共查询到20条相似文献，搜索用时 31 毫秒
1.
利用布设于兴蒙造山带诺敏河火山群地区的宽频带流动地震台站资料,基于接收函数方法,获取了该地区的地壳厚度与波速比值.研究结果显示,该地区的地壳厚度介于32~38 km,莫霍面深度在空间上分布特征与五大连池为中心的火山带分布具有较好的一致性：沿着火山带延展方向地壳较薄.该地区的波速比介于1.74~1.84,波速比在空间上与地壳厚度变化具有一致性：高波速比主要集中于靠近五大连池火山带地区,向诺敏河火山和小古里河火山延展.研究认为：诺敏河火山与五大连池火山带可能具有相同的岩浆来源,可能与富钾岩石圈地幔拆沉作用造成的地幔热物质上涌有关.研究区地壳厚度与波速比呈现负相关关系,暗示该地区可能发生过岩浆底侵作用. 相似文献
2.
Nishinoshima, a submarine volcano in the Ogasawara Arc, approximately 1 000 km south of Tokyo, Japan, suddenly erupted in November 2013, after 40 years of dormancy. Olivine‐bearing phenocryst‐poor andesites found in older submarine lavas from the flanks of the volcano have been used to develop a model for the genesis of andesitic lavas from Nishinoshima. In this model, primary andesite magmas originate directly from the mantle as a result of shallow and hydrous melting of plagioclase peridotites. Thus, it only operates beneath Nishinoshima and submarine volcanoes in the Ogasawara Arc and other oceanic arcs, where the crust is thin. The primary magma compositions have changed from basalt, produced at considerable depth, to andesite, produced beneath the existing thinner crust at this location in the arc. This reflects the thermal and mechanical evolution of the mantle wedge and the overlying lithosphere. It is suggested that continental crust‐like andesitic magma builds up beneath submarine volcanoes on thin arc lithosphere today, and has built up beneath such volcanoes in the past. Andesites produced by this shallow and hydrous melting of the mantle could accumulate through collisions of plates to generate continental crust. 相似文献
3.
Analytical results of the relative and absolute abundance of LIL-incompatible trace elements (K, Rb, Cs, Sr, and Ba) and isotopic compositions (
,
, and
) are summarized for fresh samples from active and dormant volcanoes of the Volcano and Mariana island arcs. The presence of thickened oceanic crust (T 15–20 km) beneath the arc indicates that while hybridization processes resulting in the modification of primitive magmas by anatectic mixing at shallow crustal levels cannot be neglected, the extent and effects of these processes on this arc's magmas are minimized. All components of the subducted plate disappear at the trench. This observation is used to reconstruct the composition of the crust in the Wadati-Benioff zone by estimating proportions of various lithologies in the crust of the subducted plate coupled with analyses from DSDP sites. Over 90% of the mass of the subducted crust consists of basaltic Layers II and III. Sediments and seamounts, containing the bulk of the incompatible elements, make up the rest. Bulk Western Pacific seafloor has
, δ 18O +7.2, K/Rb 510, K/Ba 46, and K/Cs 13,500. Consideration of trace-element data and combined
systematics limits the participation of sediments in magmagenesis to less than 1%, in accord with the earlier results of Pb-isotopic studies. Combined
data indicate little, if any, involvement of altered basaltic seafloor in magmagenesis. Perhaps more important than mean isotopic and LIL-element ratios is the restricted range for lavas from along over 1000 km of this arc. Mixtures of mantle with either the subducted crust or derivative fluids should result in strong heterogeneities in the sources of individual volcanoes along the arc. Such heterogeneities would be due to: (1) gross variations of crustal materials supplied to the subduction zone; and (2) lesser efficiency of mixing processes accompanying induced convection between arc segments (parallel to the arc) as compared to that perpendicular to the arc. The absence of these heterogeneities indicates that either some process exists for the efficient mixing of mantle and subducted material parallel to the arc or that subducted materials play a negligible role in the generation of Mariana-Volcano arc melts.Consideration of plausible sources in the mantle indicates that (1) an unmodified MORB-like mantle cannot have generated the observed trace-element and isotopic composition of this arc's magmas, while (2) a mantle similar to that which has produced alkali-olivine basalts (AOB) of north Pacific “hot spot” chains is indistinguishable in many respects spects from the source of these arc lavas. 相似文献
4.
A series of water-deficient partial melting experiments on a low-K tholeiite were carried out under lower crustal P–T–H2 O conditions (900–1200 °C, 0.7–1.5 GPa, 2 and 5 wt% H2 O added) using a piston-cylinder apparatus. With increasing temperature at 1.0 GPa, supersolidus mineral assemblages vary from amphibolitic to pyroxenitic. Garnet crystallizes in the higher pressure runs (> 1.2 GPa). Melt compositions show low-K calc-alkalic trends, and are classified as metaluminous or peraluminous tonalite. These features are similar to the felsic rocks in the Izu–Bonin – Mariana (IBM) arc, for example Tanzawa plutonic rocks. The anatectic origin of Tanzawa tonalites is consistent with geochemical modeling, which demonstrates that the rare earth element (REE) characteristics of Tanzawa plutonic rocks (which represent the middle crust of the IBM arc) can be generated by partial melting of amphibolite in the lower crust (∼ 50% melting at 1050 °C and below 1.2 GPa). Estimated densities of pyroxenitic restites (∼ 3.9 g/cm3 ) after extraction of andesitic melts are higher than that of mantle peridotite beneath the island arc (3.3 g/cm3 ). The high density of the restite could cause delamination of the IBM arc lower crust. Rhyolitic magmas in the IBM arc (e.g. Niijima) could be formed by low degrees of partial melting of the amphibolitic crust at a temperature just above the solidus (10% melting at or below 900 °C). 相似文献
5.
Calc-alkalic chemical trends characteristic of arc volcanic rocks mainly result from three mechanisms which act additively: (1) fractional crystallization involving separation of titanomagnetite; (2) selective concentration of plagioclase phenocrysts and selective depletion of titanomagnetite phenocryst compared with the actually fractionated proportion; and (3) mixing of magmas on continuous fractionation trends. The association of calc-alkalic and tholeiitic trends in a single composite volcano may not represent different fractional crystallization processes or different chemistries of primary magmas, but the calc-alkalic chemical trend can be considered as a mixing trend resulting from mixing of various magmas on associated tholeiitic chemical trends. Chemical variations of most arc volcanic rocks, including calc-alkalic ones, can accordingly be essentially accounted for by the low-pressure fractional crystallization of phenocrystic phases from primary basaltic magmas.Crystallization sequences of arc magmas which are strongly dependent on water content in magmas are deduced from the phenocryst assemblages. The crystallization sequence changes laterally across-arc, suggesting increasing water contents in magmas toward the back-arc side, as is also seen for other incompatible elements such as K and Rb. Systematic differences in the characteristic crystallization sequence are also observed among arcs, roughly correlating with the crustal thickness. Water content in magma, like other incompatible elements, tends to increase with increasing crustal thickness. The variation of incompatible elements including water roughly represents that of the degree of partial melting of the upper mantle, which is broadly controlled by the crustal thickness.The variation of water content indicates that arc magmas are not saturated with water during differentiation to late differentiates such as dacite or rhyolite. This strongly constrains the maximum water contents in primary basaltic magma, at most 2.5 wt.%. This value suggests that magma generation beneath arcs is dependent on dry solidus of peridotite. Diapiric uprise of the hot deeper mantle and associated adiabatic decompression would be necessary for mantle peridotite to attain the temperature as high as dry solidus. Diapirs that begin to rise from the subduction zone may stop at or near the crust-mantle boundary because of the surrounding density change, and their degree of partial melting is roughly controlled by their stopped depth assuming their similar temperature. Across-arc variation is also explained by the stopped depth of diapirs, but is not controlled by crustal thickness. 相似文献
6.
Back-arc basin basalt systematics 总被引：7，自引：0，他引：7
The Mariana, east Scotia, Lau, and Manus back-arc basins (BABs) have spreading rates that vary from slow (<50 mm/yr) to fast (>100 mm/yr) and extension axes located from 10 to 400 km behind their island arcs. Axial lava compositions from these BABs indicate melting of mid-ocean ridge basalt (MORB)-like sources in proportion to the amount added of previously depleted, water-rich, arc-like components. The arc-like end-members are characterized by low Na, Ti and Fe, and by high H2O and Ba/La; the MORB-like end-members have the opposite traits. Comparisons between basins show that the least hydrous compositions follow global MORB systematics and an inverse correlation between Na8 and Fe8. This is interpreted as a positive correlation between the average degree and pressure of mantle melting that reflects regional variations in mantle potential temperatures (Lau/Manus hotter than Mariana/Scotia). This interpretation accords with numerical model predictions that faster subduction-induced advection will maintain a hotter mantle wedge. The primary compositional trends within each BAB (a positive correlation between Fe8, Na8 and Ti8, and their inverse correlation with H2O(8) and Ba/La) are controlled by variations in water content, melt extraction, and enrichments imposed by slab and mantle wedge processes. Systematic axial depth (as a proxy for crustal production) variations with distance from the island arc indicate that compositional controls on melting dominate over spreading rate. Hydrous fluxing enhances decompression melting, allowing depleted mantle sources just behind the island arc to melt extensively, producing shallow spreading axes. Flow of enriched mantle components around the ends of slabs may augment this process in transform-bounded back-arcs such as the east Scotia Basin. The re-circulation (by mantle wedge corner flow) to the spreading axes of mantle previously depleted by both arc and spreading melt extraction can explain the greater depths and thinner crust of the East Lau Spreading Center, Manus Southern Rifts, and Mariana Trough and the very depleted lavas of east Scotia segments E8/E9. The crust becomes mid-ocean ridge (MOR)-like where the spreading axes, further away from the island arc and subducted slab, entrain dominantly fertile mantle. 相似文献
7.
This paper addresses formation of felsic magmas in an intra‐oceanic magmatic arc. New bathymetric, petrologic, geochemical, and isotopic data for Zealandia Bank and two related volcanoes in the south‐central Mariana arc is presented and interpreted. These three volcanoes are remnants of an older andesitic volcano that evolved for some time and became dormant long enough for a carbonate platform to grow on its summit before reawakening as a rhyodacitic volcano. Zealandia lavas are transitional between low‐ and medium‐K and tholeiitic and calc‐alkaline suites. They define a bimodal suite with a gap of 56–58 wt% SiO2; this suggests that mafic and felsic magmas have different origins. The magmatic system is powered by mantle‐derived basalts having low Zr/Y and flat rare earth element patterns. Two‐pyroxene thermometry yields equilibration temperatures of 1000–1100 °C for andesites and 900–1000 °C for dacites. Porphyritic basalts and andesites show textures expected for fractionating magmas but mostly fine‐grained felsic lavas do not. All lavas show trace element signatures expected for mantle and crustal sources that were strongly melt‐depleted and enriched by subduction‐related fluids and sediment melts. Sr and Nd isotopic compositions fall in the normal range of Mariana arc lavas. Felsic lavas show petrographic evidence of mixing with mafic magma. Zealandia Bank felsic magmatism supports the idea that a large mid‐ to lower‐crustal felsic magma body exists beneath the south‐central Mariana arc, indicating that MASH (mixing, assimilation, storage, and homogenization) zones can form beneath intra‐oceanic as well as continental arcs. 相似文献
8.
《Earth and Planetary Science Letters》2003,205(3-4):123-138
A geochemical and isotopic study of lavas from Pichincha, Antisana and Sumaco volcanoes in the Northern Volcanic Zone (NVZ) in Ecuador shows their magma genesis to be strongly influenced by slab melts. Pichincha lavas (in fore arc position) display all the characteristics of adakites (or slab melts) and were found in association with magnesian andesites. In the main arc, adakite-like lavas from Antisana volcano could be produced by the destabilization of pargasite in a garnet-rich mantle. In the back arc, high-niobium basalts found at Sumaco volcano could be produced in a phlogopite-rich mantle. The strikingly homogeneous isotopic signatures of all the lavas suggest that continental crust assimilation is limited and confirm that magmas from the three volcanic centers are closely related. The following magma genesis model is proposed in the NVZ in Ecuador: in fore arc position beneath Pichincha volcano, oceanic crust is able to melt and produces adakites. En route to the surface, part of these magmas metasomatize the mantle wedge inducing the crystallization of pargasite, phlogopite and garnet. In counterpart, they are enriched in magnesium and are placed at the surface as magnesian andesites. Dragged down by convection, the modified mantle undergoes a first partial melting event by the destabilization of pargasite and produces the adakite-like lavas from Antisana volcano. Lastly, dragged down deeper beneath the Sumaco volcano, the mantle melts a second time by the destabilization of phlogopite and produces high-niobium basalts. The obvious variation in spatial distribution (and geochemical characteristics) of the volcanism in the NVZ between Colombia and Ecuador clearly indicates that the subduction of the Carnegie Ridge beneath the Ecuadorian margin strongly influences the subduction-related volcanism. It is proposed that the flattening of the subducted slab induced by the recent subduction (<5 Ma?) of the Carnegie Ridge has permitted the progressive warming of the oceanic crust and its partial melting since ca. 1.5 Ma. Since then, the production of adakites in fore arc position has deeply transformed the magma genesis in the overall arc changing from ‘typical’ calc-alkaline magmatism induced by hydrous fluid metasomatism, to the space- and time-associated lithology adakite/high-Mg andesite/adakite-like andesite/high-Nb basalts characteristic of slab melt metasomatism. 相似文献
9.
A survey of Sr isotopic ratios and other compositional features of subduction-related magma suites reveals significant correlations between these averaged parameters and characteristics of the underlying crust (i.e., thickness, composition, and age). These observations lead to the conclusion that crust and(or) mantle rocks in the hanging walls of subduction zones are involved in modification of primary mafic magmas (typically basalt or basaltic andesite). It is proposed that mafic magmas will stagnate within the crust or uppermost mantle where they may differentiate and react with wall rocks. The extent to which such processes manifest themselves will depend upon details of the local crustal structure. In particular, the composition and age of the crust will strongly influence such parameters as Sr, Nd and Pb isotopic compositions. Such data strongly indicate the involvement of crustal rocks in locales underlain by old sialic crust (e.g., central Andes). Depending upon the level of magma stagnation and evolution within the crust, different trends in isotopic composition may result. These isotopic trends may be enhanced by partial melting of the wall rocks to produce relatively silicic anatectic magmas, and locally they may reflect subduction of continental sediments. Interpretation of the isotopic data may be more ambiguous in locales underlain by younger and more mafic continental crust (Cascades, E Eleutians) and those underlain by oceanic crust owing to the similarity in isotopic composition of primary magmas and the latter crustal materials. Yet some degree of crustal involvement in magmatic evolution seems highly probable even in these more primitive terranes. Consequently, most island arc magmas, and especially those more evolved than basalt, are probably not primary in the sense that they do not represent direct melts of the upper mantle. Studies of arc volcanic rocks may yield misleading conclusions concerning processes of magma generation related to subduction unless evolutionary processes are defined and their effects considered. It appears that modern volcanic arcs provide a poor analog for models of early crustal development because the modern mantle-derived magmatic components are more mafic in composition than average continental crust. 相似文献
10.
Southern limit of mantle-derived geothermal helium emissions in Tibet: implications for lithospheric structure 总被引：10，自引：0，他引：10
Leonore Hoke Simon Lamb David R. Hilton Robert J. Poreda 《Earth and Planetary Science Letters》2000,180(3-4):297-308
The isotopic composition of helium emitted from geothermal springs in the southern Tibetan plateau, reported as Rc/RA (Rc=air corrected sample 3He/4He, RA=air 3He/4He), ranges from 0.013 to 0.38, and defines two principal domains. In southernmost central Tibet, helium isotope ratios are typical of radiogenic helium production in the crust (Rc/RA<0.05, crustal helium domain). Further north, there is a resolvable 3He anomaly consistent with a mantle contribution (R/RA>0.1, mantle helium domain). The highest values of 0.27–0.38 RA occur at the southern end of the Karakoram fault. The boundary between the two domains lies 50–100 km north of the Indus-Zangpo suture zone. There seems to be no association between the 3He anomaly and zones of active normal faulting and litho-tectonic crustal units, such as the ultramafic rocks of the Indus-Zangpo suture zone and the Gangdese intrusive belt. Although scavenging of mantle-derived helium, stored in large ultrabasic and basic intrusions in the crust, cannot be ruled out entirely, we argue that the 3He anomaly most plausibly reflects degassing of volatiles from young (Quaternary) mantle-derived melts intruded into the crust. As such, it defines the southern limit of recent mantle melting and mantle melt extraction beneath the Tibetan plateau. The southern limit of the 3He anomaly coincides with the junction between the Indian and Asian plates, in the region where the Indian lithospheric slab steepens and is subducted beneath Tibet as suggested by seismic studies. Recent mantle melting and melt extraction is confined to the Asian mantle, but the southern limit of the melt zone may have migrated northwards during the last 10 Ma as the Indian lithosphere has progressively underthrust the Himalayas and Tibet. 相似文献
11.
腾冲是青藏高原东南缘重要的第四纪火山活动区域,全新世以来的火山主要集中在腾冲盆地的中央,由北向南形成一个串珠状的火山链.为了深入探索这一火山区的深部结构和岩浆活动特征,我们在腾冲北部开展了为期一年的流动地震观测,利用接收函数方法计算了台站下方的地壳厚度、平均波速比和泊松比,研究结果揭示出测线下方地壳结构与岩浆活动及火山分布的对应关系.测线北部7个台站的地壳厚度在35.4~37.6 km之间,平均波速比为1.82~1.92、泊松比为0.28~0.31,其中马站附近莫霍面抬升幅度最大,与相邻地区莫霍面深度相差1~2 km,平均波速比和泊松比也达到最大值.相比之下,测线南端两个台站的地壳厚度接近40 km,平均波速比和泊松比仅为1.61~1.64和0.18~0.20,与测线北部7个台站的地壳结构相差甚大.分析表明地幔上涌对火山区莫霍面的局部抬升产生了一定影响,火山湖、黑空山、大-小空山和打鹰山下方应该存在一个相互联通的壳内岩浆囊.该岩浆囊在南北方向上的尺度约为20 km,热流活动以及幔源物质的侵入是地壳平均波速比和泊松比偏高的主要原因,它与热海附近的地温异常区分属两个不同的壳内岩浆存储系统. 相似文献
12.
E. Takahashi 《Bulletin of Volcanology》1978,41(4):529-547
Mafic and ultramafic xenoliths, in the Holocene calc-alkali andesite of Ichinomegata(1) crater in Oga peninsula and those in the Plio-Pleistocene alkali-olivine basalts of Oki-Dōgo island in the Japan Sea, have been studied in detail. Based on geothermometry and geobarometry, and relative abundance of the rock types of the xenoliths, petrologic models of the crust and upper mantle beneath these two areas were constructed. The crust and upper mantle beneath Ichinomegata crater are characterized by hydrous and relatively low temperature conditions. On the other hand, the crust and upper mantle beneath Oki-Dōgo island are characterized by nearly anhydrous and high temperature conditions, and presence of thick lavers of peridotite and pvroxenite cumulates in the uppermost mantle. The crust and upper mantle of the western part of the Northeast Honshū Arc can be considered as similar to those beneath Ichinomegata crater, because of the common occurrence of similar mafic xenoliths from many andesite volcanoes in this area. The crust and upper mantle of the northern part of the Southwest Honshū Arc, in the same way, can be regarded as similar to those beneath Oki-Dōgo island. Differences in amount of hydrous minerals of deep-seated rocks between the two areas can be interpreted as due to the presence of migrating water derived from the subducting Pacific plate in the Northeast Honshū Arc. Difference in slope of the geotherm may be due to the difference in temperature of the partial melt zones beneath these two areas. Bulk chemical compositions of the lower crustal materials of the Japanese island arcs, 85 mafic inclusions from 15 volcanoes, are listed, and it is concluded that they are cumulates or metamorphosed cumulates in the lower crust. 相似文献
13.
《Journal of Volcanology and Geothermal Research》2003,119(1-4):21-50
The major and trace element geochemistry of lavas erupted from four volcanic front (VF) stratovolcanoes in southeastern Guatemala show differences in the relative importance of flux and decompression melting in a continental arc setting. The VF stratovolcanoes exhibit a wide compositional range from basalt to dacite, although modern Pacaya erupts basaltic lavas. The VF basalts have relatively low MgO contents and plot outside the field of primary arc magmas defined by melting experiments on hydrous peridotite. After subtracting the effects of the fractionation, assimilation, and alteration of some VF lavas, separate partial melting and mixing trends were identified for Agua–Pacaya and Tecuamburro–Moyuta.The distinct chemical signatures of the hemipelagic and carbonate sediments subducted off Guatemala provide constraints on material transfer processes that occurred between the slab and mantle wedge. Model fluids and melts from the subducted slab were calculated using recently published mineral–aqueous fluid partition coefficients. Wide separation of the model fluid and melt compositions on a U/La versus Ba/Th diagram creates diagnostic mixing curves with an enriched mid-ocean ridge basalt source. Fluid from mature ocean crust has high U/La, fluid from carbonate sediment has high Ba/Th, and fluid and melt from hemipelagic sediments have both high U/La and Ba/Th. In a simple single-stage model, a mantle metasomatized by fluid originating largely from the oceanic crust with only minor sediment fluid contributions best explains the overall large ion lithophile element composition of the VF lavas. (Th/Rb)N ratios of ∼1 in the VF lavas from southeastern Guatemala require a component of sediment melting. Therefore, a more realistic two-stage model to describe the Guatemalan arc data involves an initial hemipelagic sediment melt input to the wedge followed by minor fluid additions from the oceanic crust or sediments. Correlation between measures of slab input and extent of melting in the older VF lavas from Tecuamburro and Moyuta favors flux-dominated melting near the base of the mantle wedge. In sharp contrast, the lack of a relationship between slab additions and melting in younger lavas from Agua and Pacaya volcanoes implies a significant role for decompression melting closer to the top of the wedge. In this melting scenario, the rate of crustal extension determines the extent of melting. 相似文献
14.
在喜马拉雅造山带的东缘,雅鲁藏布江缝合带在这里发生急剧转折,南迦巴瓦变质体快速隆起,然而关于东构造结的形成机制一直未有定论.利用围绕南迦巴瓦峰的48个宽频带地震台站记录的远震数据提取P波接收函数,采用改进的H-κ叠加方法和共转换点叠加方法综合研究了东构造结的地壳厚度、波速比分布和地壳结构特征.结果表明:研究区平均地壳厚度为64.03 km,大部分台站介于60.48~66.55 km范围;平均波速比为1.728,主要集中范围为1.696~1.742.东构造结地壳厚度横向变化剧烈,构造结西端和北端厚而中间薄,东构造结核部Moho面呈现上隆的构造形态,东西向上隆幅度约为6~7 km,南北向的上隆超过9~10 km.东构造结核部地壳上隆减薄可能由高密度、高波速的岩石圈撕裂残片拆沉到上地幔软流圈后重力失衡所致.平均波速比超过1.8的高值异常展布于东构造结的两侧,推测为环东构造结的壳内部分熔融体.东构造结地壳上隆减薄和壳内部分熔融的存在很可能均与幔源热物质的上涌有关,而软流圈地幔的上涌则可能由印度板片的撕裂引起. 相似文献
15.
利用架设在我国东北地区阿尔山火山区的宽频带流动地震台站记录的远震波形数据,采用P波接收函数H-κ叠加扫描方法,得到了阿尔山火山区的地壳厚度和平均波速比。结果显示:阿尔山地区的地壳厚度范围为33.9—37.9 km,整体呈西北厚东南薄的特点,火山带附近地壳较薄;地壳平均波速比范围为1.73—1.83,主要有柴河镇—明水河镇、伊敏德仁北部和天池镇三处高波速比区。结合前人研究结果推断, 阿尔山火山区薄的地壳和高波速比值可能是由地幔物质上涌、玄武岩浆底侵下地壳所致。 相似文献
16.
J.T. Caulfield S.P. Turner A. Dosseto N.J. Pearson C. Beier 《Earth and Planetary Science Letters》2008,273(3-4):279-288
The fluid immobile High Field Strength Elements (HFSE) Nb and Ta can be used to distinguish between the effects of variable extents of melting and prior source depletion of the Tongan sub-arc mantle. Melting of spinel lherzolite beneath the Lau Basin back-arc spreading centres has the ability to fractionate Nb from Ta due to the greater compatibility of the latter in clinopyroxene. The identified spatial variation in plate velocities and separation of melt extraction zones, combined with extremely depleted lavas make Tonga an ideal setting in which to test models for arc melt generation and the role of back-arc magmatism.We present new data acquired by laser ablation-ICPMS of fused sample glasses produced without the use of a melt fluxing agent. The results show an arc trend towards strongly sub-chondritic Nb/Ta (< 17) with values as low as 7.2. Melting models show that large degree melts of depleted MORB mantle fail to reproduce the observed Nb/Ta. Alternatively, incorporation of residual back-arc mantle that has undergone less than 1% melting into the sub-arc melting regime reproduces arc values. However, the extent of partial melting required to produce the composition of the Lau Basin back-arc basalts averages 7%. This apparent discrepancy can be explained if only the lowermost 4 km of the residua from the mantle melt column beneath the back-arc is added to the source of arc magmas. We have identified that the degree of arc/back-arc coupling displayed in the rock record provides an index of the depth of hydrous melting beneath the arc. In this case, this would imply a depth of ~ 75 km for generation of arc magmas, indicating that hydrous melting in the mantle wedge is triggered by the breakdown of hydrous phases in the subducting slab. 相似文献
17.
Robert W. Decker 《Bulletin of Volcanology》1965,28(1):231-256
Active volcanoes occur in at least two fundamentally different tectonic settings. Taphrogenic volcanoes are aligned along the mid-ocean fracture system which is characterized by a broad ridge of rugged relief, «tensional» horizontal stress components perpendicular to the ridge, shallow earthquakes in a zone vertically beneath the ridge crest, thin to normal occanic crust and low to normal seismic velocities in the uppermost mantle, positive free-air gravity anomalies, and high heat flow. Orogenic volcanoes are aligned along the mobile Pacific rim and Indonesian archipelago which are characterized by double or single arcuate ridges with a deep oceanic trench on the convex side, compressional horizontal stress components perpendicular to the arcs, shallow to deep earthquakes in a zone dipping from the trench to beneath the volcanoes and beyond, transitional crustal thicknesses and seismic velocities, parallel belts of negative and positive free-air gravity anomalies from the trench to the volcanic arc, and low heat flow from the trench. The diverse nature of most geophysical lineaments associated with volcanism suggests that magma generation is independent of these phenomena. The remaining correlation of shallow earthquakes with taphrogenic volcanocs and intermediate depth earthquakes with orogenic volcanoes suggests that active fracture systems reaching these depths can tap latent magma sources. Seismic evidence for a low velocity layer beginning 100 km beneath continents and 60 km beneath oceans gives independent support to this hypothesis. 相似文献
18.
An association of adakite, magnesian andesite (MA), and Nb-enriched basalt (NEB) volcanic flows, which erupted within ‘normal’ intra-oceanic arc tholeiitic to calc-alkaline basalts, has recently been documented in ∼2.7 Ga Wawa greenstone belts. Large, positive initial ?Nd values (+1.95 to +2.45) of the adakites signify that their basaltic precursors, with a short crustal residence, were derived from a long-term depleted mantle source. It is likely that the adakites represent the melts of subducted late Archean oceanic crust. Initial ?Nd values in the MA (+0.14 to +1.68), Nb-enriched basalts and andesites (NEBA) (+1.11 to +2.05), and ‘normal’ intra-oceanic arc tholeiitic to calc-alkaline basalts and andesites (+1.44 to +2.44) overlap with, but extend to lower values than, the adakites. Large, tightly clustered ?Nd values of the adakites, together with Th/Ce and Ce/Yb systematics of the arc basalts that rule out sediment melting, place the enriched source in the sub-arc mantle. Accordingly, isotopic data for the MA, NEBA, and ‘normal’ arc basalts can be explained by melting of an isotopically heterogeneous sub-arc mantle that had been variably enriched by recycling of continental material into the shallow mantle in late Archean subduction zones up to 200 Ma prior to the 2.7 Ga arc. If the late Archean Wawa adakites, MA, and basalts were generated by similar geodynamic processes as their counterparts in Cenozoic arcs, involving subduction of young and/or hot ocean lithosphere, then it is likely that late Archean oceanic crust, and arc crust, were also created and destroyed by modern plate tectonic-like geodynamic processes. This study suggests that crustal recycling through subduction zone processes played an important role for the generation of heterogeneity in the Archean upper mantle. In addition, the results of this study indicate that the Nd-isotope compositions of Archean arc- and plume-derived volcanic rocks are not very distinct, whereas Phanerozoic plumes and intra-oceanic arcs tend to have different Nd-isotopic compositions. 相似文献
19.
—We investigate the distribution of partial melt in island arc using the seismic velocity structure of the mantle wedge beneath northeastern Japan. The comparison of the seismic tomography with laboratory velocity data on a partially-molten mantle rock yields estimates of melting zones in three dimensions. We employ experimental data on the degree of partial melt in hydrous peridotite to give constraints on the melt fraction and temperature. Melting and magma-rich zones derived from the velocity structure coincide with observed low Q zones. The results of the three-dimensional mapping indicate that the source of magma in island arc is diapir-like melting patches localized within the low velocity zones of the mantle wedge. Extensive volcanic activity along the volcanic front is due to the presence of vast magma-rich zones just beneath the Moho. Those melting zones in the uppermost mantle may, in turn, cause melting of lower crustal materials and produce felsic magma. Melt appears to stay at and beneath the Moho, where crystallization fractionation may proceed. Melt exists at greater depths in the back-arc region, which may correlate with across-arc variations of chemical compositions of the volcanic rocks observed in northeastern Japan. We suggest that magma migration in the ductile lower crust may cause low-frequency microearthquakes, and magma penetration into the brittle upper crust may produce mid-crustal S-wave reflectors. 相似文献
20.
Scott B. Smithson Roy A. Johnson Yun K. Wong 《Earth and Planetary Science Letters》1981,53(3):323-332
Mean crustal velocity is a critical parameter for genesis of continental crystalline crust because it is a function of mean crustal composition and therefore may be used to resolve continental crustal growth in space and time. Although the best values of mean crustal velocity are determined from wide-angle reflection measurements, most studied here necessarily come from vertical averages in crustal refraction determinations. The mode of 158 values of mean crustal velocity is 6.3 km/s, a velocity which corresponds to a mean crustal composition of granodiorite to felsic quartz diorite; Archean crust may be slightly more mafic. Mean crustal velocities range from 5.8 to 7.0 km/s. The lowest values invariably are found in thermally disturbed rift zones and the highest values correspond to velocities in gabbro. Velocities in island arcs may be as low as 6.0 km/s but are typically 6.5–6.9 km/s which corresponds to andesitic composition; estimates of island arc composition are andesitic. If values of mean crustal velocity are not biased, this observation suggests that continental crust did not grow simply by addition of island arc material. Possibilities are that crust formed from fusion of island arcs and was later changed to more felsic composition by addition of material from the mantle or that the late Archean episode of major crustal growth did not involve processes similar to younger island arcs. Some crustal blocks might be changed in composition and thickness by such processes as underplating, interthrusting, necking and sub-crustal erosion. Specially designed experiments are suggested to determine this parameter so critical for understanding genesis of continental crust. 相似文献