共查询到20条相似文献，搜索用时 31 毫秒
1.
Marginal basins, areas of oceanic lithosphere peripheral to large ocean basins, may be formed by several processes, but the young active marginal basins have the geophysical and geochemical characteristics of young normal oceanic lithosphere. We recognize two distinct tectonic settings in which new oceanic lithosphere may be formed in areas which would be termed marginal basins:
- 1. (1) Upwelling of fractional melts of mantle material from the region above subducted lithospheric slabs leads to the generation of new oceanic lithosphere behind island arcs. The general case for this tectonic setting involves random location of magma leaks and does not produce correlatable magnetic anomalies. In special cases, an orthogonal ridge—transform system may duplicate the magnetic patterns found on ocean-basin crust.
- 2. (2) The second tectonic setting develops on very long “leaky” transform faults separating spreading ridges. In areas where the transform has dislocated a block of continental crust, or an island arc, the map view of the resulting marginal basin may resemble the setting of a basin behind an active island arc. However, the “leaky” transform setting is unrelated to active plate convergence or to Benioff zones.
2.
A.J. Vroman 《Tectonophysics》1976,30(1-2)
The offsets on the ocean floor, usually called “transform-faults” are not shear faults common in solid Hookian rocks, but reflect the viscous Newtonian properties of laminar flow at the time when the upwelling magma along the spreading center was still in a liquid state. During spreading this liquid is carried away with the walls of the spreading center. This movement creates a pattern of stream lines in the liquid which run parallel to the direction of spreading. “Transform faults” are initiated along zones where a larger rate of shear disturbs the process of solidification. Consequently the strength of the basalt after solidification will be impaired along these zones. These weak zones will fracture under the thermo-elastic stresses during the final stage of cooling.The history of the term “transform fault” is discussed and the name “spreading offset” is proposed. 相似文献
3.
Subduction zones with deep seismicity are believed to be associated with the descending branches of convective flows in the mantle and are subordinated to them. Therefore, the position of subduction zones can be considered as relatively fixed with respect to the steady-state system of convective flows. The lithospheric plate overhanging a subduction zone (as a rule of continental type) may:
- 1. (1) either move away from the subduction zone; or
- 2. (2) move onto it. In the first case extensional conditions originate behind the subduction zone and the new oceanic crust of back-arc basins forms. In the second case active Andean-type continental margins with thickening of the crust and lithosphere are observed.
4.
The Arabian Shield is divided into several segments by ophiolite zones. The segments display features of island arcs with respect to their magmatic evolution as well as their mineralization.The northern part of the “Hulayfah—Hamdah ophiolite belt” which cuts the Arabian Shield in a north—southerly direction, has been sampled and described. Serpentinized ultramafics, gabbros, doleritic dike rocks and basalts are the most important members. The ophiolite belt is marked by magnetic anomalies with amplitudes of 200–500 gammas.In conclusion, the Arabian Shield is considered to be built up of several generations of juxtaposed volcanic arcs of Late Proterozoic age. The arcs have been closely swept together squeezing out the trench-fill sediments in the case of the Hulayfah—Hamdah belt. Cratonization was completed by the end of the Precambrian. 相似文献
5.
Metapelite-derived migmatites (“bedded migmatites”) formed in the low-pressure/high-temperature (LPHT) Cooma Complex, southeastern Australia, contain magma (neosome and leucosome) confined to the metapelitic beds in which they were generated. The metapsammitic beds were more ductile than the metapelitic beds (and the metapelitic parts of graded beds), which underwent fracture and boudinage, thereby providing space for the magma, though some also occurs in axial surface folia. Transitions from bedded to stromatic migmatites can be seen, but the magma mainly remained in the metapelites, even in the most strongly deformed stromatic migmatites. This, together with boudinage and transposition of the leucosome, as well as microstructural evidence of quartz recrystallization, suggest that much or most of the stromatic layering was formed by solid-state deformation. In contrast, magmas (neosomes) formed by partial melting of feldspathic metapsammites at Cooma moved out of their parent rocks, and coalesced into veins and small intrusions of diatexite, because (1) the host rocks deformed more homogeneously, and no interboudin space was made for the melts, and (2) the melt escape threshold was exceeded, probably with the assistance of deformation. Metapsammite melting occurred after solidification of the metapelite-derived magma, and the mobile metapsammite-derived magma (diatexite) disrupted and incorporated fragments of the metapelitic migmatites. The metapsammite-derived magma, together with this solid metapelitic material, locally coalesced into bodies closely resembling the Cooma Granodiorite. 相似文献
6.
Generally, the lack of bedding criteria in basement units hampers the interpretation of paleomagnetic results in terms of geotectonics. Nevertheless, this work demonstrates that successive remagnetizations recorded in Early Carboniferous metamorphic and plutonic units, without clear bedding criteria, can be used to constrain a polyphased tectonic evolution consisting of a regional clockwise rotation, followed by a folding phase, a tilting phase and a second regional clockwise rotation.Metamorphic, ultrabasic, tonalitic and granitic rocks from different parts of Limousin (western French Massif central; 45.5°N/1.25°E), which underwent metamorphism during Devonian–Early Carboniferous or were intruded in the Early–Middle Carboniferous, were sampled in order (a) to identify the magnetic overprinting phases and the related tectono-magmatic events and (b) to constrain the regional and plate tectonic evolution of Limousin. Paleomagnetic results from 32 new and 26 sites investigated previously show that at least 90% of the magnetization isolated in rocks older than 330 Ma are overprints. In agreement with results from adjacent areas of the Variscan belt, the major overprinting phases occurred: (a) in the last stages of the major exhumation phase [332–328 Ma; mean Virtual Geomagnetic Pole (VGP) “Cp”: 37°N/70.5°E], (b) during the post-collisional syn-orogenic extension (325–315 Ma; VGP “B”: 11°N/114°E), (c) in the Latest Carboniferous and Early Permian (VGP “A1”: 27°N/149°E) and (d) in the Late Permian (VGP “A”: 48°N/146°E). The Middle–Late Carboniferous overprints “Cp” and “B” are contemporaneous with emplacement of leucogranitic, crustal derived plutons, and probably result from the hydro-thermal activity related to the magmatism. The drift from “Cp” directions to “B” directions implies that after 330 Ma, Limousin underwent a clockwise rotation by 65°, together with the Central Europe Variscides. The “Bt” components, the VGPs of which deviate from the mean apparent polar wander path (APWP) of the belt, are interpreted as “B” overprints tilted during Late Variscan tectonics, that is, in the time range 325–315 Ma. The first and most important generation of “Bt” overprints was tilted during NW–SE folding associated with NE–SW shortening, updoming and emplacement of leucogranitic plutons. The second generation reveals southeastward tilting due to NE-striking normal faulting. The drift from “B” to “A1” directions implies that Limousin has participated to the second clockwise rotation by 40° of the whole belt in Westphalian times. 相似文献
7.
Deposits of the “porphyry” family (essentially porphyry copper and gold-porphyry copper, gold-bearing porphyry molybdenum-copper, gold-containing porphyry copper-molybdenum and porphyry molybdenum deposits) are associated in time and space with granitoid magmatism mainly in Phaerozoic volcano-plutonic belts. Whatever their age, the deposits belong to two types of belts: basaltic belts, representing axial zones of island arcs, or andesitic belts formed within active continental (Andean-type) margins.The petrochemistry of ore-bearing magmatism related to the nature of the substratum of volcano-plutonic belts, reveals a number of essential characteristics, both in composition and zonation of wallrock alteration and ore mineralization. These characterisics enabled previous researchers to establish four models of porphyry copper deposits based on their lithologic associations, e.g., “diorite”, “granodiorite”, “monzonite” and “granite”.Pophyry copper deposits are thought to be the product of self-generating “two-fluid mixing” ore-magmatic systems. Porphyry intrusions are pathways for energy and metals from deep-seated magma chambers, of which the upper mineralized parts are accessible for observation. The relationship between magmatic fluids and meteoric water participating in the ore-forming processes (dependent on the structural-petrophysical conditions of formation), provide a subdivision for the porphyry copper ore-magmatic systems into three types: “open”, “closed” and “transitional”.Concurrently, a common trend in the evolution of the systems has been established, from a nearly autoclave regime of structural-and ore-forming processes to a gradual increase in the importance of hydrothermal recycling. The completeness of the OMS (ore-magmatic system) development according to this scheme, which determines the existence of various OMS types, depends on many factors, the most important being the depth of formation of porphyry intrusive bodies, the petrophysical peculiarities of the host rocks and the palaeohydrogeological conditions of ore deposition.Although rock fracturing (especially defluidization: second boiling) and contraction are caused by the same mechanisms, the stockwork growth in “open” and “closed” systems, relative to the wall rock, takes place in opposite directions, primarily due to different petrophysical parameters of the near-stock environment.In “open” systems structural and ore metasomatic processes are finalized. Fractures extend progressively from porhyry stocks into the marginal parts of the intrusive framework and extension of large-scale recycling of magmatic and activated meteoric water, in the same direction, result in the formation of ore-bearing stockworks. These are large in all dimensions, cover mainly hanging-wall zones and are characterized by clearly defined concentric mineral zoning and extensive geochemical haloes.In a “closed” OMS with centripetal growing fractures, hydrothermal convection is stunted. The vertical extension of recycling cells is restricted and the volume of meteoric water involved in circulation during the period of ore deposition is relatively small. As a result, relatively small intra-intrusive lenticular stockworks are developed which are characterized by close co-existence of several generations of mineralization with fragmentary preservation of the earliest ones. These are characterized by the elements of “reverse” zoning, increased density of the veinlets and metal content, as well as poorly developed hanging-wall dispersion haloes. 相似文献
8.
Yusheng Wan Dunyi Liu Meihui Xu Jianmin Zhuang Biao Song Yuruo Shi Lilin Du 《Gondwana Research》2007,12(1-2):166
Northwestern Fujian Province is one of the most important Pre-Palaeozoic areas in the Cathaysia Block of South China. Metavolcano-sedimentary and metasedimentary rocks of different types, ages and metamorphic grades (granulite to upper greenschist facies) are present, and previously were divided into several Formations and Groups. Tectonic contacts occur between some units, whereas (deformed) unconformities have been reported between others. New SHRIMP U–Pb zircon ages presented here indicate that the original lithostratigraphy and the old “Group” and “Formation” terminology should be abandoned. Thus the “Tianjingping Formation” was not formed in the Archaean or Palaeoproterozoic, as previously considered, but must be younger than its youngest detrital zircons (1790 Ma) but older than regional metamorphism (460 Ma). Besides magmatic zircon ages of 807 Ma obtained from metavolcano-sedimentary rocks of the “Nanshan Formation” and 751–728 Ma for the “Mamianshan Group”, many inherited and detrital zircons with ages ranging from 1.0 to 0.8 Ga were also found in them. These ages indicate that the geological evolution of the study area may be related to the assembly and subsequent break-up of the Rodinia supercontinent. The new zircon results poorly constrain the age of the “Mayuan Group” as Neoproterozoic to early Palaeozoic (728–458 Ma), and not Palaeoproterozoic as previously thought. Many older inherited and detrital zircons with ages of 3.6, 2.8, 2.7, 2.6–2.5, 2.0–1.8 and 1.6 Ga were found in this study. A 3.6 Ga detrital grain is the oldest one so far identified in northwestern Fujian Province as well as throughout the Cathaysia Block. Nd isotope tDM values of eight volcano-sedimentary and clastic sedimentary rock samples centre on 2.73–1.68 Ga, being much older than the formation ages of their protoliths and thus showing that the recycling of older crust played an important role in their formation. These rocks underwent high grade metamorphism in the early Palaeozoic (458–425 Ma) during an important tectono-thermal event in the Cathaysia Block. 相似文献
9.
A theory of two-dimensional geothermic problems is elaborated by the active temperature function at the vertical contact of two horizontally layered media. The approach offered before for oceanic ridges is extended to the case of continental margins and the upper part of a descending slab, i.e. “sink”, in island-arc areas. It is assumed that the plate motion in the oceanic area exists; in a descending area it is directed downward but remains zero on a continental side. Mathematically it symbolizes a “source—span—sink” thermal model. Numerical parameters are given for a theoretical thermal model of the heat-flow profile across the Kuril island arc, from the trench through Iturup Island, Sakhalin Island and the Tatarian Trough. 相似文献
10.
Review of Microstructural Evidence of Magmatic and Solid-State Flow 总被引：13，自引：0，他引：13
R.H. Vernon 《Visual Geosciences》2000,5(2):1-23
Evidence of magmatic flow includes: (a) parallel to sub-parallel alignment of elongate euhedral crystals (e.g., of feldspar or hornblende) that are not internally deformed, (b) imbrication (‘tiling’) of elongate euhedral crystals that are not internally deformed, (c) insufficient solid-state strain in regions between aligned or imbricated crystals to accommodate phenocryst rotation, (d) elongation of microgranitoid enclaves without plastic deformation of the minerals, (e) magmatic flow foliations and elongate microgranitoid enclaves deflected around xenoliths, and (f) schlieren layering (if due to flow sorting) in the absence of plastic deformation of the minerals involved. These features are consistent with rotation of crystals in a much weaker medium, namely a melt phase, at a stage when the magma has become viscous enough to preserve the alignment.Evidence of solid-state flow includes: (a) internal deformation and recrystallization of grains, (b) recrystallized “tails,” (c) elongation of recrystallized aggregates (e.g. of quartz and mica), (d) grainsize reduction, (e) fine-grained folia anastomosing around less deformed relics, (f) microcline twinning, (g) myrmekite, (h) flame perthite, (i) boudinage of strong minerals, typically with recrystallized aggregates of weaker minerals (e.g. quartz and mica) between the boudins, (j) foliation passing through, rather than around enclaves, and (k) heterogeneous strain with local mylonitic zones.Several criteria suggest “submagmatic flow,” including recrystallized feldspar, inferred transitions from magmatic imbrication to solid-state S/C arrangements, evidence of c-slip in quartz, and especially evidence of migration of residual melt into lower-pressure sites.Recent experimental studies indicate that a change from grain-supported flow to suspension flow typically occurs in deforming magmas at melt contents of between 20% to 40%, and that large amounts of strain may accumulate in magmas without being recorded by the final fabric. At lower melt percentages, perhaps as low as a few percent, depending on the minerals and their shapes, strain may be accommodated by: (a) melt-assisted grain-boundary sliding, (b) contact-melting assisted grain-boundary migration, (c) strain partitioning into melt-rich zones, (d) intracrystalline plastic deformation (c-slip in quartz indicating plastic deformation at temperatures near the granite solidus), and (f) transfer of melt to sites of low mean stress. The only indication of strain in the absence of crystal plasticity may be an alignment of crystals. Moreover, magmatic flow microstructures may be destroyed by fracturing, crystal plasticity and recrystallization before the magma reaches its solidus.Many rocks show evidence of solid-state flow superimposed on magmatic flow. Evidence of magmatic flow is commonly preserved in deformed felsic metamorphic rocks: for example the alignment of rectangular K-feldspar megacrysts and of microgranitoid enclaves. However, absence of alignment does not preclude a magmatic origin for K-feldspar megacrysts in felsic gneisses, as magmatic flow may cease before the magma becomes viscous enough to preserve an alignment. 相似文献
11.
12.
Numerous observations on mafic–ultramafic layered intrusions, sills and dykes show that chilled margins always develop as an integral part of their marginal reversals and possess the following features: (a) they are commonly much more evolved or primitive than bulk intrusion compositions, (b) evolved chilled margins are composed of the low temperature cotectic assemblages of relevant magmatic systems and (c) tend to be compositionally similar in intrusions formed from different parental magmas, (d) fine-grained chilled margins are notably absent in many intrusions, with contact rocks being represented by medium- to coarse-grained cumulates. The anomalous features of chilled margins can be partly attributed to contamination, intratelluric inhomogeneity of magma, changes in composition of intruding magma, loss of magma from the chamber, supercooling, etc. A major process still remains, however, illusive, but appears to be universally operating along the cooling margins of magmatic bodies in a liquid state, being gravity-independent and temperature gradient-driven. We recognize this not yet specified process as Soret fractionation and explain the above observations in the following way. Primary chilled margins do not commonly survive because of intensive remelting by heat flux from the interior of the chamber. The subsequently formed “secondary chilled margins” represent cumulates that crystallized from liquids produced by temperature gradient-driven Soret fractionation. At high temperature gradients the process tends to produce similar cotectic liquids crystallizing gabbronorite (or gabbro) from all parental magmas of a given magmatic system, resulting in compositionally similar “secondary chilled margins” that are more evolved than bulk compositions. At low temperature gradients the process produces liquids that are only slightly more fractionated than the parental magma and form “secondary chilled margins” that are more primitive than bulk compositions. This interpretation suggests that, apart from the rare cases of chilled margins that survived remelting, they should not be used as monitors for parental magma compositions of intrusive bodies, even if all conventional complicating factors were not operative. 相似文献
13.
Carlos Garza-Gonzlez Antoni Camprubí Eduardo Gonzlez-Partida Germn Arriaga-García Fernando Rosique-Naranjo 《Journal of Geochemical Exploration》2006,89(1-3):124
The Tiámaro deposit in Michoacán state has been dated as Lower Cretaceous (Valanginian), though most of the porphyry deposits in central Mexico were dated or have an attributed Eocene–Oligocene age. The host rocks belong to a volcanoplutonic complex overlain by red conglomerates. These rocks were intruded by pre-Valanginian plutonic and hypabissal rocks. Propylitic, phyllic, and argillic alteration assemblages developed, and their superimposition draws the evolution of the deposit. Stage I is represented by propylitic assemblages, stage II contains the main ore forming stockworks and both phyllic and argillic assemblages, and stage III contains late carbonatization assemblages. The obtained temperatures and salinities from inclusion fluids are low for a porphyry-type deposit, but we interpret that the known part of the deposit represents the shallow portion of a bigger deposit. The evolution of mineralizing fluids draws a dilution trend of brines from “porphyry-like” to “epithermal-like” stages. The richest ore zone is roughly located between the 300 and 350 °C isotherms, though unnoticed resources may occur at depth. 相似文献
14.
M.R. St-Onge 《Tectonophysics》1981,76(3-4)
Three progressive metamorphic suites are developed in pelitic rocks of the northern Wopmay Orogen. Two suites are related to the Hepburn Batholith and one to the Wentzel Batholith. All three suites are cut by post-metamorphic wrench faults, some of which have significant vertical displacement. The structural relief so provided reveals that medium-and high-grade isograds associated with the Hepburn Batholith dip inward towards the batholith and are thus “hot-side-up”. Isograds associated with the Wentzel Batholith dip away from the batholith and are thus “hot-side-down”. It is concluded that Hepburn Batholith has the form of the flattened funnel fed from depth, and that Wentzel Batholith is the arched roof of an intrusive complex of unknown shape at depth. 相似文献
15.
J. Bebien R. Blanchet J.-P. Cadet J. Charvet J. Chorowicz H. Lapierre J.-P. Rampnoux 《Tectonophysics》1978,47(1-2)
The Aniso-Ladinian “porphyrite—radiolarite” formation which outcrops in all the paleogeographical zones of the Dinarides includes, on the one hand, a series of carbonate-pelite sediments with sandstones and radiolarian cherts, and on the other, pyroclastic formations and lava flows. It is contemporaneous with the formation of troughs and ridges. The magmatic rocks consist of (1) basalts and spilites (2) andesites and andesitic tuffs (3) dolerites, diabases and gabbros (4) quartz-rich rhyolites and tuffs.Preliminary geochemical studies reveal that the andsites and basalts are rich in alumina, poor in titanium and show a calc-alkaline trend.The Yugoslavian middle Triassic magmatism is very different from that related to continental rifting, but is not unlike present-day calc-alkaline series in volvanic arcs. This leads one to suppose that the individualisation of throughs and ridges in the Dinarides during Triassic times is related to convergent plate movements, as is at present the opening of inter-arc basins. This raises the controversial question of the existence of a Paleotethys during the Hercynian. 相似文献
16.
A newly identified skarn occurrence is described from the Neoproterozoic rocks of the SW Arabian shield. It is exposed to the SE, E and NE of the Al-Madhiq town. The skarn attributes correspond to those typical of the calcic skarns that host W-deposits. It is characterized as an exoskarn of the proximal type, related to a granitoid contact close to an impure quartzite bed within the regional metamorphic rocks of mixed sedimentary and volcanic derivation. The skarn is localized along a shear zone parallel to the regional faults and other major shear zones. Samples from the studied area contain characteristic skarn minerals that include both the prograde (brownish red grossular, ferrosalite, aluminian titanite-grothite, albite-oligoclase, scapolite), and retrograde (epidote, quartz, hornblende, calcite) assemblages. The pyroxenes are ferrosalites, Mn-bearing, and more like those from “oxidized” skarns; although garnets indicate it to be a “reduced” type skarn. Epidote mimicks that from typical skarns, as it bears a pistacite content of 15.9–20.7%. Grossular composition reflects a largely reduced genetic environment; as it is in solid solution with 6.5–21.6% andradite, 0–0.15% uvarovite, 0–0.47% pyrope, 4.33–18.75% almandine, and 0.4–8.58% spessartine molecules. Titanite composition varies from aluminian titanite to grothite, that may be analogous to the newly described Al-rich titanite from the low-pressure calc-silicate rocks. 相似文献
17.
The main objective of this paper is to identify the geochemical, hydrological, igneous and tectonic processes that led to the variations in the physical (size, geometry) and chemical (mineralogy, metal ratios and zoning) characteristics of volcanogenic massive sulfide deposits with respect to space (from a scale of mining district size area to a global scale) and time (from a < 10 000 year time scale to a geologic time scale).All volcanogenic massive sulfide deposits (VMSDs) appear to have formed in extensional tectonic settings, such as at mid ocean spreading centers, backarc spreading centers, and intracontinental rifts (and failed rifts). All VMSDs appear to have formed in submarine depressions by seawater that became ore-forming fluids through interactions with the heated upper crustal rocks. Submarine depressions, especially those created by submarine caldera formation and/or by large-scale tectonic activities (e.g., rifting), become most favorable sites for the formation of large VMSDs because of hydrological, physical and chemical reasons.The fundamental processes leading to the formation of VMSDs include the following six processes:
- 1. (1) Intrusion of a heat source (typically a 103 km size pluton) into an oceanic crust or a submarine continental crust causes deep convective circulation of seawater around the pluton. The radius of a circulation cell is typically 5 km. The temperature of fluids that discharge on the seafloor increases with time from the ambient temperature to a typical maximum of 350°C, and then decreases gradually to the ambient temperatures in a time scale of 100 to 10 000 years. The majority of sulfide and sulfate mineralization occurs during the waxing stage of hydrothermal activity.
- 2. (2) Reactions between low temperature (T < 150°C) country rocks with downward percolating seawater cause to precipitate seawater SO2−4 as disseminated gypsum and anhydrite in the country rocks.
- 3. (3) Reactions of the “modified” seawater with higher-temperature rocks at depths during the waxing stage cause the transformation of the “seawater” to metal- and H2S-rich ore-forming fluids. The metals and sulfide sulfur are leached from the county rocks; the previously formed gypsum and anhydrite are reduced by Fe2+-bearing minerals and organic matter, providing additional H2S. The mass of high temperature rocks that provide the metals and reduced sulfur is typically 1011 tons ( 40 km3 in volume). The roles of magmatic fluids or gases are minor in most massive sulfide systems, except for SO2 to produce acid-type alteration in some systems.
- 4. (4) Reactions between the ore-forming fluids and cooler rocks in the discharge zone cause alteration of rocks and precipitation of some ore minerals in the stockwork ores.
- 5. (5) Mixing of the ore-forming fluids with local seawater within unconsolidated sediments and/or on the seafloor causes precipitation of “primitive ores” with the black ore mineralogy (sphalerite + galena + pyrite + barite + anhydrite).
- 6. (6) Reactions between the “primitive ores” with later and hotter hydrothermal fluids cause transformation of “primitive ores” to “matured ores” that are enriched in chalcopyrite and pyrite.
- 1. (A) The chemical and physical characteristics of seawater (composition, temperature, density), which depend largely on the geographical settings (e.g., equatorial evaporating basins),
- 2. (B) The chemical and physical characteristics of the plumbing system (lithology, fractures),
- 3. (C) The thermal structure of the plumbing system, which is determined largely by the ambient geothermal gradient, and the size and temperature of the intrusive, and
- 4. (D) The physical characteristics of the seafloor (depth, basin topography).
18.
W.E. Krumbein 《Precambrian Research》1983,20(2-4)
Several definitions of stromatolites are discussed and Kalkowsky's most important statements about stromatolites are translated from German to English. A new definition for stromatolites is proposed, namely “Stromatolites are laminated rocks, the origin of which can clearly be related to the activity of microbial communities, which by their morphology, physiology and arrangement in space and time interact with the physical and chemical environment to produce a laminated pattern which is retained in the final rock structure”. Unconsolidated laminated systems, clearly related to the activity of microbial communities and often called “recent stromatolites” or “living stromatolites”, are defined as “potential stromatolites”.The main microbial activities which are important in the formation of potential stromatolites and stromatolites are described and examples of stromatolites of various types, including iron stromatolites, are also described. 相似文献
19.
The island of Sark (Channel Islands, UK) exposes syntectonic plutons and country rock gneisses within a Precambrian (Cadomian) continental arc. This Sark arc complex records sequential pulses of magmatism over a period of 7 Ma (ca. 616–609 Ma). The earliest intrusion (ca. 616 Ma) was a composite sill that shows an ultramafic base overlain by a magma-mingled net vein complex subsequently deformed at near-solidus temperatures into the amphibolitic and tonalitic Tintageu banded gneisses. The deformation was synchronous with D2 deformation of the paragneissic envelope, with both intrusion and country rock showing flat, top-to-the-south LS fabrics. Later plutonism injected three homogeneous quartz diorite–granodiorite sheets: the Creux–Moulin pluton (150–250 m; ca. 614 Ma), the Little Sark pluton (>700 m; 611 Ma), and the Northern pluton (>500 m; 609 Ma). Similar but thinner sheets in the south (Derrible–Hogsback–Dixcart) and west (Port es Saies–Brecqhou) are interpreted as offshoots from the Creux–Moulin pluton and Little Sark pluton, respectively. All these plutons show the same LS fabric seen in the older gneisses, with rare magmatic fabrics and common solid state fabrics recording syntectonic crystallisation and cooling. The cooling rate increased rapidly with decreasing crystallisation age: >9 Ma for the oldest intrusion to cool to lower amphibolite conditions, 7–8 Ma for the Creux Moulin pluton, 5–6 Ma for the Little Sark pluton, and <3 Ma for the Northern pluton. This cooling pattern is interpreted as recording extensional exhumation during D2. The initiation of the D2 event is suggested to have been a response to the intrusion of the Tintageu magma which promoted a rapid increase in strain rate (>10−14 s−1) that focussed extensional deformation into the Sark area. The increased rates of extension allowed ingress of the subsequent quartz diorite–granodiorite sheets, although strain rate slowly declined as the whole complex cooled during exhumation. The regional architecture of syntectonic Cadomian arc complexes includes flat-lying “Sark-type” and steep “Guernsey-type” domains produced synchronously in shear zone networks induced by oblique subduction: a pattern seen in other continental arcs such as that running from Alaska to California. 相似文献
20.
Analysis and simulation of magma mixing processes in 3D 总被引：2，自引：0，他引：2
Magma mixing structures from the lava flow of Lesbos (Greece) are analyzed in three dimensions using a technique that, starting from the serial sections of rock cubes, allows the reconstruction of the spatial distribution of magmas inside rocks. Two main kinds of coexisting structures are observed: (i) “active regions” (AR) in which magmas mix intimately generating wide contact surfaces and (ii) “coherent regions” (CR) of more mafic magma that have a globular shape and do not show large deformations. The intensity of mingling is quantified by calculating both the interfacial area (IA) between interacting magmas and the fractal dimension of the reconstructed structures. Results show that the fractal dimension is linearly correlated with the logarithm of interfacial area allowing discrimination among different intensities of mingling.
The process of mingling of magmas is simulated using a three-dimensional chaotic dynamical system consisting of stretching and folding processes. The intensity of mingling is measured by calculating the interfacial area between interacting magmas and the fractal dimension, as for natural magma mixing structures. Results suggest that, as in the natural case, the fractal dimension is linearly correlated with the logarithm of the interfacial area allowing to conclude that magma mixing can be regarded as a chaotic process.
Since chemical exchange and physical dispersion of one magma inside another by stretching and folding are closely related, we performed coupled numerical simulations of chaotic advection and chemical diffusion in three dimensions. Our analysis reveals the occurrence in the same system of “active mixing regions” and “coherent regions” analogous to those observed in nature. We will show that the dynamic processes are able to generate magmas with wide spatial heterogeneity related to the occurrence of magmatic enclaves inside host rocks in both plutonic and volcanic environments. 相似文献