首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 718 毫秒
1.
Active faults in the Zagros and central Iran   总被引：1，自引：0，他引：1  
Active tectonic movements in the northwestern Zagros include right lateral slip at the rate of about 10 mm/a along the Main Recent Fault, which inherits the position of the Main Thrust, now inactive, and active thrusting and accompanying folding distributed between several zones southwest of the Main Recent Fault. In the southeastern Zagros (the Fars Province), there are several right lateral faults that extend N–S obliquely to the overall trend of the Zagros fault-and-fold belt. These may be either branches of the Main Recent Fault, or faults accommodating relative broadening of the outer Zagros in its southeastern segment. The Main Thrust in the southeastern Zagros also remains inactive.

The Ipak, North Tehran, and Mosha fault zones and several minor structures in the eastern Alborz form the E–W-trending active fault system with combined reverse and left lateral slip. On the Ipak and Mosha zones, lateral movements with the late Quaternary mean rate exceeding 1 mm/a dominate over vertical fault movements. Together with right lateral faults stretching northeast of Zagros, the faults of the Alborz may accommodate east-directed motion of the Iranian microplate.  相似文献   


2.
The Main Recent Fault of the Zagros Orogen is an active major dextral strike-slip fault along the Zagros collision zone, generated by oblique continent–continent collision of the Arabian plate with Iranian micro-continent. Two different fault styles are observed along the Piranshahr fault segment of the Main Recent Fault in NW Iran. The first style is a SW-dipping oblique reverse fault with dextral strike-slip displacement and the second style consists of cross-cutting NE-dipping, oblique normal fault dipping to the NE with the same dextral strike-slip displacement. A fault propagation anticline is generated SW of the oblique reverse fault. An active pull-apart basin has been produced to the NE of the Piranshahr oblique normal fault and is associated with other sub-parallel NE-dipping normal faults cutting the reverse oblique fault. Another cross-cutting set of NE–SW trending normal faults are also exist in the pull-apart area. We conclude that the NE verging major dextral oblique reverse fault initiated as a SW verging thrust system due to dextral transpression tectonic of the Zagros collision zone and later it has been overprinted by the NE-dipping oblique normal fault producing dextral strike-slip displacement reflecting progressive change of transpression into transtension in the collision zone. The active Piranshahr pull-apart basin has been generated due to a releasing damage zone along the NW segment of the Main Recent Fault in this area at an overlap of Piranshahr oblique normal fault segment of the Main Recent Fault and the Serow fault, the continuation of the Main Recent Fault to the N.  相似文献   

3.
The southern termination of the left-lateral ‘Moyenne Durance’ Fault (FMD) consists in several segments, some being connected to WSW-trending south-verging reverse faults. To the south, the Aix fault is reactivated in a post-Oligocene strike-slip movement showing that these two faults might belong to the same system. This system seems to transfer, in turn, slip to the east-trending, south-verging Trévaresse reverse fault, allowing southward propagation of the Alpine deformation front in western Provence. Fault kinematics analysis shows lateral stress field change between the two faults. Strike-slip stress state is characterized by an average N150°E trending σ1 near the FMD termination, whilst strike-slip and reverse faulting stress states show north-trending σ1 to the south. To cite this article: P. Guignard et al., C. R. Geoscience 337 (2005).  相似文献   

4.
Recent works suggest Proterozoic plate convergence along the southeastern margin of India which led to amalgamation of the high grade Eastern Ghats belt (EGB) and adjoining fold-and-thrust belts to the East Dhrawar craton. Two major thrusts namely the Vellikonda thrust at the western margin of the Nellore Schist belt (NSB) and the Maidukuru thrust at the western margin of the Nallamalai fold belt (NFB) accommodate significant upper crustal shortening, which is indicated by juxtaposition of geological terranes with distinct tectonostratigraphy, varying deformation intensity, structural styles and metamorphic grade. Kinematic analysis of structures and fabric of the fault zone rocks in these intracontinental thrust zones and the hanging wall and footwall rocks suggest spatially heterogeneous partitioning of strain into various combinations of E-W shortening, top-to-west shear on stratum parallel subhorizontal detachments or on easterly dipping thrusts, and a strike slip component. Although relatively less prominent than the other two components of the strain triangle, non-orthogonal slickenfibres associated with flexural slip folds and mylonitic foliation-stretching lineation orientation geometry within the arcuate NSB and NFB indicate left lateral strike slip subparallel to the overall N-S trend. On the whole an inclined transpression is inferred to have controlled the spatially heterogeneous development of thrust related fabric in the terrane between the Eastern Ghats belt south of the Godavari graben and the East Dharwar craton.  相似文献   

5.
The Philippine Fault results from the oblique convergence between the Philippine Sea Plate and the Sunda Block/Eurasian Plate. The fault exhibits left-lateral slip and transects the Philippine archipelago from the northwest corner of Luzon to the southeast end of Mindanao for about 1200 km. To better understand fault slip behavior along the Philippine Fault, eight GPS surveys were conducted from 1996 to 2008 in the Luzon region. We combine the 12-yr survey-mode GPS data in the Luzon region and continuous GPS data in Taiwan, along with additional 15 International GNSS Service sites in the Asia-Pacific region, and use the GAMIT/GLOBK software to calculate site coordinates. We then estimate the site velocity from position time series by linear regression. Our results show that the horizontal velocities with respect to the Sunda Block gradually decrease from north to south along the western Luzon at rates of 85–49 mm/yr in the west–northwest direction. This feature also implies a southward decrease of convergence rate along the Manila Trench. Significant internal deformation is observed near the Philippine Fault. Using a two dimensional elastic dislocation model and GPS velocities, we invert for fault geometries and back-slip rates of the Philippine Fault. The results indicate that the back-slip rates on the Philippine Fault increase from north to south, with the rates of 22, 37 and 40 mm/yr, respectively, on the northern, central, and southern segments. The inferred long-term fault slip rates of 24–40 mm/yr are very close to back-slip rates on locked fault segments, suggesting the Philippine Fault is fully locked. The stress tensor inversions from earthquake focal mechanisms indicate a transpressional regime in the Luzon area. Directions of σ1 axes and maximum horizontal compressive axes are between 90° and 110°, consistent with major tectonic features in the Philippines. The high angle between σ1 axes and the Philippine Fault in central Luzon suggests a weak fault zone possibly associated with fluid pressure.  相似文献   

6.
The Palomares Fault Zone (PFZ) is one of the main strike-slip brittle shear zones found in the Betics. It is segmented in several faults that have been active between the Upper Tortonian and present day. Data from drill cores in the Palomares area have permitted us to define the geometry and location of sedimentary depocentres related with the PFZ. These data show an eastward displacement between the Upper Tortonian to Messinian and the Pliocene–Quaternary sedimentary depocentres, towards the presently active Arteal fault, which bounds the western mountain front of Sierra Almagrera, showing that deformation along this fault zone has migrated towards the east, from the Palomares segment, with its main activity during the Upper Tortonian and Messinian, towards the Arteal fault, active during the Pliocene and Quaternary. To cite this article: G. Booth-Rea et al., C. R. Geoscience 335 (2003).  相似文献   

7.
The Têt Fault looks like an active fault. Its activity, attested for Pliocene, remains discussed for Pleistocene. We propose a new scenario of evolution for the Têt Fault, highlighting the importance of Pleistocene exhumation processes. It is based on a relationship between morphology and basin filling. During Pleistocene, the fault activity is weak and vertical displacements seem to have no considerable impact on the drainage features. This study concludes that Pliocene offset may also be reduced: the fault activity generating relief is anterior to Pliocene. To cite this article: J.-M. Carozza, S. Baize, C. R. Geoscience 336 (2004).  相似文献   

8.
Fault surfaces have a finite area enclosed by branch- and tip-lines. A tip-line separates the slipped from the unslipped region. A branch-line forms where one fault splays off another and occurs at the trailing or leading ends of thrust sheets and along frontal, oblique and lateral ramps. Hence potentially complicated patterns of branch- and tip-lines outline or surround the fault surface. The branch-lines determine which parts of the fault geometry, off a line of section, can be projected on to the section; help to define the fault movement direction; and identify horses or fragments left behind by the faulting. The technique of analysing branch- and tip-lines is demonstrated on the thrusts of the Trondheim area to derive a more rigorous section which is also constrained by gravimetric, aeromagnetic and metamorphic data. Lateral branch-lines, parallel to the thrust slip-direction, suggest slip vectors between 155 and 165° (SE) for three of the thrusts. Horses, left behind by the thrusts, suggest minimum displacements of 50 and 100 km for two of these thrusts.  相似文献   

9.
The Siwaliks in the foothills of the Himalayas, containing molasse sediments derived from the rising mountain front, represent a foreland fold-thrust belt which was deformed during the continued northward convergence of the Indian plate following the continent-continent collision. In this contribution we present balanced and restored cross sections along a line from Adampur through Jawalamukhi to Palampur in the foothills of the Punjab and Himachal Himalayas using published surface/subsurface data. The cross section incorporates all the rock units of the Sub-Himalaya Zone as well as that of the northern Lesser Himalaya Zone. The structural geometry of the fold-thrust belt in this section is largely controlled by three buried thrusts within the Sundernagar Formation of the Lesser Himalaya Zone. Two of these buried thrusts splay from the basal detachment and delineate a buried horse. Three thrusts towards foreland, including the Main Frontal Thrust (inferred to be a blind thrust in this sector), splay from these buried thrusts. In the hinterland, an anticlinal fault-bend fold was breached by a sequence of break-back thrusts, one of which is the Main Boundary Thrust. A foreland propagating thrust system is inadequate to explain the evolution of the fold-thrust-belt in this section. We show that a “synchronous thrusting” model in whichin-sequence initiation of thrusts at depth combined with continued motion on all the thrusts leading toout-of-sequence imbrication at the upper structural levels better explains the evolution of the fold-thrust belt in the Jawalamukhi section. The estimated shortening between the two chosen pin lines is about 36% (about 72 km).  相似文献   

10.
The Monastir and Grombalia fault systems consist of three strands that the northern segment corresponds to Hammamet and Grombalia faults. The southern strand represents Monastir Fault also referred to as the Skanes-Khnis Fault. These NW-trends are observed continuously in the major outcropping features of north-eastern Tunisia including both the Cap Bon peninsula and the Sahel domain. Along the Hammamet Fault, the north-eastern strand of Grombalia fault system, left lateral drainage offset of amount 220 m is found in Fawara valley. To the South, the left lateral movement is occurred along the Monastir Fault based on 180 m of Tyrrhenian terrace displacement. Field observations supported by satellite images suggest that the Monastir and Grombalia fault systems appear to slip mostly laterally with components of normal dip slip. Assuming the development of the stream networks during the Riss-Würm interglacial (115000–125000 years) and the age of the Tyrrhenian terrace (121 ± 10 ka), the strike slip rates of the Hammamet and Monastir faults are calculated in the range of 1.5–1.8 mm/yr. There vertical slip rates are estimated to be 0.06 and 0.26 mm/yr, respectively. These data are consistent with the displacement rate in the Pelagian shelf (1–2 mm/yr) but they are below the convergence rate of African-Eurasian plates (8 mm/yr). Our seismotectonics study reveals that a maximum earthquake of Mw = 6.5 could occur every 470 years in the Hammamet fault zone and Mw = 6–every 263 years in the Monastir fault zone.  相似文献   

11.
This paper investigates the impact of active tectonics on the geomorphic processes and landscape evolution along the Kazerun Fault Zone (KFZ) in the Zagros Mountains of Iran using spatial analysis of geomorphic indices. We document how topography and morphology are influenced by active tectonic deformation. The Zagros fold–thrust belt is an area of active crustal shortening where northwest–southeast oriented fault‐related folds become younger from north to south and from southeast to northwest. This temporal and spatial evolution of the belt was tested using geomorphic indices of active tectonics that include mountain front sinuosity index (Smf), the valley width/height ratio (Vf), drainage basin asymmetry factor, hypsometric integral, drainage basin shape ratio and mean axial slope of the channel. Change in the geomorphic indices is the result of active fold growth and change in the uplift rate. Decreasing Smf and Vf values from north (Smf = 2.01; Vf = 0.5) to south (Smf = 1.12; Vf = 0.2) and from southeast (Smf = 1.84; Vf = 0.8) to northwest (Smf = 1.54; Vf = 0.1) points to a migration of the active crustal shortening towards W–SW. The combined geomorphic (field evidences) and morphometric data (quantitative analysis of geomorphic indices) provide evidence of relative variation in the tectonic activity along the Kazerun Fault Zone and related landforms. The utilization of geomorphic parameters with comparison to the field observations exhibits change in relative tectonic activities mostly corresponding to the change in mechanism of the prominent fault zones in the study area. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

12.
A high-resolution multichannel seismic reflection river profiling campaign was completed in July 2002 in the southern Upper Rhine graben (URG), along the River Rhine. Preliminary results show apparent Quaternary vertical slip rates, on intra-graben faults that are relatively slow, of the order of a few thousandths to a few hundredths of mm/yr. Moreover, kinematical data from the Ludwigshafen area show decreasing vertical slip rates since the Middle Pleistocene and/or a migration of tectonic activity. While still preliminary, these data show inhomogeneous and relatively slow tectonic activity in the URG that could probably not alone have shaped the Quaternary graben morphology. To cite this article: G. Bertrand et al., C. R. Geoscience 338 (2006).  相似文献   

13.
The Arro system is an oblique fold system involving the Eocene sediments of the Graus-Tremp basin. It consists of westward-verging folds, trending NNW–SSE, some of them related with thrusts, in piggyback sequence. Seismic profiles allow to infer the geometry of structures at depth: folds and thrusts are ‘decolled’ over an unconformity between turbiditic and platform sediments. Re-activation of bedding surfaces by folding in the underlying units resulted in folding and thrusting in the upper series. To cite this article: A.M. Casas et al., C. R. Geoscience 334 (2002) 765–772.  相似文献   

14.
Mapping the nucleation and 3D fault tip growth of the active Osaka-wan blind thrust provides an opportunity to asses how reactivated thrusts build slip from preexisting faults and the threat they pose as sources of large earthquakes. Analysis of folded growth strata, based on 2D trishear inverse modeling allows a range of best-fit models of the evolution of slip and propagation of the fault to be defined. The depth of the fault tip at 1200 ka varies between ∼1.5–4.5 km, suggesting the fault grew upward from high in the crust, and that it is reactivated. From its onset at ∼1500 ka, the fault grew rapidly along strike in ∼300 ky, and upwards with a P/S ratio of 2.5–3.0, but variable fault slip in space and time. Shallower depths of the fault tip at initiation and thinner basin fill correlates with slower propagation with time, contradicting models that argue for sediments as inhibitors of fault growth. Results also suggest the displacement profile of the currently active thrust is offset from its predecessor, assuming shallower depths to the original fault correlate with greater displacement in its prior history. These results suggest reactivated faults may accrue slip differently than newly developed ones, based on the history of upward fault propagation.  相似文献   

15.
Transpressional deformation has played an important role in the late Neoproterozoic evolution of the ArabianNubian Shield including the Central Eastern Desert of Egypt. The Ghadir Shear Belt is a 35 km-long, NW-oriented brittleductile shear zone that underwent overall sinistral transpression during the Late Neoproterozoic. Within this shear belt, strain is highly partitioned into shortening, oblique, extensional and strike-slip structures at multiple scales. Moreover, strain partitioning is heterogeneous along-strike giving rise to three distinct structural domains. In the East Ghadir and Ambaut shear belts, the strain is pure-shear dominated whereas the narrow sectors parallel to the shear walls in the West Ghadir Shear Zone are simple-shear dominated. These domains are comparable to splay-dominated and thrust-dominated strike-slip shear zones. The kinematic transition along the Ghadir shear belt is consistent with separate strike-slip and thrustsense shear zones. The earlier fabric(S1), is locally recognized in low strain areas and SW-ward thrusts. S2 is associated with a shallowly plunging stretching lineation(L2), and defines ～NW-SE major upright macroscopic folds in the East Ghadir shear belt. F2 folds are superimposed by ～NNW–SSE tight-minor and major F3 folds that are kinematically compatible with sinistral transpressional deformation along the West Ghadir Shear Zone and may represent strain partitioning during deformation. F2 and F3 folds are superimposed by ENE–WSW gentle F4 folds in the Ambaut shear belt. The sub-parallelism of F3 and F4 fold axes with the shear zones may have resulted from strain partitioning associated with simple shear deformation along narrow mylonite zones and pure shear-dominant deformation in fold zones. Dextral ENEstriking shear zones were subsequently active at ca. 595 Ma, coeval with sinistral shearing along NW-to NNW-striking shear zones. The occurrence of upright folds and folds with vertical axes suggests that transpression plays a significant role in the tectonic evolution of the Ghadir shear belt. Oblique convergence may have been provoked by the buckling of the Hafafit gneiss-cored domes and relative rotations between its segments. Upright folds, fold with vertical axes and sinistral strike-slip shear zones developed in response to strain partitioning. The West Ghadir Shear Zone contains thrusts and strikeslip shear zones that resulted from lateral escape tectonics associated with lateral imbrication and transpression in response to oblique squeezing of the Arabian-Nubian Shield during agglutination of East and West Gondwana.  相似文献   

16.
Elastic crack models predict a linear relationship between displacement (u) and rupture (trace) length (L) during slip in a fault zone. Attempts to find universal-scaling laws for L/u, however, have generally failed. Here I propose that these attempts have failed because they do not take into account the changes in the mechanical properties, in particular Young's modulus (stiffness), of the fault zone as it evolves. I propose that Young's modulus affects fault displacement both spatially and temporally: spatially when the trace of a fault at a given time dissects host rocks of different stiffnesses, and temporally when the stiffness of the fault zone itself changes. During the evolution of an active fault zone, the effective Young's modulus of its damage zone and fault core normally decreases, and so does the L/u ratio of the fault. By contrast, during inactive periods sealing and healing of the damage zone and core may increase the stiffness, hence the L/u ratio in subsequent slips. This model predicts that not only will the scaling of L/u within a given fault population vary in space and time, but also that of individual faults. To cite this article: A. Gudmundsson, C. R. Geoscience 336 (2004).  相似文献   

17.
We use InSAR to measure deformation and kinematics of the Mw = 4.9 Borujerd (2005/05/03) and Mw = 6.1 Chalan‐Chulan (2006/03/31) earthquakes that occurred in the Zagros fold‐and‐thrust belt. The focal mechanism of the 2006 event is consistent with right lateral strike‐slip motion and the event ruptured the Dorud‐Borujerd segment of the Main Recent Fault. An Envisat interferogram spanning the 2006 event shows peak ground deformation of 9 cm in the satellite line‐of‐sight along a 10 km long fault portion. The interferogram spanning the 2005 earthquake is rather related to atmospheric artefact than to ground deformation. Dislocation models of the 2006 Chalan‐Chulan event indicate dextral slip amounting to a maximum of 90 cm at a depth of 4 km. The predicted vertical displacements are in good agreement with differential levelling data. The 2006 event filled only a small part of the seismic gap located between large M = 7 events that occurred in 1909 and 1957.  相似文献   

18.
The Chi-Chi 1999 earthquake ruptured the out-of-sequence Chelungpu Thrust Fault (CTF) in the fold-and-thrust belt in Western Central Taiwan. An important feature of this rupture is that the calculated slip increases approximately linearly in the SE–NW convergence plate direction from very little at its deeper edge to a maximum near the surface. We propose here a new explanation for this co-seismic slip distribution based on the study of both stress and displacement over the long-term as well as over a seismic cycle. Over the last 0.5 My, the convergence rate in the mountain front belt is accommodated by the frontal Changhua Fault (Ch.F), the CTF and the Shuangtung Fault (Sh.F). Based on previously published balanced cross sections, we estimate that the long-term slip of the Ch.F and of the CTF accommodate 5–30% and 30–55% of the convergence rate, respectively. This long-term partitioning of the convergence rate and the modeling of inter-seismic and post-seismic displacements suggest that the peculiar linear co-seismic slip distribution is accounted for by a combination of the effect of the obliquity of the CTF to the direction of inter-seismic loading, and of increasing aseismic creep on the deeper part of the Ch.F and CTF. Many previous interpretations of this slip distribution have been done including the effects of material properties, lubrication, site effect, fault geometry and dynamic waves. The importance of these processes with respect to the effects proposed here is still unknown. Taking into account the dip angle of the CTF, asperity dynamic models have been proposed to explain the general features of co-seismic slip distribution. In particular, recent works show the importance of heterogeneous spatial distribution of stress prior to the Chi-Chi earthquake. Our analysis of seismicity shows that previous large historic earthquakes cannot explain the amplitude of this heterogeneity. Based on our approach, we rather think that the high stress in the northern part of the CTF proposed by Oglesby and Day [Oglesby, D.D., Day, S.M., 2001. Fault geometry and the dynamics of the 1999 Chi-Chi (Taiwan) earthquake. Bull. Seismol. Soc. Am. 91, 1099–1111] reflects the latitudinal variation of inter-seismic coupling due to the obliquity of the CTF.  相似文献   

19.
Numerous ultramafic xenoliths occur within the A??n–Temouchent volcanic complex (Northwestern Oranie, Algeria). Most of them are type I mantle tectonites (lherzolites and harzburgites) and composite xenoliths (harzburgite/clinopyroxenite) are rare. Only a few samples of spinel lherzolites display relatively fertile compositions when the major part of type I xenoliths have refractory major element compositions but enriched LREE contents showing that they have been affected by mantle metasomatism. The composite xenoliths are witnesses of reactions of alkaline magmas with the upper mantle. An asthenospheric rising, in relation with the large strike slip fault affecting the North African plate margin at Trias time is proposed as a possible geodynamical setting. To cite this article: M. Zerka et al., C. R. Geoscience 334 (2002) 387–394.  相似文献   

20.
The eastern Tunisian Atlas shows major subsurface faults: the Kairouan–Sousse Fault (FKS), to the north, and the El Hdadja fault (FEH), to the south. The FKS is an inherited structural trend active since Late Cretaceous times. This fault is an eastern splay of the Chérichira–Labeïd fault. It separates a large northern diapiric structure (Ktifa Diapir) from a subsident domain (the Kairouan–El Hdadja rim-syncline), with a pull-apart configuration to the south. The latter area, which appears to be an inherited weakness zone at the range border, has recorded a series of tectonic events that characterizes the Alpine structural development in Tunisia. To cite this article: S. Khomsi et al., C. R. Geoscience 336 (2004).  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号