sr concentration of eolian calcite entering the oceans according to geochemical data of the Chinese deserts, because of the importance of the Chinese deserts in the global dust cycle. The calculated Sr concentration and 87Sr/86Sr ratio of eolian calcite entering the North Pacific Ocean, are 11.75 μmol/g and 0.71032, respectively. The calculated values in this study are close to the recommended values by Jacobson [Jacobson A. D. (2004) Has the atmospheric supply of dissolved calcite dust to seawater influenced the evolution of marine 87Sr/86Sr ratios over the past 2.5 million years? Geochem. Geophys. Geosyst. 5(12), 1–9, Q12002. doi:10.1029/2004GC000750]. Using the same model as that of Jacobson (2004), the effect of Asia dust on the evolution of seawater Sr isotopes is evaluated. (87Sr/86Sr)seawater increases by 0.3 × 10−5 if the lower dust flux of 2.34 × 108 mol Sr/yr is used in the model, suggesting the little effect of Asian dust on the seawater Sr record in the Quaternary. The increase in (87Sr/86Sr)seawater is 1.5 × 10−5 if the higher value of 1.17 × 109 mol Sr/yr is used, as observed in the Quaternary Sr record. These results further support the suggestions of Jacobson (2004).  相似文献   

17.
The Middle Devonian Winnipegosis carbonate unit in south‐central Saskatchewan is partially to completely dolomitized. Two major types of replacive dolomite are distinguished. Microcrystalline to finely crystalline dolomite (type 1) displays nonplanar‐a to planar‐s textures, mimetically replaces the precursor limestone, accounts for about four‐fifths of dolomite phases volumetrically, and mainly occurs in the Winnipegosis mounds and the Lower Winnipegosis Member directly underlying the mounds. Medium crystalline dolomite (type 2) shows planar‐s to planar‐e textures, commonly occurs in the Lower Winnipegosis and Brightholme members, and decreases upward in abundance. The 87Sr/86Sr ratios of type 1 dolomite (0·70795 to 0·70807) fall within the estimated Sr‐isotopic range for Middle Devonian marine carbonates. Stratigraphic, petrographic and geochemical data constrain the formation of type 1 dolomite to hypersaline sea water in a near‐surface environment, after marine cementation and sub‐aerial diagenesis and prior to precipitation of the Middle Devonian Leofnard salts. Movement of dolomitizing fluids could be driven by density differences and elevation head. The shift to lower δ18O values of type 1 dolomite [?7·4 to ?5·1‰ Vienna Pee Dee Belemnite (VPDB)] is interpreted as the result of recrystallization at elevated temperatures during burial. Type 2 dolomite has higher 87Sr/86Sr ratios (0·70809–0·70928), suggesting that the dolomite probably formed from basinal fluids with an increased richness in the radiogenic Sr isotope. In type 2 dolomite, Sr2+ concentrations are lower, and Fe2+ and Mn2+ concentrations are higher, compared with the associated limestone and type 1 dolomite. Type 2 dolomite is interpreted as having been formed from upward‐migrating basinal fluids during latest Devonian and Carboniferous period.  相似文献   

18.
Neoproterozoic marine dolomite cements represent reliable, albeit complex, archives of their palaeoenvironment. Petrological and high-resolution geochemical data from well-preserved fibrous dolomite and pyrite in the upper Ediacaran (ca 551·1 to 548·0 Ma) Dengying Formation in south-west China are presented and discussed here. The aim of this research is to reconstruct the redox state of late Ediacaran shallow seawater and porewater in the Sichuan Basin using early marine diagenetic fabrics. Based on crystalline texture and axis, four basic types of fibrous dolomite cements formed penecontemporaneously in a microbialite reef setting at the platform margin: (i) bladed dolomites (replacement from a high-Mg calcite precursor); (ii) fascicular fast dolomites (replacement from an aragonitic precursor); (iii) fascicular slow dolomites; and (iv) radial slow dolomites. The latter two fabrics are considered direct marine porewater precipitates due to their length-slow character, cathodoluminescent zonation, and enriched copper and cobalt concentrations. Marine cements yield rare earth element and yttrium patterns comparable to modern seawater and represent a refined set of archive data relative to previously published bulk dolostones. Redox-sensitive elements and cathodoluminescence indicate that the fascicular fast dolomites formed in suboxic seawater, while fascicular slow and radial slow dolomites formed in euxinic marine porewaters. Microbial sulphate reduction during the formation of fascicular slow and radial slow dolomites is recognized by nanometre-scale spheroidal ankerite and sulphur-containing dolomite, and intergrown pyrite grains with U-shaped δ34S transects. Data shown here suggest predominantly suboxic shallow late Ediacaran seawater and euxinic marine porewaters, with microbial activity promoting the direct precipitation of dolomite.  相似文献   

19.
Limestone consisting of finely to medium crystalline calcite mosaics is present in the upper part of the Winnipegosis Formation on the east‐central margin of the Elk Point Basin where the overlying Prairie Evaporite deposits have been removed. This type of crystalline limestone is interpreted as dedolomite, based on petrographic observations. The δ18O and δ13C values of the Winnipegosis dedolomite vary from ?12·8‰ to ?11·9‰ VPDB (Vienna Pee Dee Belemnite) and from ?0·5‰ to +1·7‰ VPDB, respectively; both values are significantly lower than those for the corresponding dolomite. The 87Sr/86Sr ratios of the dedolomite are significantly higher, between 0·7082 and 0·7087. The spatial distribution and geochemical data of the Winnipegosis dedolomite suggest that dedolomitization was related to an influx of fresh groundwater and dissolution of the Prairie Evaporite anhydrite during the latest Mississippian to the Early Cretaceous when the basin was subjected to uplift and erosion. The Winnipegosis dedolomite displays a series of replacement fabrics showing progressive calcitization of dolomite, including the occurrence of dedolomite restricted along fractures and adjacent areas, dolomite patches ‘floating’ in the dedolomite masses and massive dedolomite with sparsely scattered dolomite relicts. However, the characteristic fabrics resulting from dedolomitization documented in the literature have not been observed in the Winnipegosis dedolomite. Coarsely to very coarsely crystalline, subhedral to euhedral calcite cement is restricted in the dedolomite. The petrographic features, isotopic compositions and homogenization temperatures, coupled with the burial history of the Winnipegosis Formation, constrain the precipitation of the calcite cement from a mixing of basinal brines and fresh groundwater during Late Cretaceous to Neogene time. The more negative C‐isotopic signatures of the calcite cement (?5·3‰ to ?2·3‰ VPDB) probably reflect a hydrocarbon‐derived carbon.  相似文献   

20.
Authigenic calcite and dolomite and biogenic aragonite occur in Holocene pan sediments in a Mediterranean‐type climate on the western coastal plain of South Africa. Sediment was analysed from a Late Pleistocene coastal pan at Yzerfontein and four Holocene inland pans ranging from brackish to hypersaline. The pans are between 0·08 and 0·14 km2 in size. The δ18OPDB values of carbonate minerals in the pan sediments range from ?2·41 to 5·56‰ and indicate precipitation from evaporative waters. Covariance of total organic content and percentage carbonate minerals, and the δ13CPDB values of pan carbonate minerals (?8·85 to ?1·54‰) suggest that organic matter degradation is a significant source of carbonate ions. The precipitation of the carbonate minerals, especially dolomite, appears to be mediated by sulphate‐reducing bacteria in the black sulphidic mud zone found in the brine‐type hypersaline pans. The knobbly, sub‐spherical texture of the carbonate minerals suggests that the precipitation of the carbonate minerals, particularly dolomite, is related to microbial processes. The 87Sr/86Sr ratios of pan carbonate minerals (0·7108 to 0·7116) are slightly higher than modern sea water and indicate a predominantly sea water (marine aerosol) source for calcium (Ca2+) ions with relatively minor amounts of Ca2+ derived from the chemical weathering of bedrock.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号