首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
ABSTRACT

Water infiltration into soils is an important component of hydrological processes. Direct measurement of infiltration is time consuming, expensive and often involves large spatial and temporal variability. The objective of this study was to develop and verify parametric pedotransfer functions (PTFs) to predict infiltration parameters. Consequently, 119 double-ring infiltration data were collected. The parameters of Philip, Kostiakov, Kostiakov-Lewis and Horton models were obtained, using the sum of squares error optimization method. Some parametric PTFs were then derived to predict the parameters of the infiltration models, using stepwise regression analysis. The results indicated a reasonable estimation of infiltration parameters by the derived PTFs. These results were more accurate when the land use of the studied area was considered. Overall results of this study suggest infiltration-based PTFs could be established as a reasonable indirect method for estimating infiltration parameters.
Editor M.C. Acreman; Associate editor N. Verhoest  相似文献   

2.
ABSTRACT

In many arid and semi-arid countries, wastewater irrigation is becoming a common practice in agriculture. In this study, the effect of long-term (40 years) wastewater irrigation on selected physical and hydraulic properties of soil in different parts of a landscape was investigated. The performance of some infiltration models, including Philip (Ph), Kostiakov (Kos), Kostiakov-Lewis (Kos-L), Horton (Ho), Huggins and Monke (Hug-M), and linear and nonlinear Smith-Parlange (S-P(L) and S-P(NL)), was compared. This study was performed in the Urmia region, Iran, where flooding wastewater irrigation has been practised for at least 40 years. Five paired sites, each of which contained a measurement location at the wastewater-irrigated (WWI) and adjacent control area were studied. Accuracy of the infiltration models was evaluated using several statistical criteria, including root mean square error (RMSE) and Akaike information criterion (AIC). The models were classified into groups using cluster analysis based on level of similarity in their performance. The cumulative water infiltration into soils after 1 h (I1h) was calculated using the selected most accurate models and introduced so as to use only one term to compare the infiltration behaviour of soils. Based on RMSE and AIC, the performance of the Ph, Ho, Kos and Kos-L models was considerably better than that of Hug-M, S-P(L) and S-P(NL). The ranking of the models in terms of their AIC values was: Kos-L > Ho > Kos > Ph > S-P(L) > Hug-M > S-P(NL). The models were classified into two distinct groups. The similarity among Ph, Ho, Kos and Kos-L models was more than 80% and for Hug-M, S-P(L), and S-P(NL) models, it was more than 79%. However, the similarity between these two groups of models was less than 58%.
Editor M.C. Acreman; Associate editor not assigned  相似文献   

3.
《水文科学杂志》2013,58(2):349-362
Abstract

A methodology of time-step estimation for numerically solving the Richards equation is discussed. Its importance in simulating water movement in unsaturated—saturated soils is shown for infiltration into a soil profile by applying various time-step estimations and boundary conditions for different soils. In order to test the results of the computations, infiltration theory was applied. According to infiltration theory, the pressure head in the initially unsaturated part will not take positive values as long as the moisture front has not reached the phreatic level, or, in the case of a profile with a free-draining lower boundary, it is not saturated at the base. In other cases, the appearance of positive values of the pressure head produces incorrect values for the inflow rate q.  相似文献   

4.
ABSTRACT

Infiltration plays a fundamental role in streamflow, groundwater recharge, subsurface flow, and surface and subsurface water quality and quantity. In this study, adaptive neuro-fuzzy inference system (ANFIS), support vector machine (SVM) and random forest (RF) models were used to determine cumulative infiltration and infiltration rate in arid areas in Iran. The input data were sand, clay, silt, density of soil and soil moisture, while the output data were cumulative infiltration and infiltration rate, the latter measured using a double-ring infiltrometer at 16 locations. The results show that SVM with radial basis kernel function better estimated cumulative infiltration (RMSE = 0.2791 cm) compared to the other models. Also, SVM with M4 radial basis kernel function better estimated the infiltration rate (RMSE = 0.0633 cm/h) than the ANFIS and RF models. Thus, SVM was found to be the most suitable model for modelling infiltration in the study area.  相似文献   

5.
Stormwater best management practice (BMP) design must incorporate the expected long‐term performance from both a water quantity and water quality perspective to sustainably mitigate hydrologic and water quality impacts of development. Infiltration trench structures are one of many infiltration BMPs that reduce runoff volume and capture pollutants. Research on the longevity of these structures is sparse, leading to concerns about their long‐term value and impeding implementation. In the present study, an infiltration trench was monitored from its inception to determine its hydrologic performance over time and total suspended solids (TSS) capture efficiency. The infiltration trench was intentionally undersized to accelerate longevity‐related processes. The infiltration trench provided a 36% TSS removal rate and displayed a distinct decrease in its ability to infiltrate stormwater runoff over the first three years of operation. Results indicate that infiltration through the bottom of the BMP became negligible, while infiltration through the sides of the BMP remained active over the 3‐year study period. The results lead to recommendations for BMP design. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

6.
Spreading‐basin methods have resulted in more than 130 million cubic metres of recharge to the unconfined Navajo Sandstone of southern Utah in the past decade, but infiltration rates have slowed in recent years because of reduced hydraulic gradients and (or) clogging. Trench infiltration is a promising alternative technique for increasing recharge and minimizing evaporation. This paper uses a variably saturated flow model to further investigate the relative importance of the following variables on rates of trench infiltration to unconfined aquifers: saturated hydraulic conductivity, trench spacing and dimensions, initial water‐table depth, alternate wet/dry periods, and number of parallel trenches. Modelling results showed (1) increased infiltration with higher hydraulic conductivity, deeper initial water tables, and larger spacing between parallel trenches, (2) deeper or wider trenches do not substantially increase infiltration, (3) alternating wet/dry periods result in less overall infiltration than keeping the trenches continuously full, and (4) larger numbers of parallel trenches within a fixed area increases infiltration but with a diminishing effect as trench spacing becomes tighter. An empirical equation for estimating expected trench infiltration rates as a function of hydraulic conductivity and initial water‐table depth was derived and can be used for evaluating feasibility of trench infiltration in other hydrogeologic settings. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

7.
Managed aquifer recharge to permeable bedrock is increasingly being utilized to enhance resources and maintain sustainable groundwater development practices. One such target is the Navajo Sandstone, an extensive regional aquifer located throughout the Colorado Plateau of the western United States. Spreading‐basin and bank‐filtration projects along the sandstone outcrop's western edge in southwestern Utah have recently been implemented to meet growth‐related water demands. This paper reports on a new cost‐effective surface‐infiltration technique utilizing trenches for enhancing managed aquifer recharge to permeable bedrock. A 48‐day infiltration trench experiment on outcropping Navajo Sandstone was conducted to evaluate this alternative surface‐spreading artificial recharge method. Final infiltration rates through the bottom of the trench were about 0·5 m/day. These infiltration rates were an order of magnitude higher than rates from a previous surface‐spreading experiment at the same site. The higher rates were likely caused by a combination of factors including the removal of lower permeability soil and surficial caliche deposits, access to open vertical sandstone fractures, a reduction in physical clogging associated with silt and biofilm layers, minimizing viscosity effects by maintaining isothermal conditions, minimizing chemical clogging caused by carbonate mineral precipitation associated with algal photosynthesis, and diminished gas clogging associated with trapped air and biogenic gases. This pilot study illustrates the viability of trench infiltration for enhancing surface spreading of managed aquifer recharge to permeable bedrock. Published in 2010 by John Wiley & Sons, Ltd.  相似文献   

8.
Abstract

A model based on analytical development and numerical solution is presented for estimating the cumulative distribution function (cdf) of the runoff volume and peak discharge rate of urban floods using the joint probability density function (pdf) of rainfall volume and duration together with information about the catchment's physical characteristics. The joint pdf of rainfall event volume and duration is derived using the theory of copulas. Four families of Archimedean copulas are tested in order to select the most appropriate to reproduce the dependence structure of those variables. Frequency distributions of runoff event volume and peak discharge rate are obtained following the derived probability distribution theory, using the functional relationship given by the rainfall–runoff process. The model is tested in two urban catchments located in the cities of Chillán and Santiago, Chile. The results are compared with the outcomes of continuous simulation in the Storm Water Management Model (SWMM) and with those from another analytical model that assumes storm event duration and volume to be statistically independent exponentially distributed variables.

Citation Zegpi, M. & Fernández, B. (2010) Hydrological model for urban catchments – analytical development using copulas and numerical solution. Hydrol. Sci. J. 55(7), 1123–1136.  相似文献   

9.
Stormwater infiltration systems are a popular method for urban stormwater control. They are often designed using an assumption of one‐dimensional saturated outflow, although this is not very accurate for many typical designs where two‐dimensional (2D) flows into unsaturated soils occur. Available 2D variably saturated flow models are not commonly used for design because of their complexity and difficulties with the required boundary conditions. A purpose‐built stormwater infiltration system model was thus developed for the simulation of 2D flow from a porous storage. The model combines a soil moisture–based model for unsaturated soils with a ponded storage model and uses a wetting front‐tracking approach for saturated flows. The model represents the main physical processes while minimizing input data requirements. The model was calibrated and validated using data from laboratory 2D stormwater infiltration trench experiments. Calibrations were undertaken using five different combinations of calibration data to examine calibration data requirements. It was found that storage water levels could be satisfactorily predicted using parameters calibrated with either data from laboratory soils tests or observed water level data, whereas the prediction of soil moistures was improved through the addition of observed soil moisture data to the calibration data set. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

10.
Abstract

Abstract The role of accuracy in the representation of infiltration on the effectiveness of real-time flood forecasting models was investigated. A simple semi-distributed model of conceptual type with adaptive estimate of hydraulic characteristics included in the infiltration component was selected. Infiltration was described by a very accurate approach recently formulated for complex rainfall patterns, or alternatively through a simpler formulation known as an extension of the classical time compression approximation. The results indicated that, for situations involving a significant rainfall variability in space, the inaccuracy in the representation of infiltration cannot be corrected by the adaptive component of the rainfall–runoff model. A preliminary analysis of the role of an approximation of saturated hydraulic conductivity to be used in each homogeneous area of the semi-distributed model used both in non-adaptive version and in real-time is also presented.  相似文献   

11.
《水文科学杂志》2012,57(2):212-226
ABSTRACT

The estimation of infiltration is a main issue in runoff simulation. The geometry of hillslopes (plan shape and profile curvature) may affect the responses, as well as infiltration over the hillslopes. In this study, the equations of TOPMODEL (a topography-based model) were applied to complex hillslopes to develop the complex TOPMODEL. This model was coupled with the SCS-CN (Soil Conservation Service Curve Number) model to examine the effects of geometry on infiltration and derive a saturation excess-based curve number (CN). The effects of plan shape and profile curvature upon the spatial distribution of CN and infiltration were studied. The results show that convergent hillslopes have 15.4% less infiltration and divergent hillslopes have 7.8% more infiltration than parallel ones. The infiltration over concave hillslopes is 13.5% lower and infiltration over convex hillslopes 5.8% higher than for straight ones. The degree of convergence/divergence has a greater effect on the CN compared to that of profile curvature.  相似文献   

12.
The repellency index (RI) defined as the adjusted ratio between soil‐ethanol, Se, and soil‐water, Sw, sorptivities estimated from minidisk infiltrometer experiments has been used instead of the widely used water drop penetration time and molarity of ethanol drop tests to assess soil water repellency. However, sorptivity calculated by the usual early‐time infiltration equation may be overestimated as the effects of gravity and lateral capillary are neglected. With the aim to establish the best applicative procedure to assess RI, different approaches to estimate Se and Sw were compared that make use of both the early‐time infiltration equation (namely, the 1 min, S1, and the short‐time linearization approaches), and the two‐term axisymmetric infiltration equation, valid for early to intermediate times (namely, the cumulative linearization and differentiated linearization approaches). The dataset included 85 minidisk infiltrometer tests conducted in three sites in Italy and Spain under different vegetation habitats (forest of Pinus pinaster and Pinus halepensis, burned pine forest, and annual grasses), soil horizons (organic and mineral), postfire treatments, and initial soil water contents. The S1 approach was inapplicable in 42% of experiments as water infiltration did not start in the first minute. The short‐time linearization approach yielded a systematic overestimation of Se and Sw that resulted in an overestimation of RI by a factor of 1.57 and 1.23 as compared with the cumulative linearization and differentiated linearization approaches. A new repellency index, RIs, was proposed as the ratio between the slopes of the linearized data for the wettable and hydrophobic stages obtained by a single water infiltration test. For the experimental conditions considered, RIs was significantly correlated with RI and WDPT. Compared with RI, RIs includes information on both soil sorptivity and hydraulic conductivity and, therefore, it can be considered more physically linked to the hydrological processes affected by soil water repellency.  相似文献   

13.
Qihua Ran  Feng Wang  Jihui Gao 《水文研究》2020,34(23):4526-4540
Rainfall characteristics are key factors influencing infiltration and runoff generation in catchment hydrology, particularly for arid and semiarid catchments. Although the effect of storm movement on rainfall-runoff processes has been evaluated and emphasized since the 1960s, the effect on the infiltration process has barely been considered. In this study, a physically based distributed hydrological model (InHM) was applied to a typical semi-arid catchment (Shejiagou, 4.26 km2) located in the Loess Plateau, China, to investigate the effect of storm movement on infiltration, runoff and soil erosion at the catchment scale. Simulations of 84 scenarios of storm movement were conducted, including storms moving across the catchment in both the upstream and downstream directions along the main channel, while in each direction considering four storm moving speeds, three rainfall depths and two storm ranges. The simulation results showed that, on both the hillslopes facing downstream (facing south) and in the main channel, the duration of the overland flow process under the upstream-moving storms was longer than that under the downstream-moving storms. Thus, the duration and volume of infiltration under upstream-moving storms were larger in these areas. For the Shejiagou catchment, as there are more hillslopes facing downstream, more infiltration occurred under the upstream-moving storms than the downstream-moving storms. Therefore, downstream-moving storms generated up to 69% larger total runoff and up to 351% more soil loss in the catchment than upstream-moving storms. The difference in infiltration between the storms moving upstream and downstream decreased as the storm moving speed increased. The relative difference in total runoff and sediment yield between the storms moving upstream and downstream decreased with increasing rainfall depth and storm speed. The results of this study revealed that the infiltration differences under moving storms largely influenced the total runoff and sediment yield at the catchment scale, which is of importance in runoff prediction and flood management. The infiltration differences may be a potential factor leading to different groundwater, vegetation cover and ecology conditions for the different sides of the hillslopes.  相似文献   

14.
Three algebraic infiltration equations (Kostiakov's, Horton's and Philip's) were examined to determine which one would best fit infiltrometer data collected from a variety of mostly semi-arid rangeland plant communities from both Australia and the United States. Approximately 1,100 infiltrometer plots were included in the analysis. Results indicated that, in every instance, Horton's equation best fit the infiltrometer data. Variability of “point” measures of short-term infiltration rates were never satisfactorily accounted for by using either Kostiakov's or Philip's equation. Though Horton's equation provided a best fit to the overall infiltration data, R2 values indicated a potential usefulness of this equation only under the certain conditions that were sampled in several rangeland plant communities in the Northern Territory, Australia. The equation could not be considered consistently useful under conditions sampled on rangelands in the United States.  相似文献   

15.
Water infiltration rate and hydraulic conductivity in vegetated soil are two vital hydrological parameters for agriculturists to determine availability of soil moisture for assessing crop growths and yields, and also for engineers to carry out stability calculations of vegetated slopes. However, any effects of roots on these two parameters are not well‐understood. This study aims to quantify the effects of a grass species, Cynodon dactylon, and a tree species, Schefflera heptaphylla, on infiltration rate and hydraulic conductivity in relation to their root characteristics and suction responses. The two selected species are commonly used for ecological restoration and rehabilitation in many parts of the world and South China, respectively. A series of in‐situ double‐ring infiltration tests was conducted during a wet summer, while the responses of soil suction were monitored by tensiometers. When compared to bare soil, the vegetated soil has lower infiltration rate and hydraulic conductivity. This results in at least 50% higher suction retained in the vegetated soil. It is revealed that the effects of root‐water uptake by the selected species on suction were insignificant because of the small evapotranspiration (<0.2 mm) when the tests were conducted under the wet climate. There appears to have no significant difference (less than 10%) of infiltration rates, hydraulic conductivity and suction retained between the grass‐covered and the tree‐covered soil. However, the grass and tree species having deeper root depth and greater Root Area Index (RAI) retained higher suction. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

16.
Abstract

The hydrodynamic derivation of a variable parameter Muskingum method and its solution procedure for estimating a routed hydrograph were presented in Part I of this series (Perumal, 1994a). In this paper, the limitations of the method, the criterion for its applicability and its accuracy are discussed based on the assumptions used. The method is verified by routing a given hypothetical inflow hydrograph through uniform rectangular cross-section channels and comparing the results with the corresponding numerical solutions of the St. Venant equations. The stage hydrographs as computed by the method are also compared with the corresponding St. Venant solutions. It is demonstrated that the method closely reproduces the St. Venant solutions for the discharge and stage hydrographs subject to the compliance of the assumptions of the method by the routing process.  相似文献   

17.
Jianting Zhu 《水文科学杂志》2020,65(11):1872-1878
ABSTRACT

In this study, an approach is developed to investigate the impact of fractal characteristics of unsaturated soil between the water table and land surface on the steady-state evaporation and infiltration across a heterogeneous landscape. The soil domain is conceptualized as a collection of stream tubes of soils and the particle diameters in various stream tubes follow a fractal distribution. The saturated hydraulic conductivity of each stream tube is related to the representative particle diameter in the tube. The effective specific discharge is then integrated from the specific discharge for each stream tube and the fractal distribution. The effective evaporation and infiltration in unsaturated soils increase with the fractal dimension. The ratio of minimum over maximum diameters does not significantly affect the specific discharge in the fractal soil. The specific discharge in unsaturated fractal soils calculated by using the simple average particle diameter mostly over-predicts the actual effective specific discharge.  相似文献   

18.
ABSTRACT

Soil infiltration processes were evaluated under field conditions by double-ring infiltrometers with different underlying surfaces in permafrost regions of the Tibetan Plateau. The results show that initial infiltration rates, stable soil infiltration rates and cumulative soil infiltration are strongly dependent on the underlying surface types, with the highest initial and stable soil infiltration rates in the alpine desert steppe, and the lowest in alpine meadow. The effects of soil moisture and texture on infiltration processes were also assessed. Within the same underlying surfaces, the values of infiltration parameters increased with the amount of vegetation cover, while soil moisture and soil infiltration rates displayed opposing trends, with fitting slopes of ?0.03 and ?0.01 for the initial and stable soil infiltration rates, respectively. The accuracies of the five models in simulating soil infiltration rates and seven models in predicting cumulative infiltration rates were evaluated against data generated from field experiments at four sites. Based on a comparative analysis, the Horton model provided the most complete understanding of the underlying surface effects on soil infiltration processes. Altogether, these findings show that different underlying surfaces can alter soil infiltration processes. This study provides a useful reference for understanding the parameterization of land surface processes for simulating changes in hydrological processes under global warming conditions in the permafrost region on the Tibetan Plateau.  相似文献   

19.
《水文科学杂志》2013,58(4):665-671
Abstract

Analytical solutions of a routing problem for storm water flowing through a linear reservoir are presented for the assumption of trapezoidal-shaped inflow hydrograph. The maximum ponded (water) depth in the detention basin is chosen as a main design criterion. Calculations are carried out for a given rain recurrence interval but for various rain durations and sand filter surface areas to reach the maximum permitted ponded depth. A design example is also provided.  相似文献   

20.
Determination of saturated hydraulic conductivity, Ks, and the shape parameters α and n of the water retention curve, θ(h), is of paramount importance to characterize the water flow in the vadose zone. This work presents a modified upward infiltration method to estimate Ks, α and n from numerical inverse analysis of the measured cumulative upward infiltration (CUI) at multiple constant tension lower boundary conditions. Using the HYDRUS‐2D software, a theoretical analysis on a synthetic loam soil under different soil tensions (0, 0–10, 0–50 and 0–100 cm), with and without an overpressure step of 10 cm high from the top boundary condition at the end of the upward infiltration process, was performed to check the uniqueness and the accuracy of the solutions. Using a tension sorptivimeter device, the method was validated in a laboratory experiment on five different soils: a coarse and a fine sand, and a 1‐mm sieved loam, clay loam and silt‐gypseous soils. The estimated α and n parameters were compared to the corresponding values measured with the TDR‐pressure cell method. The theoretical analysis demonstrates that Ks and θ(h) can be simultaneously estimated from measured upward cumulative infiltration when high (>50 cm) soil tensions are initially applied at the lower boundary. Alternatively, satisfactory results can be also obtained when medium tensions (<50 cm) and the Ks calculated from the overpressure step at the end of the experiment are considered. A consistent relationship was found between the α (R2 = 0.86, p < 0.02) and n (R2 = 0.97, p < 0.001) values measured with the TDR‐pressure cell and the corresponding values estimated with the tension sorptivimeter. The error between the α (in logarithm scale) and n values estimated with the inverse analysis and the corresponding values measured with pressure chamber were 3.1 and 6.1%, respectively. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号